| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 10050-4-1973 | 奶油包装材料的检验.耐叠层剥离性的测定 | Testing of butter wrappers; determination of resistance against delamination |
| DIN 10050-7-1973 | 奶油包装材料的检验.与奶油接触的包装材料表面水溶性成分的测定 | Testing of butter wrappers, determination of water soluble components of the surface of the wrapper contacting butter |
| DIN 10050-9-1973 | 奶油包装材料的检验.透明性的测定 | Testing of butter wrappers; determination of transmission |
| DIN 10082-1996 | 包装材料.黄油卷包装.交货技术条件 | Packaging - Butter wrappers - Technical delivery conditions |
| DIN 10259-1998 | 香烟过滤嘴,香烟和其它烟草制品包装用材料.柠檬酸含量的测定 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content |
| DIN 10370-1998 | 香烟过滤嘴,香烟和其它烟草制品包装用材料.醋酸盐含量的测定 | Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content |
| DIN 10519-2000 | 食品卫生.未包装食物用的自助设备.卫生要求 | Food hygiene - Self-service equipment for unpackaged food - Hygiene requirements |
| DIN 10522-2006 | 食品卫生.未包装食品用可重复使用的盒子和容器的商业清洁.卫生要求、试验 | Food hygiene - Commercial cleaning of reusable boxes and reusable containers for unpackaged foodstuffs - Hygiene requirements, testing |
| DIN 10955-2004 | 感官分析.食品用包装材料和包装件的检验 | Sensory analysis - Testing of packaging materials and packages for foodstuffs |
| DIN 15158-1-2005 | 包装.物料运输用托盘.第1部分:平托盘试验的性能要求和选择 | Packaging - Pallets for materials handling - Part 1: Performance requirements and selection of tests for flat pallets |
| DIN 15158-2-2005 | 包装.物料运输用托盘.第2部分:工作载荷 | Packaging - Pallets for materials handling - Part 2: Working load |
| DIN 16995-1992 | 包装用薄膜.塑料薄膜.性能和试验方法 | Films for packaging; plastic films; properties, testing |
| DIN 19302-2006 | 包装材料.通用包装纸.要求、试验方法 | Packaging materials - Paper for general packaging purposes - Requirements, test method |
| DIN 2003-2-1987 | 金属包装.非叠码的圆柱形罐 | Metal packages; canisters, cylindrical, non-stackable |
| DIN 2023-1-1998 | 金属包装.圆折边盖.尺寸.第1部分:尺寸、材料、标记 | Metal packages - Ends for double seaming, round - Part 1: Dimensions, material, marking |
| DIN 2023-2-1998 | 金属包装.圆形双重卷边端部.第2部分:卡紧配合尺寸 | Metal packages - Ends for double seaming, round - Part 2: Chuckfit gauges |
| DIN 2023-3-1998 | 金属包装.圆形双重卷边端部.第3部分:折边咬合 | Metal packages - Ends for double seaming, round - Part 3: Seaming chucks |
| DIN 2032-1987 | 金属包装.薄板金属材料的加螺定封包 | Metal packages; screwed closures of light gauge metal |
| DIN 24500-10-1971 | 轧制设备.第10部分:轧钢机、包封设备、收集、捆扎装、轧制材料捆扎包装标识 | Rolling mill equipment; rolling mills for steel, designations of equipment for wrapping, collecting, bundling, binding an packing of rolled material |
| DIN 25493-1997 | 核设施.防止金属部件表面受到组装工具、密封、装璜、包装材料和隔热材料的损伤 | Nuclear facilities - Protection of metallic surfaces of structural parts from damage from assembly aids, gaskets, packings, packaging material and thermal insulating materials |
| DIN 32-3-1981 | 包装.预包装的包装手段.第3部分:管道用盒量度的测定 | Packaging; means of packaging for pre-packages; determination of measures for boxes for tubes |
| DIN 32-5-1983 | 包装.预包装货物（快装包装）的包装方法.粘胶包装件的体积 | Packaging; means of packaging for pre-packed-goods (ready packs); volume of packages made for adhesifs |
| DIN 45635-28-1980 | 机器空气噪声的测量.包络面法.包装和类似机器 | Measurement of airborne noise emitted by machines; enveloping surface method; packaging and allied machinery |
| DIN 5059-1-1992 | 包装.金属和塑料管.金属管.管嘴、管肩 | Packaging; metal and plastic tubes; metal tubes; tube nozzles, tube shoulders |
| DIN 5059-2-1990 | 包装.金属和塑料管.塑料管.管嘴 | Packaging; metal and plastic tubes; plastic tubes; tube nozzles |
| DIN 5060-1985 | 包装材料.管端封口 | Means of packaging; closures for tube ends |
| DIN 5065-1987 | 包装.金属及塑料软管用端口塑料密封物 | Packaging; plastic closures for metal and plastic tubes |
| DIN 5090-1997 | 包装容器.包装瓶 | Means of packaging - Bottles for packaging |
| DIN 5097-1999 | 包装辅助材料.瓶子夹塞 | Auxiliary packaging means - Clipclocks for bottles |
| DIN 53757-1977 | 塑料制品的检验.用长期堆垛试验测定运输和贮存包装箱的性能 | Testing of plastics articles; determination of the behaviour by stacking by long-time-test, boxes for transport and storage |
| DIN 55402-2-1982 | 包装件装运标记.出口商品包装导则 | Marking for shipping of packages; directive for export packaging |
| DIN 55405-2006 | 包装.术语.术语和定义 | Packaging - Terminology - Terms and definitions |
| DIN 55406-2007 | 包装.聚乙烯或聚丙烯制作的单层或双层28mm螺丝盖和铝制28mm保温瓶的交货、购买和使用特殊规范 | Packaging - Special requirements for the delivery, purchase and use of one-piece and two-piece 28 mm screw caps made from polyethylene (PE) or polypropylene (PP) and 28 mm rolled-on closures made from aluminium (Al) |
| DIN 55407-1-1995 | 包装.一般交货与供货技术条件.第1部分:基本要素 | Packaging - General technical terms of delivery and supply - Part 1: Basics |
| DIN 55407-2-1995 | 包装.一般交货与供货技术条件.第2部分:误差一览表 | Packaging - General technical terms of delivery and supply - Part 2: Catalogue of errors |
| DIN 55408-1-1978 | 包装.技术规范与交货条件.基础 | Packaging; technical specifications and delivery, basics |
| DIN 55412-1-1988 | 包装.第1部分:按直线排放可装 20 瓶啤洒(0.5 升型欧洲酒瓶)的 400 mm x 300 mm 塑料制啤洒码放箱 | Packaging; 400 mm 300 mm plastic stacking crate, for 20 beer bottles (0,5 l Eurobottle), in linear arrangement |
| DIN 55412-2-1988 | 包装.第2部分:按直线排放可装 24 瓶啤洒(0.33 升型法国维希酒瓶)的 400 mm x 300 mm 塑料制啤洒码放箱 | Packaging; 400 mm 300 mm plastic stacking crate, for 24 beer bottles (0,33 l Vichytype), in linear arrangement |
| DIN 55427-1983 | 包装方法.塑料箱.12瓶规格 | Packaging means; plastic crates; 12 bottle size |
| DIN 55428-1-1998 | 包装材料.硬质纤维板.第1部分:要求和试验 | Packaging materials - Solid fibreboard - Part 1: Requirements, testing |
| DIN 55428-2-1998 | 包装材料.硬质纤维板.第2部分:湿强度.要求和试验 | Packaging materials - Solid fibreboard - Part 2: Wet strength; requirements, testing |
| DIN 55429-2-1987 | 包装.纸板、硬纤维板或波纹板制箱子.尺寸、极限偏差、尺寸检验 | Packaging; boxes manufactured from board, solid fibre-board or corrugated board; dimensions, limit deviations, testing of dimensions |
| DIN 55436-2-1990 | 包装试验.铝管.管体变形性的测定 | Packaging test; tubes made of aluminium; determination of the deformability of the tube body |
| DIN 55436-6-1985 | 包装试验.铝制管.内外保护漆的粘合强度的配置 | Packaging test; tubes made of aluminium; disposition of the adhesive strength of the inside and outside protective lacquer |
| DIN 55440-1-1991 | 包装检验.压紧检验.用恒定传送速度检验 | Packaging test; compression test; test with a constant conveyance-speed |
| DIN 55441-2-1998 | 包装试验.撞击试验.第2部分:塑料瓶的自由落体试验 | Packaging test - Impact test - Part 2: Free drop of plastic bottles |
| DIN 55445-1-1985 | 包装试验.纸袋胶接缝耐久性的测定 | Packaging test; determination of endurance of glue seams of papersacks |
| DIN 55445-2-1974 | 包装试验.塑料袋缝口耐久性的测定 | Packaging test; determination of endurance of seams of plasticsacks |
| DIN 55445-3-1974 | 包装试验.第3部分:口袋接缝耐久性测定.标图法 | Packaging test; determination of endurance of sack seams, plotting method |
| DIN 55446-1991 | 包装.包装和满装包装件包装的方法.抽样 | Packaging; means of packaging and complete filled transport packages; sampling |
| DIN 55450-1986 | 包装.纸包装袋.类型 | Packaging; paper bags; types |
| DIN 55455-1986 | 包装.纸制手提袋.类型 | Packaging; paper carrier bags; types |
| DIN 55457-1-2000 | 包装试验.聚烯烃容器.抗应力开裂性.温度程序 | Packaging test - Containers made from polyolefines - Part 1: Tension cracking resistance; temperature procedure |
| DIN 55457-2 Bb.1-1986 | 包装试验.聚烯烃容器.用压力温度法检验抗应力裂纹性能.第2 Bb 1部分:试验设备设计示例 | Packaging test; containers made from polyolefins; stress cracking resistance, pressure-temperature method; examples for the design of test equipment |
| DIN 55457-2-2000 | 包装试验.聚烯烃容器.抗应力开裂性.第2部分:压力温度程序 | Packaging test - Containers made from polyolefines - Part 2: Tension cracking resistance; pressure-temperature procedure |
| DIN 55461-2-1991 | 大型包装材料.第2部分:柔性 IBC 尺寸 | Large size packages; flexible IBC; dimensions |
| DIN 55465-2-1992 | 垃圾用纸或聚乙烯薄膜包装材料.标称容量50公升以下的袋子.形状、尺寸、要求、检验 | Packaging made from paper or polyethylene for waste; bags with a nominal capacity up to 50 l, shapes, dimensions, requirements, tests |
| DIN 55467-1987 | 包装.装箱单和文件用的保护盖和扁平袋 | Packaging; coverings and flat bags for packing lits and documents |
| DIN 55468-1-2004 | 包装材料.波纹纸板.第1部分:要求、检验 | Packaging materials - Corrugated board - Part 1: Requirements, testing |
| DIN 55468-2-2004 | 包装材料.波纹纸板.第2部分:耐湿性、要求和检验 | Packaging materials - Corrugated board - Part 2: Wet strength, requirements, testing |
| DIN 55471-1-1983 | 包装用聚苯乙烯泡沫塑料.要求和检验 | Cellular polystyrene for packaging; requirements and testing |
| DIN 55471-2-1987 | 包装用聚苯乙烯泡沫塑料.模塑包装材料的造型 | Cellular polystyrene for packaging; design of moulded packaging |
| DIN 55473-2001 | 辅助包装方法.干燥剂袋.交货技术条件 | Auxiliary means of packaging - Desiccant in bag - Technical delivery conditions |
| DIN 55474-1997 | 包装辅助材料.干燥剂袋.应用、所需干燥剂袋数的计算 | Auxiliary means of packaging - Desiccants in bag - Application, calculation of the required number of desiccant units |
| DIN 55475-1997 | 包装辅助材料.牛皮纸制粘合带.未增强和增强可水活化或热活化.要求和试验 | Auxiliary means of packaging - Tapes from kraftpaper - Not reinforced or reinforced, water or heat activatable; requirements and testing |
| DIN 55477-1990 | 包装.非增强和增强的塑料带.要求和试验 | Packaging; non-reinforced and reinforced plastic tapes; requirements and testing |
| DIN 55479-2000 | 包装.用压敏胶粘带和胶纸带密封纸板盒和包装箱的种类 | Packaging - Types of sealings of cartons and boxes by means of pressure-sensitive adhesive tape and gummed paper tape |
| DIN 55480-1976 | 包装方法.带螺旋盖的铝制圆罐 | Means of packaging; cans made of aluminium with screw caps, round |
| DIN 55481-1-1987 | 包装用聚乙烯泡沫塑料.要求、试验 | Cellular polyethylene for packaging; requirements, tests |
| DIN 55482-1-1989 | 包装用聚亚氨酯泡沫塑料.第1部分:要求、检验 | Cellular polyurethane for use in packaging; requirements and testing |
| DIN 55483-1-1984 | 包装用橡胶纤维和/或动物纤维.第1部分:要求、检验 | Rubberized fibre and/or hair for packaging; requirements, testing |
| DIN 55505-1973 | 气溶胶包装.盖座高度 | Aerosol packages; cover seat height |
| DIN 55507-1976 | 气溶胶包装.弯钉固定工具的工作面 | Aerosol package; work parts of tools for clinching |
| DIN 55510-1-2005 | 包装.包装区的尺寸协调.第1部分:原则 | Packaging - Dimensional coordination in the field of packaging - Part 1: Principles |
| DIN 55510-2-2005 | 包装.包装区的尺寸协调.第2部分:术语 | Packaging - Dimensional coordination in the field of packaging - Part 2: Terminology |
| DIN 55510-3-2005 | 包装.包装区的尺寸协调.第3部分:规则和尺寸 | Packaging - Dimensional coordination in the field of packaging - Part 3: Rules and dimensions |
| DIN 55511-1-1984 | 包装方法.可调整到600mm×400mm、用硬纤维板和波纹板制成的包装箱.带底和折板顶盖的可折叠箱 | Means of packaging; boxes manufactured from solid fibre-board or corrugated board, adjusted to 600 mm 400 mm (area module); folding boxes with bottom and top flaps |
| DIN 55511-3-1984 | 包装方法.可调整到600mm×400mm、用硬纤维板和波纹板制成的包装箱.伸缩式包装箱 | Means of packaging; boxes manufactured from solid fibre-board or corrugated board, adjusted to 600 mm 400 mm (area module); telescope boxes |
| DIN 55512-7-1981 | 包装.单件包装.第7部分:纸、缮写用品的量度标准 | Packaging; unit packs; paper, writing materials; measures |
| DIN 55520-1985 | 货运包装的配置面积.从800mm×1200mm和1000mm×1200mm的配置面积进行的推算 | Position areas for shipping packages, derived from the position areas 800 mm × 1200 mm and 1000 mm × 1200 mm |
| DIN 55522-1987 | 包装.纸板箱.带插入底板和插入盖的折叠纸板箱.纸箱尺寸的确定 | Packaging; cartons made of cartonboard; cartons with tuck-in base and lid; determination of the dimensions of cartons |
| DIN 55524-1-2005 | 包装.分装盒.第1部分:瓦楞纸板制作的包装用分装盒 | Packaging - Attributes - Part 1: Attributes for packaging made of corrugated fibreboard |
| DIN 55524-2-2005 | 包装.分装盒.第2部分:实芯纸板制作的包装用分装盒 | Packaging - Attributes - Part 2: Attributes for packaging made of solid board |
| DIN 55526-1-1991 | 包装试验.压缩试验.标称容积10升以下的塑料容器的动态试验 | Packaging test; compression test; dynamical test for plastic containers, with a capacity up to 10 liters |
| DIN 55529-2005 | 包装.测定软包装材料制密封件的密封接缝强度 | Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material |
| DIN 55530-1987 | 包装用塑料薄膜.低密度聚乙烯隔挡材料 | Plastic films for packaging; barrier materials made of low density polyethylene |
| DIN 55531-1988 | 包装用金属箔.叠层铝箔 | Foils for packaging; laminated aluminium foils |
| DIN 55533-2005 | 包装材料试验.用有示踪气体的挠性试验室对薄膜或箔制包装材料的泄漏性进行的完整检验法 | Packaging testing - Integral test method for packagings made of films or foils for leakage using a flexible test chamber with tracer gas |
| DIN 55534-2006 | 用水作为试验媒介通过顶部空间从包装和包装材料上味觉迁移的试验 | Testing of taste transfer from packages and packaging materials through the head space using water as the test medium |
| DIN 55540-1 Bb.1-1979 | 包装的检验.预包装充满率的测定.包装材料密度和粘合剂及类似产品包装的变化系数表格 | Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products |
| DIN 55540-1 Bb.2-1980 | 包装检验.预包装充满率的规定.产品密度和植物防护产品及类似产品包装的变化系数表格 | Package testing; stipulation of filling rate of pre-packages, form with coefficient of variation of the density of products and of the package for plants protection products and similar products |
| DIN 55540-1 Bb.3-1988 | 包装检验.预包装件装满率的规定.洗涤、清洁及类似制品的包装密度变量系数的表格 | Package testing; stipulation of filling rate of pre-packages, form with coefficient of variation of the density of products and of the package for washing and cleaning products and similar products |
| DIN 55540-1 Bb.4-1980 | 包装试验.预包装充满率的规定.产品密度和清洗产品包装变化系数表格 | Package testing; stipulation of filling rate of pre-packages, form with coefficient of variation of the density of products and of the package for cleaning products |
| DIN 55540-1-1978 | 包装检验.第1部分:标准容量预包装填充率的测定.预包装物品按重量标注 | Testing of packaging; determining the filling ratio of standard capacity prepacks; prepacks whose contents are indicated by weight |
| DIN 55542-2-1985 | 包装试验.包装容器容积的测定.圆筒形管 | Packaging test; determination of capacity for means of packaging, cylindrical tubes |
| DIN 55542-4-1990 | 包装试验.锥形管包装容量的测定.锥形管 | Packaging test; determination of capacity for packages, conical tubes |
| DIN 55543-1-1986 | 包装试验.塑料袋试验方法.薄膜厚度的测定 | Packaging test; test methods for plastic sacks; determination of the film thickness |
| DIN 55543-2-1984 | 包装试验.塑料袋试验方法.胶接缝抗剥离性的测定 | Packaging test; test methods for plastic sacks; determination of the peel resistance of glued seams |
| DIN 55543-3-1985 | 包装检验.塑料袋试验方法.纵向接缝强度的测定 | Testing of packaging; methods of test for plastic sacks; determination of the strenght of longitudinal seams |
| DIN 55543-4-1985 | 包装检验.塑料袋试验方法.第4部分:聚乙烯薄膜皱缩的测定 | Testing of packaging; methods of test for plastic sacks; determination of the shrinkage of polyethylene films |
| DIN 55545-1-2006 | 包装.绝缘性能的包装.第1部分:初始评价试验 | Packaging - Packaging with insulating properties - Part 1: Initial evaluation testing |
| DIN 55560-1-1988 | 可再封闭的防儿童打开的包装.带压力/转动系统(轴向压力作用)的塑料螺旋罩.特技系统的机械检验 | Reclosable child resistant packages; plastic screw closures with press/turn system (axial pressure effect); mechanical testing of trick system |
| DIN 58952-2-1977 | 消毒.第2部分:消毒物品、金属制筐用包装材料 | Sterilization; packing materials for sterilizing goods, sterilizing baskets made of metal |
| DIN 58952-3-1977 | 消毒.第3部分:消毒物品、金属制仪器托盘用包装材料 | Sterilization; packing materials for sterilizing goods, instrument trays made of metal |
| DIN 58953-7-2003 | 消毒.消毒材料供应.第7部分:消毒纸、非织造的包装材料、纸袋、耐热和自密封袋和纸带盘的使用 | Sterilization - Sterile supply - Part 7: Use of sterilization paper, nonwoven wrapping material, paper bags and heat and self-sealable pouches and reels |
| DIN 6075-1-1997 | 包装材料.瓶.第1部分:维希型1 | Means of packaging - Bottles - Part 1: Vichy-shape 1 |
| DIN 6075-2-2000 | 包装方法.瓶.第2部分:维希(Vichy)型2 | Means of packaging - Bottles - Part 2: Vichy-shape 2 |
| DIN 6094-10-1998 | 包装.广口玻璃瓶瓶塞.第10部分:翻边瓶塞 | Means of packaging - Finishes for wide-mouthed glass containers - Part 10: Beaded edge finishes |
| DIN 6094-12-1995 | 包装.瓶口.第12部分:带内压的 7.5 R 螺旋瓶口 | Packaging - Finishes for bottles - Part 12: Screw thread 7,5 R for bottles with internal pressure |
| DIN 6094-13-1997 | 包装材料.瓶塞.第13部分:2道和3道螺纹瓶塞 | Means of packaging - Finishes - Part 13: 2 thread- and 3 thread-screw-finishes |
| DIN 6094-14-1995 | 包装.瓶口.第14部分:带内压的 8 G 螺旋瓶口 | Packaging - Finishes for bottles - Part 14: 8 G screw-thread for bottles with internal pressure |
| DIN 6094-3-2003 | 包装方法.瓶口.第3部分:适用于拉起式瓶塞的瓶口 | Means of packaging - Finishes - Part 3: Finish for lever stoppers |
| DIN 6094-5-2000 | 包装材料.瓶塞.第5部分:汽酒瓶用塑料瓶塞、软木塞和冠状软木塞 | Packaging - Finishes - Part 5: Finishes for sparkling wine bottles with plastics and cork stoppers and crown corks |
| DIN 6094-7-1995 | 包装.瓶口.第7部分:防盗酒瓶口 | Packaging - Finishes for bottles - Part 7: Pilferprooffinishes |
| DIN 6094-8-1997 | 包装材料.瓶塞.第8部分:外螺纹 | Means of packaging - Finishes - Part 8: With external screw thread |
| DIN 6096-1998 | 包装材料.0,75升的装发泡酒的酒瓶 | Packaging - 0,75 l bottles for sparkling wines |
| DIN 6099-1997 | 包装材料.冠状软木塞 | Packaging - Crown corks |
| DIN 6103-2002 | 包装材料.圆柱形塑料软管.同轴多层管.尺寸、材料 | Means of packaging - Flexible cylindrical plastic tubes - Coex multilayer tube; Dimensions, materials |
| DIN 6110-2000 | 包装方法.标称容量212ml、425ml、580ml和720ml的可重复使用的广口瓶 | Means of packaging - Reusable jars with a nominal capacity of 212 ml, 425 ml, 580 ml, 720 ml |
| DIN 6111-2002 | 包装.高压包装件.带不可拆卸分配装置的可重复使用的高压包装件 | Packaging - High-pressure packages - Reusable, with non-removable dispensing facility |
| DIN 6112-2002 | 包装.轻型金属测量容器.插入式REL塑封闭装置的孔径 | Packaging - Light gauge metal containers - Aperture for plug-in REL plastic closures |
| DIN 6120-1-1996 | 可回收使用的包装盒和包装材料标志.塑料包装盒和包装材料.第1部分:图形符号 | Marking of packaging and packaging materials for recycling purposes - Plastics packaging and packaging materials - Part 1: Graphical symbols |
| DIN 6120-2-1996 | 可回收使用的包装盒和包装材料标志.塑料包装盒和包装材料.第2部分:附加标志 | Marking of packaging and packaging materials for recycling purposes - Plastics packaging and packaging materials - Part 2: Supplementary marking |
| DIN 6121-1996 | 包装材料.计量容器标记 | Packaging - Marking of measuring containers |
| DIN 6128-2001 | 包装方法.化妆品用玻璃容器.通用公差 | Means of packaging - Glass containers for cosmetic products - General tolerances |
| DIN 6129-1-1997 | 包装方法.玻璃瓶和玻璃罐.第1部分:自动化生产的瓶子的通用公差 | Means of packaging - Bottles and hollow-ware from glass - Part 1: General tolerances for automatic produced bottles |
| DIN 6129-2-1999 | 包装方法.玻璃瓶和玻璃凹形器皿.第2部分;容量 | Means of packaging - Bottles and hollow-ware from glass - Part 2: Volumes |
| DIN 6130-1980 | 包装方法.塑料瓶和空心体.重量和充满量的一般公差 | Means of packaging; bottles and hollow bodies made of plastics, general tolerances for weight and brimful volume |
| DIN 6141-2000 | 包装材料.纤维板带盖桶.钢制的底和盖 | Packaging - Fibreboard drums - Bottom and lid made of steel |
| DIN 61750-1977 | 纺织品货运包装箱的基本尺寸 | Base sizes of shipping containers for textiles |
| DIN 61751-2-1967 | 第2部分:纺织品、针织男袜和童袜、针织紧身袜裤零售包装尺寸(长 x 宽) | Sizes (width by length) of retail packages of textiles, knitted socks for men and children, knitted tights |
| DIN 61752-7-1974 | 纺织品零售包装尺寸(长 x 宽).第7部分:毛毯和旅行毯 | Sizes (width by length) for retail packages of textiles; blankets and travelling-rugs |
| DIN 6193-1980 | 包装材料.德国式标准3型瓶 | Means of packaging; bottles, german shape standard III |
| DIN 6198-1988 | 包装.瓶.欧洲2型 | Packaging; bottles; Euro 2 |
| DIN 6318-2002 | 卡箍用步进式包装块支座 | Stepped packing blocks as support for clamps |
| DIN 6634-1976 | 包装方法.圆桶用轧制工字钢.尺寸 | Means of Packaging; Rolled I-steel for Drums; Dimensions |
| DIN 6644-2-1987 | 包装材料.钢制鼓形包装容器.带柄锁紧环 | Packaging; steel drums; clamping rings with lever |
| DIN 6644-4-1987 | 包装材料.带波形卷边、可堆垛、带可拆盖的钢制鼓形包装容器 | Packaging; steel drums with full removable head, stackable, with wave beads |
| DIN 6646-2001 | 包装方法.钢制非移动盖和移动盖式鼓形桶.跌落处理 | Means of packaging - Non-removable head (tight head) and removable head (open head) drums made of steel - Drop handle |
| DIN 6647-1-2006 | 包装形式.筒装饮料容器.第1部分:允许工作压力小于3巴、标称容量小于50立升 | Means of packaging - Cylindrical beverage containers - Part 1: Allowable operating pressure up to 3 bar, nominal volume up to 50 litres |
| DIN 6647-2-2006 | 包装形式.筒装饮料容器.第2部分:允许工作压力小于7巴、标称容量小于50立升 | Means of packaging - Cylindrical beverage containers - Part 2: Allowable operating pressure up to 7 bar, nominal volume up to 50 litres |
| DIN 6647-3-2003 | 包装材料.圆柱形饮料桶.第3部分:允许工作压力不超过3巴、标称容量大于100升 | Means of package - Cylindrical beverage containers - Part 3: Allowable operating pressure up to 3 bar, nominal volume greater 100 litres |
| DIN 6647-4-2004 | 包装手段.圆柱形饮料包装盒.第4部分:允许工作压力3巴及以下、标称容量60升及以下的不回收包装 | Means of packaging - Cylindrical beverage containers - Part 4: Non-returnable packaging withallowable operating pressure up to 3 bar, nominal volume up to 60 litres |
| DIN 68255-1979 | 锯材运输包装 | Sawn timber transportation packages |
| DIN 7274-1-1981 | 包装.额定容积为5、10和20升的钢制油桶.尺寸 | Packaging; Steel canisters with nominal volumes of 5, 10 and 20 l; Dimensions |
| DIN 7274-2-1981 | 包装材料.公称容积为5、10 和 20升的钢制油桶.安全性要求和试验 | Packaging; Steel canisters with nominal volumes of 5, 10 and 20 l; Safety requirements and testing |
| DIN 8743-2004 | 包装机械和包装线.时间术语、参数和计算基础 | Packaging machines and packaging lines - Terms of time, parameters and basics of calculation |
| DIN 8782-1984 | 饮料包装技术.与灌装设备及组成机器有关的术语 | Beverage packaging technology; terminology associated with filling plants and their constituent machines |
| DIN 8784-1993 | 饮料灌装和包装技术.基本的与定货有关的设备规范 | Beverage filling and packaging technology; minimum and order related machine specification |
| DIN CEN/TS 14014-2006 | 邮政业务.混合邮件业务.自动邮件处理信件包装的XML定义 | Postal services - Hybrid Mail - XML definition of encapsulation of letters for automated postal handling; English version CEN/TS 14014:2006 |
| DIN CEN/TS 14631-2005 | 邮政服务.容器和包装物的自动鉴别.容器资产编号 | Postal services - Automatic identification of receptacles and containers - Receptacle asset numbering; German version CEN/TS 14631:2005 |
| DIN EN 10333-2005 | 包装用钢.与人和动物用食品、产品和饮料接触的扁平钢制品.镀锡钢 | Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Tin coated steel (tinplate); German version EN 10333:2005 |
| DIN EN 10334-2005 | 包装用钢.与人和动物用食品、产品和饮料接触的扁平钢制品.无涂覆钢(黑钢板) | Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate); German version EN 10334:2005 |
| DIN EN 10335-2005 | 包装用钢.与人和动物用食品、产品和饮料接触的扁平钢制品.非合金电解铬/氧化铬镀钢 | Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel; German version EN 10335:2005 |
| DIN EN 1086-1995 | 食品保护运输袋.袋型选择和涉及包装物的内袋的建议; 德文版本 EN 1086:1995 | Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed; German version EN 1086:1995 |
| DIN EN 12245-2002 | 可运输式储气瓶.全包装合成气瓶; 德文版本 EN 12245:2002 | Transportable gas cylinders - Fully wrapped composite gas cylinders; German version EN 12245:2002 |
| DIN EN 12246-1999 | 托盘和包装用木材的质量分类 | Quality classification of timber used in pallets and packaging; German version EN 12246:1999 |
| DIN EN 12248-1999 | 工业包装用锯切木料.允许偏差和优选尺寸 | Sawn timber used in industrial packaging - Permitted deviations and preferential sizes; German version EN 12248:1999 |
| DIN EN 12257-2002 | 可运输式储气瓶.无缝、环形包装合成气瓶; 德文版本 EN 12257:2002 | Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders; German version EN 12257:2002 |
| DIN EN 12374-1998 | 包装材料.柔性管材.专业术语 | Packaging - Flexible tubes - Terminology; German version EN 12374:1998 |
| DIN EN 12375-1998 | 包装.铝软管.管壁厚度的测定方法 | Packaging - Flexible aluminium tubes - Wall thickness determination method; German version EN 12375:1998 |
| DIN EN 12377-1998 | 包装材料.软管材.封闭体的气密性试验方法 | Packaging - Flexible tubes - Test method for the air tightness of closures; German version EN 12377:1998 |
| DIN EN 12546-3-2000 | 与食品接触的材料和物品.家用保温容器.第3部分:热包装规范 | Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 3: Specification for thermal packs; German version EN 12546-3:2000 |
| DIN EN 12702-2000 | 纸、纸板和包装用及一次性卫生产品用胶粘剂.潜在粘结层成块特性的测定.德文版本EN 12702:2000 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers; German version EN 12702:2000 |
| DIN EN 12703-1999 | 纸、纸板和包装用及一次性卫生制品用胶粘剂.低温柔性和冷脆性的测定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature; German version EN 12703:1999 |
| DIN EN 12704-2000 | 纸、纸板和包装用及一次性卫生产品用胶粘剂.含水胶粘剂起泡性能的测定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation of aqueous adhesives; German version EN 12704:1999 |
| DIN EN 12726-2000 | 包装.软木塞和塞盖用口径为18.5mm的软木塞瓶口部光度 | Packaging - Cork mouth finish with a bore diatmeter of 18,5 mm for corks and tamper evident capsules; German version EN 12726:2000 |
| DIN EN 12960 Berichtigung 1-2007 | 纸和纸板、包装和一次性卫生用品用胶粘剂.耐剪切性的测定.技术勘误DIN EN 12960-2001 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance; German version EN 12960:2001, Corrigenda to DIN EN 12960:2001-06; German version EN 12960:2001/AC:2007 |
| DIN EN 12960-2001 | 纸和纸板、包装和一次性卫生用品用胶粘剂.耐剪切性测定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance; German version EN 12960:2001 |
| DIN EN 13010 Berichtigung 1-2007 | 包装.单件包装.标记板显示的尺寸和要求 | Packaging - Unit packaging - Dimensions and requirements for pegboard display; German version EN 13010:2003, Corrigenda to DIN EN 13010:2003-06 |
| DIN EN 13010-2003 | 包装.单元包装.硬质纤维板显示的尺寸和要求 | Packaging - Unit packaging - Dimensions and requirements for pegboard display; German version EN 13010:2003 |
| DIN EN 13025-1-2006 | 包装.轻型金属容器.第1部分:最大容量40000ml的通用圆形、圆柱形和圆锥形金属容器的标称填装容积 | Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml; German version EN 13025-1:2005 |
| DIN EN 13025-2-2006 | 包装.轻型金属容器.第2部分:20000ml、25000ml和30000ml标称容量的固定盖(紧盖)圆钢和马口铁容器 | Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml; German version EN 13025-2:2005 |
| DIN EN 13025-3-2006 | 包装.轻型金属容器.第3部分:20000ml、25000ml和30000ml标称容量可移动盖(活盖)圆钢和马口铁容器 | Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml; German version EN 13025-3:2005 |
| DIN EN 13026-2001 | 包装.小型金属包装.标称灌注容量不超过30000ml的锥形、圆柱形和非圆形普通金属容器 | Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30000 ml; German version EN 13026:2001 |
| DIN EN 13027-2001 | 包装.小型金属包装.根据标称总装盖容量定义的顶开口圆形罐 | Packaging - Light-gauge metal packaging - Open top round cans defined by their nominal gross-lidded capacity; German version EN 13027:2001 |
| DIN EN 13028-2001 | 包装.轻型金属包装.由公称装填容量限定的加气体饮料用顶开口圆形罐; 德文版本 EN 13028:2001 | Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with added gas, defined by their nominal filling volumes; German version EN 13028:2001 |
| DIN EN 13029-2001 | 包装.薄金属包装.插入式塑料封闭套的孔径 | Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures; German version EN 13029:2001 |
| DIN EN 13045-2000 | 包装.圆柱形塑料软管.尺寸和公差 | Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; German version EN 13045:2000 |
| DIN EN 13046-2000 | 包装.圆柱形金属软管.尺寸和公差 | Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances; German version EN 13046:2000 |
| DIN EN 13047-2000 | 包装.圆锥形金属软管.尺寸和公差 | Packaging - Flexible conical metallic tubes - Dimensions and tolerances; German version EN 13047:2000 |
| DIN EN 13048-2000 | 包装.铝软管.内部清漆薄膜厚度测量方法 | Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method; German version EN 13048:2000 |
| DIN EN 13054-2001 | 包装.完全和满载运输包装件.包装件重心测定方法 | Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package; German version EN 13054:2001 |
| DIN EN 13117-1-2000 | 运输包装.可重复使用硬塑料配送箱.第1部分:通用配送箱 | Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application; German version EN 13117-1:2000 |
| DIN EN 13117-2-2000 | 运输包装.可重复使用的硬塑料配送箱.第2部分:试验的通用规范 | Transport packaging - Reusable, rigid plastics distribution boxes - Part 2: General specifications for testing; German version EN 13117-2:2000 |
| DIN EN 13193-2000 | 包装.包装和环境.术语 | Packaging - Packaging and environment - Terminology; German version EN 13193:2000 |
| DIN EN 13199-1-2000 | 包装.小型货物的载运系统.第1部分:通用要求和试验方法 | Packaging - Small Load Carrier Systems - Part 1: Common requirements and test methods; German version EN 13199-1:2000 |
| DIN EN 13199-2-2000 | 包装.小型货物的载运系统.第2部分:柱形堆朵法 | Packaging - Small Load Carrier Systems - Part 2: Column Stackable System (CSS); German version EN 13199-2:2000 |
| DIN EN 13199-3-2000 | 包装.低负重载运系统.第3部分:联结式叠架 | Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS); German version EN 13199-3:2000 |
| DIN EN 13246-2001 | 包装.捆绑钢带规范 | Packaging - Specification for tensional steel strapping; German version EN 13246:2001 |
| DIN EN 13247-2001 | 包装.道路安全绳索升降梯捆绑钢带规范 | Packaging - Specification for tensional steel strapping for lifting, lashing and securing of loads; German version EN 13247:2001 |
| DIN EN 13393-2001 | 包装.边角保护器规范 | Packaging - Specification for edge protectors; German version EN 13393:2001 |
| DIN EN 13394-2001 | 包装.非金属拉伸箍带规范; 德文版本 EN 13394:2001 | Packaging - Specification for non-metallic tensional strapping; German version EN 13394:2001 |
| DIN EN 13427-2004 | 包装.欧洲标准在包装和包装废弃物领域的使用要求 | Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste; German version EN 13427:2004 |
| DIN EN 13428-2004 | 包装.制造和组成的特定要求.资源减少的防止 | Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction; German version EN 13428:2004 |
| DIN EN 13429-2004 | 包装.重新使用 | Packaging - Reuse; German version EN 13429:2004 |
| DIN EN 13430-2004 | 包装.通过材料再循环评定包装可回收性的要求 | Packaging - Requirements for packaging recoverable by material recycling; German version EN 13430:2004 |
| DIN EN 13431-2004 | 包装.以能量恢复的形式评定包装可回收性的要求(包括最小次热值规范) | Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value; German version EN 13431:2004 |
| DIN EN 13432 Berichtigung 2-2007 | 包装.通过合成和生物降解评定包装可回收性的要求.包装最后验收的试验计划和评估标准.技术勘误DIN EN 13432- | Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging; German version EN 13432:2000, Corrigenda to DIN EN 13432:2000-12, German version EN 13432:2000/AC:2005 |
| DIN EN 13432-2000 | 包装.通过合成和生物降解评定包装可回收性的要求.试验计划和包装最后验收标准的评定 | Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging; German version EN 13432:2000 |
| DIN EN 13437-2004 | 包装和材料回收.回收方法的标准.回收过程和流程图的描述 | Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart; German version EN 13437:2003 |
| DIN EN 13439-2004 | 包装.能量回收率.定义和计算方法 | Packaging - Rate of energy recovery - Definition and method of calculation; German version EN 13439:2003 |
| DIN EN 13440-2004 | 包装.回收率.定义和计算方法 | Packaging - Rate of recycling - Definition and method of calculation; German version EN 13440:2003 |
| DIN EN 13461-2001 | 包装.圆柱形层压软管.尺寸和公差 | Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances; German version EN 13461:2001 |
| DIN EN 13538-3-2002 | 睡袋尺寸特性测定.第3部分:有效容积和易包装性; 德文版本 EN 13538-3:2002 | Determination of dimensional characteristics of sleeping bags - Part 3: Volume under load and easiness of packaging; German version EN 13538-3:2002 |
| DIN EN 13590-2003 | 包装.各种零售商品运输用软包装袋.通用特性及容积和载重量测定的试验方法 | Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity; German version EN 13590:2003 |
| DIN EN 13593-2003 | 包装.家用废弃物收集纸袋.类型、要求和试验方法 | Packaging - Paper sacks for household waste collection - Types, requirements and test methods; German version EN 13593:2003 |
| DIN EN 13626-2003 | 包装.箱式托盘.一般要求和试验方法 | Packaging - Box pallets - General requirements and test methods; German version EN 13626:2003 |
| DIN EN 13628-1-2003 | 包装.软包装材料.用静态气相色谱法测定剩余溶剂.第1部分:绝对法 | Packaging; Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods; German version EN 13628-1:2002 |
| DIN EN 13628-2-2003 | 包装.软包装材料.用静态气相色谱法测定剩余溶剂.第2部分:工业法 | Packaging; Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods; German version EN 13628-2:2002 |
| DIN EN 13920-14-2003 | 铝和铝合金.废料.第14部分:旧的铝制包装件废料 | Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings; German version EN 13920-14:2003 |
| DIN EN 13920-15-2003 | 铝和铝合金.废料.第15部分:去除涂层的用过的铝包装物废料 | Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings; German version EN 13920-15:2003 |
| DIN EN 14045-2003 | 包装.在规定了合成条件的实际定向试验中包装材料分解的评价 | Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions; German version EN 14045:2003 |
| DIN EN 14046-2003 | 包装.组成条件受控的包装材料最大需氧生物降解能力的评价.二氧化碳释放分析的方法 | Packaging - Evaluation of the ultimate aerobic biodegradability of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide; German version EN 14046:2003 |
| DIN EN 14047-2003 | 包装.含水介质中包装材料最终氧化生物降解性测定.二氧化碳分析法 | Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide; German version EN 14047:2002 |
| DIN EN 14048-2003 | 包装.含水介质中包装材料最终氧化生物降解性测定.封闭式呼吸机需氧量测量法 | Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer; German version EN 14048:2002 |
| DIN EN 14053-2003 | 包装.波纹板或实心纤维纸板制成的包装件 | Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction; German version EN 14053:2003 |
| DIN EN 14054-2003 | 包装.纸和纸板包装.纸板箱的设计 | Packaging - Paper and paperboard packaging - Design of cartons; German version EN 14054:2003 |
| DIN EN 14149-2003 | 包装.完全满运输包装件和成组货件.旋转下落的冲击试验 | Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop; German version EN 14149:2003 |
| DIN EN 14182-2003 | 包装.术语.基本术语和定义 | Packaging - Terminology - Basic terms and definitions; German version EN 14182:2002 |
| DIN EN 14287-2004 | 铝和铝合金.生产包装和包装组件用产品的化学组分的特定要求 | Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components; German version EN 14287:2004 |
| DIN EN 14375 Berichtigung 1-2006 | 制药产品用儿童不可重新封盖的药品包装法.要求和试验.对DIN EN 114375-2004的勘误 | Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing; German version EN 14375:2003, Corrigenda to DIN EN 14375:2004-02; German version EN 14375:2003/AC:2006 |
| DIN EN 14375-2004 | 保护儿童的不可重封口的药品包装.要求及试验 | Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing; German version EN 14375:2003 |
| DIN EN 14391-2004 | 包装.可折叠铝管.危险的触摸警告 | Packaging - Collapsible aluminium tubes - Tactile warnings of danger; German version EN 14391:2004 |
| DIN EN 14477-2004 | 柔性包装材料.抗穿透性测定.试验方法 | Packaging, Flexible packaging material - Determination of puncture resistance - Test methods; German version EN 14477:2004 |
| DIN EN 14479-2004 | 柔性包装材料.动态液上气相色谱法测定残留溶剂.绝对测定法 | Packaging, Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography - Absolute method; German version EN 14479:2004 |
| DIN EN 14634-2005 | 玻璃包装.26 H 180冠形盖瓶口.尺寸 | Glass packaging - 26 H 180 crown finish - Dimensions; German version EN 14634:2004 |
| DIN EN 14635-2005 | 玻璃包装.26 H 126冠形盖瓶口.尺寸 | Glass packaging - 26 H 126 crown finish - Dimensions; German version EN 14635:2004 |
| DIN EN 14713-2006 | 纸和纸板、包装和一次性清洁产品用胶粘剂.可能适合粘结的薄膜的摩擦性能测定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding; German version EN 14713:2005 |
| DIN EN 14798-2006 | 玻璃包装.手动冠形开瓶器.尺寸 | Glass packaging - Hand-held crown bottle openers - Dimensions; German version EN 14798:2005 |
| DIN EN 14806-2005 | 包装.在实验室试验中模拟堆肥条件下初步评价包装材料的分解 | Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test; German version EN 14806:2005 |
| DIN EN 14866-2006 | 釉瓷和搪瓷.空气与气体、气体与气体热交换器用蓄热、上釉和包装的板材.规范 | Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications; German version EN 14866:2005 |
| DIN EN 14867-2005 | 包装.塑料冰冻袋.规范和试验方法 | Packaging - Plastic freezer bags - Specifications and test methods; German version EN 14867:2005 |
| DIN EN 14887-2006 | 玻璃包装.开启软木塞设备.一般要求 | Glass packaging - Cork removal devices - General requirements; German version EN 14887:2005 |
| DIN EN 14932-2007 | 塑料.包装带用伸缩性热塑薄膜.要求和试验方法 | Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods; English version of DIN EN 14932:2007-03 |
| DIN EN 14979-2006 | 包装.软塑料/金属层压管.S13喷嘴的尺寸和公差 | Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13 English version of DIN EN 14979:2006-05 |
| DIN EN 15208-2007 | 危险物品的运输罐.密封包装运输系统.工作原理和接口规范 | Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications; German version EN 15208:2007 |
| DIN EN 15385-2007 | 包装.柔性叠层管.测定头部焊接强度的试验方法 | Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding; German version EN 15385:2007 |
| DIN EN 1719-1998 | 纸张和制板、包装材料和卫生制品的粘结剂.压敏性粘接材料粘性的测量.用环钉法测定粘性 | Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack; German version EN 1719:1998 |
| DIN EN 1720-1998 | 纸张和纸板、包装材料和卫生制品的粘结剂.可分散性的测定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability; German version EN 1720:1998 |
| DIN EN 1721-1998 | 纸张和纸板、包装材料和卫生产品的粘结剂.压敏性粘接剂表面粘性的测量.按照滚球法测量表面粘性 | Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack; German version EN 1721:1998 |
| DIN EN 1895 Berichtigung 1-2007 | 包装和一次性卫生制品用纸和纸板胶粘剂.柔性组装的180°"T"型剥离试验.技术勘误DIN EN 1895-2002 | Adhesives for paper and board, packaging and disposable sanitary products - 180°-"T" Peel test for a flexible-to-flexible assembly; German version EN 1895:2001, Corrigenda to DIN EN 1895:2002-02; German version EN 1895:2001/AC:2007 |
| DIN EN 1895-2002 | 包装和一次性卫生制品用纸和纸板胶粘剂.柔性组装的180°"T"型剥离试验 | Adhesives for paper and board, packaging and disposable sanitary products - 180° "T" peel test for a flexible-to-flexible assembly; German version EN 1895:2001 |
| DIN EN 1896-2001 | 纸、纸板、包装和一次性卫生用品用粘结剂.拉伸和抗拉强度的测定 | Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation; German version EN 1896:2001 |
| DIN EN 22206-1993 | 包装.满装的运输包装.试验时包装零件的标识 | Packaging; complete, filled transport packages; identification of parts when testing (ISO 2206:1987); german version EN 22206:1992 |
| DIN EN 22248-1993 | 包装.满装的运输包装.坠落垂直冲击试验 | Packaging; complete, filled transport packages; vertical impact test by dropping (ISO 2248:1985); german version EN 22248:1992 |
| DIN EN 22876-1993 | 包装.满装的运输包装.滚动试验 | Packaging; complete, filled transport packages; rolling test (ISO 2876:1985); german version EN 22876:1992 |
| DIN EN 23-1-1978 | 粉状洗涤剂和清洁剂的包装.纸板盒和圆筒的尺寸和容量 | Packages for washing and cleaning powders; dimensions and volumes of cartons and drums from fibre board |
| DIN EN 24178-1993 | 满装的运输包装.分配尝试.要记录的信息 | Complete, filled transport packages; distribution trials; information to be recorded (ISO 4178:1980); german version EN 24178:1992 |
| DIN EN 24180-1-1993 | 满装的运输包装.性能试验计划编制的一般规则.第1部分:概述 | Complete, filled transport packages; general rules for the compilation of performance test schedules; part 1: general principles (ISO 4180-1:1980); german version EN 24180-1:1992 |
| DIN EN 24180-2-1993 | 满装的运输包装.性能试验计划编制的一般规则.第2部分:定量参数 | Complete, filled transport packages; general rules for the compilation of performance test schedules; part 2: quantitative data (ISO 4180-2:1980); german version EN 24180-2:1992 |
| DIN EN 26590-1-1993 | 包装.包装袋.术语和类型.第1部分:纸袋 | Packaging; sacks; vocabulary and types; part 1: paper sacks (ISO 6590-1:1983); german version EN 26590-1:1992 |
| DIN EN 26590-2-1993 | 包装.包装袋.术语和类型.第2部分:热塑性塑料柔性薄膜袋 | Packaging; sacks; vocabulary and types; part 2: sacks made from thermoplastic flexible film (ISO 6590-2:1986); german version EN 26590-2:1992 |
| DIN EN 26591-1-1993 | 包装.包装袋.说明和测量方法.第1部分:空纸袋 | Packaging; sacks; description and method of measurement; part 1: empty paper sacks (ISO 6591-1:1984); german version EN 26591-1:1992 |
| DIN EN 26591-2-1993 | 包装.包装袋.说明及测量方法.第2部分:热塑柔性薄膜空袋 | Packaging; sacks; description and method of measurement; part 2: empty sacks made from thermoplastic flexible film (ISO 6591-2:1985); german version EN 26591-2:1992 |
| DIN EN 26599-1-1993 | 包装.包装袋.试验条件.第1部分:纸袋 | Packaging; sacks; conditioning for testing; part 1: paper sacks (ISO 6599-1:1983); german version EN 26599-1:1992 |
| DIN EN 27023-1993 | 包装.包装麻袋.试验用空麻袋的取样方法 | Packaging; sacks; method of sampling empty sacks for testing (ISO 7023:1983); german version EN 27023:1992 |
| DIN EN 27965-1-1993 | 包装.包装袋.跌落试验.第1部分:纸袋 | Packaging; sacks; drop test; part 1: paper sacks (ISO 7965-1:1984); german version EN 27965-1:1992 |
| DIN EN 28474-1993 | 包装.满装的运输包装.浸水试验 | Packaging; Complete, filled transport packages; water immersion test (ISO 8474:1986); german version EN 28474:1992 |
| DIN EN 28768-1993 | 包装.满装的运输包装.翻倒试验 | Packaging; complete, filled transport packages; toppling test (ISO 8768:1986); german version EN 28768:1992 |
| DIN EN 29454-1-1994 | 软钎焊剂.分类和要求.第1部分:分类、标记和包装 | Soft soldering fluxes; classification and requirements; part 1: classification, labelling and packaging (ISO 9454-1:1990); German version EN 29454-1:1993 |
| DIN EN 3475-510-2002 | 航空航天系列.航空用电缆.试验方法.第510部分:挤压绝缘护套和包装材料的抗拉强度和延伸率; 德文和英文版本 | Aerospace series - Cables, electrical, aircraft use; Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material; German and English version EN 3475-510:2002 |
| DIN EN 365 Berichtigung 1-2007 | 防人员从高处坠落的保护装置.使用说明、维修、周期检验、修理、标记和包装的一般要求 | Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging; German version EN 365:2004, Corrigenda to DIN EN 365:2004-12; German version EN 365:2004/AC:2006 |
| DIN EN 365-2004 | 防人员从高处坠落的保护装置.使用说明、维修、周期检验、修理、标记和包装的一般要求 | Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging; German version EN 365:2004 |
| DIN EN 415-1-2000 | 包装机械的安全性.第1部分:包装机械和相关设备的术语和分类 | Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment; German version EN 415-1:2000 |
| DIN EN 415-2-2000 | 包装机械的安全性.第2部分:预成形刚性容器包装机 | Safety of packaging machines - Part 2: Pre-formed rigid container packaging machines; German version EN 415-2:1999 |
| DIN EN 415-3-2000 | 包装机械的安全性.第3部分:成型,装填和密封机 | Safety of packaging machines - Part 3: Form, fill and seal machines; German version EN 415-3:1999 |
| DIN EN 415-4-1997 | 包装机械安全性.第4部分:码垛机和散垛机 | Safety of packaging machines - Part 4: Palletisers and depalletisers; German version EN 415-4:1997 |
| DIN EN 415-5-2006 | 包装机械的安全性.第5部分:打包机 | Safety of packaging machines - Part 5: Wrapping machines; English version of DIN EN 415-5:2006-10 |
| DIN EN 415-6-2007 | 包装机械的安全性.第6部分:托盘包装机械 | Safety of packaging machines - Part 6: Pallet wrapping machines; German version EN 415-6:2006 |
| DIN EN 415-7-2006 | 包装机械的安全性.第7部分:组别和二次包装机械 | Safety of packaging machines - Part 7: Group and secondary packaging machines; English version of DIN EN 415-7:2006-10 |
| DIN EN 60191-6-3-2001 | 半导体装置的机械标准化.第6-3部分:表面安装的半导体装置包装外廓图绘制一般规则.包装尺寸测量方法 | Mechanical standardization of semiconductor devices - Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Measuring methods for package dimensions of quat flat packs (QFP) (IEC 60191-6-3:2000); German version EN 60191-6-3:2000 |
| DIN EN 60264-2-1-2004 | 绕组线的包装.第2部分:圆柱形筒装交货线盘.基本尺寸 | Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Basic dimensions (IEC 60264-2-1:1989 + A1:2003); German version EN 60264-2-1:1994 + A1:2003 |
| DIN EN 60264-3-1-2004 | 绕组线的包装.第3-1部分:圆锥形筒装交货线盘.基本尺寸 | Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions (IEC 60264-3-1:1999 + A1:2003); German version EN 60264-3-1:2000 + A1:2003 |
| DIN EN 60264-3-2-2000 | 绕组线的包装.第3-2部分:圆锥形筒装交货线盘.热塑材料可回收线盘规范 | Packaging of windings wires - Part 3-2: Taper barrelled delivery spools; specification for returnable spools made from thermoplastic materials (IEC 60264-3-2:1999); German version EN 60264-3-2:1999 |
| DIN EN 60264-3-4-2000 | 绕组线包装.第3-4部分:锥形筒式线盘.锥形线盘容器基本尺寸 | Packaging of winding wires - Part 3-4: Taper barrelled delivery spools; basic dimensions of containers for taper barrelled delivery spools (IEC 60264-3-4:1999); German version EN 60264-3-4:1999 |
| DIN EN 60264-5-1-2004 | 绕组线的包装.第5-1部分:带圆锥形侧板的圆柱形筒装交货线盘.基本尺寸 | Packaging of winding wires - Part 5-1: Cylindrical barrelled delivery spools with conical flanges - Basic dimensions (IEC 60264-5-1:1997 + A1:2003); German version EN 60264-5-1:1997 + A1:2003 |
| DIN EN 60264-5-2-2002 | 绕组线包装.第5-2部分:圆锥形筒装交货线盘.热塑可回收线盘规范 | Packaging of winding wires - Part 5-2: Cylindrical barelled delivery spools with conical flanges; Specification for returnable spools made from thermoplastic material (IEC 60264-5-2:2001); German version EN 60264-5-2:2001 |
| DIN EN 60286-2-2003 | 自动装运元件的包装.第2部分:元件单向连续编带包装 | Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes (IEC 60286-2:1997 + A1:2002); German version EN 60286-2:1998 + A1:2003 |
| DIN EN 60286-4-1998 | 自动搬运元器件的封装.第4部分:把电子元器件用外壳包封在E型和G型包装中的杆控自动送料装置 | Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of form E and G (IEC 60286-4:1997); German version EN 60286-4:1998 |
| DIN EN 60286-5-2004 | 自动装配用元件的包装.第5部分:矩阵式料盘 | Packaging of components for automatic handling - Part 5: Matrix trays (IEC 60286-5:2003); German version EN 60286-5:2004 |
| DIN EN 60286-6-2004 | 自动装配用元件的包装.第6部分:表面安装组件的散装盒包装 | Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components (IEC 60286-6:2004); German version EN 60286-6:2004 |
| DIN EN 60317-44-1997 | 特种绕组线规范.第44部分:芳族聚酰亚胺包装矩形铜线.240级 | Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 (IEC 60317-44:1997); German version EN 60317-44:1997 |
| DIN EN 61076-4-108-2002 | 电子设备连接器.第4-108部分:经质量评估的印制板连接器.符合 IEC 60917-1 的基本网格为 2.5mm 、具有 25mm | Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 (IEC 61076-4-108:2002); German version EN 61076-4-108:2002 |
| DIN EN 61834-4-1999 | 录制.家用的使用6,35mm磁带螺旋扫描数字音像盒式磁带录像系统(525-60,625-50,1125-60和1250-50系统).第4部 | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 4: Pack header table and contents (IEC 61834-4:1998); German version EN 61834-4:1998 |
| DIN EN 62090-2003 | 电子元器件产品条形码和二维符号包装标签 | Product package labels for electronic components using bar code and two-dimensional symbologies (IEC 62090:2002); German version EN 62090:2003 |
| DIN EN 62137-2005 | 环境和耐久性试验.区域阵列式包装件表面安装板的试验方法FBGA、BGA、FLGA、LGA、SON和QFN | Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN (IEC 62137:2004 + Corrigendum:2005); German version EN 62137:2004 |
| DIN EN 62148-1-2003 | 光纤有源元件及器件.包装和接口标准.第1部分:总则和指南 (IEC 62148-1:2002); 德文版本 EN 62148-1:2002 | Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance (IEC 62148-1:2002); German version EN 62148-1:2002 |
| DIN EN 62148-10-2003 | 光纤有源元件及器件.包装和接口标准.第10部分:SFF MU双20针无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 10: SFF MU duplex 20-pin transceivers (IEC 62148-10:2003); German version EN 62148-10:2003 |
| DIN EN 62148-11-2004 | 纤维光学有源元件及器件.包装和接口标准.第14部分:14针集成调制器激光二极管发射器 | Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters (IEC 62148-11:2003); German version EN 62148-11:2003 |
| DIN EN 62148-12-2004 | 光纤有源元件及器件.包装和接口标准.第12部分:带同轴RF连接器的激光发射机 | Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with coaxial RF connector (IEC 62148-12:2004); German version EN 62148-12:2004 |
| DIN EN 62148-2-2003 | 光纤有源元件及器件.包装和接口标准.第2部分:SFF MT-RJ 10针无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 2: SFF MT-RJ 10-pin transceivers (IEC 62148-2:2003); German version EN 62148-2:2003 |
| DIN EN 62148-3-2003 | 光纤有源元件及器件.包装和接口标准.第3部分:SFF MT-RJ 20针无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 3: SFF MT-RJ 20-pin transceivers (IEC 62148-3:2003); German version EN 62148-3:2003 |
| DIN EN 62148-4-2004 | 纤维光学有源元件及器件.包装和接口标准.第4部分:PN 1x9塑料光纤无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 4: PN 1x9 plastic optical fibre transceivers (IEC 62148-4:2003); German version EN 62148-4:2003 |
| DIN EN 62148-5-2003 | 光纤有源元件及器件.包装和接口标准.第5部分:SC 1x9光纤模数 | Fibre optic active components and devices - Package and interface standards - Part 5: SC 1x9 fibre optic modules (IEC 62148-5:2003); German version EN 62148-5:2003 |
| DIN EN 62148-6-2004 | 纤维光学有源元件及器件.包装和接口标准.第6部分:ATM-PON无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers (IEC 62148-6:2003); German version EN 62148-6:2003 |
| DIN EN 62148-7-2003 | 纤维光学有源元件及器件.包装和接口标准.第7部分:SFF LC 10针无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 7: SFF LC 10-pin transceivers (IEC 62148-7:2003); German version EN 62148-7:2003 |
| DIN EN 62148-8-2003 | 光纤有源元件及器件.包装和接口标准.第8部分:SFF LC 20针无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 8: SFF LC 20-pin transceivers (IEC 62148-8:2003); German version EN 62148-8:2003 |
| DIN EN 62148-9-2003 | 光纤有源元件及器件.包装和接口标准.第9部分:SFF MU双10针无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 9: SFF MU duplex 10-pin transceivers (IEC 62148-9:2003); German version EN 62148-9:2003 |
| DIN EN 76-1979 | 某些预包装食品的包装.玻璃和金属包装容器的容量 | Packages for certain prepacked foodstuffs; capacities of glass and metal containers |
| DIN EN 862-2006 | 包装.防止儿童打开的包装.非药物用不可再封闭的包装要求和试验过程.德文版本EN 862-2005 | Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products; German version EN 862:2005 |
| DIN EN 868-10-2000 | 要进行消毒的医疗器械系统和包装材料.第9部分:用于生产可热密封的袋、卷轴和盖子的聚烯烃涂胶非织物材料.要 | Packaging materials and systems for medical devices which are to be sterilized - Part 10: Adhesive coated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids; requirements and test methods; German version EN 868-10:2000 |
| DIN EN 868-2-1999 | 计划进行消毒医疗装置的包装材料和包装系统.第2部分:消毒包装.要求和检验方法 | Packaging materials and systems for medical devices which are be sterilized - Part 2: Sterilization wrap; requirements and test methods; German version EN 868-2:1999 |
| DIN EN 868-3-1999 | 计划进行消毒医疗装置的包装材料和包装系统.第3部分:生产纸袋用的纸(EN 868-4中的规定)和生产穿孔带纸和卷 | Packaging materials and systems for medical devices which are to be sterilized - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5); requirements and test methods; German version EN 868-3:1999 |
| DIN EN 868-4-1999 | 计划进行消毒的医疗装置用的包装材料和包装系统.第4部分:纸袋.要求和试验方法 | Packaging materials and systems for medical devices which are to be sterilized - Part 4: Paper bags; requirements and test methods; German version EN 868-4:1999 |
| DIN EN 868-5-2002 | 消毒医疗设备用包装材料和设备.第5部分:纸和塑料薄膜制热封装和自封装袋和卷轴.要求和试验方法 | Packaging materials and systems for medical devices which are to be sterilized - Part 5: Heat and self-sealable pouches and reels of paper and plastic film construction; Requirements and test methods; German version EN 868-5:1999 + AC:2001 |
| DIN EN 868-6-1999 | 计划进行消毒医疗产品的包装材料和包装系统.第6部分:用环氧乙烷或射线进行消毒时使用的医药包装品生产用的 | Packaging materials and systems for medical devices which are to be sterilized - Part 6: Paper for the manufacture of packs for medical use for sterilization by ethylene oxide or irradiation; requirements and test methods; German version EN 868-6:1999 |
| DIN EN 868-7-1999 | 计划进行消毒医疗装置的包装材料和包装系统.第7部分:用环氧乙烷或射线方法进行消毒时使用的可热密封的医药 | Packaging materials and systems for medical devices which are to be sterilized - Part 7: Adhesive coated paper for the manufacture of heat sealable packs for medical use for sterilization by ethylene oxide or irradiation; requirements and test methods; German version EN 868-7:1999 |
| DIN EN 868-8-1999 | 计划进行消毒医疗装置的包装材料和包装系统.第8部分:符合EN 285的蒸气消毒器的可重复使用的消毒罐.要求和试 | Packaging materials and systems for medical devices which are to be sterilized - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285; requirements and test methods; German version EN 868-8:1999 |
| DIN EN 868-9-2000 | 要消毒的医疗装置系统和包装材料.第9部分:用于生产可热密封的袋,卷轴和盖子的聚烯烃未涂覆非织物材料.要求 | Packaging materials and systems for medical devices which are to be sterilized - Part 9: Uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lids; requirements and tests methods; German version EN 868-9:2000 |
| DIN EN ISO 10303-210-2002 | 工业自动化系统和集成.产品数据表示和信息交换.第210部分:应用协议:电子组件、互连和包装设计 | Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnected and packaging design (ISO 10303-210:2001); German version EN ISO 10303-210:2002, text in English |
| DIN EN ISO 10442-2005 | 石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002); English version EN ISO 10442:2002 |
| DIN EN ISO 11607-1 Berichtigung 1-2007 | 最终灭菌医学设备的封装.第1部分:原材料、无菌阻隔系统和包装系统的要求 | Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006); German version EN ISO 11607-1:2006, Corrigenda to DIN EN ISO 11607-1:2006-07 |
| DIN EN ISO 11607-1-2006 | 终端无菌医学设备的包装.第1部分:原材料、消毒阻挡系统和包装的要求(ISO 11607-1:2006) | Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006) English version of DIN EN ISO 11607-1:2006-07 |
| DIN EN ISO 11607-2-2006 | 最后灭菌的医疗器械的包装.第2部分:组成、密封和装配过程的确认和要求(ISO 11607-2:2006) | Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006) English version of DIN EN ISO 11607-2:2006-07 |
| DIN EN ISO 11683-1997 | 包装.触摸危险标记.要求 | Packaging - Tactile warnings of danger - Requirements (ISO 11683:1997); German version EN ISO 11683:1997 |
| DIN EN ISO 11897-2001 | 包装.热塑软薄膜制袋.折边撕裂扩展试验 | Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds (ISO 11897:1999); German version EN ISO 11897:2001 |
| DIN EN ISO 12048-2001 | 包装.满运输包装件.利用压缩试验机进行压缩试验和堆积试验 | Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994); German version EN ISO 12048:2000 |
| DIN EN ISO 13355-2003 | 包装.满装的运输包装和单元货物.随机垂直振动试验 | Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test (ISO 13355:2001); German version EN ISO 13355:2003 |
| DIN EN ISO 15119-2004 | 包装.袋.添装袋的摩擦测定 | Packaging - Sacks - Determination of the friction of filled sacks (ISO 15119:2000); German version EN ISO 15119:2004 |
| DIN EN ISO 15378-2007 | 药品的主要包装材料.以良好加工实践(GMP)为参考ISO 9001-2000应用的特殊要求 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2006); German and English version EN ISO 15378:2007 |
| DIN EN ISO 16101-2004 | 包装.危险货物的运输包装.塑料的兼容性试验 | Packaging - Transport packaging for dangerous goods - Plastics compatibility testing (ISO 16101:2004); German version EN ISO 16101:2004 |
| DIN EN ISO 16103-2005 | 包装.危险物品的运输包装.再循环的塑料 | Packaging - Transport packaging for dangerous goods - Recycled plastics material (ISO 16103:2005); German version EN ISO 16103:2005 |
| DIN EN ISO 16104-2003 | 包装.危险品的运输包装.试验方法 | Packaging - Transport packaging for dangerous goods - Tests methods (ISO 16104:2003); German version EN ISO 16104:2003 |
| DIN EN ISO 16106-2006 | 包装.危险货品运输包装.危险货物包装、中间散货容器(IBCs)和大型包装.应用ISO 9001的指南 | Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 (ISO 16106:2006); English version of DIN EN ISO 16106:2006-06 |
| DIN EN ISO 16467-2003 | 包装.危险物品的运输包装.IBCs试验方法 | Packaging - Transport packaging for dangerous goods - Test methods for IBCs (ISO 16467:2003); German version EN ISO 16467:2003 |
| DIN EN ISO 21898-2005 | 包装.非危险货物用软的过渡性散货集装箱(FIBCs) | Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO 21898:2004); German version EN ISO 21898:2005 |
| DIN EN ISO 2233-2001 | 包装.满运输包装和单位负载.试验条件 | Packaging - Complete, filled transport packages and unit loads - Conditioning for testing (ISO 2233:2000); German version EN ISO 2233:2001 |
| DIN EN ISO 2234-2002 | 包装.满载的运输包装及成组装运.使用静载荷法堆积试验 (ISO 2234:2000); 德文版本 EN ISO 2234:2002 | Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load (ISO 2234:2000); German version EN ISO 2234:2002 |
| DIN EN ISO 2244-2002 | 包装.满载的运输包装及成组装运.水平冲击试验 (ISO 2244:2000); 德文版本 EN ISO 2244:2002 | Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests (ISO 2244:2000); German version EN ISO 2244:2002 |
| DIN EN ISO 2247-2002 | 包装.满载的运输包装及成组装运.固定低频率振动试验 (ISO 2247:2000); 德文版本 EN ISO 2247:2002 | Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency (ISO 2247:2000); German version EN ISO 2247:2002 |
| DIN EN ISO 23667-2007 | 包装.危险物品的运输包装.硬性塑料和塑料合成IBCs.兼容性测试 | Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing (ISO 23667:2007); German version EN ISO 23667:2007 |
| DIN EN ISO 2873-2002 | 包装.满载的运输包装及成组装运.低压试验 (ISO 2873:2000); 德文版本 EN ISO 2873:2002 | Packaging - Complete, filled transport packages and unit loads - Low pressure test (ISO 2873:2000); German version EN ISO 2873:2002 |
| DIN EN ISO 2875-2003 | 包装.完整满装运输包装件和单元货载.喷水试验 | Packaging - Complete, filled transport packages and unit loads - Water-spray test (ISO 2875:2000); German version EN ISO 2875:2002 |
| DIN EN ISO 7711-1-1998 | 牙科旋转器械.金刚钻器具.第1部分:尺寸、要求、标记和包装 | Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997); German version EN ISO 7711-1:1998 |
| DIN EN ISO 780-1999 | 包装.货物搬运用图形标志 | Packaging - Pictorial marking for the handling of goods (ISO 780:1997); German version EN ISO 780:1999 |
| DIN EN ISO 7965-2-1996 | 包装.袋.跌落试验.第2部分:柔性热塑簿膜包装袋 | Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film (ISO 7965-2:1993); German version EN ISO 7965-2:1996 |
| DIN EN ISO 801-3-1996 | 纸浆.成批销售重量测定.第3部分:大宗包装 | Pulps - Determination of saleable mass in lots - Part 3: Unitized baled (ISO 801-3:1994); German version EN ISO 801-3:1996 |
| DIN EN ISO 8317 Berichtigung 1-2005 | 防儿童拆开的包装.可再次包装件的要求和试验程序 | Child-resistant packaging - Requirements and testing procedures for reclosable packages (ISO 8317:2003); German version EN ISO 8317:2004, Corrigenda to DIN EN ISO 8317:2004-11; German version EN ISO 8317:2004/AC:2005 |
| DIN EN ISO 8317-2004 | 防儿童拆开的包装.可再次包装的要求和试验程序 | Child-resistant packaging - Requirements and testing procedures for reclosable packages (ISO 8317:2003); German version EN ISO 8317:2004 |
| DIN EN ISO 8318-2002 | 包装.满载的运输包装及成组装运.采用可变频的正弦振动试验 (ISO 8318:2000); 德文版本 EN ISO 8318:2002 | Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000); German version EN ISO 8318:2002 |
| DIN EN ISO 8351-1-1996 | 包装.袋.分类方法.第1部分:纸袋 | Packaging - Method of specification for sacks - Part 1: Paper sacks (ISO 8351-1:1994); German version EN ISO 8351-1:1996 |
| DIN EN ISO 8351-2-1996 | 包装.袋.分类方法.第2部分:热塑软薄膜包装袋 | Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8351-2:1994); German version EN ISO 8351-2:1996 |
| DIN EN ISO 8367-1-1996 | 包装.普通包装袋尺寸公差.第1部分:纸袋 | Packaging - Dimensional tolerances for general purpose sacks - Part 1: Paper sacks (ISO 8367-1:1993); German version EN ISO 8367-1:1996 |
| DIN EN ISO 8367-2-1996 | 包装.普通包装袋尺寸公差.第2部分:热塑薄膜袋 | Packaging - Dimensional tolerances for general purpose sacks - Part 2: Sacks made from thermoplastic flexible film (ISO 8367-2:1993); German version EN ISO 8367-2:1996 |
| DIN ISO 10531-2000 | 包装.满装的运输包装.单元货物稳定性试验 | Packaging - Complete, filled transport packages - Stability testing of unit loads (ISO 10531:1992) |
| DIN ISO 8115-3-1997 | 大包.第3部分:棉花包.包装和标签 | Bales - Part 3: Bales of cotton, packaging and labelling (ISO 8115-3:1995) |
| DIN-Fachbericht CEN/TR 14520-2007 | 包装.再利用.再利用系统性能评价方法 | Packaging - Reuse - Methods for assessing the performance of a reuse system; German version CEN/TR 14520:2007 |
| 编号 | 中文名称 | 英文名称 |