| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 60050-212-1990 | 国际电工词汇 第212章:绝缘固体、液体和气体 | International electrotechnical vocabulary; chapter 212: insulating solids, liquids and gases |
| IEC 60068-2-60-1995 | 环境试验 第2-60部分:试验 试验Ke:流动混合气体腐蚀试验 | Environmental testing - Part 2: Tests - Test Ke: Flowing mixed gas corrosion test |
| IEC 60079-1-1-2002 | 易爆气体环境中的电气设备.第1-1部分:防火外壳"d".断定最大实验安全间隙的试验方法 | Electrical apparatus for explosive gas atmospheres - Part 1-1: Flameproof enclosures "d"; Method of test for ascertainment of maximum experimental safe gap |
| IEC 60079-10-2002 | 爆炸性气体环境用电气设备.第10部分:危险场所的分类 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| IEC 60079-14-2002 | 爆炸性气体环境的电气设备.第14部分:危险场所(矿井除外)中的电气装置 | Electrical apparatus for explosive gas atmospheres - Part 14: Electrical installations in hazardous areas (other than mines) |
| IEC 60079-15-2005 | 爆炸性气体环境用电气设备 第15部分:"n"防护型电气设备的结构、试验和标记 | Electrical apparatus for explosive gas atmospheres - Part 15: Construction, test and marking of type of protection "n" electrical apparatus |
| IEC 60079-18-2004 | 爆炸性气体环境用电气设备.第18部分:包封"m"型防护电气设备的建造、试验和标记 | Electrical apparatus for explosive gas atmospheres - Part 18: Encapsulation "m" |
| IEC 60079-25-2003 | 爆炸性气体环境用电气设备.第25部分:本质安全型系统 | Electrical apparatus for explosive gas atmospheres - Part 25: Intrinsically safe systems |
| IEC 60079-27-2005 | 爆炸性气体环境用电气设备.第27部分:现场总线本质安全原理(FISCO)和现场总线不易燃原理(FNICO) | Electrical apparatus for explosive gas atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO) |
| IEC 60079-28-2006 | 爆炸性气体.第28部分:用光辐射的传输系统和设备的保护 | Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
| IEC 60079-29-1-2007 | 爆炸性环境.第29-1部分:气体探测器.易燃气体探测器的性能要求 | Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
| IEC 60079-29-2-2007 | 爆燃性环境.第29-2部分:气体探测器.易燃气体和氧用探测器的选择、安装、使用和维护 | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| IEC 60079-30-1-2007 | 易爆气体.第30-1部分:电阻丝加热.总则和试验要求 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| IEC 60079-30-2-2007 | 易爆气体.第30-2部分:电阻丝加热.设计、安装和维护应用指南 | Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance |
| IEC 60079-4 AMD 1-1995 | 爆炸性气体环境用电气设备 第4部分:引燃温度试验方法 修改1 | Electrical apparatus for explosive gas atmospheres - Part 4: Method of test for ignition temperature; Amendment 1 |
| IEC 60079-4-1975 | 爆炸性气体环境用电气设备 第4部分:引燃温度试验方法 | Electrical apparatus for explosive gas atmospheres. Part 4 : Method of test for ignition temperature |
| IEC 60079-4A-1970 | 爆炸性气体环境用电气设备 第4部分:引燃温度试验方法 补充1 | Electrical apparatus for explosive gas atmospheres. Part 4 : Method of test for ignition temperature. First supplement |
| IEC 60141-3 AMD 1-1967 | 充油电缆和压气电缆及其附件的试验 第3部分:交流电压275kV以下外压气(气体压缩)电缆及其附件 修改1 | Test on oil-filled and gas-pressure cables and their accessories. Part 3 : External gas-pressure (gas compression) cables and accessories alternating voltage up to 275 kV |
| IEC 60141-3-1963 | 充油电缆和压气电缆及其附件的试验 第3部分:交流电压275kV以下外压气(气体压缩)电缆及其附件 | Test on oil-filled and gas-pressure cables and their accessories. Part 3 : External gas-pressure (gas compression) cables and accessories alternating voltage up to 275 kV |
| IEC 60231C-1974 | 核反应堆仪表一般原则 补充3:石墨慢化气体冷却反应堆仪表 | General principles of nuclear reactor instrumentation |
| IEC 60231E-1977 | 核反应堆仪表一般原则 补充5:间接循环高温气体冷却反应堆仪表原则 | General principles of nuclear reactor instrumentation. Fifth supplement: Gascooled high temperature power reactor with indirect-cycle turbines |
| IEC 60335-2-102-2004 | 家用和类似用途电器的安全.第2-102部分:有电连接的气体、油和固体燃烧燃烧设备的特殊要求 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| IEC 60512-11-14-2003 | 电子设备用连接器.试验和测量.第11-14部分:气候试验.试验11p:流动单气体腐蚀试验 | Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests; Test 11p: Flowing single gas corrosion test |
| IEC 60512-11-7-2003 | 电子设备用连接器.试验和测量方法.第11-7部分:气候试验.试验11g:流动混合气体腐蚀试验 | Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests; Test 11g: Flowing mixed gas corrosion test |
| IEC 60567-2005 | 充油电气设备.分析游离气体和溶解气体用气体和油的取样.指南 | Oil-filled electrical equipment - Sampling of gases and of oil for the analysis of free and dissolved gases - Guidance |
| IEC 60599 AMD 1-2007 | 使用中的浸渍矿物油的电气设备.溶解和游离气体分析的解释指南.修改件1 | Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis; Amendment 1 |
| IEC 60599 Edition 2.1-2007 | 使用中的浸渍矿物油的电气设备.溶解和游离气体分析结果解释的指南 | Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis |
| IEC 60599-1999 | 使用中的浸渍矿物油的电气设备 溶解和游离气体分析结果解释的导则 | Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis |
| IEC 60730-2-17 AMD 1-2000 | 家用和类似用途的自动电气控制.第2-17部分:电气操作气体阀门的特殊要求,包括机械要求.修改件1 | Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements; Amendment 1 |
| IEC 60749-7 Corrigendum 1-2003 | 半导体器件.机械和气候试验方法.第7部分:其他残余气体的分析和内部含水量的测量 | Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases |
| IEC 60749-7-2002 | 半导体器件.机械和气候试验方法.第7部分:其他残余气体的分析和内部水分含量的测量 | Semiconductor devices - Mechanical and climatic test methods - Part 7: Internal moisture content measurement and the analysis of other residual gases |
| IEC 60754-1-1994 | 电缆燃烧时释出的气体的试验 第1部分:氢卤酸气体量的测定 | Test on gases evolved during combustion of materials from cables; part 1: determination of the amount of halogen acid gas |
| IEC 60754-2 AMD 1-1997 | 电缆燃烧时释出的气体的试验 第2部分:通过测量pH值和电导率来测定在取自电缆的材料燃烧时释出的气体的酸度 | Test on gases evolved during combustion of electric cables - Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity; Amendment 1 |
| IEC 60754-2-1991 | 电缆燃烧时释出的气体的试验 第2部分:通过测量pH值和电导率来测定在取自电缆的材料燃烧时释出的气体的酸度 | Test on gases evolved during combustion of electric cables; part 2: determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity |
| IEC 60761-3-2002 | 气态排出流放射性连续监视设备.第3部分:惰性气体排出流监视仪的特殊要求 | Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 3: Specific requirements for radioactive noble gas monitors |
| IEC 60951-2-1988 | 核电厂事故和事故后的辐射监测设备 第2部分:气态排出物中放射性惰性气体的连续监测设备 | Radiation monitoring equipment for accident and post-accident conditions in nuclear power plants. Part 2: Equipment for continously monitoring radioactive noble gases in gaseous effluents |
| IEC 60974-8-2004 | 弧焊设备.第8部分:焊接和等离子切割系统用气体控制台 | Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems |
| IEC 61181-2007 | 填充矿物油的电气设备.溶解气体分析(DGA)用于电气设备工厂试验 | Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment |
| IEC 61207-1-1994 | 气体分析器性能表示 第1部分:总则 | Expression of performance of gas analyzers; part 1: general |
| IEC 61207-2 Corrigendum 1-1994 | 气体分析器性能表示.第2部分:气体中的氧(利用高温电化学传感器) | Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) |
| IEC 61207-2-1994 | 气体分析器性能表示 第2部分:气体中的氧(利用高温电化学传感器) | Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) |
| IEC 61207-3 Corrigendum 1-2003 | 气体分析器.性能表示.第3部分:顺磁氧气分析器 | Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| IEC 61207-3 Corrigendum 2-2003 | 气体分析器.性能表示.第3部分:顺磁氧气分析器 | Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| IEC 61207-3-2002 | 气体分析器.性能表示.第3部分:顺磁氧气分析器 | Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| IEC 61207-6-1994 | 气体分析器性能表示 第6部分:光度分析器 | Expression of performance of gas analyzers; part 6: photometric analyzers |
| IEC 61347-2-10-2000 | 灯的控制装置 第2-10部分:高频冷起动管形气体放电灯(霓虹灯管)用电子逆变器和变流器的特殊要求 | Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) |
| IEC 61347-2-9 Edition 1.1-2003 | 灯的控制装置.第2-9部分:气体放电灯(荧光灯除外)用镇流器的特殊要求 | Lamp controlgear - Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) |
| IEC 61347-2-9-2000 | 灯的控制装置 第2-9部分:气体放电灯(荧光灯除外)用镇流器的特殊要求 | Lamp controlgear - Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) |
| IEC 62035-1999 | 气体放电灯(荧光灯除外) 安全规范 | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
| IEC 62086-1 Corrigendum 1-2003 | 爆炸性气体环境用电气设备.电阻轻微加热.第1部分:一般要求和测试要求 | Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements |
| IEC 62259-2003 | 含碱或其他非酸性电解质的蓄电池和蓄电池组.部分气体复合的镍镉柱状二次单电池 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination |
| IEC 62271-203-2003 | 高压开关设备和控制设备.第203部分:额定电压为52kV以上的气体绝缘金属封闭式开关设备 | High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| IEC 62271-207-2007 | 高压开关装置和控制装置.第207部分:额定电压大于52kV气体绝缘开关装置组件用抗地震能力 | High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV |
| IEC 62271-209-2007 | 高压开关装置和控制装置.第209部分:额定电压52kV以上的气体绝缘金属外壳开关装置用电缆连接件.充液和挤压绝 | High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations |
| IEC 62302-2007 | 辐射防护仪器.放射性惰性气体的取样和监测用设备 | Radiation protection instrumentation - Equipment for sampling and monitoring radioactive noble gases |
| IEC/TR 60079-12-1978 | 爆炸性气体环境用电气设备 第12部分:气体或蒸汽与空气的混合物按其最大实验安全间隙和最小引燃电流的分类 | Electrical apparatus for explosive gas atmospheres. Part 12 : Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents |
| IEC/TR 60079-13-1982 | 爆炸性气体环境用电气设备 第13部分:正压保护的房间或建筑物的结构和使用 | Electrical apparatus for explosive gas atmospheres. Part 13 : Construction and use of rooms or buildings protected by pressurization |
| IEC/TR 60079-16-1990 | 爆炸性气体环境用电气设备 第16部分:保护分析仪器房屋的人工通风 | Electrical apparatus for explosive gas atmospheres; part 16: artificial ventilation for the protection of analyzer(s) houses |
| IEC/TR 61010-3-042-1999 | 测量、控制及实验室用电气设备的安全要求 第3-042部分:IEC 61010-2-042:1997《医疗材料处理和实验室加工用 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-042: Conformity verification report for IEC 61010-2-042:1997 - Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes |
| IEC/TR 61010-3-043-2001 | 测量、控制和实验室用电气设备的安全要求 第3-043部分：IEC61010-2-043：1997《医疗材料处理和实验室加工 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-043: Conformity verification report for IEC 61010-2-043:1997; Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials and for laboratory processes |
| IEC/TR 61081-1991 | 由过程伴生气体驱动的气动仪器 安全安装和操作程序 指南 | Pneumatic instruments driven by associated process gas; safe installation and operating procedures; guidelines |
| IEC/TR2 61464 Corrigendum 1-2003 | 绝缘套管.油作为主绝缘(普通纸)浸渍介质的套管中溶解气体分析(DGA)的说明指南 | Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the main insulation (generally paper) |
| IEC/TR2 61464-1998 | 绝缘套管 油作为主绝缘(普通纸)浸渍介质的套管中溶解气体分析(DGA)的说明指南 | Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the main insulation (generally paper) |
| IEC/TR2 61639-1996 | 额定电压72 5kV及以上气体绝缘金属封闭开关设备和电力变压器之间的直接连接 | Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above |
| IEC/TR2 61640-1998 | 额定电压72 5kV及以上的高压气体绝缘硬输电线 | Rigid high-voltage, gas-insulated transmission lines for rated voltage of 72,5 kV and above |
| IEC/TR3 60079-20-1996 | 爆炸性气体环境用电气设备 第20部分:与电气设备的使用有关的可燃性气体和蒸气的数据 | Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus |
| ISO 10062-2006 | 人工环境中特低浓度污染气体的腐蚀试验 | Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) |
| ISO 10083-2006 | 医用气体管道系统用浓缩氧气供应系统 | Oxygen concentrator supply systems for use with medical gas pipeline systems |
| ISO 10156-1996 | 气体和气体混合物 为选择气瓶阀出气口测定气体的潜在燃烧性和氧化能力 | Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets |
| ISO 10156-2-2005 | 储气瓶.气体和气体混合物.第2部分:有毒和腐蚀性气体和气体的氧化性的测定 | Gas cylinders - Gases and gas mixtures - Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures |
| ISO 10298-1995 | 气体或混合气体的毒性测定 | Determination of toxicity of a gas or gas mixture |
| ISO 10381-7-2005 | 土质.取样.第7部分:土壤气体取样指南 | Soil quality - Sampling - Part 7: Guidance on sampling of soil gas |
| ISO 10396-2007 | 固定源排放.固定安装的监测系统自动测定气体排放浓度的抽样 | Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems |
| ISO 10439-2002 | 石油、化学和气体工业.离心压缩机 | Petroleum, chemical and gas service industries - Centrifugal compressors |
| ISO 10442-2002 | 石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors |
| ISO 10524-1-2006 | 医用气体设备用的压力调节器.第1部分:压力调节器和带流量计的压力调节器 | Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices |
| ISO 10524-2-2005 | 医用气体用压力调节器.第2部分:进气压力调节器和线性压力调节器 | Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators |
| ISO 10524-3-2005 | 医用气体设备用的压力调节器.第3部分:带气瓶阀的压力调节器 | Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves |
| ISO 10651-5-2006 | 医用肺通气机.基本安全和性能的特殊要求.第5部分:气体驱动急救人工呼吸器 | Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 5: Gas-powered emergency resuscitators |
| ISO 10720-1997 | 钢和铁 氮含量的测定 惰性气体流中熔解物的热传导法 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas |
| ISO 10790 AMD 1-2003 | 封闭导管中液体流量的测量.科里奥利计的选择、安装和使用指南(流量、密度和容量的测量).修改1:气体测量指南 | Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements); Amendment 1: Guidance for gas measurement |
| ISO 10882-1-2001 | 焊接和相关工艺的卫生和安全 操作人员呼吸区域的空气中悬浮颗粒物及气体的取样 第1部分：空气中悬浮颗粒 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles |
| ISO 10882-2-2000 | 焊接和相关工艺的卫生与安全 工作人员呼吸区域中空气中悬浮颗粒物及气体的取样 第2部分:气体取样 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases |
| ISO 11114-1-1997 | 移动气瓶 气瓶和瓶阀材料与盛装气体的相容性 第1部分:金属材料 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials |
| ISO 11114-2-2000 | 移动气瓶 气瓶和瓶阀材料与盛装气体的相容性 第2部分:非金属材料 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials |
| ISO 11114-3-1997 | 移动气瓶 气瓶和瓶阀材料与盛装气体的相容性 第3部分:氧环境中自燃试验 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere |
| ISO 11114-4-2005 | 移动气瓶.气瓶和瓶阀材料与盛装气体的相容性.第4部分:选择抗氢脆金属材料的试验方法 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement |
| ISO 11195-1995 | 医用气体混合器 独立气体混合器 | Gas mixers for medical use - Stand-alone gas mixers |
| ISO 11755-2005 | 储气瓶.集装压缩气体和液化气体气瓶(乙炔除外).充装时的检验 | Gas cylinders - Cylinder bundles for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling |
| ISO 1183-3-1999 | 塑料 非泡沫塑料的密度测定方法 第3部分:气体比重瓶法 | Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method |
| ISO 11933-4-2001 | 密封箱室部件 第4部分：通风和气体清洁系统，诸如：过滤器、捕获器、安全和调节阀、控制和保护器件 | Components for containment enclosures - Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices |
| ISO 12569-2000 | 建筑物热性能 建筑物的换气率测定 示踪气体稀释法 | Thermal performance of buildings - Determination of air change in buildings - Tracer gas dilution method |
| ISO 13338-1995 | 气体和气体混合物的腐蚀性测定 | Determination of tissue corrosiveness of a gas or gas mixture |
| ISO 13631-2002 | 石油和天然气工业.包装用往复式气体压缩机 | Petroleum and natural gas industries - Packaged reciprocating gas compressors |
| ISO 13641-1-2003 | 水质.厌气菌的气体生成的抑制测定.第1部分:一般试验 | Water quality - Determination of inhibition of gas production of anaerobic bacteria - Part 1: General test |
| ISO 13641-2-2003 | 水质.厌气菌的气体生成的抑制测定.第2部分:低生物量浓度试验 | Water quality - Determination of inhibition of gas production of anaerobic bacteria - Part 2: Test at low biomass concentrations |
| ISO 14064-1-2006 | 温室气体.第1部分:温室气体辐射和消除的量化和报告规范与组织级指南 | Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals |
| ISO 14064-2-2006 | 温室气体.第2部分:温室气体辐射降低或消除增强的量化、监测和报告的规范与设计级指南 | Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements |
| ISO 14064-3-2006 | 温室气体.第3部分:温室气体确定的证实和验证的规范与指南 | Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions |
| ISO 14065-2007 | 温室气体.认证或承认的其他形式用温室气体确认和验证机构的要求 | Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition |
| ISO 14164-1999 | 固定源排放 管道路气体流速的测定 自动监测方法 | Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method |
| ISO 14175-1997 | 焊接耗材 弧焊及切割用保护气体 | Welding consumables - Shielding gases for arc welding and cutting |
| ISO 14341-2002 | 焊料.非合金钢和细粒钢金属气体保护焊用焊丝和溶敷金属.分类 | Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification |
| ISO 14344-2002 | 焊接和有关处理.焊剂和气体保护弧焊法.消耗品的采购导则 | Welding and allied processes - Flux and gas shielded electrical welding processes - Procurement guidelines for consumables |
| ISO 14520-1 Technical Corrigendum 1-2007 | 气体灭火系统.物理特性和系统设计.第1部分:一般要求.技术勘误1 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 1: General requirements; Technical Corrigendum 1 |
| ISO 14520-1-2006 | 气体灭火系统.物理特性和系统设计.第1部分:一般要求 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 1: General requirements |
| ISO 14520-10-2005 | 气体灭火系统.物理特性和系统设计.第10部分:HFC 23灭火剂 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 10: HFC 23 extinguishant |
| ISO 14520-11-2005 | 气体灭火系统.物理特性和系统设计.第11部分:HFC 236fa灭火剂 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 11: HFC 236fa extinguishant |
| ISO 14520-12-2005 | 气体灭火系统.物理特性和系统设计.第12部分:IG-01灭火剂 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 12: IG-01 extinguishant |
| ISO 14520-13-2005 | 气体灭火系统.物理特性和系统设计.第13部分:IG-100灭火剂 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 13: IG-100 extinguishant |
| ISO 14520-14-2005 | 气体灭火系统.物理特性和系统设计.第14部分:IG-55灭火剂 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 14: IG-55 extinguishant |
| ISO 14520-15-2005 | 气体灭火系统.物理特性和系统设计.第15部分:IG-541灭火剂 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 15: IG-541 extinguishant |
| ISO 14520-2-2006 | 气体灭火系统.物理特性和系统设计.第2部分:CF3I灭火剂 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 2: CF3I extinguishant |
| ISO 14520-5-2006 | 气体灭火系统.物理特性和系统设计.第5部分:FK-5-1-12灭火剂 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 5: FK-5-1-12 extinguishant |
| ISO 14520-6-2006 | 气体灭火系统.物理特性和系统设计.第6部分:HCFC混合A的灭火剂 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 6: HCFC Blend A extinguishant |
| ISO 14520-8-2006 | 气体灭火系统.物理特性和系统设计.第8部分:HFC 125灭火剂 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 8: HFC 125 extinguishant |
| ISO 14520-9-2006 | 气体灭火系统.物理特性和系统设计.第9部分:HFC 227ea灭火剂 | Gaseous fire-extinguishing systems - Physical properties and system design - Part 9: HFC 227ea extinguishant |
| ISO 14531-1-2002 | 塑料管道和配件.气体燃料运输用交联聚乙烯管道系统.米制系列.第1部分:管 | Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 1: Pipes |
| ISO 14531-2-2004 | 塑料管道和配件.气体燃料运输用交联聚乙烯管道系统.米制系列.规范.第2部分:热熔连接用配件 | Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 2: Fittings for heat-fusion jointing |
| ISO 14531-3-2006 | 塑料管道和配件.气体燃料运输用交联聚乙烯管道系统.米制系列.规范.第3部分:机械连接用配件(包括PE-X/金属转 | Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 3: Fittings for mechanical jointing (including PE-X/metal transitions) |
| ISO 14531-4-2006 | 塑料管道和配件.气体燃料运输用交联聚乙烯(PE-X)管道系统.米制系列.规范.第4部分:系统设计和安装指南 | Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Part 4: System design and installation guidelines |
| ISO 14661 AMD 1-2002 | 工业用热涡轮机(蒸汽涡轮机、气体膨胀式轮机).一般要求.修改件A1:工业用热涡轮机数据表 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) - General requirements; Amendment A1: Data sheets for thermal turbines for industrial applications |
| ISO 14912-2003 | 气体分析.气体混合成份数据的转换 | Gas analysis - Conversion of gas mixture composition data |
| ISO 1496-3 AMD 1-2006 | 货运集装箱系列1.规范和试验.第3部分:液体、气体和加压的干散料用液罐集装箱.修改件1:外部限制(纵向)动态试 | Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids, gases and pressurized dry bulk; Amendment 1: Testing of the external restraint (longitudinal) dynamic |
| ISO 1496-3-1995 | 系列1集装箱 技术要求与试验 第3部分:液体、气体及加压干散货用罐式集装箱 | Series 1 freight containers - Specification and testing - Part 3: Tank containers for liquids, gases and pressurized dry bulk |
| ISO 15002-2000 | 医用气体管道系统终端装置用气流量测量装置 | Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| ISO 15011-1-2002 | 焊接和有关过程中的健康和安全.电弧焊接产生的取样烟尘和气体的实验室方法.第1部分:颗粒烟尘分析的排放率测 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 1: Determination of emission rate and sampling for analysis of particulate fume |
| ISO 15011-2-2003 | 焊接和相关工艺中的保健和安全.对电弧焊产生的烟尘和气体取样的实验室方法.第2部分:除臭氧外气体的排放率的 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 2: Determination of emission rates of gases, except ozone |
| ISO 15011-4-2006 | 焊接和相关工艺的卫生和安全.烟尘和气体取样的实验室方法.第4部分:烟尘数据单 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets |
| ISO 15105-2-2003 | 塑料.薄膜和薄板.气体传输率的测定.第2部分:等压法 | Plastics - Film and sheeting - Determination of gas transmission rate - Part 2: Equal-pressure method |
| ISO 15351-1999 | 钢铁.氮含量的测定.惰性气体熔融热导法(常规方法) | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| ISO 15500-7-2002 | 道路车辆.压缩天然气(CNG)燃料系统元部件.第7部分:气体喷射器 | Road vehicles - Compressed natural gas (CNG) fuel system components - Part 7: Gas injector |
| ISO 15616-3-2003 | 高质量焊接和切割用CO2激光射线机的验收试验.第3部分:气体流量和压力测量仪的校正 | Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure |
| ISO 15741-2001 | 色漆和清漆 海上和近海的非腐蚀气体钢管内侧的减小摩擦涂层 | Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases |
| ISO 15796-2005 | 气体分析.分析偏差的调查和处理 | Gas analysis - Investigation and treatment of analytical bias |
| ISO 15860-2006 | 航天系统.气体污染.现场试验测量方法 | Space systems - Gas contamination - Measurement methods for field tests |
| ISO 15901-1 Technical Corrigendum 1-2007 | 用水银孔率法和气体吸附法测定固体材料的孔隙尺寸分布和孔隙率.第1部分:水银孔率测量法.技术勘误1 | Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry; Technical corrigendum 1 |
| ISO 15901-1-2005 | 用水银孔率法和气体吸附法测定固体材料的孔隙尺寸分布和孔隙率.第1部分:水银孔率测量法 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry |
| ISO 15901-2 Technical Corrigendum 1-2007 | 用水银孔率法和气体吸附法测定固体材料孔径分布和孔隙率.第2部分:用气体吸附法分析介孔和微孔.技术勘误1 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of mesopores and macropores by gas adsorption; Technical Corrigendum 1 |
| ISO 15901-2-2006 | 用水银孔率法和气体吸附法测定固体材料的孔隙尺寸分布和孔隙率.第2部分:用气体吸附法分析中孔和大孔 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of mesopores and macropores by gas adsorption |
| ISO 15901-3-2007 | 用水银孔率法和气体吸附法测定固体材料的孔径分布和孔隙率.第3部分:用气体吸附法分析微孔 | Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 3: Analysis of micropores by gas adsorption |
| ISO 16010-2005 | 弹性密封件.传送气体燃料和烃类液体的管和配件用密封件的材料要求 | Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids |
| ISO 16183-2002 | 重型机车.未处理排气的气体排放测量和瞬变试验条件下用部分流体稀释系统测量粒子排放 | Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions |
| ISO 16664-2004 | 气体分析.校正气体和气体混合物的处理.指南 | Gas analysis - Handling of calibration gases and gas mixtures - Guidelines |
| ISO 16834-2006 | 焊接消耗品.高强度钢的气体保护电弧焊用焊丝电极、焊丝、焊条和沉积金属.分类 | Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification |
| ISO 1691-1976 | 工业用硅酸钠和硅酸钾 碳酸盐含量的测定 气体容积法 | Sodium and potassium silicates for industrial use; Determination of carbonates content; Gas-volumetric method |
| ISO 17053-2005 | 钢铁.氧的测定.在惰性气体中熔化后的红外法 | Steel and iron - Determination of oxygen - Infrared method after fusion under inert gas |
| ISO 17353-2004 | 水质.选择的有机化合物的测定.气体色谱法 | Water quality - Determination of selected organotin compounds - Gas chromatographic method |
| ISO 17491-2002 | 防护服.对气态和液态化学品的防护.防护服耐气体和液体穿透性的测定 | Protective clothing - Protection against gaseous and liquid chemicals - Determination of resistance of protective clothing to penetration by liquids and gases |
| ISO 17632-2004 | 焊接消耗品.非合金钢及细粒钢气体保护的和非气体保护金属弧焊用药芯电极.分类 | Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification |
| ISO 17633-2004 | 焊接消耗品.不锈钢和耐热钢的气体保护和非气体保护金属弧焊用药芯电极和焊条.分类 | Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification |
| ISO 17634-2004 | 焊接消耗品.耐蠕变钢的气体保护金属电弧焊用管状有芯焊条.分类 | Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification |
| ISO 18054-2004 | 鸢尾根茎油.铁含量的测定.毛细管柱气体色谱法 | Oils of orris rhizome (Iris pallida Lam. or Iris germanica L.) - Determination of irone content - Method using gas chromatography on a capillary column |
| ISO 18276-2005 | 焊接消耗品.高强度钢的气体保护和非气体保护金属极电弧焊用药芯电极.分类 | Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification |
| ISO 18757-2003 | 细陶瓷(高级陶瓷、高级工业陶瓷).利用BET法通过气体吸收率测定陶瓷粉末的比表面积 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method |
| ISO 19702-2006 | 燃烧废物的毒性试验.用FTIR气体分析对燃烧废气中气体和蒸气的分析指南 | Toxicity testing of fire effluents - Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis |
| ISO 19703-2005 | 燃烧中有毒气体的生成和分析.实验室燃烧中物质产生、当量比和燃烧效率的计算 | Generation and analysis of toxic gases in fire - Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires |
| ISO 21010-2004 | 低温容器.气体/材料相容性 | Cryogenic vessels - Gas/materials compatibility |
| ISO 21207-2004 | 人工气候下的腐蚀试验.包括交替暴露于腐蚀促进气体、中性盐雾和干燥中的加速腐蚀试验 | Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying |
| ISO 21687-2007 | 铝生产用含碳材料.以氮作为分析气体用比重测量法(测定体积的)测定密度.固体材料 | Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials |
| ISO 21969-2005 | 同医疗气体设备一起使用的高压挠性连接 | High-pressure flexible connections for use with medical gas systems |
| ISO 23550-2004 | 气体燃烧器和燃气设备的安全和控制设备.一般要求 | Safety and control devices for gas burners and gas-burning appliances - General requirements |
| ISO 23551-1-2006 | 气体燃烧器和燃气设备用安全和控制装置.特殊要求.第1部分:自动阀门 | Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 1: Automatic valves |
| ISO 23551-2-2006 | 气体燃烧器和燃气设备用安全和控制装置.特殊要求.第2部分:压力调节器 | Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 2: Pressure regulators |
| ISO 23551-3-2005 | 气体燃烧器和燃气设备用安全和控制设备.特殊要求.第3部分:气动型燃气/空气比率控制器 | Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 3: Gas/air ratio controls, pneumatic type |
| ISO 23551-4-2005 | 气体燃烧器和燃气设备用安全和控制设备.特殊要求.第4部分:自动截止阀的阀门检验系统 | Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 4: Valve-proving systems for automatic shut-off valves |
| ISO 23552-1-2007 | 气和/或油燃烧器及气和/或油器具用安全和控制装置.特殊要求.第1部分:电子型燃料/气体比率控制 | Safety and control devices for gas and/or oil burners and gas and/or oil appliances - Particular requirements - Part 1: Fuel/air ratio controls, electronic type |
| ISO 2743-1986 | 釉瓷和搪瓷 耐盐酸气体冷凝腐蚀性的测定 | Vitreous and porcelain enamels; Determination of resistance to condensing hydrochloric acid vapour |
| ISO 32-1977 | 医用气瓶 瓶内气体识别标志 | Gas cylinders for medical use; Marking for identification of content |
| ISO 3427-1976 | 气体卤代烃(液化气) 取样 | Gaseous halogenated hydrocarbons (liquefied gases); Taking of a sample |
| ISO 3649-1980 | 空气或其他气体的净化设备 词汇 两种语言版 | Cleaning equipment for air or other gases; Vocabulary Bilingual edition |
| ISO 4524-2-2000 | 金属覆盖层 金和金合金电镀层的试验方法 第2部分:混合流动气体(MFG)环境试验 | Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 2: Mixed flowing gas (MFG) environmental tests |
| ISO 5145 AMD 1-2006 | 气体和混合气体用气瓶阀出气口.选择和尺寸.修改件1：医用气体气瓶阀出气口 | Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning; Amendment 1: Cylinder valve outles for gases for medical use |
| ISO 5145-2004 | 气体和混合气体气瓶瓶阀出气口.选择和尺寸 | Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning |
| ISO 5359-2000 | 医用气体用低压软管组件 | Low-pressure hose assemblies for use with medical gases |
| ISO 5918-1982 | 工业用氯氟化烃 惰性气体含量的测定 气相色谱法 一般原则 | Chlorofluorohydrocarbons for industrial use; Determination of inert gas content; Gas chromatographic method; General principles |
| ISO 6141-2000 | 气体分析 标定气体和混合气体合格证书要求 | Gas analysis - Requirements for certificates for calibration gases and gas mixtures |
| ISO 6142-2001 | 气体分析 标定用混合气体的制备 称重法 | Gas analysis - Preparation of calibration gas mixtures - Gravimetric method |
| ISO 6143-2001 | 气体分析 测定并检查标定用混合气体成分的比较方法 | Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures |
| ISO 6144-2003 | 气体分析.标定用混合气体的制备.静态容量法 | Gas analysis - Preparation of calibration gas mixtures - Static volumetric method |
| ISO 6145-1-2003 | 气体分析.动态容量法制备标定用混合气体.第1部分:校正方法 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration |
| ISO 6145-10-2002 | 气体分析.用动态容积法标定气体混合物的准备.第10部分:渗透法 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method |
| ISO 6145-11-2005 | 气体分析.动态容量法制备标定用气体混合物.第11部分:电化学生成法 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation |
| ISO 6145-2-2001 | 气体分析 用动态容量法制备标定用混合气体 第2部分：容量泵 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 2: Volumetric pumps |
| ISO 6145-4-2004 | 气体分析.用动态容量法制备标定用混合气体.第4部分:持续喷射器注入法 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method |
| ISO 6145-5-2001 | 气体分析 用动态容量法制备标定用混合气体 第5部分：毛细管校准仪器 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices |
| ISO 6145-6-2003 | 气体分析.动态容量法制备校准用混合气体.第6部分:临界声孔 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices |
| ISO 6145-7-2001 | 气体分析 用动态容量法制备标定用混合气体 第7部分：热质流控制仪 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers |
| ISO 6145-8-2005 | 气体分析.用动态容积法制备标定用气体混合物.第8部分:扩散法 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method |
| ISO 6145-9 Technical Corrigendum 1-2002 | 气体分析.用动态容积法标定气体混合物的制备.第9部分:饱和法.技术勘误 1 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method; Technical Corrigendum 1 |
| ISO 6145-9-2001 | 气体分析 用动态容量法制备标定用混合气体 第9部分：饱和法 | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method |
| ISO 6184-2-1985 | 抑爆系统 第2部分:空气中易燃气体爆炸指数的测定 | Explosion protection systems; Part 2 : Determination of explosion indices of combustible gases in air |
| ISO 6184-3-1985 | 抑爆系统 第3部分:除粉尘/空气和气体/空气混合物以外的燃料/空气混合物爆炸指数的测定 | Explosion protection systems; Part 3 : Determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures |
| ISO 6327-1981 | 气体分析 天然气水露点的测定 用表面冷凝湿度计测定 | Gas analysis; Determination of the water dew point of natural gas; Cooled surface condensation hygrometers |
| ISO 636-2004 | 焊接消耗品.非合金钢和细粒钢的钨惰性气体焊用焊条、焊丝和溶敷金属.分类 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification |
| ISO 6529-2001 | 防护服 化学品的防护 防护服耐液体和气体渗透性的测定 | Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases |
| ISO 6551-1982 | 石油液体和气体 动态测量的精度和可靠性 电脉冲数据和/或电子脉冲数据的电缆传输 | Petroleum liquids and gases; Fidelity and security of dynamic measurement; Cabled transmission of electric and/or electronic pulsed data |
| ISO 6584-1981 | 空气及其他气体的净化设备 除尘器的分类 | Cleaning equipment for air and other gases; Classification of dust separators |
| ISO 6855-1983 | 道路车辆 装有控制点火发动机装置的机动自行车排出气体污染物的测量方法 | Road vehicles; Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine |
| ISO 6993-1-2006 | 输送气体燃料用埋设的、高耐冲击的聚氯乙烯(PVC-HI)管道.第1部分:最大操作压力为1巴(100 kPa)的管子 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) |
| ISO 6993-2-2006 | 输送气体燃料用埋设的、高耐冲击的聚氯乙烯(PVC-HI)管道.第2部分:最大操作压力为200mbar(20 kPa)的管件 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa) |
| ISO 6993-3-2006 | 输送气体燃料用埋设的、高耐冲击的聚氯乙烯(PVC-HI)管道.第3部分:最大操作压力为1巴(100 kPa)的管件和鞍座 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa) |
| ISO 6993-4-2006 | 输送气体燃料用埋设的、高耐冲击的聚氯乙烯(PVC-HI)管道.第4部分:设计、操作和安装的实施规程 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels - Part 4: Code of practice for design, handling and installation |
| ISO 7396-1-2007 | 医用气体管道系统.第1部分:压缩的医用气体和真空用管道系统 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum |
| ISO 7396-2-2007 | 医用气体管道系统.第2部分:麻醉用气体净化处理系统 | Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems |
| ISO 7504-2001 | 气体分析 词汇 | Gas analysis - Vocabulary |
| ISO 7589-2002 | 气体分析.用动态容积法标定气体混合物.第10部分:渗透法 | Photography - Illuminants for sensitometry - Specifications for daylight, incandescent tungsten and printer |
| ISO 8085-1-2001 | 输送气体燃料的聚乙烯管用的聚乙烯管件 公制系列 规范 第1部分：采用加热工具的插口熔接管件 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 1: Fittings for socket fusion using heated tools |
| ISO 8085-2 Technical Corrigendum 1-2001 | 输送气体燃料的聚乙烯管用的聚乙烯管件 公制系列 规范 第2部分：对熔接、采用加热工具的插口熔接以及用 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings; Technical Corrigendum 1 |
| ISO 8085-2-2001 | 输送气体燃料的聚乙烯管用的聚乙烯管件 公制系列 规范 第2部分：对熔接、采用加热工具的插口熔接以及用 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings |
| ISO 8085-3 Technical Corrigendum 1-2007 | 输送气体燃料的聚乙烯管用聚乙烯配件.米制系列.规范.第3部分:电熔配件.技术勘误1 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series - Specifications - Part 3: Electrofusion fittings; Technical Corrigendum 1 |
| ISO 8085-3-2001 | 输送气体燃料的聚乙烯管用的聚乙烯管件 公制系列 规范 第3部分：电熔接管件 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 3: Electrofusion fittings |
| ISO 8130-2-1992 | 粉末涂料 第2部分:用气体比较比重瓶测定密度 | Coating powders; part 2: determination of density by gas comparison pyknometer (referee method) |
| ISO 8178-2-1996 | 往复式内燃机 排放测量 第2部分:气体和颗粒排放物的现场测量 | Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site |
| ISO 8573-6-2003 | 压缩空气.第6部分:气体污染物含量的试验方法 | Compressed air - Part 6: Test methods for gaseous contaminant content |
| ISO 8835-3-2007 | 吸入式麻醉剂系统.第3部分:活性麻醉气体清除系统的传输和容纳系统 | Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems |
| ISO 8846-1990 | 小艇 电气装置 周围可燃性气体防燃防护 | Small craft - Electrical devices - Protection against ignition of surrounding flammable gases |
| ISO 8974-2002 | 塑料.酚醛树脂.用气体色谱法测定残余酚的含量 | Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography |
| ISO 9170-1-1999 | 医用气体管道系统用终端设备 第1部分:供压缩医用设备和真空用的终端设备 | Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum |
| ISO 9170-2-1999 | 医用气体管道系统用终端设备 第2部分:麻醉气体清除系统用的终端设备 | Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems |
| ISO 9277-1995 | 用BET气体吸附法确定固体表面积 | Determination of the specific surface area of solids by gas adsorption using the BET method |
| ISO 9300-2005 | 用临界流量文丘里喷嘴测定气体流量 | Measurement of gas flow by means of critical flow Venturi nozzles |
| ISO 9360-1-2000 | 麻醉和呼吸设备 用于加湿人的呼吸气体的热湿交换器(HMEs) 第1部分:与250ml最小潮量一起使用的热湿交换器 | Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml |
| ISO 9360-2-2001 | 麻醉和呼吸设备 用于加湿人的呼吸气体的热湿交换器(HMEs) 第2部分：用于气管切开手术病人的最小潮气量为2 | Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml |
| ISO 9692-1-2003 | 焊接和相关工艺.关于接缝准备的建议.第1部分:钢的手动金属电弧焊接、气体保护金属电弧焊、气焊、TIG焊接和 | Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels |
| ISO 9692-3-2000 | 焊接和相关工艺 接头制备的建议 第3部分:铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| ISO 9931-1991 | 煤 直接燃煤系统中气体输送粉煤的采样方法 | Coal; sampling of pulverized coal conveyed by gases in direct fire coal systems |
| ISO 9932-1990 | 纸和纸板 薄页材料水蒸气透过率的测定 动态气流和静态气体扩散法 | Paper and board; determination of water vapour transmission rate of sheet materials; dynamic sweep and static gas methods |
| ISO 9951 Technical Corrigendum 1-1994 | 封闭管道中气体流量的测量 技术勘误1 | Measurement of gas flow in closed conduits - Turbine meters; Technical Corrigendum 1 |
| ISO 9951-1993 | 封闭管道中气体流量的测量 涡轮计 | Measurement of glas flow in closed conduits; turbine meters |
| ISO/TS 10839-2000 | 供应气体燃料的聚乙烯管材和管件 设计、搬运和安装实施规范 | Polyethylene pipes and fittings for the supply of gaseous fuels - Code of practice for design, handling and installation |
| ISO/TS 11155-2-2002 | 道路车辆.乘员舱内空气滤清器.第2部分:气体过滤试验 | Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration |
| ISO/TS 14167-2003 | 气体分析.校准混合气体使用过程中的一般质量保证.指南 | Gas analysis - General quality assurance aspects in the use of calibration gas mixtures - Guidelines |
| ISO/TS 15011-5-2006 | 焊接和相关工艺的卫生和安全.烟尘和气体取样的实验室法.第5部分:完全或部分有机材料组成的产品在焊接或切割 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials |
| ISO/TS 16922-2002 | 天然气.添味气体用导则 | Natural gas - Guidelines for odorizing gases |
| ISO/TS 18226-2006 | 塑料管材和管件.压力4 MPa(40 bar)的供气体燃料用加固热塑管道系统 | Plastics pipes and fittings - Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) |
| 编号 | 中文名称 | 英文名称 |