| 编号 | 中文名称 | 英文名称 |
|---|
| IEC 60073-2002
| 人-机接口,标记和鉴别用的基本原理和安全原则.指示设备和调节器的编码原理
| Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
|
| IEC 60535-1977
| 喷流扇和调速器
| Jet fans and regulators
|
| IEC 60665-1980
| 家用和类似用途的交流排气扇及其调速器
| A.C. electric ventilating fans and regulators for household and similar purposes
|
| IEC 60723-5-1-1993
| 通信用电感器和变压器磁芯 第5部分:分规范:用于可调电感器和变压器中的磁性氧化物磁芯的调节器 第1节:空白
| Inductor and transformer cores for telecommunications; part 5: sectional specification: adjusters used with magnetic oxide cores for use in adjustable inductors and transformers; section 1: blank detail specification; assessment level A
|
| IEC 60723-5-1993
| 通信用电感器和变压器磁芯 第5部分:分规范:用于可调电感器和变压器中的磁性氧化物磁芯的调节器
| Inductor and transformer cores for telecommunications; part 5: sectional specification: adjusters used with magnetic oxide cores for use in adjustable inductors and transformers
|
| IEC 60730-2-11-1997
| 家用和类似用途的电气自动控制器 第2-11部分:能量调节器的特殊要求
| Automatic electrical controls for household and similar use - Part 2: Particular requirements for energy regulators
|
| IEC 60879 Corrigendum 1-1992
| 电环流扇和调速器的性能与结构
| Performance and construction of electric circulating fans and regulators
|
| IEC 60879-1986
| 环流扇和调速器的性能与结构
| Performance and construction of electric circulating fans and regulators
|
| IEC 61683-1999
| 光伏系统 功率调节器 效率测量程序
| Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
|
| IEC 61800-1-1997
| 可调速电力传动系统 第1部分:一般要求 低压可调速直流电力传动系统的定额规范
| Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed d.c. power drive systems
|
| IEC 61800-2-1998
| 可调速电力传动系统 第2部分:一般要求 低压可调频交流电力传动系统的定额规范
| Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for low voltage adjustable frequency a.c. power drive systems
|
| IEC 61800-3-2004
| 可调速电力传动系统 第3部分:电磁兼容要求和特定试验方法
| Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
|
| IEC 61800-4-2002
| 可调速的电气动力驱动系统.第4部分:一般要求.大于1000V但不超过35KV交流电的交流动力驱动系统的等级规范
| Adjustable speed electrical power drive systems - Part 4: General requirements; Rating specifications for a.c. power drive systems above 1000 V a.c., and not exceeding 35 kV
|
| IEC 61800-5-1 Corrigendum 1-2003
| 可调速电力传动系统.第5-1部分:安全要求.电、热、能.技术勘误1
| Adjustable speed electrical power drive systems - Part 5-1: Safety requirements; Electrical, thermal and energy; Corrigendum 1
|
| IEC 61800-5-1-2003
| 可调速的电驱动系统.第5-1部分:安全要求.电、热及能量
| Adjustable speed electrical power drive systems - Part 5-1: Safety requirements; Electrical, thermal and energy
|
| IEC 61822-2002
| 机场的照明和信号灯的电气装置.恒流调节器
| Electrical installations for lighting and beaconing of aerodromes - Constant current regulators
|
| IEC/TR 61800-6-2003
| 可调速电力驱动系统.第6部分:负载类型和相应电流额定值的测定指南
| Adjustable speed electrical power drive systems - Part 6: Guide for determination of types of load duty and corresponding current ratings
|
| ISO 10524-1-2006
| 医用气体设备用的压力调节器.第1部分:压力调节器和带流量计的压力调节器
| Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices
|
| ISO 10524-2-2005
| 医用气体用压力调节器.第2部分:进气压力调节器和线性压力调节器
| Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
|
| ISO 10524-3-2005
| 医用气体设备用的压力调节器.第3部分:带气瓶阀的压力调节器
| Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
|
| ISO 14617-8-2002
| 图表用图形符号.第8部分:阀门和气流调节器
| Graphical symbols for diagrams - Part 8: Valves and dampers
|
| ISO 15500-10-2001
| 道路车辆 压缩天然气(CNG)燃料系统部件 第10部分:气流调节器
| Road vehicles - Compressed natural gas (CNG) fuel system components - Part 10: Gas-flow adjuster
|
| ISO 23551-2-2006
| 气体燃烧器和燃气设备用安全和控制装置.特殊要求.第2部分:压力调节器
| Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 2: Pressure regulators
|
| ISO 3046-4-1997
| 往复式内燃机 性能 第4部分:调速
| Reciprocating internal combustion engines - Part 4: Speed governing
|
| ISO 6263-1997
| 液压传动 调速阀 安装面
| Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
|
| ISO 7291-1999
| 气焊设备 用于300 bar以下的焊接、切割及相关工艺用汇流系统上的压力调节器
| Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar
|
| ISO 7292-1997
| 焊接、切割和相关工艺用气瓶流量调节器 分类和规范
| Flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification and specifications
|
| ISO 8854-1988
| 道路车辆 带调节器的交流发电机 试验方法和一般要求
| Road vehicles; alternators with regulators; test methods and general requirements
|
| 编号 | 中文名称 | 英文名称 |
|---|