| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 60050-716-1-1995 | 国际电工词汇 第716-1章:综合业务数字网(ISDN) 第1部分:一般情况 | International Electrotechnical Vocabulary - Chapter 716-1: Integrated Services Digital Network (ISDN) - Part 1: General aspects |
| IEC 60050-807-1998 | 国际电工词汇 第807部分:音频信号和视频信号的数字录制 | International Electrotechnical Vocabulary - Part 807: Digital recording of audio and video signals |
| IEC 60107-5 AMD 1-1999 | 电视广播传输接收机的推荐测量方法 第5部分:使用NICAM双声道数字音频系统对多声道电视接收机的电气测量 修 | Recommended methods of measurement on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system; Amendment 1 |
| IEC 60107-5 Edition 1.1-1999 | 电视广播接收机的推荐测量方法.第5部分:使用NICAM双声道数字音频系统多声道电视接收机的电气性能测量 | Recommended methods of measurements on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system |
| IEC 60107-5-1992 | 电视广播传输接收机的推荐测量方法 第5部分:使用NICAM双声道数字音频系统对多声道电视接收机的电气测量 | Recommended methods of measurement on receivers for television broadcast transmissions; part 5: electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system |
| IEC 60118-14-1998 | 助听器 第14部分:数字接口装置的规范 | Hearing aids - Part 14: Specification of a digital interface device |
| IEC 60446-2007 | 人机界面、标志和标识的基本原则和安全原则.用颜色或字母数字来标识导体 | Basic and safety principles for man-machine interface, marking and identification - Identification of conductors by colours or alphanumerics |
| IEC 60488-1-2004 | 可编程序设备的标准数字接口高效协议.第1部分:总则 | Higher performance protocol for the standard digital interface for programmable instrumentation - Part 1: General |
| IEC 60488-2-2004 | 可编程序设备的标准数字接口.第2部分:代码、格式、协议和通用命令 | Standard digital interface for programmable instrumentation - Part 2: Codes, formats, protocols and common commands |
| IEC 60688 AMD 1-1997 | 将交流电量转换成模拟信号或数字信号用的电测量变送器 修改1 | Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals; Amendment 1 |
| IEC 60688 AMD 2-2001 | 将交流电量转换成模拟信号或数字信号用的电测量变送器 修改2 | Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals; Amendment 2 |
| IEC 60688 Edition 2.2-2002 | 交流电量转换成模拟信号或数字信号的电测量变换器 | Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals |
| IEC 60688-1992 | 将交流电量转换成模拟信号或数字信号用的电测量变送器 | Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals |
| IEC 60728-9 AMD 1-2005 | 电视和声音信号用电缆分配系统.第9部分:数字调制信号用电缆分配系统的接口.修改件1 | Cabled distribution systems for television and sound signals - Part 9: Interfaces of cabled distribution systems for digitally modulated signals; Amendment 1 |
| IEC 60728-9-2000 | 电视和声音信号用电缆分配系统 第9部分:数字调制信号用电缆分配系统的接口 | Cabled distribution systems for television and sound signals - Part 9: Interfaces of cabled distribution systems for digitally modulated signals |
| IEC 60739-1983 | 数字式计数率表 特性和试验方法 | Digital counting ratemeters. Characteristics and test methods |
| IEC 60748-2-1-1991 | 半导体器件 集成电路 第2部分:数字集成电路 第1节:双极单片数字集成门电路(不包括自由逻辑阵列) | Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section 1: blank detail specification for bipolar monolithic digital integrated circuits gates (excluding uncommitted logic arrays) |
| IEC 60748-2-10-1994 | 半导体器件 集成电路 第2部分:数字集成电路 第10节:集成电路动态读/写存储器空白详细规范 | Semiconductor devices - Integrated circuits - Part 2: Digital integrated circuits; section 10: Blank detail specification for integrated circuit dynamic read/write memories |
| IEC 60748-2-11-1999 | 半导体器件 集成电路 第2-11部分:数字集成电路 单电集成电路可擦、可编程、只读存储器集成电路空白详细规范 | Semiconductor devices - Integrated circuits - Part 2-11: Digital integrated circuits - Blank detail specification for single supply integrated circuit, electrically erasable, and programmable read-only memory |
| IEC 60748-2-12-2001 | 半导体器件 集成电路 第2-12部分：数字集成电路 可编程逻辑器件（PLDs）空白详细规范 | Semiconductor devices - Integrated circuits - Part 2-12: Digital integrated circuits; Blank detail specification for programmable logic devices (PLDs) |
| IEC 60748-2-1997 | 半导体器件 集成电路 第2部分:数字集成电路 | Semiconductor devices - Integrated circuits - Part 2: Digital integrated circuits |
| IEC 60748-2-2 AMD 1-1994 | 半导体器件 集成电路 第2部分:数字集成电路 第2节:HCMOS数字集成电路(54/74HC、54/74HCT、54/74HCU系列)族 | Semiconductor devices - Integrated circuits - Part 2: Digital integrated circuits - Section 2: Family specification for HCMOS digital integrated circuits, series 54/74 HC, 54/74 HCT, 54/74 HCU; Amendment 1 |
| IEC 60748-2-2-1992 | 半导体器件 集成电路 第2部分:数字集成电路 第2节:HCMOS数字集成电路(54/74HC、54/74HCT、54/74HCU系列)族 | Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section 2: familiy specification for HCMOS digital integrated circuits, series 54/74 HC, 54/74 HCT, 54/74 HCU |
| IEC 60748-2-20-2000 | 半导体器件 集成电路 第2-20部分:数字集成电路 族规范 低压集成电路 | Semicondutor devices - Integrated circuits - Part 2-20: Digital integrated circuits; Family specifications: Low voltage integrated circuits |
| IEC 60748-2-3-1992 | 半导体器件 集成电路 第2部分:数字集成电路 第3节:HCMOS数字集成电路(54/74HC、54/74HCT、54/74HCU系列)空 | Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section 3: blank detail specification for HCMOS digital integrated circuits (series 54/74 HC, 54/74 HCT, 54/74 HCU) |
| IEC 60748-2-4-1992 | 半导体器件 集成电路 第2部分:数字集成电路 第4节:MOS数字集成电路族规范,4000B和4000UB系列 | Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section four: family specification for complementary MOS digital integrated circuits; series 4000 B and 4000 UB |
| IEC 60748-2-5-1992 | 半导体器件 集成电路 第2部分:数字集成电路 第5节:MOS数字集成电路(4000B和4000UB系列)空白详细规范 | Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section five: blank detail specification for complementary MOS digital integrated circuits; series 4000 B and 4000 UB |
| IEC 60748-2-6-1992 | 半导体器件 集成电路 第2部分:数字集成电路 第6节:微处理器集成电路空白详细规范 | Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section six: blank detail specification for microprocessor integrated circuits |
| IEC 60748-2-7-1992 | 半导体器件 集成电路 第2部分:数字集成电路 第7节:熔丝式可编程双极只读存储器集成电路空白详细规范 | Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section 7: blank detail specification for integrated circuit fusible-link programmable bipolar read-only memories |
| IEC 60748-2-8-1993 | 半导体器件 集成电路 第2部分:数字集成电路 第8节:静态读/写存储器集成电路空白详细规范 | Semiconductor devices; integrated circuits; part 2: digital integrated circuits; section 8: blank detail specification for integrated circuit static read/write memories |
| IEC 60748-2-9-1994 | 半导体器件 集成电路 第2部分:数字集成电路 第9节:MOS紫外线擦除可编程只读存储器空白详细规范 | Semiconductor devices - Integrated circuits - Part 2: Digital integrated circuits; section 9: Blank detail specification for MOS ultraviolet light erasable electrically programmable read-only memories |
| IEC 60748-4-1-1993 | 半导体器件 集成电路 第4部分:接口集成电路 第1节:线性数字/模拟转换器空白详细规范 | Semiconductor devices; integrated circuits; part 4: interface integrated circuits; section 1: blank detail specification for linear digital-to-analogue converters (DAC) |
| IEC 60748-4-2-1993 | 半导体器件.集成电路.第4部分:接口集成电路.第2节:线性模拟-数字转换器空白详细规范 | Semiconductor devices; integrated circuits; Part 4: interface integrated circuits; section 2: blank detail specification for linear analogue-to-digital converters (ADC) |
| IEC 60748-4-3-2006 | 半导体器件.集成电路.第4-3部分:接口集成电路.模拟/数字转换器(ADC)的动力学标准 | Semiconductor devices - Integrated circuits - Part 4-3: Interface integrated circuits - Dynamic criteria for analogue-digital converters (ADC) |
| IEC 60835-1-1-1990 | 数字微波无线电传输系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第1节:总则 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section one: general |
| IEC 60835-1-2 AMD 1-1995 | 数字微波无线电传输系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第2节:基本 | Methods of measurement for equipment used in digital microwave transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 2: Basic characteristics; Amendment 1 |
| IEC 60835-1-2-1992 | 数字微波无线电传输系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第2节:基本 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section 2: basic characteristics |
| IEC 60835-1-3 AMD 1-1995 | 数字微波无线电传榆系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第3节:传输 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 3: Transmission characteristics; Amendment 1 |
| IEC 60835-1-3-1992 | 数字微波无线电传输系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第3节:传输 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section 3: transmission characteristics |
| IEC 60835-1-4 AMD 1-1995 | 数字微波无线电传输系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第4节:传输 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 4: Transmission performance; Amendment 1 |
| IEC 60835-1-4-1992 | 数字微波无线电传输系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第4节:传输 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section 4: transmission performance |
| IEC 60835-2-1-1990 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第1节:总则 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section one: general |
| IEC 60835-2-10-1992 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第10节:系统总性能 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 10: overall system performance |
| IEC 60835-2-11-1996 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第11节:交叉极化干扰消除器 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 11: Cross-polarization interference canceller |
| IEC 60835-2-2-1994 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第2节:天线 | Methods of measurement for equipment used in digital microwave transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 2: Antenna |
| IEC 60835-2-3-1992 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第3节:RF分支网络 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 3: RF branching networks |
| IEC 60835-2-4 AMD 1-1997 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第4节:发射机/接收机包括调 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 4: Transmitter/receiver including modulator/demodulator; Amendment 1 |
| IEC 60835-2-4 Edition 1.1-1998 | 数字微波无线电传输系统使用设备的测量方法.第2-4部分:地面无线电中继系统的测量.包括调制器/解调器的发射 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2-4: Measurements on terrestrial radio-relay systems; Transmitter/receiver including modulator/demodulator |
| IEC 60835-2-4-1993 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第4节:发射机/接收机包括调 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 4: transmitter/receiver including modulator/demodulator |
| IEC 60835-2-5-1993 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第5节:数字信号处理子系统 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 5: digital signal processing sub-system |
| IEC 60835-2-6-1995 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第6节:保护开关 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 6: Protection switching |
| IEC 60835-2-7-1994 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第7节:分集转换和联合设备 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 7: Diversity switching and combining equipment |
| IEC 60835-2-8 AMD 1-1996 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第8节:自适应均衡器 修改1 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 8: Adaptive equalizer; Amendment 1 |
| IEC 60835-2-8-1993 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第8节:自适应均衡器 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 8: adaptive equalizer |
| IEC 60835-2-9-1995 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第9节:业务信道 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 9: Service channels |
| IEC 60835-3-1-1990 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第1节:总则 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section one: general |
| IEC 60835-3-10-1994 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第10节:终端设备-TDMA地面站话务量 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 10: Terminal equipment - TDMA traffic earth station |
| IEC 60835-3-11-1995 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第11节:SCPC-PSK传输业务信道设备 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 11: Service channel equipment for SCPC-PSK transmission |
| IEC 60835-3-12-1993 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第12节:系统总性能 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section 12: overall system performance |
| IEC 60835-3-13-1996 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第13节:VSAT系统 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 13: VSAT systems |
| IEC 60835-3-14-1996 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第14节:卫星新闻收集用地面站(SNG) | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 14: Earth stations for satellite news gathering (SNG) |
| IEC 60835-3-2-1995 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第2节:天线 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 2: Antenna |
| IEC 60835-3-4-1993 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第4节:低噪声放大器 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section 4: low noise amplifier |
| IEC 60835-3-5-1994 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第5节:上、下变频器 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurement on satellite earth stations - Section 5: Up- and down-converters |
| IEC 60835-3-6-1996 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第6节:大功率放大器 | Methods of measurement for equipment used in digital microwave transmission systems - Part 3: Measurements on satellite earth stations - Section 6: High-power amplifiers |
| IEC 60835-3-7-1995 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第7节:接收系统的品质因数 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 7: Figure-of-merit of receiving system |
| IEC 60835-3-9-1993 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第9节:SCP-PSK终端设备 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section 9: terminal equipment SCP-PSK |
| IEC 60839-5-5-1991 | 报警系统 第5部分:报警传输系统的要求 第5节:利用公用电话交换网络的数字发信机系统的要求 | Alarm systems; part 5: requirements for alarm transmission systems; section 5: requirements for digital communicator systems using the public switched telephone network |
| IEC 60839-7-11-2001 | 报警系统 第7-11部分：报警传输系统中串行数据接口用报文格式和协议 使用ITU-T建议V.23在与PSTN接口处的 | Alarm systems - Part 7-11: Message formats and protocols for serial data interfaces in alarm transmission systems; Serial protocol for use by digital communicator systems using ITU-T Recommendation V.23 signalling at interfaces with the PSTN |
| IEC 60908-1999 | 音频记录 压缩磁盘数字音频系统 | Audio recording - Compact disc digital audio system |
| IEC 60948-1988 | 家庭电子系统(HES)的数字键盘(HES) | Numeric keyboard for home electronic systems (HES) |
| IEC 60958-1-2004 | 数字音频接口.第1部分:总则 | Digital audio interface - Part 1: General |
| IEC 60958-3-2006 | 数字音频接口.第3部分:消费类用途 | Digital audio interface - Part 3: Consumer applications |
| IEC 60958-4-2003 | 数字音频接口.第4部分:专业类用途(TA 4) | Digital audio interface - Part 4: Professional applications (TA 4) |
| IEC 61016 AMD 1-1999 | 使用19mm磁带(D-1格式)的螺旋扫描数字化器件盒式录像带录像系统 修改1 | Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1); Amendment 1 |
| IEC 61016-1989 | 使用19mm磁带(D-1格式)的螺旋扫描数字化器件盒式录像带录像系统 | Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1) |
| IEC 61076-2-1998 | 直流低频模拟及数字高速数据应用系统用连接器 第2部分:有质量评定的圆形连接器 分规范 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 2: Circular connectors with assessed quality - Sectional specification |
| IEC 61076-3-001-1999 | 直流低频模拟及数字高速数据应用系统用连接器 第3-001部分:有质量评定的矩形连接器 空白详细规范 | Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3-001: Rectangular connectors with assessed quality - Blank detail specification |
| IEC 61076-3-100-1999 | 直流低频模拟及数字高速数据应用系统用连接器 第3-100部分:有质量评定的矩形连接器 带有1.27mm双排不可拆卸 | Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
| IEC 61076-3-101-1997 | 有质量评定的直流低频模拟及数字高速数据应用系统用连接器 第3部分:矩形连接器 第101节:在1.27mm×2.54mm中 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm × 2,54 mm centre-line |
| IEC 61076-3-1999 | 直流低频模拟及数字高速数据应用系统用连接器 第3部分:有质量评定的矩形连接器 分规范 | Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3: Rectangular connectors with assessed quality - Sectional specification |
| IEC 61076-4-001-1996 | 有质量评定的直流低频模拟及数字高速数据应用系统用连接器 第4部分:印制板连接器 第001节:空白详细规范 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification |
| IEC 61076-4-102-1997 | 有质量评定的直流低频模拟及数字高速数据应用系统用连接器 第4部分:印制板连接器 第102节:符合IEC 60917的 | Connectors with assessed quality for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
| IEC 61076-4-103-1999 | 直流低频模拟及数字高速数据应用系统用连接器 第4部分:有质量评定的印制板连接器 第103节:具有屏蔽罩及基本 | Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm |
| IEC 61076-4-104-1999 | 直流低频模拟及数字高速数据应用系统用连接器 第4-104部分:有质量评定的印制板连接器 基本网格为2.0mm、接 | Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on an multiple grid of 0,5 mm |
| IEC 61076-4-105-1995 | 有质量评定的直流低频模拟及数字高速数据应用系统用连接器 第4部分:印制板连接器 第105节:供包括通信和音响 | Connectors with assessed quality for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed boards connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry |
| IEC 61076-4-1995 | 有质量评定的直流低频模拟及数字高速数据应用系统用连接器 第4部分:分规范 印制板连接器 | Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors |
| IEC 61076-5-2001 | 直流低频模拟及数字高速数据应用系统用连接器 第5部分：经质量评定的成列插座 分规范 | Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 5: In-line sockets with assessed quality; Sectional specification |
| IEC 61076-7-2000 | 直流低频模拟及数字高速数据应用系统用连接器 第7部分:具有质量评定的包括鉴定和能力批准的电缆引出端附件 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification |
| IEC 61079-4-1993 | 12GHz频带卫星广播传输接收机的测量方法 第4部分:NTSC制式数字副载波系统的声音/数据解码器装置的电气测量 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 4: electrical measurements on sound/data decoder units for the digital subcarrier NTSC system |
| IEC 61083-2-1996 | 高压冲击试验中测量用数字记录仪 第2部分:测定冲击波形参数用软件的评估 | Digital recorders for measurements in high-voltage tests - Part 2: Evaluation of software used for the determination of the parameters of impulse waveforms |
| IEC 61096 AMD 1-1996 | 数字音频激光唱盘重放设备特性的测量方法 修改1 | Methods of measuring the characteristics of reproducing equipment for digital audio compact discs; Amendment 1 |
| IEC 61096-1992 | 数字音频激光唱盘重放设备特性的测量方法 | Methods of measuring the characteristics of reproducing equipment for digital audio compact discs |
| IEC 61097-3-1994 | 全球海上遇险和安全系统(GMDSS) 第3部分:数字选择呼叫(DSC)设备 操作和性能要求、测试方法和要求的测试结果 | Global maritime distress and safety system (GMDSS) - Part 3: Digital selective calling (DSC) equipment - Operational and performance requirements, methods of testing and required testing results |
| IEC 61097-8-1998 | 全球海上遇险和安全系统(GMDSS) 第8部分:海上中频、中高频和甚高频频带中数字选择呼叫(DSC)的船用监控接收 | Global maritime distress and safety system (GMDSS) - Part 8: Shipborne watchkeeping receivers for the reception of digital selective calling (DSC) in the maritime MF, MF/HF and VHF bands - Operational and performance requirements, methods of testing and required test results |
| IEC 61097-9-1997 | 全球海上遇险和安全系统(GMDSS) 第9部分:海上呼叫用电话、数字选择呼叫设备(DSC)和窄带直接打印设备(NBOP) | Global maritime distress and safety system (GMDSS) - Part 9: Shipborne transmitters and receivers for use in the MF and HF bands suitable for telephony, digital selective calling (DSC) and narrow band direct printing (NBDP) - Operational and performance requirements, methods of testing and required test results |
| IEC 61119-1-1992 | 数字音频盒式磁带系统(DAT) 第1部分:尺寸和特性 | Digital Audio Tape cassette system (DAT); part 1: dimensions and characteristics |
| IEC 61119-2-1991 | 数字音频盒式磁带系统(DAT) 第2部分:DAT校准带 | Digital audio tape cassette system; part 2: DAT calibration tape |
| IEC 61119-3-1992 | 数字音频盒式磁带系统(DAT) 第3部分:DAT磁带性能 | Digital Audio Tape cassette system (DAT); part 3: DAT tape properties |
| IEC 61119-5-1993 | 数字音频盒式磁带系统(DAT) 第5部分:专业用数字音频盒式磁带系统(DAT) | Digital audio tape cassette system (DAT); part 5: DAT for professional use |
| IEC 61119-6-1992 | 数字音频盒式磁带系统(DAT) 第6部分:系列复制管理系统 | Digital audio tape cassette system (DAT); part 6: serial copy management system |
| IEC 61120-1-1991 | 专业用6.3mm磁带的数字音频盘式磁带录音系统 第1部分:一般要求 | Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use; part 1: general requirements |
| IEC 61120-2-1991 | 专业用6.3mm磁带的数字音频盘式磁带录音系统 第2部分:格式A | Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use; part 2: format A |
| IEC 61120-3-1991 | 专业用6.3mm磁带的数字音频盘式磁带录音系统 第3部分:格式B | Digital audio tape recorder reel to reel system, using 6,3 mm magnetic tape, for professional use; part 3: format B |
| IEC 61120-4-1992 | 专业用6.3mm磁带的数字音频盘式磁带录音系统 第4部分:磁带性能:定义和测量方法 | Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use; part 4: magnetic tape properties; definitions and methods of measurement |
| IEC 61120-5-1995 | 专业用6.3mm磁带的数字音频盘式磁带录音系统 第5部分:带盘 | Digital audio tape recorder, reel-to-reel system, using 6,3 mm magnetic tape, for professional use - Part 5: Reels |
| IEC 61156-1-1-2001 | 数字通信用对绞或星绞多芯对称电缆 第1-1部分：能力批准 总规范 | Multicore and symmetrical pair/quad cables for digital communications - Part 1-1: Capability approval; Generic specification |
| IEC 61156-1-2007 | 数字通信用对绞或星绞多芯对称电缆.第1部分:总规范 | Multicore and symmetrical pair/quad cables for digital communication - Part 1: Generic specification |
| IEC 61156-2-1-2003 | 数字通信用对绞或星绞多芯对称电缆.第2-1部分:水平平面布线.空白详细规范 | Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring; Blank detail specification |
| IEC 61156-2-2-2001 | 数字通信用对绞或星绞多芯对称电缆 第2-2部分：水平层布线电缆 能力批准 分规范 | Multicore and symmetrical pair/quad cables for digital communications - Part 2-2: Horizontal floor wiring; Capability approval; Sectional specification |
| IEC 61156-2-2003 | 数字通信用对绞或星绞多芯对称电缆.第2部分:水平平面布线.分规范 | Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floor wiring; Sectional specification |
| IEC 61156-3-1-2003 | 数字通信用对绞或星绞多芯对称电缆.第3-1部分:工作区布线电缆.空白详细规范 | Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work area wiring; Blank detail specification |
| IEC 61156-3-2-2001 | 数字通信用对绞或星绞多芯对称电缆 第3-2部分：工作区布线电缆 能力批准 分规范 | Multicore and symmetrical pair/quad cables for digital communications - Part 3-2: Work area wiring; Capability approval; Sectional specification |
| IEC 61156-3-2003 | 数字通信用对绞或星绞多芯对称电缆.第3部分:工作区布线电缆.分规范 | Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring; Sectional specification |
| IEC 61156-4-1-2003 | 数字通信用对绞或星绞多芯对称电缆.第4-1部分:垂直布线.空白详细规范.修改件1 | Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables; Blank detail specification |
| IEC 61156-4-2-2001 | 数字通信用对绞或星绞多芯对称电缆 第4-2部分：垂直布线电缆 能力批准 分规范 | Multicore and symmetrical pair/quad cables for digital communications - Part 4-2: Riser cables; Capability approval; Sectional specification |
| IEC 61156-4-2003 | 数字通信用对绞或星绞多芯对称电缆.第4部分:引上电缆.分规范 | Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables; Sectional specification |
| IEC 61156-5-1-2007 | 数字通信用对绞或星绞多芯对称电缆.第5-1部分:传输特性＜1000MHz的星绞多芯对称电缆.水平层布线.空白详细规 | Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 1000 MHz - Horizontal floor wiring - Blank detail specification |
| IEC 61156-5-2-2002 | 数字通信用对绞/星绞多芯和对称电缆.第5-2部分:不高于600MHz的有传输特性的对绞/星绞对称电缆.水平地板布线 | Multicore and symmetrical pair/quad cables for digital communications - Part 5-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring; Capability approval; Sectional specification |
| IEC 61156-5-2002 | 数字通信用对绞/星绞多芯和对称电缆.第5部分:不高于600MHz的有传输特性的对绞/星绞对称电缆.水平地板布线. | Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Horizontal floor wiring; Sectional specification |
| IEC 61156-6-1-2007 | 数字通信用对绞或星绞多芯对称电缆.第6-1部分:传输特性＜1000MHz的星绞多芯对称电缆.工作区布线.空白详细规 | Multicore and symmetrical pair/quad cables for digital communications - Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 1000 MHz - Work area wiring - Blank detail specification |
| IEC 61156-6-2-2002 | 数字通信用对绞/星绞多芯和对称电缆.第6-2部分:不高于600MHz的有传输特性的对绞/星绞对称电缆.工作场所布线 | Multicore and symmetrical pair/quad cables for digital communications - Part 6-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz; Work area wiring; Capability approval; Sectional specification |
| IEC 61156-6-2007 | 数字通信用对绞或星绞多芯对称电缆.第6部分:传输特性＜600MHz的对绞或星绞对称电缆.工作区域布线.分规范 | Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Work area wiring - Sectional specification |
| IEC 61156-7-1-2003 | 数字通信用对绞/星绞多芯对称电缆.第7-1部分:1200MHz及以下传输特性的对绞对称电缆.数字和模拟通信电缆的空 | Multicore and symmetrical pair/quad cables for digital communications - Part 7-1: Symmetrical pair cables with transmission characteristics up to 1200 MHz; Blank detail specification for digital and analog communication cables |
| IEC 61156-7-2-2003 | 数字通信用对绞/星绞多芯对称电缆.第7-2部分:1200MHz及以下传输特性的对绞对称电缆.质量评定程序.数字和模 | Multicore and symmetrical pair/quad cables for digital communications - Part 7-2: Symmetrical pair cables with transmission characteristics up to 1200 MHz; Quality assessment procedure; Sectional specification for digital and analog communication cables |
| IEC 61156-7-2003 | 数字通信用对绞/星绞多芯对称电缆.第7部分:1200MHz及以下传输特性的对绞对称电缆.数字和模拟通信电缆的分规 | Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1200 MHz; Sectional specification for digital and analog communication cables |
| IEC 61158-2 Corrigendum 1-2004 | 勘误1.测量和控制用数字数据通信.工业控制系统用现场总线.第2部分:物理层规范和服务定义 | Corrigendum 1 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification and service definition |
| IEC 61158-2-2003 | 测量和控制用数字数据通信.工业控制系统用现场总线.弟2部分:物理层规范和服务定义 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification and service definition |
| IEC 61158-3-2003 | 测量和控制用数字数据通信.工业控制系统用现场总线.第3部分:数据链路服务定义 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link service definition |
| IEC 61158-4 Corrigendum 1-2004 | 勘误1.测量和控制用数字数据通信.工业控制系统用现场总线.第4部分:数据链路协议规范 | Corrigendum 1 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification |
| IEC 61158-4-2003 | 测量和控制用数字数据通信.工业控制系统用现场总线.第4部分:数据链路协议规范 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification |
| IEC 61158-5 Corrigendum 1-2004 | 勘误1.测量和控制用数字数据通信.工业控制系统用现场总线.第5部分:应用层服务定义 | Corrigendum 1 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition |
| IEC 61158-5-2003 | 测量和控制用数字数据通信.工业控制系统用现场总线.第5部分:应用层服务定义 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition |
| IEC 61158-6 Corrigendum 1-2004 | 勘误1.测量和控制用数字数据通信.工业控制系统用现场总线.第6部分:应用层协议规范 | Corrigendum 1 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification |
| IEC 61158-6-2003 | 测量和控制用数字数据通信.工业控制系统用现场总线.第6部分:应用层协议规范 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification |
| IEC 61162-1-2007 | 海上导航和无线电通信设备和系统.数字接口.第1部分:单通话器和多受话器 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners |
| IEC 61162-2-1998 | 海上导航和无线电通信设备及系统 数字接口 第2部分:单通话器和多受话器,高速传输 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission |
| IEC 61162-400-2001 | 海上导航和无线电通信设备及系统 数字接口 第400部分：多通话器和多受话器 船舶系统互连 导言和一般原 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 400: Multiple talkers and multiple listeners; Ship systems interconnection; Introduction and general principles |
| IEC 61162-401-2001 | 海上导航和无线电通信设备及系统 数字接口 第401部分：多通话器和多受话器 船舶系统互连 应用文件集 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 401: Multiple talkers and multiple listeners; Ship systems interconnection; Application profile |
| IEC 61162-402-2005 | 海上导航和无线电通信设备及系统.数字接口.第402部分:多通话器和多受话器.船舶系统互连.文献和试验要求 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 402: Multiple talkers and multiple listeners - Ship systems interconnection - Documentation and test requirements |
| IEC 61162-410-2001 | 海上导航和无线电通信设备及系统 数字接口 第410部分：多通话器和多受话器 船舶系统互连 运输文件集要 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 410: Multiple talkers and multiple listeners; Ship systems interconnection; Transport profile requirements and basic transport profile |
| IEC 61162-420-2001 | 海上导航和无线电通信设备及系统 数字接口 第420部分：多通话器和多受话器 船舶系统互连 围罩梯口标准 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 420: Multiple talkers and multiple listeners; Ship systems interconnection; Companion standard requirements and basic companion standards |
| IEC 61179-1993 | 使用D2(NTSC、PAL、PAL-M)格式19mm磁带的螺旋扫描复合盒式数字录像系统 | Helical-scan digital composite video cassette recording system using 19 mm magnetic tape, format D2 (NTSC, PAL, PAL-M) |
| IEC 61182-1-1994 | 印制电路板 电子数据描述和转换 第1部分:印制板数字格式描述 | Printed boards - Electronic data description and transfer - Part 1: Printed board description in digital form |
| IEC 61182-7 Corrigendum 1-2002 | 印制电路板.电子数据描述和转换.第7部分:裸板数字格式电气试验信息 | Printed boards - Electronic data description and transfer - Part 7: Bare board electric test information in digital form |
| IEC 61182-7-1995 | 印制电路板 电子数据描述和转换 第7部分:裸板数字格式电气试验信息 | Printed boards - Electronic data description and transfer - Part 7: Bare board electric test information in digital form |
| IEC 61196-3-1-1995 | 射频电缆 第3部分:水平层布线数字通信用同轴电缆 第1节:有效半径达到500m、速率10 Mb/s及以下的电缆详细规 | Radio-frequency cables - Part 3: Coaxial cables for digital communication in horizontal floor wiring - Section 1: Detail specification for cables of 500 m reach and up to 10 Mb/s |
| IEC 61196-3-2-1997 | 射频电缆 第3-2部分:水平层布线数字通信用同轴电缆 有效半径达到185m、速率10Mb/s以下的局域网用实心介质同 | Radio-frequency cables - Part 3-2: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks of 185 m reach and up to 10 Mb/s |
| IEC 61196-3-3-1997 | 射频电缆 第3-3部分:水平层布线数字通信用同轴电缆 有效半径达到185m、速率10Mb/s以下的局域网用泡沫介质同 | Radio-frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s |
| IEC 61223-3-3-1996 | 医用成像部门的评价及例行试验 第3-3部分:验收试验 数字减影血管造影X射线设备图像性能 | Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiography (DSA) |
| IEC 61280-2-1-1998 | 纤维光学通信子系统基本试验程序 第2-1部分:数字系统试验程序 接收器灵敏度和过载测量 | Fibre optic communication subsystem basic test procedures - Part 2-1: Test procedures for digital systems - Receiver sensitivity and overload measurement |
| IEC 61280-2-10-2005 | 纤维光学通信子系统试验程序.第2-10部分:数字系统.激光发射器的时间分辨线性调频脉冲和α指数测量 | Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters |
| IEC 61280-2-11-2006 | 光线通信子系统试验程序.第2-11部分:数字体系.光信号质量监控用采用振幅柱状图评定的平均Q因子的测定 | Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring |
| IEC 61280-2-2-2005 | 纤维光学通信子系统试验程序.第2-2部分:数字系统.光眼图、波形和消光比的测量 | Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform, and extinction ratio measurement |
| IEC 61280-2-4-1998 | 纤维光学通信子系统基本试验程序 第2-4部分:数字系统试验程序 比特率容差测量 | Fibre optic communication subsystem basic test procedures - Part 2-4: Test procedures for digital systems - Bit-rate tolerance measurement |
| IEC 61280-2-5-1998 | 纤维光学通信子系统基本试验程序 第2-5部分:数字系统试验程序 抖动转移功能测量 | Fibre optic communication subsystem basic test procedures - Part 2-5: Test procedures for digital systems - Jitter transfer function measurement |
| IEC 61280-2-8-2003 | 光纤通信子系统基本试验过程.数字系统.第2-8部分:用品质因数测量法测定低位错率 | Fibre optic communication subsystem test procedures - Digital systems - Part 2-8: Determination of low BER using Q-factor measurements |
| IEC 61280-2-9-2002 | 光纤通信子系统试验程序.第2-9部分:密集波长的区分多层系统用光信号对噪音比率测量的数字系统 | Fibre optic communication subsystem test procedures - Part 2-9: Digital systems; Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems |
| IEC 61290-3-1-2003 | 光学放大器.试验方法.第3-1部分:噪音数字参数.光谱分析仪法 | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters; Optical spectrum analyzer method |
| IEC 61290-3-2-2003 | 光学放大器.第3-2部分:噪音数字参数的试验方法.电频谱分析仪法 | Optical amplifiers - Part 3-2: Test methods for noise figure parameters; Electrical spectrum analyzer method |
| IEC 61290-3-2000 | 光学纤维放大器 基础规范 第3部分:噪音数字参数的的测量方法 | Optical fibre amplifiers - Basic specification - Part 3: Test methods for noise figure parameters |
| IEC 61291-2-2007 | 光纤放大器.第2部分:数字应用.性能规范模板 | Optical amplifiers - Part 2: Digital applications - Performance specification template |
| IEC 61327-1995 | 使用12.65mm(0.5 in)磁带的螺旋扫描数字复合盒式录像系统 D-3格式 | Helical-scan digital composite video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format D-3 |
| IEC 61595-1-1997 | 专业用多路数字声频磁带记录器(DATR)系统 第1部分:A格式 | Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use - Part 1: Format A |
| IEC 61595-2-1997 | 专业用多路数字声频磁带记录器(DATR)系统 第2部分:B格式 | Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use - Part 2: Format B |
| IEC 61595-3-1999 | 专业用多路数字声频磁带记录器(DATR)系统 第3部分:16比特介质的24比特操作 | Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use - Part 3: 24-bit operation for 16-bit media |
| IEC 61603-7-2003 | 采用红外辐射的音频和/或视频及相关信号的传输系统.第7部分:会议及类似用途的数字音频信号传输系统 | Transmission systems of audio and/or video and related signals using infrared radiation - Part 7: Transmission systems for digital audio signals for conference and similar applications |
| IEC 61603-8-1-2003 | 采用红外辐射的音频和/或视频及相关信号的传输.第8-1部分:数字音频和相关信号 | Transmission of audio and/or video and related signals using infrared radiation - Part 8-1: Digital audio and related signals |
| IEC 61606-1-2003 | 音频和视听设备.数字音频部分.音频特性的基本测量方法.第1部分:总则 | Audio and audiovisual equipment - Digital audio parts; Basic measurement methods of audio characteristics - Part 1: General |
| IEC 61606-2-2003 | 音频和视听设备.数字音频部分.音频特性的基本测量方法.第2部分:消费者用 | Audio and audiovisual equipment - Digital audio parts; Basic measurement methods of audio characteristics - Part 2: Consumer use |
| IEC 61606-4-2005 | 音频和视听设备.数字音频部分.音频特性的基本测量方法.第4部分:个人电脑 | Audio and audiovisual equipment - Digital audio parts - Basic measurements methods of audio characteristics - Part 4: Personal computer |
| IEC 61784-1 Corrigendum 1-2004 | 勘误1.测量和控制用数字数据通信.第1部分:与工业控制系统用现场总线相关的连续和不连续制造用轮廓图集 | Corrigendum 1 - Digital data communications for measurement and control - Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems |
| IEC 61784-1-2003 | 测量和控制用数字数据通信.第1部分:与工业控制系统用总线相关的连续和不连续制造用线型控制装置 | Digital data communications for measurement and control - Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems |
| IEC 61834-1 AMD 1-2001 | 录音 用户用(525-60、625-50、1125-60和1250-50系统)6.35mm磁带的螺旋扫描数字视频盒式录音系统 第1部分: | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 1: General specifications; Amendment 1 |
| IEC 61834-1 Edition 1.1-2001 | 录音.消费者使用的(525-60、625-50、1125-60和1250-50系统)使用6.35mm磁带的螺旋扫描数字视频盒式录音系统. | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 1: General specifications |
| IEC 61834-1-1998 | 录音.为用户使用的(525-60.625-50,1125-60和1250-50系统)用6,35mm磁带的垂直扫描数字视频盒式录音系统.第1 | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 1: General specifications |
| IEC 61834-10 Corrigendum 1-2001 | 录音.用户用(525-60、625-50、1125-60和1250-50系统)6.35mm磁带的螺旋扫描数字视频盒式录音系统.第10部分:D | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 10: DTV format |
| IEC 61834-10-2001 | 录制 消费者用6.35mm磁带的螺旋扫描数字视频盒式录制系统（525-60，625-50，1125-60和1250-50系统） 第10 | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 10: DTV format |
| IEC 61834-2-1998 | 录音 用户用(525-60、625-50、1125-60和1250-50系统)6.35mm磁带的螺旋扫描数字视频盒式录音系统 第2部分:52 | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 2: SD format for 525-60 and 625-50 systems |
| IEC 61834-3-1999 | 录音 用户用(525-60、625-50、1125-60和1250-50系统)6.35mm磁带的螺旋扫描数字视频盒式录音系统 第3部分:11 | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 3: HD format for 1125-60 and 1250-50 systems |
| IEC 61834-4-1998 | 录音 用户用(525-60、625-50、1125-60和1250-50系统)6.35mm磁带的螺旋扫描数字视频盒式录音系统 第4部分:包 | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 4: Pack header table and contents |
| IEC 61834-5-1998 | 录音 用户用(525-60、625-50、1125-60和1250-50系统)6.35mm磁带的螺旋扫描数字视频盒式录音系统 第5部分:特 | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 5: The character information system |
| IEC 61834-6-2000 | 录音 用户用(525-60、625-50、1125-60和1250-50系统)6.35mm磁带的螺旋扫描数字视频盒式录音系统 第6部分:SD | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 6: SDL format |
| IEC 61834-7-2001 | 录制 消费者用6.35mm磁带的螺旋扫描数字视频盒式录制系统（525-60，625-50，1125-60和1250-50系统） 第7 | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 7: EDTV2 format |
| IEC 61834-8-2001 | 录制 消费者用6.35mm磁带的螺旋扫描数字视频盒式录制系统（525-60，625-50，1125-60和1250-50系统） 第8 | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 8: PALplus format for 625-50 systems |
| IEC 61834-9-2001 | 录制 消费者用6.35mm磁带的螺旋扫描数字视频盒式录制系统（525-60，625-50，1125-60和1250-50系统） 第9 | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 9: DVB format |
| IEC 61835-1998 | 使用12.65mm(0.5 in)磁带的螺旋扫描数字视频盒式录音系统 D-5格式 | Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format D-5 |
| IEC 61883-1-2003 | 用户音频/视频设备.数字接口.第1部分:总则 | Consumer audio/video equipment - Digital interface - Part 1: General |
| IEC 61883-2-2004 | 用户音频/视频设备.数字接口.第2部分:SD-DVCR数据传输 | Consumer audio/video equipment - Digital interface - Part 2: SD-DVCR data transmission |
| IEC 61883-3-2004 | 用户音频/视频设备.数字接口.第3部分:HD-DVCR数据传输 | Consumer audio/video equipment - Digital interface - Part 3: HD-DVCR data transmission |
| IEC 61883-4-2004 | 用户音频/视频设备.数字接口.第4部分:MPEG2-TS数据传输 | Consumer audio/video equipment - Digital interface - Part 4: MPEG2-TS data transmission |
| IEC 61883-5-2004 | 用户音频/视频接口.数字接口.第5部分:SDL-DVCR数据传输 | Consumer audio/video equipment - Digital interface - Part 5: SDL-DVCR data transmission |
| IEC 61883-6-2005 | 用户音频/视频设备.数字接口.第6部分:音频和音乐数据传输协议 | Consumer audio/video equipment - Digital interface - Part 6: Audio and music data transmission protocol |
| IEC 61883-7-2003 | 用户音频/视频设备.数字接口.第7部分:ITU-R BO.1294系统B传输 | Consumer audio/video equipment - Digital interface - Part 7: Transmission of ITU-R BO.1294 System B |
| IEC 61937-1-2007 | 数字音频.应用IEC 60958的非线性脉冲编码调制(PCM)音频位流接口.第1部分:总则 | Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 1: General |
| IEC 61937-2 Corrigendum 1-2004 | 数字音频.应用IEC 60958的非线性PCM编码音频位流的接口.第2部分:色同步信息.技术勘误1 | Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 2: Burst-info; Corrigendum 1 |
| IEC 61937-2-2007 | 数字音频.用于IEC 60958的非线性脉冲编码调制(PCM)编码音频位流的接口.第2部分:脉冲串信息 | Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 2: Burst-info |
| IEC 61937-3-2007 | 数字音频.用IEC 60958的非线性PCM编码音频位流的接口.第3部分:符合AC-3格式的非线性PCM位流 | Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 3: Non-linear PCM bitstreams according to the AC-3 and enhanced AC-3 formats |
| IEC 61937-4 Corrigendum 1-2004 | 数字音频.应用IEC 60958的非线性PCM编码音频位流的接口.第4部分:符合MPEG音频格式的非线性PCM比特流.技术勘 | Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 4: Non-linear PCM bitstreams according to the MPEG audio format; Corrigendum 1 |
| IEC 61937-4-2003 | 数字音频.用IEC 60958的非线性PCM编码音频位流的接口.第4部分:符合MPEG音频格式的非线性PCM位流 | Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 4: Non-linear PCM bitstreams according to the MPEG audio format |
| IEC 61937-5-2006 | 数字音频.用于IEC 60958的非线性脉冲编码调制(PCM)编码音频位流的接口.第5部分:依据DTS(数字剧院系统格式) | Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 5: Non-linear PCM bitstreams according to the DTS (Digital Theatre Systems format(s)) |
| IEC 61937-6-2006 | 数字音频.应用IEC 60958的非线性PCM编码音频位流接口.第6部分:符合MPEG-2 AAC格式和MPEG-4 AAC音频格式的非 | Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC-format and MPEG-4 AAC audio formats |
| IEC 61937-7-2004 | 数字音频.使用IEC 60958的非线性脉冲编码调制(PCM)编码音频位流的接口.第7部分:符合ATRAC和ATRAC 2/3 和ATR | Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC 2/3 and ATRAC-X formats |
| IEC 61937-8-2006 | 数字音频.应用IEC 60958的非线性PCM编码音频位流接口.第6部分:符合微软媒体音频专用格式的非线性PCM位流 | Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 8: Non-linear PCM bitstreams according to the windows media audio professional format |
| IEC 61937-9-2007 | 数字音频.适用IEC 60958的非线性脉冲编码调制(PCM)编码音频位流接口.第9部分:根据MAT格式的非线性脉冲编码 | Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 9: Non-linear PCM bitstreams according to the MAT format |
| IEC 61966-9-2003 | 多媒体系统与设备.色彩测量和管理.第9部分:数字照相机 | Multimedia systems and equipment - Colour measurement and management - Part 9: Digital cameras |
| IEC 61987-1-2006 | 工业过程测量和控制.处理设备目录中数据结原理.第1部分:带模拟和数字输出的测量设备 | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output |
| IEC 61993-1-1999 | 海上导航和无线电通信设备及系统 第1部分:用VHF数字选择呼叫(DSC)技术的船用自动转发器系统装置 操作和性能 | Maritime navigation and radiocommunication equipment and systems - Part 1: Shipborne automatic transponder system installation using VHF digital selective calling (DSC) techniques - Operational and performance requirements, methods of testing and required test results |
| IEC 62008-2005 | 数字数据采集系统及相关软件的性能特征和校准方法 | Performance characteristics and calibration methods for digital data acquisition systems and relevant software |
| IEC 62012-1-2004 | 在杂乱信号环境中使用的数字通信用对绞/星绞多芯和对称电缆.第1部分:总规范 | Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification |
| IEC 62028-2002 | 数字电视接收机测量的通用方法 | General methods of measurement for digital television receivers |
| IEC 62055-51-2007 | 电量测量.付费系统.第51部分:标准传输规范(STS).单程数字卡和磁卡令牌载波的物理层协议 | Electricity metering - Payment systems - Part 51: Standard transfer specification (STS) - Physical layer protocol for one-way numeric and magnetic card token carriers |
| IEC 62070-2001 | 广播数字录象机 录制和（或）重放错误状态的辨识方法 | Broadcast digital video tape recorders - Identification method for recording and/or reproduction error status |
| IEC 62071-1-2005 | 使用6.35mm磁带的螺旋扫描压缩数字视频盒式系统.格式D-7.第1部分:VTR规范 | Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 1: VTR specifications |
| IEC 62071-2-2005 | 使用6.35mm磁带螺旋扫描压缩数字视频盒式系统.格式D-7.第2部分:压缩格式 | Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 2: Compression format |
| IEC 62071-3-2005 | 使用6.35mm磁带的螺旋扫描压缩数字视频盒式系统.格式D-7.第3部分:数据流格式 | Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 3: Data stream format |
| IEC 62104-2003 | 数字音频广播(DAB)接收机的特性 | Characteristics of DAB receivers |
| IEC 62105-1999 | 数字音频广播系统 接收机数据接口(RDI)的规范 | Digital audio broadcast system - Specification of the receiver data interface (RDI) |
| IEC 62122-2002 | 消费者使用的数字VTRs的测量方法.电子和机械性能 | Methods of measurement for consumer-use digital VTRs - Electronic and mechanical performances |
| IEC 62141-2005 | 使用12.65mm磁带和联合MPEG-4压缩的螺旋扫描数字视频盒式记录格式.D-16型格式 | Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 compression - Type D-16 Format |
| IEC 62156-2001 | 视频压缩12．65mmD-9型元件格式525/60及625/50（数字S）的数字录象 | Digital video recording with video compression 12,65 mm type D-9 component format 525/60 and 625/50 (DIGITAL S) |
| IEC 62216-1-2001 | DVB T系统用数字地面电视接收机 第1部分：基线接收机规范 | Digital terrestrial television receivers for the DVB-T system - Part 1: Baseline receiver specification |
| IEC 62220-1-2-2007 | 医疗电气设备.数字X射线成像装置的特性.第1-2部分:侦探量子效率的测定.X射线测定法用探测器 | Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-2: Determination of the detective quantum efficiency - Detectors used in mammography |
| IEC 62220-1-2003 | 医学电气设备.数字X光成像设备特性.第1部分:量子检测效率的确定 | Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1: Determination of the detective quantum efficiency |
| IEC 62226-3-1-2007 | 暴露于低频和中频范围内电场或磁场.计算人体内电流密度和内部电场感应的方法.第3-1部分:暴露于电场.分析和 | Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 3-1: Exposure to electric fields - Analytical and 2D numerical models |
| IEC 62238-2003 | 海上导航和无线电通信设备及系统.采用"D"级数字选择呼叫的甚高频无线电话设备.试验方法和要求的试验结果 | Maritime navigation and radiocommunication equipment and systems - VHF radiotelephone equipment incorporating class "D" Digital Selective Calling (DSC) - Methods of testing and required test results |
| IEC 62255-1-2006 | 宽带数字通信用多芯对称对绞/星绞电缆(高位率数字存取通信网络).外部设备电缆.第1部分:总规范 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification |
| IEC 62255-2-1-2006 | 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第2-1部分:未填充电缆.空白详 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2-1: Unfilled cables - Blank detail specification |
| IEC 62255-2-2006 | 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第2部分:未填充电缆.分规范 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2: Unfilled cables - Sectional specification |
| IEC 62255-3-1-2006 | 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第3部分:填充电缆.空白详细规 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3-1: Filled cables - Blank detail specification |
| IEC 62255-3-2006 | 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第3部分:填充电缆.分规范 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3: Filled cables - Sectional specification |
| IEC 62255-4-1-2006 | 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第4-1部分:架空引入电缆.空白 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4-1: Aerial drop cables - Blank detail specification |
| IEC 62255-4-2006 | 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第4部分:架空引入电缆.分规范 | Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication networks) - Outside plant cables - Part 4: Aerial drop cables - Sectional specification |
| IEC 62255-5-1-2006 | 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第5-1部分:填充引入电缆.空白 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5-1: Filled drop cables - Blank detail specification |
| IEC 62255-5-2006 | 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第5部分:填充引入电缆.分规范 | Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate digital access telecommunication networks) - Outside plant cables - Part 5: Filled drop cables - Sectional specification |
| IEC 62271-3-2006 | 高压开关设备和控制设备.第3部分:基于IEC 61850的数字界面 | High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850 |
| IEC 62272-1-2003 | 全球无线电数字传输（DRM).第一部分:系统规范 | Digital Radio Mondiale (DRM) - Part 1: System specification |
| IEC 62272-2-2007 | 全球数字无线广播(DRM).第2部分:波段小于30MHz的无线广播.DRM发射机的测量方法 | Digital radio mondiale (DRM) - Part 2: Digital radio in the bands below 30 MHz - Methods of measurement for DRM transmitters |
| IEC 62273-1-2007 | 无线电发射机测量方法.第1部分:地面数字电视发射机的工作特性 | Methods of measurement for radio transmitters - Part 1: Performance characteristics of terrestrial digital television transmitters |
| IEC 62289-2002 | 视频记录.使用12,65mm 磁带和混合MPEG-2的螺旋式扫描数字视频卡式录音带的录制格式.D-10格式 | Video recording - Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-2 compression - Format D-10 |
| IEC 62300-2004 | 带塑料光纤的用户音频/视频设备数字接口 | Consumer audio/video equipment digital interface with plastic optical fibre |
| IEC 62315-1-2003 | 未压缩的数字视频接口用DTV轮廓.第1部分:总则 | DTV profiles for uncompressed digital video interfaces - Part 1: General |
| IEC 62330-1-2003 | 使用12.65mm(0.5in)磁带的螺旋扫描数字视频盒式记录系统.HD-D5格式.第1部分:VTR规范 | Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 - Part 1: VTR specifications |
| IEC 62330-2-2003 | 使用12.65mm(0.5in)磁带的螺旋扫描数字视频盒式记录系统.HD-D5格式.第2部分:压缩格式 | Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 - Part 2: Compression format |
| IEC 62330-3-2003 | 使用12.65mm(0.5in)磁带的螺旋扫描数字视频盒式记录系统.HD-D5格式.第3部分:数据流格式 | Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 - Part 3: Data stream format |
| IEC 62333-1-2006 | 数字器件和设备用噪声抑制片.第1部分:定义和一般性能 | Noise suppression sheet for digital devices and equipment - Part 1: Definitions and general properties |
| IEC 62333-2-2006 | 数字器件和设备用噪声抑制片.第2部分:测量方法 | Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods |
| IEC 62360-2004 | ISDB(数字广播综合服务)用卫星和地面接收机的基础规范 | Baseline specifications of satellite and terrestrial receivers for ISDB (Integrated Service for Digital Broadcast) |
| IEC 62365-2004 | 数字音频.数字输入输出接口.异步传输模式网络上的数字音频传输 | Digital audio - Digital input-output interfacing - Transmission of digital audio over asynchronous transfer mode (ATM) networks |
| IEC 62379-1-2007 | 网络化数字音频和视频产品用通用控制接口.第1部分:总则 | Common control interface for networked digital audio and video products - Part 1: General |
| IEC 62447-1-2007 | 用6.35mm磁带的螺旋扫描压缩数字视频盒式录象带系统.格式D-12.第1部分:磁带录像机(VTR)规范 | Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-12 - Part 1: VTR specifications |
| IEC 62447-2-2007 | 用6.35mm磁带的螺旋扫描压缩数字视频盒式录象带系统.格式D-12.第2部分:压缩格式 | Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-12 - Part 2: Compression format |
| IEC 62447-3-2007 | 用6.35mm磁带的螺旋扫描压缩数字视频盒式录象带系统.格式D-12.第3部分:数据流格式 | Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-12 - Part 3: Data Stream Format |
| IEC 62481-1-2007 | 数字生活网络联盟(DLNA)家用网络装置互用性指南.第1部分:结构和协议 | Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 1: Architecture and Protocols |
| IEC 62481-2-2007 | 数字生活网络联盟(DLNA)家用网络装置互用性指南.第2部分:DLNA媒体格式 | Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 2: DLNA media formats |
| IEC/PAS 62030-2004 | 测量和控制用数字数据通信.工业控制系统用现场总线.第1节:MODBUS应用协议.规范V1.1a.第2节: 实时发行-定购. | Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Section 1: MODBUS Application Protocol - Specification V1.1a - Section 2: Real-Time Publish-Subscribe; RTPS Wire Protocol Specification Version 1.0 |
| IEC/TR 60899-1987 | 专业数字录音的采样率和声源编码 | Sampling rate and source encoding for professional digital audio recording |
| IEC/TR 61282-1-2000 | 纤维光学通信系统的设计指南 第1部分:单模数字系统和模拟系统 | Fibre optic communication system design guides - Part 1: Single-mode digital and analogue systems |
| IEC/TR 61292-2-2003 | 光学放大器技术报告.第2部分:用电频谱分析仪评价噪音数字的理论背景 | Optical amplifier technical reports - Part 2: Theoretical background for noise figure evaluation using the electrical spectrum analyzer |
| IEC/TR3 60268-18-1995 | 声系统设备 第18部分:峰值节目电平表 数字型声音峰值电平表 | Sound system equipment - Part 18: Peak programme level meters - Digital audio peak level meter |
| IEC/TR3 61119-4-1997 | 数字音频盒式磁带系统(DAT) 第4部分:字符组合格式 | Digital audio tape (DAT) cassette system - Part 4: Character pack format |
| IEC/TR3 61119-7-1995 | 数字音频盒式磁带系统(DAT) 第7部分:数字音频盒式磁带标识应用规则 | Digital audio tape cassette system (DAT) - Part 7: DAT logo application rule |
| IEC/TR3 61852-1998 | 医用电气设备 医用数字成像和通信(DICOM) 放射治疗设备 | Medical electrical equipment - Digital imaging and communications in medicine (DICOM) - Radiotherapy objects |
| IEC/TS 62404-2007 | 逻辑数字集成电路.集成电路用I/O接口模型的规范(IMIC版本1.3) | Logic digital integrated circuits - Specification for I/O interface model for integrated circuit (IMIC version 1.3) |
| ISO 10303-238-2007 | 工业自动化系统和集成.产品数据表示和交换.第238部分:应用协议:计算机数字控制用应用解释模型 | Industrial automation systems and integration - Product data representation and exchange - Part 238: Application protocol: Application interpreted model for computerized numerical controllers |
| ISO 1073-1-1976 | 光学识别字母数字字符集 第1部分:字符集OCR-A 印刷图像的形状和尺寸 | Alphanumeric character sets for optical recognition; Part 1: Character set OCR-A; Shapes and dimensions of the printed image |
| ISO 1073-2-1976 | 光学识别字母数字字符集 第2部分:字符集OCR-B 印刷图像的形状和尺寸 | Alphanumeric character sets for optical recognition; Part 2: Character set OCR-B; Shapes and dimensions of the printed image |
| ISO 11992-1-2003 | 道路车辆.牵引车和拖挂车之间电气连接数字信息的交换.第1部分:物理层和数据链层 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 1: Physical and data-link layer |
| ISO 11992-2 AMD 1-2007 | 道路车辆.牵引车和拖挂车之间电连接数字信息的交换.第2部分:制动器和传动装置用应用层.修改件1 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 2: Application layer for brakes and running gear; Amendment 1 |
| ISO 11992-2-2003 | 道路车辆.牵引车和拖挂车之间电连接数字信息的交换.第2部分:制动和传动装置用应用层 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 2: Application layer for brakes and running gear |
| ISO 11992-3-2003 | 道路车辆.牵引车和拖挂车之间电连接数字信息的交换.第3部分:不包括制动和传动装置的设备用应用层 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 3: Application layer for equipment other than brakes and running gear |
| ISO 11992-4 Technical Corrigendum 1-2006 | 道路车辆.牵引车和拖挂车之间电连接数字信息的交换.第4部分:诊断.技术勘误1 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 4: Diagnostics; Technical Corrigendum 1 |
| ISO 11992-4-2005 | 道路车辆.牵引车和拖挂车之间电连接数字信息的交换.第4部分:诊断 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 4: Diagnostics |
| ISO 12052-2006 | 医用信息.包括工作流程和数据管理的医药卫生用数字呈像和通信技术 | Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management |
| ISO 12142-2001 | 电子成像 验证数字数据光盘上存储的数据用对媒体错误监控和报告的技术 | Electronic imaging - Media error monitoring and reporting techniques for verification of stored data on optical digital data disks |
| ISO 12232-2006 | 摄影技术.数字静物照相机.曝光指数、ISO感光度标定值、标准输出灵敏度和推荐曝光指数的测定 | Photography - Digital still cameras - Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index |
| ISO 12639 AMD 1-2007 | 印刷技术.印前数字数据交换.呈像技术用标签图像文件格式(TIFF/IT).修改件1:使用JBIG2.修改件2:TIFF/IT压缩 | Graphic technology - Prepress digital data exchange - Tag image file format for image technology (TIFF/IT); Amendment 1: Use of JBIG2-Amd2 compression in TIFF/IT |
| ISO 12639-2004 | 印刷技术.印前数字数据交换.用于图像技术的标签图像文件格式(TIFF/IT) | Graphic technology - Prepress digital data exchange - Tag image file format for image technology (TIFF/IT) |
| ISO 12640 Technical Corrigendum 1-2004 | 图形技术.印前数字数据交换.第1部分:CMYK标准彩色图像数据.技术勘误1 | Graphic technology - Prepress digital data exchange - Part 1: CMYK standard colour image data (CMYK/SCID); Technical Corrigendum 1 |
| ISO 12640-1-1997 | 印刷技术.印前数字数据交换.第1部分:CMYK标准彩色图像数据(CMYK/SCID) | Graphic technology - Prepress digital data exchange - Part 1: CMYK standard colour image data (CMYK/SCID) |
| ISO 12640-2-2004 | 印刷技术.印前数字数据交换.第2部分:XYZ/sRGB编码的标准彩色图像数据 | Graphic technology - Prepress digital data exchange - Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID) |
| ISO 12640-3-2007 | 印刷技术.预印数字数据交换.第3部分:CIELAB标准颜色图象数据(CIELAB/SCID) | Graphic technology - Prepress digital data exchange - Part 3: CIELAB standard colour image data (CIELAB/SCID) |
| ISO 14096-1-2005 | 无损检验.射线摄影胶片数字化系统的鉴定.第1部分:定义、图像质量参数定量测量、标准参考胶片和定性控制 | Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control |
| ISO 14096-2-2005 | 无损检验.射线摄影胶片数字化系统的鉴定.第2部分:最低要求 | Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements |
| ISO 15740-2005 | 摄影.电子静止图像成像.数字静物摄影设备的图象传送协议(PTP) | Photography - Electronic still picture imaging - Picture transfer protocol (PTP) for digital still photography devices |
| ISO 15929-2002 | 制图技术.预压缩数字数据交换.PDF/X标准制定导则与原则 | Graphic technology - Prepress digital data exchange - Guidelines and principles for the development of PDF/X standards |
| ISO 15930-1-2001 | 印刷技术 印刷前数字数据交换 PDF的使用 第1部分：使用CMYK数据(PDF/X-1和PDF/X-1a)的完全交换 | Graphic technology - Prepress digital data exchange; Use of PDF - Part 1: Complete exchange using CMYK data (PDF/X-1 and PDF/X-1a) |
| ISO 15930-3-2002 | 图形技术.预印数字数据交换.PDF格式使用.第3部分:适用于颜色管理工作流的完整交换(PDF/X-3) | Graphic technology - Prepress digital data exchange; Use of PDF - Part 3: Complete exchange suitable for colour managed workflows (PDF/X-3) |
| ISO 15930-4-2003 | 图形技术.用PDF格式进行预印数字数据交换.第4部分:用PDF 1.4(PDF/X-1a)格式进行CMYK和点颜色印刷数据的完整 | Graphic technology - Prepress digital data exchange using PDF - Part 4: Complete exchange of CMYK and spot colour printing data using PDF 1.4 (PDF/X-1a) |
| ISO 15930-5-2003 | 图形技术.用PDF格式进行预印数字数据交换.第5部分:用PDF 1.4(PDF/X-2)格式进行印刷数据的部分交换 | Graphic technology - Prepress digital data exchange using PDF - Part 5: Partial exchange of printing data using PDF 1.4 (PDF/X-2) |
| ISO 15930-6-2003 | 图形技术.用PDF格式进行预印数字数据交换.第6部分:用PDF 1.4 (PDF/X-3)格式进行适用于颜色管理工作流的印刷 | Graphic technology - Prepress digital data exchange using PDF - Part 6: Complete exchange of printing data suitable for colour-managed workflows using PDF 1.4 (PDF/X-3) |
| ISO 16792-2006 | 技术产品文件.数字产品定义数据通则 | Technical product documentation - Digital product definition data practices |
| ISO 17266-2002 | 电影摄影.在35mm和70mm电影拷贝及底片上多频道模拟数字电影摄影声音和控制录音.位置和宽度尺寸 | Cinematography - Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives - Position and width dimensions |
| ISO 22028-1 Technical Corrigendum 1-2007 | 摄影和图形技术.数字图像存储、操作和转换用扩展的色码.第1部分:体系结构和要求.技术勘误1 | Photography and graphic technology - Extended colour encodings for digital image storage, manipulation and interchange - Part 1: Architecture and requirements; Technical Corrigendum 1 |
| ISO 22028-1-2004 | 摄影和图形技术.数字图像存储、操作和转换用扩展的色码.第1部分:体系结构和要求 | Photography and graphic technology - Extended colour encodings for digital image storage, manipulation and interchange - Part 1: Architecture and requirements |
| ISO 22234-2005 | 电影摄影.电影多路声道系统的相对和绝对声压级.适用于模拟照相软片声音、数字照相软片声音和数字影院声音的 | Cinematography - Relative and absolute sound pressure levels for motion-picture multi-channel sound systems - Measurement methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio |
| ISO 2806-1994 | 工业自动化系统 机床数字控制 词汇 两种语言版 | Industrial automation systems - Numerical control of machines - Vocabulary |
| ISO 2972-1979 | 机床数字控制 符号 | Numerical control of machines; Symbols |
| ISO 3098-2-2000 | 技术产品文件 文字 第2部分:拉丁字母表、数字和符号 | Technical product documentation - Lettering - Part 2: Latin alphabet, numerals and marks |
| ISO 3098-5-1997 | 技术产品文件 文字 第5部分:拉丁字母、数字和标志的CAD文字分类法 | Technical product documentation - Lettering - Part 5: CAD lettering of the Latin alphabet, numerals and marks |
| ISO 3592-2000 | 工业自动化系统 机床数字控制 数控(NC)处理器输出:文件结构和语言格式 | Industial automation systems - Numerical control of machines - NC processor output; File structure and language format |
| ISO 3791-1976 | 办公机器和数据处理设备 数字应用的键盘布局 | Office machines and data processing equipment; Keyboard layouts for numeric applications |
| ISO 4342-1985 | 机床数字控制 数控(NC)处理程序输入 基本零件源程序参考语言 | Numerical control of machines; NC processor input; Basic part program reference language |
| ISO 4343-2000 | 工业自动化系统 机床数字控制 数控(NC)处理程序输出 后置处理指令 | Industrial automation systems - Numerical control of machines - NC processor output; Post processor commands |
| ISO 6360-1 Technical Corrigendum 1-2007 | 牙科.旋转仪器的数字编码系统.第1部分:一般特性.技术勘误1 | Dentistry - Number coding system for rotary instruments - Part 1: General characteristics; Technical Corrigendum 1 |
| ISO 6360-1-2004 | 牙科学.牙科旋转器械的数字编码体系.第1部分:一般特性 | Dentistry - Number coding system for rotary instruments - Part 1: General characteristics |
| ISO 6360-2-2004 | 牙科学.旋转器械用数字编码体系.第2部分:形状 | Dentistry - Number coding system for rotary instruments - Part 2: Shapes |
| ISO 6360-3-2005 | 牙科学.旋转器械的数字编码系统.第3部分:磨石和刀具的具体特性 | Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristics of burs and cutters |
| ISO 6360-4-2004 | 牙科学.旋转器械的数字编码体系.第4部分:金刚石器械的具体特性 | Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments |
| ISO 6360-6-2004 | 牙科学.旋转器械的数字编码体系.第6部分:研磨器械的具体特性 | Dentistry - Number coding system for rotary instruments - Part 6: Specific characteristics of abrasive instruments |
| ISO 6360-7-2006 | 牙科学.旋转器械的数字编码体系.第7部分:心轴和特殊器械的具体特性 | Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments |
| ISO 6983-1-1982 | 机床数字控制 程序格式和地址字定义 第1部分:点位、直线运动和轮廓控制系统的数据格式 | Numerical control of machines; Program format and definition of address words; Part 1 : Data format for positioning, line motion and contouring control systems |
| ISO 7114-1990 | 家用缝纫机 数字编号分类 | Household sewing machines; numerical classification |
| ISO 7461-1984 | 造船 船舶型线 船体几何图形构件的数字表示 | Shipbuilding; Shiplines; Numerical representation of elements of the hull geometry |
| ISO 841-2001 | 工业自动化系统和集成 机床数字控制 坐标系统和运动命名 | Industrial automation systems and integration - Numerical control of machines - Coordinate system and motion nomenclature |
| ISO 8514-1-2000 | 缩微摄影技术 字母数字计算机输出缩微品 质量控制 第1部分:测试幻灯片和测试数据的特征 | Micrographics - Alphanumeric computer output microforms - Quality control - Part 1: Characteristics of the test slide and test data |
| ISO 8514-2-2000 | 缩微摄影技术 字母数字计算机输出缩微品 质量控制 第2部分:方法 | Micrographics - Alphanumeric computer output microforms - Quality control - Part 2: Method |
| ISO 9141-1989 | 道路车辆 诊断系统 对数字信息交换的要求 | Road vehicles - Diagnostic systems - Requirements for interchange of digital information |
| ISO 9141-2 AMD 1-1996 | 道路车辆 诊断系统 第2部分:交换数字信息的 CARB 要求 修改1 | Road vehicles - Diagnostic systems - Part 2: CARB requirements for interchange of digital information; Amendment 1 |
| ISO 9141-2-1994 | 道路车辆 诊断系统 第2部分:交换数字信息的 CARB 要求 | Road vehicles; diagnostic systems; part 2: CARB requirements for interchange of digital information |
| ISO/IEC 10173-1998 | 信息技术 系统间远程通信和信息交换 在S和T参考点上综合业务数字网(ISDN)基本速率接入连接器的接口连接器和 | Information technology - Telecommunications and information exchange between systems - Interface connector and contact assignments for ISDN primary rate access connector located at reference points S and T |
| ISO/IEC 10918-1 Technical Corrigendum 1-2005 | 信息技术.连续色调静态图像的数字压缩及编码.第1部分:要求和指南.技术勘误1:专利信息更新 | Information technology - Digital compression and coding of continuous-tone still images - Part 1: Requirements and guidelines; Technical Corrigendum 1: Patent information update |
| ISO/IEC 10918-1-1994 | 信息技术 连续色调静态图像的数字压缩及编码 要求和指南 | Information technology; digital compression and coding of continuous-tone still images; requirements and guidelines |
| ISO/IEC 10918-2-1995 | 信息技术 连续色调静态图像的数字压缩及编码 一致性测试 | Information technology - Digital compression and coding of continuous-tone still images: Compliance testing |
| ISO/IEC 10918-3 AMD 1-1999 | 信息技术 连续色调静态图像的数字压缩及编码:扩展 修改1:允许登记SPIFF报头的新压缩类型和版本的措施 | Information technology - Digital compression and coding of continuous-tone still images: Extensions; Amendment 1: Provisions to allow registration of new compression types and versions in the SPIFF header |
| ISO/IEC 10918-3-1997 | 信息技术 连续色调静态图像的数字压缩及编码:扩展 | Information technology - Digital compression and coding of continuous-tone still images: Extensions |
| ISO/IEC 10918-4-1999 | 信息技术 连续色调静态图像的数字压缩及编码:JPEG轮廓、SPIFF轮廓、SPIFF标签、SPIFF颜色、APP标记、SPIFF | Information technology - Digital compression and coding of continuous-tone still images: Registration of JPEG profiles, SPIFF profiles, SPIFF tags, SPIFF colour spaces, APPn markers, SPIFF compression types and Registration Authorities (REGAUT) |
| ISO/IEC 10967-2-2001 | 信息技术 独立语言运算 第2部分：基本数字功能 | Information technology - Language independent arithmetic - Part 2: Elementary numerical functions |
| ISO/IEC 10967-3-2006 | 信息技术.语言独立计算.第3部分:复合整数和浮点运算及复合基本数字功能 | Information technology - Language independent arithmetic - Part 3: Complex integer and floating point arithmetic and complex elementary numerical functions |
| ISO/IEC 11172-1 Technical Corrigendum 1-1996 | 信息技术 具有1.5Mbit/s的数字存储媒体运动图像及其伴音的编码 第1部分:系统 技术勘误1 | Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s - Part 1: Systems Technical Corrigendum 1 |
| ISO/IEC 11172-1 Technical Corrigendum 2-1999 | 信息技术 具有1.5Mbit/s的数字存储媒体运动图像及其伴音的编码 第1部分:系统 技术勘误2 | () |
| ISO/IEC 11172-1-1993 | 信息技术 具有1.5Mbit/s的数字存储媒体运动图像及其伴音的编码 第1部分:系统 | Information technology; coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s; part 1: systems |
| ISO/IEC 11172-2 Technical Corrigendum 1-1996 | 信息技术 具有1.5Mbit/s的数字存储媒体运动图像及其伴音的编码 第2部分:视频 技术勘误1 | Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s - Part 2: Video Technical Corrigendum 1 |
| ISO/IEC 11172-2 Technical Corrigendum 2-1999 | 信息技术 具有1.5Mbit/s的数字存储媒体运动图像及其伴音的编码 第2部分:视频 技术勘误2 | () |
| ISO/IEC 11172-2 Technical Corrigendum 3-2003 | 信息技术 具有1.5Mbit/s的数字存储媒体运动图像及其伴音的编码.第2部分:视频.技术勘误3 | Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 2: Video; Technical Corrigendum 3 |
| ISO/IEC 11172-2-1993 | 信息技术 具有1.5Mbit/s的数字存储媒体运动图像及其伴音的编码 第2部分:视频 | Information technology; coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s; part 2: video |
| ISO/IEC 11172-3 Technical Corrigendum 1-1996 | 信息技术 具有1.5Mbit/s的数字存储媒体运动图像及其伴音的编码 第3部分:音频 技术勘误1 | Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s - Part 3: Audio Technical Corrigendum 1 |
| ISO/IEC 11172-3-1993 | 信息技术 具有1.5Mbit/s的数字存储媒体运动图像及其伴音的编码 第3部分:音频 | Information technology; coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s; part 3: audio |
| ISO/IEC 11172-4 Technical Corrigendum 1-2007 | 信息技术.约1.5Mbit/s及以下的数字存储媒体用活动图像及其音频编码.技术勘误1 | Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 4: Compliance testing; Technical Corrigendum 1 |
| ISO/IEC 11172-4-1995 | 信息技术 具有1.5Mbit/s的数字存储媒体运动图像及其伴音的编码 第4部分:一致性测试 | Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 4: Compliance testing |
| ISO/IEC 11172-5-1998 | 信息技术 具有1.5Mbit/s的数字存储媒体运动图像及其伴音的编码 第5部分:软件模拟 | Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s - Part 5: Software simulation |
| ISO/IEC 13818-10-1999 | 信息技术.运动图像及其伴音信息的通用编码.第10部分:数字存储媒体命令和控制的一致性扩充 | Information technology - Generic coding of moving pictures and associated audio information - Part 10: Conformance extensions for Digital Storage Media Command and Control (DSM-CC) |
| ISO/IEC 13871-1995 | 信息技术.系统间远程通信和信息交换.专用远程通信网络.数字信道聚集 | Information technology - Telecommunications and information exchange between systems - Private telecommunications networks - Digital channel aggregation |
| ISO/IEC 14709-1 AMD 1-2004 | 信息技术.用于各应用的客户宅院电缆(CPC)敷设的配置.第1部分:综合业务数字网(ISDN)基本接入.修改件1 | Information technology - Configuration of Customer Premises Cabling (CPC) for applications - Part 1: Integrated Services Digital Network (ISDN) basic access; Amendment 1 |
| ISO/IEC 14709-1-1997 | 信息技术.用于各应用的客户宅院电缆(CPC)缚设的配置.第1部分:综合业务数字网(ISDN)基本接入 | Information technology - Configuration of Customer Premises Cabling (CPC) for applications - Part 1: Integrated Services Digital Network (ISDN) basic access |
| ISO/IEC 14888-1-1998 | 信息技术.安全技术.带附录的数字签名.第1部分:总则 | Information technology - Security techniques - Digital signatures with appendix - Part 1: General |
| ISO/IEC 14888-2-1999 | 信息技术 安全技术 带附录的数字签名 第2部分:以身分为基础的机制 | Information technology - Security techniques - Digital signatures with appendix - Part 2: Identity-based mechanisms |
| ISO/IEC 14888-3 Technical Corrigendum 1-2007 | 信息技术.安全技术.带附录的数字签名.第3部分:基于离散对数的机制.技术勘误1 | Information technology - Security techniques - Digital signatures with appendix - Part 3: Discrete logarithm based mechanisms; Technical Corrigendum 1 |
| ISO/IEC 14888-3-2006 | 信息技术.安全技术.带附件的数字签名.第3部分:基于离散对数的机制 | Information technology - Security techniques - Digital signatures with appendix - Part 3: Discrete logarithm based mechanisms |
| ISO/IEC 15419-2001 | 信息技术 自动识别和数据采集技术 条形码数字成像和印刷性能检测 | Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing |
| ISO/IEC 15444-1 AMD 1-2006 | 信息技术.JPEG 2000图像编码系统:核心编码系统.修改件1:数字电影应用轮廓 | Information technology - JPEG 2000 image coding system: Core coding system - Amendment 1: Profiles for digital cinema applications |
| ISO/IEC 15444-11-2007 | 信息技术.以压缩方式储存的数字影像(JPEG)2000图像编码系统:无线电系统 | Information technology - JPEG 2000 image coding system: Wireless |
| ISO/IEC 15444-12 AMD 1-2007 | 信息技术.以压缩方式储存的数字影像(JPEG)2000图像编码系统.第12部分:ISO基础媒体文件格式.修改件1:支持同 | Information technology - JPEG 2000 image coding system - Part 12: ISO base media file format; Amendment 1: Support for timed meta-data, non-square pixels and improved sample groups |
| ISO/IEC 15444-8-2007 | 信息技术.以压缩方式储存的数字影像(JPEG)2000图像编码系统.安全的以压缩方式储存的数字影像(JPEG)2000 | Information technology - JPEG 2000 image coding system: Secure JPEG 2000 |
| ISO/IEC 15945-2002 | 信息技术.安全技术.支持数字签名应用的TTP服务规范 | Information technology - Security techniques - Specification of TTP services to support the application of digital signatures |
| ISO/IEC 16500-1-1999 | 信息技术 通用数字音频-可视系统 第1部分:系统参考模型和方案 | Information technology - Generic digital audio-visual systems - Part 1: System reference models and scenarions |
| ISO/IEC 16500-2-1999 | 信息技术 通用数字音频-可视系统 第2部分:系统动态、方案和协议要求 | Information technology - Generic digital audio-visual systems - Part 2: System dynamics,scenarions and protocol requirements |
| ISO/IEC 16500-3-1999 | 信息技术 通用数字音频-可视系统 第3部分:外形:技术域 | Information technology - Generic digital audio-visual systems - Part 3: Contours: Technology domain |
| ISO/IEC 16500-4-1999 | 信息技术 通用数字音频-可视系统 第4部分:低层协议和物理接口 | Information technology - Generic digital audio-visual systems - Part 4: Lower-layer protocols and physical interfaces |
| ISO/IEC 16500-5-1999 | 信息技术 通用数字音频-可视系统 第5部分:高层和中层协议 | Information technology - Generic digital audio-visual systems - Part 5: High and mid-layer protocols |
| ISO/IEC 16500-6-1999 | 信息技术 通用数字音频-可视系统 第6部分:信息表示 | Information technology - Generic digital audio-visual systems - Part 6: Information representation |
| ISO/IEC 16500-7-1999 | 信息技术 通用数字音频-可视系统 第7部分:基本安全工具 | Information technology - Generic digital audio-visual systems - Part 7: Basic security tools |
| ISO/IEC 16500-8-1999 | 信息技术 通用数字音频-可视系统 第8部分:管理体系结构和协议 | Information technology - Generic digital audio-visual systems - Part 8: Management architecture and protocols |
| ISO/IEC 16500-9-1999 | 信息技术 通用数字音频-可视系统 第9部分:使用信息协议 | Information technology - Generic digital audio-visual systems - Part 9: Usage information protocols |
| ISO/IEC 18050-2006 | 信息技术.办公设备.机读数字邮政标记的打印质量特征 | Information technology - Office equipment - Print quality attributes for machine readable Digital Postage Marks |
| ISO/IEC 21000-10 AMD 1-2006 | 信息技术.多媒体框架(MPEG-21).第10部分:数字项目处理.修改件1:附加C++捆绑 | Information technology - Multimedia framework (MPEG-21) - Part 10: Digital Item Processing - Amendment 1: Additional C++ bindings |
| ISO/IEC 21000-10-2006 | 信息技术.多媒体框架(MPEG-21).第10部分:数字项目处理 | Information technology - Multimedia framework (MPEG-21) - Part 10: Digital item processing |
| ISO/IEC 21000-18-2007 | 信息技术.多媒体框架(MPEG-21).第18部分:数字项流动 | Information technology - Multimedia framework (MPEG-21) - Part 18: Digital Item Streaming |
| ISO/IEC 21000-2-2005 | 信息技术.多媒体框架(MPEG-21).第2部分:数字项目说明 | Information technology - Multimedia framework (MPEG-21) - Part 2: Digital Item Declaration |
| ISO/IEC 21000-3 AMD 1-2007 | 信息技术.多媒体框架(MPEG-21).第3部分:数字项目识别.修改件1:相关识别符类型 | Information technology - Multimedia framework (MPEG-21) - Part 3: Digital Item Identification; Amendment 1: Relates identifier types |
| ISO/IEC 21000-3-2003 | 信息技术.多媒体框架(MPEG-21).第3部分:数字项识别 | Information technology - Multimedia framework (MPEG-21) - Part 3: Digital item identification |
| ISO/IEC 21000-6 AMD 1-2006 | 信息技术.多媒体框架(MPEG-21).第6部分:权限数据词典.修改件1:数字项目标识符关系类型 | Information technology - Multimedia framework (MPEG-21) - Part 6: Rights Data Dictionary - Amendment 1: Digital Item Identifier relationship types |
| ISO/IEC 21000-7 AMD 1-2006 | 信息技术.多媒体框架(MPEG-21).第7部分:数字项匹配.修改件1:DIA转换和许可 | Information technology - Multimedia framework (MPEG-21) - Part 7: Digital item adaption; Amendment 1: DIA Conversions and permissions |
| ISO/IEC 21000-7 AMD 2-2007 | 信息技术.多媒体框架(MPEG-21).第7部分:数字项目适应.修改件2:动力学和分布式适应 | Information technology - Multimedia framework (MPEG-21) - Part 7: Digital Item Adaptation - Amendment 2: Dynamic and Distributed Adaptation |
| ISO/IEC 21000-7-2004 | 信息技术.多媒体框架(MPEG-21).第7部分:数字项目自适应 | Information technology - Multimedia framework (MPEG-21) - Part 7: Digital Item Adaptation |
| ISO/IEC 26925-2006 | 信息技术.信息交换用数字存储媒体.使用+RW HS格式在120mm和80mm光盘上的数据交换.容量:每面4.7Gbytes和1.46 | Information technology - Digital storage media for information interchange - Data Interchange on 120 mm and 80 mm Optical Disk using +RW HS Format - Capacity: 4,7 and 1,46 Gbytes per Side (Recording speed 8X) |
| ISO/IEC 8441-1-1991 | 信息技术 高密度数字记录(HDDR) 第1部分:HDDR应用的未记录磁带 | Information technology; high density digital recording (HDDR); part 1: unrecorded magnetic tape for (HDDR) applications |
| ISO/IEC 8441-2-1991 | 信息技术 高密度数字记录(HDDR) 第2部分:交换实践指南 | Information technology; high density digital recording (HDDR); part 2: guide for interchange practice |
| ISO/IEC 9574-1992 | 信息技术.连接到综合服务数字网(ISDN)的包式终端设备提供OSI连接式网络服务 | Information technology; provision of the OSI connection-mode network service by packet mode terminal equipment to an integrated services digital network (ISDN) |
| ISO/IEC 9796-2-2002 | 信息技术.安全技术.带消息恢复的数字签名方案.第2部分:基于整数因子分解的机制 | Information technology - Security techniques, Digital signature schemes giving message recovery - Part 2: Integer factorization based mechanisms |
| ISO/IEC 9796-3-2006 | 信息技术.安全技术.带电文恢复的数字签名方案.第3部分:基于离散对数的机制 | Information technology - Security techniques - Digital signature schemes giving message recovery - Part 3: Discrete logarithm based mechanisms |
| ISO/IEC 9798-3-1998 | 信息技术 安全技术 实体鉴别 第3部分:用数字签名技术的机制 | Information technology - Security techniques - Entity authentication - Part 3: Mechanisms using digital signature techniques |
| ISO/IEC 9995-2-2002 | 信息技术.文本和办公系统用键盘配置.第2部分:字母数字区 | Information technology - Keyboard layouts for text and office systems - Part 2: Alphanumeric section |
| ISO/IEC 9995-3-2002 | 信息技术.文本和办公系统用键盘配置.第3部分:字母数字区的字母数字的分区补充布局 | Information technology - Keyboard layouts for text and office systems - Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section |
| ISO/IEC 9995-4-2002 | 信息技术.文本和办公系统用键盘配置.第4部分:数字集 | Information technoloy - Keyboard layouts for text and office systems - Part 4: Numeric section |
| ISO/IEC ISP 10609-23-1995 | 信息技术 国际标准化轮廓TB、TC、TD和TE 连接方式网络服务之上的连接方式运输服务 第23部分:涉及采用虚呼叫 | () |
| ISO/IEC ISP 10609-24-1995 | 信息技术 国际标准化轮廓TB、TC、TD和TE 连接方式网络服务之上的连接方式运输服务 第24部分:涉及采用虚呼叫 | () |
| ISO/IEC ISP 10609-26-1995 | 信息技术 国际标准化轮廓TB、TC、TD和TE 连接方式网络服务之上的连接方式运输服务 第26部分:涉及采用虚呼叫 | () |
| ISO/IEC ISP 10609-27-1995 | 信息技术 国际标准化轮廓TB、TC、TD和TE 连接方式网络服务之上的连接方式运输服务 第27部分:涉及采用虚呼叫 | () |
| ISO/IEC ISP 10613-16-1995 | 信息技术.国际标准化轮廓RA.中继无连接方式网络服务.第16部分:轮廓RA53.1121的定义,在数字数据电路/CSDN租 | Information technology - International standardized profile RA - Relaying the connectionless-mode network service - Part 16: Definition of profile RA53.1121, relaying the connectionless-mode network service between token ring LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access |
| ISO/IEC ISP 10613-18-1995 | 信息技术.国际标准化轮廓RA.中继无连接方式网络服务.第18部分:轮廓RA54.1121的定义,在数字数据电路/CSDN租 | Information technology - International standardized profile RA - Relaying the connectionless-mode network service - Part 18: Definition of profile RA54.1121, relaying the connectionless-mode network service between FDDI LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access |
| ISO/IEC ISP 10613-9-1994 | 信息技术 国际标准化轮廓RA 中继无连接方式网络服务 第9部分:RA51.1121轮廓定义,在数字数据电路/CSDN租用线 | Information technology - International Standardized Profile RA - Relaying the connectionless-mode network service - Part 9: Definition of profile RA51.1121, relaying the connectionless-mode network service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access |
| ISO/IEC ISP 10614-6-1995 | 信息技术 国际标准化轮廓RC.X.25协议中继 第6部分:轮廓51.1121的定义,在数字数据电路/CSDN租用线路永久接上 | Information technology - International standardized profile RC - X.25 protocol relaying - Part 6: Definition of profile RC51.1121, X.25 protocol relaying between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access |
| ISO/IEC ISP 12067-5-1996 | 信息技术.国际标准化轮廓RB.中继连接方式网络服务.第5部分:RB51.1121轮廓定义,在数字数据电路/CSDN租用线路 | Information technology - International standardized profile RB - Relaying the connection-mode network service - Part 5: Definition of profile RB51.1121, relaying the connection-mode network service between CSMA/CD LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN leased line permanent access |
| ISO/IEC TR 16501-1999 | 信息技术 通用数字音频-可视系统 关于数字音频-可视功能的ISO/IEC 16500描述的技术报告 | Information technology - Generic digital audio-visual systems - Technical report on ISO/IEC 16500-Description of digital audio-visual functionalities |
| ISO/IEC TR 24705-2005 | 信息技术.办公器材.彩色图像复印机.数字和模拟试验用图表的彩色设备的图像复印列表法 | Information technology - Office machines - Machines for colour image reproduction - Method of specifying image reproduction of colour devices by digital and analog test charts |
| ISO/TR 13668-1998 | 口腔卫生及护理用数字代码 | Digital coding of oral health and care |
| ISO/TR 15599 Technical Corrigendum 1-2003 | 牙科实验室规程的数字化编纂.技术勘误1 | Digital codification of dental laboratory procedures; Technical Corrigendum 1 |
| ISO/TR 15599-2002 | 牙科实验室规程的数字化编撰 | Digital codification of dental laboratory procedures |
| ISO/TR 6132-1981 | 机床数字控制 工作指令和数据格式 | Numerical control of machines; Operational command and data format |
| ISO/TS 22028-2-2006 | 摄影和图像技术.数字图像存储、操作和交换的扩展颜色编码.第2部分:参考输出媒体测量RGB颜色图像编码(ROMM R | Photography and graphic technology - Extended colour encodings for digital image storage, manipulation and interchange - Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB) |
| ISO/TS 22028-3-2006 | 摄影和图像技术.数字图像存储、操作和交换的扩展色码.第3部分:参考输入媒体米制RGB颜色图像编码(ROMM RGB) | Photography and graphic technology - Extended colour encodings for digital image storage, manipulation and interchange - Part 3: Reference input medium metric RGB colour image encoding (RIMM RGB) |
| 编号 | 中文名称 | 英文名称 |