法国液压标准(NF hydraulic standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号中文名称英文名称
NF A49-300-4-2003 精密装置用钢管.交货技术条件.第4部分:液压和气压动力系统用无缝冷拉管 (Steel tubes for precision applications - Technical delivery conditions - Part 4 : seamless cold drawn tubes for hydraulic and pneumatic power systems.)
NF A49-330-1985 钢管.液压和气压传动系统用无缝冷拉钢管.尺寸.交货技术条件 (Steel tubes. Seamless cold-drawn tubes for hydraulic and pneumatic power systems. Dimensions. Technical delivery conditions.)
NF A49-866-1999 金属材料.管圈液压试验 (METALLIC MATERIALS. TUBE RING HYDRAULIC PRESSURE TEST. (EUROPEAN STANDARD EN 10275).)
NF A49-875-1-1996 钢管的无损检测.第1部分:证明液压密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验 (Non destructive testing of steels tubes. Part 1 : automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.)
NF A49-875-2-2000 钢管的无损检验.第2部分:检验液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管(埋弧焊除外)的自动涡流试验 (Non-destructive testing of steel tubes - Part 2 : automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of)
NF A84-330-1982 气焊设备.乙炔发生器用“防回气—断火”的液压安全阀和组合装置.规范和试验 (GAS WELDING EQUIPMENT. HYDRAULIC SAFETY SEALS AND COMBINED “NON-RETURN VALVE/FLAME ARRESTOR“ DEVICES FOR ACETYLENE GENERATORS. REQUIREMENTS AND TESTS.)
NF C18-440-2002 液压电缆切割装置.标称电压高达交流30KV的电气设施用设备 (Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV.)
NF C26-235-1-1994 电绝缘材料的液压稳定性的试验方法.第1部分:塑料薄膜 (Method of test for the hydrolic stability of electrical insulating materials. Part 1 : plastic films.)
NF C26-235-2-1998 电气绝缘材料.液压稳定性试验方法.第2部分:模制热固 (Electrical insulating materials. Methods of test for the hydrolytic stability. Part 2 : moulded thermosets.)
NF C46-520-1993 工业过程控制阀.第8部分:噪声问题.第2节:通过控制阀的液压流动产生的噪声的实验室测量 (Industrial-process control valves. Part 8 : noise considerations. Section 2 : laboratory measurement of noise generated by hydrodynamic flow through control valves.)
NF C46-522-1994 工业处理控制阀.第8部分:噪声条款.第4节:液压流动产生的噪声预定(EN 534-8-4) (Industrial-process control valves. Part 8 : noise considerations. Section 4 : prediction of noise generated by hydrodynamic flow.)
NF C55-420-1993 液压机(涡轮、存储泵和水泵-水轮机)的振动和脉动的现场测量指南 (Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storga pumps and pump-turbines).)
NF C55-493-2000 液压涡轮机,储存泵和泵涡轮.模型验收试验 (Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests.)
NF C55-562-2002 液压汽轮机控制系统规范指南 (Guide to specification of hydraulic turbine control systems.)
NF D36-401-2000 建筑阀门.液压安全装置组.试验和要求 (Building valves - Hydraulic safety groups - Tests and requirements.)
NF E04-056-1992 液压和气压传动.图解符号和电路图.第1部分:图解符号(ISO 1219-1-92) (Fluid power systems and components. Graphic symbols and circuit diagrams. Part 1 : graphic symbols.)
NF E04-057-1998 液压系统和元件.图形符号和电路图.第2部分:电路图 (Fluid power systems and components. Graphic symbols and circuits diagrams. Part 2 : circuit diagrams.)
NF E29-409-1992 工业阀门.气动的和液压的促动器.规范 (INDUSTRIAL VALVES. PNEUMATIC AND HYDRAULIC ACTUATORS. SPECIFICATIONS.)
NF E29-761-1988 气瓶.液压下裂开试验 (GAS CYLINDERS. HYDRAULIC BURSTING TEST.)
NF E38-423-1993 自然通风湿冷却塔.热性能,液压性能和声学性能的试验方法和验收条件 (NATURAL DRAFT WET COOLING TOWERS. TEST METHODS AND ACCEPTANCE CONDITIONS FOR THE THERMAL, HYDRAULIC AND ACOUSTIC PERFORMANCES.)
NF E44-051-2001 液体泵.安全要求.静液压试验过程 (Liquid pumps - Safety requirements - Procedure for hydrostatic testing.)
NF E44-090-1998 液压泵和液压泵组件.一般安全要求 (Pumps and pump units for liquids. Common safety requirements.)
NF E44-401-2000 旋转动力泵.液压性能验收试验.等级1和2 (Rotodynamic pumps - Hydraulic perforamnce acceptance tests - Grades and 2.)
NF E44-501-1991 小功率液压涡轮机.平台试验 (LOW POWER HYDRAULIC TURBINES. TESTS ON TEST RIG.)
NF E48-001-1995 液压传动.160bar单双杆液压缸.内径32-160mm.量规系列.设计和互换尺寸 (Hydraulic fuid power. 160 bar single and double-rod cylinders, bore 32 to 160 mm. French former series. Designation and interchangeability dimensions.)
NF E48-010-1984 液压传动.千斤顶.塞杆端部用内螺纹普通定位销和支座 (Hydraulic fluid power. Cylinder. Fork yoke and tenon for extremity of piston rod.)
NF E48-015-2001 液力传动.16MPa(160bar)系列单杆液压缸装配尺寸.第1部分:中型系列 (Hydraulic fluid power - Mounting dimensions for single rot cylinders, 16 MPa (160 bar) series - Part 1 : medium series.)
NF E48-016-2001 液力传动.16MPa(160bar)系列单杆液压缸装配尺寸.第2部分:小型系列 (Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2 : compact series.)
NF E48-025-1987 液压传动.250巴千斤顶.单杆.内径50到500mm.标牌和互换性尺寸 (Hydraulic fluid power. 250 bar single-rod cylinders. Bore from 50 to 500 mm.)
NF E48-030-2001 液动系统和元件.液压缸.装配尺寸和装配类型的识别标志 (Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types.)
NF E48-031-1998 液压气动.圆柱缸.标识 (Hydraulic fluid power. Cylinders. Designation.)
NF E48-032-2002 液力传动.液压缸.验收试验 (Hydraulic fluid power - Cylinders - Acceptance tests.)
NF E48-034-1990 液压传动.液压缸.小摩擦力活塞杆的密封壳.尺寸 (Hydraulic fluid power. Cylinders. Seal housing for low-friction rods. Dimensions.)
NF E48-036-1984 液压传动.千斤顶.铸铁活塞环和活塞室公差和尺寸 (HYDRAULIC FLUID POWER. CYLINDER. DIMENSIONS AND TOLERANCES OF CAST IRON PISTON RINGS AND OF THEIR HOUSINGS.)
NF E48-039-1987 液压传动.千斤顶.活塞导向环密封垫圈连接槽.尺寸 (Hydraulic fluid power. Cylinders. Seal-incorporating bearing ring housing for pistons. Dimensions.)
NF E48-050-1-1994 液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第1部分:载头壳体内具有O形环的油口 (Connections for fluid power and general use. Ports and stud ends with iso 261 threads and O-ring sealing. Part 1 : ports with O-ring seal in truncated housing.)
NF E48-050-2-1994 液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第2部分:重载(S系列)螺柱端头.尺寸 (Connections for fluid power and general use. Ports and stud ends with iso 261 threads and O-ring sealing. Part 2 : heavy-duty (S series) stud ends. Dimensions, design, test methods and requirements.)
NF E48-050-3-1994 液压传动的连接和一般应用.油口和具有ISO261螺纹和O型环密封的螺柱端头.第3部分:轻载(L系列)螺柱端头.尺寸 (Connections for fluid power and general use. Ports and stud ends with iso 261 threads and O-ring sealing. Part 3 : light-duty (L series) stud ends. Dimensions, design, test methods and requirements.)
NF E48-051-1992 液压传动.进气口上的步进管螺纹接头.接头尺寸 (Hydraulic fluid power. Pipe threaded connections for supply ports. Connecting dimensions.)
NF E48-052-1992 液压传动.液压缸.缸筒和活塞杆截面比 (Hydraulic fluid power. Cylinders. Bore and rod area ratios.)
NF E48-055-1-2003 液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘联接器.第1部分:压力为3.5MPa至35MPa(35bar至350ba (Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1 : flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN)
NF E48-055-1986 液压传动.法兰盘和银插入凸缘的矩形法兰和装置,公称压力250和400.尺寸 (Hydraulic fluid power. Rectangular flanges with recessed flange head. PN 250 and PN 400. Dimensions.)
NF E48-055-2-2003 液压传动.带分离式或一体式法兰夹和米制或英制螺纹的凸缘联接器.第2部分:压力为35MPa至40MPa(350bar至400ba (Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2 : flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN)
NF E48-056-2001 液压动力.在压力为20MPa(200bar)至压力为31,5MPa(315bar)使用的面对流型,快反应耦合型 (Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications.)
NF E48-057-1-2001 液压动力和一般用连接件.诊断用途的液压耦合件.第1部分:非压力连接耦合 (Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1 : coupling not for connection under pressure.)
NF E48-057-2-2001 液压动力和一般用连接件.诊断用途的液压耦合件.第2部分:压力连接的M16X2末端的耦合 (Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2 : coupling with M16 X 2 end for connection under pressure.)
NF E48-058-1-2001 液压动力.快速反应耦合.第1部分:尺寸和要求 (Hydraulic fluid power - Quick-action couplings - Part 1 : dimensions and requirements.)
NF E48-058-2-2001 液压动力.快速反应耦合.第2部分:试验方法 (Hydraulic fluid power - Quick-action couplings - Part 2 : test methods.)
NF E48-059-1991 液压和气压传动.起重器.活塞冲程的基本序列 (Fluid power systems and components. Cylinders. Basic series of piston strokes.)
NF E48-060-1992 液压和气压传动.千斤顶.活塞杆的端头.螺纹:尺寸和类型 (Fluid power. Cylinders. Piston rod thread dimensions and types.)
NF E48-064-1998 液压传动和一般用金属导管的连接.第1部分:24喇叭形压合接头 (Metallic tube connections for fluid power and general use. Part 1 : 24 degrees compression fittings.)
NF E48-064-4-2000 液压动力和一般应用的金属管连接.第4部分:由O型环焊接的24芯连接 (Metallic tube connections for fluid power and general use - Part 4 : 24 o cone connectors with O-ring weld-on nipples.)
NF E48-065-1-2000 一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第1部分:螺纹孔 (Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1 : threaded ports.)
NF E48-065-2-2000 一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第2部分:带弹性体密封的 (Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2 : stud ends with elastomeric sealing (type E).)
NF E48-065-3-2000 一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第2部分:带金属对金属密 (Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3 : stud ends with metal-to-metal sealing (type B).)
NF E48-080-1989 液压和气压传动.连接软管.词汇 (Fluid power. Hose assemblies. Vocabulary.)
NF E48-088-1999 橡胶和塑料软管组件.液压脉冲弯曲试验(半Ω 型试验) (Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test).)
NF E48-100-2000 液压传动系统和元件.标称压力 (Fluid power systems and components - Nominal pressures.)
NF E48-101-1984 液压传动.泵,发动机和变速器.量值的定义和用作符号的字母 (Hydraulic fluid power. Pumps, motors and integral transmissions. Parameter definitions and letter symbols.)
NF E48-151-2000 液压传动.带分离器的气压蓄能器.压力和容量范围、性能数据 (Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities.)
NF E48-152-1996 液压传动.气压蓄能器.气孔尺寸 (Hydraulic fluid power. Gas-loaded accumulators. Dimensions of gas ports.)
NF E48-153-1999 液压传动.带隔板的气载蓄能器.优先液压端口的选择 (HYDRAULIC POWER. GAS-LOADED ACCUMULATORS WITH SEPARATOR. SELECTION OF PREFERRED HYDRAULIC PORTS.)
NF E48-202-1996 机械安全.液力系统和部件的安全要求.液压装置(欧洲标准EN 982) (SAFETY OF MACHINERY. SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS. HYDRAULICS. (EUROPEAN STANDARD EN 982).)
NF E48-351-1974 液压传动系统.系统和元件的整理和包装规则 (HYDRAULIC FLUID POWER SYSTEMS.RULES FOR CONDITIONING AND PACKING SYSTEMS AND COMPONENTS)
NF E48-354-1989 液压传动.容积泵和容积汽缸功率的测定 (HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS.)
NF E48-361-1992 液压传动.变量或定量汽缸发动机.控制规范 (HYDRAULIC FLUID POWER. FIXED AND VARIABLE DISPLACEMENT MOTORS. SPECIFICATION WITH ODER.)
NF E48-381-2002 液压传动.马达特性的测定.第1部分:在恒低速和恒压力下的测定 (Hydraulic fluid power - Determination of characteristics of motors - Part 1 : at constant low speed and constant pressure.)
NF E48-382-2002 液压传动.马达特性的测定.第2部分:起动性 (Hydraulic fluid power - Determination of characteristics of motors - Part 2 : startability.)
NF E48-384-1992 液压动力.固定式活塞泵.由于AC级细粒粉尘污染引起的流动降缓.试验方法 (HYDRAULIC FLUID POWER. FIXED DISPLACEMENT PUMPS. FLOW DEGRADATION DUE TO CLASSIFIED AC FINE TEST DUST CONTAMINANT. TEST METHOD.)
NF E48-390-1997 液压传动.在系统和元件中对产生压力波动等级的测定.第1部分:泵精确度法 (HYDRAULIC FLUID POWER. DETERMINATION OF PRESSURE RIPPLE LEVELS GENERATED IN SYSTEMS AND COMPONENTS. PART 1 : PRECISION METHOD FOR PUMP.)
NF E48-391-2000 液压动力.系统和元件内产生的压力波动水平的测定.泵用简化方法 (Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Simplified method for pumps.)
NF E48-392-1-2002 液压传动.元件和系统中液载噪音特性的测定.第1部分:绪论 (Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 1 : introduction.)
NF E48-392-2-2001 液压传动.元件和系统中液载噪音特性的测定.第2部分:管道液流中声音速度的测量 (Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2 : measurement of the speed of sound in a fluid in a pipe.)
NF E48-400-1996 液压传动.阀门装配面及盒式阀腔的识别标志 (HYDRAULIC FLUID POWER. CODE FOR IDENTIFICATION OF VALVE MOUNTING SURFACES AND CARTRIDGE VALVE CAVITIES.)
NF E48-412-1995 液压系统和元件.带接地的双脚电插头.特性和要求 (Fluid power systems and components. Two-pin electrical plug connectors with earth contact. Characteristics and requirements.)
NF E48-423-2001 液压传动.减压阀、顺序阀、卸载阀、节流阀和止回阀.装配面 (Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces.)
NF E48-432-1993 液压动力.4和5阀口伺服阀.安装面 (HYDRAULIC FLUID POWER. POUR- AND FIVE-PORTS SERVOVALVES. MOUNTING SURFACES.)
NF E48-435-1998 液压传动.尺寸02、03和05的四端口模式排气阀和四端口方向控制阀.夹紧尺寸 (Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05. Clamping dimensions.)
NF E48-501-1994 液压传动.160bar中型系列和250bar气缸.附件安装尺寸 (Hydraulic fluid power. Cylinders, 160 bar medium series and 250 bar. Mouting dimensions for accessories.)
NF E48-503-1987 液压传动.千斤顶.160bar小型A千斤顶活塞杆端头的球头销定 (HYDRAULIC FLUID POWER. CYLINDER. ROD END SPHERICAL EYE FOR 160 BAR SINGLE-ROD CYLINDER,COMPACT SERIE A.)
NF E48-505-1988 液压传动.160巴小型系列液压缸.B型V形撑架 (HYDRAULIC FLUID POWER. CYLINDER 160 BAR COMPACT SERIE. CLEVIS BRACKET FORM B.)
NF E48-550-1998 液压传动系统.O型环遮蔽罩.旋转轴或扩孔器遮蔽罩的设计 (Fluid power systems. O-ring housings. Design of housing for static assemblies in shaft or bore.)
NF E48-560-1997 液压驱动系统.环行垫圈罩.轴向装配设计 (FLUID POWER SYSTEMS. O-RING HOUSINGS. AXIAL ASSEMBLY DESIGNS.)
NF E48-602-1982 润滑油,工业油和相关产品.L级.分类.H系列液压系统 (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS. CLASS L. CLASSIFICATION. FAMILLE H. “HYDRAULIC SYSTEM“.)
NF E48-612-1973 液压传动用流体.A和C级难燃流体pH值的测定 (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF PH VALUES OF FIRE-RESISTANT FLUIDS,FORMS A AND C)
NF E48-613-1973 液压传动用流体.D级难燃流体蒸汽压力的测定 (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF VAPOUR PRESSUREOF FIRE-RESISTANT FLUIDS,FORM D)
NF E48-614-1973 液压传动用流体.难燃流体脱气能力测定 (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF DEAERATION ABILITY OF FIRE-RESISTANT FLUIDS)
NF E48-615-1973 液压传动用流体.A和B级难燃流体乳化稳定性测定 (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF EMULSION STABILITY OF FIRE-RESISTANT FLUIDS,FORMS A AND B)
NF E48-617-1974 液压传动用流体.难燃流体和HM及HV级矿物油.耐磨性能 (FLUIDS FOR HYDRAULIC POWER SYSTEMS-FIRE RESISTANT FLUIDS AND MINERAL OILS,FORMS HM AND HV - ANTI-WEAR PROPERTIES)
NF E48-618-1973 液压传动用流体.用难燃流体屏幕在高压射流下可燃性的测定 (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF IGNITABILITY OFFIRE-RESISTANT FLUIDS ATOMIZED UNDER HIGH PRESSURE WITH SCREEN)
NF E48-620-1973 液压传动用流体.碳尘埃和难燃流体混合物中火焰蔓延性的测定 (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF FLAME-PROPAGATION IN A MIXTURE OF FIRE-RESISTANT FLUIDS WITH COAL-DUST)
NF E48-640-1973 液压传动用流体.难燃流体使用须知 (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DIRECTIONS FOR USE OF FIRE-RESISTANT FLUIDS)
NF E48-651-2002 液压传动.液压液污染.用光学显微镜计数法测定粒状污染物 (Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope.)
NF E48-652-1990 液压传动用流体.用重量法测定粉尘总污染 (Hydraulic fluid power. Fluids. Determination of overall particulate contamination by the gravimetric method.)
NF E48-658-1990 液压传动.流体.利用光干扰自动计数法对粉末污染的测定 (HYDRAULIC FLUID POWER. FLUIDS. DETERMINATION OF PARTICULATE CONTAMINATION BY AUTOMATIC COUNTING USING THE LIGHT INTERRUPTION PRINCIPLE.)
NF E48-659-2003 液压传动.部件和元件的清洁度.与污物收集、分析和数据报告相关的检验文件和原则 (Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting.)
NF E48-660-1991 液压传动.流体.用光学显微镜和图象分析测定固体粉尘污染 (HYDRAULIC FLUID SYSTEMS. FLUIDS. DETERMINATION OF SOLID PARTICULATE CONTAMINATION BY OPTICAL MICROSCOPE AND IMAGE ANALYSIS.)
NF E48-670-2003 液压传动.滤芯.性能特征鉴定的试验序列 (Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics.)
NF E48-675-1988 液压传动.过滤元件.用流量循环变化的疲劳试验检验过滤元件的特性 (Hydraulic fluid power. Filter elements. Resistance to the fatigue due to cyclic flow variations.)
NF E48-678-1995 液压传动.接收器口及压力输送用过滤器.性能 (Hydraulic fluid power. Filters for receiver venting and pressurization. Performances.)
NF E48-679-1990 液压传动.过滤器.绝对过滤额定值的测定 (HYDRAULIC FLUID POWER. FILTER ELEMENTS. DETERMINATION OF ABSOLUTE FILTRATION RATING.)
NF E48-685-2000 液压动力.过滤元件的过滤性能的评价多途径方法 (Hydraulic fluid power - Multi-pass method for evaluating filtration performance of a filter element.)
NF E48-690-1990 液压传动.流体.矿物油过滤性的测定 (Hydraulic fluid power. Fluids. Measurement of filtrability of mineral oils.)
NF E48-691-1995 液压传动.液体.存在于水中的矿物油的可滤性测量 (Hydraulic fluid power. Fluids. Measurement of filtrability of minerals oils in the presence of water.)
NF E48-692-1997 液压传动.液体.HFC和HFD类防火液体的可滤性测量 (Hydraulic fluid power. Fluids. Measurement of filtrability of HFC and HFD class fire resistant fluids.)
NF E48-695-2003 液压传动.零部件.微粒污染测量结果的表示 (Hydraulic fluid power - Parts and components - Expression of particulate pollution measurement results.)
NF E48-701-1993 液压传动.滤油器.定义、标定压力、标定尺寸、配件尺寸 (Hydraulic fluid power. Filters. Definitions, nominal pressures, nominal sizes, fitting dimensions.)
NF E48-702-1993 液压传动.滤油器元件和滤油器腔.特性和要求 (Hydraulic fluid power. Filter elements and filter housings. Characteristics, requirements.)
NF E48-703-1993 液压传动.串联过滤器用过滤器元件.尺寸 (Hydraulic fluid power. Filtr elements for inline filters. Dimensions.)
NF E48-704-1995 液压传动.箱顶回流过滤器用过滤器元件.尺寸 (Hydraulic fluid power. Filter elements for tank top return filters. Dimensions.)
NF E48-705-1998 液压动力.水箱顶部回转线滤膜.滤膜尺寸 (Hydraulic fluid power. Tank top return-line filter. Fitting dimensions.)
NF E49-001-1992 液压动力.8bar巴单和双端带活塞杆气缸.孔径为25mm-200mm.安装尺寸的互换性 (Pneumatic fluid power. 8 bar single and double-ended piston rod cylinders. Bores from 25 mm up to 200 mm. Interchangeability and mounting dimensions.)
NF E49-004-1-1998 液压动力.10bar气缸.袖珍系列,缩小冲程.尺寸互换性.第1部分:内径由20MM-63MM的信号反应气缸. (PNEUMATIC FLUID POWER. 10 BAR CYLINDERS, COMPACT SERIES, REDUCED STROKE, INTERCHANGEABILITY DIMENSIONS. PART 1 : SINGLE ACTING CYLINDERS, BORES FROM 20 MM TO 63 MM.)
NF E49-004-2-1998 液压动力.10bar气缸.袖珍系列,缩小冲程.尺寸互换性.第2部分:内径由20MM-100MM的双反应气缸. (PNEUMATIC FLUID POWER. 10 BAR CYLINDERS, COMPACT SERIES, REDUCED STROKE, INTERCHANGEABILITY DIMENSIONS. PART 2 : DOUBLE ACTING CYLINDERS, BORES FROM 20 MM TO 100 MM.)
NF E49-600-1988 液压动力系统和元件.液力逻辑路线.第1部分:二进制逻辑及有关功能符号 (Fluid-power systems and components. Fluid logic circuit. Part 1 : symbols for binary logic and related functions.)
NF E49-601-1990 液压和气压传动.液力逻辑线路.第2部分:与逻辑符号相对应的供液和排液符号 (Fluid power systems and components. Fluid logic circuits. Part 2 : symbols for supply and exhausts as related to logic symbols.)
NF E49-602-1990 液压和气压传动.液力逻辑电路.第3部分:逻辑程序和相关函数图形 (Fluid power systems and components. Fluid logic circuit. Part 3 : symbols for logic sequencers and related functions.)
NF E52-071-1982 液压自动升降式栏板.一般安全规则 (HYDRAULIC LIFTING BACK DOORS. GENERAL SAFETY RULES.)
NF E52-072-1990 起重机.液压装置.设计和实施规则 (LIFTING EQUIPMENT. HYDRAULIC EQUIPMENT. DESIGN AND CONSTRUCTION RULES.)
NF E56-003-1-2002 地下采矿用机械.液压矿顶支撑物的安全要求.第1部分:支撑物设施的一般要求 (Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1 : support units and general requirements.)
NF E56-003-2-2002 地下采矿用机械.液压矿顶支撑物的安全要求.第2部分:动力支架和推杆 (Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2 : power set legs and rams.)
NF E58-010-1995 土方机械.液压挖掘机.术语及商品规格 (EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS. TERMINOLOGY AND COMMERCIAL SPECIFICATIONS.)
NF E58-073-1995 土方机械.液压挖掘机.机械过加载的测量方法 (EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS. METHODS OF MEASURING TOOL FORCES.)
NF E58-077-1989 土方机械.液压挖土机.反铲测定体积评价 (EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS AND BACKHOE LOADERS. VOLUMETRIC RATING FOR HOE BUCKET. COMPLETE METHOD.)
NF E58-100-1996 土方机械.安全.第5部分:液压开凿机要求(欧洲标准EN 474-5) (Earth-moving machinery. Safety. Part 5 : requirements for hydraulic excavators.)
NF E58-151-1997 土方机械.液压挖掘机和反铲装载机悬臂降低控制装置.要求和试验 (EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATOR AND BACKHOE LOADER BOOM LOWERING CONTROL DEVICE. REQUIREMENTS AND TESTS.)
NF E58-153-1995 土方机械.液压挖掘机.提升能力 (EARTH-MOVING MACHINERY. HYDRAULIC EXCAVATORS. LIFT CAPACITY.)
NF E63-021-2001 机床.安全.液压 (Machine-tools - Safety - Hydraulic presses.)
NF E63-022-2001 机床的安全.液压制动 (Safety of machine tools - Hydraulic press brakes.)
NF E64-115-1986 木材加工机械.液压立式包装或填料用木质纤维制造机.术语 (WOODWORKING MACHINES. MACHINES FOR WOOD WOOL PRODUCTION HYDRAULIC. NOMENCLATURE.)
NF E90-220-1991 产生振动用伺服-液压试验装置.特性描述方法 (Servo-hydraulic test equipment for generating vibration. Method of describing characteristics.)
NF F01-411-1995 铁路车辆.铁路车辆或相关耐久滑行引导车用的液压阻尼器 (RAILWAY ROLLING STOCK. HYDRAULIC DAMPERS FOR RAILWAY OR RELATED PERMANENT GUIDING VEHICLES.)
NF F02-049-1969 铁路车辆.锁紧连接的液压紧固和放松. 喷油导管 (RAILWAY TRANSPORT EQUIPMENT. OIL INJECTION DUCTS FOR HYDRAULIC SCOTCHING AND UNSCOTCHING OF TIGHTENED ASSEMBLIES.)
NF F02-049M1-1977 铁路车辆.锁紧连接的液压紧固和松释喷油导管 ()
NF F11-010-1998 铁路车辆.液压动力系统.图解符号 (RAILWAY ROLLING STOCK. FLUID POWER SYSTEMS. GRAPHIC SYMBOLS.)
NF G07-057-1992 纺织品.耐渗水性的测定.液压试验 (Textiles. Determination of resistance to water penetration. Hydrostatic pressure test.)
NF G37-116-2-2003 橡胶或塑料涂层织物.破裂强度测定.第2部分:液压法 (Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2 : hydraulic method.)
NF G38-143-2000 土工织物及其相关产品.耐透水性的测定(静态液压试验) (Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydrostatic pressure test).)
NF H00-071-1986 液体运输包装.轻金属包装.金属或塑料包装.混合包装.液压试验.操作方式 (PACKAGING FOR THE TRANSPORT OF LIQUIDS. LIGHT GAUGE METAL PACKAGING. METALIC OR PLASTIC PACKAGING. COMPOSITE PACKAGING WATER PRESSURE TEST. PROCEDURE.)
NF J42-110-1952 造船工业.内部排水.液压排水器 (SHIPBUILDING. INTERNAL SCUPPERS. HYDRAULIC SCUPPERS.)
NF J95-027/A1-2000 小艇.液压掌舵系统 (Small craft - Hydraulic steering systems.)
NF L17-022-1999 航空航天系列.非金属材料.油类、液压油和燃料.液体层析法特征 (AEROSPACE SERIES. NON-METALLIC MATERIALS. OILS, HYDRAULIC FLUIDS, FUELS. CHARACTERISATION BY LIQUID CHROMATOGRAPHY.)
NF L40-120-1983 液压系统.米制接头的接触面 (FLUID SYSTEMS. INTERFACE OF METRIC COUPLINGS.)
NF L40-200-1967 飞机上液压管路的标记 (MARKING OF FLUID CIRCUITS IN AIRCRAFT.)
NF L40-211-1989 飞行器.液压元件.表说明经批准的元件流量的标记 (AIRCRAFT. HYDRAULIC COMPONENETS. MARKING TO INDICATE FLUID FOR WHICH COMPONENTS IS APPROVED.)
NF L41-101-1982 固体微粒造成的液压管路的污染.概述 (CONTAMINATION OF HYDRAULIC SYSTEMS BY SOLID PARTICULATE MATTER. GENERAL.)
NF L41-102-1982 固体微粒造成的液压管路的污染.检验方法 (CONTAMINATION OF HYDRAULIC SYSTEMS BY SOLID PARTICULATE MATTER. INSPECTION METHODS.)
NF L41-212-1983 液压系统.管子和接头的热冲击试验 (FLUID SYSTEMS. THERMAL SHOCK TESTING OF PIPING AND FITTINGS.)
NF L41-230-1985 飞行器.液压管路组装和接头.旋转弯曲试验 (AIRCRAFT. HYDRAULIC TUBING JOINTS AND FITTINGS. ROTARY FLEXURE TEST.)
NF L45-201-1991 航空和航天.恒排量液压马达.总规范 (Aerospace. Constant displacement hydraulic motors. General specifications.)
NF L92-310-1977 液压千斤顶的支点 (JACKING PADS.)
NF M82-426-1987 煤矿器材.液压传送接头.尺寸和特性 (Coal mine equipment. Connections for hydraulic transmissions. Sizes and characteristics.)
NF P14-201-1/A1-1998 DTU 26.2.建筑工程.带有液压粘合剂的样板和板梁.第1部分:技术规范 (DTU 26.2 - Building works - Screeds and slabs with a base of hydraulic binders - Part 1 : technical specifications.)
NF P14-201-1/A2-2000 DTU 26.2.建筑工程.带有液压粘合剂的样板和板梁.第1部分:技术规范 (DTU 26.2 - Building works - Screeds and slabs with a base of hydraulic binders - Part 1 : technical specifications.)
NF P14-201-1/A3-2003 DTU 26.2.建筑工程.有液压粘合剂座的找平层和平板.第1部分:技术规范 (DTU 26.2 - Building works - Screeds and slabs with a base of hydraulic binders - Part 1 : technical specifications.)
NF P15-108-2000 液压胶合剂.液压道路胶合剂.组成、规范和合格标准 (Hydraulic binders - Hydraulic road binders - Composition, specifications and conformity criteria.)
NF P16-101-1999 用于液压交换管道,排水系统和废水组份测定的一般要求.(欧洲标志EN773) (General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers.)
NF P16-150-4-1997 建筑物外部的排污系统.第4部分:液压设计和环境考虑 (DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS. PART 4 : HYDRAULIC DESIGN AND ENVIRONMENTAL CONSIDERATIONS. (EUROPEAN STANDARD EN 752-4).)
NF P18-242-2003 土木工程和路面结构用非粘合和液压粘合材料用集料 (Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction.)
NF P18-411-1981 混凝土.硬材料弯曲.压缩和拉力试验用液压机的一般特性 (Concretes. Common characteristics of hydraulic machines for compression, bending, and tension testing of hard materials.)
NF P18-412-1981 混凝土.硬材料压缩试验用液压机的特殊性能 (Concretes. Individual properties of hydraulic machines for compression tests. (presses for hard materials).)
NF P18-413-1981 混凝土.硬材料弯曲试验用液压机的特殊性能 (Concretes. Individual properties of hydraulic machines for bending tests of hard materials.)
NF P82-310-1998 电梯制造和安装的安全规则.第2部分:液压式电梯 (Safety rules for the construction and installation of lifts. Part 2 : hydraulic lifts.)
NF P82-311-1988 载客电梯和货物电梯.现在建筑物内液压电梯的建筑和安装安全规则 (PASSENGER LIFTS AND SERVICE LIFTS. SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF HYDRAULIC LIFTS IN EXISTING BUILDINGS.)
NF P82-410-2001 电梯建筑和安装的安全规则.第3部分:电动和液压电梯 (Safety rules for the construction and installation of lifts - Part 3 : electric and hydraulic service lifts.)
NF P98-250-6-1991 路面试验.碳水混合物的制备.第6部分:通过静液压称重测量试件表面密度 (TESTS RELATING TO PAVEMENTS. PREPARATION OF BITUMINOUS MIXTURES. PART 6 : MEASUREMENT OF THE APPARENT SPECIFIC GRAVITY OF A SPECIMEN USING THE HYDROSTATIC METHOD.)
NF P98-732-1-2001 道路施工和维护设备.粒状混合物散布机.混合物制造和质量控制.第1部分:液压粘结剂处理的或未经处理的材料用 (Road construction and maintenance equipment - Manufacture of mixtures and quality control - Part 1 : mixing plants for hydraulic binder treated or untreated materials.)
NF P98-791-2001 道路维护设备和产品.适用于洒盐机和扫雪车的液压驱动装置.特性和规范 (Road maintenance equipment and products - Hydraulic drive device adapted into salt speader and snow clearing blade carrying vehicles - Characteristics and specifications.)
NF P98-798-1998 高速公路冬季维修设备和高速路路边设备维修.液压混合机,技术规范和性能 (Highways winter maintenance plant and highways side equipment maintenance. Hydroseeders. Technical specifications and performances.)
NF R12-618-1997 道路车辆.使用非石油基液压液的液压制动系统软管组件 (Road vehicles. Brake hose assemblies for hydraulic braking systems used with a non-petrolum-base brake fluid.)
NF R12-619-1997 道路车辆.使用石油基液压液的液压制动系统制动软管总成 (Road vehicles. Brake hose assemblies for hydraulic braking systems used with a petrolum-base brake fluid.)
NF R12-636-1998 道路车辆.液压制动系统.导管、螺纹孔、外螺纹接头和软管管端接头 (Road vehicles. Hydraulic braking systems. Simple flare pipes, tapped holes, male fittings and hose end fittings.)
NF R12-642-1991 道路车辆.液压制动器.非石油为基础的参考液体 (Road vehicles. Hydraulic braking systems. Non-petroleum base reference fluids.)
NF R12-644-1990 道路车辆.液压制动.ISO石油基标准液体 (Road vehicles. Hydraulic brake systems. ISO reference petroleum base fluid.)
NF R12-645-1987 道路车辆.使用石油基液压制动液(最高工作温度120℃)C)的鼓式闸轮液压缸用弹性O形密封圈 (Road vehicles. Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.).)
NF R12-646-1987 道路车辆.使用石 油基液压制动液(最高工作温度120℃)C)的液压制动系统用弹性环和密封件 (ROAD VEHICLES. ELASTOMERIC CUPS AND SEALS FOR CYLINDERS FOR HYDRAULIC BRAKING SYSTEMS USING A PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 DEGRES C MAX.).)
NF R12-647-1987 道路车辆.使用石油基液压制动液(最高工作温度120℃)C)的盘式制动液压缸用弹性密封件 (Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max).)
NF R12-648-1987 道路车辆.使用石油基液压制动液(最高工作温度120℃)C)的鼓式闸轮液压缸用弹性套 (ROAD VEHICLES. ELASTOMERIC BOOTS FOR DRUM TYPE HYDRAULIC BRAKE WHEEL CYLINDERS USING A PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 DEGREES C MAX).)
NF R12-651-1984 道路车辆,液压制动设备的压力传感器 (Road vehicles. Hydraulic pressure test connection for braking equipment.)
NF R12-652-1991 道路车辆.液压传动制动装置.制动性能的测定 (ROAD VEHICLES. HYDRAULIC BRAKING SYSTEMS. MEASUREMENT OF BRAKING PERFORMANCE.)
NF R17-104-1984 道路车辆.液压式抓斗.安全装置 (ROAD VEHICLES. DUMP TRUCKS. SAFETY ARRANGEMENTS.)
NF R17-107-2001 道路车辆.可卸换翻斗的液压悬臂式车辆.安全要求 (Road vehicles - Vehicles equipped with hydraulic arms for removable skips - Safety requirements.)
NF R17-108-2001 道路车辆.液压悬臂式可卸换翻斗.功能尺寸和一般要求 (Road vehicles - Removable skips for hydraulic arms - Functional dimensions and general requirements.)
NF R47-101-1979 带翻斗挂车的液压耦合器 (Hydraulic coupling for trailer vehicles equipped with dumping bodies.)
NF S31-014-1982 声学.供水设施用液压设备和阀门噪音的实验室测量.第1部分:测量方法 (ACOUSTICS. LABORATORY TESTS ON NOISE FORM TAPWARE AND HYDRAULIC EQUIPMENT USED IN WATER INSTALLATIONS. PART 1 : METHOD OF MEASUREMENT.)
NF S61-571-1989 救护和消防的设备.液压单动器具和切割工具.特性.尺寸、功能和试验 (RESCUE AND FIRE FIGHTING EQUIPMENT. HYDRAULIC-OPERATED DOUBLE ACTING APPARATUS SPREADERS AND CUTTING TOOLS. DIMENSIONAL AND FONCTIONAL CHARACTERISTICS AND TESTS.)
NF S61-572-1989 救护和消防的设备.液压单动器具和切割工具.特性.尺寸、功能和试验 (RESCUE AND FIRE FIGHTING EQUIPMENT. HYDRAULIC-OPERATED SINGLE ACTING APPARATUS SPREADERS AND CUTTING TOOLS. DIMENSIONAL AND FONCTIONAL CHARACTERISTICS AND TESTS.)
NF T47-202-1996 橡胶和塑料软管及软管组件.液压静力试验(欧洲标准EN ISO 1402) (Rubber and plastics hoses and hose assemblies. Hydrostatic testing.)
NF T47-259-1996 橡胶软管和软管组件.织物增强的液压型.规范 (Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification.)
NF T47-270-1997 橡胶软管和软管组件.液压型橡胶包皮螺旋金属线增强.规范 (Rubber hoses and hose assemblies. Rubber-covered spiral wire reinforced hydraulic type. Specification.)
NF T47-281-1997 橡胶软管和软管组件.液压型金属丝编织物增强.规范 (Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification.)
NF T47-286-1998 橡胶或塑料软管和软管组件.无柔性液压脉冲试验.欧洲标准EN ISO 6803) (Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing.)
NF T47-288-1997 橡胶软管和软管组件.液压装置用小型金属丝编织物增强.规范 (Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification.)
NF T48-107-1994 密封用石棉和橡胶压缩薄板.常温下抗液压强度试验 (ASBESTOS AND RUBBER COMPRESSED SHEETS FOR SEALS. RESISTANCE TO HYDRAULIC PRESSURE AT AMBIENT TEMPERATURE.)
NF T54-012-1995 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头.外部液压条件下防漏密封试验方法 (PLASTICS PIPING SYSTEMS. ELASTOMERIC SEALING RING TYPE JOINTS AND MECHANICAL JOINTS FOR THERMOPLASTICS PRESSURE PIPING. TEST METHOD FOR LEAKTIGHTNESS UNDER EXTERNAL HYDROSTATIC PRESSURE. (EUROPEAN STANDARD EN 911).)
NF T54-900-2003 塑料管道和导管系统.用外推法测定热塑性塑料管道的长期静液压强度 (Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation.)
NF T54-932-1997 塑料管道系统.注模热塑配件配件、阀和附属设备.管道元件注模用热塑材料长期液压强度的测定 (Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components.)
NF T60-513-2003 润滑剂、工业润滑油和相关产品(L类).分类.第4部分:H组(液压系统) (Lubricants, industrial oils and related products (class L) - Classification - Part 4 : family H (hydraulic systems).)
NF T60-525-1998 润滑油、工业用油和相关产品(L级).H族(液压系统).目录HH、HL、HN、HR、HV和HG规范 (Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HR, HV and HG.)
NF T60-526-2002 润滑油、工业油及有关产品(L级).H系列(液压系统).HFAE、HFAS、HFB、HFC、HFDR和HFDU类别规范 (Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU.)
NF T81-010-1976 液态化学产品的运输和装卸.内河航行罐船.产品的液压泵输送.安全装置 (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS. TANKERS FOR INLAND NAVIGATION. PUMP TRANSFER OF PRODUCTS. SAFETY DEVICE.)
NF T81-021-1977 液化气的运输和装卸.内河航行罐船.运输过程中的安全.电力-液压-气动控制应急设备 (TRANSPORTATION AND HANDLING OF LIQUEFIED GASES. TANKERS FOR USE ON INLAND WATERWAYS. SAFETY DURING TRANSFERT OPERATIONS. INTERVENTION DEVICE WITH ELECTRO-HYDRO-PNEUMATIC CONTROL.)
NF U14-405-1997 农用拖拉机.器具用液压动力 (Agricultural tractors. Hydraulic pressure for implements.)
NF U14-406-1992 农业拖拉机和机械.通用快速动作液压接头 (Agricultural trators and machinery. General purpose quick-action hydraulic couplers.)
NF U14-407-1997 农用拖拉机和农业机械.遥控液压传动装置和控制装置的编码 (AGRICULTURAL TRACTORS AND MACHINERY. CODING OF REMOTE HYDRAULIC POWER SERVICES AND CONTROLS.)
NF U16-006-1984 农林用拖拉机和器材.液压离合器 (Tractors and machinery for agriculture and forestry. Hydraulic couplings. Braking circuit.)
NF U26-112-1997 作物保护设备.喷洒设备.第2部分:液压喷洒机的试验方法 (Equipment for crop protection. Spraying equipment. Part 2 : test methods for hydraulic sprayers.)
NF V32-070-1-1995 辣椒及其含油树脂.用液压色谱分析法测定总辣椒素 (Chillies and chilli oleoresins. Determination of total capsaicinoid content. Part 1 : spectrometric method.)
NF X50-001-5-4-1998 动力站设备的征购指南.第5-4部分:涡轮机.液压涡轮机.储存泵和泵涡轮机 (Guide for procurement of power station equipment. Part 5-4 : turbines. Hydraulic turbines, storage pumps and pump-turbines.)
编号中文名称英文名称

返回