| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 18005-1-2002 | 城镇规划的噪声控制.第1部分:规划的基本原则和指导 | Noise abatement in town planning - Part 1: Fundamentals and directions for planning |
| DIN 25475-1-2004 | 核设施.操作监控.第1部分:松动部件检测用结构噪声监测 | Nuclear facilities - Operational monitoring - Part 1: Monitoring of structure-borne sound for loose parts detection |
| DIN 44402-19-1973 | 电子管电气性能测量.第19部分:由于机械或声激励引起的噪声测量 | Measurement of the electrical properties of electronic tubes; measurement of noises due to mechanical or acoustic excitations |
| DIN 44402-6-1972 | 电子管电气性能测试.第6部分:噪声系数的测量方法 | Measurement of the electrical properties of electronic tubes and valves; methods of measuring noise factor |
| DIN 44402-8-1973 | 电子管电气性能测量.第8部分:当量噪声电阻的测量 | Measurements of the electrical properties of electronic tubes; measurement of equivalent noise resistance |
| DIN 44899-6-1986 | 电热水器.额定容量为1000升以内.低噪声水平设计的要求 | Electrical water heaters; rated capacity up to 1000 litres; requirements for low-noice level design |
| DIN 45405-1983 | 音响系统中的噪声级测量 | Noise level measurement in sound systems |
| DIN 45635 Bb.1-1979 | 机器发出噪声的测量.空气中噪声测量.包面法.包面法试验（试验记录）报告表 | Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Test report (test record) form for enveloping surface method |
| DIN 45635-1-1984 | 机器噪声测量.空气载声测量.包面法.分成３级精度的基本测量法 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; basic method, divided into 3 grades of accuracy |
| DIN 45635-11-1987 | 机器空气噪声的测量.空气噪声测量.包络面法.内燃机 | Measurement of noise emitted by machines; airborne noise emission, enveloping surface method; internal combustion engines |
| DIN 45635-12-1978 | 机器空气噪声的测量.空气噪声测量.包络面法.电气开关装置和控制装置 | Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Electrical switchgear and control gear |
| DIN 45635-14-1980 | 机器噪声的测量.空气噪声测量.包络面法.空气冷热交换器（空气冷却器） | Noise Measurement on Machines; Airborne Noise Measurement, Enveloping Surface Method, Air-cooled Heat Exchangers (Air Coolers) |
| DIN 45635-15-1987 | 机器空气噪声的测量.包络面法.热电站用的涡轮发电机组 | Measurement of airborne noise emitted by machines; enveloping surface method; turbogenerator sets for use in thermal power stations |
| DIN 45635-16-1978 | 机器排放的空气传播噪声的测量.第16部分:包洛面法.机床 | Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method, Machine Tools |
| DIN 45635-1601-1978 | 机器空气噪声的测量.包络面法.金属加工机床、特殊工具、车床的规定 | Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine, Tools Special, Stipulations for Lathes |
| DIN 45635-1602-1978 | 机器排放的空气传播噪声的测量.第1602部分:包洛面法.金属加工机床.落锻锤的特殊规定 | Measurement of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine Tools; Special Stipulations for Drop Forging Hammers |
| DIN 45635-1603-1978 | 机器排放的空气传播噪声的测量.第1603部分:包洛面法.金属加工机床.通用压力机的特殊规定 | Measurements of Airborne Noise Emitted by Machines; Enveloping Surface Method; Metal Processing Machine Tools; Special Stipulations for Universal Presses |
| DIN 45635-1605-1981 | 机器空气噪声的测量.包络面法.金属加工机床.铣床 | Measurement of airborne noise emitted by machines; enveloping surface method; metal working machines; milling machines |
| DIN 45635-1606-1984 | 机器空气噪声的测量.包络面法.金属加工机床.钻床 | Measurement of airborne noise emitted by machines; enveloping surface method; metal working machines, drilling machines |
| DIN 45635-1607-1984 | 机器空气噪声的测量.包络面法.金属加工机床.滚齿机的特殊规定 | Measurement of airborne noise emitted by machines; enveloping surface method; metal working machines, gear hobbing machines |
| DIN 45635-1609-1984 | 机器排放的空气传播噪声测量.包络面法.金属加工机床.圆形锯床 | Measurement of airborne noise emitted by machines; enveloping surface method; metal working machines, circular sawing machines |
| DIN 45635-1610-1984 | 机器空气噪声的测量.包络面法.金属加工机床.磨床的特殊规定 | Measurement of airborne noise emitted by machines; enveloping surface method; metal working machines grinding machines |
| DIN 45635-1650-1978 | 机器排放的空气传播噪声的测量.第1650部分:包洛面法.木材加工机床.刨床 | Measurement of airborne noise emitted by machines; enveloping surface method, woodworking machines, planing machines |
| DIN 45635-1651-1990 | 机器空气噪声的测量.包络面法.木工机床.台式单锯片圆盘锯的特殊规定 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; single blade circular saw benches |
| DIN 45635-1652-1978 | 机器排放的空气传播噪声的测量.第1652部分:包洛面法.单面造型机木材加工机床 | Measurement of airborne noise emitted by machines; enveloping surface method, woodworking machines, one side moulding machines |
| DIN 45635-1653-1982 | 机器空气噪声的测量.空气噪声测量.包络面法.木工机床.双头刨床的特殊规定 | Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for double end shaping machines |
| DIN 45635-1654-1982 | 机器空气噪声的测量.空气噪声测量.包面法.木工机床.多工部边条机和线脚机的特殊规定 | Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for multistage edge lipping and banding machines |
| DIN 45635-1655-1982 | 机器空气噪声的测量.空气噪声测量.包络面法.木工机床.最终修整机、边角加工机和镶边机的特殊规定 | Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for final trimming machines and edge lipping and banding machines |
| DIN 45635-1656-1982 | 机器空气噪声的测量.空气噪声测量.包络面法.木工机床.双面及多面刨铣床的特殊规定 | Measurement of noise emitted by machines; Airborne noise measurement, enveloping surface method; Woodworking machines; Special specifications for two-side and multi-side planing and milling machine |
| DIN 45635-1657-1983 | 机器空气噪声的测量.包络面法.木工机床.双定尺圆锯床的特殊规定 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double dimensions circular sawing machines |
| DIN 45635-1658-1986 | 机器排放的空气传播噪声的测量.第1658部分:包洛面法.横切单冲程圆锯木材加工机床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; single blade stroke circular sawing machines for cross-cutting |
| DIN 45635-1659-1986 | 机器排放的空气传播噪声的测量.第1659部分:包洛面法.板材成形机木材加工机床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; panel sizing machines |
| DIN 45635-1660-1986 | 机器排放的空气传播噪声的测量.第1660部分:包洛面法.造模铣切机木材加工机床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; routing machines |
| DIN 45635-1661-1986 | 机器排放的空气传播噪声的测量.第1661部分:包洛面法.台式带锯木材加工机床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; table band sawing machines |
| DIN 45635-1662-1986 | 机器排放的空气传播噪声的测量.第1662部分:包洛面法.多轴单端开榫机木材加工机床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; single-end tenoning machines with several spindles |
| DIN 45635-1663-1987 | 机器排放的空气传播噪声的测量.第1663部分:包洛面法.木材加工机床打磨机 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines sanding machines |
| DIN 45635-1664-1987 | 机器排放的空气传播噪声的测量.第1664部分:包洛面法.木材加工机床.多锯条圆形锯床 | Measurement of airborne noise emitted by maschines; enveloping surface method; woodworking machines; multi-blade circular sawing machines |
| DIN 45635-1665-1988 | 机器空气噪声的测量.包络面法.木工机床.双头开榫机 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double end tenoning machines |
| DIN 45635-1666-1988 | 机器空气噪声的测量.包络面法.木工机床.粗切割用双刃圆锯床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double edging circular sawing machines for rough cutting |
| DIN 45635-1667-1988 | 机器空气噪声的测量.包络面法.木工机床.锯片双向行程横向锯切环形锯床 | Measurement of airborne noise emitted by machines; enveloping surface method; woodworking machines; double blade stroke circular sawing machines for cross cutting |
| DIN 45635-22-1985 | 机器空气噪声的测量.空气噪声传播.包络面法.照明弹 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; flares |
| DIN 45635-23-2003 | 机器噪声测量.空气噪声发射包络面法.第23部分:齿轮传动 | Measurement of noise emitted by machines - Airborne noise emission enveloping surface method - Part 23: Gear transmisson |
| DIN 45635-25-1980 | 机器排放的空气传播噪声的测量.第25部分:包洛面法.气焊及等离子焊喷嘴和机器 | Measurement of airborne noise emitted by machines; enveloping surface method, oxy-fuel gas and plasma torches and machines |
| DIN 45635-26-1979 | 机器空气噪声的测量.包络面法.液压泵 | Measurement of airborne noise emitted by machines; enveloping surface method, hydraulic pumps |
| DIN 45635-28-1980 | 机器空气噪声的测量.包络面法.包装和类似机器 | Measurement of airborne noise emitted by machines; enveloping surface method; packaging and allied machinery |
| DIN 45635-29-1980 | 机器空气噪声的测量.包络面法.食品、饮料和类似机器 | Measurement of airborne noise emitted by machines; enveloping surface method; food, drink and allied machinery |
| DIN 45635-31 Bb.1-1984 | 机器空气噪声的测量.包络面法.测量报告表.粉碎机 | Measurement of airborne noise emitted by machines; enveloping surface method; form for measurement report, comminuting machines |
| DIN 45635-31-1980 | 机器排放的空气传播噪声的测量.第31部分:包洛面法.粉碎机 | Measurement of airborne noise emitted by machines; enveloping surface method, comminuting machines |
| DIN 45635-33-1979 | 机器空气噪声的测量.包络面法.建筑设备 | Measurement of airborne noise emitted by machines; enveloping surface method, construction equipment |
| DIN 45635-34-1984 | 机器排放的空气传播噪声的测量.第34部分:包洛面法.卡盘操作式装配工具 | Measurement of airborne noise emitted by machines; enveloping surface method; cartridge-operated fixing tools |
| DIN 45635-35-1986 | 机器噪声测量.空气载声测量.包面法.带电动压缩机的热泵 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; heat pump units with electrically driven compressors |
| DIN 45635-37-1980 | 机器空气噪声的测量.包络面法.塑料和橡胶加工机器 | Measurement of airborne noise emitted by machines; enveloping surface method; machinery for the processing of plastic and rubber |
| DIN 45635-38-1986 | 机器排放的噪声测量.空气传播的噪声.第38部分:包洛面法、混响室法及通道法.排风扇 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method, reverberation room method and in-duct method; fans |
| DIN 45635-40-1987 | 机器空气噪声的测量.空气噪声测量.包络面法.水力发电站机组和水泵设备 | Measurement of airborne noise emitted by machines; enveloping surface method; machine sets in hydroelectric power stations and water pumping plants |
| DIN 45635-41 Bb.1-1986 | 机器排放的噪声测量.空气传播的噪声.第41 Bb.1部分:包洛面法.液压组件(试验报告样表) | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies (test report specimen form) |
| DIN 45635-41-1986 | 机器排放的噪声测量.空气传播的噪声.第41部分:包洛面法.液压组件 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; hydraulic assemblies |
| DIN 45635-45-1988 | 机器排放的空气传播噪声的测量.第45部分:包洛面法.连续输送机 | Measurement of airborne noise emitted by machines; enveloping surface method; continuous handling equipment |
| DIN 45635-46-1985 | 机器空气噪声的测量.空气噪声传播.包络面法.冷却塔 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; cooling towers |
| DIN 45635-47-1985 | 机器空气噪声的测量.空气噪声传播.包络面法.烟囱 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; chimneys |
| DIN 45635-50-1987 | 机器空气噪声的测量.空气噪声测量.包络面法.阀门 | Measurement of noise emitted by machines; airborne noise measurement, enveloping surface method; valves |
| DIN 45635-51-1988 | 机器空气噪声的测量.包络面法.电影摄影机 | Measurement of airborne noise emitted by machines; enveloping surface method; motion picture cameras |
| DIN 45635-52-1986 | 机器排放的空气传播噪声的测量.第52部分:包洛面法.矿山柴油机车和矿山轨道车 | Measurement of airborne noise emitted by machines; enveloping surface method; mine diesel locomotives and mine road railers |
| DIN 45635-53-1986 | 机器排放的空气传播噪声的测量.第53部分:包洛面法.柴油牵引车 | Measurement of airborne noise emitted by machines; enveloping surface method; diesel traction trolleys |
| DIN 45635-54-1986 | 机器排放的空气传播噪声的测量.第54部分:包洛面法.矿山无轨车辆 | Measurement of airborne noise emitted by machines; enveloping surface method; mine trackless vehicles |
| DIN 45635-55-1986 | 机器排放的空气传播噪声的测量.第55部分:包洛面法.磨擦轮和/或齿轮传动调轨车 | Measurement of airborne noise emitted by machines; enveloping surface method; shunting trolleys with friction-wheel and/or gearwheel drive |
| DIN 45635-56-1986 | 机器排放的噪声测量.空气传播的噪声.第56部分:包洛面法和通道法.风扇辅助热风发生器、风扇辅助空气加热器和 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method and in-duct method; fan-assisted warm air generators, fan-assisted air heaters and fan units of air handling devices |
| DIN 45635-57-1986 | 机器排放的噪声测量.空气传播的噪声.第57部分:包洛面法.外侧马达 | Measurement of noise emitted by machines; airborne noise emission; enveloping surface method; outboard motors |
| DIN 45635-60-1989 | 机器排放的空气传播噪声的测量.第60部分:包洛面法.静止图象和动态图象放映机 | Measurement of airborne noise emitted by machines; enveloping surface method; still picture and motion-picture projectors |
| DIN 45635-61-1990 | 机器噪音测量.气载噪声测量.包面法.起重机 | Measurement of airborne noise emitted by machines; enveloping surface method; cranes |
| DIN 45635-62-1989 | 机器排放的空气传播噪声的测量.第62部分:包洛面法.混凝土砖块、板条、管道和预制件生产用机器和设备 | Measurement of airborne noise emitted by machines; enveloping surface method; machines and equipment for the manufacture of concrete blocks, slabs, pipes and prefabricated elements |
| DIN 45635-8-1985 | 机器空气噪声的测量.结构噪声的测量.基本要求 | Determination of airborne noise emitted by machines by, measurement of structure borne noise; basic requirements |
| DIN 45640-2-1993 | 内河和码头船舶发出的噪声.测定声功率级的包络面法 | Noise emitted by vessels on inland water-ways and harbours; enveloping surface method for the determination of the sound power level |
| DIN 45643-2011 | 飞机噪声的测量和评定.德文和英文文本 | Measurement and assessment of aircraft sound; Text in German and English |
| DIN 45645-1-1996 | 从测量数据中算出额定声级.邻近区域发出的噪声 | Determination of rating levels from measurement data - Part 1: Noise immission in the neighbourhood |
| DIN 45681 Berichtigung 2-2006 | 声学.噪声音调组成测定和噪声辐射评定用音调调整测定.对CD的DIN 45681:2005-03的勘误 | Acoustics - Determination of tonal components of noise and determination of a tone adjustment for the assessment of noise immissions, Corrigenda to DIN 45681:2005-03, with CD |
| DIN 45681-2005 | 声学.噪声音调组成测定和噪声辐射评定用音调调整测定 | Acoustics - Determination of tonal components of noise and determination of a tone adjustment for the assessment of noise immissions |
| DIN 45684-1-2006 | 声学.飞机场飞机发射噪声的测定.第1部分:计算方法 | Acoustics - Determination of aircraft noise exposure at airfields - Part 1: Calculation method |
| DIN 45684-2-2007 | 声学.飞机场飞机发射噪声的测定.第2部分:声学和飞机操作参数的测定 | Acoustics - Determination of aircraft noise exposure at airfields - Part 2: Determination of acoustic and aircraft operational parameters |
| DIN 45688-2005 | 排放控制区噪声和振动检验的实验室的能力的特定要求 | Specific requirements for the competence of testing laboratories for noise and vibration in the field of immission control |
| DIN 52210-6-1989 | 建筑物声学检验.气载噪声和隔音.第6部分:噪声级差测量 | Testing of acoustics in buildings; airborne impact and sound insulation; measurement of level difference |
| DIN 52221-2006 | 建筑声学试验.建筑物内技术装备产生的结构噪声的测量 | Tests in building acoustics - Measurements of structure-borne sound produced by technical appliances in buildings |
| DIN 5426-1-1995 | 滚动轴承.滚动轴承的振动噪声.第1部分:结构载振动噪声的测量方法 | Rolling bearings - Rolling bearing vibration and noise - Part 1: Methods for measurement of structure-borne noise |
| DIN CEN/TS 1793-4-2004 | 道路交通噪声降低装置.声学性能测定的试验方法.第4部分:固有特征.声音衍射的现场测定值 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In-situ values of sound diffraction; German version CEN/TS 1793-4:2003 |
| DIN CEN/TS 1793-5-2003 | 道路交通减噪装置.声音性能测试方法.第5部分:内在特性.声音反射和气载噪声隔绝现场测定值 | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics; In situ values of sound reflection and airborne sound insulation; German version CEN/TS 1793-5:2003 |
| DIN EN 12053-2009 | 工业卡车的安全.噪声辐射测量的试验方法(包括修改件A1:2008),DIN EN 12053:2009-07的英文版本 | Safety of industrial trucks - Test methods for measuring noise emissions (includes Amendment A1:2008); English version of DIN EN 12053:2009-07 |
| DIN EN 12102-2008 | 空间加热和制冷用带电力驱动压缩机的空调、液体冷却组件、热泵和减湿器.空气噪声的测量.声功率级的测定 | Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level; English version of DIN EN 12102:2008-09 |
| DIN EN 1265-2009 | 机械安全性.铸造机械和设备用噪声试验规范(包括修改件A1-2008).英文版本DIN EN 1265-2009-07 | Safety of machinery - Noise test code for foundry machines and equipment (includes Amendment A1:2008); English version of DIN EN 1265:2009-07 |
| DIN EN 12736-2003 | 电力推动道路车辆.运载工具上充电器充电过程中车辆发出的空气噪声.声功率级测定 | Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level; German version EN 12736:2001 |
| DIN EN 13023-2010 | 印刷、纸张加工、造纸机与设备的噪声测量方法.准确度等级2和3.德文版本EN 13023-2003+A1-2010 | Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3; German version EN 13023:2003+A1:2010 |
| DIN EN 14366-2005 | 废水装置发出噪声的实验室测量 | Laboratory measurement of noise from waste water installations; German version EN 14366:2004 |
| DIN EN 14462-2010 | 表面处理设备. 包括其辅助操作装置在内的表面处理设备的噪声试验规程. 精度等级2和3; 德文版本EN 14462: 2 | Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3; German version EN 14462:2005+A1:2009 |
| DIN EN 1501-4-2008 | 垃圾收集车及其相关提升装置.一般要求和安全性要求.第4部分:垃圾收集车的噪声试验规范 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles; English version of DIN EN 1501-4:2008-01 |
| DIN EN 15036-1-2006 | 加热锅炉.热产生器产生空气噪声的试验规则.第1部分:热产生器产生的空气噪声 | Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators; English version of DIN EN 15036-1:2006-12 |
| DIN EN 15036-2-2006 | 加热锅炉.热产生器空气噪声发射的试验规则.第2部分:热产生器出口发出的燃气噪声 | Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator; English version of DIN EN 15036-2:2006-12 |
| DIN EN 15610-2009 | 铁路应用.噪声排放.关于转动噪声产生的轨道粗糙度测量,DIN EN 15610:2009-08的英文版本 | Railway applications - Noise emission - Rail roughness measurement related to rolling noise generation; English version of DIN EN 15610:2009-08 |
| DIN EN 27574-1-1989 | 声学.测定和检验机器和设备规定噪声排放值的统计方法.第1部分:一般考虑和定义:(等同采用 ISO 7574-1:1985); | Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 1: general considerations and definitions; (identical with ISO 7574-1:1985); german version EN 27574-1:1988 |
| DIN EN 27574-2-1989 | 声学.测定和检验机器和设备规定噪声排放值的统计方法.第2部分:单机规定值方法:(等同采用 ISO 7574-2:1985); | Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 2: methods for stated values for individual machines; (identical with ISO 7574-2:1985); german version EN 27574-2:1988 |
| DIN EN 27574-3-1989 | 声学.测定和检验机器和设备规定噪声排放值的统计方法.第3部分:批量机器规定的简易(过渡)方法:(等同采用 ISO | Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 3: simple (transition) method for stated values for batches of machines; (identical with ISO 7574-3:1985); german version EN 27574-3:1988 |
| DIN EN 27574-4-1989 | 声学.测定和检验机器和设备规定噪声排放值的统计方法.第4部分:批量机器规定的简易:(等同采用 ISO 7574-4:19 | Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 4: methods for stated values for batches of machines; (identical with ISO 7574-4:1985); german version EN 27574-4:1988 |
| DIN EN 28960-1993 | 家用和类似用途冰箱、冷冻食品储藏柜和食品冷冻柜.空气噪声测量 | Refrigerators, frozen food storage cabinets and food freezers for household and similar use; measurement of emission of airborne acoustical noise (ISO 8960:1991); German version EN 28960:1993 |
| DIN EN 29295-1991 | 声学.计算机及商务设备发出的高频率噪声的测量(ISO 9295-89) | Acoustics; measurement of high-frequency noise emitted by computer and business equipment (ISO 9295:1989); german version EN 29295:1991 |
| DIN EN 301247-2003 | 数字蜂窝式电信系统(相位2).增强全速率语音通信信道的适度噪声状况 | Digital cellular telecommunications system (Phase 2) - Comfort noise aspects for Enhanced Full Rate (EFR) speech traffic channels (GSM 06.62 version 4.0.1) (Endorsement of the English version EN 301247 V 4.0.1 (1997-12) as German standard) |
| DIN EN 301705-2004 | 数字蜂窝式远程通信系统(2+相位).自适应多速率(AMR)语音话务信道用丢失帧的替换和噪声抑制 | Digital cellular telecommunications system (Phase 2+) - Substitution and muting of lost frames for Adaptive Multi Rate (AMR) speech traffic channels (GSM 06.91 version 7.1.1 Release 1998) (Endorsement of the English version EN 301705 V7.1.1 (2000-04) as German standard) |
| DIN EN 60034-9 Berichtigung 1-2008 | 旋转电机.第9部分:噪声极限(IEC 60034-9-2003、修改件 + A1-2007).勘误表DIN EN 60034-9(VDE 0530-9)-2008- | Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003, modified + A1:2007); German version EN 60034-9:2005 + A1:2007, Corrigenda to DIN EN 60034-9 (VDE 0530-9):2008-01 |
| DIN EN 60034-9-2008 | 旋转电机.第9部分:噪声极限值 | Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003, modified + A1:2007); German version EN 60034-9:2005 + A1:2007 |
| DIN EN 60534-8-1-2006 | 工业过程控制阀.第8-1部分:噪声的考虑.气动流流经控制阀产生的噪声的实验室测量 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves (IEC 60534-8-1:2005); German version EN 60534-8-1:2005 |
| DIN EN 60534-8-2-1994 | 工业过程控制阀.第8部分:噪声.第2节:控制阀液流噪声的实验室测量 | Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991); German version EN 60534-8-2:1993 |
| DIN EN 60534-8-3-2001 | 工业过程控制阀.第8-3部分:噪声.控制阀气动噪声预测法 | Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000); German version EN 60534-8-3:2000 |
| DIN EN 60534-8-4-2006 | 工业过程控制阀.第8-4部分:噪声考虑.气流噪声预测 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:2005 + Corrigendum 1:2006); German version EN 60534-8-4:2005 |
| DIN EN 60704-2-10-2005 | 家用和类似用途电器.测定空中传播噪声的试验规范.第2-10部分:电炉灶、烤炉、炉架和微波炉及其任意组合的特 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these (IEC 60704-2-10:2004); German version EN 60704-2-10:2004 |
| DIN EN 60704-2-11-2000 | 家用和类似电气装置.测定空气噪声的试验规范.第2-11部分:电动食品加工机的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically operated food preparation appliances (IEC 60704-2-11:1998); German version EN 60704-2-11:1999 |
| DIN EN 60704-2-3-2006 | 家用和类似用途电器.测定空中传播的噪声的试验规程.第2-3部分:洗碗机的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers (IEC 60704-2-3:2001 + A1:2005); German version EN 60704-2-3:2002 + A1:2005 |
| DIN EN 60704-2-4-2002 | 家用和类似用途电器.空中传播噪声测定的试验规程.第2-4部分:洗衣机和离心式脱水机的特殊要求 (IEC 60704-2- | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors (IEC 60704-2-4:2001); German version EN 60704-2-4:2001 |
| DIN EN 60704-2-5-2006 | 家用和类似电器气.测定空气传播噪声的试验规程.第2-5部分:储热式房间电加热器的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: Particular requirements for electric thermal storage room heaters (IEC 60704-2-5:2005); German version EN 60704-2-5:2005 |
| DIN EN 60704-2-6-2004 | 家用和类似用途的电器.空中传播噪声测定的试验规范.第2-6部分:滚筒式干衣机的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers (IEC 60704-2-6:2003, modified); German version EN 60704-2-6:2004 |
| DIN EN 60704-2-7-2000 | 家用及类似用途电器.空气噪声测定的试验规程.第2部分:风扇的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2: Particular requirements for fans (IEC 60704-2-7:1997); German version EN 60704-2-7:1998 |
| DIN EN 60704-2-9-2004 | 家用和类似用途电器.测定空气噪声的试验规程.第2-9部分:电动理发器具的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-9: Particular requirements for electric hair care appliances (IEC 60704-2-9:2003); German version EN 60704-2-9:2003 |
| DIN EN 60749-16-2003 | 半导体器件.机械和气候试验方法.第16部分:粒子碰撞噪声探测(PIND) | Semiconductor devices - Mechanical and climatic test methods - Part 16: Particle impact noise detection (PIND) (IEC 60749-16:2003); German version EN 60749-16:2003 |
| DIN EN 60835-3-4-1995 | 数字微波无线电发射系统设备测量方法.第3部分:卫星地面站测量.第4节:低噪声放大器 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations; section 4: Low noise amplifier (IEC 60835-3-4:1993); German version EN 60835-3-4:1995 |
| DIN EN 62150-4-2010 | 光学纤维有源元件和器件.试验和测量方法.第4部分:采用时域光学探测系统的相对强度噪声(IEC 62150-4-2009). | Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system (IEC 62150-4:2009); German version EN 62150-4:2010 |
| DIN EN 62333-1-2007 | 数字器件和设备用噪声抑制片.第1部分:定义和一般性能 | Noise suppression sheet for digital devices and equipment - Part 1: Definitions and general properties (IEC 62333-1:2006); German version EN 62333-1:2006 |
| DIN EN 62333-2-2007 | 数字器件和设备用噪声抑制片.第2部分:测量方法 | Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods (IEC 62333-2:2006); German version EN 62333-2:2006 |
| DIN EN 62333-3-2010 | 数字装置和设备用噪声抑制片.第3部分:噪声抑制片参数的特征描述(IEC 62333-3-2010).德文版本EN 62333-3-201 | Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet (IEC 62333-3:2010); German version EN 62333-3:2010 |
| DIN EN ISO 11200-2010 | 声学.机械和设备发射的噪声.在工作位置和其他特定位置测发射声压级定基本标准导则(ISO 11200-1995,含Cor 1- | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995, including Cor 1:1997); German version EN ISO 11200:2009 |
| DIN EN ISO 11201-2010 | 声学.机器和设备发射的噪声.在一个反射平面上方可忽略环境校正条件下进行工作位置和其他指定位置的发射声压 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010); German version EN ISO 11201:2010 |
| DIN EN ISO 11202-2010 | 声学.机器和设备发射的噪声.应用近似环境修正法对工作站和其他指定位置发射声压级进行测定(ISO 11202-2010) | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010); German version EN ISO 11202:2010 |
| DIN EN ISO 11203-2010 | 声学.机械装置及设备发射的噪声.根据声功率级测定工作位置和其它指定位置的发射声压级(ISO 11203-1995).德 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995); German version EN ISO 11203:2009 |
| DIN EN ISO 11204-2010 | 声学.机器和设备发射的噪声.应用精确环境校准在工作位置和其他指定位置的发射声压级测量(ISO 11204-2010). | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010); German version EN ISO 11204:2010 |
| DIN EN ISO 11688-1-2009 | 声学.低噪声机器和设备设计,推荐指南.第1部分:规划(ISO/TR 11688-1:1995),德文版本 EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995); German version EN ISO 11688-1:2009 |
| DIN EN ISO 11688-2-2001 | 声学.低噪声机械和设备推荐设计惯例.第2部分:低噪声设计的物理学说明 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998); German version EN ISO 11688-2:2000 |
| DIN EN ISO 11819-1-2002 | 声学.路面对交通噪声影响的测量.第1部分:车流统计法 | Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical pass-by method (ISO 11819-1:1997); German version EN ISO 11819-1:2001 |
| DIN EN ISO 14163-1999 | 声学.消音器控制噪声指南 | Acoustics - Guidelines for noise control by silencers (ISO 14163:1998); German version EN ISO 14163:1998 |
| DIN EN ISO 14509-1-2009 | 小型船.动力娱乐船发出的气载噪声.第1部分:经过测量程序 | Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures (ISO 14509-1:2008); English version of DIN EN ISO 14509-1:2009-01 |
| DIN EN ISO 14509-2-2007 | 小型船舶.动力娱乐船排放空气噪声测定 | Small craft - Airborne sound emitted by powered recreational craft - Part 2: Sound assessment using reference craft (ISO 14509-2:2006); English version of DIN EN ISO 14509-2:2007-02 |
| DIN EN ISO 14509-3-2009 | 小艇.由机动游艇所发出空气噪声.第3部分:使用计算和测量规程评估噪声(ISO 14509-3:2009),德文版本 EN ISO 1 | Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009); English version of DIN EN ISO 14509-3:2009-11 |
| DIN EN ISO 15667-2001 | 声学.采用隔音罩和隔音室的噪声控制指南 | Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000); German version EN ISO 15667:2000 |
| DIN EN ISO 15744-2008 | 手持非电动工具.噪声测量代码.工程法(2级) | Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002); English version of DIN EN ISO 15744:2008-11 |
| DIN EN ISO 1680-2000 | 声学.测量旋转电机发射的空气噪声的试验规程 | Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:1999); German version EN ISO 1680:1999 |
| DIN EN ISO 17201-1 Berichtigung 1-2009 | 声学.射程内噪声.第1部分:枪口炸震的测定(ISO 17201-1:2005),DIN EN ISO 17201-1:2005-11勘误表,德文版本 E | Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2005), Corrigendum to DIN EN ISO 17201-1:2005-11; German version EN ISO 17201-1:2005/AC:2009 |
| DIN EN ISO 17201-1-2005 | 声学.射程内噪声.第1部分:枪口炸震的测定 | Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2005); English version of DIN EN ISO 17201-1 |
| DIN EN ISO 17201-2-2006 | 声学.射程内噪声.第2部分:通过计算发射噪音和枪口炸震的评定(ISO 17201-2:2006) | Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation (ISO 17201-2:2006); English version of DIN EN ISO 17201-2:2006-10 |
| DIN EN ISO 17201-3-2010 | 声学. 射击场的噪声. 第3部分: 噪声传输计算指南（ISO 17201-3: 2010）; 德文版本EN ISO 17201-3: 2010 | Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation calculations (ISO 17201-3:2010); German version EN ISO 17201-3:2010 |
| DIN EN ISO 17201-4-2006 | 声学.射程内噪声.第4部分:发射噪音预报(ISO 17201-4:2006) | Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound (ISO 17201-4:2006); English version of DIN EN ISO 17201-4:2006-07 |
| DIN EN ISO 17201-5-2010 | 声学. 射击场噪声. 第5部分: 噪声管理（ISO 17201-5: 2010）; 德文版本EN ISO 17201-5: 2010 | Acoustics - Noise from shooting ranges - Part 5: Noise management (ISO 17201-5:2010); German version EN ISO 17201-5:2010 |
| DIN EN ISO 17624-2005 | 声学.利用声屏蔽法对办公室和工作间进行噪声控制的指南 | Acoustics - Guidelines for noise control in offices and workrooms by means of acoustical screens (ISO 17624:2004); German version EN ISO 17624:2004 |
| DIN EN ISO 2151-2009 | 声学.压缩机和真空泵的噪声试验规范.工程方法(2级) | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2) (ISO 2151:2004); English version of DIN EN ISO 2151:2009-01 |
| DIN EN ISO 22868-2009 | 林业机械.带内燃机的便携手持式机械的噪声试验规范.工程法(2级准确度) | Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2005); English version of DIN EN ISO 22868:2009-01 |
| DIN EN ISO 2922-2001 | 声学.内河航道和港湾船舶气载噪声测量 | Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2000); German version EN ISO 2922:2000 |
| DIN EN ISO 3095-2005 | 铁路设施.声学.有轨车辆发出噪声的测量 | Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles (ISO 3095:2005); English version of DIN EN ISO 3095 |
| DIN EN ISO 3740-2001 | 声学.噪声源声功率级测定.基础标准使用指南 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000); German version EN ISO 3740:2000 |
| DIN EN ISO 3743-2-2009 | 声学.声压法测定噪声源声功率级.混响声场中小型可移动声源的工程检测法.第2部分:专用混响试验室法(ISO 3743 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994); English version of DIN EN ISO 3743-2:2009-11 |
| DIN EN ISO 3744-2011 | 声学.声压法测定噪声源的声功率级.反射面上近似自由场的工程法(ISO 3744-2010).德文版本EN ISO 3744-2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010); German version EN ISO 3744:2010 |
| DIN EN ISO 3745-2009 | 声学,噪声源声功率级的测定.消声室和半声室精密测定(ISO 3745:2003),德文版本 EN ISO 3745:2009 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms (ISO 3745:2003); English version of DIN EN ISO 3745:2009-11 |
| DIN EN ISO 3822-3-2010 | 声学.供水设施的装置和设备发射的噪声的实验室测试.第3部分:管线阀门和管件的安装和工作条件(ISO 3822-3-19 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:1997 + Amd 1:2009); German version EN ISO 3822-3:1997 + A1:2009 |
| DIN EN ISO 389-4-1999 | 声学.音响设备校正零点参考基准.第4部分:窄带遮敝噪声用参考声级 | Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994); German version EN ISO 389-4:1998 |
| DIN EN ISO 4871-2009 | 声学.机器和设备噪声发射值的标示和验证(ISO 4871:1996),德文版本 EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996); English version of DIN EN ISO 4871:2009-11 |
| DIN EN ISO 7235-2010 | 声学.管道消音器和空气界面装置的实验室测量规程.插入损失、流动噪声和总压损失(ISO 7235-2003).德文版本EN | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003); German version EN ISO 7235:2009 |
| DIN EN ISO 9612-2009 | 声学.职业性噪声暴露的测定.工程法(ISO 9612-2009).英文版本DIN EN ISO 9612-2009-09 | Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009); English version of DIN EN ISO 9612:2009-09 |
| DIN EN ISO 9614-1-2009 | 声学.声压法测定噪声源声功率级使用声音强度法,第1部分:离散点测试(ISO 9614-1:1993),德文版本 EN ISO 9614 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993); English version of DIN EN ISO 9614-1:2009-11 |
| DIN EN ISO 9614-2-1996 | 声学.利用声音强度测定噪声源功率级.第2部分:扫描测量法 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996); German version EN ISO 9614-2:1996 |
| DIN EN ISO 9614-3-2009 | 声学,声强法测定噪声源的声功率级,第3部分:扫描测量法(ISO 9614-3:2002),EN ISO 9614-3:2009的德文版本 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002); German version EN ISO 9614-3:2009 |
| DIN EN ISO 9902-1-2009 | 纺织机械.噪声测试标准.第1部分:通用标准(ISO 9902-1:2001 + 修改件1:2009),德文版本EN ISO 9902-1:2001 + | Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001 + Amd 1:2009); German version EN ISO 9902-1:2001 + A1:2009 |
| DIN EN ISO 9902-2-2009 | 纺织机械.噪声测试标准.第2部分:纺前预处理机械和纺纱机械 (ISO 9902-2:2001 + 修该件1:2009);德文版本EN I | Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001 + Amd 1:2009); German version EN ISO 9902-2:2001 + A1:2009 |
| DIN EN ISO 9902-3-2009 | 纺织机械.噪声测试标准.第3部分:无纺机械(ISO 9902-3:2001+修改件 1:2009),德文版本EN ISO 9902-3:2001 + A | Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001 + Amd 1:2009); German version EN ISO 9902-3:2001 + A1:2009 |
| DIN EN ISO 9902-4-2009 | 纺织机械.噪声测试标准.第4部分:纱线加工,绳索加工机械(ISO 9902-4:2001+修改件1:2009),德文版本EN ISO 990 | Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001 + Amd 1:2009); German version EN ISO 9902-4:2001 + A1:2009 |
| DIN EN ISO 9902-5-2009 | 纺织机械.噪声测试标准.第5部分:织造和针织用机械(ISO 9902-5:2001 + 修改件1:2009),德文版本EN ISO 9902-5 | Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001 + Amd 1:2009); German version EN ISO 9902-5:2001 + A1:2009 |
| DIN EN ISO 9902-6-2009 | 纺织机械.噪声测试标准.第6部分:织造机械(ISO 9902-6:2001+修改件1:2009),修改件EN ISO 9902-6:2001 + A1:2 | Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001 + Amd 1:2009); German version EN ISO 9902-6:2001 + A1:2009) |
| DIN ETS 300580-3-2001 | 数字移动电话远程通信系统(阶段2).全价话务.第3部分:全价话务通道损失范围的替换和噪声抑制 (英文版本核准 | Digital cellular telecommunications system (Phase 2) - Full rate speech - Part 3: Substitution and muting of lost frames for full rate speech channels (Endorsement of the English version ETS 300580-3:1998-03 as German standard) |
| DIN ETS 300580-4-1995 | 欧洲数字移动电话远程通信系统(阶段2).第4部分:全价话务通道用噪声缓解特性; 英文版本 ETS 300580-4:1994 | European digital cellular telecommunications system (Phase 2) - Part 4: Comfort noise aspects for full rate speech traffic channels; English version ETS 300580-4:1994 |
| DIN ETS 300581-3-1996 | 欧洲数字移动电话远程通信系统.半价话务.第3部分:半价话务通道用损失范围的替换和噪声抑制; 英文版本 ETS 3 | European digital cellular telecommunications system - Half rate speech - Part 3: Substitution and muting of lost frames for half rate speech traffic channels; English version ETS 300581-3:1995 |
| DIN ETS 300581-4-1996 | 欧洲数字移动电话远程通信系统.半价话务.第4部分:半价话务通道用噪声缓解特性; 英文版本 ETS 300581-4:1995 | European digital cellular telecommunications system - Half rate speech - Part 4: Comfort noise aspects for the half rate speech traffic channel; English version ETS 300581-4:1995 |
| DIN ETS 300753-1998 | 设备工程.电信设备产生的噪声 | Equipment Engineering (EE) - Acoustic noise emitted by telecommunications equipment; English version ETS 300753:1997 |
| DIN IEC 60510-1-5-1991 | 卫星地面站无线电设备测量方法.第1部分:分系统和分系统组合件通用测量.第5节:噪声温度测量 | Methods of measurement for radio equipment used in satellite earth stations; measurement common to sub-systems and combinations of sub-systems; noise temperature measurements; identical with IEC 60510-1-5:1988 |
| DIN IEC 60510-2-3-1993 | 卫星地面站无线电设备的测量方法.分系统测量.低噪声放大器 | Methods of measurement for radio equipment used in satellite earth-stations; measurement for sub-systems; low-noise amplifier; identical with IEC 60510-2-3:1989 |
| DIN IEC 60883-1989 | 录象带色度信号与随机噪声之比的测定方法 | Measuring method for chrominance signal-to-random noise ratio for video tape recorders; identical with IEC 60883:1987 |
| DIN ISO 2923-2003 | 声学.船舱噪声测量 | Acoustics - Measurement of noise on board vessels (ISO 2923:1996 + Corrigendum 1:1997) |
| DIN ISO 362-1-2009 | 道路车辆加速产生的噪声测量.工程学方法.第1部分:M和N类 | Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories (ISO 362-1:2007 + Cor. 1:2009) |
| DIN ISO 5130-2008 | 声学.固定机动车辆产生的噪声声压级的测量 | Acoustics - Measurements of sound pressure level emitted by stationary road vehicles (ISO 5130:2007);English version of DIN ISO 5130:2008-06 |
| DIN VDE 0873 Bb.3-1991 | 架空电力线和高压设备的无线电干扰特性.第3部分:使无线电噪声产生减小到最低程度的实施规程.与CISPR 18-3:1 | Radio interference characteristics of overhead power lines and high-voltage equipment; part 3: code of practice for minimizing the generation of radio noise; identical with CISPR 18-3:1986 |
| DIN-Fachbericht 72-1998 | 汽车附加传动装置用电动机噪声质量的录入与文献加工 | () |
| 编号 | 中文名称 | 英文名称 |