| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 15573-2-1993 | 播音室录音和放音的磁带输送装置.磁带输送装置、电影电视传送装置、放影机、视频接口或其它控制系统同步操 | Studio magnetic film transport for sound recording and sound reproduction; biphase square wave signal for synchronous operation of magnetic film transport and telecines, projectors, video-interfaces or other control systems |
| DIN 18232-1-2002 | 烟雾和热控制系统.第1部分:术语、安全目标 | Smoke and heat control systems - Part 1: Terms, safety objectives |
| DIN 18232-2-2007 | 烟雾和热控制系统.第2部分:自然烟雾和排热通风机.设计、要求和安装 | Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators; design, requirements and installation |
| DIN 18232-4-2003 | 烟和热控制系统.第4部分:排热系统(WA).试验方法 | Smoke and heat control systems - Part 4: Heat exhaust systems (WA); Test methods |
| DIN 18232-7-2008 | 烟和热控制系统.第7部分:可熔金属制备的排热通风设备.评估程序和安装 | Smoke and heat control systems - Part 7: Heat exhaust ventilators made of meltable materials; Assessment procedure and installation |
| DIN 43861-1-1979 | 安装于照明灯柱的脉动控制系统接收机.第1部分:主要尺寸 | Ripple control system, receiver to be mounted in lighting columns; main dimensions |
| DIN 43861-3-2000 | 脉动控制接收器.第三部分:脉动控制系统的传输协议 | Ripple control receiver - Part 3: Transmission protocols for ripple control systems |
| DIN 43861-302-2000 | 脉动控制接收器.第302部分:B型脉动控制系统传输协议 | Ripple control receiver - Part 302: Transmission protocols for ripple control systems type B |
| DIN 44836-1985 | 对核电站中对安全具有重要作用的测量控制系统的试验 | Tests on instrumentation and control systems important to safety in nuclear power stations |
| DIN 56930-2-2000 | 舞台照明控制系统.第2部分:控制信号 | Stage lighting control systems - Part 2: Control signals |
| DIN 56930-3-2010 | 娱乐科技.照明控制系统.第3部分:以太网的照明控制系统用术语和要求 | Entertainment technology - Lighting control systems - Part 3: Terms and requirements for EtherNet networking of lighting control systems |
| DIN 66264-1-1995 | 工业自动化系统和集成.工业机械用多处理器控制系统(MPST).第1部分:平行总线 | Industrial automation systems and integration - Multiprocessor Control System for Industrial Machines (MPST) - Part 1: Parallel bus |
| DIN 66264-2-1988 | 工业自动化.工业机械多重处理控制系统(MPST).信息交换规则 | Multiprocessor control system for industrial machines (MPST); industrial automatics; rules for information interchange |
| DIN CEN/TS 13149-6-2005 | 公共运输.道路车辆调度和控制系统.第6部分:CAN文电内容；英文版本 CEN/TS 13149-6-2005 | Public transport - Road vehicle scheduling and control systems - Part 6: CAN message content; English version CEN/TS 13149-6:2005 |
| DIN EN 12101-1-2006 | 烟和热控制系统.第1部分:烟壁垒规范 | Smoke and heat control systems - Part 1: Specification for smoke barriers (includes Amendment A1:2006) English version of DIN EN 12101-1:2006-06 |
| DIN EN 12101-10 Berichtigung 1-2009 | 烟和热控制系统 第10部分:电源 技术勘误DIN EN 12101-10-2006-01 | Smoke and heat control systems - Part 10: Power supplies; German version EN 12101-10:2005, Corrigendum to DIN EN 12101-10:2006-01; German version EN 12101-10:2005/AC:2007 |
| DIN EN 12101-10-2006 | 烟和热控制系统.第10部分:电力供应 | Smoke and heat control systems - Part 10: Power supplies; English version of DIN EN 12101-10:2006 |
| DIN EN 12101-2-2003 | 烟和热控制系统.第3部分:烟和热的自然排放通风器规范 | Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators; German version EN 12101-2:2003 |
| DIN EN 12101-3 Berichtigung 1-2006 | 烟和热控制系统.第3部分:动力烟和排放热通风机的规范.对 DIN EN 12101-3-2002的勘误 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators; German version EN 12101-3:2002, Corrigenda to DIN EN 12101-3:2002-06; German version EN 12101-3:2002/AC:2005 |
| DIN EN 12101-3-2002 | 烟和热控制系统.第3部分:动力烟和散热通风机 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat exhaust ventilators; German version EN 12101-3:2002 |
| DIN EN 12101-6-2005 | 烟和热控制系统.第6部分:压差系统组件规范 | Smoke and heat control systems - Part 6: Specification for pressure differential systems, Kits; German version EN 12101-6:2005 |
| DIN EN 13149-1-2004 | 公共交通.道路车辆调度和控制系统.第1部分:车上数据传输的WORLDFIP定义和应用规则 | Public transport - Road vehicle scheduling and control systems - Part 1: WORLDFIP definition and application rules for onboard data transmission; English version EN 13149-1:2004 |
| DIN EN 13149-2-2004 | 公共交通.道路车辆调度和控制系统.第2部分:WORLDFIP布线规范 | Public transport - Road vehicle scheduling and control systems - Part 2: WORLDFIP cabling specifications; English version EN 13149-2:2004 |
| DIN EN 13149-4-2005 | 公共交通.道路车辆调度和控制系统.第4部分:CANopen传输总线的一般应用规则 | Public transport - Road vehicle scheduling and control systems - Part 4: General application rules for CANopen transmission buses; English version EN 13149-4:2004 |
| DIN EN 13149-5-2005 | 公共交通.道路车辆调度和控制系统.第5部分:CANopen布线规范 | Public transport - Road vehicle scheduling and control systems - Part 5: CANopen cabling specifications; English version EN 13149-5:2004 |
| DIN EN 13253-2005 | 土工织物及其相关产品.用于外磨损控制系统的土工织物及其相关产品要求的特性 | Geotextiles and geotextile-related products - Required characteristics for use in external erosion control systems(includes Amendment A1:2005); English version of DIN EN 13253:2000 + A1:2005 |
| DIN EN 14065-2003 | 纺织品.经洗涤处理的纺织品.生物污染控制系统 | Textiles - Laundry processed textiles - Biocontamination control system; German version EN 14065:2002 |
| DIN EN 14097-2002 | 航空航天.航天产品保证.不合格控制系统 | Aerospace - Space product assurance - Nonconformance control system; German and English version EN 14097:2001 |
| DIN EN 1804-3-2006 | 地下采矿机械.液压顶棚支撑安全性要求.第3部分:液压控制系统 | Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems; English version of DIN EN 1804-3:2006-07 |
| DIN EN 230-2005 | 燃油器用自动燃烧器控制系统 | Automatic burner control systems for oil burners; English version of DIN EN 230 |
| DIN EN 30-1-4-2002 | 家用燃气灶具.第1-4部分:安全性.带自动燃烧控制系统的含一个或多个燃烧炉的灶具; 德文版本 EN 30-1-4:2002 | Domestic cooking appliances burning gas - Part 1-4: Safety; Appliances having one or more burners with an automatic burner control system; German version EN 30-1-4:2002 |
| DIN EN 30-1-4/A1-2008 | 家用燃气灶具.第1-4部分:安全性.带自动燃烧控制系统的含一个或多个燃烧炉的灶具 | Domestic cooking appliances burning gas - Part 1-4: Safety - Appliances having one or more burners with an automatic burner control system; German version EN 30-1-4:2002/A1:2006 |
| DIN EN 300231-2003 | 电视系统.家用视频节目传送控制系统规范(PDC) | Television systems - Specification of the domestic video Programme Delivery Control system (PDC)(Endorsement of the English version EN 300231 V 1.3.1 (2003-04) as German standard) |
| DIN EN 303213-1-2010 | 高级地面活动导航和控制系统(A-SMGCS).第1部分:应用于含有外部接口的1等级A-SMGCS的欧洲空中交通管理（EC） | Advanced Surface Movement Guidance and Control System (A-SMGCS) - Part 1: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for A-SMGCS Level 1 including external interfaces (Endorsement of the English version EN 303213-1 V1.1.1 (2009-09) as German standard) |
| DIN EN 50094-1993 | MAC/信息包系列用存取控制系统:欧洲密码; 德文版本 EN 50094:1992 | Access control system for the MAC/packet family: EUROCRYPT; german version EN 50094:1992 |
| DIN EN 50094/A1-1995 | MAC/信息包系列用存取数控制系统.欧洲密码; 德文版本 EN 50094:1992/A1:1995 | Access control system for the MAC/packet family: EUROCRYPT; German version EN 50094:1992/A1:1995 |
| DIN EN 50133-1-2003 | 警报系统.安全设施用入口控制系统.第1部分:系统要求 | Alarm systems - Access control systems for use in security applications - Part 1: System requirements; German version EN 50133-1:1996 + A1:2002 |
| DIN EN 50133-2-1-2001 | 报警系统.安全用通路控制系统.第2-1部分:元件的一般要求 | Alarm systems - Access control systems for use in security applications - Part 2-1: General requirements for components; German version EN 50133-2-1:2000 |
| DIN EN 60382-1994 | 过程控制系统模拟气动信号 | Analogue pneumatic signal for process control systems (IEC 60382:1991); German version EN 60382:1993 |
| DIN EN 60546-1-1995 | 工业过程控制系统模拟信号控制器.第1部分:性能评价方法 | Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating the performance (IEC 60546-1:1987); German version EN 60546-1:1993 |
| DIN EN 60546-2-1995 | 工业过程控制系统模拟信号控制器.第2部分:检验和常规测试指南 | Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing (IEC 60546-2:1987); German version EN 60546-2:1993 |
| DIN EN 60730-2-5-2005 | 家用和类似用途的电气自动控制器.第2-5部分:燃烧器电气自动控制系统的特殊要求 | Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems (IEC 60730-2-5:2000, modified + A1:2004, modified); German version EN 60730-2-5:2002 + A1:2004 + A11:2005 |
| DIN EN 60770-1-1999 | 工业过程控制系统用发射机.第1部分:性能评估方法 | Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation (IEC 60770-1:1999); German version EN 60770-1:1999 |
| DIN EN 60770-2-2003 | 工业过程控制系统用变送器.第2部分:检验和常规试验方法 | Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing (IEC 60770-2:2003); German version EN 60770-2:2003 |
| DIN EN 60770-3-2007 | 工业过程控制系统用发送机.第3部分:智能发射机的性能评定方法 | Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters (IEC 60770-3:2006); German version EN 60770-3:2006 |
| DIN EN 60873-1-2004 | 工业过程控制系统用电动和气动模拟图表记录仪.第1部分:性能评价方法 | Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Part 1: Methods for performance evaluation (IEC 60873-1:2003); German version EN 60873-1:2004 |
| DIN EN 60873-2-2004 | 工业过程控制系统用电动和气动模拟图表记录仪.第2部分:检验指南和常规试验 | Electrical and pneumatic analogue chart recorders for use in industrial process control systems - Part 2: Guidance for inspection and routine testing (IEC 60873-2:2004); German version EN 60873-2:2004 |
| DIN EN 61003-1-2004 | 工业过程控制系统.模拟输入和两路或多路输出的仪器.第1部分:性能评定方法 | Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance (IEC 61003-1:2004); German version EN 61003-1:2004 |
| DIN EN 61297-1996 | 工业过程控制系统.鉴定用适配控制器分类 | Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation (IEC 61297:1995); German version EN 61297:1995 |
| DIN EN 61377-3-2003 | 铁路设施.铁路车辆.第3部分:间接变流器供电的交流电动机及其控制系统的组合测试 | Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control systems (IEC 61377-3:2002); German version EN 61377-3:2002 |
| DIN EN 61499 Bb.1-2007 | 工业过程测量和控制系统的功能块.补充件1:指导信息 | Function blocks for industrial-process measurement and control systems - Supplement 1: Tutorial information - (IEC/TR 61499-3:2004) |
| DIN EN 61514-2-2004 | 工业过程控制系统.第2部分:带气动输出的智能阀定位器的性能评估方法 | Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs (IEC 61514-2:2004); German version EN 61514-2:2004 |
| DIN EN 61514-2002 | 工业过程控制系统.气动输出阀门定位器性能评价方法 (IEC 61514:2000); 德文版本 EN 61514:2002 | Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs (IEC 61514:2000); German version EN 61514:2002 |
| DIN EN 62061 Berichtigung 1-2006 | 机械安全.与安全有关的电气、电子和可编程序电子控制系统的功能安全(IEC 62061:2005) | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005); German version EN 62061:2005, Corrigenda to DIN EN 62061 (VDE 0113-50):2005-10 |
| DIN EN 62061 Berichtigung 2-2009 | 机械安全 与电气、电子和可编程电子控制系统安全相关的功能安全性 技术勘误DIN EN 62061(VDE 0113-50)-20 | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005); German version EN 62061:2005, Corrigendum to DIN EN 62061 (VDE 0113-50):2005-10 |
| DIN EN 62061-2005 | 机械安全.与安全有关的电气、电子和可编程序电子控制系统的功能安全 | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005); German version EN 62061:2005 |
| DIN EN 62065-2003 | 海上导航及无线电通信设备和系统.航线控制系统.操作和性能要求、试验方法及要求的试验结果 | Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results (IEC 62065:2002); German version EN 62065:2002 |
| DIN EN 62264-1-2008 | 企业控制系统集成.第1部分:模型和术语 | Enterprise-control system integration - Part 1: Models and terminology (IEC 62264-1:2003); German version EN 62264-1:2008 |
| DIN EN 62264-2-2008 | 企业控制系统集成.第2部分:对象模型属性 | Enterprise-control system integration - Part 2: Object model attributes (IEC 62264-2:2004); English version EN 62264-2:2008 |
| DIN EN 62264-3-2008 | 企业控制系统集成.第3部分:制造过程管理的活动模型 | Enterprise-control system integration - Part 3: Activity models of manufacturing operations management (IEC 62264-3:2007); German version EN 62264-3:2007, text in English |
| DIN EN 62290-1-2007 | 铁路设施.城市指导运输管理和命令/控制系统.第1部分:系统原则和基本原理(IEC 62290-1-2006) | Railway applications - Urban guided transport management and command/control systems - Part 1: System principles and fundamental concepts (IEC 62290-1:2006); German version EN 62290-1:2006 |
| DIN EN 62337-2007 | 加工工业中电子设备、测量仪表和控制系统的交付使用.具体阶段和里程碑 | Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones (IEC 62337:2006); German version EN 62337:2007 |
| DIN EN ISO 11674-2002 | 船舶和航海技术.航向控制系统 | Ships and marine technology - Heading control systems (ISO 11674:2000); German version EN ISO 11674:2001 |
| DIN EN ISO 13628-6-2008 | 石油和天然气工业.海底生产系统设计和操作.第6部分:海底生产控制系统(ISO 13628-6:2006) | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006); English version EN ISO 13628-6:2006 |
| DIN EN ISO 13849-1-2008 | 机械安全.控制系统的安全相关部件.第1部分:设计用一般原理(ISO 13849-1-2006).英文版本DIN EN ISO 13849-1- | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006); English version of DIN EN ISO 13849-1:2008-12 |
| DIN EN ISO 13849-2 Berichtigung 1-2009 | 机械安全.控制系统的安全相关部件.第2部分:鉴定.技术勘误DIN EN ISO 13849-2-2008-09 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003); German version EN ISO 13849-2:2008, Corrigendum to DIN EN ISO 13849-2:2008-09 |
| DIN EN ISO 13849-2-2008 | 机械安全.控制系统的安全相关部件.第2部分:验证 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003); English version of DIN EN ISO 13849-2:2008-09 |
| DIN EN ISO 15005-2003 | 道路车辆.运输信息和控制系统的人类工效学特性.对话管理原则和一致性程序 | Road vehicles - Ergonomic aspects of transport and control systems - Dialogue management principles and compliance procedures (ISO 15005:2002); German version EN ISO 15005:2002 |
| DIN EN ISO 15007-1-2003 | 道路车辆.与运输信息和控制系统有关的司机目视行为的测定.第1部分:定义和参数 | Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO 15007-1:2002); German version EN ISO 15007-1:2002 |
| DIN EN ISO 15008-2003 | 道路车辆.运输信息和控制系统的人类工效学方面.车内目视显示规范和一致性规程 | Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle visual presentation (ISO 15008:2003); German version EN ISO 15008:2003 |
| DIN EN ISO 16201-2006 | 残疾人技术辅助器具.日常生活环境控制系统 | Technical aids for persons with disability - Environmental control systems for daily living (ISO 16201:2006); English version of DIN EN ISO 16201:2006-12 |
| DIN EN ISO 16484-2-2004 | 建筑物自动化和控制系统.第2部分:硬件 | Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004); German version EN ISO 16484-2:2004 |
| DIN EN ISO 16484-3-2005 | 建筑自动化和控制系统(BACS).第3部分:功能 | Building automation and control systems (BACS) - Part 3: Functions (ISO 16484-3:2005); English version of DIN EN ISO 16484-3:2005 |
| DIN EN ISO 16484-5-2008 | 建筑物自动化和控制系统.第5部分:数据通信协议 | Building automation and control systems - Part 5: Data communication protocol (ISO 16484-5:2007); English version EN ISO 16484-5:2008, only on CD-ROM |
| DIN EN ISO 17287-2003 | 道路车辆.运输信息和控制系统的人类工效学方面.驾驶时适用性的评定规程 | Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving (ISO 17287:2003); German version EN ISO 17287:2003 |
| DIN IEC 60381-1-1985 | 过程控制系统模拟信号.第1部分:直流电流信号 | Analogue signals for process control systems; direct current signals; identical with IEC 60381-1, edition 1982 |
| DIN IEC 60381-2-1980 | 过程控制系统模拟信号.第2部分:直流电压信号 | Analogue signals for process control systems; part 2: direct voltage signals |
| DIN IEC 60671-2007 | 核电站.对安全性重要的仪器和控制系统.监督测试 | Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing (IEC 60671:2007) |
| DIN IEC 60709-2006 | 核电站.对安全性至关重要的仪器仪表和控制系统.隔离(IEC 60709-2004) | Nuclear power plants - Instrumentation and control systems important to safety - Separation (IEC 60709:2004) |
| DIN IEC 61226-2005 | 核电厂.安全重要仪表和控制系统.仪表和控制功能分级 | Nuclear power plants - Instrumentation and control systems important to safety - Classification of instrumentation and control functions (IEC 61226:2005) |
| DIN IEC 61513/A100-2005 | 核电厂.对安全重要的仪器仪表和控制系统.系统的一般要求.国家附录ND (资料性): 其他IEC标准的共同有效的规 | Nuclear power plants - Instrumentation and control systems important to safety - General requirements for systems - National annex ND (informative): Co-valid provisions of other IEC Standards |
| 编号 | 中文名称 | 英文名称 |