| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| CISPR 12 AMD 1-2009 | 车辆、船只和内燃机.无线电干扰特性.外接接收器保护用测量方法和限值.修改件1 | Vehicles, boats and internal combustion engines – Radio disturbancecharacteristics – Limits and methods of measurement for the protection of offboardreceiversAMENDMENT 1 |
| CISPR 15-2009 | 电气照明和类似设备的无线电干扰特性用测量方法和限值 | Limits and methods of measurement of radio disturbance characteristics ofelectrical lighting and similar equipment |
| CISPR 16-2-1 Edition 1.2-2008 | 无线电干扰和抗扰性测量装置及方法用规范.第2-1部分:干扰性和抗扰性测量方法.传导干扰测量 | pecification for radio disturbance and immunity measuring apparatus andmethods –Part 2-1: Methods of measurement of disturbances and immunity – Conducteddisturbance measurements |
| CISPR 16-4-1/TR-2005 | 无线电骚扰和抗扰度测量设备和测量方法规范 第4-1部分:不确定度、统计学和限值建模标准化的EMC试验不确定 | Specification for radio disturbance and immunity measuring apparatus and methods--Part4-1:Uncertainties,statistics and limit modelling -Uncertainties in standardized EMC tests |
| CISPR 16-4-3/TR-2004 | 无线电骚扰和抗扰度测量设备和测量方法规范 第4-3部分:不确定度、统计学和限值建模批量产品的EMC符合性确 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3:Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products |
| CISPR 22-2008 | 信息技术设备.无线电干扰特性.限值和测量方法 | Information technology equipment – Radio disturbance characteristics –Limits and methods of measurement |
| CISPR 25 Corrigendum 1-2009 | 车辆、船只和内燃机.无线电干扰特性.车载/船载接收器保护用测量方法和限值.技术勘误1 | Vehicles, boats and internal combustion engines – Radio disturbance characteristics –Limits and methods of measurement for the protection of on-board receiversCorrigendum 1 |
| IEC 60094-3 AMD 2-1988 | 磁带录音和重放系统 第3部分:磁带录音和放音设备特性的测量方法 修改2 | Magnetic tape sound recording and reproducing systems. Part 3: Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape |
| IEC 60094-3 AMD 3-1996 | 磁带录音和重放系统 第3部分:磁带录音和放音设备特性的测量方法 修改3 | Magnetic tape sound recording and reproducing systems - Part 3: Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape; Amendment 3 |
| IEC 60094-3-1979 | 磁带录音和重放系统 第3部分:磁带录音和放音设备特性的测量方法 | Magnetic tape sound recording and reproducing systems. Part 3 : Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape |
| IEC 60100 AMD 1-1969 | 电子管极间电容的测量方法 修改1 | Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves |
| IEC 60100-1962 | 电子管极间电容的测量方法 | Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves |
| IEC 60107-1-1997 | 电视广播传输接收机的测量方法 第1部分:一般要求 广播和电视频率显示的测量 | Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements on displays at radio and video frequencies |
| IEC 60107-2-1997 | 电视广播传输接收机的测量方法 第2部分:音频通道 一般方法与单声道方法 | Methods of measurement on receivers for television broadcast transmissions - Part 2: Audio channels - General methods and methods for monophonic channels |
| IEC 60107-3 AMD 1-1999 | 电视广播传输接收机的推荐测量方法 第3部分:用副载系统多声道电视接收机的电气测量 修改1 | Recommended methods of measurement on receivers for television broadcast transmissions - Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems; Amendment 1 |
| IEC 60107-3-1988 | 电视广播传输接收机的推荐测量方法 第3部分:用副载系统多声道电视接收机的电气测量 | Recommended methods of measurement on receivers for television broadcast transmissions; part 3: electrical measurements on multichannel sound television receivers using subcarrier systems |
| IEC 60107-4 AMD 1-1999 | 电视广播传输接收机的推荐测量方法 第4部分:双载波调频系统多声道电视接收机的电气测量 修改1 | Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system; Amendment 1 |
| IEC 60107-4 Edition 1.1-1999 | 电视广播接收机的推荐测量方法.第4部分:使用双载波调频系统多声道电视接收机的电气性能测量 | Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system |
| IEC 60107-4-1988 | 电视广播传输接收机的推荐测量方法 第4部分:双载波调频系统多声道电视接收机的电气测量 | Recommended methods of measurement on receivers for television broadcast transmissions; part 4: electrical measurements on multichannel sound television receivers using the two-carrier FM-system |
| IEC 60107-5 AMD 1-1999 | 电视广播传输接收机的推荐测量方法 第5部分:使用NICAM双声道数字音频系统对多声道电视接收机的电气测量 修 | Recommended methods of measurement on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system; Amendment 1 |
| IEC 60107-5 Edition 1.1-1999 | 电视广播接收机的推荐测量方法.第5部分:使用NICAM双声道数字音频系统多声道电视接收机的电气性能测量 | Recommended methods of measurements on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system |
| IEC 60107-5-1992 | 电视广播传输接收机的推荐测量方法 第5部分:使用NICAM双声道数字音频系统对多声道电视接收机的电气测量 | Recommended methods of measurement on receivers for television broadcast transmissions; part 5: electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system |
| IEC 60107-6-1989 | 电视广播传输接收机的推荐测量方法 第6部分:非广播信号标准条件下的测量 | Recommended methods of measurement on receivers for television broadcast transmissions; part 6: measurement under conditions different from broadcast signal standards |
| IEC 60107-7-1997 | 电视广播传输接收机的推荐测量方法 第7部分:HDTV显示器 | Methods of measurement on receivers for television - Part 7: HDTV displays |
| IEC 60118-9-1985 | 助听器 第9部分:带有骨振输出的助听器性能测量方法 | Hearing aids. Part 9 : Methods of measurement of characteristics of hearing aids with bone vibrator output |
| IEC 60151-0-1966 | 电子管电性能的测量 第0部分:电子管测量方法的有关注意事项 | Precautions relating to methods of measurement of electronic tubes and valves |
| IEC 60151-10-1966 | 电子管电性能的测量 第10部分:音频输出功率和失真的测量方法 | Measurements of the electrical properties of electronic tubes. Part 10 : Methods of measurement of audio-frequency output power and distortion |
| IEC 60151-11-1966 | 电子管电性能的测量 第11部分:射频输出功率的测量方法 | Measurements of the electrical properties of electronic tubes. Part 11 : Methods of measurement of radiofrequency output power |
| IEC 60151-12-1966 | 电子管电性能的测量 第12部分:电极电阻、跨导、放大系数、变频电阻和变频跨导的测量方法 | Measurements of the electrical properties of electronic tubes. Part 12 : Methods of measuring electrode resistance, transconductance,amplification factor, conversion resistance and conversion transconductance |
| IEC 60151-13-1966 | 电子管电性能的测量 第13部分:高真空电子管热阴极发射电流的测量方法 | Measurements of the electrical properties of electronic tubes. Part 13 : Methods of measurement of emission current from hot cathodes for high-vacuum electronic tubes and valves |
| IEC 60151-14-1975 | 电子管电性能的测量 第14部分:雷达和示波阴极射线管的测量方法 | Measurements of the electrical properties of electronic tubes. Part 14 : Methods of measurement of radar and oscilloscope cathode-ray tubes |
| IEC 60151-15-1967 | 电子管电性能的测量 第15部分:寄生和不需要的电极电流的测量方法 | Measurements of the electrical properties of electronic tubes. Part 15 : Methods of measurement of spurious and unwanted electrode currents |
| IEC 60151-16-1968 | 电子管电性能的测量 第16部分:电视显像管的测量方法 | Measurements of the electrical properties of electronic tubes. Part 16 : Methods of measurement for television picture tubes |
| IEC 60151-17-1969 | 电子管电性能的测量 第17部分:充气管的测量方法 | Measurements of the electrical properties of electronic tubes. Part 17 : Methods of measurement of gas filled tubes and valves |
| IEC 60151-18-1968 | 电子管电性能的测量 第18部分:由机械或声音激励引起的噪声的测量方法 | Measurements of the electrical properties of electronic tubes. Part 18 : Methods of measurement of noises due to mechanical or acoustic excitations |
| IEC 60151-19-1969 | 电子管电性能的测量 第19部分:电晕稳压管的测量方法 | Measurements of the electrical properties of electronic tubes. Part 19 : Methods of measurement on corona stabilizers |
| IEC 60151-20-1969 | 电子管电性能的测量 第20部分:闸流管脉冲调制器的测量方法 | Measurements of the electrical properties of electronic tubes. Part 20 : Methods of measurement of thyratron pulse modulators |
| IEC 60151-21-1969 | 电子管电性能的测量 第21部分:电子管交叉调制的测量方法 | Measurements of the electrical properties of electronic tubes. Part 21 : Methods of measurement of cross-modulation in electronic tubes and valves |
| IEC 60151-22-1970 | 电子管电性能的测量 第22部分:冷阴极计数管和指示管的测量方法 | Measurements of the electrical properties of electronic tubes. Part 22 : Methods of measurement for cold cathode counting and indicator tubes |
| IEC 60151-23-1970 | 电子管电性能的测量 第23部分:真空脉冲调制管的测量方法 | Measurements of the electrical properties of electronic tubes. Part 23 : Methods of measurement of vacuum pulse modulator tubes and valves |
| IEC 60151-24-1971 | 电子管电性能的测量 第24部分:阴极射线电荷存储管的测量方法 | Measurements of the electrical properties of electronic tubes. Part 24 : Methods of measurement of cathode-ray charge-storage tubes |
| IEC 60151-25-1971 | 电子管电性能的测量 第25部分:盖格-弥勒计数管的测量方法 | Measurements of the electrical properties of electronic tubes. Part 25 : Methods of measurement of Geiger-Müller counter tubs |
| IEC 60151-26-1971 | 电子管电性能的测量 第26部分:摄像管的测量方法 | Measurements of the electrical properties of electronic tubes. Part 26 : Methods of measurement for camera tubes |
| IEC 60151-27-1974 | 电子管电性能的测量 第27部分:发射管互调分量的测量方法 | Measurements of the electrical properties of electronic tubes. Part 27 : Methods of measurement for intermodulation products in transmitting tubes |
| IEC 60151-28-1978 | 电子管电性能的测量 第28部分:彩色电视显像管的测量方法 | Measurements of the electrical properties of electronic tubes. Part 28 : Methods of measurement of colour television picture tubes |
| IEC 60151-4-1963 | 电子管电性能的测量 第4部分:噪声系数的测量方法 | Measurements of the electrical properties of electronic tubes. Part 4 : Methods of measuring noise factor |
| IEC 60151-5-1964 | 电子管电性能的测量 第5部分:嘘声和哼声的测量方法 | Measurements of the electrical properties of electronic tubes. Part 5 : Methods of measuring hiss and hum |
| IEC 60151-9-1966 | 电子管电性能的测量 第9部分:阴极中间层阻抗的测量方法 | Measurements of the electrical properties of electronic tubes. Part 9 : Methods of measuring the cathode-interface impedance |
| IEC 60153-1-1964 | 空心金属波导 第1部分:一般要求和测量方法 | Hollow metallic waveguides. Part 1 : General requirements and measuring methods |
| IEC 60169-1 AMD 1-1996 | 射频连接器 第1部分:一般要求和测量方法 修改1 | Radio-frequency connectors - Part 1: General requirements and measuring methods; Amendment 1 |
| IEC 60169-1-1-1987 | 射频连接器 第1部分:一般要求和测量方法 第1节:电气试验和测量方法:反射系数 | Radio-frequency connectors. Part 1 : General requirements and measuring methods. Section One: Electrical tests and measuring procedures: Reflection factor |
| IEC 60169-1-1987 | 射频连接器 第1部分:一般要求和测量方法 | Radio-frequency connectors. Part 1 : General requirements and measuring methods |
| IEC 60169-1-3 AMD 1-1996 | 射频连接器 第1部分:一般要求和测量方法 第3节:电气试验和测量程序:屏蔽效率 修改1 | Radio-frequency connectors - Part 1: General requirements and measuring methods - Section 3: Electrical tests and measuring procedures: Screening effectiveness; Amendment 1 |
| IEC 60169-1-3-1988 | 射频连接器 第1部分:一般要求和测量方法 第3节:电气试验和测量方法:屏蔽效率 | Radio-frequency connectors. Part 1: General requirements and measuring methods. Section Three - Electrical tests and measuring procedures : Screening effectiveness |
| IEC 60189-1-2007 | 聚氯乙烯(PVC)绝缘材料和聚氯乙烯(PVC)护套的低频电缆和电线.第1部分:一般试验和测量方法 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
| IEC 60191-6-19-2010 | 半导体器件的机械标准化.第6-19部分:在高温及最大允许翘曲下构装翘曲的测量方法 | Mechanical standardization of semiconductor devices - Part 6-19: Measurement methods of package warpage at elevated temperature and the maximum permissible warpage |
| IEC 60191-6-3-2000 | 半导体器件的机械标准化 第6-3部分:绘制表面安装半导体器件封装外形图的一般规则 四面扁平封装尺寸的测量方 | Mechanical standardization of semiconductor devices - Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Measuring methods for package dimensions of quad flat packs (QFP) |
| IEC 60191-6-4-2003 | 半导体器件的机械标准化.第6-4部分:绘制表面安装半导体器件封装外形图的一般规则.焊球网格陈列封装尺寸的测 | Mechanical standardization of semiconductor devices - Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Measuring methods for package dimensions of ball grid array (BGA) |
| IEC 60195-1965 | 固定电阻器产生电流噪声测量方法 | Method of measurement of current noise generated in fixed resistors |
| IEC 60235-2A-1974 | 微波管电性能的测量 第2部分:一般测量 补充1:第4章:寄生噪声的测量方法 | Measurement of the electrical properties of microwave tubes. Part 2 : General measurements. First supplement: Chapter V: Methods of measuring parasitic noise |
| IEC 60244-1-1999 | 无线电发射机的测量方法 第1部分:广播发射机的一般特性 | Methods of measurement for radio transmitters - Part 1: General characteristics for broadcast transmitters |
| IEC 60244-10-1986 | 无线电发射机的测量方法 第10部分:采用插入测试信号的电视发射机和差转机的测量方法 | Methods of measurement for radio transmitters. Part 10 : Methods of measurement for television transmitters and transposers employing insertion test signals |
| IEC 60244-11-1989 | 无线电发射机的测量方法 第11部分:调频声音广播差转机 | Methods of measurement for radio transmitters; part 11: transposers for FM sound broadcasting |
| IEC 60244-12-1-1989 | 无线电发射机的测量方法 第12部分:声音及电视广播发射机及差转机的散页说明书编写指南 应规定的特性 | Methods of measurement for radio transmitters; part 12: guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting; characteristics to be specified |
| IEC 60244-12-2-1989 | 无线电发射机的测量方法 第12部分:声音及电视广播发射机及差转机的散页说明书编写指南 单篇规范 | Methods of measurement for radio transmitters; part 12: guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting; specification sheets |
| IEC 60244-13-1991 | 无线电发射机的测量方法 第13部分:调频声音广播的性能特性 | Methods of measurement for radio transmitters; part 13: performance characteristics for FM sound broadcasting |
| IEC 60244-14-1997 | 无线电发射机的测量方法 第14部分:由两个或多个使用相同或相近天线的发射机造成的外部互调产物 | Methods of measurement for radio transmitters - Part 14: External intermodulation products caused by two or more transmitters using the same or adjacent antennas |
| IEC 60244-15-1999 | 无线电发射机的测量方法 第15部分:声音广播用调幅发射机 | Methods of measurement for radio transmitters - Part 15: Amplitude-modulated transmitters for sound broadcasting |
| IEC 60244-2 AMD 1-1974 | 无线电发射机的测量方法 第2部分:带宽、带外功率和非本振功率 修改1 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations |
| IEC 60244-2-1969 | 无线电发射机的测量方法 第2部分:带宽、带外功率和非本振功率 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations |
| IEC 60244-2A AMD 1-1973 | 无线电发射机的测量方法 第2部分:带宽、带外功率和非本振功率 补充1:附录 修改1 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. First supplement: Appendices |
| IEC 60244-2A-1969 | 无线电发射机的测量方法 第2部分:带宽、带外功率和非本振功率 补充1:附录 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. First supplement: Appendices |
| IEC 60244-2B-1969 | 无线电发射机的测量方法 第2部分:带宽、带外功率和非主振功率 补充2:用于电话及声音广播发射机的带宽及带外 | Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. Second supplement: Modulating signals for the measurement of bandwidth and out-of-band power of transmitters for telephony and sound broadcasting |
| IEC 60244-3-1972 | 无线电发射机的测量方法 第3部分:有用调制和无用调制 | Methods of measurement for radio transmitters. Part 3 : Wanted and unwanted modulation |
| IEC 60244-3A-1971 | 无线电发射机的测量方法 第3部分:有用调制和无用调制 补充1:附录 | Methods of measurement for radio transmitters. Part 3 : Wanted and unwanted modulation. First supplement: Appendices |
| IEC 60244-3B-1972 | 无线电发射机的测量方法 第3部分:有用调制和无用调制 补充2:无用调制，包括交流及噪声调制 | Methods of measurement for radio transmitters. Part 3 : Wanted and unwanted modulation. Second supplement: Unwanted modulation, including hum and noise modulation |
| IEC 60244-4-1973 | 无线电发射机的测量方法 第4部分:无线电话和声音广播发射机的幅/频特性及非线性失真 | Methods of measurement for radio transmitters. Part 4 : Amplitude/frequency characteristics and non-linearity distortion in transmitters for radiotelephony and sound broadcasting |
| IEC 60244-4A-1976 | 无线电发射机的测量方法 第4部分:无线电话和声音广播发射机的幅/频特性及非线性失真 补充1:第3节 | Methods of measurement for radio transmitters. Part 4 : Amplitude/frequency characteristics and non-linearity distortion in transmitters for radiotelephony and sound broadcasting. First supplement: Section three |
| IEC 60244-5-1992 | 无线电发射机的测量方法 第5部分:电视发射机的性能特性 | Methods of measurement for radio transmitters; part 5: performance characteristics of television transmitters |
| IEC 60244-6-1976 | 无线电发射机的测量方法 第6部分:在130KHz-1GHz频率范围内的机箱辐射 | Methods of measurement for radio transmitters. Part 6 : Cabinet radiation at frequencies between 130 kHz and 1 GHz |
| IEC 60244-7-1979 | 无线电发射机的测量方法 第7部分:在1GHz以上频率的机箱辐射 | Methods of measurement for radio transmitters. Part 7 : Cabinet radiation at frequencies above 1 GHz |
| IEC 60244-7A-1980 | 无线电发射机的测量方法 第7部分:在1GHz以上频率的机箱辐射 补充1:第4节:中型发射机 第5节:大型发射机 | Methods of measurement for radio transmitters. Part 7 : Cabinet radiation at frequencies above 1 GHz. First supplement: Sections four and five: Medium-sized and large transmitters |
| IEC 60244-8-1993 | 无线电发射机的测量方法 第8部分:用于测量电视发射机和差转机的残留边带解调器的性能特性 | Methods of measurement for radio transmitters; part 8: performance characteristics of vestigal-sideband demodulators used for testing television transmitters and transposers |
| IEC 60244-9-1993 | 无线电发射机的测量方法 第9部分:电视差转机的性能特性 | Methods of measurement for radio transmitters; part 9: performance characteristics for television transposers |
| IEC 60306-2-1969 | 光敏器件的测量 第2部分:光电管的测量方法 | Measurement of photosensitive devices. Part 2 : Methods of measurement of phototubes |
| IEC 60306-3-1970 | 光敏器件的测量 第3部分:用于可见光谱的光电导管的测量方法 | Measurement of photosensitive devices. Part 3 : Methods of measurement of photoconductive cells for use in the visible spectrum |
| IEC 60306-4-1971 | 光敏器件的测量 第4部分:光电倍增管的测量方法 | Measurement of photosensitive devices. Part 4 : Methods of measurement of photo multipliers |
| IEC 60311 AMD 1-2005 | 家用或类似用途的电熨斗性能测量方法.修改件1 | Amendment 1 - Electric irons for household or similar use - Methods for measuring performance |
| IEC 60311 AMD 2-2009 | 家用或类似用途的电熨斗.性能测量方法.修改件2 | Electric irons for household or similar use - Methods for measuring performance; Amendment 2 |
| IEC 60311 Edition 4.1-2006 | 家用和类似用途的电熨斗.性能测量方法 | Electric irons for household or similar use - Methods for measuring performance |
| IEC 60311-2002 | 家用或类似用途的电熨斗.性能测量方法 | Electric irons for household or similar use - Methods for measuring performance |
| IEC 60315-1 Corrigendum 1-1997 | 各种发射类别的无线电接收机的测量方法.第1部分:一般考虑和测量(包括音频测量)方法 | Methods of measurement on radio receivers for various classes of emission; part 1: general considerations and methods of measurement, including audio-frequency measurements |
| IEC 60315-1-1988 | 各种发射类别的无线电接收机的测量方法 第1部分:一般考虑和测量(包括音频测量)方法 | Methods of measurement on radio receivers for various classes of emission; part 1: general considerations and methods of measurement, including audio-frequency measurements |
| IEC 60315-3 AMD 1-1999 | 各种发射类别的无线电接收机的测量方法 第3部分:调幅声音广播发射接收机 修改1 | Methods of measurement on radio receivers for various classes of emission - Part 3: Receivers for amplitude-modulated sound-broadcasting emissions; Amendment 1 |
| IEC 60315-3 Corrigendum 1-1994 | 各种发射类别的无线电接收机的测量方法.第3部分:调幅声音广播发射接收机 | Methods of measurement on radio receivers for various classes of emission; part 3: receivers for amplitude-modulated sound-broadcasting emissions |
| IEC 60315-3 Edition 2.1-1999 | 各种发射类别的无线电接收机的测量方法. 第3部分:放大调制声音播送接收器. | Methods of measurement on radio receivers for various classes of emission - Part 3: Receivers for amplitude-modulated sound-broadcasting emissions |
| IEC 60315-3-1989 | 各种发射类别的无线电接收机的测量方法 第3部分:调幅声音广播发射接收机 | Methods of measurement on radio receivers for various classes of emission; part 3: receivers for amplitude-modulated sound-broadcasting emissions |
| IEC 60315-4-1997 | 各种发射类别的无线电接收机的测量方法 第4部分:调频声音广播发射接收机 | Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions |
| IEC 60315-6 Corrigendum 1-1997 | 各种发射类别的无线电接收机的测量方法.第6部分:一般用途通信接收机 | Methods of measurement on radio receivers for various classes of emission; part 6: general purpose communication receivers |
| IEC 60315-6-1991 | 各种发射类别的无线电接收机的测量方法 第6部分:一般用途通信接收机 | Methods of measurement on radio receivers for various classes of emission; part 6: general purpose communication receivers |
| IEC 60315-9-1996 | 各种发射类别的无线电接收机的测量方法 第9部分:与无线电数据系统接收相关特性的测量 | Methods of measurement on radio receivers for various classes of emission - Part 9: Measurement of the characteristics relevant to radio data system (RDS) reception |
| IEC 60339-1-1971 | 一般用途的刚性同轴传输线及其相关法兰连接器 第1部分:一般要求和测量方法 | General purpose rigid coaxial transmission lines and their associated flange connectors. Part 1 : General requirements and measuring methods |
| IEC 60350 Edition 2.2-2009 | 家用电灶、灶台、烤炉和烤架.性能测量方法 | Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance |
| IEC 60360 Corrigendum 1-1999 | 灯头温升的标准测量方法 | Standard method of measurement of lamp cap temperature rise ;Corrigendum 1 |
| IEC 60360-1998 | 灯头温升的标准测量方法 | Standard method of measurement of lamp cap temperature rise |
| IEC 60379-1987 | 家用电热水器性能测量方法 | Methods for measuring the performance of electrical water-heaters for household purposes |
| IEC 60386 AMD 1-1988 | 录音和重放设备速度波动的测量方法 修改1 | Method of measurement of speed fluctuations in sound recording and reproducing equipment |
| IEC 60386-1972 | 录音和重放设备速度波动的测量方法 | Method of measurement of speed fluctuations in sound recording and reproducing equipment |
| IEC 60404-10-1988 | 磁性材料 第10部分:磁性钢片和钢带在中频下的磁性能的测量方法 | Magnetic materials; part 10: methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies |
| IEC 60404-13-1995 | 磁性材料 第13部分:电工钢片和钢带的密度、电阻率和叠层因数的测量方法 | Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip |
| IEC 60404-14-2002 | 磁性材料.第14部分:用拔出或旋转法对铁磁材料试样的磁偶极矩的测量方法 | Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method |
| IEC 60404-4 AMD 1-2000 | 磁性材料 第4部分:磁性软材料直流磁性能的测量方法 修改1 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetically soft materials; Amendment 1 |
| IEC 60404-4 AMD 2-2008 | 磁性材料.第4部分:软磁材料的直流磁性的测量方法.修改件2 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of magnetially soft materials; Amendment 2 |
| IEC 60404-4-1995 | 磁性材料.第4部分:铁和钢直流磁特性测量方法 | Magnetic materials - Part 4: Methods of measurement of d.c. magnetic properties of iron and steel |
| IEC 60404-5 AMD 1-2007 | 磁性材料.第5部分:永久磁铁(硬磁)材料.磁性能测量方法.修改件1 | Magnetic materials - Part 5: Permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties; Amendment 1 |
| IEC 60404-5-1993 | 磁性材料 第5部分:永磁(硬磁)材料 磁性能的测量方法 | Magnetic materials; part 5: permanent magnet (magnetically hard) materials; methods of measurement of magnetic properties |
| IEC 60404-6 Corrigendum 1-2009 | 磁性材料.第6部分:通过环形试样的使用对频率范围在20Hz～200kHz的软磁金属和粉末材料磁性的测量方法 | Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens; Corrigendum 1 |
| IEC 60404-6-2003 | 磁性材料.第6部分:使用环形试样的频率范围在20至200kHz的软磁金属材料和粉末材料磁性能的测量方法 | Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens |
| IEC 60404-7-1982 | 磁性材料 第7部分:开磁路中磁性材料矫顽力的测量方法 | Magnetic materials. Part 7 : Method of measurement of the coercivity of magnetic materials in an open magnetic circuit |
| IEC 60441-1974 | 阴极射线管荧光屏发光的光度和色度测量方法 | Photometric and colorimetric methods of measurement of the light emitted by a cathode-ray tube screen |
| IEC 60442 AMD 1-2003 | 家用和类似用途的电烤箱.性能的测量方法.修改件1 | Electric toasters for household and similar purposes - Methods for measuring the performance; Amendment 1 |
| IEC 60442 Edition 2.1-2003 | 家用和类似用途的电烤箱.性能的测量方法 | Electric toasters for household and similar purposes - Methods for measuring the performance |
| IEC 60444-4-1988 | 用π型网络的零相位技术测量石英谐振器参数.第4部分:石英晶体元件负荷谐振频率fl、负荷谐振电阻Rl的测量方 | Measurement of quartz crystal unit parameters by zero phase technique in a -network; part 4: method for the measurement of the load resonance frequency FL load resonance resistance RL and the calculation of other derived values of quartz crystal units, up to 30 MHz |
| IEC 60457-1-1974 | 刚性精密同轴线及其相关的精密连接器 第1部分:一般要求和测量方法 | Rigid precision coaxial lines and their associated precision connectors. Part 1 : General requirements and measuring methods |
| IEC 60468-1974 | 金属材料电阻率测量方法 | Method of measurement of resistivity of metallic materials |
| IEC 60487-1-1984 | 地面无线电中继系统所用设备的测量方法 第1部分:分系统和模拟无线电中继系统通用测量方法 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 1 : Measurements common to sub-systems and simulated radio-relay systems |
| IEC 60487-2-1-1981 | 地面无线电中继系统所用设备的测量方法 第2部分:分系统测量 第1节:总则 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section One - General |
| IEC 60487-2-2-1981 | 地面无线电中继系统所用设备的测量方法 第2部分:分系统测量 第2节:备用信道转换设备 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Two - Stand-by channel switching equipment |
| IEC 60487-2-3-1984 | 地面无线电中继系统所用设备的测量方法 第2部分:分系统测量 第3节:射频分支网络 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Three - R.F. branching networks |
| IEC 60487-2-4-1984 | 地面无线电中继系统所用设备的测量方法 第2部分:分系统测量 第4节:频率调制器 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Four - Frequency modulators |
| IEC 60487-2-5-1984 | 地面无线电中继系统所用设备的测量方法 第2部分:分系统测量 第5节:频率调制器 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Five - Frequency demodulators |
| IEC 60487-2-6-1984 | 地面无线电中继系统所用设备的测量方法 第2部分:分系统测量 第6节:分集、双路和热备用设备 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Six - Diversity, twin-path and hot stand-by equipment |
| IEC 60487-2-7-1986 | 地面无线电中继系统所用设备的测量方法 第2部分:分系统测量 第7节:无线电发射机 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Seven - Radio transmitters |
| IEC 60487-2-8-1986 | 地面无线电中继系统所用设备的测量方法 第2部分:分系统测量 第8节:无线电接收机 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Eight - Radio receivers |
| IEC 60487-3-1975 | 地面无线电中继系统所用设备的测量方法 第3部分:模拟系统 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 : Simulated systems |
| IEC 60487-3-2-1981 | 地面无线电中继系统所用设备的测量方法 第3部分:模拟系统 第2节:基带测量 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 : Simulated systems. Section Two - Measurements in the baseband |
| IEC 60487-3-3-1981 | 地面无线电中继系统所用设备的测量方法 第3部分:模拟系统 第3节:黑白和彩色电视传输的测量 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 : Simulated systems. Section Three - Measurements for monochrome and colour television transmission |
| IEC 60487-3-4-1982 | 地面无线电中继系统所用设备的测量方法 第3部分:模拟系统 第4节:频分多路传输的测量 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 : Simulated systems. Section Four - Measurements for f.d.m. transmission |
| IEC 60487-3-5-1982 | 地面无线电中继系统所用设备的测量方法 第3部分:模拟系统 第5节:互干扰测量 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 : Simulated systems. Section Five - Measurement of mutual interference |
| IEC 60487-3-6-1984 | 地面无线电中继系统所用设备的测量方法 第3部分:模拟系统 第6节:声音节目传输测量 | Methods of measurement for equipment used in terrestrial radio-relay systems. Part 3 : Simulated systems. Section Six - Measurements for sound-programme transmission |
| IEC 60489-1 AMD 1-1996 | 移动业务中用的无线电设备的测量方法 第1部分:通用定义和测量的标准条件 修改1 | Methods of measurement for radio equipment used in the mobile services - Part 1: General definitions and standard conditions of measurement; Amendment 1 |
| IEC 60489-1 AMD 2-1999 | 移动业务中用的无线电设备的测量方法 第1部分:通用定义和测量的标准条件 修改2 | Methods of measurement for radio equipment used in the mobile services - Part 1: General definitions and standard conditions of measurement; Amendment 2 |
| IEC 60489-1-1983 | 移动业务中用的无线电设备的测量方法 第1部分:通用定义和测量的标准条件 | Methods of measurement for radio equipment used in the mobile services. Part 1 : General definitions and standard conditions of measurement |
| IEC 60489-2 AMD 1-1999 | 移动业务中用的无线电设备的测量方法 第2部分:采用A3E、F3E或G3E发射的发射机 修改1 | Methods of measurement for radio equipment used in the mobile services - Part 2: Transmitters employing A3E, F3E or G3E emissions; Amendment 1 |
| IEC 60489-2-1991 | 移动业务中用的无线电设备的测量方法 第2部分:采用A3E、F3E或G3E发射的发射机 | Methods of measurement for radio equipment used in the mobile services; part 2: transmitters employing A3E, F3E or G3E emissions |
| IEC 60489-3 AMD 1-1999 | 移动业务中用的无线电设备的测量方法 第3部分:对A3E或F3E发射的接收机 修改1 | Methods of measurement for radio equipment used in the mobile services - Part 3: Receivers employing A3E, F3E or G3E emissions; Amendment 1 |
| IEC 60489-3-1988 | 移动业务中用的无线电设备的测量方法 第3部分:对A3E或F3E发射的接收机 | Methods of measurement for radio equipment used in the mobile services; part 3: receivers for A3E or F3E emissions |
| IEC 60489-4-1991 | 移动业务中用的无线电设备的测量方法 第4部分:采用单边带发射(R3E、H3E或J3E)的发射机 | Methods of measurement for radio equipment used in the mobile services; part 4: transmitters employing single-sideband emissions (R3E, H3E or J3E) |
| IEC 60489-5-1987 | 移动业务中用的无线电设备的测量方法 第5部分:采用单边带技术(R3E、H3E或J3E)的接收机 | Methods of measurement for radio equipment used in the mobile services; part 5: receivers employing single-sideband techniques (R3E, H3E or J3E) |
| IEC 60489-6-1999 | 移动业务中用的无线电设备的测量方法 第6部分:数据设备 | Radio equipment used in mobile services - Methods of measurement - Part 6: Data equipment |
| IEC 60489-8 AMD 1-2000 | 移动业务中用的无线电设备的测量方法 第8部分:修改1:天线及辅助设备的测量方法 | Methods of measurement for radio equipment used in the mobile services - Part 8: Methods of measurement for antennas and ancillary equipment; Amendment 1 |
| IEC 60489-8-1984 | 移动业务中用的无线电设备的测量方法 第8部分:天线 | Methods of measurement for radio equipment used in the mobile services. Part 8 : Methods of measurement for antennas |
| IEC 60510-1-1975 | 卫星地面站用无线电设备的测量方法 第1部分:总则 | Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : General |
| IEC 60510-1-2-1984 | 卫星地面站用无线电设备的测量方法 第1部分:分系统和分系统组合通用的测量 第2节:射频范围内的测量 | Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : Measurements common to sub-systems and combinations of sub-systems.. Section Two - Measurements in the r.f. range |
| IEC 60510-1-3 AMD 1-1988 | 卫星地面站用无线电设备的测量方法 第1部分:分系统和分系统组合通用的测量 第3节:中频范围内的测量 修改1 | Methods of measurement for radio equipment used in satellite earth stations; part 1: measurements common to sub-systems and combinations of sub-systems; section three: measurements in the i.f. range; amendment No. 1 to publication 60510-1-3 (1980) |
| IEC 60510-1-3-1980 | 卫星地面站用无线电设备的测量方法 第1部分:分系统和分系统组合通用的测量 第3节:中频范围内的测量 | Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : Measurements common to sub-systems and combinations of sub-systems.. Section Three - Measurements in the i.f. range |
| IEC 60510-1-4-1986 | 卫星地面站用无线电设备的测量方法 第1部分:分系统和分系统组合通用的测量 第4节:基带的测量 | Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : Measurements common to sub-systems and combinations of sub-systems.. Section Four - Measurement in the baseband |
| IEC 60510-1-5-1988 | 卫星地面站用无线电设备的测量方法 第1部分:分系统和分系统组合通用的测量 第5节:噪声温度测量 | Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. Section Five: Noise temperature measurements |
| IEC 60510-1A-1980 | 卫星地面站用无线电设备的测量方法 第1部分:分系统和分系统组合通用的测量 补充1:6.2条:直流电源条件 | Methods of measurement for radio equipment used in satellite earth stations.. Part 1 : Measurements common to sub-systems and combinations of sub-systems.. First supplement: Sub-clause 6.2: D.C. source conditions |
| IEC 60510-2-1 AMD 1-1989 | 卫星地面站用无线电设备的测量方法 第2部分:分系统测量 第1节:总则 第2节:天线(包括馈线网络) 修改1 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurements for sub-systems; section one: general; section two: antenna (including feed network); amendment No. 1 to IEC 60510-2-1:1976 |
| IEC 60510-2-1-1978 | 卫星地面站用无线电设备的测量方法 第2部分:分系统测量 第1节:总则 第2节:天线(包括馈线网络) | Methods of measurement for radio equipment used in satellite earth stations.. Part 2 : Measurements for sub-system. Section One - General. Section Two - Antenna (including network) |
| IEC 60510-2-3-1989 | 卫星地面站用无线电设备的测量方法 第2部分:分系统测量 第3节:低噪声放大器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurements for sub-systems; section three: low-noise amplifier |
| IEC 60510-2-4-1988 | 卫星地面站用无线电设备的测量方法 第2部分:分系统测量 第4节:上、下变频器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurements for sub-systems; section four: up- and down-converters |
| IEC 60510-2-5-1992 | 卫星地面站用无线电设备的测量方法 第2部分:分系统测量 第5节:频率调制器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurement for sub-systems; section 5: frequency modulators |
| IEC 60510-2-6-1992 | 卫星地面站用无线电设备的测量方法 第2部分:分系统测量 第6节:频率解调器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurement for sub-systems; section 6: frequency demodulators |
| IEC 60510-2-7-1989 | 卫星地面站用无线电设备的测量方法 第2部分:分系统测量 第7节:大功率放大器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurements for sub-systems; section seven, high-power amplifier |
| IEC 60510-3-1-1981 | 卫星地面站用无线电设备的测量方法 第3部分:分系统组合测量方法 第1节:总则 | Methods of measurement for radio equipment used in satellite earth stations. Part 3 : Methods of measurement for combinations of sub-systems. Section One - General |
| IEC 60510-3-2-1980 | 卫星地面站用无线电设备的测量方法 第3部分:分系统组合测量方法 第2节:频率范围为4GHz～6GHz的接收系统品质 | Methods of measurement for radio equipment used in satellite earth stations. Part 3: Methods of measurement on combinations of sub-systems. Section Two: Measurement of the figure of merit (G/T) of the receiving system in the 4 GHz to 6 GHz range |
| IEC 60510-3-3-1988 | 卫星地面站用无线电设备的测量方法 第3部分:分系统组合测量方法 第3节:黑白电视和彩色电视传输的测量 | Methods of measurement for radio equipment used in satellite earth stations; part 3: methods of measurement for combination of sub-systems; section three; measurements for monochrome and colour television transmission |
| IEC 60510-3-4-1992 | 卫星地面站用无线电设备的测量方法 第3部分:分系统组合测量方法 第4节:频分多路传输的测量 | Methods of measurement for radio equipment used in satellite earth stations; part 3: methods of measurement on combinations of sub-systems; section 4: measurements for frequency division multiplex (f.d.m) transmission |
| IEC 60512-1-3-1997 | 电子设备用机电元件 基本试验程序和测量方法 第1部分:一般检查 第3节:试验1c:电气啮合长度 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length |
| IEC 60512-1-4 Corrigendum 1-2000 | 电子设备用机电元件.基本测试程序和测量方法.第1部分:总则.第4节:试验1d:触点防护效果(防碰擦) | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof) |
| IEC 60512-1-4-1997 | 电子设备用机电元件 基本试验程序和测量方法 第1部分:总则 第4节:试验1d:接触件保护效率(防铲) | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof) |
| IEC 60512-10-4-2003 | 电子设备用连接件.试验和测量方法.第10-4部分:撞击试验(自由元件)、静负荷试验(固定元件)、寿命试验和过负 | Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance test and overload tests; Test 10d: Electrical overload (connectors) |
| IEC 60512-11-1-1995 | 电子设备用机电元件 基本试验程序和测量方法 第11部分:气候试验 第1节:试验11a:气候顺序 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a: Climatic sequence |
| IEC 60512-11-7-2003 | 电子设备用连接器.试验和测量方法.第11-7部分:气候试验.试验11g:流动混合气体腐蚀试验 | Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests; Test 11g: Flowing mixed gas corrosion test |
| IEC 60512-11-8-1995 | 电子设备用机电元件 基本试验程序和测量方法 第11部分:气候试验 第8节:试验11h:砂尘 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h: Sand and dust |
| IEC 60512-12-6-1996 | 电子设备用机电元件 基本试验程序和测量方法 第12部分:锡焊试验 第6节:试验12f:机焊密封处耐焊剂和清洁溶剂 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering |
| IEC 60512-14-7-1997 | 电子设备用机电元件 基本试验程序和测量方法 第14部分:密封性试验 第7节:试验14g:冲水试验 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water |
| IEC 60512-15-8-1995 | 电子设备用机电元件 基本试验程序和测量方法 第15部分:接触件及引出端机械试验 第8节:试验15h:接触件固定机 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h: Contact retention system resistance to tool application |
| IEC 60512-16-20-1996 | 电子设备用机电元件 基本试验程序和测量方法 第16部分:接触件及引出端的机械试验 第20节:试验16t:机械强度( | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections) |
| IEC 60512-19-3-1997 | 电子设备用机电元件 基本试验程序和测量方法 第19部分:耐化学品试验 第3节:试验19c:耐焊剂 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c: Fluid resistance |
| IEC 60512-20-2-2000 | 电子设备用机电元件-基本试验程序和测量方法 第20-2部分:试验20b:易燃性试验 防火性 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness |
| IEC 60512-23-3 Corrigendum 1-2003 | 电子设备用电机元件.基本测试程序和测量方法.第23-3部分:试验23c:连接器和附件的屏蔽效果 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories |
| IEC 60512-23-3-2000 | 电子设备用电机元件.基本试验程序和测量方法.第23-3部分:试验23c.连接件和附属件的屏蔽效应 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories |
| IEC 60512-26-100-2008 | 电子设备用连接器.试验和测量.第26-100部分:根据IEC 60603-7连接器用测量装置、试验和参考顺序和测量方法. | Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g |
| IEC 60512-5-1992 | 电子设备用机电元件.基本试验规程和测量方法.第5部分:冲击试验(不固定元件).静载试验(固定元件).寿命试验和 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods; part 5: impact tests (free components), static load tests (fixed components), endurance tests and overload tests |
| IEC 60512-6-1984 | 电子设备用机电元件.基本试验规程和测量方法.第6部分:气候试验和锡焊试验 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6 : Climatic tests and soldering tests |
| IEC 60512-6-5-1997 | 电子设备用机电元件 基本试验程序和测量方法 第6部分:动态应力试验 第5节:试验6e:随机振动 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration |
| IEC 60512-9-1992 | 电子设备用机电元件 基本试验程序和测量方法 第9部分:杂项试验 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods; part 9: miscellaneous tests |
| IEC 60556-2006 | 用于微波频率的旋磁材料.性能的测量方法 | Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties |
| IEC 60661 AMD 1-2003 | 家用电咖啡壶性能的测量方法.修改件1 | Methods for measuring the performance of electric household coffee makers; Amendment 1 |
| IEC 60661 AMD 2-2005 | 家用电咖啡壶的性能测量方法.修改件2 | Methods for measuring the performance of electric household coffee makers; Amendment 2 |
| IEC 60675 Edition 2.1-1998 | 家用电直接式房间加热器.性能测量方法 | Household electric direct-acting room heaters - Methods for measuring performance |
| IEC 60675-1994 | 家用房间电暖炉性能的测量方法 | Household electric direct-acting room heaters - Methods for measuring performance |
| IEC 60682 AMD 1-1987 | 石英卤钨灯夹封部位温度的标准测量方法 修改1 | Standard method of measuring the pinch temperature of quartz-tungstenhalogen lamps |
| IEC 60682 AMD 2-1997 | 石英卤钨灯夹封部位温度的标准测量方法 修改2 | Method of measuring the pinch temperature of quartz glass lamps; Amendment 2 |
| IEC 60682-1980 | 石英卤钨灯夹封部位温度的标准测量方法 | Standard method of measuring the pinch temperature of quartz-tungstenhalogen lamps |
| IEC 60705 AMD 1-2004 | 家用微波炉.性能测量方法.修改件1 | Household microwave ovens - Methods for measuring performance; Amendment 1 |
| IEC 60705 AMD 2-2006 | 家用微波炉.性能测量方法.修改件2 | Household microwave ovens - Methods for measuring performance; Amendment 2 |
| IEC 60705 Edition 3.1-2004 | 家用微波炉.性能测量方法 | Household microwave ovens - Methods for measuring performance |
| IEC 60732-1982 | 磁性氧化物圆柱形、管形和螺纹磁芯的测量方法 | Measuring methods for cylinder cores, tube cores and screw cores of magnetic oxides |
| IEC 60735-1991 | 录像带性能的测量方法 | Measuring methods for video tape properties |
| IEC 60747-5-3 Edition 1.1-2009 | 分立半导体器件及集成电路.第5-3部分:光电元件.测量方法 | Discrete semiconductor devices and integrated circuits - Part 5-3: Optoelectronic devices - Measuring methods |
| IEC 60793-1-1-2008 | 光纤.第1-1部分:测量方法和试验程序.总则和指南 | Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance |
| IEC 60793-1-20-2001 | 光纤 第1-20部分：测量方法和试验规程 纤维几何结构 | Optical fibres - Part 1-20: Measurement methods and test procedures; Fibre geometry |
| IEC 60793-1-21-2001 | 光纤 第1-21部分：测量方法和试验规程 被覆层几何结构 | Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry |
| IEC 60793-1-22-2001 | 光纤 第1-22部分：测量方法和试验规程 长度测量 | Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement |
| IEC 60793-1-30-2001 | 光纤 第1-30部分：测量方法和试验规程 纤维验证试验 | Optical fibres - Part 1-30: Measurement methods and test procedures; Fibre proof test |
| IEC 60793-1-31-2001 | 光纤 第1-31部分：测量方法和试验规程 抗拉强度 | Optical fibres - Part 1-31: Measurement methods and test procedures; Tensile strength |
| IEC 60793-1-32-2001 | 光纤 第1-32部分：测量方法和试验规程 被覆层可剥性 | Optical fibres - Part 1-32: Measurement methods and test procedures; Coating strippability |
| IEC 60793-1-33-2001 | 光纤 第1-33部分：测量方法和试验规程 应力腐蚀敏感度 | Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility |
| IEC 60793-1-34-2006 | 光学纤维.第1-34:部分:测量方法和试验程序.纤维卷曲 | Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl |
| IEC 60793-1-40-2001 | 光纤 第1-40部分：测量方法和试验规程 衰减 | Optical fibres - Part 1-40: Measurement methods and test procedures; Attenuation |
| IEC 60793-1-41-2003 | 光学纤维.第1-41部分:测量方法和试验程序.频带宽度 | Optical fibres - Part 1-41: Measurement methods and test procedures; Bandwidth |
| IEC 60793-1-42-2007 | 光纤.第1-42部分:测量方法和试验程序.色散 | Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion |
| IEC 60793-1-43-2001 | 光纤 第1-43部分：测量方法和试验规程 数值孔径 | Optical fibres - Part 1-43: Measurement methods and test procedures; Numerical aperture |
| IEC 60793-1-44-2001 | 光纤 第1-44部分：测量方法和试验规程 截止波长 | Optical fibres - Part 1-44: Measurement methods and test procedures; Cut-off wavelength |
| IEC 60793-1-45 Corrigendum 1-2002 | 光纤.第1-45部分:测量方法和试验规程.模场直径 | Optical fibres - Part 1-45: Measurement methods and test procedures; Mode field diameter |
| IEC 60793-1-45-2001 | 光纤 第1-45部分：测量方法和试验规程 模场直径 | Optical fibres - Part 1-45: Measurement methods and test procedures; Mode field diameter |
| IEC 60793-1-46-2001 | 光纤 第1-46部分：测量方法和试验规程 光透射比变化的监测 | Optical fibres - Part 1-46: Measurement methods and test procedures; Monitoring of changes in optical transmittance |
| IEC 60793-1-47-2009 | 光纤.第1-47部分:测量方法和试验程序.挠度损耗 | Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss |
| IEC 60793-1-48-2007 | 光纤.第1-48部分:测量方法和试验程序.偏振模色散 | Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion |
| IEC 60793-1-49-2006 | 光学纤维.第1-49部分:测量方法和试验程序.差分模延迟 | Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay |
| IEC 60793-1-50-2001 | 光纤 第1-50部分：测量方法和试验规程 湿热（稳态） | Optical fibres - Part 1-50: Measurement methods and test procedures; Damp heat (steady state) |
| IEC 60793-1-51-2001 | 光纤 第1-51部分：测量方法和试验规程 干热 | Optical fibres - Part 1-51: Measurement methods and test procedures; Dry heat |
| IEC 60793-1-52-2001 | 光纤 第1-52部分：测量方法和试验规程 温度变化 | Optical fibres - Part 1-52: Measurement methods and test procedures; Change of temperature |
| IEC 60793-1-53-2001 | 光纤 第1-53部分：测量方法和试验规程 浸水 | Optical fibres - Part 1-53: Measurement methods and test procedures; Water immersion |
| IEC 60793-1-54-2003 | 光学纤维.第1-54部分:测量方法和试验规程.Υ幅射 | Optical fibres - Part 1-54: Measurement methods and test procedures; Gamma irradiation |
| IEC 60835-1-1-1990 | 数字微波无线电传输系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第1节:总则 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section one: general |
| IEC 60835-1-2 AMD 1-1995 | 数字微波无线电传输系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第2节:基本 | Methods of measurement for equipment used in digital microwave transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 2: Basic characteristics; Amendment 1 |
| IEC 60835-1-2-1992 | 数字微波无线电传输系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第2节:基本 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section 2: basic characteristics |
| IEC 60835-1-3 AMD 1-1995 | 数字微波无线电传榆系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第3节:传输 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 3: Transmission characteristics; Amendment 1 |
| IEC 60835-1-3-1992 | 数字微波无线电传输系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第3节:传输 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section 3: transmission characteristics |
| IEC 60835-1-4 AMD 1-1995 | 数字微波无线电传输系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第4节:传输 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 4: Transmission performance; Amendment 1 |
| IEC 60835-1-4-1992 | 数字微波无线电传输系统使用设备的测量方法 第1部分:地面无线电中继系统和卫星地面站通用的测量 第4节:传输 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 1: measurements common to terrestrial radio-relay systems and satellite earth stations; section 4: transmission performance |
| IEC 60835-2-1-1990 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第1节:总则 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section one: general |
| IEC 60835-2-10-1992 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第10节:系统总性能 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 10: overall system performance |
| IEC 60835-2-11-1996 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第11节:交叉极化干扰消除器 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 11: Cross-polarization interference canceller |
| IEC 60835-2-2-1994 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第2节:天线 | Methods of measurement for equipment used in digital microwave transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 2: Antenna |
| IEC 60835-2-3-1992 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第3节:RF分支网络 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 3: RF branching networks |
| IEC 60835-2-4 AMD 1-1997 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第4节:发射机/接收机包括调 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 4: Transmitter/receiver including modulator/demodulator; Amendment 1 |
| IEC 60835-2-4 Edition 1.1-1998 | 数字微波无线电传输系统使用设备的测量方法.第2-4部分:地面无线电中继系统的测量.包括调制器/解调器的发射 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2-4: Measurements on terrestrial radio-relay systems; Transmitter/receiver including modulator/demodulator |
| IEC 60835-2-4-1993 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第4节:发射机/接收机包括调 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 4: transmitter/receiver including modulator/demodulator |
| IEC 60835-2-5-1993 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第5节:数字信号处理子系统 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 5: digital signal processing sub-system |
| IEC 60835-2-6-1995 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第6节:保护开关 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 6: Protection switching |
| IEC 60835-2-7-1994 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第7节:分集转换和联合设备 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 7: Diversity switching and combining equipment |
| IEC 60835-2-8 AMD 1-1996 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第8节:自适应均衡器 修改1 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 8: Adaptive equalizer; Amendment 1 |
| IEC 60835-2-8-1993 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第8节:自适应均衡器 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 2: measurements on terrestrial radio-relay systems; section 8: adaptive equalizer |
| IEC 60835-2-9-1995 | 数字微波无线电传输系统使用设备的测量方法 第2部分:地面无线电中继系统的测量 第9节:业务信道 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 9: Service channels |
| IEC 60835-3-1-1990 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第1节:总则 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section one: general |
| IEC 60835-3-10-1994 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第10节:终端设备-TDMA地面站话务量 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 10: Terminal equipment - TDMA traffic earth station |
| IEC 60835-3-11-1995 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第11节:SCPC-PSK传输业务信道设备 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 11: Service channel equipment for SCPC-PSK transmission |
| IEC 60835-3-12-1993 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第12节:系统总性能 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section 12: overall system performance |
| IEC 60835-3-13-1996 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第13节:VSAT系统 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 13: VSAT systems |
| IEC 60835-3-14-1996 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第14节:卫星新闻收集用地面站(SNG) | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 14: Earth stations for satellite news gathering (SNG) |
| IEC 60835-3-2-1995 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第2节:天线 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 2: Antenna |
| IEC 60835-3-4-1993 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第4节:低噪声放大器 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section 4: low noise amplifier |
| IEC 60835-3-5-1994 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第5节:上、下变频器 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurement on satellite earth stations - Section 5: Up- and down-converters |
| IEC 60835-3-6-1996 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第6节:大功率放大器 | Methods of measurement for equipment used in digital microwave transmission systems - Part 3: Measurements on satellite earth stations - Section 6: High-power amplifiers |
| IEC 60835-3-7-1995 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第7节:接收系统的品质因数 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 7: Figure-of-merit of receiving system |
| IEC 60835-3-9-1993 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第9节:SCP-PSK终端设备 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section 9: terminal equipment SCP-PSK |
| IEC 60883-1987 | 磁带录像机的色度信号与随机噪声之比的测量方法 | Measuring method for chrominance signal-to-random noise ratio for video tape recorders |
| IEC 60904-10-2009 | 光伏器件.第10部分:线性测量方法 | Photovoltaic devices - Part 10: Methods of linearity measurement |
| IEC 60911-1987 | 监测加压轻水反应堆堆芯充分冷却的测量方法 | Measurements for monitoring adequate cooling within the core of pressurized light water reactors |
| IEC 60990-1999 | 接触电流和保护导体电流的测量方法 | Methods of measurement of touch current and protective conductor current |
| IEC 61000-4-10 Edition 1.1-2001 | 电磁兼容性.第4-10部分:试验和测量方法.阻尼振动磁场抗扰试验 | Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques; Damped oscillatory magnetic field immunity test |
| IEC 61000-4-15 AMD 1-2003 | 电磁兼容性.第4-15部分:试验和测量方法.闪烁计功能和设计规范.修改1 | Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques; Flickermeter; Functional and design specifications; Amendment 1 |
| IEC 61000-4-15 Edition 1.1-2003 | 电磁兼容性.第4部分:试验和测量方法.第15节:闪烁计.功能和设计规范 | Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques; Section 15: Flickermeter; Functional and design specifications |
| IEC 61000-4-20 AMD 1-2006 | 电磁兼容性(EMC).第4-20部分:试验和测量方法.横向电磁波导的辐射和干扰试验.修改件1 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides; Amendment 1 |
| IEC 61000-4-20 Edition 1.1-2007 | 电磁兼容性(EMC).第4-20部分:试验和测量方法.横向电磁(TEM)波导的辐射和干扰试验 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| IEC 61000-4-20-2003 | 电磁兼容性.第4-20部分:试验和测量方法.横向电磁波导辐射和干扰试验 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques; Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| IEC 61000-4-30-2008 | 电磁兼容性(EMC).测试和测量技术.电能质量测量方法 | Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power quality measurement methods |
| IEC 61000-4-33-2005 | 电磁兼容性(EMC).第4-33部分:试验和测量技术.高压瞬态参数的测量方法 | Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters |
| IEC 61000-4-9 Edition 1.1-2001 | 电磁兼容性.第4-9部分:试验和测量方法.脉冲磁场抗扰试验 | Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques; Pulse magnetic field immunity test |
| IEC 61007-1994 | 电子和通信设备用变压器和电感器 测量方法和试验程序 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures |
| IEC 61041-1-1990 | 非广播用录像机 测量方法 第1部分:通用视频(NTSC/PAL)和声频(纵向)特性 | Non-broadcast video tape recorders; methods of measurement; part 1: general video (NTSC/PAL) and audio (longitudinal) characteristics |
| IEC 61041-2-1994 | 非广播用录像机 测量方法 第2部分:SECAM 录像机色度特性 | Non-broadcast video tape recorders - Methods of measurement - Part 2: Video characteristics chrominance SECAM |
| IEC 61041-3-1993 | 非广播用录像机 测量方法 第3部分:用FM信号录音的声频特性 | Non-broadcast videotape recorders; methods of measurement; part 3: audio characteristics for FM recording |
| IEC 61041-4-1997 | 非广播用录像机 测量方法 第4部分:校准带(NTSC/PAL/SECAM) | Non-broadcast video tape recorders - Methods of measurement - Part 4: Calibration tape (NTSC/PAL/SECAM) |
| IEC 61041-5-1997 | 非广播用录像机 测量方法 第5部分:高频磁带录像机,其中包括那些装配有Y/C图像连接器(NTSC/PAL)的高频磁带录 | Non-broadcast video tape recorders - Methods of measurement - Part 5: High-band video tape recorders, including those equipped with Y/C video connectors (NTSC/PAL) |
| IEC 61079-1-1992 | 12GHz频带卫星广播传输接收机的测量方法 第1部分:露天设备的射频测量 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 1: radio-frequency neasurements on outdoor units |
| IEC 61079-2-1992 | 12GHz频带卫星广播传输接收机的测量方法 第2部分:DBS调谐设备的电气测量 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 2: electrical measurements on DBS tuner units |
| IEC 61079-3-1993 | 12GHz频带卫星广播传输接收机的测量方法 第3部分:包括户外装置和DBS调谐装置的接收系统的总性能的电气测量 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 3: electrical measurements of overall performance of receiver systems comprising an outdoor unit and a DBS tuner unit |
| IEC 61079-4-1993 | 12GHz频带卫星广播传输接收机的测量方法 第4部分:NTSC制式数字副载波系统的声音/数据解码器装置的电气测量 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 4: electrical measurements on sound/data decoder units for the digital subcarrier NTSC system |
| IEC 61079-5-1993 | 12GHz频带卫星广播传输接收机的测量方法 第5部分:MAC/包系统用解码器单元的电气测量 | Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 5: electrical measurements on decoder units for MAC/packet systems |
| IEC 61096 AMD 1-1996 | 数字音频激光唱盘重放设备特性的测量方法 修改1 | Methods of measuring the characteristics of reproducing equipment for digital audio compact discs; Amendment 1 |
| IEC 61096-1992 | 数字音频激光唱盘重放设备特性的测量方法 | Methods of measuring the characteristics of reproducing equipment for digital audio compact discs |
| IEC 61106-1993 | 视盘 参数的测量方法 | Videodisks; methods of measurement for parameters |
| IEC 61114-2-1996 | 11/12GHz频带卫星广播传输接收天线的测量方法 第2部分:个人用及共用接收天线的机械和环境试验 | Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12 GHz band - Part 2: Mechanical and environmental tests on individual and collective receiving antennas |
| IEC 61120-4-1992 | 专业用6.3mm磁带的数字音频盘式磁带录音系统 第4部分:磁带性能:定义和测量方法 | Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use; part 4: magnetic tape properties; definitions and methods of measurement |
| IEC 61121 Corrigendum 1-2003 | 家用滚筒式干衣机.性能测量方法 | Tumble dryers for household use - Methods for measuring the performance |
| IEC 61121-2002 | 家用滚筒式干燥器性能的测量方法 | Tumble dryers for household use - Methods for measuring the performance |
| IEC 61146-1-1994 | 摄像机(PAL/SECAN/NTSC) 测量方法 第1部分:非广播单传感器摄像机 | Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 1: Non-broadcast single-sensor cameras |
| IEC 61146-2-1997 | 摄像机(PAL/SECAN/NTSC) 测量方法 第2部分:两个和三个传感器的专业摄像机 | Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 2: Two- and three-sensor professional cameras |
| IEC 61146-3-1997 | 摄像机(PAL/SECAN/NTSC) 测量方法 第3部分:非广播用摄像记录器 | Video cameras (PAL/SECAM/NTSC) - Methods of measurements - Part 3: Non-broadcast camera-recorders |
| IEC 61146-4-1998 | 摄像机(PAL/SECAN/NTSC) 测量方法 第4部分:摄像机和摄像记录器的自动功能 | Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 4: Automatic functions of video cameras and camera-recorders |
| IEC 61169-1 AMD 1-1996 | 射频连接器 第1部分:总规范 一般要求和测量方法 修改1 | Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods; Amendment 1 |
| IEC 61169-1 AMD 2-1997 | 射频连接器 第1部分:总规范 一般要求和测量方法 修改2 | Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods; Amendment 2 |
| IEC 61169-1 Edition 1.2-1998 | 射频连接器.第1部分:总规范.一般要求和测量方法 | Radio-frequency connectors - Part 1: Generic specification; General requirements and measuring methods |
| IEC 61169-1-1992 | 射频连接器 第1部分:总规范 一般要求和测量方法 | Radio-frequency connectors; part 1: generic specification; general requirements and measuring methods |
| IEC 61191-6-2010 | 印刷电路板组件.第6部分:球栅阵列和网格阵列的焊接接头内空隙及测量方法用评定标准 | Printed board assemblies - Part 6: Evaluation criteria for voids in soldered joints of BGA and LGA and measurement method |
| IEC 61237-1-1994 | 广播磁带录像机 测量方法 第1部分:机械测量 | Broadcast video tape recorders - Methods of measurement - Part 1: Mechanical measurements |
| IEC 61237-2-1995 | 广播磁带录像机 测量方法 第2部分:模拟复合视频信号的电气测量 | Broadcast video tape recorders - Methods of measurement - Part 2: Electrical measurements of analogue composite video signals |
| IEC 61237-3 Corrigendum 1-1995 | 广播磁带录像机的测量方法.第3部分:模拟视频信号的电气测量 | Methods of measurement for broadcast video tape recorders - Part 3: Electrical measurements for analogue component video signals;Corrigendum 1 |
| IEC 61237-3-1995 | 广播磁带录像机 测量方法 第3部分:模拟视频信号的电气测量 | Methods of measurement for broadcast video tape recorders - Part 3: Electrical measurements for analogue component video signals |
| IEC 61237-4-1997 | 广播磁带录像机 测量方法 第4部分:模拟音频性能测量 | Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements |
| IEC 61280-1-4-2009 | 光纤通信子系统试验程序.第1-4部分:一般通信子系统.光源环形通量测量方法 | Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method |
| IEC 61290-6-1-1998 | 光学纤维放大器 基础规范 第6-1部分:泵浦泄漏参数的测量方法 光解复用器 | Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer |
| IEC 61338-1-3-1999 | 波导型介电谐振器 第1-3部分:一般信息和试验条件 微波介电谐振器材料复相对介电常数测量方法 | Waveguide type dielectric resonators - Part 1-3: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency |
| IEC 61338-1-4-2005 | 波导型介电谐振器.第1-4部分:一般信息和试验条件.毫米波频率时介电谐振器材料的相对复介电常数测量方法 | Waveguide type dielectric resonators - Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency |
| IEC 61340-2-1-2002 | 静电学.第2-1部分:材料和产品损耗静电荷的能力的测量方法 | Electrostatics - Part 2-1: Measurement methods; Ability of materials and products to dissipate static electric charge |
| IEC 61580-1-1996 | 波导测量方法 第1部分:偏振面的退耦和旋转 | Methods of measurement for waveguides - Part 1: Decoupling and rotation of the plane of polarization |
| IEC 61580-2-1996 | 波导测量方法 第2部分:互调电平 | Methods of measurement for waveguides - Part 2: Level of intermodulation products |
| IEC 61580-3-1997 | 波导测量方法 第3部分:群时延的变化 | Methods of measurement for waveguides - Part 3: Variation of group delay |
| IEC 61580-4 Corrigendum 1-2006 | 波导测量方法 第4部分:波导和波导组件的衰减.勘误1 | Methods of measurement for waveguides - Part 4: Attenuation of waveguide and waveguide assemblies - Corrigendum 1 |
| IEC 61580-4-1997 | 波导测量方法 第4部分:波导和波导组件的衰减 | Methods of measurement for waveguides - Part 4: Attenuation of waveguide and waveguide assemblies |
| IEC 61580-7-1996 | 波导测量方法 第7部分:图解法测定波导管性能 | Methods of measurement for waveguides - Part 7: Graphical method for the determination of waveguide performance |
| IEC 61580-8-1996 | 波导测量方法 第8部分:波导功率容量 | Methods of measurement for waveguides - Part 8: Waveguide power holding capability |
| IEC 61580-9-1996 | 波导测量方法 第9部分:矩形波导接口处的反射系数 | Methods of measurement for waveguides - Part 9: Reflection coefficient at rectangular waveguide interfaces |
| IEC 61599-1999 | 视盘播放器 测量方法 | Videodisk players - Methods of measurement |
| IEC 61606-3-2008 | 音频和视听设备.数字音频部分.音频特性的基本测量方法.第3部分:专业使用 | Audio and audiovisual equipment - Digital audio parts - Basic measurements methods of audio characteristics - Part 3: Professional use |
| IEC 61606-4-2005 | 音频和视听设备.数字音频部分.音频特性的基本测量方法.第4部分:个人电脑 | Audio and audiovisual equipment - Digital audio parts - Basic measurements methods of audio characteristics - Part 4: Personal computer |
| IEC 61689-2007 | 超音波学.物理疗法系统.频率范围0.5MHz～5MHz的现场规范和测量方法 | Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz |
| IEC 61747-6-2004 | 液晶和固态显示器件.第6部分:液晶模数的测量方法.透射型 | Liquid crystal and solid-state display devices - Part 6: Measuring methods for liquid crystal modules - Transmissive type |
| IEC 61828-2006 | 超声波.聚焦传感器.发送场的定义和测量方法 | Ultrasonics - Focusing transducers - Definitions and measurement methods for the transmitted fields |
| IEC 61830-1997 | 微波铁氧体元件 主要性能的测量方法 | Microwave ferrite components - Measuring methods for major properties |
| IEC 61843-1997 | 旋磁器件产生的调制分量电平测量方法 | Measuring method for the level of intermodulation products generated in a gyromagnetic device |
| IEC 61855-2003 | 家用电动毛发护理用具.性能的测量方法 | Household electrical hair care appliances - Methods of measuring the performance |
| IEC 61988-2-1-2002 | 等离子体显示板.第2-1部分:光学测量方法 | Plasma display panels - Part 2-1: Measuring methods, Optical |
| IEC 61988-2-2-2003 | 等离子体显示板.第2-2部分:光电测量方法 | Plasma display panels - Part 2-2: Measuring methods; Optoelectrical |
| IEC 62007-2 Edition 2.0-2009 | 纤维光学系统用半导体光电器件.第2部分:测量方法 | Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods |
| IEC 62007-2-2009 | 光纤系统用半导体光电器件.第2部分:测量方法 | Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods |
| IEC 62018-2003 | 信息技术设备的功率消耗.测量方法 | Power consumption of information technology equipment - Measurement methods |
| IEC 62024-1 Corrigendum 1-2008 | 高频感应元件.电气特性和测量方法.第1部分:毫微亨利芯片感应器 | High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor corrigendum 1 |
| IEC 62024-1-2008 | 高频感应元件.电气特性和测量方法.第1部分:毫微亨利芯片感应器 | High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor |
| IEC 62024-2-2008 | 高频感应元件.电气特性和测量方法.第2部分:直流对直流变流器用感应器的额定电流 | High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converter |
| IEC 62025-1-2007 | 高频感应元件.非电气特性和测量方法.第1部分:电子和远程通信设备用固定式表面安装的感应器 | High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment |
| IEC 62025-2-2005 | 高频感应部件.非电气特性和测量方法.第2部分:非电气特性的试验方法 | High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics |
| IEC 62044-1-2002 | 软磁材料衬芯的测量方法.第1部分:总规范 | Cores made of soft magnetic materials - Measuring methods - Part 1: Generic specification |
| IEC 62044-2-2005 | 软磁材料制芯.测量方法.第2部分:在低激发能级下的电磁特性 | Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level |
| IEC 62044-3-2000 | 软磁性材料制成的磁芯.测量方法.第3部分:高冲击水平的磁化特性 | Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level |
| IEC 62087-2008 | 音频、视频和相关设备的功率消耗用测量方法 | Methods of measurement for the power consumption of audio, video and related equipment |
| IEC 62121-2001 | 微型盘录音机/重放机的测量方法 | Methods of measurement for minidisc recorders/players |
| IEC 62122-2002 | 消费者使用的数字VTRs的测量方法.电子和机械性能 | Methods of measurement for consumer-use digital VTRs - Electronic and mechanical performances |
| IEC 62233-2005 | 家用电器和类似用途器具有关人体辐射的电磁场测量方法 | Measurement methodes for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
| IEC 62272-2-2007 | 全球数字无线广播(DRM).第2部分:波段小于30MHz的无线广播.DRM发射机的测量方法 | Digital radio mondiale (DRM) - Part 2: Digital radio in the bands below 30 MHz - Methods of measurement for DRM transmitters |
| IEC 62273-1-2007 | 无线电发射机测量方法.第1部分:地面数字电视发射机的工作特性 | Methods of measurement for radio transmitters - Part 1: Performance characteristics of terrestrial digital television transmitters |
| IEC 62276-2005 | 表面声波装置用单晶薄片.规范和测量方法 | Single crystal wafers for surface acoustic wave (SAW) device application - Specifications and measuring methods |
| IEC 62333-2-2006 | 数字器件和设备用噪声抑制片.第2部分:测量方法 | Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods |
| IEC 62341-6-1-2009 | 有机发光二极管(OLED)显示器.第6-1部分:光学参数及光电学参数的测量方法 | Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters |
| IEC 62372-2006 | 核仪器.封装的闪烁器.光输出和固有分辨率测量方法 | Nuclear instrumentation - Housed scintillators - Measurement methods of light output and intrinsic resolution |
| IEC 62389-2005 | DVD播放机的测量方法 | Methods of measurement for DVD players |
| IEC 62431-2008 | 毫米波频中电磁波吸收器的反射率.测量方法 | Reflectivity of electromagnetic wave absorbers in millimetre wave frequency - Measurement methods |
| IEC 62489-1-2010 | 电声学.助听用音频电磁感应环路系统.第1部分:系统组件性能的具体说明及测量方法 | Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components |
| IEC/PAS 62437-2005 | 板式运载工具、船舶和设备上用的接收机保护用无线电干扰特性.限值和测量方法.有源天线规范 | Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement - Specification for active antennas |
| IEC/PAS 62587-2008 | 便携式家用电子房间空气净化器的性能测量方法 | Method for measuring performance of portable household electric room air cleaners |
| IEC/PAS 62593-2008 | 无线通信和广播系统中Mach-Zehnder光学调节器用半波长电压的测量方法 | Measurement method of a half-wavelength voltage for Mach-Zehnder optical modulator in wireless communication and broadcasting systems |
| IEC/TR 60440 Corrigendum 1-1974 | 电阻器非线性的测量方法 | Method of measurement of non-linearity in resistors |
| IEC/TR 60440-1973 | 电阻器非线性的测量方法 | Method of measurement of non-linearity in resistors |
| IEC/TR 60854-1986 | 超声脉冲回声诊断设备性能的测量方法 | Methods of measuring the performance of ultrasonic pulse-echo diagnostic equipment |
| IEC/TR 61088-1991 | 超声波压电陶瓷传感器的特性和测量方法 | Characteristics and measurements of ultrasonic piezoceramic transducers |
| IEC/TR 61340-2-2-2000 | 静电 第2-2部分:测量方法 充电率的测量 | Electrostatics - Part 2-2: Measurement methods; Measurement of chargeability |
| IEC/TR 61341-2010 | 反光灯的中心光束强度及波束角(s)的测量方法 | Method of measurement of centre beam intensity and beam angle(s) of reflector lamps |
| IEC/TR 61807-1999 | 升高温下硬磁材料的磁性能 测量方法 | Magnetic properties of magnetically hard materials at elevated temperatures - Methods of measurement |
| IEC/TR 62002-4-2009 | 移动和便携式DVB-T/H无线电通路.第4部分:手持波音终端的总辐射灵敏度用测量方法 | Mobile and portable DVB-T/H radio access - Part 4: Measurement methods for total radiated sensitivity in hand held broadcast terminals |
| IEC/TR 62221-2001 | 光纤.测量方法.微弯敏感性 | Optical fibres - Measurement methods - Microbending sensitivity |
| IEC/TR 62245-2002 | 光纤.测量方法.A3和A4型光纤的弯曲损耗 | Optical fibres - Measurement methods - Bend loss for A3 and A4 type fibres |
| IEC/TR2 60816-1984 | 低压电力线和信号线上短时瞬态的测量方法指南 | Guide on methods of measurement of short duration transients on low voltage power and signal lines. |
| IEC/TS 62312-1-1-2008 | 音频和视频同步指南.第1-1部分:音频和视频设备和系统同步的测量方法.总则 | Guideline for synchronization of audio and video - Part 1-1: Measurement methods for synchronization of audio and video equipment and systems - General |
| ISO 10012-2003 | 测量管理系统.测量方法和测量设备的要求 | Measurement management systems - Requirements for measurement processes and measuring equipment |
| ISO 10302-1996 | 声学 小型通风装置辐射空气噪声的测量方法 | Acoustics - Method for the measurement of airborne noise emitted by small air-moving devices |
| ISO 10494-1993 | 燃气轮机和燃气轮机组 气载噪音的测量 工程/测量方法 | Gas turbines and gas turbine sets; measurement of emitted airborne noise; engineering/survey method |
| ISO 11269-1-1993 | 土壤质量 污染物对土壤植物群影响的测定 第1部分:抑制根系生长的测量方法 | Soil quality; determination of the effects of pollutants on soil flora; part 1: method for the measurement of inhibition of root growth |
| ISO 11698-1-2000 | 缩微摄影技术 开窗卡扫描仪生成影像质量的测量方法 第1部分:测试影像的特性 | Micrographics - Methods of measuring image quality produced by aperture card scanners - Part 1: Characteristics of the test images |
| ISO 11698-2-2000 | 缩微摄影技术 开窗卡扫描仪生成影像质量的测量方法 第2部分:质量标准和控制 | Micrographics - Methods of measuring image quality produced by aperture card scanners - Part 2: Quality criteria and control |
| ISO 11929-6-2005 | 电离辐射测量探测限和判断阈的确定.第6部分:基本原则及对瞬态测量方法的应用 | Determination of the detection limit and decision threshold for ionizing radiation measurements - Part 6: Fundamentals and applications to measurements by use of transient mode |
| ISO 12124-2001 | 声学.助听器真耳声特性的测量方法 | Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids |
| ISO 12364-2001 | 两轮摩托车 防抱死系统（ABS） 试验和测量方法 | Two-wheeled motorcycles - Antilock braking systems (ABS) - Tests and measurement methods |
| ISO 12366-2001 | 两轮轻便摩托车 防抱死系统（ABS） 试验和测量方法 | Two-wheeled mopeds - Antilock braking systems (ABS) - Tests and measurement methods |
| ISO 12800-2003 | 核燃料技术.氧化铀粉末比表面积的BET测量方法指南 | Nuclear fuel technology - Guide to the measurement of the specific surface area of uranium oxide powders by the BET method |
| ISO 13328-2000 | 摩托车轮胎 轮胎滚动圆周长的测量方法 负载下的新轮胎 | Motorcycle tyres - Measurement of tyre rolling circumference - Loaded new tyres |
| ISO 13503-2 AMD 1-2009 | 石油和天然气工业.完井液和材料.第2部分:应用在水力压裂法和砂砾填充操作中的支撑物性能测量方法 | Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations - Amendment 1: Addition of Annex B: Proppant specification |
| ISO 13752-1998 | 空气质量 采用第二种方法作为参照的现场条件下测量方法的不确定度的评定 | Air quality - Assessment of uncertainty of a measurement method under field conditions using a second method as reference |
| ISO 13753-1998 | 机械振动与冲击 手臂振动 手臂系统为负载时弹性材料振动传递率的测量方法 | Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system |
| ISO 14242-2-2000 | 外科植入物.总的髋关节假肢的磨损.第2部分:测量方法 | Implants for surgery - Wear of total hip joint prostheses - Part 2: Methods of measurement |
| ISO 14243-2-2009 | 外科植入物.总的膝关节假肢的磨损.第2部分:测量方法 | Implants for surgery - Wear of total knee-joint prostheses - Part 2: Methods of measurement |
| ISO 14377-2002 | 罐装脱脂牛奶.锡含量测定.使用石墨炉原子吸收光谱测量方法 | Canned evaporated milk - Determination of tin content - Method using graphite furnace atomic absorption spectrometry |
| ISO 14524-2009 | 摄影.电子静态图像摄影机.光电转换功能(OECFs)测量方法 | Photography - Electronic still-picture cameras - Methods for measuring opto-electronic conversion functions (OECFs) |
| ISO 14695 Technical Corrigendum 1-2009 | 工业风扇.风扇振动的测量方法.技术勘误1 | Industrial fans - Method of measurement of fan vibration; Technical Corrigendum 1 |
| ISO 14695-2003 | 工业风机.风机振动的测量方法 | Industrial fans - Method of measurement of fan vibration |
| ISO 14853-2005 | 塑料.含水系统中塑料材料富氧菌生物降解性的测定.生物气产生的测量方法 | Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production |
| ISO 15242-1-2004 | 滚动轴承.振动测量方法.第1部分:基本原则 | Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals |
| ISO 15242-2 Technical Corrigendum 1-2010 | 滚动轴承.振动测量方法.第2部分:带圆柱芯和外表面的径向滚珠轴承.技术勘误表1 | Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface; Technical Corrigendum 1 |
| ISO 15242-2-2004 | 滚动轴承.振动测量方法.第2部分:带圆柱芯和外表面的径向滚珠轴承 | Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface |
| ISO 15242-3 Technical Corrigendum 1-2010 | 滚动轴承.振动测量方法.第3部分:带圆柱芯和外表面的径向球面和圆锥轴承.技术勘误表1 | Rolling bearings - Measuring methods for vibration - Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface; Technical Corrigendum 1 |
| ISO 15242-3-2006 | 滚动轴承.振动测量方法.第3部分:带圆柱芯和外表面的径向球面和圆锥轴承 | Rolling bearings - Measuring methods for vibration - Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface |
| ISO 15242-4-2007 | 滚动轴承.振动测量方法.第4部分:带有圆柱孔和外表面的径向滚动轴承 | Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface |
| ISO 15860-2006 | 航天系统.气体污染.现场试验测量方法 | Space systems - Gas contamination - Measurement methods for field tests |
| ISO 1607-1-1993 | 容积真空泵 性能测量方法 第1部分:体积流速(抽速)的测量 | Positive-displacement vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed) |
| ISO 1607-2-1989 | 容积真空泵 性能测量方法 第2部分:极限压力的测量 | Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure |
| ISO 17081-2004 | 氢渗透的测量方法和用电化学法测定金属中的氢吸收和迁移 | Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique |
| ISO 18164-2005 | 乘用车、卡车、公共汽车和摩托车轮胎.滚动阻力测量方法 | Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance |
| ISO 18233-2006 | 声学.建筑物和房间声学新测量方法的应用 | Acoustics - Application of new measurement methods in building and room acoustics |
| ISO 18909 Technical Corrigendum 1-2006 | 照相.冲洗的照相彩色胶片和相纸.影像稳定性测量方法.技术勘误1 | Photography - Processed photographic colour films and paper prints - Methods for measuring image stability; Technical Corrigendum 1 |
| ISO 21727-2004 | 摄影.电影音频材料的感觉级音量的测量方法 | Cinematography - Method of measurement of perceived loudness of motion-picture audio material |
| ISO 22234-2005 | 电影摄影.电影多路声道系统的相对和绝对声压级.适用于模拟照相软片声音、数字照相软片声音和数字影院声音的 | Cinematography - Relative and absolute sound pressure levels for motion-picture multi-channel sound systems - Measurement methods and levels applicable to analog photographic film audio, digital photographic film audio and D-cinema audio |
| ISO 22856-2008 | 植保设备.喷雾漂移的实验室测量方法.风洞 | Equipment for crop protection - Methods for the laboratory measurement of spray drift - Wind tunnels |
| ISO 22866-2005 | 农作物保护设备.喷雾漂移的现场测量方法 | Equipment for crop protection - Methods for field measurement of spray drift |
| ISO 25178-6-2010 | 产品的几何技术规范(GPS).表面纹理:表面的.第6部分:表面纹理测量方法的分类 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture |
| ISO 3822-1 AMD 1-2008 | 声学.用于供水设施的装置和设备发出噪音的实验室试验.第1部分:测量方法.修改件1:不确定性测量 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement; Amendment 1: Measurement uncertainty |
| ISO 3822-1-1999 | 声学 供水设施的装置和设备发射的噪声的实验室测试 第1部分:测量方法 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement |
| ISO 3882-2003 | 金属和其他无机物覆层.厚度测量方法述评 | Metallic and other inorganic coatings - Review of methods of measurement of thickness |
| ISO 3929-2003 | 道路车辆.在检验或维修过程中废气排放量的测量方法 | Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance |
| ISO 4463-1-1989 | 建筑物的测量方法 定线和测量 第1部分:计划和组织、测量程序、验收标准 | Measurement methods for building; setting-out and measurement; part 1: planning and organization, measuring procedures, acceptance criteria |
| ISO 4463-2-1995 | 建筑物的测量方法 定线和测量 第2部分:测站和目标 | Measurement methods for building - Setting-out and measurement - Part 2: Measuring stations and targets |
| ISO 4463-3-1995 | 建筑物的测量方法 定线和测量 第3部分:观测和测量作业所获资料的检查目录 | Measurement methods for building - Setting-out and measurement - Part 3: Check-lists for the procurement of surveys and measurement services |
| ISO 4475-1989 | 针叶树和阔叶树锯材原木 可见缺陷 测量方法 | Coniferous and broadleaved tree sawlogs; visible defects; measurement |
| ISO 4671-2007 | 橡胶和塑料软管及软管组件.软管尺寸和软管组件长度的测量方法 | Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
| ISO 5007-2003 | 农用轮式拖拉机.驾驶员的座位.传动振动的实验室测量方法 | Agricultural wheeled tractors - Operator's seat - Laboratory measurement of transmitted vibration |
| ISO 5725-5 Technical Corrigendum 1-2005 | 测量方法和结果的准确度(正确性和精密度).第5部分:确定标准测试方法的精密度的可替代方法.技术勘误1 | Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method; Technical Corrigendum 1 |
| ISO 5884-1987 | 航空航天 流体系统和组件 液压油液固体颗粒污染的系统取样和测量方法 | Aerospace; Fluid systems and components; Methods for system sampling and measuring the solid particle contamination of hydraulic fluids |
| ISO 6015-2006 | 土方机械.液压挖掘机和反铲装载机.挖掘力的测量方法 | Earth-moving machinery - Hydraulic excavators and backhoe loaders - Methods of determining tool forces |
| ISO 6016-2008 | 土方机械.整个机器及其设备和部件的质量测量方法 | Earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components |
| ISO 6342-2003 | 缩微摄影技术.开窗卡.增厚区厚度的测量方法 | Micrographics - Aperture cards - Method of measuring thickness of buildup area |
| ISO 6442-2005 | 门扇.一般和局部平整度.测量方法 | Door leaves - General and local flatness - Measurement method |
| ISO 6460-1-2007 | 摩托车.废气排放和燃料消耗测量方法.第1部分:一般试验要求 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements |
| ISO 6460-2-2007 | 摩托车.废气排放和燃料消耗的测量方法.第2部分:试验循环和特殊试验条件 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions |
| ISO 6460-3-2007 | 摩托车.废气排放和燃料消耗的测量方法.第3部分:恒速下的燃料消耗测量 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed |
| ISO 6591-1-1984 | 包装 袋 说明及测量方法 第1部分:空纸袋 | Packaging; Sacks; Description and method of measurement; Part 1 : Empty paper sacks |
| ISO 6591-2-1985 | 包装 袋 说明及测量方法 第2部分:热塑柔性薄膜空袋 | Packaging; Sacks; Description and method of measurement; Part 2 : Empty sacks made from thermoplastic flexible film |
| ISO 6855-1983 | 道路车辆 装有控制点火发动机装置的机动自行车排出气体污染物的测量方法 | Road vehicles; Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine |
| ISO 7077-1981 | 建筑物的测量方法 确定尺度配合的一般原则和步骤 | Measuring methods for building; General principles and procedures for the verification of dimensional compliance |
| ISO 7117-2010 | 摩托车.最大速度的测定用测量方法 | Motorcycles - Measurement method for determining maximum speed |
| ISO 7140-1985 | 越野雪橇 动态性能的测定 实验室测量方法 | Cross-country skis; Determination of dynamic performance; Laboratory measurement method |
| ISO 737-1975 | 针叶树锯材 尺寸 测量方法 | Coniferous sawn timber; Sizes; Methods of measurement |
| ISO 7935-1992 | 固定源排放 二氧化硫质量浓度的测定 自动测量方法性能特征 | Stationary source emissions; determination of the mass concentration of sulfur dioxide; performance characteristics of automated measuring methods |
| ISO 7976-1-1989 | 建筑公差 建筑物和建筑制品的测量方法 第1部分:方法和仪器 | Tolerances for building; methods of measurement of buldings and building products; part 1: methods and instruments |
| ISO 7976-2-1989 | 建筑公差 建筑物和建筑制品的测量方法 第2部分:测点的位置 | Tolerances for building; methods of measurement of buildings and building products; part 2: position of measuring points |
| ISO 8116-8-1995 | 纺织机械与附件 经轴 第8部分:跳动公差的定义和测量方法 | Textile machinery and accessories - Beams for winding - Part 8: Definitions of run-out tolerances and methods of measurement |
| ISO 8178-3-1994 | 往复式内燃机 排放测量 第3部分:稳态工况排气烟度的定义及测量方法 | Reciprocating internal combustion engines - Exhaust emission measurement - Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions |
| ISO 8401-1986 | 金属覆盖层 延展性的测量方法述评 | Metallic coatings; Review of methods of measurement of ductility |
| ISO 8687-1987 | 电影 超8mm、16mm和35mm变积式光学声迹的信噪比 测量方法 | Cinematography; Signal-to-noise ratio of 8 mm Type S, 16 mm and 35 mm variable-area photographic sound records; Method of measurement |
| ISO 8705-2005 | 机动脚踏两用车.重心位置的测量方法 | Mopeds - Measurement method for location of centre of gravity |
| ISO 8709 Technical Corrigendum 1-1998 | 轻便摩托车 制动器和制动装置 试验和测量方法 技术勘误1 | Mopeds - Brakes and braking devices - Tests and measurement methods; Technical Corrigendum 1 |
| ISO 8709-1995 | 轻便摩托车 制动器和制动装置 试验和测量方法 | Mopeds - Brakes and braking devices - Tests and measurement methods |
| ISO 8710-1995 | 摩托车 制动器和制动装置 试验及测量方法 | Motorcycles - Brakes and braking devices - Tests and measurement methods |
| ISO 8904-1990 | 阔叶树锯材 尺寸 测量方法 | Broadleaved sawn timber; sizes; methods of measurement |
| ISO 9043-2008 | 摩托车和机动自行车.惯性矩的测量方法 | Mopeds - Measurement method for moments of inertia |
| ISO 9129-2008 | 摩托车.惯性矩的测量方法 | Motorcycles - Measurement methods for moments of inertia |
| ISO 9130-2005 | 摩托车.重心位置的测量方法 | Motorcycles - Measurement method for location of centre of gravity |
| ISO 9358-1994 | 光学和光学仪器 成像系统杂散光 定义及测量方法 | Optics and optical instruments - Veiling glare of image-forming systems - Definitions and methods of measurement |
| ISO/IEC 10561-1999 | 信息技术 办公设备 打印设备 吞吐量测量方法 1类和2类打印机 | Information technology - Office equipment - Printing devices - Method for measuring throughput - Class 1 and class 2 printers |
| ISO/IEC 14143-2-2002 | 信息技术.软件度量.功能大小度量.第2部分:依据ISO/IEC 14143-1:1998的软件尺寸测量方法的合格评定 | Information technology - Software measurement; Functional size measurement - Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1:1998 |
| ISO/IEC 14545-1998 | 信息技术 办公设备 复印机有效印速率的测量方法 | Information technology - Office equipment - Method for measuring copying machine productivity |
| ISO/IEC 19761-2003 | 软件工程.COSMIC-FFP.函数长度测量方法 | Software engineering - COSMIC-FFP - A functional size measurement method |
| ISO/IEC 19799-2007 | 信息技术.已印刷页面上光泽一致性的测量方法 | Information technology - Method of measuring gloss uniformity on printed pages |
| ISO/IEC 24734-2009 | 信息技术.办公设备.数字印刷能力的测量方法 | Information technology - Office equipment - Method for measuring digital printing productivity |
| ISO/IEC 24735-2009 | 信息技术.办公设备.数字复印能力的测量方法 | Information technology - Office equipment - Method for measuring digital copying productivity |
| ISO/IEC 29881-2008 | 信息技术.软件和系统工程.FiSMA 1.1功能尺寸测量方法 | Information technology - Software and systems engineering - FiSMA 1.1 functional size measurement method |
| ISO/IEC TR 14143-3-2003 | 信息技术.软件测量.功能尺寸测量.第3部分:功能尺寸测量方法的鉴定 | Information technology - Software measurement; Functional size measurement - Part 3: Verification of functional size measurement methods |
| ISO/PAS 12158-2002 | 道路车辆.制动系统.温度的测量方法 | Road vehicles - Braking systems - Temperature mesuring methods |
| ISO/TR 10064-6-2009 | 检验实施规程.第6部分:斜齿轮测量方法 | Code of inspection practice - Part 6: Bevel gear measurement methods |
| ISO/TR 22971-2005 | 测量方法和结果的准确性(真实性和精确性).设计、执行和统计分析实验室间可重复性和再现性结果中使用ISO 572 | Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
| ISO/TR 27609-2007 | 手持工具的振动.研磨机振动测量方法.系列试验评估 | Vibration in hand-held tools — Vibrationmeasurement methods for grinders —Evaluation of round-robin test |
| ISO/TR 9212-2006 | 液体比重测定法.明渠水流测量.水流细沙测量方法 | Hydrometry - Measurement of liquid flow in open channels - Methods of measurement of bedload discharge |
| 编号 | 中文名称 | 英文名称 |