编号 |
中文名称 |
英文名称 |
BS 5863-1-1984
|
过程控制系统模拟信号.第1部分:直流信号规范
|
Analogue signals for process control systems - Specification for direct current signals
|
BS 5863-2-1980
|
过程控制系统模拟信号.第2部分:直流电压信号规范
|
Analogue signals for process control systems - Specification for direct voltage signals
|
BS 6739-2009
|
过程控制系统仪表的实施规范:安装设计和实施
|
Code of practice forinstrumentation in processcontrol systems: installationdesign and practice
|
BS 6912-20-1996
|
运土机械安全性.操作者控制系统
|
Safety of earth-moving machinery - Specification for operator's controls
|
BS 7346-4-2003
|
烟和热控制系统部件.利用稳态设计点火法的排烟和排热通风系统用功能推荐方法和计算方法.实施规程
|
Components for smoke and heat control systems - Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires - Code of practice
|
BS 7346-5-2005
|
烟和热控制系统部件.利用时间相关设计点火法的排烟和排热通风系统的功能推荐方法和计算方法.实施规程
|
Components for smoke and heat control systems - Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing time-dependent design fires - Code of practice
|
BS 7346-7-2006
|
烟和热控制系统部件.有顶棚停车场烟和热控制系统的功能建议和计算方法的实施规程
|
Components for smoke and heat control systems - Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks
|
BS 7623-1993
|
工业处理控制系统用电气和气动模拟图表记录器.检验和常规试验指南
|
Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Guidance for inspection and routine testing
|
BS 7986-2005
|
工业测量和控制系统用数据质量度量标准.规范
|
Data quality metrics for industrial measurement and control systems - Specification
|
BS 8491-2008
|
用于烟和热控制系统及特定的其它仍在继续的火灾安全系统部件的大直径电力电缆着火完整性的评估方法
|
Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems
|
BS DD CEN/TS 13149-3-2007
|
公共运输.道路车辆行程安排和控制系统.第3部分:WorldFIP文电内容
|
Public transport -Road vehicle scheduling and control systems - Part 3: WorldFIP message content
|
BS DD CEN/TS 13149-6-2005
|
公共运输.道路车辆调度和控制系统.CAN文电内容
|
Public transport — Road vehicle scheduling and control systems — Part 6: CAN message content
|
BS EN 12101-1-2005+A1-2006
|
烟热控制系统.挡烟板规范
|
Smoke and heat control systems - Specification for smoke barriers
|
BS EN 12101-10-2005
|
烟和热控制系统.电源
|
Smoke and heat control systems - Power supplies
|
BS EN 12101-2-2003
|
烟和热控制系统.烟和热的自然排放通风机规范
|
Smoke and heat control systems - Specification for natural smoke and heat exhaust ventilators
|
BS EN 12101-3-2002
|
烟和热控制系统.烟和热的动力排放通风机规范
|
Smoke and heat control systems - Specification for powered smoke and heat exhaust ventilators
|
BS EN 12101-6-2005
|
烟和热控制系统.压差系统规范.工具箱
|
Smoke and heat control systems - Specification for pressure differential systems - Kits
|
BS EN 13149-1-2004
|
公共交通.道路车辆调度和控制系统.车载数据传输的WORLDFIP定义和应用规则
|
Public transport - Road vehicle scheduling and control systems - WORLDFIP definition and application rules for onboard-data transmission
|
BS EN 13149-4-2004
|
公共运输.道路车辆调度和控制系统.CANopen运输车的一般应用规则
|
Public transport - Road vehicle scheduling and control systems - General application rules for CANopen transmission buses
|
BS EN 13149-5-2004
|
公共运输.道路车辆调度和控制系统.CANopen电缆敷设规范
|
Public transport - Road vehicle scheduling and control systems - CANopen cabling specifications
|
BS EN 13501-4-2007+A1-2009
|
建筑产品和建筑构件的火灾分类.根据烟控制系统构件的耐火性试验数据进行分类
|
Fire classification of construction products and building elements - Classification using data from fire resistance tests on components of smoke control systems
|
BS EN 14097-2002
|
航天产品保证.不合格控制系统
|
Space product assurance - Nonconformance control system
|
BS EN 1804-3-2006
|
地矿机械.液压矿顶支撑物的安全要求.液压控制系统
|
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Hydraulic control systems
|
BS EN 230-2005
|
燃油器用自动燃烧器控制系统
|
Automatic burner control systems for oil burners
|
BS EN 298-2003
|
带或不带风机的燃气炉及燃气装置用自动燃气炉控制系统
|
Automatic gas burner control systems for gas burners and gas burning appliances with or without fans
|
BS EN 30-1-4-2002
|
家庭烹调用燃气灶具.安全性.带有自动燃烧控制系统的一个或多个燃烧器的用具
|
Domestic cooking appliances burning gas - Safety - Appliances having one or more burners with an automatic burner control system
|
BS EN 50094-1993
|
MAC/包族的存取控制系统.EUROCRYPT
|
Access control system for the MAC/packet family: EUROCRYPT
|
BS EN 50133-1-1997
|
警报系统.安全用通路控制系统.系统要求
|
Alarm systems - Access control systems for use in security applications - System requirements
|
BS EN 50133-2-1-2000
|
报警系统.安全用通路控制系统.元件一般要求
|
Alarm systems - Access control systems for use in security applications - General requirements for components
|
BS EN 50133-7-1999
|
报警系统.安全用访问控制系统.应用导则
|
Alarm systems - Access control systems for use in security applications - Application guidelines
|
BS EN 50350-2004
|
蓄热式家用房间电供暖用充电控制系统.性能测量方法
|
Charging control systems for household electric room heating of the storage type - Methods for measuring performance
|
BS EN 60308-2005
|
水轮机.控制系统的试验
|
Hydraulic turbines - Testing of control systems
|
BS EN 60382-1993
|
过程控制系统用模拟气动信号
|
Analogue pneumatic signal for process control systems
|
BS EN 60546-1-1989
|
工业过程控制系统用模拟信号控制器.第1部分:性能评定方法
|
Controllers with analogue signals for use in industrial-process control systems - Controllers with analogue signals for use in industrial-process control systems - Methods for evaluating performance
|
BS EN 60546-2-1989
|
工业过程控制系统用模似信号控制器.第2部分:检验和常规试验指南
|
Controllers with analogue signals for use in industrial-process control systems - Guidance for inspection and routine testing
|
BS EN 60730-2-5-2002
|
家用和类似用途的自动电气控制装置.自动电器燃烧器控制系统的特殊要求
|
Automatic electrical controls for household and similar use - Particular requirements for automatic electrical burner control systems
|
BS EN 60770-1-1999
|
工业处理控制系统用发射机.性能评定方法
|
Transmitters for use in industrial-process control systems - Methods for performance evaluation
|
BS EN 60770-2-2003
|
工业过程控制系统用传感器.检验方法和常规试验
|
Transmitters for use in industrial-process control systems - Methods for inspection and routine testing
|
BS EN 60770-3-2006
|
工业过程控制系统用发射机.智能发射机的性能评估方法
|
Transmitters for use in industrial-process control systems - Methods for performance evaluation of intelligent transmitters
|
BS EN 60873-1-2004
|
工业过程控制系统用电动和气动模似图表记录仪.性能评定方法
|
Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Methods for performance evaluation
|
BS EN 60873-2-2004
|
工业过程控制系统用电动和气动模似图表记录仪.检查和常规试验指南
|
Electrical and pneumatic analogue chart recorders for use in industrial process control systems - Guidance for inspection and routine testing
|
BS EN 60880-2009
|
核电站.对安全重要的仪器和控制系统.形成A类功能的基于计算机系统的软件问题
|
Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions
|
BS EN 61003-1-2004
|
工业过程控制系统.具有模似输入和两个或多个输出状态的仪表.性能评定方法
|
Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Methods of evaluating performance
|
BS EN 61064-1993
|
汽轮机速度控制系统验收试验指南
|
Guide to acceptance tests for steam turbine speed control systems
|
BS EN 61158-2-2004
|
测量和控制用数字数据通信.工业控制系统用现场总线.物理层规范和服务定义
|
Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Physical layer specification and service definition
|
BS EN 61297-1996
|
工业过程控制系统.鉴定用自适应控制器分类
|
Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation
|
BS EN 61362-1998
|
液压涡轮控制系统规范指南
|
Guide to specification of hydroturbine control systems
|
BS EN 61377-1-2006
|
铁路设施.机车车辆.反向供电交流电动机及其控制系统的联合测试
|
Railway applications - Rolling stock - Combined testing of inverter-fed alternating current motors and their control system
|
BS EN 61377-3-2003
|
铁路设施.铁路车辆.由间接变流器馈电的交流电动机及其控制系统的联合检验
|
Railway applications - Rolling stock - Combined testing of alternating current motors, fed by an indirect convertor, and their control system
|
BS EN 61514-2-2004
|
工业过程控制系统.气动输出智能阀门定位器性能评价的方法
|
Industrial process control systems - Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
|
BS EN 61514-2002
|
工业过程控制系统.气动输出阀门定位器性能评价的方法
|
Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
|
BS EN 62061-2005
|
机械安全.与安全有关的电气、电子和可编程序电子控制系统的功能安全
|
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
|
BS EN 62065-2002
|
船舶导航和无线电通信设备和系统.跟踪控制系统.测试方法和要求的试验结果操作和性能要求
|
Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results
|
BS EN 62264-1-2008
|
企业控制系统集成.模型和术语
|
Enterprise-control system integration -Part 1: Models and terminology
|
BS EN 62264-2-2008
|
企业控制系统集成.对象模型属性
|
Enterprise-control system integration -Part 2: Object model attributes
|
BS EN 62264-3-2007
|
企业控制系统集成.制造过程管理的活动模型
|
Enterprise-controlsystem integration —Part 3: Activity models ofmanufacturing operations management
|
BS EN 62290-1-2006
|
铁路设施.城市有轨运输管理和命令/控制系统.第1部分:系统原则和基本原理
|
Railway applications - Urban guided transport management andcommand/control systems - Part 1: System principles andfundamental concepts
|
BS EN 62337-2007
|
加工工业中电子设备、测量仪表和控制系统的交付使用.具体阶段和里程碑
|
Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones
|
BS EN ISO 11674-2001
|
船舶与海上技术.航向控制系统
|
Ships and marine technology - Heading control systems
|
BS EN ISO 13628-6-2006
|
石油和天然气工业.水下采油系统的设计和操作.水下生产控制系统
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea production control systems
|
BS EN ISO 13849-2-2008
|
机械安全.控制系统的安全相关部件.确认
|
Safety of machinery - Safety-related parts of control systems - Validation
|
BS EN ISO 15005-2002
|
道路车辆.运输信息和控制系统的人类工效学特性.对话管理原则和一致性程序
|
Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures
|
BS EN ISO 15006-2004
|
道路车辆.交通信息和控制系统的人类工程学方面.车内声音信号表示规范和声顺性规程
|
Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle auditory presentation
|
BS EN ISO 15007-1-2002
|
道路车辆.与运输信息和控制系统有关的司机目视行为的测量.定义和参数
|
Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Definitions and parameters
|
BS EN ISO 16201-2006
|
残疾人用技术助力器.日用环境控制系统
|
Technical aids for disabled persons - Environmental control systems for daily living
|
BS EN ISO 16484-2-2004
|
建筑物自动化和控制系统.硬件
|
Building automation and control systems (BACS) - Hardware
|
BS EN ISO 16484-3-2005
|
建筑物自动化和控制系统.功能
|
Building automation and control systems (BACS) - Functions
|
BS EN ISO 16484-5-2008
|
建筑自动化和控制系统.数据通信协议
|
Building automation and control systems - Data communication protocol
|
BS EN ISO 17287-2003
|
道路车辆.运输信息和控制系统的工效学.驾驶时适用性的评定规程
|
Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving
|
BS EN ISO 18153-2003
|
体外诊疗装置.生物样品的定量测量.校准仪和控制系统指定酶的催化浓度的测量溯源性
|
In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
|
BS IEC 60671-2007
|
核电站.对安全性重要的仪器装置和控制系统.监督测试
|
Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing
|
BS IEC 60709-2004
|
核电站.重要的安全仪器和控制系统.隔离
|
Nuclear power plants - Instrumentation and control systems important to safety - Separation
|
BS IEC 61225-2006
|
核电厂.安全重要仪表和控制系统.供电要求
|
Nuclear power plants - Instrumentation and control systems important to safety - Requirements for electrical supplies
|
BS IEC 61500-2009
|
核电站.对安全重要的仪器和控制系统.系统执行A类功能的数据通信
|
Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions
|
BS IEC 61504-2000
|
核电站.对安全致关重要的测试设备和控制系统.对整个工厂范围的辐射监测
|
Nuclear power plants - Instrumentation and control systems important to safety - Plant-wide radiation monitoring
|
BS IEC 62264-2-2005
|
企业控制系统一体化.对象模型属性
|
Enterprise-control system integration - Object model attributes
|
BS IEC 62342-2007
|
核电站.对安全性重要的仪器装置和控制系统.老化管理
|
Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing
|
BS IEC 62397-2007
|
核电站.对安全性重要的仪器装置和控制系统.电阻温度探测器
|
Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
|
BS ISO 12576-2-2008
|
绝热产品.一致性控制系统.现场制品
|
Thermal insulation products - Conformity control systems - In-situ products
|
BS ISO 13628-8-2002
|
石油和天然气工业.海底采油系统的设计和操作.海底开采控制系统的遥控运送装置的接口
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Remotely operated vehicle (ROV) interfaces on subsea production systems
|
BS ISO 14827-1-2006
|
运输信息和控制系统.运输信息和控制系统中心区数据接口.消息定义要求
|
Transport information and control systems - Data interfaces between centres for transport information and control systems - Message definition requirements
|
BS ISO 14827-2-2005
|
交通信息和控制系统.交通信息中心和控制系统间数据接口.DATEX-ASN
|
Transport information and control systems - Data interfaces between centres for transport information and control systems - DATEX-ASN
|
BS ISO 15078-1998
|
林业用机械.原木装载机.驾驶员双杆控制系统的操作位置和方法
|
Machinery for forestry - Log loaders - Location and method of operation of two-lever operator controls
|
BS ISO 16329-2003
|
船舶和海上技术.高速船舶的航向控制系统
|
Ships and marine technology - Heading control systems for high-speed craft
|
BS ISO 16673-2007
|
道路车辆.运输信息和控制系统的人类工效学方面.阻塞法评定使用车内系统产生的视觉需求
|
Road vehicles - Ergonomic aspects of transport information and control systems - Occlusion method to assess visual demand due to the use of in-vehicle systems
|
BS ISO 17386-2005
|
交通信息和控制系统.低速操作用机动辅助装置.性能要求和试验规程
|
Transport information and control systems - Manoeuvring aids for low speed operation (MALSO) - Performance requirements and test procedures
|
BS ISO 17687-2007
|
运输信息和控制系统(TICS).综合运输队管理和商业货运业务.危险材料/危险品运输电子识别和监控用数据字典和
|
Transport information and control systems (TICS) - General fleet management and commercial freight operations - Data dictionary and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation
|
BS ISO 21927-1-2008
|
烟和热控制系统.挡烟隔板规范
|
Smoke and heat control systems - Specification for smoke barriers
|
BS ISO 7176-14-2008
|
轮椅.电动轮椅和小型摩托车的动力和控制系统.要求和试验方法
|
Wheelchairs - Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods
|
BS PAS 74-2008
|
因特网安全.儿童在线保护用访问控制系统.规范
|
Internet safety - Access control systems for the protection of children online - Specification
|
FD E09-027-1999
|
机械安全性.控制系统与安全相关的零部件.第100部分:EN 954-1-1996的应用指南
|
Safety of machinery - Safety-related parts of control systems - Part 100 : guide on the use and application of EN 954-1:1996.
|
编号 |
中文名称 |
英文名称 |