| 编号 | 中文名称 | 英文名称 |
|---|
| BS 1377-6-1990
| 土木工程用土壤试验方法.第6部分:在液压压力盒内并且用孔隙压力测量进行固结和渗透率试验
| Methods of test for soils for civil engineering purposes - Consolidation and permeability tests in hydraulic cells and with pore pressure measurement
|
| BS 1486-4-1981
| 润滑脂管嘴规范.第4部分:液压润滑脂管嘴规范
| Lubricating nipples - Specification for hydraulic grease nipples
|
| BS 2000-313-2003
| 石油和石油产品的试验方法.液压油和润滑油的释气值测定
| Methods of test for petroleum and its products - Determination of air release of lubricating and hydraulic oils
|
| BS 2M 49-1997
| 飞机.液压组件.已校准组件液体指示标记
| Aircraft - Hydraulic components - Marking to indicate fluid for which component is approved
|
| BS 2M 51-1989
| 液压系统及元件压力和温度分类
| Classification for pressure and temperature for fluid systems and components
|
| BS 2M 53-1997
| 飞机.液压系统.管道和管接头热冲击试验
| Aircraft - Fluid systems - Thermal shock testing of piping and fittings
|
| BS 3810-2-1965
| 材料装卸术语.第2部分:输送机及提升机(不包括气动和液压装卸)术语
| Glossary of terms used in materials handling - Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling)
|
| BS 3810-3-1967
| 材料装卸术语.第3部分:气动及液压装卸术语
| Glossary of terms used in materials handling - Terms used in connection with pneumatic and hydraulic handling
|
| BS 3M 60-1998
| 液压系统24度锥形可分管道接头.通用规范
| Separable tube fittings for fluid systems, 24 ° cone - General specification
|
| BS 4062-2-1990
| 液压动力系统阀门.第2部分:性能测定方法
| Valves for hydraulic fluid power systems - Methods for determining performance
|
| BS 4361-38-1990
| 木工机械.第38部分:带液压夹紧装置的立式木丝切丝机命名
| Woodworking machines - Nomenclature for vertical shredding machines for wood wool production, with hydraulic clamping
|
| BS 4368-4-1984
| 液压和通用压合管接头.第4部分:型号试验要求规范
| Metallic tube connectors for fluid power and general use - Specification for type test requirements
|
| BS 4617-1983
| 液压流体动力传输用动力泵和电动机性能的测定方法
| Methods for determining the performance of pumps and motors for hydraulic fluid power transmission
|
| BS 4742-2-1993
| 农用机械液压设备.第2部分:通用快速液压管接头规范
| Hydraulic equipment for agricultural machinery - Specification for quick-action hydraulic couplers for general purposes
|
| BS 4742-3-1985
| 农用机械液压设备.第3部分:挂车用单动倾卸伸缩筒尺寸和额定压力规范
| Hydraulic equipment for agricultural machinery - Specification for dimensions and pressure rating of single-acting telescopic tipping cylinders for trailers
|
| BS 4742-4-1985
| 农用机械液压设备.第4部分:挂车和机具用制动系统用液压管接头规范
| Hydraulic equipment for agricultural machinery - Specification for hydraulic couplings on braking systems for trailers and trailed equipment
|
| BS 4742-5-1985
| 农用机械液压设备.第5部分:挂车和机具用制动气缸尺寸规范
| Hydraulic equipment for agricultural machinery - Specification for dimensions of braking cylinders for trailers and trailed equipment
|
| BS 4742-6-1988
| 农业机械用液压设备.第6部分:农业拖拉机液压回程到槽口的尺寸和位置规范
| Hydraulic equipment for agricultural machinery - Specification for dimensions and location of agricultural tractor hydraulic return to sump porting
|
| BS 4742-7-1989
| 农用机械液压设备.第7部分:农用拖挂车辆液压制动系统管接头用油口连接规范
| Hydraulic equipment for agricultural machinery - Specification for port connections for agricultural trailed vehicle hydraulic brake couplings
|
| BS 4742-8-1990
| 农用机械用液压设备.第8部分:农用拖拉机分置式液压和控制装置颜色编码方法
| Hydraulic equipment for agricultural machinery - Method for colour coding of remote hydraulic power services and controls on agricultural tractors
|
| BS 4L 54-1986
| 99%铝管规范(冷拔:无缝:液压试验)(壁厚不超过12mm)
| Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding 12 mm wall thickness)
|
| BS 4L 56-1986
| 铝-2<1/4>%镁合金管规范(强度符号-O)(无缝管:液压试验)(壁厚不超过12mm)
| Specification for tube of aluminium-21/4% magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness)
|
| BS 5173-102.10-1990
| 橡胶和塑料软管组件的试验方法.第102部分:液压试验.第10节:吸油和放油软管静液压试验
| Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Hydrostatic tests for oil suction and discharge hose
|
| BS 5173-102.3-1988
| 橡胶和塑料软管及软管组件试验方法.第102部分:液压试验.第3节:燃料分配泵软管体积膨胀测定
| Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of fuel-dispensing pump hoses
|
| BS 5173-102.4-1990
| 橡胶和塑料软管组件试验方法.第102部分:液压试验.第4节:液压软管体积膨胀测定
| Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of hydraulic hoses
|
| BS 5173-102.8-1987
| 橡胶和塑料软管及软管组件试验方法.第102部分:液压试验.第8节:硬质增强热塑性塑料螺旋管压力脉冲试验
| Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Pressure impulse test for rigid helix reinforced thermoplastics hoses
|
| BS 5242-1-1987
| 液压动力流体气缸筒用管材.第1部分:特别精加工表面的钢管规范
| Tubes for fluid power cylinder barrels - Specification for steel tubes with specially finished surfaces
|
| BS 5242-2-1983
| 液压气缸筒用管.第2部分:精镗有色金属管规范
| Tubes for fluid power cylinder barrels - Specification for non-ferrous metallic tubes with specially finished bores
|
| BS 5244-1986
| 液压橡胶软管及软管组件的使用、贮藏及寿命期限推荐标准
| Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies
|
| BS 5327-1976
| 液压装置用后直角弯头规范
| Specification - Swept elbow bends for fluid power applications
|
| BS 5380-1984
| 用O 型圈密封及G 系列紧固螺纹的液压系流入口及连接螺栓规范
| Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads
|
| BS 5412-1996
| 适用于最大PN 10、最低液压0.01MPa(0.1bar)的低阻力单一龙头和组合龙头组件(额定尺寸<1/2>和<1/4>)规范
| Specification for low-resistance single taps and combination tap assemblies (nominal size 1/2 and 3/4) suitable for operation at PN 10 max - and a minimum flow pressure of 0.01 MPa (0.1 bar)
|
| BS 5540-3-1978
| 评定液压油颗粒物污染规范.第3部分:瓶装油液取样方法
| Specification for evaluating particulate contamination of hydraulic fluids - Methods of bottling fluid samples
|
| BS 5540-6-1990
| 液压油颗粒污染评定.第6部分:颗粒自动计数器校准方法(使用单一尺寸胶乳球)
| Evaluating particulate contamination of hydraulic fluids - Method of calibrating liquid automatic particle-count instruments (using mono-sized latex spheres)
|
| BS 5540-7-1991
| 液压油颗粒污染评定.第7部分:污染等级测定方法(称重法)
| Evaluating particulate contamination of hydraulic fluids - Method of determining the level of contamination (by the gravimetric method)
|
| BS 5655-10.2.1-1995
| 电梯与服务电梯.第10部分:试验和检验规范.第2节:液压机.第1小节:新升降机交付使用试验
| Lifts and service lifts - Specification for the testing and examination of lifts and service lifts - Hydraulic lifts - Commissioning tests for new lifts
|
| BS 5655-12-2005
| 电梯与服务电梯.现有液压升降机改进的操作实施规程
| Lifts and service lifts - Code of practice for the undertaking of modifications to existing hydraulic lifts
|
| BS 5751-1987
| 往复运动的液压密封件壳体尺寸规范
| Specification for dimensions of housings for hydraulic seals for reciprocating applications
|
| BS 5944-1-1992
| 液压动力系统和部件气动噪声测量.第1部分:液压泵试验方法
| Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps
|
| BS 5944-2-1992
| 液压动力系统和部件气动噪声测量.第2部分:电动机试验方法
| Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for motors
|
| BS 5944-4-1984
| 液压动力系统和部件空气噪音测量.第4部分:流量和压力控制阀声功率级测定方法
| Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure
|
| BS 5944-5-1985
| 液压系统和部件气动噪音测量.第5部分:使消声室测定液压泵声功率等级的简易方法
| Measurement of airborne noise from hydraulic fluid power systems and components - Simplified method of determining sound power levels from pumps using an anechoic chamber
|
| BS 5944-6-1992
| 液压动力系统和部件气动噪声测量.第6部分:平行六面体传声器阵列测试液压泵噪声
| Measurement of airborne noise from hydraulic fluid power systems and components - Method of test for pumps using a parallelepiped microphone array
|
| BS 6100-2.5-1991
| 建筑和土木工程术语.第2部分:土木工程.第5集:液压工程和施工
| Glossary of building and civil engineering terms - Civil engineering - Hydraulic engineering and construction work
|
| BS 6142-1981
| 农用拖拉机和农机液压系统技术数据的表述规范
| Specification for presentation of technical data on hydraulic systems of agricultural tractors and machinery
|
| BS 6331-4-1985
| 单杆双动液压作动筒安装尺寸.第4部分:63bar系列(包括有关部件)规范
| Mounting dimensions of single rod double acting hydraulic cylinders - Specification for 63 bar series, including associated components
|
| BS 6347-2-1983
| 农用拖拉机性能评定.第2部分:液压功率和提升能力测定方法
| Performance assessment of agricultural tractors - Methods for determination of hydraulic power and lifting capacity
|
| BS 6361-1988
| 电控液压设备用三相插接件规范
| Specification for three-pin plug connectors for electrically controlled fluid power equipment
|
| BS 6525-1984
| 液压流体动力系统用储液器的设计与建造规范
| Specification for design and construction of reservoirs used in hydraulic fluid power systems
|
| BS 6537-1984
| 液压流体设备用U型接头规范
| Specification for staple type connectors for hydraulic fluid power applications
|
| BS 6911-11-1997
| 运土机械试验.液压挖掘机铲斗和反向铲装载铲斗容量额定值测定方法
| Testing earth-moving machinery - Method for the determination of volumetric ratings for hydraulic excavator buckets and backhoe loader buckets
|
| BS 6911-3-1990
| 运土机械试验.第3部分:液压挖掘机工具强度测量
| Testing earth-moving machinery - Measurement of tool forces of hydraulic excavators
|
| BS 6911-8-1993
| 运土机械试验.第8部分:机械液压系统操作倾斜度极限值的测定(静态试验法)
| Testing earth-moving machinery - Determination of slope limits for machine fluid systems operation (static test method)
|
| BS 6912-1-1997
| 运土机械的安全性.液压挖掘机和反铲装载机起重吊杆放下控制装置
| Safety of earth-moving machinery - Specification for hydraulic excavator and backhoe loader boom lowering control device
|
| BS 6912-9-1992
| 运土机械的安全.第9部分:液压挖掘机的升降能力的计算和检验方法
| Safety of earth-moving machinery - Methods for the calculation and verification of the lift capacity of hydraulic excavators
|
| BS 6914-8-1993
| 运土机械术语(包括尺寸和图形符号定义).第8部分:液压挖掘机用术语和商务规范
| Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Terminology and commercial specifications for hydraulic excavators
|
| BS 7198-1-1989
| 液压流体动力快速连接件.第1部分:尺寸和性能规范
| Hydraulic fluid power quick-action couplings - Specification for dimensions and performance
|
| BS 7201-1-1990
| 液压流体动力.气体加载蓄能器.第1部分:水容量0.5L以上无缝钢蓄能器体规范
| Hydraulic fluid power - Gas loaded accumulators - Specification for seamless steel accumulator bodies above 0.5 L water capacity
|
| BS 7250-1989
| 液压传动正排量泵和电动机导出量的测定方法
| Methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors
|
| BS 7275-3-1995
| 液压流体动力马达特性的测定.第3部分:恒定流和恒定扭矩法
| Determination of hydraulic fluid power motor characteristics - Method at constant flow and at constant torque
|
| BS 7285-1990
| 振动发生伺服液压试验设备的特性描述方法
| Method for describing characteristics of servo-hydraulic test equipment for generating vibration
|
| BS 7287-1990
| 耐火液压油使用指南
| Guide for the use of fire-resistant hydraulic fluids
|
| BS 7296-1-1990
| 液压动力卡盘式阀的空腔.第1部分:二通镶套滑动阀规范
| Cavities for hydraulic fluid power cartridge valves - Specification for two-port slip-in valves
|
| BS 7388-1991
| 液压动力系统防泄漏指南
| Guide for prevention of leaks from hydraulic fluid power systems
|
| BS 7403-5-1991
| 内燃机用全流式润滑油过滤器.第5部分:冷起动摸拟和液压脉冲耐久性的试验方法
| Full-flow lubricating oil filters for internal combustion engines - Method of test for cold start simulation and hydraulic pulse durability
|
| BS 7416-1991
| 液压动力系统用精密无缝冷拔低碳钢管规范
| Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems
|
| BS 7417-1991
| 平面'O'形密封液压耦合器界面尺寸规范
| Specification for interface dimensions of flat face 'O'-ring seal hydraulic couplings
|
| BS 7504-1995
| 液压流体动力.在压力25 MPa 和40 MPa(250 巴 和400 巴)条件下使用的四螺钉、单片正方形法兰连接器
| Hydraulic fluid power - Four-screw, one-piece square flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
|
| BS 778-1966
| 液压用钢管与接头规范
| Specification for steel pipes and joints for hydraulic purposes
|
| BS 7791-1995
| 农业拖拉机.液压器具
| Agricultural tractors - Hydraulic pressure for implements
|
| BS AU 216-1-1987
| 道路车辆用石油基制动液的液压制动系统.第1部分:石油基基准液规范
| Hydraulic brake systems using petroleum base brake fluids for road vehicles - Specification for petroleum base reference fluid
|
| BS DD ISO/TR 16144-2002
| 液压流体动力.液体粒子自动计算器的校验.SRM 2806 标准参照物质认证所使用的程序
| Hydraulic fluid power - Calibration of liquid automatic particle counters - Procedures used to certify the standard reference material SRM 2806
|
| BS EN 10246-1-1996
| 钢管的无损检验.证明液压系统密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验
| Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
|
| BS EN 10275-1999
| 金属材料.管形环液压试验
| Metallic materials - Tube ring hydraulic pressure test
|
| BS EN 10305-4-2003
| 精密仪器用钢管.技术交货条件.液压和气动系统用无缝冷拉管
| Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes for hydraulic and pneumatic power systems
|
| BS EN 10305-6-2005
| 精密仪器用钢管.交货技术条件.液压和气动动力系统用焊接冷拉管材
| Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes for hydraulic and pneumatic power systems
|
| BS EN 12107-1998
| 塑料管道系统.注射模塑热塑性塑料管件、阀门和辅助设备.注射模塑管道元件用热塑性材料的长期液压强度的测定
| Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
|
| BS EN 12162-2001
| 液体泵.安全要求.液压静态试验程序
| Liquid pumps - Safety requirements - Procedure for hydrostatic testing
|
| BS EN 12312-19-2005
| 飞行器地面支持设备.特殊要求.飞行器千斤顶、轴式千斤顶和液压机尾托架
| Aircraft ground support equipment - Specific requirements - Aircraft jacks, axle jacks, and hydraulic tail stanchions
|
| BS EN 12332-2-2002
| 橡胶或塑料涂覆织物.抗破碎强度的测定.液压法
| Rubber- or plastics-coated fabrics - Determination of bursting strength - Hydraulic method
|
| BS EN 12622-2001
| 机床安全性.液压弯曲机
| Safety of machine tools - Hydraulic press brakes
|
| BS EN 12639-2000
| 液压泵和泵组.噪音测试规程.2级和3级精度
| Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy
|
| BS EN 12723-2000
| 液压泵.泵和设备的通用术语.定义、数量、字母符号和单位
| Liquid pumps - General terms for pumps and installations - Definitions, quantities, letter symbols and units
|
| BS EN 12952-14-2004
| 水管锅炉和辅助设备.使用液压氨和氨水溶液的废气DENOX系统的要求
| Water-tube boilers and auxiliary installations - Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution
|
| BS EN 13204-2005
| 消防和救生用双动液压救生工具.安全和性能要求
| Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements
|
| BS EN 13242-2002
| 土木工程和道路建筑用非粘合的和液压结合材料用集料
| Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
|
| BS EN 13286-3-2003
| 松散的和液压粘合的混合料.实验室参考密度和水含量的测试方法.有控制参数的振动压缩
| Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
|
| BS EN 13286-4-2003
| 松散的和液压粘合的混合料.实验室参考密度和水含量的测试方法.振动锤
| Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating hammer
|
| BS EN 13286-40-2003
| 松散的和液压粘合的混合料.测定液压粘合混合料直接抗拉强度的试验方法
| Unbound and hydraulically bound mixtures - Test method for determination of the direct tensile strength of hydraulically bound mixtures
|
| BS EN 13286-41-2003
| 松散的和液压粘合的混合料.测定液压粘合混合料抗压强度的试验方法
| Unbound and hydraulically bound mixtures - Test method for determination of the compressive strength of hydraulically bound mixtures
|
| BS EN 13286-42-2003
| 松散的和液压粘合的混合料.测定液压粘合混合料非直接拉力强度的试验方法
| Unbound and hydraulically bound mixtures - Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
|
| BS EN 13286-43-2003
| 松散的和液压粘合的混合料.测定液压粘合混合料弹性模量的试验方法
| Unbound and hydraulically bound mixtures - Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
|
| BS EN 13286-46-2003
| 松散的和液压粘合的混合料.测定湿度值试验方法
| Unbound and hydraulically bound mixtures - Test method for the determination of the moisture condition value
|
| BS EN 13286-5-2003
| 松散的和液压粘合的混合料.实验室参考密度和水含量的测试方法.振动台
| Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating table
|
| BS EN 13408-2002
| 液压固化地板修平和/或整平复合物的试验方法.粘结强度的测定
| Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength
|
| BS EN 13409-2002
| 液压固化地板修平和/或整平复合物的试验方法.凝固时间测定
| Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time
|
| BS EN 13802-2004
| 铁路设施.悬挂部件.液压减震器
| Railway applications - Suspension components - Hydraulic dampers
|
| BS EN 14227-13-2006
| 液力粘结混合料.规范.液压道路粘合剂处理的土壤
| Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder
|
| BS EN 14653-1-2005
| 地面维护支撑用人工操纵液压支撑系统.产品规范
| Manually operated hydraulic shoring systems for groundwork support - Product specifications
|
| BS EN 14653-2-2005
| 地面维护支撑用人工操纵液压支撑系统.计算或试验评定
| Manually operated hydraulic shoring systems for groundwork support - Assessment by calculation or test
|
| BS EN 1487-2000
| 建筑物阀门.液压安全组.试验和要求
| Building valves - Hydraulic safety groups - Tests and requirements
|
| BS EN 1777-2004
| 防火和救援服务用液压升降平台.安全要求和试验
| Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
|
| BS EN 1804-1-2002
| 地下采矿机械.液压矿顶支撑物的安全性要求.支撑装置及一般要求
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Support units and general requirements
|
| BS EN 1804-2-2002
| 地矿机械.液压矿顶支撑物的安全要求.动力装置支脚和冲压件
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Power set legs and rams
|
| BS EN 1804-3-2006
| 地矿机械.液压矿顶支撑物的安全要求.液压控制系统
| Machines for underground mines - Safety requirements for hydraulic powered roof supports - Hydraulic control systems
|
| BS EN 2591-515-2005
| 航空航天系列.电和光学连接元件.试验方法.液压稳定性
| Elements of electrical and optical connection — Test methods — Part 515: Hydrolytic stability
|
| BS EN 474-5-1996
| 土方机械.安全.液压挖掘机的要求
| Earth-moving machinery - Safety - Requirements for hydraulic excavators
|
| BS EN 50340-2002
| 电缆切割液压装置.用于公称电压在交流30KV以下电气设施的电缆切割装置
| Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV
|
| BS EN 60041-1995
| 水轮机,现场验收试验测定蓄水泵和涡轮泵液压性能
| Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
|
| BS EN 61362-1998
| 液压涡轮控制系统规范指南
| Guide to specification of hydroturbine control systems
|
| BS EN 693-2001
| 机床的安全性.液压机
| Machine tools - Safety - Hydraulic presses
|
| BS EN 773-1999
| 液压压力排气管、排水管和污水管道中使用部件的一般要求
| General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
|
| BS EN 804-1995
| 塑料管道系统.压力管道溶剂胶粘接头的注射模塑承口连接管件.短期内部液压压力的试验方法
| Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure
|
| BS EN 81-2-1998
| 升降机的建造和安装的安全规则.液压梯
| Safety rules for the construction and installation of lifts - Hydraulic lifts
|
| BS EN 81-3-2001
| 电梯的建造和安装的安全规则.电动和液压饲服电梯
| Safety rules for the construction and installation of lifts - Electric and hydraulic service lifts
|
| BS EN 853-1997
| 软管和软管组件.金属丝编织加强的液压用类型.规范
| Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification
|
| BS EN 854-1997
| 橡胶软管及管组件.纺织物增强的液压用类型.规范
| Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
|
| BS EN 855-1997
| 塑料软管和软管组件.热塑料纺织物增强的液压用类型.规范
| Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification
|
| BS EN 856-1997
| 橡胶软管和软管组件.橡胶包覆螺旋形金属丝增强的液压用类型.规范
| Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification
|
| BS EN 857-1997
| 软管及软管部件.液压用的金属线编带增强的抗挤压类型.规范
| Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification
|
| BS EN 982-1996
| 机械的安全性.流体动力系统及其元件的安全性要求.液压传动装置
| Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
|
| BS EN ISO 10592-1995
| 小艇.液压操舵系统
| Small craft - Hydraulic steering systems
|
| BS EN ISO 12922-1999
| 润滑油、工业油及有关产品(L级).H族(液压系统).HFAE、HFAS、HFB、HFC、HFDR和HFDU类别规范
| Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
|
| BS EN ISO 13938-1-1999
| 纺织品.纤维胀破特性.胀破强度和胀破膨胀测定的液压方法
| Textiles - Bursting properties of fabrics - Hydraulic method for determination of bursting strength and bursting distension
|
| BS EN ISO 1402-1997
| 橡胶和塑料软管及软管组件.液压静力试验
| Rubber and plastics hoses and hose assemblies - Hydrostatic testing
|
| BS EN ISO 19879-2006
| 液压和一般用途金属管连接件.液压传动连接件的试验方法
| Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
|
| BS EN ISO 20763-2004
| 石油和相关产品.液压液耐磨性的测定.叶轮泵法
| Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
|
| BS EN ISO 4263-2-2003
| 石油及其产品.抑制油和流体的老化性的测定.TOST试验.HFC类液压液的试验程序
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Procedure for category HFC hydraulic fluids
|
| BS EN ISO 4263-3-2006
| 石油及其产品.抑制油和流体的老化性的测定.TOST试验.合成液压液的无水程序
| Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Anhydrous procedure for synthetic hydraulic fluids
|
| BS EN ISO 4404-2-2003
| 石油和相关产品.难燃液压液抗腐蚀性的测定.不含水液体
| Petroleum and related products - Determination of the corrosion resistance fire-resistant hydraulic fluids - Non-aqueous fluids
|
| BS EN ISO 5198-1999
| 离心式混流轴向泵.液压性能试验规程.精密级
| Centrifugal, mixed flow and axial pumps - Code for hydraulic performance tests - Precision class
|
| BS EN ISO 6743-4-1999
| 润滑剂、工业用润滑油和有关产品(L类).分类.H族(液压系统)
| Lubricants, industrial oils and related products (class L) - Classification - Family H (hydraulic systems)
|
| BS EN ISO 6803-1996
| 橡胶或塑料软管和软管组件.非弯曲液压脉冲试验
| Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
|
| BS EN ISO 8032-1998
| 橡胶和塑料软管组件.液压脉冲弯曲试验(半Ω 型试验)
| Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test)
|
| BS EN ISO 8434-1-1995
| 液压传动和一般用金属导管的连接.24度压合接头
| Metallic tube connections for fluid power and general use - 24 ° compression fittings
|
| BS EN ISO 8434-4-1997
| 液压及通用金属管连接件.有O形面焊接管接头的24度锥形连接件
| Metallic tube connections for fluid power and general use - 24 ° cone connectors with O-ring weld-on nipples
|
| BS EN ISO 9080-2003
| 塑料管道和导管系统.用外推法测定热塑塑料管道的长期静液压强度
| Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
|
| BS EN ISO 9906-2000
| 涡轮式泵.液压性能验收试验.1和2级
| Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2
|
| BS EN ISO 9974-1-2000
| 普通和液压传动用联接件.用ISO 261弹性螺纹或金属与金属间密封的气门和双头螺栓端头.螺纹气门
| Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Threaded ports
|
| BS EN ISO 9974-2-2000
| 普通和液压传动用联接件.用ISO 261弹性螺纹或金属与金属间密封的气门和双头螺栓端头.(E型)弹性密封的双头螺
| Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with elastomeric sealing (type E)
|
| BS EN ISO 9974-3-2000
| 普通和液压用联接结件.用ISO 261螺纹的弹性或金属与金属间密封的气门和双头螺栓端头.(B型)金属与金属间密封
| Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with metal-to-metal sealing (type B)
|
| BS IEC 60092-204-2001
| 船舶电气设施.系统设计.电动和电动液压操舵装置
| Electrical installation in ships - System design - Electric and electrohydraulic steering gear
|
| BS ISO 10100-2001
| 液压传动.液压缸.验收试验
| Hydraulic fluid power - Cylinders - Acceptance tests
|
| BS ISO 10372-1998
| 液压流体动力.4孔和5孔伺服阀.安装面
| Hydraulic fluid power - Four-and five-port servovalves - Mounting surfaces
|
| BS ISO 10627-2-1996
| 农用液压式喷雾器.数据表.第2部分:部件相关的技术规范
| Hydraulic agricultural sprayers - Data sheets - Technical specifications related to components
|
| BS ISO 10762-1998
| 液压流体动力.汽缸安装尺寸.10Mpa(100bar)系列
| Hydraulic fluid power - Cylinder mounting dimensions - 10 MPa (100 bar) series
|
| BS ISO 10766-2006
| 液压动力.汽缸.活塞及连杆用矩形截面轴承环沟槽尺寸
| Hydraulic fluid power - Cylinders - Housing dimensions forrectangular-sect bearing rings for pistons and rods
|
| BS ISO 10767-1-1996
| 液压流体动力.对系统和部件产生压力波动级的测定.第1部分:泵精度法
| Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Precision method for pumps
|
| BS ISO 10767-2-1999
| 液压传动.系统和元件中产生压力波动值的测定.泵的简化方法
| Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps
|
| BS ISO 10767-3-2000
| 液压传动.系统和元件产生压力波动值的测定.马达用方法
| Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Method for motors
|
| BS ISO 10770-1-1998
| 液压流体动力.电动调节液压控制阀.第1部分:四向流动控制阀的试验方法
| Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves
|
| BS ISO 10770-2-1998
| 液压流体动力.电动调节液压控制阀.第2部分:三向流动控制阀的试验方法
| Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves
|
| BS ISO 10771-1-2002
| 液压流体动力.金属压力容器外壳的疲劳压力试验.试验方法
| Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Test method
|
| BS ISO 10945-2000
| 液压传动.充气蓄能器.气口的尺寸
| Hydraulic fluid power - Gas-loaded accumulators - Dimensions of gas ports
|
| BS ISO 10946-1999
| 液压传动.隔离式充气蓄能器.优先选择的液压油
| Hydraulic fluid power - Gas-loaded accumulators with separator - Selection of preferred hydraulic ports
|
| BS ISO 11158-1998
| 润滑剂、工业油和相关产品(L类).H系列(液压系统).HH、HL、HM、HR、HV和HG类别规范
| Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HR, HV and HG
|
| BS ISO 11170-2004
| 液压传动.滤芯.性能特性检定的试验序列
| Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics
|
| BS ISO 11171-2000
| 液压传动.液体自动粒子计数器的校正
| Hydraulic fluid power - Calibration of automatic particle counters for liquids
|
| BS ISO 11237-1-2005
| 橡胶软管和软管组件.用于液压系统的金属丝编织增强压实型软管和软管组件.规范.用于油基液体
| Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Oil-based fluid applications
|
| BS ISO 11500-1997
| 液压流体动力.采用光消失原理自动计数法对微粒子不纯度的测定
| Hydraulic fluid power - Determination of particulate contamination by automatic counting using the light extinction principle
|
| BS ISO 11599-1998
| 含有包埋放射废物的液压粘合剂气孔和透气性的测定
| Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste
|
| BS ISO 11943-1999
| 液压流体力学.液体在线上自动流水颗粒计数系统.校验和批准方法
| Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation
|
| BS ISO 12151-1-1999
| 液压流体力学和一般用途的连接件.软管配件.有ISO 8434-3 O型环对接密封端的软管组件
| Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-3 O-ring face-seal ends
|
| BS ISO 12151-2-2003
| 液压传动和通用联接件.软管接头.带ISO 8434-1和ISO 8434-4 O形圈24锥形末端的软管接头
| Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ° cone connector ends with O-rings
|
| BS ISO 12151-3-1999
| 液压流体力学和一般应用的连接件.软管配件.带ISO 6162法兰端的软管配件
| Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6162 flange ends
|
| BS ISO 12333-2000
| 航空航天.定量液压马达.35000KPa系统的一般规范
| Aerospace - Constant displacement hydraulic motors - General specifications for 35000 kPa systems
|
| BS ISO 12334-2000
| 航空航天.液压的压力补偿的变量输送泵.35000KPa系统的一般要求
| Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems
|
| BS ISO 12922-1999
| 润滑油,工业油和相关产品(L级).H族(液压系统).HFA、HFAS、HFB、HFC、HFDR和HFDU类别规范
| Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
|
| BS ISO 13486-1-1999
| 道路车辆.液压制动系统.双扩口管,螺纹孔,外螺纹接头和管座
| Road vehicles - Hydraulic braking systems - Double-flare pipes, tapped holes, male fittings and tube seats
|
| BS ISO 13726-1998
| 液压流体动力.内径为250mm-500mm的16MPa(160bar)紧凑式系列单杆汽缸.附件安装尺寸
| Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions
|
| BS ISO 14617-10-2004
| 图示的图形符号.液压变流器
| Graphical symbols for diagrams - Fluid power converters
|
| BS ISO 15086-1-2001
| 液压流体动力.部件和系统液载噪音特性的测定.导言
| Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Hydraulic fluid power - Determination of the fluid borne noise characteristics of components and systems - Introduction
|
| BS ISO 15086-2-2000
| 液压流体动力.部件和系统液载噪音特性的测定.管道流体声速的测量
| Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Measurement of speed of sound in a fluid in a pipe
|
| BS ISO 15171-1-1999
| 液压和一般用途的连接.诊断用的液压联结器.不用于压力条件下连接的联结器
| Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling not for connection under pressure
|
| BS ISO 15171-2-2000
| 流体动力和通用连接器.诊断用液压联轴器.加压连接用M16×2端头
| Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Coupling with M16 x 2 end for connection under pressure
|
| BS ISO 15217-2001
| 液压流体动力系统和部件.16平方毫米接地电气连接器.特性和要求
| Fluid power systems and components - 16mm square electrical connector with earth contact - Characteristics and requirements
|
| BS ISO 15380-2002
| 润滑剂、工业用油和相关产品(L类).H族(液压系统).HETG, HEPG, HEES 和 HEPR类的规范
| Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR
|
| BS ISO 16028-2000
| 液压流体动力.在20MPa(200巴)到31.5MPa(315巴)的压力下使用平面型速动联轴器.规范
| Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications
|
| BS ISO 16656-2004
| 液压传动.10MPa(100 bar)下使用的缸径在32mm到100mm的单杆、短冲程气缸.安装尺寸
| Hydraulic fluid power - Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) - Mounting dimensions
|
| BS ISO 16860-2006
| 液压传动.过滤器.差压设备试验方法
| Hydraulic fluid power - Filters - Test method for differential pressure devices
|
| BS ISO 16873-2002
| 液压流体动力.压力开关.安装表面
| Hydraulic fluid power - Pressure switches - Mounting surfaces
|
| BS ISO 16874-2004
| 液压传动.歧管及其元件的标识
| Hydraulic fluid power - Identification of manifold assemblies and their components
|
| BS ISO 16889-2000
| 液压流体动力过滤器.过滤器元件过滤性能多路法的评估
| Hydraulic fluid power filters - Multi-pass method for evaluating filtration performance of a filter element
|
| BS ISO 16902-1-2003
| 液压传动.用声强法测定声功率级的试验规程.工程法.泵
| Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques - Engineering method - Pumps
|
| BS ISO 17559-2004
| 液压传动.电控液压泵.性能特征测定的试验方法
| Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics
|
| BS ISO 18413-2002
| 液压流体动力.零部件的清洁度.与污染收集、分析和数据报告相关的检查文件和原则
| Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection , analysis and data reporting
|
| BS ISO 20401-2005
| 气动液压驱动系统.方向控制阀.直径为8mm-12mm的电动圆形连接器的管脚分布规范
| Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm
|
| BS ISO 20843-2003
| 石油和相关产品.HFAE、HFAS和HFC类中抗燃液压油pH的测定
| Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
|
| BS ISO 2941-1996
| 液压流体动力.过滤器元件.抗挤压/爆裂性检验
| Hydraulic fluid power - Filter elements - Verification of collapse/burst resistance
|
| BS ISO 2942-2004
| 液压传动.滤芯.结构完整性的验证和第一气泡点的测定
| Hydraulic fluid power - Filter elements - Verification of fabrication integrity and determination of the first bubble point
|
| BS ISO 2943-1999
| 液压传动.滤芯.材料和油液相容性的验证
| Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids
|
| BS ISO 2944-2000
| 液压动力系统和元件.标称压力
| Fluid power systems and components - Nominal pressures
|
| BS ISO 3322-1996
| 流体动力系统和部件.液压缸.标称压力
| Fluid power systems and components - Cylinders - Nominal pressures
|
| BS ISO 3601-3-2005
| 液压流体动力.O型环.质量验收标准
| Fluid power systems - O-rings - Quality acceptance criteria
|
| BS ISO 3723-1996
| 液压流体动力.过滤器元件.端向负荷试验方法
| Hydraulic fluid power - Filter elements - Method for end load test
|
| BS ISO 3724-1996
| 液压流体动力.过滤器元件.流动疲劳特性验证
| Hydraulic fluid power - Filter elements - Verification of flow fatigue characteristics
|
| BS ISO 3968-2002
| 液压传动.过滤器.差压与流量特性关系的评估
| Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics
|
| BS ISO 4392-1-2002
| 液压流体动力.电动机特性的测定.在恒低速和常压下
| Hydraulic fluid power - Determination of characteristics of motors - At constant low speed and constant pressure
|
| BS ISO 4392-2-2002
| 液压流体动力.电动机特性的测定.稳定性
| Hydraulic fluid power - Determination of characteristics of motors - Startability
|
| BS ISO 4401-2005
| 液压流体动力.四孔定向控制阀.安装面
| Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
|
| BS ISO 4404-1-2002
| 石油和相关产品.耐火液压流体的耐腐蚀性能的测定.含水流体
| Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Water-containing fluids
|
| BS ISO 4404-1998
| 石油和相关产品.液压系统用含水防火液体的耐腐蚀性测定
| Petroleum and related products - Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems
|
| BS ISO 4406-2000
| 液压传动.油液.固体颗粒污染等级代码法
| Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles
|
| BS ISO 4407-2002
| 液压流体动力.流体污染.用光学显微镜计数法测定粒状物污染
| Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
|
| BS ISO 4413-1998
| 液压流体动力.有关系统的一般规则
| Hydraulic fluid power - General rules relating to systems
|
| BS ISO 4925-2005
| 道路车辆.液压系统用非石油基制动液规范
| Road vehicles - Specification of non-petroleum-base brake fluids for hydraulic systems
|
| BS ISO 4927-2005
| 道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度120℃)
| Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.)
|
| BS ISO 5596-2000
| 液压传动.隔离式充气蓄能器.压力、容积范围和特性量
| Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities
|
| BS ISO 5781-2000
| 液压传动.减压阀、顺序阀、卸荷阀、节流阀和单向阀.安装面
| Hydraulic fluid power - Pressure reducing valves, sequence valves , unloading valves, throttle valves and check valves - Mounting surfaces
|
| BS ISO 6020-1-1998
| 液压流体动力.16MPa(160bar)系列单杆汽缸安装尺寸.中型系列
| Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Medium series
|
| BS ISO 6020-2-2006
| 液压流体动力.16MPa(160bar)系列单杆汽缸用安装尺寸.小型系列
| Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series
|
| BS ISO 6020-3-1995
| 液压流体动力.16MPa(160bar)系列单杆汽缸用安装尺寸.内径从250mm到500mm的紧凑式系列
| Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Compact series with bores from 250 mm to 500 mm
|
| BS ISO 6022-2006
| 液压传动.25M Pa (250巴)系列单杆汽缸安装尺寸
| Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series
|
| BS ISO 6072-2002
| 液压流体动力.流体和标准合成橡胶材料间的兼容性
| Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials
|
| BS ISO 6099-2001
| 流体动力系统和元件.液压缸.装配尺寸和装配类型的识别代码
| Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types
|
| BS ISO 6117-2005
| 道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度100℃)
| Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100?C max.)
|
| BS ISO 6162-1-2002
| 液压传动.带对开夹或整体式法兰夹的法兰接头以及公制或英制螺钉.在压力为3,5MPa(35bar)至35MPa(350bar),DN1
| Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
|
| BS ISO 6162-2-2002
| 液压传动.带对开夹或整体式法兰夹的法兰接头以及公制或英制螺钉.在压力为35MPa(350bar)至40MPa(400bar),DN1
| Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51
|
| BS ISO 6263-1997
| 液压流体动力.补偿式流量控制阀.安装面
| Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
|
| BS ISO 6264-1998
| 液压流体动力.减压阀.安装面
| Hydraulic fluid power - Pressure-relief valves - Mounting surfaces
|
| BS ISO 6547-2002
| 液压传动.缸筒.装有支撑环的活塞密封沟槽.尺寸和公差
| Hydraulic fluid power - Cylinders - Piston seal housings incorporating bearing rings - Dimensions and tolerances
|
| BS ISO 6605-2003
| 液压传动.软管及软管组件.试验方法
| Hydraulic fluid power - Hoses and hose assemblies - Test methods
|
| BS ISO 6743-4-1999
| 润滑剂、工业用润滑油和有关产品(L类).分类.第4部分:H族(液压系统)
| Lubricants, industrial oils and related products (class L) - Classification - Family H (hydraulic systems)
|
| BS ISO 6805-1995
| 井下采矿用橡胶软管和软管组件.采煤用钢丝加筋液压型.规范
| Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification
|
| BS ISO 6981-1996
| 液压流体动力.汽缸.杆端孔.安装尺寸
| Hydraulic fluid power - Cylinders - Rod end plain eyes - Mounting dimensions
|
| BS ISO 7181-1997
| 液压流体动力.汽缸.汽缸内径和连杆截面比
| Hydraulic fluid power - Cylinders - Bore and rod area ratios
|
| BS ISO 7241-2-2000
| 液压传动.快换接头.试验方法
| Hydraulic fluid power - Quick-action couplings - Test methods
|
| BS ISO 7314-2003
| 航空航天.液压系统.金属软管组件
| Aerospace - Fluid systems - Metal hose assemblies
|
| BS ISO 7425-1-2002
| 液压流体动力.弹性体塑料面密封件的汽缸.尺寸和公差.活塞密封汽缸
| Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Piston seal housings
|
| BS ISO 7425-2-2002
| 液压流体动力.弹性体塑料面密封件的汽缸.尺寸和公差.活塞杆密封汽缸
| Hydraulic fluid power - Housing for elastomer-energized, plastic-faced seals - Dimensions and tolerances - Rod seal housings
|
| BS ISO 7789-1998
| 液压流体动力.二孔、三孔和四孔拧入式卡盘阀.孔腔
| Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities
|
| BS ISO 7790-1998
| 液压流体动力.规格为02、03和05型的四孔模数叠阀和四孔定向控制阀.夹紧尺寸
| Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions
|
| BS ISO 8131-1996
| 液压流体动力.16MPa(160 bar)紧凑式系列单杆汽缸.公差
| Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Tolerances
|
| BS ISO 8132-2006
| 液压传动.单杆缸、16 MPa (160 bar)中型系列和25 MPa (250 bar)系列.附件安装尺寸
| Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Mounting dimensions for accessories
|
| BS ISO 8133-2006
| 液压传动.单杆缸、16 MPa(160 bar)小型系列.附件安装尺寸
| Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Mounting dimensions for accessories
|
| BS ISO 8135-1999
| 液压传动.160巴(16MPa)和250巴(25MPa)中型系列的单杆液压缸.公差
| Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Tolerances
|
| BS ISO 8137-1997
| 液压流体动力.250巴(25MPa)系列单杆汽缸.油口尺寸
| Hydraulic fluid power - Single rod cylinders, 250 bar (25 MPa) series - Port dimensions
|
| BS ISO 8434-3-2005
| 用于液压传动和一般用途的金属管接头.O形圈端面密封管接头
| Metallic tube connections for fluid power and general use - O-ring face seal connectors
|
| BS ISO/TS 13725-2001
| 液压动力.液压缸.临界载荷的测定方法
| Hydraulic fluid power - Cylinders - Method for determining the buckling load
|
| BS L 117-1975
| 铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:未经液压试验)(厚度小于10mm)
| Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
|
| BS L 118-1975
| 铝-镁(1.0)-硅(0.6)-铜(0.28)-铬(0.2)合金管规范(溶液处理和人工时效:液压试验)(壁厚度小于10mm)
| Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)
|
| BS M 55-1984
| 航空航天用液压管连接件和配件的回转弯曲试验方法
| Method for rotary flexure testing of hydraulic tubing joints and fittings for aerospace use
|
| BS M 61-1989
| 液压系统用“P”形卡箍(环形卡箍()轮廓尺寸规范
| Specification for envelope dimensions of "P" clamps (loop clamps) for fluid systems
|
| BS M 62-1987
| 轴线调准的液压系统管道的夹紧装置的设计和评定试验规范
| Specification for design and qualification testing of clamp blocks for fluid system tube lines having axial alignment - Metric series
|
| BS M 65-1987
| 压力补偿变量液压泵规范
| Specification for pressure compensated variable delivery hydraulic pumps
|
| BS M 66-1987
| 液压系统"Q"形夹(中心安装)尺寸规范
| Specification for dimensions of 'Q' clamps (centre-mounted clamps) for fluid systems
|
| BS PAS 32-2-1999
| 交付使用之前新升降机的检查和测试规范.液压升降机
| Specification for examination and test of new lifts before putting into service - Hydraulic lifts
|
| BS SP 115 to 117-1956
| 航空用液压表面止动型润滑脂嘴规范
| Specifications for hydraulic surface-check type lubricating nipples for aircraft
|
| BS T 72-T 73-1977
| 液压用18/10铬-镍耐腐蚀钢管规范(铌/钛稳定;550MPa)
| Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa)
|
| DD 225-1995
| 采用旋转磁盘摆动销对液压流体抗磨损性能的测定
| Determination of anti-wear properties of hydraulic fluids using the oscillating pin on rotating disc method
|
| DD ENV 13282-2000
| 液压道路粘合剂.组分、规范和符合性标准
| Hydraulic road binders. Composition, specifications and conformity criteria
|
| 编号 | 中文名称 | 英文名称 |
|---|