| 编号 | 中文名称 | 英文名称 |
|---|
| IEC 60601-2-22-1995
| 医用电气设备 第2-22部分:诊断和治疗用激光设备安全的特殊要求
| Medical electrical equipment - Part 2: Particular requirements for the safety of diagnostic and therapeutic laser equipment
|
| IEC 60747-5-4-2006
| 半导体器件.分立器件.第5-4部分:光电器件.半导体激光器
| Semiconductor devices - Discrete devices - Part 5-4: Optoelectronic devices - Semiconductor lasers
|
| IEC 60825-1 AMD 1-1997
| 激光产品的安全 第1部分:设备分类、要求和用户指南 修改1
| Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 1
|
| IEC 60825-1 AMD 2 Corrigendum 1-2002
| 激光产品的安全.第1部分:设备分类、要求和用户指南.修改件2
| Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 2
|
| IEC 60825-1 AMD 2-2001
| 激光产品的安全 第1部分:设备分类、要求和用户指南 修改2
| Safety of laser products - Part 1: Equipment classification, requirements and user's guide; Amendment 2
|
| IEC 60825-1 Edition 1.2-2001
| 激光产品的安全.第1部分:设备分类、要求和用户指南
| Safety of laser products - Part 1: Equipment classification, requirements and user's guide
|
| IEC 60825-1-1993
| 激光产品的安全 第1部分:设备分类、要求和用户指南
| Safety of laser products; part 1: equipment classification, requirements and user's guide
|
| IEC 60825-12-2005
| 激光产品的安全.第12部分:用于信息传输的自由空间光通信系统的安全
| Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
|
| IEC 60825-2-2005
| 激光产品的安全.第2部分:光纤通信系统的安全(OFCS)
| Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
|
| IEC 60825-4-2006
| 激光产品的安全.第4部分:激光防护器
| Safety of laser products - Part 4: Laser guards
|
| IEC 60856 AMD 1-1991
| 预录光学反射视盘系统 “激光视盘” 50Hz/625行 PAL制 修改1
| Pre-recorded optical reflective videodisk system; "laser vision" 50 Hz/625 lines; PAL; amendment 1
|
| IEC 60856 AMD 2-1997
| 预录光学反射视盘系统 “激光视盘” 50Hz/625行 PAL制 修改2
| Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines - PAL; Amendment 2
|
| IEC 60856-1986
| 预录光学反射视盘系统 “激光视盘” 50Hz/625行 PAL制
| Pre-recorded optical reflective videodisk system. "Laser vision" 50 Hz/625 lines - PAL
|
| IEC 60857 AMD 1-1991
| 预录光学反射视盘系统 “激光视盘” 60Hz/525行 M/NTSC制 修改1
| Pre-recorded optical reflective videodisk system; "laser vision" 60 Hz/525 lines; M/NTSC; amendment 1
|
| IEC 60857 AMD 2-1997
| 预录光学反射视盘系统 “激光视盘” 60Hz/525行 M/NTSC制 修改2
| Pre-recorded optical reflective videodisk system - "Laser vision" 60 Hz/525 lines - M/NTSC; Amendment 2
|
| IEC 60857-1986
| 预录光学反射视盘系统 “激光视盘” 60Hz/525行 M/NTSC制
| Pre-recorded optical reflective videodisk system. "Laser vision" 60 Hz/525 lines - M/NTSC
|
| IEC 61040-1990
| 激光辐射用功率和能量测量探测器、仪器和设备
| Power and energy measuring detectors, instruments and equipment for laser radiation
|
| IEC 61096 AMD 1-1996
| 数字音频激光唱盘重放设备特性的测量方法 修改1
| Methods of measuring the characteristics of reproducing equipment for digital audio compact discs; Amendment 1
|
| IEC 61096-1992
| 数字音频激光唱盘重放设备特性的测量方法
| Methods of measuring the characteristics of reproducing equipment for digital audio compact discs
|
| IEC 61280-1-4-2003
| 纤维光学通信子系统试验程序.第1-4部分:一般通信子系统.多模纤维激光发射机用二维近场数据的采集和换算
| Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters
|
| IEC 61280-2-10-2005
| 纤维光学通信子系统试验程序.第2-10部分:数字系统.激光发射器的时间分辨线性调频脉冲和α指数测量
| Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters
|
| IEC 61751-1998
| 通信用激光模块 可靠性评定
| Laser modules used for telecommunication - Reliability assessment
|
| IEC 62107-2000
| 高级激光视盘 光盘交换系统 规范
| Super Video Compact Disc - Disc-interchange system-specification
|
| IEC 62148-11-2003
| 光纤有源元件及器件.包装和接口标准.第11部分:14针调制器集成激光二极管发射机
| Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters
|
| IEC 62148-12-2004
| 纤维光学有源元件和器件.包装和接口标准.第12部分:带同轴RF连接器的激光传输器
| Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector
|
| IEC 62149-3-2004
| 纤维光学有源元件和器件.性能标准.第3部分:2.5Gbit/s调制器-集成激光二极管发射机
| Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters
|
| IEC/TR 60825-10-2002
| 激光制品的安全性.第10部分:IEC 60825-1的应用导则和注释
| Safety of laser products - Part 10: Application guidelines and explanatory notes to IEC 60825-1
|
| IEC/TR 60825-13-2006
| 激光产品的安全.第13部分:激光产品分类测量
| Safety of laser products - Part 13: Measurements for classification of laser products
|
| IEC/TR 60825-14-2004
| 激光产品安全.第14部分:使用者指南
| Safety of laser products - Part 14: A user's guide
|
| IEC/TR 60825-5-2005
| 激光产品安全性.第5部分:IEC 60825-1的制造商检查清单
| Safety of laser products - Part 5: Manufacturer's checklist for IEC 60825-1
|
| IEC/TR 60825-8-1999
| 激光产品的安全 第8部分:医疗激光设备安全使用指南
| Safety of laser products - Part 8: Guidelines for the safe use of medical laser equipment
|
| IEC/TR 60825-9-1999
| 激光产品的安全 第9部分:非相干光辐射最大允许曝光量的汇集
| Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation
|
| IEC/TR3 60825-3-1995
| 激光产品的安全 第3部分:激光显示器和指示器指南
| Safety of laser products - Part 3: Guidance for laser displays and shows
|
| ISO 10110-17-2004
| 光学和光学仪器.光学元件和系统制图准备.第17部分:激光辐射损害阈
| Optics and photonics - Preparation of drawings for optical elements and systems - Part 17: Laser irradiation damage threshold
|
| ISO 11145-2006
| 光学和光子学.激光和激光设备.词汇和符号
| Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols
|
| ISO 11146-1-2005
| 激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.第1部分:无象散和简单象散束
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams
|
| ISO 11146-2-2005
| 激光和激光相关设备.激光束宽度、发散角和束扩散率的试验方法.第2部分:一般像散束
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams
|
| ISO 11151-1-2000
| 激光和激光设备 标准光学元件 第1部分:紫外线、可见和近红外光谱范围用元件
| Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
|
| ISO 11151-2-2000
| 激光和激光设备 标准光学元件 第2部分:红外光谱范围用元件
| Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
|
| ISO 11252-2004
| 激光和激光设备.激光装置.对文件的最低要求
| Lasers and laser-related equipment - Laser device - Minimum requirements for documentation
|
| ISO 11254-1-2000
| 激光和激光设备 光学表面激光导致损伤阈值的测定 第1部分:1-on-1试验
| Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 1: 1-on-1 test
|
| ISO 11254-2-2001
| 激光器和激光相关设备 激光导致光学表面损伤阈值的确定 第2部分：S-on-1 试验
| Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test
|
| ISO 11551-2003
| 光学和光学仪器.激光和激光设备.光学激光组件光吸收性试验方法
| Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components
|
| ISO 11553-1-2005
| 机械安全.激光加工机械.第1部分:一般安全要求
| Safety of machinery - Laser processing machines - Part 1: General safety requirements
|
| ISO 11554-2006
| 光学和光子学.激光和激光设备.激光束功率、能量和时间特征的试验方法
| Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics
|
| ISO 11670 Technical Corrigendum 1-2004
| 激光和激光相关设备.激光束参数的试验方法.束位置稳定性.技术勘误1
| Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability; Technical Corrigendum 1
|
| ISO 11670-2003
| 激光和激光设备.激光束参数的试验方法.束定位稳定性
| Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability
|
| ISO 11810-1-2005
| 激光和激光相关设备.手术布单和/或病人保护覆盖物耐激光性的试验方法和分类.第1部分:基本点燃和穿透性
| Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration
|
| ISO 11990-2003
| 光学和光学仪器.激光和激光设备.气管柄激光抗性的测定
| Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts
|
| ISO 12005-2003
| 激光和激光设备.激光束参数的试验方法.偏振
| Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization
|
| ISO 13320-1-1999
| 粒度分析 激光衍射法 第1部分:一般原则
| Particle size analysis - Laser diffraction methods - Part 1: General principles
|
| ISO 13694 Technical Corrigendum 1-2005
| 光学和光学仪器.激光和激光设备.激光束能量密度分布的试验方法.技术勘误1
| Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power (energy) density distribution; Technical Corrigendum 1
|
| ISO 13694-2000
| 光学和光学仪器 激光和激光设备 激光束能量密度分布的试验方法
| Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power [energy] density distribution
|
| ISO 13695-2004
| 光学和光子学.激光及其相关设备.激光光谱特性的试验方法
| Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers
|
| ISO 13697-2006
| 光学和光子学.激光和激光相关的设备.光学激光元件的镜面反射率和正透视度的试验方法
| Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
|
| ISO 13919-1-1996
| 焊接 电子束和激光焊接头 缺陷的质量分级指南 第1部分:钢
| Welding - Electron and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel
|
| ISO 13919-2-2001
| 焊接 电子束和激光束焊接接头 缺陷质量等级指南 第2部分：铝及其可焊合金
| Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys
|
| ISO 14408-2005
| 激光手术用气管掐管.标识及附带信息要求
| Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information
|
| ISO 15367-1-2003
| 激光及激光相关设备.激光束波前形状测定用试验方法.第1部分:术语和基础领域
| Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 1: Terminology and fundamental aspects
|
| ISO 15367-2-2005
| 激光及激光相关设备.激光束波前形状测定用试验方法.第2部分:Shack-Hartmann传感器
| Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Part 2: Shack-Hartmann sensors
|
| ISO 15609-4-2004
| 金属材料的焊接程序规范和鉴定.焊接程序规范.第4部分:激光束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding
|
| ISO 15614-11-2002
| 金属材料焊接程序的规范和鉴定.焊接程序试验.第11部分:电子和激光束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding
|
| ISO 15616-1-2003
| 高质量焊接和切割用CO2激光射线机的验收试验.第1部分:通用原理和验收条件
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions
|
| ISO 15616-2-2003
| 高质量焊接和切割用CO2激光射线机的验收试验.第2部分:静态和动态准确度的测定
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy
|
| ISO 15616-3-2003
| 高质量焊接和切割用CO2激光射线机的验收试验.第3部分:气体流量和压力测量仪的校正
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure
|
| ISO 16063-11-1999
| 振动与冲击传感器的校准方法 第11部分:激光干涉法作主要的振动校准
| Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry
|
| ISO 16063-13-2001
| 振动和冲击传感器的校准方法 第13部分：用激光干涉法的基本校准
| Methods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration using laser interferometry
|
| ISO 17123-6-2003
| 光学和光学仪器.大地测量和测绘仪器的现场试验规程.第6部分:旋转激光器
| Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 6: Rotating lasers
|
| ISO 17526-2003
| 光学和光学仪器.激光器和激光相关设备.激光器的使用寿命
| Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers
|
| ISO 17658-2002
| 焊接.氧气火焰切割、激光束切割和等离子体切割的缺陷
| Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
|
| ISO 18755-2005
| 细陶瓷(高级陶瓷、高级工业陶瓷).用激光闪光法测定块体陶瓷的热扩散
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thermal diffusivity of monolithic ceramics by laser flash method
|
| ISO 22826-2005
| 金属材料焊缝的破坏性试验.激光和电子束焊接窄接头的硬度试验(维氏和努氏硬度试验)
| Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
|
| ISO 22827-1-2005
| Nd:YAG激光射线焊接机器的加速试验.带光纤传送的机器.第1部分:激光装配
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 1: Laser assembly
|
| ISO 22827-2-2005
| Nd:YAG激光射线焊接机器的加速试验.带光纤传送的机器.第2部分:移动装置
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Part 2: Moving mechanism
|
| ISO 2971-1998
| 卷烟和过滤嘴 公称直径的测定 使用激光束测量仪的方法
| Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus
|
| ISO 6161-1981
| 个人用护目镜 防激光辐射的滤光镜和护目镜
| Personal eye-protectors; Filters and eye-protectors against laser radiation
|
| ISO 8130-13-2001
| 粉末涂料 第13部分：采用激光衍射的粒度分析
| Coating powders - Part 13: Particle size analysis by laser diffraction
|
| ISO/TR 11146-3 Technical Corrigendum 1-2005
| 激光和激光相关设备.激光束宽度、发散角度和束扩散率的试验方法.第3部分:本征的和几何的激光束分类、扩散和
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods; Technical Corrigendum 1
|
| ISO/TR 11146-3-2004
| 激光和激光相关设备.激光束宽度、发散角度和束扩散率.第3部分:内在和几何激光束分类、扩散和试验方法细节
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods
|
| ISO/TR 11552-1997
| 激光和激光设备 激光材料处理机械 性能规范和金属材料切削基准
| Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals
|
| ISO/TR 11991-1995
| 上呼吸道激光手术中通气管理指南
| Guidance on airway management during laser surgery of upper airway
|
| ISO/TR 17671-6-2005
| 焊接.金属材料焊接建议.第6部分:激光束焊接
| Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding
|
| ISO/TR 22588-2005
| 光学和光子学.激光和激光相关设备.激光光学元件感应吸收效应的测量和评估
| Optics and photonics - Lasers and laser-related equipment - Measurement and evaluation of absorption-induced effects in laser optical components
|
| ISO/TS 17477-2003
| 使用2维移动光学型激光器的焊接和切割用CO2激光束机器的验收试验
| Acceptance tests for CO<(Index)2>-laser beam machines for welding and cutting using 2D moving optics type
|
| 编号 | 中文名称 | 英文名称 |
|---|