编号 | 中文名称 | 英文名称 |
ISO 10144-1991
|
钢筋混凝土用钢筋和线材的认证方案
|
Certification scheme for steel bars and wires for the reinforcement of concrete structures
|
ISO 10544-1992
|
钢筋混凝土和制造焊接网用冷轧钢丝
|
Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric
|
ISO 11082-1992
|
钢筋混凝土结构用焊接网认证方案
|
Certification scheme for welded fabric for the reinforcement of concrete structures
|
ISO 14654-1999
|
钢筋混凝土用环氧树脂涂层钢
|
Epoxy-coated steel for the reinforcement of concrete
|
ISO 14655-1999
|
预应力混凝土用环氧树脂涂层钢绞线
|
Epoxy-coated strand for the prestressing of concrete
|
ISO 14656-1999
|
钢筋混凝土用环氧树脂涂层钢的环氧树脂粉末和密封材料
|
Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
|
ISO 14657-2005
|
混凝土钢筋用镀锌钢
|
Zinc-coated steel for the reinforcement of concrete
|
ISO 15630-1-2002
|
混凝土的钢筋和预应力用钢.试验方法.第1部分:加筋棒、钢丝杆和钢丝
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire
|
ISO 15630-2-2002
|
混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接纤维
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric
|
ISO 15630-3-2002
|
混凝土的钢筋和预应力用钢.试验方法.第3部分:预应力钢
|
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel
|
ISO 15673-2005
|
建筑物结构加筋混凝土的简易设计指南
|
Guidelines for the simplified design of structural reinforced concrete for buildings
|
ISO 16020-2005
|
混凝土加筋和预应力用钢.词汇
|
Steel for the reinforcement and prestressing of concrete - Vocabulary
|
ISO 18650-1-2004
|
建筑施工机械和设备.混凝土搅拌机.第1部分:词汇和一般规范
|
Building construction machinery and equipment - Concrete mixers - Part 1: Vocabulary and general specifications
|
ISO 18650-2-2006
|
建筑施工机械和设备.混凝土搅拌机.第2部分:搅拌功效检查程序
|
Building construction machinery and equipment - Concrete mixers - Part 2: Procedure for examination of mixing efficiency |
ISO 18652-2005
|
房屋建筑机械和设备.混凝土用外部振捣器
|
Building construction machinery and equipment - External vibrators for concrete
|
ISO 1920-1-2004
|
混凝土试验.第1部分:新浇混凝土的取样
|
Testing of concrete - Part 1: Sampling of fresh concrete
|
ISO 1920-2-2005
|
混凝土试验.第2部分:新浇混凝土特性
|
Testing of concrete - Part 2: Properties of fresh concrete
|
ISO 1920-3-2004
|
混凝土试验.第3部分:试验样品的制备和养护
|
Testing of concrete - Part 3: Making and curing test specimens
|
ISO 1920-4-2005
|
混凝土试验.第4部分:硬化混凝土的强度
|
Testing of concrete - Part 4: Strength of hardened concrete
|
ISO 1920-5-2004
|
混凝土试验.第5部分:硬化混凝土的特性(强度除外)
|
Testing of concrete - Part 5: Properties of hardened concrete other than strength
|
ISO 1920-6-2004
|
混凝土试验.第6部分:混凝土芯的取样、制备和试验
|
Testing of concrete - Part 6: Sampling, preparing and testing of concrete cores
|
ISO 1920-7-2004
|
混凝土试验.第7部分:硬化混凝土的无损试验
|
Testing of concrete - Part 7: Non-destructive tests on hardened concrete
|
ISO 19338 Technical Corrigendum 1-2004
|
结构混凝土设计标准的功效和评定要求.技术勘误1
|
Performance and assessment requirements for design standards on structural concrete; Technical Corrigendum 1
|
ISO 19338-2003
|
结构混凝土设计标准的功效和评定要求
|
Performance and assessment requirements for design standards on structural concrete
|
ISO 21573-1-2006
|
建筑施工机械和设备.混凝土泵.第1部分:技术和工业规范
|
Building construction machinery and equipment - Concrete pumps - Part 1: Terminology and commercial specifications
|
ISO 21592-2006
|
建筑物建造机械和设备.混凝土喷雾器.技术和工业规范
|
Building construction machinery and equipment - Concrete spraying machines - Terminology and commercial specifications
|
ISO 3766-2003
|
建筑工程制图.混凝土加筋的简化画法
|
Construction drawings - Simplified representation of concrete reinforcement
|
ISO 3893-1977
|
混凝土 按抗压强度的分级
|
Concrete; Classification by compressive strength
|
ISO 4103-1979
|
混凝土 按稠度的分级
|
Concrete; Classification of consistency
|
ISO 4635-1982
|
硫化橡胶 混凝土公路伸缩缝用预成型压缩密封件 材料规范
|
Rubber, vulcanized; Preformed compression seals for use between concrete motorway paving sections; Specification for material
|
ISO 6274-1982
|
混凝土 集料的筛分析
|
Concrete; Sieve analysis of aggregates
|
ISO 6782-1982
|
混凝土集料 堆积密度的测定
|
Aggregates for concrete; Determination of bulk density
|
ISO 6783-1982
|
混凝土的粗集料 颗粒密度和吸水率测定 液体天平法
|
Coarse aggregates for concrete; Determination of particle density and water absorption; Hydrostatic balance method
|
ISO 6784-1982
|
混凝土 受压静力弹性模量测定
|
Concrete; Determination of static modulus of elasticity in compression
|
ISO 6934-1-1991
|
预应力混凝土用钢 第1部分:一般要求
|
Steel for the prestressing of concrete; part 1: general requirements
|
ISO 6934-2-1991
|
预应力混凝土用钢 第2部分:冷拔钢丝
|
Steel for the prestressing of concrete; part 2: cold-drawn wire
|
ISO 6934-3-1991
|
预应力混凝土用钢 第3部分:淬火回火钢丝
|
Steel for the prestressing of concrete; part 3: quenched and tempered wire
|
ISO 6934-4 Technical Corrigendum 1-1992
|
预应力混凝土用钢 第4部分:钢绞线 技术勘误1
|
Steel for the prestressing of concrete - Part 4: Strand - Technical corrigendum 1
|
ISO 6934-4 Technical Corrigendum 2-2000
|
预应力混凝土用钢 第4部分:钢绞线 技术勘误2
|
Steel for the prestressing of concrete - Part 4: Strand; Technical corrigendum 2
|
ISO 6934-4-1991
|
预应力混凝土用钢 第4部分:钢绞线
|
Steel for the prestressing of concrete; part 4: strand
|
ISO 6934-5-1991
|
预应力混凝土用钢 第5部分:需连续处理或无需处理热轧钢筋
|
Steel for the prestressing of concrete; part 5: hot-rolled steel bars with or without subsequent processing
|
ISO 6935-1-1991
|
钢筋混凝土用钢 第1部分:光面钢筋
|
Steel for the reinforcement of concrete; part 1: plain bars
|
ISO 6935-2-1991
|
钢筋混凝土用钢 第2部分:带肋钢筋
|
Steel for the reinforcement of concrete; part 2: ribbed bars
|
ISO 6935-3 Technical Corrigendum 1-2000
|
钢筋混凝土用钢 第3部分:焊接钢筋网 技术勘误1
|
Steel for the reinforcement of concrete - Part 3: Welded fabric; Technical Corrigendum 1
|
ISO 6935-3-1992
|
钢筋混凝土用钢 第3部分:焊接钢筋网
|
Steel for the reinforcement of concrete; part 3: welded fabric
|
ISO 7033-1987
|
混凝土的细集料和粗集料 表观密度和吸水率的测定 比重瓶法
|
Fine and coarse aggregates for concrete; Determination of the particle mass-per-volume and water absorption; Pycnometer method
|
ISO 7728-1985
|
一块预制普通混凝土外墙构件和一块混凝土楼板之间的典型水平接缝 性能、特征和分类准则
|
Typical horizontal joints between an external wall of prefabricated ordinary concrete components and a concrete floor; Properties. characteristics and classification criteria
|
ISO 7729-1985
|
两块预制普通混凝土外墙构件之间的典型垂直接缝 性能、特征和分类准则
|
Typical vertical joints between two prefabricated ordinary concrete external wall components; Properties, characteristics and classification criteria
|
ISO 7783-2-1999
|
色漆和清漆 外部砖石工程和混凝土用涂覆材料和涂覆体系 第2部分:水蒸气渗透率的测定和分类
|
Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 2: Determination and classification of water-vapour transmission rate (permeability)
|
ISO 7844-1985
|
钢筋混凝土大板间,有连接筋并用混凝土浇灌的键槽式垂直接缝 实验室力学试验 切向荷载的影响
|
Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete panels; Laboratory mechanical tests; Effect of tangential loading
|
ISO 7845-1985
|
承重墙和混凝土楼板之间的水平接缝 实验室力学试验 由楼板传来的垂直荷载和弯矩的影响
|
Horizontal joints between load-bearing walls and concrete floors; Laboratory mechanical tests; Effect of vertical loading and of moments transmitted by the floors
|
ISO 9882-1993
|
建筑物的性能标准 预制混凝土楼板的性能试验在非集中荷载下的工况
|
Performance standards in building; performance test for precast concrete floors; behaviour under non-concentrated load
|
ISO 9883-1993
|
建筑物的性能标准 预制混凝土楼板的性能试验 在集中荷载下的工况
|
Performance standards in building; performance test for precast concrete floors; behaviour under concentrated load
|
编号 | 中文名称 | 英文名称 |