编号 | 中文名称 | 英文名称 |
BS 3900-J13-2001
| 涂料的试验方法.涂覆粉试验.用激光衍射法分析粒径
| Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction
|
BS 5381-2-1998
| 烟草和烟草制品物理特性测定方法.第2部分:用激光束测量仪器测定卷烟和滤嘴标准直径
| Methods for determination of physical properties of tobacco and tobacco products - Nominal diameter of cigarettes and filter rods using a laser beam measuring apparatus
|
BS 6955-1-1994
| 振动和冲击传感器的校准.采用激光干涉测量法对主振动的校准方法
| Calibration of vibration and shock pick-ups - Methods for primary vibration calibration by laser interferometry
|
BS 7334-6-1992
| 建筑施工用测量仪器.第6部分:激光仪器使用精度的测定方法
| Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
|
BS DD IEC/PAS 61280-2-10-2003
| 纤维光学通信子系统试验程序.数字系统.激光发射机的时间分辨线性调频脉冲和α因数测量
| Fibre optic communication subsystem test procedures - Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters
|
BS EN 12254-1999
| 激光工作场所用屏幕.安全要求和试验
| Screens for laser working places - Safety requirements and testing
|
BS EN 12584-1999
| 氧气火焰切割、激光束切割和等离子体切割缺陷.术语
| Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
|
BS EN 15042-1-2006
| 覆层厚度测量和表面波纹表征.采用激光感应表面声波法对各膜层的弹性常数、密度和厚度的测定指南
| Thickness measurement of coatings and characterization of surfaces with surface waves - Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves
|
BS EN 207-1999
| 眼睛保护.抗激光辐射用滤光镜和护目器(激光护目镜)
| Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors)
|
BS EN 208-1999
| 眼睛防护.激光和激光系统调节工作用护目镜(激光调节护目镜)
| Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
|
BS EN 2266-005-2005
| 航空航天系列.通用电缆.操作温度为-55 °C 到 200 °C .紫外激光可印刷.产品标准
| Cables, electrical, for general purpose — Operating temperatures between??-55 ℃ and 200 ℃ — Part 005: UV laser printable — Product standard
|
BS EN 2266-007-2005
| 航空航天系列.通用电缆.操作温度为-55 °C 到 200 °C .紫外激光可印刷多芯装套电缆.产品标准
| Cables, electrical, for general purpose — Operating temperatures between –55 ℃ and 200 ℃ — Part 007: UV laser printable multicore jacketed cable — Product standard
|
BS EN 2267-007-2005
| 航空系列.一般用途的电缆,电器.-55°C和260°C之间的操作温度.DMA族、单个可打印紫外激光和多芯附件.产品标
| Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 007: DMA family, single ink-jet printable and multicore assembly — Product standard
|
BS EN 2267-008-2005
| 航空系列.一般用途的电缆,电器.-55°C和260°C之间的操作温度.DM族、单个可打印紫外激光和多芯附件.产品标
| Cables, electrical, for general purpose — Operating temperatures between -55 °C and 260 °C — Part 008: DM family, single UV laser printable and multicore assembly — Product standard
|
BS EN 2267-009-2005
| 航空系列.一般用途的电缆,电器.-55℃和260℃之间的操作温度.DRA族、单个可打印UV激光和多芯附件.产品标准
| Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 009: DRA family, single and multicore assembly — Product standard
|
BS EN 2267-010-2005
| 航空系列.一般用途的电缆,电器.-55℃和260℃之间的操作温度.DM族、单个可打印UV激光.产品标准
| Cables, electrical, for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 010: DR family, single UV laser printable — Product standard
|
BS EN 2713-007-2005
| 航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和200 °C之间.屏蔽式(螺旋式)和有护套的可印
| Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Screened (spiral) and jacketed, UV laser printable - Product standard
|
BS EN 2714-007-2005
| 航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.屏蔽式(螺旋式)和有护套的可印
| Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 007: Screened (spiral) and jacketed, UV laser printable — Product standard
|
BS EN 2714-011-2005
| 航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.DM族、屏蔽式(螺旋式)和有护套
| Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 011: DM family, screened (spiral) and jacketed, UV laser printable — Product standard
|
BS EN 2714-012-2005
| 航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.DM族、屏蔽式(麻花型)和有护套
| Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 012: DM family, screened (braided) and jacketed, UV laser printable — Product standard
|
BS EN 2714-013-2005
| 航空航天系列.单芯和多芯电缆的一般用途.操作温度在-55 °C 和260 °C之间.DM族、屏蔽式(螺旋式)和有护套
| Cables, electrical, single and multicore for general purpose — Operating temperatures between -55 ℃ and 260 ℃ — Part 013: DR family, screened (spiral) and jacketed, UV laser printable — Product standard
|
BS EN 31253-1996
| 激光和相关设备.激光装置.机械接口
| Lasers and laser-related equipment - Laser device - Mechanical interfaces
|
BS EN 3475-706-2005
| 航空航天系列.飞行器用电缆.试验方法.激光可标记性
| Cables, electrical, aircraft use — Test methods — Part 706: Laser markability
|
BS EN 60601-2-22-1996
| 医疗电气设备.安全专门要求.激光诊断和治疗设备规范
| Medical electrical equipment - Particular requirements for safety - Specification for diagnostic and therapeutic laser equipment
|
BS EN 60825-1-1994
| 激光产品的辐射安全性.第1部分:设备分类、要求和用户指南
| Safety of laser products - Equipment classification, requirements and user's guide
|
BS EN 60825-12-2004
| 激光产品的安全.用于信息传输的自由空间光通信系统的安全
| Safety of laser products - Safety of free space optical communication systems used for transmission of information
|
BS EN 60825-2-2004
| 激光产品的安全.光纤通信系统的安全
| Safety of laser products - Safety of optical fibre communication systems (OFCS)
|
BS EN 60825-4-1998
| 激光产品安全.激光防护装置
| Safety of laser products - Laser guards
|
BS EN 60856-1993
| 50HZ/625行预录式光反射视盘录像系统"激光视盘".PAL制规范
| Specification for pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines - PAL
|
BS EN 61040-1993
| 激光辐射功率和能量探测器、仪表和设备规范
| Specification for power and energy measuring detectors, instruments and equipment for laser radiation
|
BS EN 61096-1993
| 数字激光唱机用放音设备特性测量方法
| Methods of measuring the characteristics of reproducing equipment for digital audio compact discs
|
BS EN 61280-1-4-2003
| 光纤通信子系统基本试验程序.一般通信子系统的试验程序.多模纤维激光发射机用二维近场数据的采集和整理
| Fibre optic communication subsystem basic test procedures - Test procedures for general communication subsystems - Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters
|
BS EN 61751-1998
| 激光电信模块.可靠性评定
| Laser modules used for telecommunication - Reliability assessment
|
BS EN 62107-2002
| 高级激光视盘.光盘互换系统.规范
| Super video compact disc - Disc-interchange system-specification
|
BS EN 62148-11-2004
| 纤维光学有源元件及器件.包装和接口标准.14针调制器集成激光二极管发射机
| Fibre optic active components and devices - Package and interface standards - 14-pin modulator-integrated laser diode transmitters
|
BS EN 62148-12-2004
| 纤维光学有源元件和器件.包装和接口标准.带同轴RF连接器的激光发射机
| Fibre optic active components and devices - Package and interface standards - Laser transmitters with coaxial RF connector
|
BS EN 62149-3-2004
| 纤维光学有源元件和器件.性能标准.2.5Gbit/s调制器-集成激光二极管发射机
| Fibre optic active components and devices - Performance standards - 2,5 Gbit/s modulator-integrated laser diode transmitters
|
BS EN 821-2-1997
| 高技术陶瓷.整体陶瓷.热物理特性. 激光闪烁法(或热脉冲法)对热扩散率的测定
| Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of thermal diffusivity by the laser flash (or heat pulse) method
|
BS EN ISO 11146-1-2005
| 激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.无象散和简单象散束
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Stigmatic and simple astigmatic beams
|
BS EN ISO 11146-2-2005
| 激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.一般象散束
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - General astigmatic beams
|
BS EN ISO 11149-1997
| 光学和光学仪器.激光和激光相关装置.非远程通信激光用的光纤连接器
| Optics and optical instruments - Lasers and laser related equipment - Fibre optic connectors for non-telecommunication laser applications
|
BS EN ISO 11151-1-2000
| 激光和激光相关设备.标准光学元件.紫外线、可见光和近红外光谱范围内的元件
| Lasers and laser-related equipment - Standard optical components - Components for the UV, visible and near-infrared spectral ranges
|
BS EN ISO 11151-2-2000
| 激光和激光相关设备.标准光学元件.红外光谱范围内的元件
| Lasers and laser-related equipment - Standard optical components - Components for the infrared spectral range
|
BS EN ISO 11252-2004
| 激光和激光相关设备.激光装置.文献工作的最低要求
| Lasers and laser-related equipment - Laser device - Minimum requirements for documentation
|
BS EN ISO 11254-1-2000
| 激光和激光相关设备.光表面激光导致损伤阈的测定.1-on-1试验
| Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - 1-on-1 test
|
BS EN ISO 11254-2-2001
| 激光和激光相关设备.光表面激光导至损伤阈值的测定.S-on-1试验
| Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - S-on-1 test
|
BS EN ISO 11551-2004
| 光学和光学仪器.激光和激光设备
| Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
|
BS EN ISO 11553-1-2005
| 机械安全.激光加工机械.一般安全要求
| Safety of machinery - Laser processing machines - General safety requirements
|
BS EN ISO 11670-2003
| 激光器和激光相关设备.激光束参数的试验方法.束定位稳定性
| Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability
|
BS EN ISO 11810-1-2005
| 激光和激光相关设备.手术布单和/或病人保护覆盖物耐激光性的试验方法和分类.基本点燃和穿透性
| Lasers and laser-related equipment - Test method and classification for laser resistance of surgical drapes and/or patient protective covers - Primary ignition and penetration
|
BS EN ISO 11990-2003
| 光学和光学仪器.激光器和相关的激光设备.气管柄抗激光性的测定
| Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts
|
BS EN ISO 12005-2003
| 激光器和激光相关设备.激光束参数的试验方法.偏振
| Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization
|
BS EN ISO 13694-2001
| 光学和光学仪器.激光和激光设备.激光束能量密度分布的试验方法
| Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution
|
BS EN ISO 13695-2004
| 光学和光子学.激光和相关设备.激光的光谱特性的试验方法
| Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers
|
BS EN ISO 13919-1-1997
| 焊接.电子和激光束焊接接头.缺陷的质量级别导则.钢
| Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Steel
|
BS EN ISO 13919-2-2001
| 焊接.电子和激光束焊接接头.缺陷的质量分级指南.铝及其可焊合金
| Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Aluminium and its weldable alloys
|
BS EN ISO 15367-1-2003
| 激光和激光相关设备.测定激光束波阵面形状的试验方法.术语及基础领域
| Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Terminology and fundamental aspects
|
BS EN ISO 15609-4-2004
| 金属材料焊接程序的规范和合格鉴定.焊接程序规范.激光束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Laser beam welding
|
BS EN ISO 15614-11-2002
| 金属材料焊接程序的规范和合格鉴定.焊接程序试验.电子和激光束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Electron and laser beam welding
|
BS EN ISO 15616-1-2003
| 高质量焊接和切割用CO2激光束机的验收试验.通用原则和验收条件
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - General principles, acceptance conditions
|
BS EN ISO 15616-2-2003
| 高质量焊接和切割用CO2激光束机的验收试验.静态和动态精确度的测定
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Measurement of static and dynamic accuracy
|
BS EN ISO 15616-3-2003
| 高质量焊接和切割用CO2激光束机的验收试验.气体流量和压力测量仪的校正
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure
|
BS EN ISO 17526-2003
| 光学和光学仪器.激光器和激光相关设备.激光器的使用寿命
| Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers
|
BS EN ISO 22827-1-2006
| Nd:YAG激光束焊接机器的验收试验.带光纤送的机器.激光装配
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Laser assembly
|
BS EN ISO 22827-2-2006
| Nd:YAG激光束焊接机器的验收试验.带光纤传送的机器.移动机理
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Moving mechanism
|
BS IEC 60825-8-2000
| 激光产品的安全.医疗激光设备安全使用指南
| Safety of laser products - Guidelines for the safe use of medical laser equipment
|
BS ISO 10110-13-1998
| 光学和光学仪器.光学元件和系统图纸的制备.第13部分:激光辐射损坏阈值
| Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold
|
BS ISO 10110-17-2004
| 光学和光学仪器.光学元件和系统制图准备.激光辐射损害阈
| Optics and optical instruments - Preparation of drawings for optical elements and systems - Laser irradiation damage threshold
|
BS ISO 13320-1-2000
| 粒度分析.激光衍射方法.一般规则
| Particle size analysis - Laser diffraction methods - General principles
|
BS ISO 14408-1998
| 激光外科用气管管子的设计.标记和附加信息要求
| Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
|
BS ISO 16063-11-2001
| 振动和冲击传感器的校准方法.采用激光干涉量度法的主要振动校准
| Methods for the calibration of vibration and shock transducers - Primary vibration calibration by laser interferometry
|
BS ISO 16063-13-2002
| 振动和冲击传感器的校准方法.采用激光干涉测量法的主要冲击校准
| Methods for the calibration of vibration and shock transducers - Primary shock calibration using laser interferometry
|
BS ISO 22826-2006
| 金属材料焊缝的破坏性试验.激光和电子束焊测定窄接头硬度的试验(维氏和努氏硬度试验)
| Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
|
BS ISO TR 11552-1998
| 激光和与激光相关的设备.激光材料-加工机械.金属切削的性能规范和基准点
| Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals
|
BS ISO TR 11991-1997
| 上导气管激光外科手术时导气管的管理指南
| Guidance on airway management during laser surgery of upper airway
|
BS QC 720102-1997
| 光纤系统和子系统用带引线的激光二极管模数的空白详细规范
| Blank detail specification for laser diode modules with pigtail for fibre optic systems and subsystems
|
编号 | 中文名称 | 英文名称 |