法国起重机标准(NF crane standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号中文名称英文名称
NF C79-132-1999 机械设备安全.机器的电气设备.第32部分:起重机的要求 (Safety of machinery. Electrical equipment of machines. Part 32 : requirements for hoisting machines.)
NF E52-016-2001 起重机.使用和试验信息.第1部分:指导 (Cranes - Information for use and testing - Part 1 : instructions.)
NF E52-017-2000 起重机.使用和试验的信息.第2部分:标记 (Cranes - Information for use and testing - Part 2 : marking.)
NF E52-019-2-2000 提升设备.控制装置.设计和特性.第2部分:流动式起重机的基本装配和要求 (Lifting appliance - Controls - Layout and characteristics - Part 2 : basic arrangement and requirements for mobile cranes.)
NF E52-072-1990 起重机.液压装置.设计和实施规则 (LIFTING EQUIPMENT. HYDRAULIC EQUIPMENT. DESIGN AND CONSTRUCTION RULES.)
NF E52-073-1-2000 起重机.词汇.第1部分:总则 (Cranes - Vocabulary - Part 1 : general.)
NF E52-075-1975 起重和装卸设备.起重机.总则 (LIFTING APPLIANCES. CRANES. GENERALITIES.)
NF E52-077-1974 龙门起重机.招标用核对表 (CROSSCRANES-CHECK-LIST FOR BIDDING.)
NF E52-081-1975 塔式起重机.计算规则 (TOWER CRANES - CALCULATING RULES)
NF E52-082-1982 塔式起重机.一般安全规则 (GENERAL RULES RELATIVE TO SAFETY OF TOWER CRANES.)
NF E52-086-1978 移动式起重机.超载的安全装置 (MOBILE CRANES. SAFETY DEVICES AGAINST OVERLOADING.)
NF E52-087-1983 移动式起重机.一般安全规则 (MOBILE CRANES. GENERAL SAFETY RULES.)
NF E52-088-2002 起重机.装料设备起重机 (Cranes - Loader cranes.)
NF E52-091-2003 起重机.安全.非固定式荷载提升附属装置 (Cranes - Safety - Non-fixed load lifting attachments.)
NF E52-110-1980 起重机械和设备.机械吊装设备计算规则.金属构架 (LIFTING EQUIPMENTS. CALCULATING RULES FOR MECANILLY OPERATED LIFTING EQUIPEMENTS. METAL STRUCTURES.)
NF E52-115-2-2000 提升设备.分类.第2部分:汽车起重机 (Lifting appliances - Classification - Part 2 : mobile cranes.)
NF E52-120-1972 桥式起重机.总则.术语 (OVERHEAD TRAVELLING CRANES. GENERAL. TERMINOLOGY.)
NF E52-123-1973 移动式高架起重机.招标的标准格式 (OVERHEAD TRAVELLING CRANES. TYPICAL QUESTIONNAIRE FOR ENQUIRIES.)
NF E52-124-1975 桥式起重机.控制机构.按钮盒.配置 (CRANES RUNWAYS-CONTROLS-BOX WITH PUSH BUTTONS LOCATION.)
NF E52-125-1975 桥式起重机.地面控制连接的建议 (CRANES RUNWAYS. RECOMMENDATIONS ON THE ADDING OF CONTROL FROM THE GROUND.)
NF E52-126-1975 桥式起重机.试验和检验状态 (LIFTING EQUIPMENT. OVERHEAD TRAVELLING CRANES. PERFORMANCE OF TESTS.)
NF E52-127-1983 桥式起重机和龙门起重机.驾驶台.运转装置 (Overhead travelling cranes and portal cranes with eahs : controls.)
NF E52-128-1977 起重和装卸.桥式起重机和龙门起重机.机械构件的型号和材料 (LIFTING AND HANDLING. OVERCRANES AND CROSSCRANES. MATERIALS AND TYPES OF COMPONENTS USED IN THE MECHANISME.)
NF E52-130-1983 桥式起重机和龙门起重机.带驾驶室.驾驶室玻璃窗 (Overhead travelling and protal cranes. Glazing of cabs.)
NF E52-153-1984 起重机械和设备.竖向钢板吊装夹具.一般特征.设计规则和试验 (LIFTING EQUIPMENTS. PLATE GRIPS. GENERAL CHARACTERISTICS,CONSTRUCTION RULES AND TEST METHODS.)
NF E52-401-1955 起重机械操纵手势.在工厂和工地上建议的常规装卸手势 (CONTROL SIGNALS FOR LIFTING MACHINERY. RECOMMENDED SIGNALS FOR ORDINARY HANDLING OPERATIONS IN FACTORIES AND ON BUILDING SITES.)
NF E52-402-2000 起重机.钢丝绳.检验和报废的实施规范 (Cranes - Wire ropes - Code of practice for examination and discard.)
NF H96-407-1996 工业运载汽车.叉式起重机设备叉杆的修理和检验 (Industrial trucks. Inspection and repair of fork arms in service on fork-lift trucks.)
NF J83-250-1995 内河航行船只.回转式桅杆起重机 (Inland navigation vessels. Swing derricks.)
NF P22-615-1978 桥式活动吊车转动梁.工作变形和公差 (METAL CONSTRUCTION. ROLLING BEAMS FOR OVERHEAD CRANES. DEFORMATIONS IN OPERATION AND TOLERANCES.)
NF X50-001-6-8-2000 发电站设备采购指南.第6部分:涡轮机辅助设备.第8节:起重机 (Guide for procurement of power station equipment - Part 6 : turbine auxiliaries - Section 8 : cranes.)
编号中文名称英文名称

返回