| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 2/1533/CD-2008 | IEC/TS 60034-20-2:旋转电机.第20-2部分:无刷永磁电机用工作特性和试验规范 | IEC/TS 60034-20-2: Rotating electrical machines - Part 20-2: Performance characteristics and testing specifications for brushless permanent magnet motors |
| IEC 2/1540/CD-2009 | IEC/TS 60034-18-34:旋转电机.第18-34:绝缘系统功能评估.成型绕组的试验程序.绝缘系统的热机耐久性评估 | IEC/TS 60034-18-34: Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| IEC 60027-4-2006 | 电气技术用字母符号.第4部分:旋转电机 | Letter symbols to be used in electrical technology - Part 4: Rotating electric machines |
| IEC 60034-1-2010 | 旋转电机.第1部分:额定功率与性能 | Rotating electrical machines - Part 1: Rating and performance |
| IEC 60034-11-2004 | 旋转电机.第11部分:热防护 | Rotating electrical machines - Part 11: Thermal protection |
| IEC 60034-12 AMD 1-2007 | 旋转电机.第12部分:单速三相笼型感应电动机的起动性能.修改件1 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors; Amendment 1 |
| IEC 60034-12 Edition 2.1-2007 | 旋转电机.第12部分:单速三相笼型感应电动机的起动性能 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors |
| IEC 60034-14 AMD 1-2007 | 旋转电机.第14部分:轴中心高≥56mm固定机械的机械振动.振动激烈性测量、评估和限度.修改件1 | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity; Amendment 1 |
| IEC 60034-14 Edition 3.1-2007 | 旋转电机.第14部分:轴高≥56mm 固定机械的机械振动.测量、评定和振动极限 | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
| IEC 60034-14-2003 | 旋转电机.第14部分:轴中心高56mm及以上的电机机械振动.振动强度的测量、评价和限值 | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher; Measurement, evaluation and limits of vibration severity |
| IEC 60034-15-2009 | 旋转电机.第15部分:带定子成型线圈的交流旋转电机的脉冲电压耐受等级 | Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines |
| IEC 60034-16-1 Corrigendum 1-1992 | 旋转电机.第16部分:同步机励磁系统.第1章:定义.技术勘误1 | Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 1: Definitions; Corrigendum 1 |
| IEC 60034-16-1-1991 | 旋转电机.第16部分:同步电机励磁系统.第1章:定义 | Rotating electrical machines; part 16: excitation systems for synchronous machines; chapter 1: definitions |
| IEC 60034-16-2-1991 | 旋转电机.第16部分:同步电机励磁系统.第2章:电力系统研究模型 | Rotating electrical machines; part 16: excitation systems for synchronous machines; chapter 2: models for power system studies |
| IEC 60034-18-1 AMD 1-1996 | 旋转电机 第18部分:绝缘结构功能性评定 第1节:总指南 修改1 | Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 1: General guidelines; Amendment 1 |
| IEC 60034-18-1 Corrigendum 1-1992 | 旋转电机用绝缘系统的功能评估.第1部分:一般指南.技术勘误1 | Functional evaluation of insulation systems for rotating electrical machines - Part 1: General guidelines; Corrigendum 1 |
| IEC 60034-18-1-1992 | 旋转电机 第18部分:绝缘结构功能性评定 第1节:总指南 | Functional evaluation of insulation systems for rotating electrical machines; part 1: general guidelines |
| IEC 60034-18-21 AMD 1-1994 | 旋转电机 第18部分:绝缘结构功能性评定 第21节:散绕组试验规程 热评定和分级 修改1 | Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 21: Test procedures for wire-wound windings; Thermal evaluation and classification; Amendment 1 |
| IEC 60034-18-21 AMD 2-1996 | 旋转电机 第18部分:绝缘结构功能性评定 第21节:散绕组试验规程 热评定和分级 修改2 | Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 21: Test procedures for wire-wound windings - Thermal evaluation and classification; Amendment 2 |
| IEC 60034-18-21-1992 | 旋转电机 第18部分:绝缘结构功能性评定 第21节:散绕组试验规程 热评定和分级 | Rotating electrical machines; part 18: functional evaluation of insulation systems; section 21: test procedures for wire-wound windings; thermal evaluation and classification |
| IEC 60034-18-22-2000 | 旋转电机绝缘结构功能性评定.散绕组试验规程.变更和绝缘组分替代的分级 | Functional evaluation of insulation systems for rotating electrical machines - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions |
| IEC 60034-18-31 AMD 1-1996 | 旋转电机 第18部分:绝缘结构功能性评定 第31节:成型绕组的试验规程 50MVA、15kV及以下电机的绝缘结构的热评 | Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 31: Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 kV; Amendment 1 |
| IEC 60034-18-31-1992 | 旋转电机绝缘结构功能性评定.成型绕组试验规程.50MVA、15kV及以下电机绝缘结构热评定和分级 | Functional evaluation of insulation systems for rotating electrical machines - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 kV |
| IEC 60034-18-32-1995 | 旋转电机绝缘结构功能性评定.成型绕组试验规程.50MVA、15kV及以下电机绝缘结构电评定 | Functional evaluation of insulation systems for rotating electrical machines - Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV |
| IEC 60034-18-33-1995 | 旋转电机绝缘结构功能性评定 成型饶组试验规程 多因子功能性评定50MVA、15kV及以下电机绝缘结构热、电综合 | Rotating electrical machines - Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA and 15kV |
| IEC 60034-18-34-2000 | 旋转电机绝缘结构功能性评定 成型绕组试验规程 绝缘结构热机械耐久性评定 | Rotating electrical machine - Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| IEC 60034-19-1995 | 普通电源或整流电源供电直流电机的特殊试验方法 | Specific test methods for d. c. machines on conventional and rectifier-fed supplies |
| IEC 60034-2-1-2007 | 旋转电机.第2-1部分:试验(不包括牵引车辆用电机)中损失和功效的测定用标准方法 | Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
| IEC 60034-22-2009 | 旋转电机.第22部分:往复式内燃机驱动的发电机组用交流发电机 | Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets |
| IEC 60034-23-2003 | 旋转电机整修规范 | Rotating electrical machines - Part23:Specification for the refurbishing of rotating electrical machines |
| IEC 60034-26-2006 | 旋转电机.第26部分:不平衡电压对三相感应发动机性能的影响 | Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase induction motors |
| IEC 60034-28-2007 | 旋转电机.第28部分:低压三相鼠笼型感应电动机等效电路图数量测定的试验方法 | Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors |
| IEC 60034-29-2008 | 旋转电机.第29部分:等效加载和迭加技术.测定温升的间接试验 | Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise |
| IEC 60034-2A-1974 | 旋转电机 第2部分:旋转电机损耗和效率的试验测定方法(不包括牵引车辆用电机) 补充1:用量热法测定损耗 | Rotating electrical machines; part 2: methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicules); first supplement: measurement of losses by the calorimetric method |
| IEC 60034-3-2007 | 旋转电机.第3部分:用蒸汽涡轮机或燃气涡轮机驱动的同步发电机用特殊需求 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| IEC 60034-30-2008 | 旋转电机.第30部分:单速三相鼠笼式感应电动机的有效等级(IE编码) | Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage induction motors (IE code) |
| IEC 60034-4-2008 | 旋转电机.第4部分:试验中同步电机参数的测定用方法 | Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests |
| IEC 60034-5 AMD 1-2006 | 旋转电机.第5部分:旋转电机整体设计防护等级(IP代码).分类.修改件1 | Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code); Classification; Amendment 1 |
| IEC 60034-5 Corrigendum 1-2001 | 旋转电机.第5部分:旋转电机整体设计防护等级(IP代码).分类 | Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code); Classification |
| IEC 60034-5 Edition 4.1-2006 | 旋转电机.第5部分:旋转电机整体设计防护等级(IP代码).分类 | Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification |
| IEC 60034-5-2000 | 旋转电机整体结构的防护等级(IP代码).分级 | Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code); Classification |
| IEC 60034-6-1991 | 旋转电机 第6部分:冷却方法(IC代号) | Rotating electrical machines; part 6: methods of cooling (IC code) |
| IEC 60034-7 AMD 1-2000 | 旋转电机 第7部分:结构型式的分类、安装布置和接线盒位置(IM)代号 修改1 | Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code); Amendment 1 |
| IEC 60034-7 Edition 2.1-2001 | 旋转电机.第7部分:结构类型分类、安装方法和终端接线盒位置 | Rotating electrical machines - Part 7: Classification of types of constructions, mounting arrangements and terminal box position (IM code) |
| IEC 60034-7-1992 | 旋转电机 第7部分:结构型式的分类和安装布置(IM代号) | Rotating electrical machines; part 7: classification of types of constructions and mounting arrangements (IM code) |
| IEC 60034-7-2001 | 旋转电机结构型式、安装型式接线盒的位置的分类(IM代码) | Rotating electrical machines--Classification of types of construction,mounting arrangements and terminal box position for (IM Code) |
| IEC 60034-8-2007 | 旋转电机.第8部分:终端标志和旋转方向 | Rotating electrical machines - Part 8: Terminal markings and direction of rotation |
| IEC 60034-9 AMD 1-2007 | 旋转电机.第9部分:噪声限值.修改件1 | Rotating electrical machines - Part 9: Noise limits; Amendment 1 |
| IEC 60034-9 Edition 4.1-2007 | 旋转电机.第9部分:噪声限值 | Rotating electrical machines - Part 9: Noise limits |
| IEC 60034-9-2003 | 旋转电机.第9部分:噪声限值 | Rotating electrical machines - Part 9: Noise limits |
| IEC 60034-9-2007 | 旋转电机噪声测定方法及限值 第３部分：噪声限值 | Measurement of airborne noise emitted by rotating electrical machines and the noise limits -Part 3:Noise limits |
| IEC 60050-411-1996 | 国际电工词汇 第411章:旋转电机 | International Electrotechnical Vocabulary - Chapter 411: Rotating machines |
| IEC 60050-415-1999 | 国际电工词汇 第415部分:风轮发电机系统 | International Electrotechnical Vocabulary - Part 415: Wind turbine generator systems |
| IEC 60072-1-1991 | 旋转电机的尺寸及功率等级 第1部分:机座号:56～400、凸缘号:55～1080 | Dimensions and output series for rotating electrical machines; part 1: frame numbers 56 to 400 and flange numbers 55 to 1080 |
| IEC 60072-2-1990 | 旋转电机的尺寸及功率等级 第2部分:机座号:355～1000、凸缘号:1180～2360 | Dimensions and output series for rotating electrical machines; part 2: frame numbers 355 to 1000 and flange numbers 1180 to 2360 |
| IEC 60072-3-1994 | 旋转电机的尺寸及功率等级 第3部分:内装式小功率电机、凸缘号:BF10～BF50 | Dimensions and output series for rotating electrical machines; part 3: small built-in motors; flange numbers BF10 to BF50 |
| IEC 60092-301 AMD 1-1994 | 船舶电气设施 第301部分:设备 发电机和电动机 修改1 | Electrical installations in ships - Part 301: Equipment - Generators and motors; Amendment 1 |
| IEC 60092-301 AMD 2-1995 | 船舶电气设施 第301部分:设备 发电机和电动机 修改2 | Electrical installations in ships - Part 301: Equipment - Generators and motors; Amendment 2 |
| IEC 60092-301-1980 | 船舶电气设施 第301部分:设备 发电机和电动机 | Electrical installations in ships. Part 301 : Equipment - Generators and motors |
| IEC 60136 AMD 1-1995 | 电机用电刷和刷握尺寸 修改1 | Dimensions of brushes and brush-holders for electrical machinery; Amendment 1 |
| IEC 60136-1986 | 电机用电刷和刷握尺寸 | Dimensions of brushes and brush-holders for electrical machinery |
| IEC 60335-2-64-2002 | 家用及类似用途电器的安全.第2-64部分:商用炊事电机械的特殊要求 | Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines |
| IEC 60349-1 AMD 1-2002 | 电力牵引.铁路与道路车辆用旋转电机.第1部分:除电子交流器供电的交流电动机之外的旋转电机.修改1 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors; Amendment 1 |
| IEC 60349-1 Edition 1.1-2002 | 电力牵引.铁路与道路车辆用旋转电机.第1部分:除电子变流器供电的交流电动机之外的旋转电机 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors |
| IEC 60349-1-1999 | 电力牵引 铁路与道路车辆用旋转电机 第1部分:除电子变流器供电的交流电动机之外的旋转电机 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic convertor-fed alternating current motors |
| IEC 60349-2-2002 | 电力牵引.铁路与道路车辆用旋转电机.第2部分:电子变流器供电的交流电动机 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic convertor-fed alternating current motors |
| IEC 60364-5-55 AMD 1-2001 | 建筑物的电气设施 第5部分:电气设备的选择和安装 第55章:其他设备 第551节:低压发电机组 修改1 | Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment; Other equipment; Amendment 1 |
| IEC 60413-1972 | 测定电机用电刷材料物理性能试验规程 | Test procedures for determining physical properties of brush materials for electrical machines |
| IEC 60512-23-3 Corrigendum 1-2003 | 电子设备用电机元件.基本测试程序和测量方法.第23-3部分:试验23c:连接器和附件的屏蔽效果 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories |
| IEC 60512-23-3-2000 | 电子设备用电机元件.基本试验程序和测量方法.第23-3部分:试验23c.连接件和附属件的屏蔽效应 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories |
| IEC 60560-1977 | 电机用刷握的定义和术语 | Definitions and terminology of brush-holders for electrical machines |
| IEC 60842-1988 | 氢冷式涡轮同步电机的使用与运行导则 | Guide for application and operation of turbine-type synchronous machines using hydrogen as a coolant. |
| IEC 60894 Corrigendum 1-1987 | 电机绕组线圈和线棒损耗角正切测量的试验程序指南 | Guide for a test procedure for the measurement of loss tangent of coils and bars for machine windings; Corrigendum 1 |
| IEC 60947-8 AMD 1-2006 | 低压开关和控制设备.第8部分:旋转电机用嵌入式热保护(PTC)控制装置 | Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines; Amendment 1 |
| IEC 60947-8 Edition 1.1-2006 | 低压开关和控制设备.第8部分:旋转电机用嵌入式热保护(PTC)控制装置 | Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines |
| IEC 60947-8-2003 | 低压开关设备和控制设备.第8部分:旋转电机用嵌入式热保护控制装置 | Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines |
| IEC 61400-11 AMD 1-2006 | 风轮发电机系统.第11部分:噪音测量技术.修改件1 | Wind turbine generator systems - Part 11: Acoustic noise measurement techniques; Amendment 1 |
| IEC 61400-11 Edition 2.1-2006 | 风轮发电机系统.第11部分:噪音测量技术 | Wind turbine generator systems - Part 11: Acoustic noise measurement techniques |
| IEC 61400-11-2002 | 风轮发电机系统.第11部分:噪音测量技术 | Wind turbine generator systems - Part 11: Acoustic noise measurement techniques |
| IEC 62047-4-2008 | 半导体装置.微电机装置.第4部分:MEMS用总规范 | Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specifications for MEMS |
| IEC 62047-6-2009 | 半导体装置.微电机装置.第6部分:薄膜材料的轴向疲劳试验方法 | Semiconductor devices - Micro-electromechanical devices - Part 6: Axial fatigue testing methods of thin film materials |
| IEC 88528-11-2004 | 往复式内燃机驱动交流发电机组.第11部分:旋转的不间断电力系统.性能要求和试验方法 | Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods |
| IEC 9/1135/CD-2008 | 电力牵引.铁路和道路车辆用旋转电机.第3部分:用组件损耗总和测定变流器供电交流电动机的总损耗 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses |
| IEC/PAS 62072-2005 | 旋转电机用天然石墨刷.基本特性 | Natural graphite brush for rotating electrical machinery - Basic characteristics |
| IEC/PAS 62515-2007 | 关于CAx系统中电机和电气应用之间协同工作能力的要求 | Requirements concerning the interoperability between electromechanical and electrical applications in CAx-systems |
| IEC/TR 60638-1979 | 牵引用旋转电机换向的评定和确定等级准则 | Criteria for assessing and coding of the commutation of rotating electrical machines for traction |
| IEC/TR 60785-1984 | 电动汽车用旋转电机 | Rotating machines for electric road vehicles |
| IEC/TR 61015-1990 | 电机用刷握 施加于电刷的静压力的测量指南 | Brush-holders for electrical machines; guide to the measurement of the static thrust applied to brushes |
| IEC/TR 61400-24-2002 | 风力涡轮机发电机系统.第24部分:避雷装置 | Wind turbine generator systems - Part 24: Lightning protection |
| IEC/TR2 60034-16-2-1991 | 旋转电机.第16部分:同步电机励磁系统.第2章:动力系统研究模型 | Rotating electrical machines; part 16: excitation systems for synchronous machines; chapter 2: models for power system studies |
| IEC/TR2 60034-16-3-1996 | 旋转电机 第16部分:同步电机励磁系统 第3节:动态性能 | Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance |
| IEC/TR2 60034-18-32-1995 | 旋转电机 第18部分:绝缘结构的功能性评定 第32节:成型绕组试验规程 50MVA、15kV及以下电机绝缘结构的电气评 | Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 32: Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV |
| IEC/TR2 60034-18-33-1995 | 旋转电机 第18部分:绝缘结构的功能性评定 第33节:成型绕组试验规程 多因素功能性评定 50MVA、15kV及以下电 | Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 33: Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA and 15 kV |
| IEC/TR2 60349-3-1995 | 电力牵引 铁路和道路车辆用旋转电机 第3部分:用组件损耗总和确定变流器供电的交流电动机的总损耗 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of convertor-fed alternating current motors by summation of the component losses |
| IEC/TS 60034-17-2006 | 旋转电机.第17部分:变频供电的笼型感应电动机.应用指南 | Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide |
| IEC/TS 60034-18-34-2000 | 旋转电机 第18-34部分:绝缘结构功能性评定 成型绕组试验规程 绝缘结构的热机耐受强度评定 | Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| IEC/TS 60034-18-41-2006 | 旋转电机.第18-41部分:电压转换的旋转电机中用I型电绝缘系统评价和性能试验 | Rotating electrical machines - Part 18-41: Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines fed from voltage converters |
| IEC/TS 60034-18-42-2008 | 旋转电机.第18-42部分:电压转换器馈电的旋转电机用抗局部放电电气绝缘系统(II型)的鉴定和验收试验 | Rotating electrical machines - Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters |
| IEC/TS 60034-20-1-2002 | 旋转电机.第20-1部分:控制发动机.步进马达 | Rotating electrical machines - Part 20-1: Control motors; Stepping motors |
| IEC/TS 60034-23-2003 | 旋转电机.第23部分:旋转电机的整修规范 | Rotating electrical machines - Part 23: Specification for the refurbishing of rotating electrical machines |
| IEC/TS 60034-24-2009 | 旋转电机.第24部分:在线探测和诊断旋转电机和轴承电流的有源部件的可能缺陷.应用指南 | Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide |
| IEC/TS 60034-25-2007 | 旋转电机.第25部分:专为变频电源设计的交流电动机的设计和性能指南 | Rotating electrical machines - Part 25: Guidance for the design and performance of a.c. motors specifically designed for converter supply |
| IEC/TS 60034-27-2006 | 旋转电机.第27部分:在旋转电机绝缘子绕组上的局部离线放电测量 | Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines |
| IEC/TS 61400-13-2001 | 风轮发电机系统 第13部分：机械负载的测量 | Wind turbine generator systems - Part 13: Measurement of mechanical loads |
| IEC/TS 61400-23-2001 | 风轮发电机系统 第23部分：转子叶片的全尺寸比例结构试验 | Wind turbine generator systems - Part 23: Full-scale structural testing of rotor blades |
| IEC/TS 62257-7-1-2006 | 农村电气化用小型可再生能源和混合系统的建议.第7-1部分:发电机.光电部署 | Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7-1: Generators - Photovoltaic arrays |
| IEC/TS 62257-7-2008 | 农村电气化用小型可再生能源和混合系统的建议.第7部分:发电机 | Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7: Generators |
| ISO 10816-2-2009 | 机械振动.通过在非旋转部件上的测量评价机械振动.第2部分:功率超过50MW,额定转速为1500 r/min、1800 r/min | Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| ISO 1680-1999 | 声学 测定旋转式电机发射的空气声的试验规程 | Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines |
| ISO 7650 AMD 1-2001 | 商用车辆和公共汽车 1、2、3和4型起动电机的装配尺寸 修改1 | Commercial vehicles and buses - Mounting dimensions for starter motors of types 1, 2, 3 and 4; Amendment 1 |
| ISO 7650-1987 | 商用车辆和公共汽车 1、2、3和4型起动电机的装配尺寸 | Commercial vehicles and buses; Mounting dimensions for starter motors of types 1, 2, 3 and 4 |
| ISO 7651-1991 | 商用车辆和公共汽车 1、2、3型交流发电机安装尺寸 | Commercial vehicles and buses; mounting dimensions for alternators of types 1, 2 and 3 |
| ISO 7919-2-2009 | 机械振动.通过在旋转轴上的测量评价机械振动.第2部分:功率超过50MW、额定转速在1500r/min、1800 r/min、300 | Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| ISO 8123-1991 | 道路车辆 起动电机径节小齿轮 | Road vehicles; diametral pitch starter motor pinions |
| ISO 8528-1-2005 | 往复式内燃交流发电机组.第1部分:用途、定额及性能 | Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application, ratings and performance |
| ISO 8528-10-1998 | 往复式内燃交流发电机组 第10部分:包络面法测量空气噪声 | Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise by the enveloping surface method |
| ISO 8528-12-1997 | 往复式内燃交流发电机组 第12部分:应急发电设备 | Reciprocating internal combustion engine driven alternating current generating sets - Part 12: Emergency power supply to safety services |
| ISO 8528-2-2005 | 往复式内燃交流发电机组 第2部分:发动机 | Reciprocating internal combustion engine driven alternating current generating sets - Part 2: Engines |
| ISO 8528-3-2005 | 往复式内燃机驱动的交流发电机组.第3部分:发电机组用交流发电机 | Reciprocating internal combustion engine driven alternating current generating sets - Part 3: Alternating current generators for generating sets |
| ISO 8528-4-2005 | 往复式内燃交流发电机组.第4部分:控制装置与开关装置 | Reciprocating internal combustion engine driven alternating current generating sets - Part 4: Controlgear and switchgear |
| ISO 8528-5-2005 | 往复式内燃机驱动的交流发电机组.第5部分:发电机组 | Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets |
| ISO 8528-6-2005 | 往复式内燃交流发电机组.第6部分:试验方法 | Reciprocating internal combustion engine driven alternating current generating sets - Part 6: Test methods |
| ISO 8528-7-1994 | 往复式内燃交流发电机组 第7部分:技术规格和设计说明 | Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design |
| ISO 8528-8-1995 | 往复式内燃交流发电机组 第8部分:小功率发电机组技术要求和试验 | Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets |
| ISO 8528-9-1995 | 往复式内燃交流发电机组 第9部分:机械振动的测量和评定 | Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibration |
| ISO 8854-1988 | 道路车辆 带调节器的交流发电机 试验方法和一般要求 | Road vehicles; alternators with regulators; test methods and general requirements |
| ISO 9457-1-1991 | 道路车辆 米制起动电机小齿轮 第1部分:通常使用的小齿轮 | Road vehicles; metric starter motor pinions; part 1: currently used pinions |
| ISO 9457-2-1994 | 道路车辆.米制起动电机小齿轮.第2部分:具有20度压力角的小齿轮 | Road vehicles - Metric starter motor pinions - Part 2: Pinions with 20° pressure angle |
| 编号 | 中文名称 | 英文名称 |