| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 3338-7-1961 | 锡及锡合金取样及分析方法.第7部分:焊料中银含量测定方法(硫氰酸铵容量法) | Methods for the sampling and analysis of tin and tin alloys - Method for the determination of silver in solders (volumetric: ammonium thiocyanate method) |
| BS 3985-2003 | 血红蛋白光谱测定用氰化正铁血红蛋白制备标准 | Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry |
| BS 4317-11-1976 | 谷物和豆类测试方法.第11部分:豆科作物配糖氢氰酸含量测定 | Methods of test for cereals and pulses - Determination of glycosidic hydrocyanic acid in pulses |
| BS 4325-12-1996 | 油料种子残余物的分析方法.第12部分:使用高效液相色谱法对葡萄糖异硫氰酸盐含量测定 | Methods for analysis of oilseed residues - Determination of glucosinolates content by high-performance liquid chromatography |
| BS 4841-1-2006 | 建筑最终用途用硬质聚氨酯(PUR)和聚异氰尿酸酯(PIR)制品.带自动粘附或分离粘接表面的叠层绝缘板用规范 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Specification for laminated insulation boards with auto-adhesively or separately bonded facings |
| BS 4841-2-2006 | 建筑最终用途用硬质聚氨酯(PUR)和聚异氰尿酸酯(PIR)制品.内墙隔板和天花板用于隔热带自动粘附粘接表面的叠 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Specification for laminated boards with auto-adhesively bonded facings for use as thermal insulation for internal wall linings and ceilings |
| BS 4841-3-2006 | 建筑最终用途用硬质聚氨酯(PUR)和聚异氰尿酸酯(PIR)制品.建立在沥青屋顶膜下用作屋顶板隔热带自动粘附或分 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under built up bituminous roofing membranes |
| BS 4841-4-2006 | 建筑物最终用途设施用刚性聚氨酯(PUR)和聚异氰脲酸酯(PIR).不含沥青单层屋顶薄膜下用作屋顶板隔热带自身黏 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) products for building end-use applications - Specification for laminated insulation boards (roofboards) with auto-adhesively or separately bonded facings for use as roofboard thermal insulation under non-bituminous single-ply roofing membranes |
| BS 4841-5-2006 | 建筑物最终用途设施用刚性聚氨酯(PUR)和聚异氰脲酸酯(PIR).用作斜屋顶隔热板带自身黏附或分离粘合面的叠层 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Specification for laminated boards (roofboards) with auto-adhesively or separately bonded facings for use as thermal insulation boards for pitched roofs |
| BS 4841-6-2006 | 建筑物最终用途设施用刚性聚氨酯(PUR)和聚异氰脲酸酯(PIR).用作地板隔热带自身黏附或分离粘合面的叠层板用 | Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications - Specification for laminated boards with auto-adhesively or separately bonded facings for use as thermal insulation for floors |
| BS 5241-2-1991 | 施工现场配制与喷涂用硬聚氨酯和聚异三聚氰脲酸酯泡沫塑料.第2部分:绝热或弹性配制泡沫塑料的规范 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site - Specification for dispensed foam for thermal insulation or buoyancy applications |
| BS 5608-1993 | 管道工程和设备隔热用预成型刚性聚氨基甲酸乙酯(PUR)和聚异氰尿酸酯(PIR)泡沫规范 | Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation of pipework and equipment |
| BS 5658-1979 | 电镀用含金氰化钾规范 | Specification for gold potassium cyanide for electroplating |
| BS 6068-2.17-1986 | 水质.第2部分:物理、化学和生物化学方法.第17节:氰化物总含量测定方法 | Water quality - Physical, chemical and biochemical methods - Methods for determination of total cyanide |
| BS 6068-2.18-1986 | 水质.第2部分:物理、化学和生物化学方法.第18节:易游离氰化物含量测定方法 | Water quality - Physical, chemical and biochemical methods - Methods for the determination of easily liberatable cyanide |
| BS 6068-2.19-1986 | 水质.第2部分:物理、化学和生物化学方法.第19节:氯化氰含量测定方法 | Water quality - Physical, chemical and biochemical methods - Method for determination of cyanogen chloride |
| BS 622-1967 | 电镀用氰化钾和氰化钠规范 | Specification for potassium and sodium cyanides for electroplating |
| BS 6782-10-1998 | 涂料粘合剂.聚二异氰酸酯树脂单体二异氰酸盐的测定 | Binders for paints - Determination of monomeric diisocyanates in polyisocyanate resins |
| BS 7021-1989 | 采用喷涂刚性聚氨基甲酸乙酯和聚异三聚氰脲酸酯泡沫对屋顶外部进行隔热的实用规程 | Code of practice for thermal insulation of roofs externally by means of sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam |
| BS 7969-2004 | 胶粘剂.1、2和3类型乙基和甲基氰基丙烯酸酯 | Adhesives - Ethyl and methyl cyanoacrylate types 1,2 and 3 |
| BS EN 1242-2005 | 胶粘剂.异氰酸酯含量的测定 | Adhesives - Determination of isocyanate content |
| BS EN 12931-2008 | 人类生活用水处理用化学品.应急用化学物质.无水二氯异氰脲酸钠 | Chemicals used for water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous |
| BS EN 12932-2008 | 人类生活用水处理用化学品.应急用化学物质.二水合二氯异氰尿酸钠 | Chemicals used for water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate |
| BS EN 12933-2008 | 人类生活用水处理用化学品.应急用化学品.三氯异氰尿酸 | Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acid |
| BS EN 13130-8-2004 | 接触食品的材料和物品.有限制的塑料物质.塑料中异氰酸酯的测定 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of isocyanates in plastics |
| BS EN 13999-4-2007+A1-2009 | 粘合剂.使用后低溶剂或无溶剂粘合剂排放特性的快速测量方法.挥发性二异氰酸盐的测定 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4:Determination of volatile diisocyanates |
| BS EN 14308-2009 | 工业装置和建筑设备用热绝缘产品.工厂制硬质聚氨基甲酸乙酯泡沫和聚异氰尿酸酯泡沫产品.规范 | Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification |
| BS EN 14322-2004 | 木基板材.内部用三聚氰胺面板.定义、要求和分类 | Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification |
| BS EN 14323-2004 | 木基板材.内部用三聚氰胺面板.试验方法 | Wood-based panels - Melamine faced boards for interior uses - Test methods |
| BS EN 15032-2006+A1-2008 | 游泳池水处理用化学试剂.三氯异氰尿酸 | Chemicals used for treatment of swimming pool water - Trichloroisocyanuric acid |
| BS EN 15072-2006+A1-2008 | 游泳池水的处理用化学试剂.无水二氯异氰脲酸钠 | Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate, anhydrous |
| BS EN 15073-2006+A1-2008 | 游泳池水处理用化学试剂.二水合物二氯异氰酸钠 | Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate, dihydrate |
| BS EN 15168-2006 | 表面活性剂.羟值测定.对甲苯磺酰氟异氰酸盐(TSI)法和四丁铵氢氧化物电位滴定法 | Surface active agents - Determination of hydroxyl value - p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide |
| BS EN 15360-2007 | 肥料.双氰胺的测定.使用高效液相色谱(HPLC)法 | Fertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC) |
| BS EN 15560-2009 | 肥料.无硝酸盐的氰胺化钙中总氮含量的测定 | Fertilizers - Determination of total nitrogen in calcium cyanamide nitrate free |
| BS EN 15561-2009 | 肥料.含硝酸盐的氰胺化钙中总氮含量的测定 | Fertilizers - Determination of total nitrogen in calcium cyanamide containing nitrates |
| BS EN 15562-2009 | 肥料.氰胺氮的测定 | Fertilizers - Determination of cyanamide nitrogen |
| BS EN 60684-3-151-1998 | 绝缘软套管规范.各型套管规范要求.挤压PVC/氰橡胶.通用 | Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Extruded PVC/nitrile rubber - General purpose |
| BS EN 60893-3-3-2004 | 绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范.三聚氰胺树脂基硬质层压薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins |
| BS EN 61249-2-10-2003 | 印刷板和互连结构用材料.包被和非包被增强基材.规定了易燃性的包铜改良或未改良的氰酸盐酯环氧化溴编织E型 | Materials for printed boards and other interconnecting structures - Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-13-1999 | 互联结构材料.增强基材、包被和未包被增强基材分规范集.阻燃型铜包被的非编织的芳香聚酰胺氰酸酯层压板材 | Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Cyanate ester non-woven aramid laminate of defined flammability, copper-clad - Cyanate ester non-woven aramid laminate of defined flammability copper-clad |
| BS EN ISO 10283-2007 | 涂料和清漆用粘合剂.异氰酸酯树脂中单体二异氰酸盐的测定 | Binders for paints and varnishes - Determination of monomeric diisocyanates in isocyanate resins |
| BS EN ISO 10304-3-1997 | 水质.用离子液相色谱法测定已溶解的阴离子.铬酸盐,碘化物,亚硫酸盐,硫氰酸盐和硫代硫酸盐的测定 | Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate |
| BS EN ISO 105-X14-1997 | 纺织品.色牢度试验.羊毛耐酸性氯化色牢度.二氯异氰尿酸钠 | Textiles. Tests for colour fastness. Colour fastness to acid chlorination of wool. Sodium dichloroisocyanurate |
| BS EN ISO 14403-2002 | 水质.连续流量分析测定总氰化物和游离氰化物含量 | Water quality - Determination of total cyanide and free cyanide by continuous flow analysis |
| BS EN ISO 14896-2009 | 塑料.聚氨酯原材料.异氰酸酯含量测定 | Plastics - Polyurethane raw materials - Determination of isocyanate content |
| BS EN ISO 15234-2010 | 涂料和清漆.甲醛排放涂层和三聚氰胺泡沫的试验.一个小的试验箱内甲醛的稳态浓度的测定 | Paints and varnishes. Testing of formaldehyde-emitting coatings and melamine foams. Determination of the steady-state concentration of formaldehyde in a small test chamber |
| BS EN ISO 4614-2000 | 塑料.三聚氰胺--甲醛模塑.可萃取的甲醛的测定 | Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde |
| BS ISO 11262-2003 | 土壤质量.氰化物的测定 | Soil quality - Determination of cyanide |
| BS ISO 14898-1999 | 塑料制品.聚氨酯生材料.芳香异氰酸酯.酸度测定 | Plastics - Polyurethane raw materials - Aromatic isocyanates - Determination of acidity |
| BS ISO 15028-2004 | 塑料.用于聚氨酯生产的芳香族异氰酸酯.可水解氯的测定 | Plastics - Aromatic isocyanates for use in the production of polyurethanes - Determination of hydrolysable chlorine |
| BS ISO 16702-2008 | 工作场所空气质量.用2-(1-甲氧基苯基)呱嗪和液相色谱法测定空气中异氰酸盐总量 | Workplace air quality - Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography |
| BS ISO 17380-2005 | 土质.易释放的氰化物和氰化物总含量的测定.连续流量分析法 | Soil quality - Determination of total cyanide and easily released cyanide - Continuous-flow analysis method |
| BS ISO 17734-1-2006 | 在空气中用液相色谱法和质谱学对有机氮化合物的测定.用二丁胺衍生物的异氰酸酯 | Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry - Isocyanates using dibutylamine derivatives |
| BS ISO 17734-2-2006 | 在空气中用液相色谱法和质谱学对有机氮化合物的测定.用二丁胺和乙基氯甲酸酯衍生物的胺和氨基异氰酸酯 | Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry - Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives |
| BS ISO 17735-2009 | 工作场所空气环境.使用1-(9-蒽甲基)哌嗪(MAP)试剂和液相色谱法测定空气中的总异氰酸酯基含量 | Workplace atmospheres - Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography |
| BS ISO 26603-2008 | 塑料.聚氨酯生产用芳族异氰酸盐.总氯含量的测定 | Plastics - Aromatic isocyanates for use in the production of polyurethanes - Determination of total chlorine |
| BS ISO 3622-1996 | 摄影技术.洗片化学制品.硫氰酸铵规范 | Photography - Processing chemicals - Specifications for ammonium thiocyanate |
| BS ISO 3624-1994 | 摄影技术.洗片化学制品.铁氰化钾规范 | Photography - Processing chemicals - Specifications for potassium ferricyanide |
| BS ISO 3626-1996 | 摄影技术.洗片化学制品.硫氰酸钾规范 | Photography - Processing chemicals - Specification for potassium thiocyanate |
| BS ISO 7766-2003 | 摄影冲洗废液.氰化物分析.用光谱法测定六氰基高铁酸盐(Ⅱ)和六氰基高铁酸盐(Ⅲ) | Processing photographic wastes - Analysis of cyanides - Determination of hexacyanoferrate(II) and hexacyanoferrate(III) by spectrometry |
| 编号 | 中文名称 | 英文名称 |