| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| EN 1242-1998 | 粘合剂 异氰酸酯含量测定 | Adhesives - Determination of isocyanate content |
| EN 12931-2000 | 人类生活用水处理用化学制品 应急用化学制品 无水二氯异氰脲酸钠 | Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous |
| EN 12932-2000 | 人类生活用水处理用化学制品 应急用化学制品 二水二氯异氰脲酸钠 | Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate |
| EN 12933-2000 | 人类生活用水处理用化学制品 应急用化学制品 三氯异氰脲酸 | Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acid |
| EN 60893-3-3-1995 | 电工用热固性树脂基工业刚性层压板规范 第３部分：专用材料规范 活页３：对三聚氰胺树 脂硬质层压片的要 | Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for rigid laminated sheets based on melamine resins (IEC 60893-3-3:1993) |
| EN 61249-2-10-2003 | 印制板和其它互连结构用材料 第2-10部分：包被和非包被增强基材 阻燃型铜包被的氰酸酯、溴化环氧改进型或 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials, clad and unclad; Cyanate ester, brominated epoxide modified or unmodified woven E-glass reinforced laminated sheets of defined flammability (vertica |
| EN 61249-2-12-1999 | 印制板和其它互连结构材料 第2-12部分：包被和非包被增强基材分规范集 阻燃型铜包被的非编织芳香聚酰胺层 | Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of defined flammability, copper clad (IEC 61249-2-12:1999) |
| EN 61249-2-13-1999 | 印制板和其它互连结构材料 第2-13部分：包被和非包被增强基材分规范集 阻燃性铜包被的非编织芳香聚酰胺层 | Materials for printed boards and other interconnecting structures - Part 2-13: Sectional specification set for reinforced base materials, clad and unclad - Cyanate ester non-woven aramid laminate of defined flammability, copper clad (IEC 61249-2-13:1999) |
| EN ISO 10304-3-1997 | 水质 离子色谱法测定溶解性阴离子 第3部分：铬酸盐、碘化物、亚硫酸盐、硫氰酸盐和硫代硫酸酯的测定 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate (ISO 10304-3:1997) |
| EN ISO 105-X14-1997 | 纺织品 色牢度试验 第X14部分：耐羊毛酸性氯化色牢度：二氯异氰尿酸钠 | Textiles - Tests for colour fastness - Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate (ISO 105-X14:1994) |
| EN ISO 11909-1998 | 色漆和清漆用粘合剂 聚异氰酸酯树脂 一般试验法 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:1996) |
| EN ISO 14403-2002 | 水质 用连续流量分析法测定总氰化物和游氰化物含量 | Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002) |
| EN ISO 14896-2001 | 塑料 聚氨酯原材料 异氰酸酯的测定 | Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2000) |
| EN ISO 4614-1999 | 塑料 三聚氰胺－甲醛模塑件 可萃取的甲醛的测定 | Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde (ISO 4614:1977) |
| ENV 13130-3-1999 | 接触食品的材料和物品 受限塑料物质 第3部分：食物和食物模拟物中氰乙烯测定 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 3: Determination of acrylonitrile in food and food simulants |
| ENV 13130-8-1999 | 接触食品的材料和物品 受限塑料物质 第8部分：塑料中异氰酸盐的测定 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics |
| ENV 13999-4-2002 | 粘合剂 使用后测量低溶剂性或无溶剂粘合剂挥发特性的短期方法 第4部分：挥发性二异氰酸酯的测定 | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 4: Determination of volatile diisocyanates |
| prEN 14308-2002 | 工业装置和建筑设备用热绝缘产品 工厂制硬质聚氨基甲酸乙酯泡沫和聚异氰尿酸酯泡沫产品 规范 | Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification |
| prEN 14322-2001 | 木制面板 室内用三聚氰胺面板 分类、定义和要求 | Wood-based panels - Melamine faced boards for interior uses - Definitions, requirements and classification |
| prEN 14323-2001 | 木制面板 室内用三聚氰胺面板 试验方法和特性 | Wood-based panels - Melamine faced boards for interior uses - Characteristics and test methods |
| prEN 60893-3-3-2003 | 电工用热固性树脂基工业刚性层压板规范 第３部分：专用材料规范 活页３：对三聚氰胺树 脂硬质层压片的要 | IEC 60893-3-3, Ed. 2: Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials; Requirements for rigid laminated sheets based on melamine resins / N |
| 编号 | 中文名称 | 英文名称 |