| 编号 | 中文名称 | 英文名称 |
|---|
| BS 1103-1989
| 橡胶软管加强用纺织物的规范
| Specification for fabrics for the reinforcement of rubber hoses
|
| BS 1435-2-2005
| 抽油和排油用橡胶软管组件.贮存、试验和使用建议
| Rubber hose assemblies for oil suction and discharge services - Recommendations for storage, testing and use
|
| BS 1782-1951
| 消防软管接头除外的吸入软管和送水软管接头(1.5英寸至8英寸标称尺寸)规范
| Specification for couplings for suction and delivery hose (11/2 in. to 8 in. nominal sizes) other than fire hose couplings
|
| BS 1906-1952
| (标称尺寸1/8英寸-1/4英寸）软管接头(露天和水中使用)规范
| Specification for hose couplings (air and water) (1/8 in. to 11/4 in. nominal sizes)
|
| BS 2464-1954
| 汽油、石油和润滑剂用软管接头(标称尺寸 1/4英寸至 4英寸)规范
| Specification for hose couplings for petrol, oil and lubricants (3/4 in. to 4 in. nominal sizes)
|
| BS 2464-2-1969
| 石油、汽油和润滑油用软管接头规范.第2部分:高压接头
| Specification for hose couplings for petrol, oil and lubricants - High pressure couplings
|
| BS 2464-3-1968
| 汽油、石油和润滑剂用软管接头规范.第3部分:快速接头
| Specification for hose couplings for petrol, oil and lubricants - Quick-acting couplings
|
| BS 2464-4-1980
| 汽油、石油和润滑剂用软管接头规范.第4部分:欧洲型 100mm快速接头规范
| Hose couplings for petrol, oil and lubricants - Specification for 100 mm quick-acting couplings: European type
|
| BS 2952-1958
| 内燃机冷却系统用橡胶软管规范
| Specification for rubber hose for i.c. engine cooling systems
|
| BS 2F 67-1980
| 航空燃料和发动机润滑油用软管规范
| Specification for hose for aviation fuel and engine lubricating oil for aeronautical purposes
|
| BS 2M 52-1989
| 航空航天流体系统用软管、管子和配件组件的脉冲试验法
| Method for impulse testing of hydraulic hose, tubing and fitting assemblies for aerospace fluid systems
|
| BS 3169-1986
| 消防急救用卷轴胶管规范
| Specification for first aid reel hoses for fire-fighting purposes
|
| BS 3212-1991
| 液化石油气体气相与液化石油气露天装置用挠性橡皮管、橡皮软管及软管组件规范
| Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations
|
| BS 336-1989
| 消防软管接头与辅助设备的规范
| Specification for fire hose couplings and ancillary equipment
|
| BS 3492-1987
| 公路和铁路运输石油产品（包括航空燃油）油罐车软管及软管组件规范
| Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels
|
| BS 3592-1-1986
| 软管增强钢丝.第1部分:橡胶软管增强用镀覆圆和扁钢丝规范
| Steel wire for hose reinforcement - Specification for coated round and flat steel wire for rubber hose reinforcement
|
| BS 3628-1963
| 通用软管夹子(蜗杆传动式)规范
| Specification for hose clips (worm drive type) for general purpose use
|
| BS 3710-1964
| 机车及铁路车辆制动软管连接器规范
| Specification for brake hose couplings for locomotives and rolling stock
|
| BS 3746-1990
| 园艺用聚氯乙烯软管规范
| Specification for PVC garden hose
|
| BS 3F 63-1981
| 航空用低压氧气软管规范
| Specification for low pressure oxygen hose for aeronautical purposes
|
| BS 4089-1999
| 液化石油气和液化天然气用金属软管组件规范
| Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases
|
| BS 5122-1986
| 低压和中压饱和蒸汽用橡胶软管规范
| Specification for rubber hoses for low-pressure and medium-pressure saturated steam
|
| BS 5173-100-1992
| 橡胶和塑料软管及软管组件试验方法.第100部分:总则
| Method of test for rubber and plastics hoses and hose assemblies - General introduction
|
| BS 5173-102.10-1990
| 橡胶和塑料软管组件的试验方法.第102部分:液压试验.第10节:吸油和放油软管静液压试验
| Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Hydrostatic tests for oil suction and discharge hose
|
| BS 5173-102.3-1988
| 橡胶和塑料软管及软管组件试验方法.第102部分:液压试验.第3节:燃料分配泵软管体积膨胀测定
| Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of fuel-dispensing pump hoses
|
| BS 5173-102.4-1990
| 橡胶和塑料软管组件试验方法.第102部分:液压试验.第4节:液压软管体积膨胀测定
| Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of hydraulic hoses
|
| BS 5173-102.8-1987
| 橡胶和塑料软管及软管组件试验方法.第102部分:液压试验.第8节:硬质增强热塑性塑料螺旋管压力脉冲试验
| Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Pressure impulse test for rigid helix reinforced thermoplastics hoses
|
| BS 5173-103.13-1994
| 橡胶和塑料软管及软管组件试验方法.第103部分:物理试验.第13节:抗燃性测定
| Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of resistance to fire
|
| BS 5173-103.2-1990
| 橡胶和塑料软管组件的试验方法.第103部分:物理试验.第2节:软管耐磨损性测定
| Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of crush resistance of hoses
|
| BS 5173-103.6-1990
| 橡胶和塑料软管组件的试验方法.第103部分:物理试验.第6节:衬料可燃性测定
| Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of ignitability of lining
|
| BS 5173-103.7-1991
| 橡胶和塑料软管组件的试验方法.第103部分:物理试验.第7节:热塑软管用刚性聚合物螺纹钢筋耐断裂性测定
| Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of fracture resistance of rigid polymer helical reinforcement in thermoplastics hoses
|
| BS 5173-106.2-1990
| 橡胶和塑料软管组件的试验方法.第106部分:环境试验.第2节:高温老化试验一般要求
| Methods of test for rubber and plastics hoses and hose assemblies - Environmental tests - General requirements for high temperature ageing tests
|
| BS 5244-1986
| 液压橡胶软管及软管组件的使用、贮藏及寿命期限推荐标准
| Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies
|
| BS 5306-1-2006
| 房屋用灭火装置及设备的实施规则.软管卷盘和泡沫引入口
| Code of practice for fire extinguishing installations and equipment on premises - Hose reels and foam inlets
|
| BS 5315-1991
| 通用软管夹子(蜗杆驱动型)(米制系列)
| Hose clamps (worm drive type) for general purpose use (metric series)
|
| BS 5342-1985
| 高压饱和蒸汽橡胶管规范
| Specification for rubber hoses for high-pressure saturated steam
|
| BS 5667-5-1979
| 连续式机械装卸设备规范.安全性要求.第5部分:松散物料:气动装卸用连接器与软管件
| Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: couplings and hose components used in pneumatic handling
|
| BS 5842-1980
| 船坞、道路及油轮用热塑性软管组件规范
| Specification for thermoplastic hose assemblies for dock, road and tanker use
|
| BS 6130-1-1993
| 地沥青及沥青用软管及软管部件.第1部分:金属软管及软管部件规范
| Hose and hose assemblies for asphalt and bitumen - Specification for flexible metallic hose and hose assemblies
|
| BS 6391-1983
| 灭火用无渗漏排水扁形软管与软管组件规范
| Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes
|
| BS 6501-1-2004
| 金属软管组件.波纹形软管组件的构造和使用指南
| Metal hose assemblies - Guidance on the construction and use of corrugated hose assemblies
|
| BS 669-1-1989
| 燃气灶具用软管、管接头和承窩接口.第1部分:采用第1、2类燃气的家用灶具用带绕金属软管、护罩、接头配件和
| Flexible hoses, end fittings and sockets for gas burning appliances - Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases
|
| BS 669-2-1997
| 燃气灶具用软管、接头和管座.第2部分:使用第1、2类燃气的家用灶具波纹金属软管、封盖、接头和管座规范
| Flexible hoses, end fittings and sockets for gas burning appliances - Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st , 2nd and 3rd family gases
|
| BS 6920-2.2.2-2000
| 根据非金属产品对水质影响人接触类消耗水要求用水的非金属产品的适宜性.带臭气和香料的水.通过软管、合成管
| Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Odour and flavour of water - Method of testing odours and flavours imparted to water by hoses and composite pipes and tubes
|
| BS 6920-2.2.3-2000
| 通过其对水质的影响确定与人类用水接触的非金属产品的适用性.试验方法.水的气味和味道.为食品和饮用水制备
| Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Odour and flavour of water - Method of testing tastes imparted to water by hoses for conveying water for food and drink preparation
|
| BS 7379-1991
| 塑料/金属叠层可涨缩软管规范
| Specification for plastics/metal laminate collapsible tubes
|
| BS 8451-2004
| 气焊切割和相关工艺用橡胶软管.高度耐扭结重型焊接软管(H型).规范
| Rubber hoses for gas welding, cutting and allied processes - High kink-resistant heavy duty welding hose (type H) - Specification
|
| BS AU 110a-1995
| 自动气压制动系统用橡胶软管和软管组件规范
| Specification for rubber hoses and hose assemblies for automotive air pressure braking systems
|
| BS EN 10324-2005
| 钢丝和钢丝制品.软管加筋钢丝
| Steel wire and wire products - Hose reinforcement wire
|
| BS EN 1113-1997
| 卫生开关龙头用淋浴器软管
| Shower hoses for (PN 10) sanitary tapware
|
| BS EN 12083-1998
| 呼吸保护装置.带呼吸软管的过滤器(无面具装配).颗粒过滤器、气体过滤器及颗粒与气体过滤器.要求、试验、标
| Respiratory protective devices - Filters with breathing hoses, (non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking
|
| BS EN 12115-2000
| 液体或气体化学药品用橡胶和热塑软管和软管组件.规范
| Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification
|
| BS EN 12374-1998
| 包装.软管.术语
| Packaging - Flexible tubes - Terminology
|
| BS EN 12377-1999
| 包装材料.软管.封装气密性试验方法
| Packaging - Flexible tubes - Test method for the airtightness of closures
|
| BS EN 12434-2000
| 低温容器.低温软管
| Cryogenic vessels - Cryogenic flexible hoses
|
| BS EN 1256-2006
| 气焊设备.焊接、切割和相关工艺用软管组件规范
| Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes
|
| BS EN 13045-2000
| 包装.圆柱形塑料软管.尺寸和公差
| Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
|
| BS EN 13046-2000
| 包装.圆柱形金属软管.尺寸和公差
| Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances
|
| BS EN 13047-2000
| 包装.锥形金属软管.尺寸和公差
| Packaging - Flexible conical metallic tubes - Dimensions and tolerances
|
| BS EN 13048-2000
| 包装.铝软管.内部清漆膜厚度测量方法
| Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method
|
| BS EN 1327-1996
| 气焊设备.焊接和类似工艺用热固性软管
| Gas welding equipment - Thermoplastic hoses for welding and allied processes
|
| BS EN 13482-2002
| 沥青用橡胶软管及软管组件.规范
| Rubber hoses and hose assemblies for asphalt and bitumen - Specification
|
| BS EN 13483-2005
| 已测定的燃料分配系统用带内部蒸气回收的橡胶和塑料软管和软管组件.规范
| Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
|
| BS EN 1360-2005
| 计量的燃料配送系统用橡胶和塑料软管和软管组件.规范
| Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification
|
| BS EN 1361-2004
| 航空燃料输送用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for aviation fuel handling - Specification
|
| BS EN 13765-2003
| 烃类、溶剂和化学品输送用热塑性多层(非硫化)软管和软管组件.规范
| Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
|
| BS EN 13766-2003
| 液化石油气和液化天然气输送用热塑性多层非硫化软管和软管组件.规范
| Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
|
| BS EN 138-1994
| 呼吸保护装置.与全罩式面罩、半罩式面罩或口承装置一起使用的新鲜空气软管呼吸机规范
| Respiratory protective devices - Specification for fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly
|
| BS EN 13905-2003
| 卫生设备旋塞用低阻力淋浴软管
| Low resistance shower hoses for sanitary tapware
|
| BS EN 14420-1-2004
| 带夹具的软管配件.第1部分:要求、测量、名称与符号及测试
| Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing
|
| BS EN 14420-2-2004
| 带夹件的软管配件.软管尾部的软管侧面部件
| Hose fittings with clamp units - Hose side parts of hose tail
|
| BS EN 14420-3-2004
| 带夹件的软管配件.栓接或销接夹件
| Hose fittings with clamp units - Clamp units, bolted or pinned
|
| BS EN 14420-4-2004
| 带夹件的软管配件.第4部分:法兰连接
| Hose fittings with clamp units - Part 4: Flange connections
|
| BS EN 14420-5-2004
| 带夹件的软管配件.螺纹连接
| Hose fittings with clamp units - Threaded connections
|
| BS EN 14420-6-2004
| 带夹件的软管配件.第6部分:TW油槽车联接器
| Hose fittings with clamp units - Part 6: TW tank truck couplings
|
| BS EN 14420-7-2004
| 带夹件的软管配件.第7部分:凸轮锁紧联接器
| Hose fittings with clamp units - Part 7: Cam locking couplings
|
| BS EN 14420-8-2004
| 带夹件的软管配件.对称半联轴节(吉尔曼系统)
| Hose fittings with clamp units - Symmetrical half coupling (Guillemin system)
|
| BS EN 14422-2004
| 液化石油气(LPG)输送软管用夹具型连接组件
| Clamp type coupling assemblies for LPG transfer hoses
|
| BS EN 14423-2004
| 额定压力到18bar的蒸汽软管用夹具型连接组件
| Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
|
| BS EN 14424-2005
| 带螺旋箍的软管管件
| Hose fittings with screwed ferrules
|
| BS EN 14454-2005
| 防饮用水回流污染的装置.软管接头防回流装置DN 15～DN 32.A型H系列
| Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 inclusive - Family H, type A
|
| BS EN 14540-2004
| 消防软管.固定系统用非渗滤吹塑软管
| Fire-fighting hoses - Non-percolating layflat hoses for fixed systems
|
| BS EN 14585-1-2006
| 压力设备用金属波纹软管组件.要求
| Corrugated metal hose assemblies for pressure applications - Requirements
|
| BS EN 14800-2007
| 使用气体燃料家用器具连接用波纹状安全金属软管组件
| Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
|
| BS EN 1680-1997
| 塑料软管系统.聚乙烯(PE)管道系统用的阀门.弯曲力施加在工作机构上和之后的密封性的检验方法
| Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
|
| BS EN 1761-1999
| 燃料卡车交付的橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for fuel truck delivery - Specification
|
| BS EN 1762-2004
| 25巴(2,5MPA)以下液化石油气(LPG)(液相或气相)以及天然气用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
|
| BS EN 1765-2004
| 油吸放装置用橡胶软管组件.组件规范
| Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
|
| BS EN 24641-1993
| 吸水和排水用橡胶软管规范
| Rubber hoses for water suction and discharge - Specification
|
| BS EN 26801-1985
| 橡胶或塑料软管.体积膨胀的测定
| Rubber or plastics hoses - Determination of volumetric expansion
|
| BS EN 26802-1991
| 金属丝增强橡胶塑料软管及软管配件.抗冲击试验
| Rubber and plastics hoses and hose assemblies - Wire reinforced - Hydraulic impulse test with flexing
|
| BS EN 269-1995
| 呼吸保护装置.带保护罩的动力驱动的新鲜空气软管呼吸机规范
| Respiratory protective devices - Specification for powered fresh air hose breathing apparatus incorporating a hood
|
| BS EN 27326-1991
| 橡胶和塑料软管.静态条件下耐臭氧性评定
| Rubber and plastics hoses - Assessment of ozone resistance under static conditions
|
| BS EN 28029-1987
| 塑料软管.织物增强的通用可拆卸水管规范
| Plastics hose - General purpose collapsible water hose, textile reinforced - Specification
|
| BS EN 29168-1994
| 牙钻手柄.软管连接件
| Dental handpieces - Hose connectors
|
| BS EN 559-2003
| 气焊设备.焊接、切割和相关工艺用橡胶软管
| Gas welding equipment - Rubber hoses for welding, cutting and allied processes
|
| BS EN 560-2005
| 气焊设备.焊接、切割和相关工艺用设备的软管连接
| Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
|
| BS EN 60684-3-212-2006
| 绝缘软管.各种型号软管规范.热收缩聚烯烃软管
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings
|
| BS EN 60684-3-216-2005
| 柔性绝缘软管.各种型号软管规范.热收缩、阻燃、耐火软管
| Flexible insulating sleeving - Specifications for individual types of sleeving - Heat-shrinkable, flame-retarded, limited-fire hazard sleeving
|
| BS EN 60684-3-228-2004
| 绝缘软套管.各种型号软管规范.阻燃、耐流体、收缩比2:1的热收缩、半硬质聚偏二氟乙烯软套管
| Flexible insulating sleeving - Specification requirements for individual types of sleeving - Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1
|
| BS EN 60684-3-233-2006
| 柔性绝缘软管.各种型号软管规范.热收缩氟弹性体软管、阻燃、耐流体、收缩比2:1
| Flexible insulating sleeving - Specifications for individual types of sleeving - Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
|
| BS EN 61770-2000
| 连接总水管的电气仪表.避免软管组件反虹吸和损坏
| Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets
|
| BS EN 62237-2005
| 带电作业.与液压工具和设备一起使用的带配件的绝缘软管
| Live working - Insulating hoses with fittings for use with hydraulic tools and equipment
|
| BS EN 694-2004
| 消防软管.固定系统的半硬性软管
| Fire-fighting hoses - Semi-rigid hoses for fixed systems
|
| BS EN 739-1998
| 医疗用气体设备的低压软管组件
| Low-pressure hose assemblies for use with medical gases
|
| BS EN 788-1994
| 运输食品用的口袋.复合薄膜材料制的软管状提袋
| Sacks for the transport of food aid - Tubular sacks made of composite film
|
| BS EN 853-1997
| 软管和软管组件.金属丝编织加强的液压用类型.规范
| Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
|
| BS EN 854-1997
| 橡胶软管及管组件.纺织物增强的液压用类型.规范
| Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
|
| BS EN 855-1997
| 塑料软管和软管组件.热塑料纺织物增强的液压用类型.规范
| Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification
|
| BS EN 856-1997
| 橡胶软管和软管组件.橡胶包覆螺旋形金属丝增强的液压用类型.规范
| Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
|
| BS EN 857-1997
| 软管及软管部件.液压用的金属线编带增强的抗挤压类型.规范
| Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
|
| BS EN ISO 10380-2003
| 管道系统.波纹状金属软管和软管组件
| Pipework - Corrugated metal hoses and hose assemblies
|
| BS EN ISO 10806-2004
| 管道工程.波纹状金属软管用配件
| Pipework - Fittings for corrugated metal hoses
|
| BS EN ISO 10960-1997
| 橡胶和塑料软管.在动态条件下耐臭氧性的评定
| Rubber and plastic hoses - Assessment of ozone resistance under dynamic conditions
|
| BS EN ISO 11758-1996
| 橡胶和塑料软管.氙弧灯下照射.颜色和外观变化的测定
| Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance
|
| BS EN ISO 1307-1996
| 工业通用橡胶和塑料软管.内直径和公差.长度公差
| Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length
|
| BS EN ISO 13628-2-2006
| 石油和天然气工业.海底采油系统的设计和操作.海底和海洋设备用未结合软管系统
| Petroleum and natural gas industries - Design and operation of subsea production systems - Unbonded flexible pipe systems for subsea and marine applications
|
| BS EN ISO 1401-2000
| 农业喷雾机用橡胶软管
| Rubber hoses for agricultural spraying
|
| BS EN ISO 1402-1997
| 橡胶和塑料软管及软管组件.液压静力试验
| Rubber and plastics hoses and hose assemblies - Hydrostatic testing
|
| BS EN ISO 1403-1996
| 一般水用织物增强橡胶软管.规范
| Rubber hoses, textile-reinforced, for general-purpose water applications - Specification
|
| BS EN ISO 14113-1997
| 气焊设备.最大设计气压为450巴的压缩和液化气用橡胶和塑料软管组件
| Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar
|
| BS EN ISO 14557-2003
| 消防水龙带.橡胶和塑料抽吸软管和软管组件
| Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies
|
| BS EN ISO 15465-2004
| 管道.带绕金属软管和软管组件
| Pipework - Stripwound metal hoses and hose assemblies
|
| BS EN ISO 15540-1999
| 船舶与海上技术,软管组件的耐火性.试验方法
| Ships and marine technology - Fire resistance of hose assemblies - Test methods
|
| BS EN ISO 15541-2001
| 船舶和航海技术.软管组件的抗燃性.试验板的要求
| Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench
|
| BS EN ISO 1746-2001
| 橡胶或塑料软管和管件.弯曲试验
| Rubber or plastics hoses and tubing - Bending tests
|
| BS EN ISO 2398-1996
| 压缩空气用纺织纤维增强橡胶软管规范
| Rubber hose, textile-reinforced, for compressed air - Specification
|
| BS EN ISO 3861-1996
| 喷砂用橡胶软管.规范
| Rubber hoses for sand and grit blasting - Specification
|
| BS EN ISO 3994-2001
| 塑料软管.抽吸和排放含水物的螺旋型热塑增强的热塑软管.规范
| Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
|
| BS EN ISO 4023-1992
| 蒸气用橡胶软管.试验方法
| Rubber hoses for steam - Test methods
|
| BS EN ISO 4080-1992
| 橡胶和塑料软管及软管组件.透气性测定
| Rubber and plastics hoses and hose assemblies - Determination of permeability to gas
|
| BS EN ISO 4671-2001
| 橡胶和塑料软管和软管组件.尺寸测量方法
| Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions
|
| BS EN ISO 4672-1999
| 橡胶和塑料软管.低于室温的柔性试验
| Rubber and plastics hoses - Sub-ambient temperature flexibility tests
|
| BS EN ISO 5771-1996
| 输送无水氨用橡胶软管和软管组件.规范
| Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification
|
| BS EN ISO 5774-2001
| 塑料软管.压缩空气用织物增强的.规范
| Plastics hoses, textile-reinforced, for compressed air - Specification
|
| BS EN ISO 6134-2005
| 饱和蒸汽用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for saturated steam - Specification
|
| BS EN ISO 6224-1996
| 普通水用织物增强塑料软管
| Plastics hoses, textile-reinforced, for general-purpose water applications - Specification
|
| BS EN ISO 6803-1996
| 橡胶或塑料软管和软管组件.非弯曲液压脉冲试验
| Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
|
| BS EN ISO 6806-1996
| 油燃烧器用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for use in oil burners - Specification
|
| BS EN ISO 6807-2004
| 旋转式钻探和振动用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specifications
|
| BS EN ISO 6808-2001
| 石油类液体抽吸和低压排放用塑料软管和软管组件.规范
| Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification
|
| BS EN ISO 6945-1996
| 橡胶软管.外涂层耐磨性的测定
| Rubber hoses - Determination of abrasion resistance of the outer cover
|
| BS EN ISO 7233-1992
| 橡胶和塑料软管及软管部件.吸入阻力测定
| Rubber and plastics hoses and hose assemblies - Determination of suction resistance
|
| BS EN ISO 7369-2004
| 管道.金属软管和软管组件.词汇
| Pipework - Metal hoses and hose assemblies - Vocabulary
|
| BS EN ISO 7662-1996
| 橡胶和塑料软管.内衬磨损的测定
| Rubber and plastics hoses - Determination of abrasion of lining
|
| BS EN ISO 7751-1997
| 橡胶和塑料软管和软管组件.试验压力和爆破压力与设计工作压力之比
| Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure
|
| BS EN ISO 7840-2004
| 小艇.耐火燃油软管
| Small craft - Fire-resistant fuel hoses
|
| BS EN ISO 8028-2000
| 无空气涂料喷涂用塑料和/或橡胶软管组件.规范
| Rubber and/or plastics hose assemblies for airless paint spraying - Specification
|
| BS EN ISO 8030-1998
| 橡胶和塑料软管.易燃性试验方法
| Rubber and plastics hoses - Method of test for flammability
|
| BS EN ISO 8031-1997
| 橡胶和塑料软管和软管组件.电阻的测定
| Rubber and plastics hoses and hose assemblies - Determination of electrical resistance
|
| BS EN ISO 8032-1999
| 橡胶和塑料软管组件.液压脉冲弯曲试验(半Ω 型试验)
| 橡胶和塑料软管组件.液压脉冲弯曲试验(半Ω 型试验)
|
| BS EN ISO 8033-2006
| 橡胶和塑料软管.部件间粘合力的测定
| Rubber and plastics hoses - Determination of adhesion between components
|
| BS EN ISO 8308-1996
| 橡胶和塑料软管和管系.软管和管壁的透液量的测定
| Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls
|
| BS EN ISO 8330-2000
| 橡胶和塑料软管和软管配件.词汇
| Rubber and plastics hoses and hose assemblies - Vocabulary
|
| BS EN ISO 8469-2006
| 小艇.非耐火燃气软管
| Small craft - Non-fire-resistant fuel hoses
|
| BS EN ISO 8580-1989
| 橡胶和塑料软管.静态抗紫外线辐射测试
| Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions
|
| BS ISO 11237-1-2005
| 橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.用于油基液体
| Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Oil-based fluid applications
|
| BS ISO 11237-2-2006
| 橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.用于水基液体
| Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Water-based fluid applications
|
| BS ISO 11424-1997
| 内燃机气动系统和真空系统用橡胶软管和导管.规范
| Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification
|
| BS ISO 11425-1997
| 机动车动力转向装置用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for automobile power-steering systems - Specification
|
| BS ISO 12151-1-1999
| 液压流体力学和一般用途的连接件.软管配件.有ISO 8434-3 O型环对接密封端的软管组件
| Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-3 O-ring face-seal ends
|
| BS ISO 12151-2-2003
| 液压传动和通用联接件.软管接头.带ISO 8434-1和ISO 8434-4 O形圈24锥形末端的软管接头
| Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ° cone connector ends with O-rings
|
| BS ISO 12151-3-1999
| 液压流体力学和一般应用的连接件.软管配件.带ISO 6162法兰端的软管配件
| Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6162 flange ends
|
| BS ISO 12151-4-2007
| 用于液压流体传动和一般用途的接头.软管配件.带ISO 6149米制螺柱端头的软管配件
| Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6149 metric stud ends
|
| BS ISO 12151-5-2007
| 用于液压流体传动和一般用途的接头.软管组件.带ISO 8434-2 37°扩口端的软管配件
| Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-2 37 ° flared ends
|
| BS ISO 13363-2004
| 船用发动机排湿系统用橡胶和塑料软管.规范
| Rubber and plastics hoses for marine-engine wet-exhaust systems - Specification
|
| BS ISO 13774-1999
| 输送内燃机燃料用橡胶和塑料软管.易燃性试验方法
| Rubber and plastics hoses for fuels for internal combustion engines - Method of test for flammability
|
| BS ISO 13775-1-2000
| 汽车用热塑管和软管.非燃料应用
| Thermoplastic tubing and hoses for automotive use - Non-fuel applications
|
| BS ISO 13775-2-2000
| 汽车用热塑管和软管.石油类燃料用
| Thermoplastic tubing and hoses for automotive use - Petroleum-based fuel applications
|
| BS ISO 1436-2-2006
| 橡胶软管和软管组件.金属丝编织增强液压型.规范.用于水基液体
| Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types - Specification - Water-based fluid applications
|
| BS ISO 18752-2006
| 橡胶软管和软管组件.金属丝或纺织物.液压设备用的单胎压力加强型.规范
| Rubber hoses and hose assemblies - Wire- or textile-reinforced single pressure types for hydraulic applications - Specification
|
| BS ISO 19013-2-2005
| 内燃机燃料回路用橡胶软管和管.规范.汽油燃料
| Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Gasoline fuels
|
| BS ISO 21012-2007
| 低温容器.软管
| Cryogenic vessels - Hoses
|
| BS ISO 23933-2006
| 航空航天.等级为135 °C/20.684 kPa (275 °F/3 000 psi) 和135 °C/21 000 kPa (275 °F/3 046 psi)的芳族
| Aerospace series - Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 °C/20 684 kPa (275 °F/3 000 psi) and 135 °C/21 000 kPa (275 °F/3 046 psi) - Procurement specification
|
| BS ISO 2929-2003
| 油槽车放油用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification
|
| BS ISO 4079-2-2006
| 橡胶软管和软管组件.织物增强液压型.规范.水基流体的应用
| Rubber hoses and hose assemblies - Textile-reinforced hydraulic types - Specification - Water-based fluid applications
|
| BS ISO 4081-2006
| 内燃机用制冷系统用橡胶软管和管件.规范
| Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification
|
| BS ISO 6605-2003
| 液压传动.软管及软管组件.试验方法
| Hydraulic fluid power - Hoses and hose assemblies - Test methods
|
| BS ISO 6805-1995
| 井下采矿用橡胶软管和软管组件.采煤用钢丝加筋液压型.规范
| Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification
|
| BS ISO 7314-2003
| 航空航天.液压系统.金属软管组件
| Aerospace - Fluid systems - Metal hose assemblies
|
| BS ISO 8066-2-2001
| 汽车空调器用橡胶和塑料软管及软管配件.规范.冷却剂134a
| Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Refrigerant 134a
|
| BS ISO 8331-2007
| 橡胶和塑料软管及软管组件. 选择、储存、使用和维修指南
| Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance
|
| BS ISO 8789-1995
| 机动车辆运送石油液化气用橡胶软管和软管组件.规范
| Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification
|
| BS ISO 8829-2-2006
| 航空.聚四氟乙烯(PTFE)内软管组件试验方法.非金属编制物
| Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Non-metallic braid
|
| BS ISO 8913-2007
| 航空航天.轻型聚四氟乙烯(PTFE).分级:400 °F/3000 psi (204 ℃/20684 kPa)和204℃/21000 kPa (400 °F/304
| Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 °F/3000 psi (204 °C/20684 kPa) and 204 °C/21000 kPa (400 °F/3046 psi) - Procurement specification
|
| BS M 57-1985
| 航空航天用聚四氟乙烯高温盘旋状软管组件规范
| Specification for high temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) for aerospace applications
|
| 编号 | 中文名称 | 英文名称 |
|---|