| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| CISPR 18-3 AMD 1-1996 | 架空电力线路和高压设备的无线电干扰特征.第3部分:将无线电噪声产生降到最少的操作规程;修改件1 | Radio interference characteristics of overhead power lines and high-voltage equipment - Part 3: Code of practice for minimizing the generation of radio noise; Amendment 1 |
| CISPR 18-3-1986 | 高架电线和高压设备的无线干扰特性.第3部分:无线噪声产生的最小化的规范 | Radio interference characteristics ofoverhead power lines and high-voltage equipmentPart 3:Code of practice for minimizing the generationof radio noise |
| IEC 59/502/PAS-2008 | IEC/PAS 60704-2-XX,ED.1.0:家用和类似用途电器.气载噪声测定用试验规程.第2-XX部分:家用食品废弃物处理器 | IEC/PAS 60704-2-XX, ED. 1.0: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-XX: Particular requirements for household food waste disposers |
| IEC 60034-9 AMD 1-2007 | 旋转电机.第9部分:噪声限值.修改件1 | Rotating electrical machines - Part 9: Noise limits; Amendment 1 |
| IEC 60034-9 Edition 4.1-2007 | 旋转电机.第9部分:噪声限值 | Rotating electrical machines - Part 9: Noise limits |
| IEC 60034-9-2003 | 旋转电机.第9部分:噪声限值 | Rotating electrical machines - Part 9: Noise limits |
| IEC 60034-9-2007 | 旋转电机噪声测定方法及限值 第３部分：噪声限值 | Measurement of airborne noise emitted by rotating electrical machines and the noise limits -Part 3:Noise limits |
| IEC 60151-18-1968 | 电子管电性能的测量 第18部分:由机械或声音激励引起的噪声的测量方法 | Measurements of the electrical properties of electronic tubes. Part 18 : Methods of measurement of noises due to mechanical or acoustic excitations |
| IEC 60151-4-1963 | 电子管电性能的测量 第4部分:噪声系数的测量方法 | Measurements of the electrical properties of electronic tubes. Part 4 : Methods of measuring noise factor |
| IEC 60151-7-1964 | 电子管电性能的测量 第7部分:等效噪声电阻的测量 | Measurements of the electrical properties of electronic tubes. Part 7 : Measurement of equivalent noise resistance |
| IEC 60195-1965 | 固定电阻器产生电流噪声测量方法 | Method of measurement of current noise generated in fixed resistors |
| IEC 60235-2A-1974 | 微波管电性能的测量 第2部分:一般测量 补充1:第4章:寄生噪声的测量方法 | Measurement of the electrical properties of microwave tubes. Part 2 : General measurements. First supplement: Chapter V: Methods of measuring parasitic noise |
| IEC 60244-3B-1972 | 无线电发射机的测量方法 第3部分:有用调制和无用调制 补充2:无用调制，包括交流及噪声调制 | Methods of measurement for radio transmitters. Part 3 : Wanted and unwanted modulation. Second supplement: Unwanted modulation, including hum and noise modulation |
| IEC 60510-1-5-1988 | 卫星地面站用无线电设备的测量方法 第1部分:分系统和分系统组合通用的测量 第5节:噪声温度测量 | Methods of measurement for radio equipment used in satellite earth stations. Part 1: Measurements common to sub-systems and combinations of sub-systems. Section Five: Noise temperature measurements |
| IEC 60510-2-3-1989 | 卫星地面站用无线电设备的测量方法 第2部分:分系统测量 第3节:低噪声放大器 | Methods of measurement for radio equipment used in satellite earth stations; part 2: measurements for sub-systems; section three: low-noise amplifier |
| IEC 60534-8-1-2005 | 工业过程控制阀.第8-1部分:噪声的考虑.气动流流经控制阀产生的噪声的实验室测量 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
| IEC 60534-8-2-1991 | 工业过程控制阀 第8部分:噪声的考虑 第2节:流动液流经控制阀产生的噪声的实验室测量 | Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves |
| IEC 60534-8-3-2010 | 工业过程控制阀.第8-3部分:噪声的考虑.控制阀的气动噪声预测法 | Industrial-process control valves.Part 8-3: Noise considerations.Control valve aerodynamic noise predictionmethod |
| IEC 60534-8-4 Corridendum 1-2006 | 工业过程控制阀.第8-4部分:噪声问题.预测液体动力流产生的噪声.勘误1 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow; Corrigendum 1 |
| IEC 60534-8-4 Corrigendum 1-2006 | 工业过程控制阀.第8-4部分:噪声问题.预测液体动力流产生的噪声.技术勘误1 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow; Corrigendum 1 |
| IEC 60534-8-4-2005 | 工业过程控制阀.第8-4部分:噪声问题.预测液体动力流产生的噪声 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow |
| IEC 60704-2-1-2000 | 家用和类似用途电气设备.测定空气噪声的试验规程.第2-1部分:真空吸尘器的特殊要求 | Household and similar electrical applicances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners |
| IEC 60704-2-10-2004 | 家用和类似用途电器.测定空中传播噪声的试验规范.第2-10部分:电炉灶、炉架和微波炉及其任意组合的特殊要求 | Household and similar electrical apliances - Test code for the determination of airborne acoustical noise - Part 2-10: Particular requirements for electric cooking ranges, ovens grills microwave ovens and any combination of these |
| IEC 60704-2-11-1998 | 家用和类似用途电器 测定空中传播噪声的试验规范 第2-11部分:电动食品加工机的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically-operated food preparation appliances |
| IEC 60704-2-13-2011 | 家用和类似用途电器.测定空中传播噪声的试验规范.第2-13部分:抽油烟机的详细要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods |
| IEC 60704-2-14-2007 | 家用和类似用途电器.气载噪声的测定用试验规则.第2-14部分:制冷机、冷冻食品储藏柜和食品冻柜的专用要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food frozeers |
| IEC 60704-2-3 AMD 1-2005 | 修改件1.家用和类似用途电器.测定空中传播的噪声的试验规程.第2-3部分:洗碗机的特殊要求 | Amendment 1 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers |
| IEC 60704-2-3 Edition 2.1-2005 | 家用和类似用途电器.测定空中传播噪声的试验规程.第2-3部分:洗碗机的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers |
| IEC 60704-2-3-2004 | 家用和类似用途电器.测定空中传播的噪声的试验规程.第2-3部分:洗碟机的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers |
| IEC 60704-2-4-2001 | 家用和类似用途电器 测定空中传播噪声的试验规范 第2-4部分：洗衣机和离心式脱水机的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors |
| IEC 60704-2-5-2005 | 家用和类似用途电器.测定空中传播噪声的试验规程.第2-5部分:贮热式房间电暖器的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: Particular requirements for electric thermal storage room heaters |
| IEC 60704-2-6-2005 | 家用和类似用途电器.空气传播噪声测定的试验规范.第2-6部分:滚筒干衣机的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers |
| IEC 60704-2-7-1997 | 家用和类似用途电器 测定空中传播噪声的试验规范 第2-7部分:电风扇的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2: Particular requirements for fans |
| IEC 60704-2-8-1997 | 家用和类似用途电器 测定空中传播噪声的试验规范 第2-8部分:电动剃须刀的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2: Particular requirements for electric shavers |
| IEC 60704-2-9-2003 | 家用及类似用途电器.测定空中传播噪声的试验规范.第2-9部分:电动毛发护理用具的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-9: Particular requirements for electric hair care appliances |
| IEC 60704-3-2006 | 家用和类似用途电器.测定空中传播噪声的试验规范.第3部分:测定和检验宣称噪声发出值的规程 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values |
| IEC 60749-16-2003 | 半导体器件.机械和气候试验方法.第16部分:粒子冲击噪声探测(PIND) | Semiconductor devices - Mechanical and climatic test methods - Part 16: Particle impact noise detection (PIND) |
| IEC 60835-3-4-1993 | 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第4节:低噪声放大器 | Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section 4: low noise amplifier |
| IEC 60883-1987 | 磁带录像机的色度信号与随机噪声之比的测量方法 | Measuring method for chrominance signal-to-random noise ratio for video tape recorders |
| IEC 61063-1991 | 声学 汽轮机及被驱动机械发出的空气传播噪声的测量 | Acoustics; measurement of airborne noise emitted by steam turbines and driven machinery |
| IEC 61196-1-107-2005 | 同轴通信电缆.第1-107部分:电气试验方法.电缆颤噪转换电平试验(机械感应噪声) | Coaxial communication cables - Part 1-107: Electrical test methods - Test for cable microphony charge level (mechanically induced noise) |
| IEC 61265 Corrigendum 1-1995 | 电声学.航空噪声测量仪器.在运输机噪声鉴定中测量三分之一倍频带声压级装置的性能要求 | Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes |
| IEC 61265-1995 | 电声学 航空噪声测量仪器 在运输机噪声鉴定中测量三分之一带宽倍频声压级装置的性能要求 | Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure one-third-octave band sound pressure levels in noise certification of transport-category aeroplanes |
| IEC 61290-3-2008 | 光学放大器.试验方法.第3部分:噪声指数参量 | Optical amplifiers - Test methods - Part 3: Noise figure parameters |
| IEC 62150-4-2009 | 纤维光学有源元件和器件.试验和测量规程.第4部分:应用时域光学检测系统检测相对强度噪声 | Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system |
| IEC 62333-1-2006 | 数字器件和设备用噪声抑制片.第1部分:定义和一般性能 | Noise suppression sheet for digital devices and equipment - Part 1: Definitions and general properties |
| IEC 62333-2-2006 | 数字器件和设备用噪声抑制片.第2部分:测量方法 | Noise suppression sheet for digital devices and equipment - Part 2: Measuring methods |
| IEC 62333-3-2010 | 数字器件和设备用噪声抑制片.第3部分:噪声抑制片的参数特性 | Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet |
| IEC/PAS 60704-2-15-2008 | 家用和类似用途电器.气载噪声测定用试验规程.第2-15部分:家用食品废弃物处理机的特殊要求 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-15: Particular requirements for household food waste disposers |
| ISO 10302-1-2011 | 声学.小型通风装置辐射空气噪声的测量.第1部分:空气噪声测量 | Acoustics.Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices.Part 1: Airborne noise measurement |
| ISO 10996-1999 | 摄影 静止图像放映机 噪声测定 | Photography - Still-picture projectors - Determination of noise emissions |
| ISO 11200 Technical Corrigendum 1-1997 | 声学 机器和设备发射的噪声 工作位置和其他指定位置发射声压级的测量的基本标准的使用导则 技术勘误1 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions; Technical Corrigendum 1 |
| ISO 11200-1995 | 声学 机器和设备发射的噪声 工作位置和其他指定位置发射声压级的测量的基本标准的使用导则 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| ISO 11201-2010 | 声学.机器和设备发射的噪声.在一个反射平面上方可忽略环境校正条件下进行工作位置和其他指定位置的发射声压 | Acoustics.Noise emitted by machinery and equipment.Determination of emission sound pressure levels at a workstation and at other specified positions in an essentially freefield over a reflecting plane with negligible environmentalcorrections |
| ISO 11202 Technical Corrigendum 1-1997 | 声学.机器和设备发射的噪声.工作位置和其他指定位置发射声压级的测量.现场简易法.技术勘误1 | Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ; Technical Corrigendum 1 |
| ISO 11202-2010 | 声学.机器和设备发射的噪声.应用近似环境修正法对工作站和其他指定位置发射声压级进行测定 | Acoustics.Noise emitted by machineryand equipment.Determination ofemission sound pressure levels at a workstation and at other specified positionsapplying approximate environmentalcorrections |
| ISO 11203-1995 | 声学 机器和设备发射的噪声 从声功率级测定工作位置和其他指定位置发射声压级 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| ISO 11204-2010 | 声学.机器和设备发射的噪声.应用精确环境校准在工作位置和其他指定位置的发射声压级测量 | Acoustics.Noise emitted by machinery and equipment.Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| ISO 11205-2003 | 声学.机械和设备发射的噪声.利用声强现场测定工作位置和其他指定位置发射声压级的工程法 | Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity |
| ISO 11689 Technical Corrigendum 1-2007 | 声学.机械和设备发射噪声数据的比较程序.技术勘误1 | Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment; Technical Corrigendum 1 |
| ISO 11689-1996 | 声学 机器和设备发射噪声数据的比较方法 | Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment |
| ISO 11690-1-1996 | 声学 低噪声机器工作间设计的推荐实用规程 第1部分:噪声控制策略 | Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies |
| ISO 11690-2-1996 | 声学 低噪声机器工作间设计的推荐实用规程 第2部分:噪声控制措施 | Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures |
| ISO 11819-1-1997 | 声学 路面对交通噪声影响的测量 第1部分:统计旁路法 | Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical pass-by method |
| ISO 12001-1996 | 声学 机器和设备发射的噪声 噪声试验规程的介绍和起草规则 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code |
| ISO 13332-2000 | 往复式内燃机 在发动机底座处测量由高速和中速往复式内燃机产生的结构噪声的试验规程 | Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet |
| ISO 13472-1-2002 | 声学.施工现场路面对噪声吸收性能的测量.第1部分:扩大表面法 | Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method |
| ISO 13472-2-2010 | 声学.施工现场路面对噪声吸收性能的测量.第2部分:反射表面用现场法 | Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 2: Spot method for reflective surfaces |
| ISO 14163-1998 | 声学 消声器噪声控制指南 | Acoustics - Guidelines for noise control by silencers |
| ISO 14509-1-2008 | 小型船.动力娱乐船排放的空气噪声.第1部分:经过测量程序 | Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measurement procedures |
| ISO 14509-2-2006 | 小艇.动力娱乐船排放空气噪声测定.第2部分:用基准船作噪声评估 | Small craft - Airborne sound emitted by powered recreational craft - Part 2: Sound assessment using reference craft |
| ISO 14509-3-2009 | 小型船舶.动力游艇发出的声音.第3部分:利用计算和测量程序评定噪声 | Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures |
| ISO 15086-1-2001 | 液压传动 部件和系统的流体噪声特性的测定 第1部分：引言 | Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 1: Introduction |
| ISO 15086-2-2000 | 液压传动 元件和系统油液通过孔径噪声特性的测定 第2部分:管路油液中声音速度的测定 | Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 2: Measurement of speed of sound in a fluid in a pipe |
| ISO 15664-2001 | 声学 开放式工厂的噪声控制设计规程 | Acoustics - Noise control design procedures for open plant |
| ISO 15667-2000 | 声学 采用隔声罩和隔声小室的噪声控制指南 | Acoustics - Guidelines for noise control by enclosures and cabins |
| ISO 15739-2003 | 摄影.电子静止图象成像.噪声测量 | Photography - Electronic still-picture imaging - Noise measurements |
| ISO 15744-2002 | 手持非电动工具.噪声测量代码.工程法(2级) | Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) |
| ISO 16832-2006 | 声学.利用类别法定义噪声等级 | Acoustics - Loudness scaling by means of categories |
| ISO 17201-1 Technical Corrigendum 1-2009 | 声学.射程内噪声.第1部分:测量用枪口炸震的测定.技术勘误1 | Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement; Technical Corrigendum 1 |
| ISO 17201-1-2005 | 声学.射程内噪声.第1部分:枪口炸震的测定 | Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement |
| ISO 17201-2-2006 | 声学.射程内噪声.第2部分:通过计算发射噪音和枪口炸震的评定 | Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation |
| ISO 17201-3-2010 | 声学.射击场的噪声.第3部分:噪声传输计算用指南 | Acoustics - Noise from shooting ranges - Part 3: Guidelines for sound propagation calculations |
| ISO 17201-4-2006 | 声学.射程内噪声.第4部分:发射噪音预报 | Acoustics - Noise from shooting ranges - Part 4: Prediction of projectile sound |
| ISO 17201-5-2010 | 声学.射击场的噪声.第5部分:噪声管理 | Acoustics - Noise from shooting ranges - Part 5: Noise management |
| ISO 1996-1-2003 | 声学 环境噪声的描述、测量和评价 第1部分:基本参量和评价方法 | Acoustics - Description, measurement and assessment of environmental noise - Part 1: Basic quantities and assessment procedures |
| ISO 1996-2-2007 | 声学.环境噪声的描述、测量和评估.第2部分:环境噪声级别的测定 | Acoustics - Description, measurement and assessment of environmental noise - Part 2: Determination of environmental noise levels |
| ISO 1999-1990 | 声学 职业性噪声暴露的测定和噪声引起的听力损伤的估算 | Acoustics; determination of occupational noise exposure and estimation of noise-induced hearing impairment |
| ISO 20361-2007 | 液态泵和泵装置.空气噪声试验规则.2级和3级精度 | Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy |
| ISO 20906-2009 | 声学.机场附近飞机噪声的无人监测 | Acoustics - Unattended monitoring of aircraft sound in the vicinity of airports |
| ISO 2151-2004 | 声学.压缩机和真空泵的噪声试验规范.工程方法(2级) | Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) |
| ISO 22897-2003 | 建筑物用玻璃.玻璃和空气噪声隔绝.产品描述和性能测定 | Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
| ISO 230-5-2000 | 机床检验通则 第5部分:噪声发射的测定 | Test code for machine tools - Part 5: Determination of the noise emisssion |
| ISO 2923 Technical Corrigendum 1-1997 | 声学 船上的噪声测量 技术勘误1 | Acoustics - Measurement of noise on board vessels; Technical Corrigendum 1 |
| ISO 2923-1996 | 声学 船上的噪声测量 | Acoustics - Measurement of noise on board vessels |
| ISO 362-1-2007 | 加速道路车辆发出噪声的测量.工程法.第1部分:M和N分类 | Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories |
| ISO 3740-2000 | 声学 噪声源声功率级的测定 基本标准使用导则 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use basic standards |
| ISO 3741-2010 | 声学.声压法测定噪声源声功率级.混响室精密法 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms |
| ISO 3743-1-2010 | 声学.利用声压的噪声源声功率级和声能级的测定.专用混响现场内小型可移动声源的工程方法.第1部分:硬质围墙 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room |
| ISO 3743-2-1994 | 声学 声压法测定噪声源声功率级 混响声场中小型可移动声源的工程法 第2部分:专用混响试验室法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms |
| ISO 3745-2003 | 声学.用声压法测定噪声源声功率级.消声室和半消声室精密法 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms |
| ISO 3822-1-1999 | 声学 供水设施的装置和设备发射的噪声的实验室测试 第1部分:测量方法 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement |
| ISO 3822-2-1995 | 声学 供水设施的装置和设备发射的噪声的实验室测试 第2部分:放水龙头和混合阀的安装和工作条件 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves |
| ISO 3822-3 AMD 1-2009 | 声学.供水设施用装置和设备发射噪声的实验室试验.第3部分:管路阀门和器件的安装和工作条作.修改件1 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances; Amendment 1 |
| ISO 3822-3-1997 | 声学 供水设施的装置和设备发射的噪声的实验室测试 第3部分:管路阀门和器件的安装和工作条作 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances |
| ISO 3822-4-1997 | 声学 供水设施的装置和设备发射的噪声的实验室测试 第4部分:专用器件的安装和工作条件 | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances |
| ISO 389-4-1994 | 声学 校正听力设备的基准零级 第4部分:窄带掩蔽噪声基准级 | Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise |
| ISO 4412-1-1991 | 液压传动 空气噪声级测定的试验规范 第1部分:泵 | Hydraulic fluid power; test code for determination of airborne noise levels; part 1: pumps |
| ISO 4412-2-1991 | 液压传动 空气噪声级测定的试验规范 第2部分:马达 | Hydraulic fluid power; test code for determination of airborne noise levels; part 2: motors |
| ISO 4412-3-1991 | 液压传动 空气噪声级测定的试验规范 第3部分:泵 采用平行六面体传声器阵列的方法 | Hydraulic fluid power; test code for determination of airborne noise levels; part 3: pumps; method using a parallelepiped microphone array |
| ISO 5128-1980 | 声学 汽车内的噪声的测量 | Acoustics; Measurement of noise inside motor vehicles |
| ISO 5131-1996 | 声学 农林拖拉机和机械 操作者位置处噪声的测量 简易法 | Acoustics - Tractors and machinery for agriculture and forestry - Measurement of noise at the operator's position - Survey method |
| ISO 5135-1997 | 声学 在混响室中测定空调终端设备、空调终端单元、阻尼器和调节阀门的噪声功率级 | Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room |
| ISO 6393-2008 | 土方机械.噪声功率级的测定.静态试验条件 | Earth-moving machinery - Determination of sound power level - Stationary test conditions |
| ISO 6394 Technical Corrigendum 1-2009 | 土方机械.在操作者位置处测定运土机械发射的噪声.稳态试验条件,技术勘误表1 | Earth-moving machinery - Determination of emission sound pressure level at operator's position - Stationary test conditions; Technical Corrigendum 1 |
| ISO 6798-1995 | 往复式内燃机 辐射的空气噪声测量 工程法和简易法 | Reciprocating internal combustion engines - Measurement of emitted airborne noise - Engineering method and survey method |
| ISO 7216-1992 | 声学 农林轮式拖拉机和自行机械 行驶时的噪声的测量 | Acoustics; agricultural and forestry wheeled tractors and self-propelled machines; measurement of noise emitted when in motion |
| ISO 7235-2003 | 声学.管道消音器和空气界面装置的实验室测量步骤.插入损失、流动噪声和总压损失 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss |
| ISO 7574-1-1985 | 声学 测定和检验机械及设备噪声标定值的统计方法 第1部分:一般考虑和定义 | Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 1 : General considerations and definitions |
| ISO 7574-2-1985 | 声学 测定和检验机械及设备噪声标定值的统计方法 第2部分:用于单个机械的方法 | Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 2 : Methods for stated values for individual machines |
| ISO 7574-3-1985 | 声学 测定和检验机械及设备噪声标定值的统计方法 第3部分:用于机组的简易(传递)法 | Acoustics; Statistical methods for determining and verifying stated noise emission values of machinery and equipment; Part 3 : Simple (transition) method for stated values for batches of machines |
| ISO 7574-4-1985 | 声学 测定和检验机械及设备噪声标定值的统计方法 第4部分:用于机组的方法 | Acoustics; statistical methods for determining and verifying stated noise emission values of machinery and equipment; part 4: methods for stated values for batches of machines |
| ISO 7960-1995 | 机床噪声 木工机床的工作条件 | Airborne noise emitted by machine tools - Operating conditions for woodworking machines |
| ISO 8525-2008 | 机械工具发出的空气噪声.金属切割机的运行条件 | Airborne noise emitted by machine tools - Operating conditions for metal-cutting machines |
| ISO 8528-10-1998 | 往复式内燃交流发电机组 第10部分:包络面法测量空气噪声 | Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise by the enveloping surface method |
| ISO 9295-1988 | 声学 计算机和办公装置发射的高频噪声的测量 | Acoustics; measurement of high-frequency noise emitted by computer and business equipment |
| ISO 9296-1988 | 声学 计算机和办公设备噪声发射的申报值 | Acoustics; declared noise emission values of computer and business equipment |
| ISO 9568-1993 | 电影 影院、鉴定放映室及混录棚的背景噪声声级 | Cinematography; background acoustic noise levels in theatres, review rooms and dubbing rooms |
| ISO 9614-1-1993 | 声学 声强法测定噪声源声功率级 第1部分:离散点测量法 | Acoustics; determination of sound power levels of noise sources using sound intensity; part 1: measurement at discrete points |
| ISO 9614-2-1996 | 声学 声强法测定噪声源声功率级 第2部分:扫描测量法 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning |
| ISO 9614-3-2002 | 声学.利用声音强度测定噪声源功率级.第3部分:扫描测量精度法 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurements by scanning |
| ISO 9645-1990 | 声学 运动中的双轮机动自行车发射噪声的测量 工程法 | Acoustics; measurement of noise emitted by two-wheeled mopeds in motion; engineering method |
| ISO 9902-1-2001 | 纺织机械 噪声检测规则 第1部分：通用要求 | Textile machinery - Noise test code - Part 1: Common requirements |
| ISO 9902-2 AMD 1-2009 | 纺织机械.噪声试验规则.第2部分:纺纱准备和纺纱机械.修改件1 | Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery; Amendment 1 |
| ISO 9902-2-2001 | 纺织机械 噪声检测规则 第2部分：纺纱准备和纺纱机械 | Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery |
| ISO 9902-3-2001 | 纺织机械 噪声检测规则 第3部分：无纺机械 | Textile machinery - Noise test code - Part 3: Nonwoven machinery |
| ISO 9902-4-2001 | 纺织机械 噪声检测规则 第4部分：纱线处理、缆索和绳索制造机械 | Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery |
| ISO 9902-5-2001 | 纺织机械 噪声检测规则 第5部分：织造和针织准备机械 | Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery |
| ISO 9902-6-2001 | 纺织机械 噪声检测规则 第6部分：织物制造机械 | Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery |
| ISO 9902-7-2001 | 纺织机械 噪声检测规则 第7部分：染整机械 | Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery |
| ISO/TR 11688-1-1995 | 声学 低噪声机器和设备设计的推荐实用规程 第1部分:计划 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning |
| ISO/TR 11688-2-1998 | 声学 低噪声机器和设备设计的推荐实用规程 第2部分:低噪声设计的物理工程说明 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design |
| ISO/TR 11690-3-1997 | 声学 低噪声机器工作间设计的推荐实用规程 第3部分:工作室中的声传播和噪声预测 | Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms |
| ISO/TS 15666-2003 | 声学.应用社会调查和社会声学调查评价噪声烦恼度 | Acoustics - Assessment of noise annoyance by means of social and socio-acoustic surveys |
| ISO/TS 4869-5-2006 | 声学.听力保护.第5部分:与新的试验目标对应的噪声减弱估算方法 | Acoustics - Hearing protectors - Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects |
| 编号 | 中文名称 | 英文名称 |