编号 | 中文名称 | 英文名称 |
BS 2452-1954
| 电驱动高架式移动基座悬臂起重机(高架式门座悬臂起重机)规范
| Specification for electrically driven jib cranes mounted on a high pedestal or portal carriage (high pedestal or portal jib cranes)
|
BS 2799-1974
| 建筑与工程用动力驱动塔式起重机规范
| Specification for power-driven tower cranes for building and engineering construction
|
BS 2853-1957
| 架空吊车道钢梁的设计与试验规范
| Specification for the design and testing of steel overhead runway beams
|
BS 3037-1-1958
| 起重机轨轮用轮箍规范.第1部分:双法兰平行轮距轮箍
| Specification for tyres for crane rail wheels - Double-flanged parallel-tread tyres
|
BS 3037-2-1975
| 起重机轨轮用轮箍规范.第2部分:锻制或轧制双法兰钢轨轮与钢轮箍(米制单位)规范
| Specification for tyres for crane rail wheels - Forged or rolled steel double flanged rail wheels and tyres (metric units)
|
BS 327-1964
| 动力驱动悬臂式起重机规范
| Specification for power-driven derrick cranes
|
BS 357-1958
| 动力驱动的动臂式起重机(有轨低架型)规范
| Specification for power-driven travelling jib cranes (rail-mounted low carriage type)
|
BS 3810-4-1968
| 材料装卸术语.第4部分起重机术语
| Glossary of terms used in materials handling - Terms used in connection with cranes
|
BS 466-1984
| 一般用途的动力驱动高架移动式起重机、中型移动式起重机和重型移动式起重机规范
| Specification for power driven overhead travelling cranes, semi-goliath and goliath cranes for general use
|
BS 5667-13-1979
| 连续式机械装卸设备规范.安全性要求.第13部分:成组货件:悬臂式起重机与推杆式输送机
| Specification for continuous mechanical handling equipment - safety requirements - Unit loads: arm elevators and push bar conveyors
|
BS 5744-1979
| 起重机(桥式起重机、悬挂移动式起重机、轨道起重机、高座式起重机与龙门转臂式码头起重机、手动轻便起重机
| Code of practice for safe use of cranes (overhead/underhung travelling and goliath cranes, high pedestal and portal jib dockside cranes, manually-operated and light cranes, container handling cranes and rail-mounted low carriage cranes)
|
BS 7121-1-2006
| 起重机安全使用的实施规程.总则
| Code of practice for safe use of cranes - General
|
BS 7121-11-1998
| 起重机安全使用实用规程.近海起重机
| Code of practice for safe use of cranes - Offshore cranes
|
BS 7121-12-1999
| 起重机安全操作实施规程.救援服务车和设备.实施规程
| Code of practice for safe use of cranes - Recovery vehicles and equipment - Code of practice
|
BS 7121-14-2005
| 起重机安全操作实施规程.起重机侧臂管道敷设机
| Code of practice for safe use of cranes - Side boom pipelayers
|
BS 7121-2-2003
| 起重机安全操作实用规程.验收、试验和检查
| Code of practice for safe use of cranes - Inspection, testing and examination
|
BS 7121-3-2000
| 起重机安全操作规程.移动式起重机
| Code of practice for safe use of cranes - Mobile cranes
|
BS 7121-4-1997
| 起重机安全使用实用规程.卡车式装载机
| Code of practice for safe use of cranes - Lorry loaders
|
BS 7121-5-2006
| 起重机安全使用实施规则.塔式起重机
| Code of practice for safe use of cranes - Tower cranes
|
BS 7212-2006
| 施工起重机的安全使用实施规则
| Code of practice for the safe use of construction hoists
|
BS 7333-1990
| 回转臂起重机规范
| Specification for slewing jib cranes
|
BS AU 50-1.3.3-1996
| 轮胎和车轮规范.轮胎.越野轮胎.移动式吊车和类似专用机械轮胎规范
| Specification for tyres and wheels - Tyres - Off-the-road tyres - Specification for tyres for mobile cranes and similar specialized machines |
BS DD CEN/TS 13001-3-2-2005
| 起重机.一般设计.绳索绕缠系统中钢丝绳的极限状态和合格检验
| Cranes - General design - Limit states and proof of competence of wire ropes in reeving systems
|
BS DD CEN/TS 13001-3.1-2005
| 起重机.一般设计.钢结构性能的极限状态和检验
| Cranes - General design - Limit states and proof of competence of steel structures
|
BS EN 12077-2-1999
| 起重机安全.卫生和安全要求.限动及指示设备
| Cranes safety - Requirements for health and safety - Limiting and indicating devices
|
BS EN 1255-1996
| 内河航运船只.旋臂起重机
| Inland navigation vessels - Swing derricks
|
BS EN 12644-1-2001
| 起重机.使用和试验信息.说明
| Cranes - Information for use and testing - Instructions
|
BS EN 12644-2-2000
| 起重机.使用和试验信息.标记
| Cranes - Information for use and testing - Marking
|
BS EN 12999-2003
| 起重机.装载机
| Cranes - Loader cranes
|
BS EN 13000-2004
| 起重机.移动式起重机
| Cranes - Mobile cranes
|
BS EN 13001-1-2005
| 起重机安全.一般设计.一般原则和要求
| Crane safety - General design - General principles and requirements
|
BS EN 13001-2-2005
| 起重机安全.一般设计.负载效应
| Crane safety - General design - Load actions
|
BS EN 13135-1-2004
| 起重机.安全.设计.设备要求.电工设备
| Cranes - Safety - Design - Requirements for equipment - Electrotechnical equipment
|
BS EN 13135-2-2004
| 起重机.设备.非电工技术设备
| Cranes - Equipment - Non-electrotechnical equipment
|
BS EN 13155-2003
| 起重机.安全.非固定式荷载提升附属装置
| Cranes - Safety - Non-fixed load lifting attachments
|
BS EN 13157-2004
| 起重机.安全.手动升降设备
| Cranes - Safety - Hand powered lifting equipment
|
BS EN 13557-2003
| 起重机.控制装置与控制台
| Cranes - Controls and control stations
|
BS EN 13586-2004
| 起重机.检修孔
| Cranes - Access
|
BS EN 13852-1-2005
| 起重机.海上起重机.通用海上起重机
| Cranes - Offshore cranes - General-purpose offshore cranes
|
BS EN 13852-2-2005
| 起重机.近海起重机.浮式起重机
| Cranes - Offshore cranes - Floating cranes
|
BS EN 14238-2005
| 起重机.手动控制载荷操纵设备
| Cranes - Manually controlled load manipulating devices
|
BS EN 14439-2006
| 起重机.安全性.塔式起重机
| Cranes - Safety - Tower cranes
|
BS EN 14502-1-2005
| 起重机.载人用升降设备.第1部分:吊篮
| Cranes - Equipment for lifting persons - Part 1: Suspended baskets
|
BS EN 14502-2-2005
| 起重机.载人用提升设备.升降控制台
| Cranes - Equipment for the lifting of persons - Elevating control stations
|
BS EN 15056-2006
| 起重机.集装箱装卸起吊机用要求
| Cranes — Requirements for container handling spreaders
|
BS EN 1993-6-2007
| 欧洲法规3:钢结构设计.起重机支承结构
| Eurocode 3. Design of steel structures - Crane supporting structures
|
BS EN 45510-6-8-2000
| 发电站设备采购指南.涡轮机辅助设备.起重机.第8节:起重机
| Guide for the procurement of power station equipment - Turbine auxiliaries - Cranes - Section 8: Cranes
|
BS EN 818-4-1997
| 起重用短节链条.安全性.第4部分:吊链.8级
| Short link chain for lifting purposes - Safety - Chain slings - Grade 8
|
BS ISO 10245-4-2005
| 起重机.限制器和指示器.动臂起重机
| Cranes - Limiting and indicating devices - Jib cranes
|
BS ISO 10972-1-1998
| 起重机.机构要求.第1部分:综述
| Cranes - Requirements for mechanisms - General
|
BS ISO 11629-2006
| 起重机.起重机及其组件质量评估
| Cranes - Measurement of the mass of a crane and its components
|
BS ISO 11630-1998
| 起重机.轮位对准测量
| Cranes - Measurement of wheel alignment
|
BS ISO 11994-1998
| 起重机.有效性.词汇
| Cranes - Availability - Vocabulary
|
BS ISO 12478-1-1998
| 起重机.维修手册.综述
| Cranes - Maintenance manual - General
|
BS ISO 12488-1-2005
| 起重机.轮子和移动及横动轨道的公差.总则
| Cranes - Tolerances for wheels and travel and traversing tracks - General
|
BS ISO 12488-4-2004
| 起重机.轮子和移动及横动轨道的公差.动臂起重机
| Cranes - Tolerances for wheels and travel and traversing tracks - Jib cranes
|
BS ISO 13202-2003
| 起重机.速度和时间参数的测量
| Cranes - Measurement of velocity and time parameters
|
BS ISO 15513-2000
| 起重机.起重机司机(操纵者)、吊装工、信号员和鉴定员的资格要求
| Cranes - Competency requirements for crane drivers (operators), slingers, signallers and assessors
|
BS ISO 16881-1-2005
| 起重机.轨道轮和相关触轮滑轨支撑结构的设计计算.总则
| Cranes - Design calculation for rail wheels and associated trolley track supporting structure - General
|
BS ISO 1834-1999
| 起重用短环链.验收总则
| Short link chain for lifting purposes - General conditions of acceptance
|
BS ISO 23853-2005
| 起重机.吊装工和信号手的培训
| Cranes - Training of slingers and signallers
|
BS ISO 4306-5-2006
| 起重机.词汇.桥式起重机和龙门起重机
| Cranes - Vocabulary - Bridge and gantry cranes
|
BS ISO 4308-1-2003
| 起重机和提升设备.钢丝绳的选用.总则
| Cranes and lifting appliances - Selection of wire ropes - General
|
BS ISO 4309-2004
| 起重机.金属丝绳.保养、维修、安装、检查和报废
| Cranes - Wire ropes - Care, maintenance, installation, examination and discard
|
BS ISO 8566-4-1998
| 起重机.驾驶室.第4部分:旋臂式起重机
| Cranes - Cabins - Jib cranes
|
BS ISO 9926-3-2005
| 起重机.司机培训.塔式起重机
| Cranes - Training of drivers - Tower cranes
|
BS MA 81-1980
| 船用起重机配件规范
| Specification for ships' derrick fittings
|
KIT 176-2005
| BS EN 13001:起重机安全设计汇编
| BS EN 13001: Crane safety design kit
|
编号 | 中文名称 | 英文名称 |