| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 60383-1-1993 | 标称电压1000V以上的架空线路用绝缘子 第1部分:交流系统用陶瓷或玻璃绝缘子单元 定义、试验方法和验收准则 | Insulators for overhead lines with nominal voltage above 1000 V; part 1: ceramic or glass insulator units for a.c. systems; definitions, test methods and acceptance criteria |
| IEC 60383-2-1993 | 标称电压1000V以上的架空线路用绝缘子 第2部分:交流系统用绝缘子串和绝缘子组 定义、试验方法和验收准则 | Insulators for overhead lines with a nominal voltage above 1000 V; part 2: insulator strings and insulator sets for a.c. systems; definitions, test methods and acceptance criteria |
| IEC 60591-1978 | 公称电压高于1000v的架空线路用陶瓷材料或玻璃绝缘子采用统计控制方法进行机械和机电试验时的取样规则和验 | Sampling rules and acceptance criteria when applying statistical control methods for mechanical and electromechanical tests on insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V |
| IEC 60839-1-2-1987 | 报警系统 第1部分:一般要求 第2节:电源、试验方法和性能准则 | Alarm systems. Part 1: General requirements. Section Two - Power units, test methods and performance criteria. |
| IEC 60960-1988 | 核电站安全参数显示系统的功能设计准则 | Functional design criteria for a safety parameter display system for nuclear power stations |
| IEC 60988-1990 | 探测松动部件的声音监测系统 性能、设计准则和操作程序 | Acoustic monitoring systems for loose parts detection; characteristics, design criteria and operational procedures |
| IEC 61031-1990 | 核电厂正常工况和预计运行事件期间的固定区域γ辐射剂量率监测设备的设计、安装和应用准则 | Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use in nuclear power plants during normal operation and anticipated operational occurrences |
| IEC 61109 AMD 1-1995 | 标称电压大于1000V的交流架空线路用复合绝缘子 定义、试验方法和验收准则 修改1 | Composite insulators for a.c. overhead lines with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria; Amendment 1 |
| IEC 61109-1992 | 标称电压大于1000V的交流架空线路用复合绝缘子 定义、试验方法和验收准则 | Composite insulators for a.c. overhead lines with a nominal voltage greater than 1000 V; definitions, test methods and acceptance criteria |
| IEC 61325-1995 | 标称电压1000V以上的架空线用绝缘子 直流系统用陶瓷或玻璃绝缘子单元 定义、试验方法和验收准则 | Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitons, test methods and acceptance criteria |
| IEC/TR 60638-1979 | 牵引用旋转电机换向的评定和确定等级准则 | Criteria for assessing and coding of the commutation of rotating electrical machines for traction |
| ISO 10099-2001 | 气压传动 缸筒 最终检验和验收准则 | Pneumatic fluid power - Cylinders - Final examination and acceptance criteria |
| ISO 11169-1993 | 林业机械 轮式专用机器 词汇、性能试验方法和制动系统准则 | Machinery for forestry; wheeled special machines; vocabulary, performance test methods and criteria for brake systems |
| ISO 11217-1993 | 航空航天 液压系统液体污染物 取样点位置和取样准则 | Aerospace; hydraulic system fluid contamination; location of sampling points and citeria for sampling |
| ISO 11306-1998 | 金属与合金的腐蚀 对海水表面的金属和合金的暴露和评估准则 | Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water |
| ISO 12790-1-2001 | 辐射防护 放射生物分析行为准则 第1部分：一般原则 | Radiation protection - Performance criteria for radiobioassay - Part 1: General principles |
| ISO 129-1-2004 | 技术绘图.尺寸和公差的表示.第1部分:一般准则 | Technical drawings - Indication of dimensions and tolerances - Part 1: General principles |
| ISO 14111-1997 | 天然气 分析溯源性准则 | Natural gas - Guidelines for traceability in analysis |
| ISO 14146-2000 | 辐射防护 Χ辐射和γ辐射个人剂量计处理器定期评价准则和性能限值 | Radiation protection - Criteria and performance limits for the periodic evaluation of processors of personal dosemeters for X and gamma radiation |
| ISO 16049-1-2001 | 航空货运设备 紧固带 第1部分：设计准则及试验方法 | Air cargo equipment - Restraint straps - Part 1: Design criteria and testing methods |
| ISO 16100-4-2006 | 工业自动化系统和集成.制造软件互操作性的能力模型.第4部分:一致性试验方法、准则和报告 | Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 4: Conformance test methods, criteria and reports |
| ISO 18413-2002 | 液压传动.零件和元件的清洁度.与污染物的收集、分析和数据报告相关的检验文件和准则 | Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting |
| ISO 3601-3-2005 | 流体动力系统.O型密封圈.第3部分:质量验收准则 | Fluid power systems - O-rings - Part 3: Quality acceptance criteria |
| ISO 7728-1985 | 一块预制普通混凝土外墙构件和一块混凝土楼板之间的典型水平接缝 性能、特征和分类准则 | Typical horizontal joints between an external wall of prefabricated ordinary concrete components and a concrete floor; Properties. characteristics and classification criteria |
| ISO 7729-1985 | 两块预制普通混凝土外墙构件之间的典型垂直接缝 性能、特征和分类准则 | Typical vertical joints between two prefabricated ordinary concrete external wall components; Properties, characteristics and classification criteria |
| ISO 7919-1-1996 | 非往复式机器的机械振动 旋转轴的测量和评定准则 第1部分:总则 | Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 1: General guidelines |
| ISO 7919-3 Technical Corrigendum 1-2007 | 非往复式机器的机械振动.旋转轴的测量和评定准则.第3部分:连接工业机械.技术勘误1 | Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 3: Coupled industrial machines; Technical Corrigendum 1 |
| ISO 7919-3-1996 | 非往复式机器的机械振动 旋转轴的测量和评定准则 第3部分:耦合工业机械 | Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 3: Coupled industrial machines |
| ISO 7919-4-1996 | 非往复式机器的机械振动 旋转轴的测量和评定准则 第4部分:燃气轮机组 | Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Part 4: Gas turbine sets |
| ISO 8399-1-1998 | 航空航天 附件驱动和安装法兰(米制系列) 第1部分:设计准则 | Aerospace - Accessory drives and mounting flanges (Metric series) - Part 1: Design criteria |
| ISO 8821-1989 | 机械振动 平衡轴与配合件的键准则 | Mechanical vibration; balancing; shaft and fitment key convention |
| ISO 9110-1-1990 | 液压传动 测量技术 第1部分:通用测量准则 | Hydraulic fluid power; measurement techniques; part 1: general measurement principles |
| ISO/IEC 17020-1998 | 各类检查机构运行的一般准则 | General criteria for the operation of various types of bodies performing inspection |
| ISO/IEC Guide 59-1994 | 标准化良好运行准则 | Code of good practice for standardization |
| ISO/TR 13763 Technical Corrigendum 1-1996 | 无缝气瓶的安全和性能准则 技术勘误1 | Safety and performance criteria for seamless gas cylinders; Technical Corrigendum 1 |
| ISO/TR 13763-1994 | 无缝气瓶的安全和性能准则 | Safety and performance criteria for seamless gas cylinders |
| 编号 | 中文名称 | 英文名称 |