| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 1045-1 Berichtigung 2-2005
|
混凝土、加筋和预应力混凝土结构.第1部分:设计和施工.DIN 1045-1-2001的勘误
|
Concrete, reinforced and prestressed concrete structures - Part 1: Design and construction, Corrigenda to DIN 1045-1:2001-07
|
| DIN 1045-1-2001
|
加筋和预应力混凝土构件.第1部分:设计
|
Concrete, reinforced and prestressed concrete structures - Part 1: Design and construction
|
| DIN 1045-100-2005
|
加筋和预应力混凝土结构.第100部分:砖地
|
Concrete, reinforced and prestressed concrete structures - Part 100: Brick floors
|
| DIN 1045-2-2001
|
混凝土、加筋和预应力混凝土结构.第2部分:混凝土:性能、生产和一致性规范.DIN EN 206-1的应用规则
|
Concrete, reinforced and prestressed concrete structures - Part 2: Concrete; Specification, properties, production and conformity; Application rules for DIN EN 206-1
|
| DIN 1045-2/A1-2005
|
加筋和预应力混凝土结构.第2部分:混凝土规范、特性、生产和一致性.DIN EN 206-1的应用规则.修改件A1
|
Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, properties, production and conformity; Application rules for DIN EN 206-1; Amendment A1
|
| DIN 1045-3-2001
|
混凝土、加筋和预应力混凝土结构.第3部分:结构实施
|
Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures
|
| DIN 1045-3/A1-2005
|
加筋和预应力混凝土结构.第3部分:结构物的施工.修改件A1
|
Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures; Amendment A1
|
| DIN 1045-4-2001
|
混凝土、加筋和预应力混凝土结构.第4部分:预制元件生产和一致性控制的附加规则
|
Concrete, reinforced and prestressed concrete structures - Part 4: Additional rules for the production and conformity control of prefabricated elements
|
| DIN 1048-2-1991
|
混凝土检验法.第2部分:硬化混凝土的检验 (现场取样)
|
Testing concrete; testing of hardened concrete (specimens taken in situ)
|
| DIN 1048-4-1991
|
混凝土检验法.构件和部件的硬化混凝土抗压强度的测定.第4部分:基准线的应用和用特殊方法进行的评价
|
Test methods for concrete; determination of the compressive strength in hardened concrete in structures and components; application of reference lines and evaluation with special methods
|
| DIN 1075-1981
|
混凝土桥.定尺寸和施工
|
Concrete bridges; Dimensioning and construction
|
| DIN 1080-3-1980
|
土木工程术语、符号和单位.混凝土和钢筋混凝土结构、预应力混凝土结构、砖石结构
|
Terms, Symbols and Units Used in Civil Engineering; Concrete Construction and Reinforced Concrete Construction, Prestressed Concrete Construction, Masonry Construction
|
| DIN 1080-4-1980
|
土木建筑工程用术语、符号和单位.混凝土结构、复合钢结构和混凝土中的钢大梁
|
Terms, Symbols and Units Used in Civil Engineering; Concrete Construction, Composite Steel Construction and Steel Girders in Concrete
|
| DIN 11622-2-2004
|
青贮料和厩液容器.第2部分:设计原则.加筋混凝土、加筋混凝土预制件、混凝土块和混凝土模板块制青贮料和厩液
|
Silage and liquid manure containers - Part 2: Design principles - Silage and liquid manure containers made of reinforced concrete, precast reinforced concrete elements, concrete blocks and concrete blocks acting as lost formwork
|
| DIN 11622-21-2004
|
青贮料和厩液容器.第21部分:混凝土块
|
Silage and liquid manure containers - Part 21: Concrete blocks
|
| DIN 11622-22-2004
|
青贮料和厩液容器.第22部分:混凝土模板块
|
Silage and liquid manure containers - Part 22: concrete blocks acting as lost formwork
|
| DIN 1211-1-2003
|
人孔错列阶梯脚扣.第1部分:砌墙或浇灌混凝土阶梯脚扣
|
Step irons for staggered manhole steps - Part 1: Step irons to be fitted in masonry or set into concrete
|
| DIN 1211-2-2003
|
人孔错列阶梯脚扣.第2部分:浇入混凝土预制件的阶梯脚扣
|
Step irons for staggered manhole steps - Part 2: Step irons to be set into prefabricated concrete units
|
| DIN 1212-1-2003
|
人孔直立错列阶梯脚扣.第1部分:砌墙或浇灌混凝土阶梯脚扣
|
Step irons with upstand for staggered manhole steps - Part 1: Step irons to be fitted in masonry or set into concrete
|
| DIN 1212-2-2003
|
人孔直立错列阶梯脚扣.第2部分:浇入混凝土预制件的阶梯脚扣
|
Step irons with upstand for staggered manhole steps - Part 2: Step irons to be set into prefabricated concrete units
|
| DIN 1236-1-1981
|
A和B类排水沟用的混凝土构件和斗件.结构、安装和组件
|
Class A and class B concrete elements and buckets for gullies; Design; installation and assemblies
|
| DIN 1236-2-1981
|
A和B类排水沟用的混凝土构件和斗件.混凝土构件
|
Classe A and class B concrete elements and buckets for gullies; Concrete elements
|
| DIN 1236-3-1981
|
A和B类排水沟用的混凝土构件和斗件.斗件
|
Classes A and B concrete elements and buckets for gullies; Buckets
|
| DIN 18057-2005
|
混凝土窗.尺寸计算、要求、试验
|
Concrete windows - Dimensioning, requirements, tests
|
| DIN 18093-1987
|
防火间隔.防火砌墙或混凝土墙壁中防火门的安装.固定位置，形状和安装
|
Fire barriers; installation of fire doors in fireproof masonry or concrete walls; position and shapes of anchorages, installation
|
| DIN 18147-2-1982
|
三层烟囱用建筑材料和建筑部件.外层用的轻质混凝土元件.要求及检验
|
Building material and building elements for three-layered chimneys; elements of light-weight concrete for the outer layer; requirements and tests
|
| DIN 18147-3-1982
|
三层烟囱用建筑材料和建筑部件.内层用轻质混凝土元件.要求及检验
|
Building material and building elements for three-layered chimneys; elements of light-weight concrete for the inner layer; requirements and tests
|
| DIN 18148-2000
|
轻质混凝土空心壁板
|
Lightweight-concrete hollow-boards
|
| DIN 18150-1-1979
|
烟囱建造用建筑材料和构件.第1部分:轻型混凝土烟道、同质烟囱、要求
|
Building materials and components for building chimneys; lightweight concrete flues, homogenous chimneys, requirements
|
| DIN 18150-2-1987
|
一层烟囱用建筑材料和部件.轻质混凝土制烟道.检验和监督
|
Building material and elements for one-layered chimneys; lightweight concrete flues; examination and supervision
|
| DIN 18162-2000
|
轻质混凝土.无钢筋墙板
|
Lightweight concrete wallboards - unreinforced
|
| DIN 18178-1972
|
混凝土和钢筋混凝土制烟道.烟道通风罩和烟道底座.尺寸.要求.检验
|
Concrete and reinforced concrete ducts; hoods and bases for ducts, dimensions, requirements, testing
|
| DIN 18203-1-1997
|
建筑施工尺寸公差.混凝土预制件.钢筋混凝土预制件和预应力混凝土制件
|
Tolerances in building construction - Part 1: Prefabricated components made of concrete, reinforced concrete and prestressed concrete
|
| DIN 18215-1973
|
混凝土与钢筋混凝土建筑物用木制模板.标准尺寸0.5m×1.5m厚21mm
|
Timer form boards for concrete and reinforced concrete structures; standard dimension 0,50 m × 1,50 m; thickness = 21 mm
|
| DIN 18217-1981
|
混凝土面及模板表面
|
Concrete surfaces and formwork surface
|
| DIN 18218-1980
|
新浇混凝土对垂直模板的压力
|
Pressure of fresh concrete on vertical formwork
|
| DIN 18551-2005
|
喷射混凝土.规范、生产、设计与一致性
|
Shotcrete - Specification, production, design and conformity
|
| DIN 19555 Berichtigung 1-2006
|
单行安装的阶梯脚扣.镶嵌在混凝土中的阶梯脚扣.DIN 19555-2003的勘误
|
Step irons for single-line installation - Step irons for setting in concrete, Corrigenda to DIN 19555:2003-04
|
| DIN 19555-2003
|
单线安装的阶梯脚扣.镶嵌在混凝土中的阶梯脚扣
|
Step irons for single-line installation - Step irons for setting in concrete
|
| DIN 19585-1976
|
下水道管件.铸铁管件、混凝土管件及与铸铁相连的混凝土制管件的交货技术条件
|
Sewage fittings; technical specifications for delivery for fittings from cast iron, concrete and concrete in connection with cast iron
|
| DIN 19695-1977
|
混凝土管、钢筋混凝土管及预应力混凝土管、管件和混凝土检查井的筒圈的运输和储存说明书
|
Directions for transporting and storing of concrete pipes, reinforced concrete pipes, prestressed concrete pipes and fittings and concrete manhole shaft rings
|
| DIN 19720-1991
|
地面混凝土箱涵的混凝土地板.尺寸和类型
|
Concrete ground plates for surface boxes; dimensions, types
|
| DIN 21525-1964
|
地下巷道支护用混凝土块
|
Concrete blocks to support undergroundroads
|
| DIN 2410-3-1978
|
管件.混凝土、钢筋混凝土和预应力混凝土管件的标准的综述
|
Pipes; Survey of Standards for Pipes from Concrete, Reinforced Concrete and Prestressed Concrete
|
| DIN 24117-1987
|
建筑机械和建筑材料工业用机械.混凝土泵用分配杆.计算原则和稳定性
|
Machines for the building and building-material industries; distributing mast for concrete pumps; principles of calculation and stability
|
| DIN 24118-1984
|
建筑机械和建筑材料机械.混凝土输送管道.尺寸
|
Construction machines and machines for building materials; concrete delivery pipelines; dimensions
|
| DIN 25413-1-1991
|
屏蔽混凝土按元件比例分类.第1部分:中子射线的屏蔽
|
Classification of shielding concretes by proportion of elements; neutron shielding
|
| DIN 25413-2-1991
|
屏蔽混凝土按元件比例分类.第2部分:γ射线的屏蔽
|
Classification of shielding concretes by proportion of elements; gamma shielding
|
| DIN 25420-1 Bb.1-1997
|
混凝土热室的建造.第1部分:遥控热室要求.设计举例
|
Construction of concrete hot cells - Part 1: Requirements for remotely operated cells; design examples
|
| DIN 25420-1 Bb.2-1992
|
混凝土热室的建造.对遥控热室的要求.屏蔽计算
|
Construction of concrete hot cells; requirements for remotely operated cells; shielding calculation
|
| DIN 25420-1-1990
|
混凝土热室的建造.对远距离操作室的要求
|
Construction of concrete hot cells; requirements for remotely operated cells
|
| DIN 25420-2 Bb.1-1989
|
混凝土热室的建造.加工室和贮藏库的要求.第2 Bb 1部分:性能示例
|
Construction of concrete hot cells; requirements of processing and storage cells; examples of performance
|
| DIN 25420-2-1990
|
混凝土热室的建造.对操作室和储存室的要求
|
Construction of concrete hot cells; requirements for processing and storage cells
|
| DIN 25420-3 Bb.1-2000
|
混凝土热室的建造.第3部分:对于不同密度混凝土墙上辐射防护窗的要求.安装导则
|
Construction of concrete hot cells - Part 3: Requirements for shielding windows for concrete walls with different densities; installation guidelines
|
| DIN 25420-3-2000
|
混凝土热室的建造.第3部分:对于不同密度混凝土墙上辐射防护窗的要求
|
Construction of concrete hot cells - Part 3: Requirements for shielding windows for concrete walls with different densities
|
| DIN 25420-4-2000
|
混凝土热室的建造.第4部分:对密度为2.3g/cm3的不同厚度混凝土墙上辐射防护窗的要求
|
Construction of concrete hot cells - Part 4: Requirements of shielding windows for concrete walls density 2,3 g/cm<(hoch)3> with different thicknesses
|
| DIN 25427-1-1977
|
防γ射线辐射的混凝土屏蔽墙中双弯充气管道的设计.术语和条件
|
Design of Gas-filled Double-bend Ducts in Concrete Shields against Gamma Radiation; Terms and Conditions
|
| DIN 25449-1987
|
核电站中钢筋混凝土构件承受因内部故障引起的负荷的设计准则
|
Design criteria for reinforced concrete subject to loadings as a result of internal incidents in nuclear power plants
|
| DIN 28052-1-2001
|
化工装置.使用非金属材料对工艺流程设备的混凝土构件的表面处理.第1部分:术语和选择标准
|
Chemical apparatus - Surface treatment of concrete components in process plants using nonmetallic materials - Part 1: Terms, selection criteria
|
| DIN 28052-3-1994
|
化工设备.工艺流程设备中使用非金属材料对混凝土构件作表面处理.第3部分:有机物涂层
|
Chemical apparatus - Surface treatment of concrete components in process plants using nonmetallic materials - Part 3: Organic coatings
|
| DIN 28052-5-1997
|
化工设备.工艺技术设备中混凝土构件非金属材料表面处理.第5部分:合成涂层
|
Chemical apparatus - Surface treatment of concrete components in process plants using non-metallic materials - Part 5: Combined coatings
|
| DIN 28052-6-2001
|
化工设备.加工厂使用非金属材料对混凝土构件的表面处理.第6部分:试验方法
|
Chemical apparatus - Surface treatment of concrete components in process plants using non-metallic materials - Part 6: Test methods
|
| DIN 4030-1-1991
|
对混凝土有侵蚀性的水、土壤和气体的评估.第1部分:原则和极限值
|
Assessment of water, soil and gases for their aggressiveness to concrete; principles and limiting values
|
| DIN 4030-2-1991
|
对混凝土有侵蚀性的水、土壤和气体的评估.第2部分:水和土壤的取样和分析
|
Assessment of water, soil and gases for their aggressiveness to concrete; collection and examination of water and soil samples
|
| DIN 4034-10-1995
|
预制混凝土和钢筋混凝土井筒和检验室.第10部分:地下敷设排水管道用砖砌井筒底部.要求和检验
|
Prefabricated concrete and reinforced concrete manholes and inspection chambers - Part 10: Brick manhole bases for buried drains and sewers; requirements and testing
|
| DIN 4034-2-1990
|
通风井和排水坑用预制混凝土和钢筋混凝土部件.第2部分:尺寸与交货技术条件
|
Precast unreinforced and reinforced concrete components for well shafts and soakaways; dimensions and technical delivery conditions
|
| DIN 4052-1-2006
|
道路排水沟的混凝土构件和斗式地漏.第1部分:一般要求和安装
|
Concrete elements and buckets for road gullies - Part 1: General requirements and installation
|
| DIN 4052-2-2006
|
道路排水沟的混凝土构件和斗式地漏.第4部分:概要和名称与符号
|
Concrete elements and buckets for road gullies - Part 2: Summary and designations
|
| DIN 4052-3-2006
|
公路排水沟用混凝土构件和斗式地漏.第3部分:混凝土构件
|
Concrete elements and buckets for road gullies - Part 3: Concrete elements
|
| DIN 4052-4-2006
|
道路排水沟的混凝土构件和斗式地漏.第4部分:斗式地漏
|
Concrete elements and buckets for road gullies - Part 4: Buckets
|
| DIN 4158-1978
|
钢筋混凝土和预应力混凝土地板填充混凝土接缝
|
Filler concrete joists for reinforced and prestressed concrete floors
|
| DIN 4166-1997
|
加气混凝土厚板和平板
|
Autoclaved aerated concrete slabs and panels
|
| DIN 4212-1986
|
加筋混凝土和预应力混凝土起重机轨道.设计和施工
|
Reinforced concrete and prestressed concrete craneways; design and construction
|
| DIN 4213-2003
|
轻骨料混凝土预制增强构件透空式结构粘合
|
Application in structures of prefabricated reinforced components of lightweight aggregate concrete with open structure
|
| DIN 4223-1-2003
|
蒸压加气混凝土预制加筋部件.第1部分:生产、特性和合格评定
|
Prefabricated reinforced components of autoclaved aerated concrete - Part 1: Manufacturing, properties, attestation of conformity
|
| DIN 4223-2-2003
|
蒸压加气混凝土预制加筋部件.第2部分:结构部件设计和计算
|
Prefabricated reinforced components of autoclaved aerated concrete - Part 2: Design and calculation of structural components
|
| DIN 4223-3-2003
|
高压蒸养加气混凝土的预制加筋部件.第3部分:非结构部件的设计和计算
|
Prefabricated reinforced components of autoclaved aerated concrete - Part 3: Design and calculation of non stuctural components
|
| DIN 4223-4-2003
|
高压蒸养加气混凝土的预制加筋部件.第4部分:结构部件的设计和计算.结构部件的应用
|
Prefabricated reinforced components of autoclaved aerated concrete - Part 4: Design and calculation of structural components; Application of components in structures
|
| DIN 4223-5-2003
|
蒸压加气混凝土预制加筋部件.第5部分:安全性原则
|
Prefabricated reinforced components of autoclaved aerated concrete - Part 5: Safety concept
|
| DIN 4226-100-2002
|
混凝土和灰浆集料.第100部分:回收的集料
|
Aggregates for concrete and mortar - Part 100: Recycled aggregates
|
| DIN 4235-1-1978
|
采用振荡法压实混凝土.第1部分:振荡器和振荡机械
|
Compacting of Concrete by Vibrating; Vibrators and Vibration Mechanics
|
| DIN 4235-2-1978
|
采用振动法压实混凝土.第2部分:用插入式振荡器压实
|
Compacting of Concrete by Vibrating; Compacting by Internal Vibrators
|
| DIN 4235-3-1978
|
采用振荡法压实混凝土.第3部分:生产预制件时用外部外部振荡器压实
|
Compacting of Concrete by Vibrating; Compacting by External Vibrators during the Manufacture of Precast Components
|
| DIN 4235-4-1978
|
采用振荡法压实混凝土.第4部分:用模板振荡器现场压实
|
Compacting of Concrete by Vibrating; Compacting of In-situ by Formwork Vibrators
|
| DIN 4235-5-1978
|
采用振荡法压实混凝土.第5部分:用表面振荡器压实
|
Compacting of Concrete by Vibrating; Compacting by Surface Vibrators
|
| DIN 4262-3-1991
|
高速公路和土木工程用混凝土排水管和多用连管.第3部分:要求和检验
|
Concrete drainage pipes and multipurpose pipes for highway and civil engineering purposes; requirements and testing
|
| DIN 4266-3-1992
|
掩埋的混凝土排放管.要求、检验和控制
|
Concrete drainage pipes for landfills; requirements, testing and control
|
| DIN 4281-1998
|
下水道装置用混凝土.生产、要求、试验和质量控制
|
Concrete for prefabricated sewage units - Manufacture, requirements, testing and quality control
|
| DIN 45635-62-1989
|
机器排放的空气传播噪声的测量.第62部分:包洛面法.混凝土砖块、板条、管道和预制件生产用机器和设备
|
Measurement of airborne noise emitted by machines; enveloping surface method; machines and equipment for the manufacture of concrete blocks, slabs, pipes and prefabricated elements
|
| DIN 459-1-1995
|
建筑材料机械.混凝土和灰浆用搅拌机.第1部分:性能和尺寸的术语和定义
|
Building material machines - Mixers for concrete and mortar - Part 1: Terms, determination of performance, sizes
|
| DIN 459-2-1995
|
建筑材料机械.混凝土和灰浆用搅拌机.第2部分:混凝土搅拌机的搅拌效率的检验规程
|
Building material machines - Mixers for concrete and mortar - Part 2: Procedure for the examination of the mixing efficiency of concrete mixers
|
| DIN 483-2005
|
混凝土路缘石块体.形状、尺寸和标记
|
Concrete kerb units - Shapes, dimensions, marking
|
| DIN 48353-1-1965
|
第1部分:最高可达20kV的单工电路用钢筋混凝土天线杆
|
Steel-concrete masts for simplex circuits up to 20 kV
|
| DIN 48353-2-1965
|
钢筋混凝土天线杆第2部分:天线杆的选则指导
|
Steel-concrete masts; directions for choosing the masts
|
| DIN 51290-1-1991
|
机器工程用聚合物混凝土(反应性树脂混凝土)的检验.第1部分:术语
|
Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; terminology
|
| DIN 51290-2-1991
|
机器工程用反应性树脂混凝土的检验.第2部分:粘合剂、填充剂和反应性树脂混合物的检验
|
Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of binders, fillers and reaction resin compounds
|
| DIN 51290-3-1991
|
机器工程用反应性树脂混凝土的检验.第3部分:分别制作试样的检验
|
Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of separatly manufactured specimens
|
| DIN 51290-4-1991
|
机器工程用反应性树脂混凝土的检验.第4部分:生产过程中和成品部件的检验
|
Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; in-process testing and testing of final parts
|
| DIN 52170-1-1980
|
硬化混凝土成分的测定.概述、术语、取样、毛体积干密度
|
Determination of composition of hardened concrete; general, terms, sampling, dry-bulk density
|
| DIN 52170-2-1980
|
硬化混凝土成分的测定.不溶于盐酸的含石灰石和/或白云石的集料.原材料不供应
|
Determination of composition of hardened concrete; hydrochloric acid insoluble, limestone and/or dolomite containing aggregate, materials used for the concrete not available
|
| DIN 52170-3-1980
|
硬化混凝土成分的测定.不溶于盐酸的集料.不提供混凝土用材料
|
Determination of composition of hardened concrete; hydrochloric acid insoluble aggregate, materials used for the concrete not available
|
| DIN 52170-4-1980
|
硬化混凝土成分的测定.溶于盐酸的和/或不溶于盐酸的集料.全部或部分供应混凝土中使用的材料
|
Determination of composition of hardened concrete; hydrochloric acid soluble and/or insoluble aggregate, materials used for the concrete totally or partly available
|
| DIN 52252-1-1986
|
饰面砖和矿渣混凝土砌块的抗冻试验.单块砖的所有面的冷冻
|
Testing the frost resistance of facing bricks and clinker blocks; freezing of single bricks on all sides
|
| DIN 52252-2-1986
|
饰面砖和矿渣混凝土砌块的抗冻试验.按检验批中排列砖的冷冻
|
Testing the frost resistance of facing bricks and clinker blocks; freezing of bricks arranged in test blocks
|
| DIN 68791-1979
|
混凝土和钢筋混凝土用加芯胶合板的大面积模板
|
Large area shuttering panels of core plywood for concrete and reinforced concrete
|
| DIN 68792-1979
|
混凝土和钢筋混凝土用饰面胶合板的大面积模板
|
Large area shuttering panels of veneer plywood for concrete and reinforced concrete
|
| DIN 7865-1-1982
|
混凝土接缝密封用的弹性填缝片.形状和尺寸
|
Elastomeric joint sealing strip for sealing joints in concrete; Shape and dimensions
|
| DIN 7865-2-1982
|
混凝土接缝密封用的弹性填缝片.对材料的要求和检验
|
Elastomeric joint sealing strip for sealing joints in concrete; Material requirements and testing
|
| DIN CEN/TS 14038-1-2005
|
加筋混凝土的电化学realkalization和氯化物萃取处理.第1部分:realkalization
|
Electrochemical realkalization and chloride extraction treatments for reinforced concrete - Part 1: Realkalization; German version CEN/TS 14038-1:2004
|
| DIN CEN/TS 15087-2006
|
屋顶用已装粘土和混凝土嵌合瓦片的抗隆起性测定.机械紧固件的试验方法.德文版本CEN/TS 15087-2005
|
Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing - Test method for mechanical fasteners; German version CEN/TS 15087:2005
|
| DIN EN 1008-2002
|
混凝土用搅拌水.作为混凝土搅拌水包括混凝土工业加工回收水的适用性的取样、试验和评估规范; 德文版本 EN 1
|
Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete; German version EN 1008:2002
|
| DIN EN 10080-2005
|
混凝土加筋用钢.可焊性钢筋.总则
|
Steel for the reinforcement of concrete - Weldable reinforcing steel - General; German version EN 10080:2005
|
| DIN EN 1062-1-2004
|
色漆和清漆.外部砖石和混凝土用涂层材料和涂层系统.第1部分:分类
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification; German version EN 1062-1:2004
|
| DIN EN 1062-11 Berichtigung 1-2005
|
色漆和清漆.外部砖石建筑和混凝土用覆层材料和涂覆系统.第11部分:试验前的调节方法.对DIN EN 1062-11-2002
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing; German version EN 1062-11:2002, Corrigenda to DIN EN 1062-11:2002-10; German version EN 1062-11:2002/AC:2005
|
| DIN EN 1062-11-2002
|
色漆和清漆.外部砖石建筑和混凝土用覆层材料和涂覆系统.试验前的修整方法
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 11: Methods of conditioning before testing; German version EN 1062-11:2002
|
| DIN EN 1062-3-1999
|
油漆和清漆.外部砌砖体和混凝土用涂层材料和涂层系统.第3部分:液体－水传输(渗透)率的测定和分类
|
Paints and varnishes - Coating materials and coating system for exterior masonry and concrete - Part 3: Determination and classification of liquid-water transmission rate (permeability); German version EN 1062-3:1998
|
| DIN EN 1062-6-2002
|
涂料和清漆.外墙砖石和混凝土用涂层材料和涂覆系统.第6部分:二氧化碳渗透性测定
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability; German version EN 1062-6:2002
|
| DIN EN 1062-7-2004
|
清漆和涂料.外部砖石和混凝土用涂层材料和涂层系统.第7部分:裂缝遮避性能的测定
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties; German version EN 1062-7:2004
|
| DIN EN 1128-1995
|
混凝土粘接碎料板.耐硬物冲击性测定
|
Cement-bounded particleboards - Determination of hard body impact resistance; German version EN 1128:1995
|
| DIN EN 1168-2005
|
预制混凝土产品.空芯板
|
Precast concrete products - Hollow core slabs; German version EN 1168:2005
|
| DIN EN 1169-1999
|
混凝土预制件.玻璃纤维增强混凝土工厂生产控制一般规则
|
Precast concrete products - General rules for factory production control of glass-fibre reinforced cement; German version EN 1169:1999
|
| DIN EN 1170-1-1998
|
混凝土预制件.玻璃纤维增强混凝土的试验方法.第1部分:基质一致性的测量.坍落试验法
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix; "Slump test" method; German version EN 1170-1:1997
|
| DIN EN 1170-2-1998
|
混凝土预制件.玻璃纤维增强混凝土用检验方法.第2部分:新鲜的玻璃纤维混凝土中纤维含量的测定.冲洗试验
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC; "wash out test"; German version EN 1170-2:1997
|
| DIN EN 1170-3-1998
|
混凝土预制件.玻璃纤维增强混凝土试验方法.第3部分:喷射GRC中纤维含量测量
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC; German version EN 1170-3:1997
|
| DIN EN 1170-4-1998
|
混凝土预制件.玻璃纤维增强混凝土试验方法.第4部分:抗弯强度测量.简化抗弯试验法
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997
|
| DIN EN 1170-5-1998
|
混凝土预制件.玻璃纤维增强混凝土试验方法.第5部分:抗弯强度测量.完整抗弯试验法
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength; "complete bending test" method; German version EN 1170-5:1997
|
| DIN EN 1170-6-1998
|
混凝土预制件.玻璃纤维增强混凝土试验方法.第6部分:浸入法水吸附和干密度测定
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density; German version EN 1170-6:1997
|
| DIN EN 1170-7-1998
|
混凝土预制件.玻璃纤维增强混凝土试验方法.第7部分:湿度引起尺寸变化极限值测量
|
Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content; German version EN 1170-7:1997
|
| DIN EN 12001-2004
|
混凝土和灰浆用传送、喷射和放置机械.安全要求
|
Conveying, spraying and placing machines for concrete and mortar - Safety requirements; German version EN 12001:2003
|
| DIN EN 12188-1999
|
混凝土支承结构防护和维修用产品和系统.试验方法.通过测定钢板胶粘作用表征结构胶粘剂性能
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents; German version EN 12188:1999
|
| DIN EN 12189-1999
|
混凝土支承结构防护和维修用产品和系统.试验方法.敞开时间测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time; German version EN 12189:1999
|
| DIN EN 12190-1998
|
混凝土支承结构防护和维修用产品和系统.检验方法.维修用灰浆抗压强度测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar; German version EN 12190:1998
|
| DIN EN 12192-1-2002
|
混凝土构件的保护和检修用产品和系统.粒度分析.第1部分:预混合灰浆干成份的检验方法; 德文版本 EN 12192-1:
|
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar; German version EN 12192-1:2002
|
| DIN EN 12192-2-1999
|
混凝土支承结构防护和维修用产品和系统.粒度分析.第2部分;聚合物粘合剂填料检验方法
|
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents; German version EN 12192-2:1999
|
| DIN EN 12269-1-2000
|
通过抗弯试验测定钢筋和高压蒸汽加气混凝土粘性.第1部分:短期试验
|
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test; German version EN 12269-1:2000
|
| DIN EN 12269-2-2004
|
通过抗弯试验测定钢筋和高压蒸氧加气混凝土之间的粘结特性.第2部分:长期试验
|
Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test; German version EN 12269-2:2003
|
| DIN EN 12350-1-2000
|
新浇混凝土试验.第1部分:取样
|
Testing fresh concrete - Part 1: Sampling; German version EN 12350-1:1999
|
| DIN EN 12350-2-2000
|
新浇混凝土试验.第2部分:蹋落度试验
|
Testing fresh concrete - Part 2: Slump test; German version EN 12350-2:1999
|
| DIN EN 12350-3-2000
|
试验新浇混凝土.第3部分:维比稠度试验;德文版本EN 12350-3-1999
|
Testing fresh concrete - Part 3: Vebe test; German version EN 12350-3:1999
|
| DIN EN 12350-4-2000
|
试验用新浇混凝土.第4部分:密实度等级
|
Testing fresh concrete - Part 4: Degree of compactability; German version EN 12350-4:1999
|
| DIN EN 12350-5-2000
|
试验用新浇混凝土.第5部分:流动试验台试验
|
Testing fresh concrete - Part 5: Flow table test; German version EN 12350-5:1999
|
| DIN EN 12350-6-2000
|
新浇混凝土试验.第6部分:密度试验
|
Testing fresh concrete - Part 6: Density; German version EN 12350-6:1999
|
| DIN EN 12350-7-2000
|
新浇混凝土试验.第7部分:空气含量.压力法
|
Testing fresh concrete - Part 7: Air content; Pressure methods; German version EN 12350-7:2000
|
| DIN EN 12390-1 Berichtigung 1-2006
|
硬化混凝土试验.第1部分:试样和模型形状、尺寸和其他要求.DIN EN 12390-5-2001勘误
|
Testing hardened concrete - Part 1: Shape, dimensions and other requirements for test specimens and moulds; German version EN 12390-1:2000, Corrigenda to DIN EN 12390-1:2001-02; German version EN 12390-1:2000/AC:2004
|
| DIN EN 12390-1-2001
|
硬化混凝土试验.第1部分:样品和模型形状、尺寸和其他要求
|
Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds; German version EN 12390-1:2000
|
| DIN EN 12390-2-2001
|
硬化混凝土试验.第2部分:强度试样的制备和处理
|
Testing hardened concrete - Part 2: Making and curing specimens for strength tests; German version EN 12390-2:2000
|
| DIN EN 12390-3-2002
|
硬化混凝土试验.第3部分:试样压缩强度
|
Testing hardened concrete - Part 3: Compressive strength of test specimens; German version EN 12390-3:2001
|
| DIN EN 12390-4-2000
|
硬化混凝土试验.第4部分:压缩强度.试验机规范
|
Testing hardened concrete - Part 4: Compressive strength; Specification for testing machines; German version EN 12390-4:2000
|
| DIN EN 12390-5 Berichtigung 1-2006
|
硬化混凝土试验.第5部分:试样弯曲强度.DIN EN 12390-5-2001勘误
|
Testing hardened concrete - Part 5: Flexural strength of test specimens; German version EN 12390-5:2000, Corrigenda to DIN EN 12390-5:2001-02; German version EN 12390-5:2000/AC:2004
|
| DIN EN 12390-5-2001
|
硬化混凝土试验.第5部分:试样结构强度
|
Testing hardened concrete - Part 5: Textural strength of test specimens; German version EN 12390-5:2000
|
| DIN EN 12390-6 Berichtigung 1-2006
|
硬化混凝土试验.第6部分:试样劈裂拉伸强度.DIN EN 12390-6-2001勘误
|
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German version EN 12390-6:2000, Corrigenda to DIN EN 12390-6:2001-02; German version EN 12390-6:2000/AC:2004
|
| DIN EN 12390-6-2001
|
硬化混凝土试验.第6部分:试样劈裂拉伸强度
|
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens; German version EN 12390-6:2000
|
| DIN EN 12390-7 Berichtigung 1-2006
|
硬化混凝土试验.第7部分:硬化混凝土密度.DIN EN 12390-7-2001勘误
|
Testing hardened concrete - Part 7: Density of hardened concrete; German version EN 12390-7:2000, Corrigenda to DIN EN 12390-7:2001-02; German version EN 12390-7:2000/AC:2004
|
| DIN EN 12390-7-2001
|
硬化混凝土试验.第7部分:硬化混凝土密度
|
Testing hardened concrete - Part 7: Density of hardened concrete; German version EN 12390-7:2000
|
| DIN EN 12390-8-2001
|
硬化混凝土试验.第8部分:加压水渗透深度
|
Testing hardened concrete - Part 8: Depth of penetration of water under pressure; German version EN 12390-8:2000
|
| DIN EN 12446-2003
|
烟囱.元部件.混凝土外壁构件
|
Chimneys - Components - Concrete outer wall elements; German version EN 12446:2003
|
| DIN EN 12504-1-2000
|
结构混凝土试验.第1部分:起棱纹试样.取样、检查和压缩试验
|
Testing concrete in structures - Part 1: Cored specimens; taking, examining, and testing in compression; German version EN 12504-1:2000
|
| DIN EN 12504-2-2001
|
结构混凝土试验.第2部分:无损检测.回弹量测定
|
Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number; German version EN 12504-2:2001
|
| DIN EN 12504-3-2005
|
结构中的混凝土试验.第3部分:拔出力的测定
|
Testing concrete in structures - Part 3: Determination of pull-out force; German version EN 12504-3:2005
|
| DIN EN 12504-4-2004
|
结构中的混凝土试验.第4部分:超音波脉冲速率的测定
|
Testing concrete in structures - Part 4: Determination of ultrasonic pulse velocity; German version EN 12504-4:2004
|
| DIN EN 12614-2005
|
混凝土结构物的防护和修理用产品和系统.试验方法.聚合物玻璃化转变温度的测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of glass transition temperatures of polymers; German version EN 12614:2004
|
| DIN EN 12615-1999
|
混凝土构件防护和维修产品和系统.试验方法.斜向剪切强度测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength; German version EN 12615:1999
|
| DIN EN 12617-1-2003
|
混凝土结构的保护和检修用产品和系统.试验方法.第1部分:聚合物和表面防护系统(SPS)线性收缩率的测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS); German version EN 12617-1:2003
|
| DIN EN 12617-2-2004
|
混凝土构件的保护和维修用产品和系统.试验方法.第2部分:基于高聚物粘合剂的裂缝注入产品的收缩率
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage; German version EN 12617-2:2004
|
| DIN EN 12617-3-2002
|
混凝土构件的保护和检修用产品和系统.试验方法.第3部分:结构粘合剂早期寿命线性收缩率的测定; 德文版本 EN
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents; German version EN 12617-3:2002
|
| DIN EN 12617-4-2002
|
混凝土构件的保护和检修用产品和系统.试验方法.第4部分:收缩率和膨胀率的测定; 德文版本 EN 12617-4:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion; German version EN 12617-4:2002
|
| DIN EN 12618-1-2003
|
混凝土结构的保护和检修用产品和系统.试验方法.第1部分:有限定延展性的灌浆制品的粘着性和伸长能力
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility; German version EN 12618-1:2003
|
| DIN EN 12618-2-2004
|
混凝土结构的保护和维修用产品和系统.试验方法.第2部分:带或不带热循环的注入产品的粘性测定.抗拉粘结强度
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength; German version EN 12618-2:2004
|
| DIN EN 12618-3-2004
|
混凝土结构的保护和维修用产品和系统.试验方法.第3部分:带或不带热循环的注入产品的粘性测定.倾斜剪切法
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method; German version EN 12618-3:2004
|
| DIN EN 12620-2003
|
混凝土集料
|
Aggregates for concrete; German version EN 12620:2002
|
| DIN EN 12629-1-2001
|
混凝土和硅酸盐建筑材料生产机械.安全性.第1部分:通用要求
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements; German version EN 12629-1:2000
|
| DIN EN 12629-2-2003
|
制造混凝土和硅酸钙建筑产品的设备.安全.第2部分:砌块制造机
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines; German version EN 12629-2:2002
|
| DIN EN 12629-3-2003
|
制造混凝土和硅酸钙建筑产品的设备.安全.第3部分:滑动和转盘机
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines; German version EN 12629-3:2002
|
| DIN EN 12629-4-2001
|
混凝土和硅酸钙盐构件生产机械.安全性.第4部分:屋顶瓦加工机
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4: Concrete roof tile making machines; German version EN 12629-4:2001
|
| DIN EN 12629-5-1-2004
|
生产混凝土和硅酸盐建筑产品用机器.安全.第5-1部分:垂直轴的管道制造机械
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis; German version EN 12629-5-1:2003
|
| DIN EN 12629-5-2-2004
|
生产混凝土和硅酸盐建筑产品用机器.安全.第5-2部分:水平轴的管道制造机械
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis; German version EN 12629-5-2:2003
|
| DIN EN 12629-5-3-2004
|
生产混凝土和硅酸盐建筑产品用机器.安全.第5-3部分:管道预加应力机械
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines; German version EN 12629-5-3:2003
|
| DIN EN 12629-5-4-2004
|
生产混凝土和硅酸盐建筑产品用机器.安全.第5-4部分:混凝土管道涂层机械
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines; German version EN 12629-5-4:2003
|
| DIN EN 12629-6-2005
|
生产混凝土和硅酸钙建筑产品用机器.安全.第6部分:生产预制加筋产品的固定和移动设备
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products; German version EN 12629-6:2004
|
| DIN EN 12629-7-2004
|
生产混凝土和硅酸盐建筑产品用机器.安全.第7部分:预应力产品的长线生产用固定和移动设备
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products; German version EN 12629-7:2004
|
| DIN EN 12629-8-2003
|
制造混凝土和硅酸盐建筑产品用生产设备.安全.第8部分:制造硅酸盐(和混凝土)建筑产品用机器和设备
|
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete); German version EN 12629-8:2002
|
| DIN EN 12636-1999
|
混凝土支撑结构防护和维修用产品和系统.试验方法.混凝土粘结性测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the adhesion conrete to concrete; German version EN 12636:1999
|
| DIN EN 12637-1-2004
|
混凝土结构的保护和维修用产品和系统.试验方法.注入产品的兼容性.第1部分:与混凝土的兼容性
|
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete; German version EN 12637-1:2004
|
| DIN EN 12637-3-2004
|
混凝土结构的保护和维修用产品和系统.试验方法.注入产品的可混用性.第3部分:注入产品对弹性体的影响
|
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers; German version EN 12637-3:2003
|
| DIN EN 12696-2000
|
混凝土中钢的阴极保护
|
Cathodic protection of steel in concrete; German version EN 12696:2000
|
| DIN EN 12737-2004
|
预制混凝土产品.家畜用地板横木
|
Precast concrete products - Floor slats for livestock; German version EN 12737:2004
|
| DIN EN 12794-2005
|
预浇铸混凝土产品.基桩
|
Precast concrete products - Foundation piles; German version EN 12794:2005
|
| DIN EN 12839-2001
|
混凝土预制件.栏栅元件
|
Precast concrete products - Elements for fences; German version EN 12839:2001
|
| DIN EN 12843-2004
|
预制混凝土产品.杆和柱
|
Precast concrete products - Masts and poles; German version EN 12843:2004
|
| DIN EN 13055-1-2002
|
轻集料.第1部分:混凝土、灰浆和水泥浆用轻集料; 德文版本 EN 13055-1:2002
|
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout; German version EN 13055-1:2002
|
| DIN EN 13057-2002
|
混凝土构件的保护和检修用产品和系统.试验方法.抗毛细管吸收性的测定; 德文版本 EN 13057:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption; German version EN 13057:2002
|
| DIN EN 13062-2003
|
混凝土结构保护和修补的产品和系统.试验方法.增强材料保护用产品的触变性测定
|
Products and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement; German version EN 13062:2003
|
| DIN EN 13084-2-2002
|
独立式工业烟囱.第2部分:混凝土烟囱
|
Free-standing chimneys - Part 2: Concrete chimneys; German version EN 13084-2:2001
|
| DIN EN 13108-1-2006
|
沥青混合物.材料规范.第1部分:沥青混凝土
|
Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete; German version EN 13108-1:2006
|
| DIN EN 13108-2-2006
|
沥青混合物.材料规范.第2部分:极薄层沥青混凝土
|
Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers; German version EN 13108-2:2006
|
| DIN EN 13198-2003
|
预制混凝土产品.道路公共设施和花园用品
|
Precast concrete products - Street furniture and garden products; German version EN 13198:2003
|
| DIN EN 13224 Berichtigung 1-2005
|
预制混凝土制品.有筋楼板元件
|
Precast concrete products - Ribbed floor elements; German version EN 13224:2004, Corrigendum to DIN EN 13224:2004-11
|
| DIN EN 13224-2004
|
预制混凝土产品.肋构楼面组件
|
Precast concrete products - Ribbed floor elements; German version EN 13224:2004
|
| DIN EN 13225-2004
|
预铸混凝土产品.线性结构元件
|
Precast concrete products - Linear structural elements; German version EN 13225:2004
|
| DIN EN 1323-1999
|
地砖胶粘剂.混凝土板(包括修改件A1:1998)
|
Adhesives for tiles - Concrete slab for test (includes Amendment A1:1998); German version EN 1323:1996 + A1:1998
|
| DIN EN 13230-1-2003
|
铁路设施.轨道.混凝土枕木和支撑架.第1部分:一般要求
|
Railway applications - Track; Concrete sleepers and bearers - Part 1: General requirements; German version EN 13230-1:2002
|
| DIN EN 13230-2-2003
|
铁路设施.轨道.混凝土枕木和支撑架.第2部分:预应力单块枕木
|
Railway applications - Track; Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers; German version EN 13230-2:2002
|
| DIN EN 13230-3-2003
|
铁路设施.轨道.混凝土枕木和支撑架.第3部分:加筋双块枕木
|
Railway applications - Track; Concrete sleepers and bearers - Part 3: Twinblock reinforced sleepers; German version EN 13230-3:2002
|
| DIN EN 13230-4-2003
|
铁路设施.轨道.混凝土枕木和支撑架.第4部分:道岔和交叉路预应力支撑架
|
Railway applications - Track; Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings; German version EN 13230-4:2002
|
| DIN EN 13230-5-2003
|
铁路设施.轨道.混凝土枕木和支撑架.第5部分:道岔和交叉路支撑架
|
Railway applications - Track; Concrete sleepers and bearers - Part 5: Special elements; German version EN 13230-5:2002
|
| DIN EN 13263-1-2005
|
混凝土用含硅烟雾.第1部分:定义、要求和合格标准
|
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria; German version EN 13263-1:2005
|
| DIN EN 13263-2-2005
|
混凝土用含硅烟雾.第2部分:合格评价
|
Silica fume for concrete - Part 2: Conformity evaluation; German version EN 13263-2:2005
|
| DIN EN 13294-2002
|
混凝土构件的保护和检修用产品和系统.试验方法.固化时间的测定; 德文版本 EN 13294:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time; German version EN 13294:2002
|
| DIN EN 13295-2004
|
混凝土结构的防护和维修用产品和系统.试验方法.抗碳化性测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation; German version EN 13295:2004
|
| DIN EN 13369-2004
|
预制混凝土产品的通用规则
|
Common rules for precast concrete products; German version EN 13369:2004
|
| DIN EN 13375-2004
|
防水柔性薄板.车辆通行用混凝土桥板和其他混凝土表面的防水.样品制备
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation; German version EN 13375:2004
|
| DIN EN 1338-2003
|
铺路混凝土砌块.要求和试验方法
|
Concrete paving blocks - Requirements and test methods; German version EN 1338:2003
|
| DIN EN 1339-2003
|
铺路混凝土板.要求和试验方法
|
Concrete paving flags - Requirements and test methods; German version EN 1339:2003
|
| DIN EN 13391-2004
|
后张法预应力混凝土的机械试验
|
Mechanical tests for post-tensioning systems; German version EN 13391:2004
|
| DIN EN 13395-1-2002
|
混凝土构件的保护和检修用产品和系统.试验方法.可加工性的测定.第1部分:触变性灰浆流量试验; 德文版本 EN 1
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 1: Test for flow of thixotropic mortars; German version EN 13395-1:2002
|
| DIN EN 13395-2-2002
|
混凝土构件的保护和检修用产品和系统.试验方法.可加工性的测定.第2部分:水泥浆或灰浆流量试验; 德文版本 EN
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 2: Test for flow of grout or mortar; German version EN 13395-2:2002
|
| DIN EN 13395-3-2002
|
混凝土构件的保护和检修用产品和系统.试验方法.可加工性的测定.第3部分:维修混凝土流量试验; 德文版本 EN 1
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 3: Test for flow of repair concrete; German version EN 13395-3:2002
|
| DIN EN 13395-4-2002
|
混凝土构件维修和保护用产品和系统.试验方法.可加工性测定.第4部分:备用泥浆的应用
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 4: Application of repair mortar overhead; German version EN 13395-4:2002
|
| DIN EN 13396-2004
|
混凝土结构的防护和修理用产品和系统.试验方法.氯离子浸入测量
|
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of chloride ion ingress; German version EN 13396:2004
|
| DIN EN 1340-2003
|
混凝土路边挡块.要求和试验方法
|
Concrete kerb units; Requirements and test methods; German version EN 1340:2003
|
| DIN EN 13481-2-2003
|
铁路设施.轨道.紧固系统的性能要求.第2部分:混凝土轨枕用紧固系统
|
Railway applications - Track; Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers; German version EN 13481-2:2002
|
| DIN EN 1351-1997
|
蒸气强化加气混凝土弯曲强度测定
|
Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997
|
| DIN EN 1352-1997
|
高压蒸气加气混凝土和堆放多孔轻质混凝土受压静态弹性模数测定
|
Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1352:1996
|
| DIN EN 13529-2003
|
混凝土结构的保护和修理用产品和系统.试验方法.耐强化学侵蚀
|
Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack; German version EN 13529:2003
|
| DIN EN 1353-1997
|
高压蒸气加气混凝土湿度测定
|
Determination of moisture content of autoclaved aerated concrete; German version EN 1353:1996
|
| DIN EN 1354-2005
|
测定透空式结构轻集料混凝土的抗压强度
|
Determination of compressive strength of lightweight aggregate concrete with open structure; German version EN 1354:2005
|
| DIN EN 1355-1997
|
高压蒸气加气混凝土和堆放多孔轻质混凝土压应力蠕变变形测定
|
Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1355:1996
|
| DIN EN 1356-1997
|
横向负载下高压蒸气加气混凝土或堆放多孔轻质混凝土预制加强部件承载性能测定
|
Performance test for prefabricated reinforced components under transversal load of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1356:1996
|
| DIN EN 13578-2004
|
混凝土结构的保护和维修用产品和系统.试验方法.湿混凝土的兼容性
|
Products and systems for the protection and repair of concrete structure - Test method - Compatibility on wet concrete; German version EN 13578:2003
|
| DIN EN 13579-2002
|
混凝土构件的保护和检修用产品和系统.试验方法.疏水性浸渍的烘干试验; 德文版本 EN 13579:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Drying test for hydrophobic impregnation; German version EN 13579:2002
|
| DIN EN 13580-2002
|
混凝土构件的保护和检修用产品和系统.试验方法.疏水性浸渍的吸水率和耐碱性试验; 德文版本 EN 13580:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Water absorption and resistance to alkali for hydrophobic impregnations; German version EN 13580:2002
|
| DIN EN 13581-2002
|
混凝土构件的保护和检修用产品和系统.试验方法.盐力解冻后疏水性浸渍混凝土质量损失的测定; 德文版本 EN 13
|
Products and systems for the protection and repair of concrete structures - Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress; German version EN 13581:2002
|
| DIN EN 13584-2003
|
混凝土结构的保护和检修用产品和系统.试验方法.检修产品压缩蠕变的测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products; German version EN 13584:2003
|
| DIN EN 13596-2005
|
防水用柔性薄板.混凝土船桥甲板和其他车辆行驶的混凝土表面的防水性.粘结强度的测定
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of bond strength; German version EN 13596:2004
|
| DIN EN 13653-2004
|
防水用柔性薄板.车辆通行用混凝土桥板和其他混凝土表面的防水.剪切强度的测定
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of shear strength; German version EN 13653:2004
|
| DIN EN 13687-1-2002
|
混凝土结构保护和维修用产品和设备.试验方法.热相容性测定.第1部分:防冻盐浸渍冻融循环
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion; German version DIN EN 13687-1:2002
|
| DIN EN 13687-2-2002
|
混凝土结构的保护和检修用产品和设备.试验方法.热相容性测定.第2部分:雷雨循环(热冲击)
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock); German version EN 13687-2:2002
|
| DIN EN 13687-3-2002
|
混凝土结构保护和检修用产品和设备.试验方法.热相容性测定.第3部分:无防冻盐冲击热循环
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact; German version EN 13687-3:2002
|
| DIN EN 13687-4-2002
|
混凝土结构防护和维修用产品和设备.试验方法.热适应性测定.第4部分:干热循环试验
|
Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 4: Dry thermal cycling; German Version EN 13687-4:2002
|
| DIN EN 13687-5-2002
|
混凝土结构的防护和维修用产品和设备.试验方法.热适应性测定.第5部分:耐温度冲击
|
Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 5: Resistance to temperature shock; German version EN 13687-5:2002
|
| DIN EN 13693-2004
|
预制混凝土产品.特殊屋顶组件
|
Precast concrete products - Special roof elements; German version EN 13693:2004
|
| DIN EN 13733-2002
|
混凝土构件的保护和检修用产品和系统.试验方法.结构粘结的耐用性测定; 德文版本 EN 13733:2002
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of the durability of structural bonding; German version EN 13733:2002
|
| DIN EN 13863-1-2004
|
混凝土路面.第1部分:用测量法测定混凝土路面厚度的试验方法
|
Concrete pavements - Part 1: Test method for the determination of the thickness of a concrete pavement by survey method; German version EN 13863-1:2003
|
| DIN EN 13863-2-2004
|
混凝土路面.第2部分:层间粘结性测定的试验方法
|
Concrete pavements - Part 2: Test method for the determination of the bond between two layers; German version EN 13863-2:2003
|
| DIN EN 13863-3-2005
|
混凝土路面.第3部分:从核心处测定混凝土路面厚度的试验方法
|
Concrete pavements - Part 3: Test methods for the determination of the thickness of a concrete pavement from cores; German version EN 13863-3:2004
|
| DIN EN 13863-4-2005
|
混凝土路面.第4部分:测定混凝土路面对防滑钉胎耐磨性的试验方法
|
Concrete pavements - Part 4: Test methods for the determination of wear resistance of concrete pavements to studded tyres; German version EN 13863-4:2004
|
| DIN EN 13877-1-2004
|
混凝土铺面.第1部分:材料
|
Concrete pavements - Part 1: Materials; German version EN 13877-1:2004
|
| DIN EN 13877-2-2004
|
混凝土铺面.第2部分:混凝土铺面的功能要求
|
Concrete pavements - Part 2: Functional requirements for concrete pavements; German version EN 13877-2:2004
|
| DIN EN 13877-3-2005
|
混凝土路面.第3部分:混凝土路面中使用的定位销的规范
|
Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements; German version EN 13877-3:2004
|
| DIN EN 13880-12-2003
|
热用密封胶.第12部分:粘结试验中混凝土试验块制造的试验方法(配方法)
|
Hot applied joint sealants - Part 12: Test method for the manufacture of concrete test blocks for bond testing (recipe methods); German version EN 13880-12:2003
|
| DIN EN 13894-1-2004
|
混凝土构件的保护和维修用产品和系统.试验方法.动态荷载下疲劳的测定.第1部分:养护期间
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 1: During cure; German version EN 13894-1:2003
|
| DIN EN 13894-2-2003
|
混凝土构件防护和维修产品和系统.试验方法.动态载荷疲劳测定.第2部分:硬化后
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of fatigue under dynamic loading - Part 2: After hardening; German version EN 13894-2:2002
|
| DIN EN 13978-1-2005
|
预制混凝土产品.预制混凝土汽车库.第1部分:房屋尺寸大小的整体式或单块组成的加筋车库的要求
|
Precast concrete products - Precast concrete garages - Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions; German version EN 13978-1:2005
|
| DIN EN 1402-4-2004
|
不定型耐火制品.第4部分:耐火混凝土一致性的测定
|
Unshaped refractory products - Part 4: Determination of consistency of castables; German version EN 1402-4:2003
|
| DIN EN 14068-2004
|
混凝土结构的防护和维修用产品和系统.试验方法.在混凝土中不移动的情况下注浆裂纹防水性的测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected cracks without movement in concrete; German version of EN 14068:2003
|
| DIN EN 14117-2004
|
混凝土结构的保护和维修用产品和系统.试验方法.粘性注入产品的流出时间测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products; German version EN 14117:2004
|
| DIN EN 14223-2006
|
防水用柔性薄板.混凝土船桥甲板和其他车辆可通过的混凝土表面的防水.吸水率的测定
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption; German version EN 14223:2005
|
| DIN EN 14224-2006
|
防水用柔性薄板.混凝土船桥甲板和其他车辆可通过的混凝土表面的防水.断裂桥接能力的测定.德文版本 EN 14224
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability; German version EN 14224:2005
|
| DIN EN 14406-2004
|
混凝土结构的保护和维修用产品和系统.试验方法.膨胀率和膨胀发展的测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution; German version EN 14406:2004
|
| DIN EN 14437-2005
|
屋顶用安装的粘土或混凝土瓦的耐隆起性的测定.屋顶系统试验方法
|
Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method; German version EN 14437:2004
|
| DIN EN 14474-2005
|
预制混凝土制品.木屑做集料的混凝土.要求和试验方法
|
Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods; German version EN 14474:2004
|
| DIN EN 14487-1-2006
|
喷射混凝土.第1部分:定义、规范和一致性.德文版本EN 14487-1-2005
|
Sprayed concrete - Part 1: Definitions, specifications and conformity; German version EN 14487-1:2005
|
| DIN EN 14488-1-2005
|
检测喷射混凝土.第1部分:新浇混凝土和硬化混凝土的取样
|
Testing sprayed concrete - Part 1: Sampling fresh and hardened concrete; German version EN 14488-1:2005
|
| DIN EN 14488-4-2005
|
检测喷射混凝土.第4部分:通过直接拉伸测定芯的粘结强度
|
Testing sprayed concrete - Part 4: Bond strength of cores by direct tension; German version EN 14488-4:2005
|
| DIN EN 14488-5-2006
|
喷射混凝土试验.第5部分:纤维钢筋混凝土板样本的能量吸收能力的测定
|
Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens; German version EN 14488-5:2006
|
| DIN EN 14488-7-2006
|
检测喷射混凝土.第7部分:纤维钢筋混凝土的纤维含量
|
Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete; German version EN 14488-7:2006 |
| DIN EN 14497-2004
|
混凝土结构的保护和维修用产品和系统.试验方法.过滤稳定性的测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability; German version EN 14497:2004
|
| DIN EN 14498-2004
|
混凝土结构的保护和维修用产品和系统.试验方法.空气干燥与储水循环后注入产品的体积和重量的变化
|
Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles; German version EN 14498:2004
|
| DIN EN 14649-2005
|
预制混凝土产品.水泥和混凝土中玻璃纤维残留强力的试验方法(SIC试验)
|
Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST); German version EN 14649:2005
|
| DIN EN 14650-2005
|
预浇铸混凝土产品.金属纤维混凝土工厂生产控制通用规则
|
Precast concrete products - General rules for factory production control of metallic fibered concrete; German version EN 14650:2005
|
| DIN EN 14651-2005
|
金属纤维混凝土试验方法.弯曲拉伸强度的测量(比例极限,剩余)
|
Test method for metallic fibered concrete - Measuring the flexural tensile stength (limit of proportionality (LOP), residual); German version EN 14651:2005
|
| DIN EN 14691-2005
|
防水用柔性薄板.车辆可通过的混凝土船桥甲板和其他混凝土表面的防水.通过热调节的兼容性
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Compatibility by heat conditioning; German version EN 14691:2005
|
| DIN EN 14692-2005
|
防水用柔性薄板.车辆可通过的混凝土船桥甲板和其他混凝土表面的防水.沥青层耐压实性测定
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer; German version EN 14692:2005
|
| DIN EN 14694-2005
|
防水用柔性薄板.车辆可通过的混凝土船桥甲板和其他混凝土表面的防水.预处理产生损坏后耐动态水压的测定
|
Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment; German version EN 14694:2005
|
| DIN EN 14721-2005
|
金属纤维混凝土的试验方法.新浇混凝土和淬硬混凝土纤维含量的测量
|
Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete; German version EN 14721:2005
|
| DIN EN 1504-1-2005
|
混凝土结构的保护和修理用产品和系统.定义、要求、质量控制和合格评价.第1部分:定义
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions; German version EN 1504-1:2005
|
| DIN EN 1504-10-2004
|
混凝土结构的保护和维修用产品和系统.定义、要求、质量控制和合格评价.第10部分:产品和系统的现场应用以及
|
Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works; German version EN 1504-10:2003
|
| DIN EN 1504-2-2005
|
混凝土结构物的保护和修理用产品和系统.定义、要求、质量控制和合格评价.第2部分:混凝土的表面防护系统
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004
|
| DIN EN 1504-3-2006
|
混凝土结构的保护和维修用产品和系统.定义、要求、质量控制和合格评价.第3部分:结构和非结构修理.德文版本E
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair; German version EN 1504-3:2005
|
| DIN EN 1504-4-2005
|
混凝土结构的保护和维修用产品和系统.定义、要求、质量控制和合格评价.第4部分:结构粘结
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding; German version EN 1504-4:2004
|
| DIN EN 1504-5-2005
|
混凝土结构的保护和维修用产品和系统.定义、要求、质量控制和合格评价.第5部分:混凝土灌注
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection; German version EN 1504-5:2004
|
| DIN EN 1504-8-2005
|
混凝土结构的保护和维修用产品和系统.定义、要求、质量控制和合格评价.第8部分:质量控制和合格评价
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity; German version EN 1504-8:2004
|
| DIN EN 1520-2003
|
透空结构的轻骨料混凝土预制增强构件（包括勘误AC-2003)
|
Prefabricated reinforced components of lightweight aggregate concrete with open structure (includes corrigendum AC:2003); German version EN 1520:2002 + AC:2003
|
| DIN EN 1521-1996
|
岩石多孔轻质混凝土抗弯强度测定
|
Determination of flexural strength of lightweight aggregate concrete with open structure; German version EN 1521:1996
|
| DIN EN 1542-1999
|
混凝土支承结构防护和维修用产品和系统.试验方法.通过撕裂试验测量粘附强度
|
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off; German version EN 1542:1999
|
| DIN EN 1543-1998
|
混凝土结构保护和修理用产品和系统.检验方法.聚合物抗拉强度延伸测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers; German version EN 1543:1998
|
| DIN EN 1737-1998
|
蒸气淬火气孔混凝土或孔隙轻型混凝土预制件钢筋混凝土垫或加固篮焊接结点断裂剪切力测定
|
Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1737:1998
|
| DIN EN 1738-1998
|
蒸气淬火气孔混凝土制非承重加强部件钢应力测定
|
Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete; German version EN 1738:1998
|
| DIN EN 1739-1998
|
结构件平面承载时蒸气淬火气孔混凝土预制件或堆放空隙轻型混凝土预制件之间缝隙抗剪应力测定
|
Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1739:1998
|
| DIN EN 1740-1998
|
主要是纵向负载作用下(垂直构件)蒸气淬火气孔混凝土制或堆放空隙轻型混凝土制预制加强件支承性能测定
|
Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components); German version EN 1740:1998
|
| DIN EN 1741-1998
|
负载垂直于结构件平面时蒸气淬火气孔混凝土制或堆放空隙轻型混凝土制预制件间缝隙抗剪应力测定
|
Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1741:1998
|
| DIN EN 1742-1998
|
蒸气淬火气孔混凝土制或堆放空隙轻型混凝土制多层构件层间抗剪应力测定
|
Determination of shear strength between different layers or multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1742:1998
|
| DIN EN 1766-2000
|
混凝土结构防护和修理用产品和系统.试验方法.试验参考混凝土.德文版本EN 1766-2000
|
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing; German version EN 1766:2000
|
| DIN EN 1767-1999
|
混凝土支承结构维修用产品和系统.试验方法.红外线分析
|
Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis; German version EN 1767:1999
|
| DIN EN 1770-1998
|
混凝土支撑结构防护和维修用产品和系统.试验方法.热膨胀系数测定
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion; German version EN 1770:1998
|
| DIN EN 1771 Berichtigung 1-2006
|
混凝土结构的保护和修复用产品和系统.试验方法.使用沙柱试验测定可注入性.对DIN EN 1771-2004的勘误
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability using the sand column test; German version EN 1771:2004, Corrigenda to DIN EN 1771:2004-11; German version EN 1771:2004/AC:2005
|
| DIN EN 1771-2004
|
混凝土结构的保护和修复用产品和系统.试验方法.使用沙柱试验测定可注入性
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability and splitting test; German version EN 1771:2004
|
| DIN EN 1799-1999
|
混凝土支承结构防护和维修用产品和系统.检验方法.混凝土表面用胶粘剂合格检验
|
Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface; German version EN 1799:1998
|
| DIN EN 1857 Berichtigung 1-2006
|
烟囱.部件.混凝土燃烧内衬.德文版本EN 1857-2003对DIN EN 1857-2003-11勘误
|
Chimneys - Components - Concrete flue liners; German version EN 1857:2003, Corrigenda to DIN EN 1857:2003-11; German version EN 1857:2003/AC:2005
|
| DIN EN 1857-2003
|
烟囱.元部件.混凝土烟道内衬
|
Chimneys - Components - Concrete flue liners; German version EN 1857:2003
|
| DIN EN 1858-2003
|
烟囱.元件.混凝土烟道砖
|
Chimneys - Components - Concrete flue blocks; German version EN 1858:2003
|
| DIN EN 1877-1-2000
|
混凝土结构保护和维修用产品和系统.试验方法.与环氧树脂相关的活性函数.第1部分:环氧基当量测定
|
Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent; German version EN 1877-1:2000
|
| DIN EN 1877-2-2000
|
混凝土结构保护和维修用产品和系统.试验方法.与环氧树脂相关的活性成分.第2部分:通过总碱值测定氨成分
|
Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number; German version EN 1877-2:2000
|
| DIN EN 1916-2003
|
未加筋、钢纤维和加筋混凝土管和配件
|
Concrete pipes and fittings, unreinforced, steel fibre and reinforced; German version EN 1916:2002
|
| DIN EN 1917-2003
|
未加筋和加钢筋混凝土人孔和检验室
|
Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced; German version EN 1917:2002
|
| DIN EN 1992-1-1-2005
|
欧洲法规2.混凝土结构设计.第1-1部分:一般规则和建筑规则
|
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings; German version EN 1992-1-1:2004
|
| DIN EN 1994-1-1-2006
|
欧洲法规4:复合钢和混凝土结构的设计.第1-1部分:建筑规则和通用规则
|
Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings; German version EN 1994-1-1:2004
|
| DIN EN 1994-2-2006
|
欧洲法规4:复合钢和混凝土结构的设计.第2部分:桥梁通用规则和规则
|
Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges; German version EN 1994-2:2005
|
| DIN EN 206-1-2001
|
混凝土.第1部分:规范、性能、生产和符合性
|
Concrete - Part 1: Specification, performance, production and conformity; German version EN 206-1:2000
|
| DIN EN 206-1/A1-2004
|
混凝土.第1部分:规范、性能、生产及合格性
|
Concrete - Part 1: Specification, performance, production and conformity; German version EN 206-1:2000/A1:2004
|
| DIN EN 206-1/A2-2005
|
混凝土.第1部分:规范、性能、生产及合格性
|
Concrete - Part 1: Specification, performance, production and conformity; German version EN 206-1:2000/A2:2005
|
| DIN EN 40-4-2006
|
灯柱.第4部分:钢筋混凝土和预应力混凝土灯柱的要求
|
Lighting columns - Part 4: Requirements for reinforced and prestressed concrete lighting columns; German version EN 40-4:2005
|
| DIN EN 40-9-1984
|
照明灯柱.增强的和预应力混凝土照明灯柱的特殊要求
|
Lighting columns; special requirements for reinforced and prestressed concrete lighting columns
|
| DIN EN 413-1-2004
|
圬工混凝土.第1部分:组成、规范和合格标准
|
Masonry cement - Part 1: Composition, specifications and conformity criteria; German version EN 413-1:2004
|
| DIN EN 450-1-2005
|
混凝土用飞灰.第1部分:定义、规范和合格标准
|
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria; German version EN 450-1:2005
|
| DIN EN 450-2-2005
|
混凝土用飞灰.第2部分:合格评定
|
Fly ash for concrete - Part 2: Conformity evaluation; German version EN 450-2:2005
|
| DIN EN 480-1-1998
|
混凝土、灰浆和压紧灰浆掺和物.试验方法.第10部分:水溶氯化物含量测定
|
Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing; German version EN 480-1:1997
|
| DIN EN 480-10-1997
|
混凝土、灰浆和压紧灰浆掺和物.试验方法.第10部分:水溶氯化物含量测定
|
Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content; German version EN 480-10:1996
|
| DIN EN 480-11-2005
|
混凝土、灰浆和灌浆混合料.试验方法.第11部分:固化混凝土中气隙特性的测定
|
Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete; German version EN 480-11:2005
|
| DIN EN 480-12-2005
|
混凝土、灰浆和灌浆混合料.试验方法.第12部分:混合料碱含量的测定
|
Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures; German version EN 480-12:2005
|
| DIN EN 480-13-2002
|
混凝土、灰浆和水泥浆混合料.检验方法.第13部分:检验灰浆混合料用基准石工灰浆; 德文版本 EN 480-13:2002
|
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures; German version EN 480-13:2002
|
| DIN EN 480-4-2006
|
混凝土、灰浆和灌浆用填加剂.试验方法.第4部分:混凝土的渗液测定
|
Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete; German version EN 480-4:2005
|
| DIN EN 480-5-2005
|
混凝土、灰浆和灌浆用混合料.试验方法.第5部分:毛细管吸水测定
|
Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption; German version EN 480-5:2005
|
| DIN EN 480-6-2005
|
混凝土、灰浆和灌浆用混合料.试验方法.第6部分:红外线分析
|
Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis; German version EN 480-6:2005
|
| DIN EN 480-8-1997
|
混凝土、灰浆和压紧灰浆掺和物.试验方法第8部分:普通干燥剂含量测定
|
Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content; German version EN 480-8:1996
|
| DIN EN 491-2005
|
屋顶层和墙壁覆面用混凝土屋面瓦及配件.试验方法
|
Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods; German version EN 491:2004
|
| DIN EN 492-2006
|
纤维混凝土石板及配件.产品规范和试验方法
|
Fibre-cement slates and fittings - Product specification and test methods; German version EN 492:2004 + A1:2005
|
| DIN EN 512-1994
|
纤维混凝土制品.承压管和连接件
|
Fibre-cement products - Pressure pipes and joints; German version EN 512:1994
|
| DIN EN 60745-2-12-2004
|
手持式电动工具.安全.第2-12部分:混凝土振捣器的特殊要求
|
Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators (IEC 60745-2-12:2003); German version EN 60745-2-12:2003
|
| DIN EN 634-1-1995
|
混凝土粘结木屑板.规范.第1部分:一般要求
|
Cement-bonded particleboards - Specifications - Part 1: General requirements; German version EN 634-1:1995
|
| DIN EN 634-2-1996
|
混凝土粘结碎料板.要求.第2部分:干燥、潮湿和室外环境中使用的混凝土粘结碎料板要求
|
Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and exterior conditions; German version EN 634-2:1996
|
| DIN EN 639-1994
|
包括管接头和配件的混凝土承压管通用要求
|
Common requirements for concrete pressure pipes, including joints and fittings; German version EN 639:1994
|
| DIN EN 640-1994
|
包括管连接件和配件的分段加固(无外皮)钢筋混凝土承压管和混凝土承压管
|
Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings; German version EN 640:1994
|
| DIN EN 641-1994
|
包括管连接件和配件带薄板套的钢筋混凝土承压管
|
Reinforced concrete pressure pipes, cylinder type, including joints and fittings; German version EN 641:1994
|
| DIN EN 642-1994
|
带和不带薄板套的预应力混凝土承压管:包括管连接件、配件以及管用预应力钢特殊要求
|
Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes; German version EN 642:1994
|
| DIN EN 678-1994
|
经热压处理的加气混凝土干密度测定
|
Determination of the dry density of autoclaved aerated concrete; German version EN 678:1993
|
| DIN EN 679-2005
|
高压蒸养加气混凝土抗压强度测定
|
Determination of the compressive strength of autoclaved aerated concrete; German version EN 679:2005
|
| DIN EN 680-2006
|
高压蒸养加气混凝土干燥收缩的测定.德文版本EN 680-2005
|
Determination of the drying shrinkage of autoclaved aerated concrete; German version EN 680:2005
|
| DIN EN 771-3-2005
|
圬工单位规范.第3部分:集料混凝土圬工单位(密实和轻质集料)
|
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates); German version EN 771-3:2003 + A1:2005
|
| DIN EN 771-4-2005
|
圬工单位规范.第4部分:高压蒸氧加气混凝土圬工单位
|
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units; German version EN 771-4:2003 + A1:2005
|
| DIN EN 772-10-1999
|
砖石试验方法.第10部分:气孔混凝土砖石和石灰砂石含湿量测定
|
Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units; German version EN 772-10:1999
|
| DIN EN 772-11-2004
|
砌块的试验方法.第11部分:集料混凝土、高压蒸养加气混凝土、人造石和天然石砌块因毛细作用的吸水率及粘土砌
|
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units (includes amendment A1:2004); German version EN 772-11:2000 + A1:2004
|
| DIN EN 772-14-2002
|
圬工品试验方法.第14部分:集料混凝土和人造石圬工品湿度变形测定
|
Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units; German version EN 772-14:2001
|
| DIN EN 772-15-2000
|
圬工品试验方法.第15部分:高压蒸汽加气混凝土圬工品水蒸汽渗透率测定
|
Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units; German version EN 772-15:2000
|
| DIN EN 772-6-2002
|
圬工品试验方法.第6部分:集料混凝土圬工品弯曲拉伸强度测定
|
Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units; German version EN 772-6:2001
|
| DIN EN 934-2-2002
|
混凝土、灰浆和灌浆添加剂.第2部分:混凝土添加剂.定义、要求、符合性、标记和标签
|
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures; Definitions, requirements, conformity, marking and labelling; German version EN 934-2:2001
|
| DIN EN 934-2/A1-2005
|
混凝土、灰浆和灌浆用添加剂.混凝土添加剂.第2部分:定义、要求、合格性、标记和标签
|
Admixtures for concrete, mortar and grout - Concrete admixtures - Part 2: Definitions, requirements, conformity, marking and labelling; German version EN 934-2:2001/A1:2004
|
| DIN EN 934-2/A2-2006
|
混凝土、砂浆和灌浆用添加剂.第2部分:混凝土添加剂.定义、要求、合格性、标记和标签.德文版本EN 934-2-2001
|
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling; German version EN 934-2:2001/A2:2005
|
| DIN EN 934-3 Berichtigung 1-2006
|
混凝土、灰浆和灌浆添加剂.第3部分:灰浆添加剂.定义、要求、一致性、标记和标签
|
Admixtures for concrete, mortar and grout - Part 3: Admixtures for mortar - Definitions, requirements, conformity, marking and labelling; German version EN 934-3:2004, Corrigenda to DIN EN 934-3:2004-03; German version EN 934-3:2003/AC:2005
|
| DIN EN 934-3-2004
|
混凝土、砂浆和灰浆用外加剂.第3部分:砂浆外加剂.定义、要求、一致性、标记和贴标签
|
Admixtures for concrete, mortar and grout - Part 3: Admixtures for mortar - Definitions, requirements, conformity, marking and labelling; German version EN 934-3:2003
|
| DIN EN 934-4-2002
|
混凝土、灰浆和灌浆添加剂.第4部分:预应力钢筋束灌浆添加剂.定义、要求、符合性、标记和标签
|
Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons; Definitions, requirements, conformity, marking and labelling; German version EN 934-4:2001
|
| DIN EN 934-4/A1-2005
|
混凝土、灰浆和灌浆用添加剂.预应力钢筋束用灌浆添加剂.第4部分:定义、要求、合格性、标记和标签
|
Admixtures for concrete, mortar and grout - Admixtures for grout for prestressing tendons - Part 4: Definitions, requirements, conformity, marking and labelling; German version EN 934-4:2001/A1:2004
|
| DIN EN 934-6-2006
|
混凝土、灰浆和灌浆添加剂.第6部分:抽样、合格控制和合格评定
|
Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity; German version EN 934-6:2001 + A1:2005
|
| DIN EN 989-1995
|
钢筋和热压充气混凝土胶合性能的"推出"试验法测定
|
Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the "Push Out" test; German version EN 989:1995
|
| DIN EN 990-2003
|
热压加气混凝土和多孔结构轻质集料混凝土钢筋防蚀试验方法
|
Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure; German version EN 990:2002
|
| DIN EN 991-1995
|
热压充气混凝土或多孔结构轻质集料混凝土预制钢筋构件尺寸测定
|
Determination of the dimensions of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 991:1995
|
| DIN EN 992-1995
|
多孔结构轻质集料混凝土干密度测定
|
Determination of the dry density of lightweight aggregate concrete with open structure; German version EN 992:1995
|
| DIN EN ISO 15630-1-2002
|
混凝土的钢筋和预应力用钢.试验方法.第1部分:加筋棒材、丝杆材和丝材 (ISO 15630-1:2002); 德文版本 EN ISO
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bar, wire rod and wire (ISO 15630-1:2002); German version EN ISO 15630-1:2002
|
| DIN EN ISO 15630-2-2002
|
混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接构件 (ISO 15630-2:2002); 德文版本 EN ISO 15630-2:2002
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2002); German version EN ISO 15630-2:2002
|
| DIN EN ISO 15630-3-2002
|
混凝土的钢筋和预应力用钢.试验方法.第3部分:预应力钢 (ISO 15630-3:2002); 德文版本 EN ISO 15630-3:2002
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steels (ISO 15630-3:2002); German version EN ISO 15630-3:2002
|
| DIN EN ISO 3766-2004
|
建筑工程制图.钢筋混凝土的简化画法
|
Construction drawings - Simplified representation of concrete reinforcement (ISO 3766:2003); German version EN ISO 3766:2003
|
| DIN EN ISO 7783-2-1999
|
涂料和清漆.外部砖石工程和混凝土用涂覆材料和涂覆系统.第2部分:水蒸气渗透率测定和分类
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability) (ISO 7783-2:1999); German version EN ISO 7783-2:1999
|
| DIN V 1201-2004
|
排水和污水用未加筋的、钢纤维的和加筋的混凝土管和配件.1型和2型.要求、试验方法和合格评定
|
Concrete pipes and fittings, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Requirements, test methods and evaluation of conformity
|
| DIN V 18026-2006
|
符合DIN EN 1504-2-2005的混凝土产品用表面保护系统
|
Surface protection systems for concrete products according to DIN EN 1504-2:2005-01
|
| DIN V 18151-100-2005
|
轻质混凝土空心砌块.第100部分:具有特殊性能的空心砌块
|
Lightweight concrete hollow blocks - Part 100: Hollow blocks with specific properties
|
| DIN V 18152-100-2005
|
轻质混凝土实心砖和砌块.第100部分:具有特殊性能的实心砖和砌块
|
Lightweight concrete solid bricks and blocks - Part 100: Solied bricks and blocks with specific properties
|
| DIN V 18153-100-2005
|
混凝土砌块(标准重量混凝土).第100部分:具有特殊性能的砌块
|
Concrete masonry units (Normal-weight concrete) - Part 100: Masonry units with specific properties
|
| DIN V 18197-2005
|
用水密封的混凝土接缝的密封
|
Sealing of joints in concrete with water stops
|
| DIN V 18800-5-2004
|
钢结构.第5部分:钢和混凝土的复合结构.设计和建造
|
Steel structures - Part 5: Composite structures of steel and concrete - Design and construction
|
| DIN V 18998/A1-2003
|
根据DIN EN 934系列标准评定混凝土添加剂腐蚀性.修改件A1
|
Assessment corrosion behaviour of admixtures the series DIN EN 934; Amendment A1
|
| DIN V 20000-100-2002
|
建筑物用建筑产品的应用.第100部分:符合DIN EN 934-2:2002-02的混凝土混合物
|
Application of building products in structures - Part 100: Concrete admixtures according DIN EN 934-2:2002-02
|
| DIN V 20000-403-2005
|
结构物中建筑产品的应用.第403部分:符合DIN EN 771-3-2005的集料混凝土砌块的应用规则
|
Application of building products in structures - Part 403: Rules for the application of aggregate concrete masonry units according to DIN EN 771-3:2005-05
|
| DIN V 20000-404-2006
|
建筑物内建筑产品的应用.第404:依照DIN EN 771-4-2005-05高压蒸养加气混凝土砌块的应用规则
|
Application of building products in structures - Part 404: Rules for the application of autoclaved aerated concrete masonry units according to DIN EN 771-4:2005-05
|
| DIN V 25459-1990
|
核电站用加筋和预应力混凝土外壳
|
Reinforced and prestressed concrete containment for nuclear power plants
|
| DIN V 4034-1-2004
|
排水和污水用未加筋的、钢纤维和加筋的预制混凝土人孔.1型和2型.第1部分:要求、试验方法和合格评定
|
Prefabricated concrete manholes, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Part 1: Requirements, test methods and evaluation of conformity
|
| DIN V 4165-100-2005
|
高压蒸养加气混凝土砌块.第100部分:具有特殊性能的高精度砌块和元件
|
Autoclaved aerated concrete masonry units - Part 100: High precision units and elements with specific properties
|
| DIN V ENV 1170-8-1996
|
玻璃纤维混凝土试验方法.第8部分:气侯循环试验
|
Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test; German version prENV 1170-8:1996
|
| DIN V ENV 13381-3-2003
|
测定结构构件耐火作用的试验方法.第3部分:混凝土构件应用的保护方法
|
Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members; German version ENV 13381-3:2002
|
| DIN V ENV 13381-5-2003
|
测定结构构件耐火作用的试验方法.第5部分:混凝土/压型钢板组合构件应用的保护方法
|
Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite members; German version ENV 13381-5:2002
|
| DIN V ENV 13381-6-2003
|
测定结构件耐火作用的试验方法.第6部分:混凝土填充空心钢柱的应用保护方法
|
Test methods for determining the contribution to fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns; German version ENV 13381-6:2002
|
| DIN V ENV 1504-9-2001
|
混凝土结构的保护和修复用产品和系统.定义、要求、质量管理和一致性评价.第1部分:产品和系统使用的一般原理
|
Products and systems for the protection and repair of concrete structures - Definitons, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems; German version ENV 1504-9:1997
|
| DIN V ENV 1992-2-1997
|
欧洲法规2.钢筋混凝土及预应力混凝土支撑结构的设计.第2部分:混凝土桥
|
Eurocode 2: Design of concrete structures - Part 2: Concrete bridges; German version ENV 1992-2:1996
|
| DIN-Fachbericht 92-2000
|
国家应用文献(NAD).DIN V ENV 1992-1-2-1997的应用准则.欧洲法规2:钢筋混凝土支撑结构的计划.第1-2部分:通
|
()
|
| DIN-Fachbericht 94-2000
|
国家应用文献(NAD).DIN V ENV 1994-1-2-1997的应用准则.欧洲法规4:钢、混凝土组合支撑结构的测量和建造.第1
|
()
|
| 编号 | 中文名称 | 英文名称 |
|---|