| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 60264-1-1968 | 绕组线的包装 第1部分:圆绕组线容器 | Packaging of winding wires. Part 1 : Containers for round winding wires |
| IEC 60264-2-1 AMD 1-2003 | 绕组线的包装.第2-1部分:圆柱形筒装交货线盘.基本尺寸.修改件1 | Packaging of winding wires - Part 2-1: Cylindrical barrelled delivery spools; Basic dimensions; Amendment 1 |
| IEC 60264-2-1-1989 | 绕组线的包装 第2部分:圆柱形筒装交货线盘 第1节:基本尺寸 | Packaging of winding wires; part 2: cylindrical barrelled delivery spools; section one; basic dimensions |
| IEC 60264-2-2 AMD 1-2003 | 绕组线的包装.第2-2部分:圆柱形筒装交货线盘.热塑性材料制可回收线盘规范.修改件1 | Packaging of winding wires - Part 2-2: Cylindrical barrelled delivery spools - Specification for returnable spools made from thermoplastic material; Amendment 1 |
| IEC 60264-2-2-1990 | 绕组线的包装 第2部分:圆柱形筒装交货线盘 第2节:热塑性材料可回收线盘规范 | Packaging of winding wires; part 2: cylindrical barrelled delivery spools; section 2: specification for returnable spools made from thermoplastic material |
| IEC 60264-2-3 AMD 1-2003 | 绕组线的包装.第2-3部分:圆柱形筒装交货线盘.热塑性材料制不可回收线盘规范.修改件1 | Packaging of winding wires - Part 2-3: Cylindrical barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material; Amendment 1 |
| IEC 60264-2-3-1990 | 绕组线的包装 第2部分:圆柱形筒装交货线盘 第3节:热塑性材料不可回收线盘规范 | Packaging of winding wires; part 2: cylindrical barrelled delivery spools; section 3: specification for non-returnable spools made from thermoplastic material |
| IEC 60264-3-1 AMD 1-2003 | 绕组线的包装.第3-1部分:圆锥形筒装交货线盘.基本尺寸.修改件1 | Packaging of winding wires - Part 3-1: Taper barrelled delivery spools; Basic dimensions; Amendment 1 |
| IEC 60264-3-1-1999 | 绕组线的包装 第3-1部分:圆锥形筒装交货线盘 基本尺寸 | Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions |
| IEC 60264-3-2-1999 | 绕组线的包装 第3-2部分:圆锥型筒装交货线盘 热塑性材料可回收线盘规范 | Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials |
| IEC 60264-3-3 AMD 1-2003 | 绕组线的包装.第3-3部分:圆锥形筒装交货线盘.热塑性材料制不可回收线盘规范.修改件1 | Packaging of winding wires - Part 3-3: Taper barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material; Amendment 1 |
| IEC 60264-3-3-1990 | 绕组线的包装 第3部分:圆锥形筒装交货线盘 第3节:热塑性材料不可回收线盘规范 | Packaging of winding wires; part 3: taper barrelled delivery spools; section 3: specification for non-returnable spools made from thermoplastic material |
| IEC 60264-3-4-1999 | 绕组线的包装 第3-4部分:圆锥形筒装交货线盘 圆锥形筒装交货线盘容器的基本尺寸 | Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools |
| IEC 60264-3-5-1999 | 绕组线的包装 第3-5部分:圆锥形筒装交货线盘 热塑性材料线盘线筒规范 | Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material |
| IEC 60264-4-1-1997 | 绕组线的包装 第4-1部分:试验方法 热塑性材料交货线盘 | Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials |
| IEC 60264-4-2 AMD 1-2003 | 绕组线的包装.第4-2部分:试验方法.热塑性材料制锥形筒装交货线盘容器.修改件1 | Packaging of winding wires - Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools; Amendment 1 |
| IEC 60264-4-2-1992 | 绕组线的包装 第4部分:试验方法 第2节:热塑性材料锥形筒装交货线盘容器 | Packaging of winding wires; part 4: methods of test; section 2: containers made from thermoplastic material for taper barrelled delivery spools |
| IEC 60264-5-1 AMD 1-2003 | 绕组线的包装.第5-1部分:带圆锥形侧板的圆柱形筒装交货线盘.基本尺寸.修改件1 | Packaging of winding wires - Part 5-1: Cylindrical barrelled delivery spools with conical flanges; Basic dimensions; Amendment 1 |
| IEC 60264-5-1-1997 | 绕组线的包装 第5-1部分:带圆锥形侧板的圆柱形筒装交货线盘 基本尺寸 | Packaging of winding wires - Part 5-1: Cylindrical barrelled delivery spools with conical flanges - Basic dimensions |
| IEC 60264-5-2-2001 | 绕组线的包装 第5-2部分：带圆锥形侧板的圆柱形筒装交货线盘 垫塑材料制可回收线盘规范 | Packaging of winding wires - Part 5-2: Cylindrical barrelled delivery spools with conical flanges; Specification for returnable spools made from thermoplastic material |
| IEC 60286-1-1997 | 自动装配用元件的包装 第1部分:具有轴向引线的元件在连续编带上的带式包装 | Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes |
| IEC 60286-2 AMD 1-2002 | 自动装配用元件的包装.第2部分:具有单向引线的元件在连续编带上的带式包装.修改件1 | Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes; Amendment 1 |
| IEC 60286-2-1997 | 自动装配用元件的包装 第2部分:具有单向引线的元件在连续编带上的带式包装 | Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes |
| IEC 60286-3-2007 | 自动处理用元件的包装.第3部分:表面装配元件在连续传送带上的包装 | Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes |
| IEC 60286-5-2003 | 自动装配用元件的包装.第5部分:矩阵式料盘 | Packaging of components for automatic handling - Part 5: Matrix trays |
| IEC 60286-6-2004 | 自动化处理用组件的包装.第6部分:表面安装组件的散装箱包装 | Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components |
| IEC 60512-11-13-2002 | 电子设备连接器.试验和测量.第11-13部分:气候试验.试验11n:无钎焊包装连接的气密性 | Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests; Test 11n: Gas tightness, solderless wrapped connections |
| IEC 61076-4-108-2002 | 电子设备连接器.第4-108部分:有质量评定的印制板连接器.符合IEC 60917-1的基本网格为2.5mm、有25mm模数间距 | Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality; Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| IEC 61193-2-2007 | 质量评估系统.第2部分:电子元件和包装件检验用抽样检验方法的选择和使用 | Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages |
| IEC 61834-4-1998 | 录音 用户用(525-60、625-50、1125-60和1250-50系统)6.35mm磁带的螺旋扫描数字视频盒式录音系统 第4部分:包 | Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 4: Pack header table and contents |
| IEC 62090-2002 | 使用条形码和二维符号的电子元器件用产品包装标签 | Product package labels for electronic components using bar code and two-dimensional symbologies |
| IEC 62137-2005 | 环境和耐用试验.区域阵列式包装件表面安装板的试验方法FBGA、BGA、FLGA、LGA、SON和QFN | Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN |
| IEC 62148-1-2002 | 光纤有源元件及器件.包装和接口标准.第1部分:总则和指南 | Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance |
| IEC 62148-10-2003 | 光纤有源元件及器件.包装和接口标准.第10部分:SFF MU双20针无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 10: SFF MU duplex 20-pin transceivers |
| IEC 62148-11-2003 | 光纤有源元件及器件.包装和接口标准.第11部分:14针调制器集成激光二极管发射机 | Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters |
| IEC 62148-12-2004 | 纤维光学有源元件和器件.包装和接口标准.第12部分:带同轴RF连接器的激光传输器 | Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector |
| IEC 62148-2 Corrigendum 1-2003 | 纤维光学有源元件和器件.包装和接口标准.第2部分:SFF MT-RJ 10针无线电收发信机 | Fibre optic active components and devices - Package interface standards - Part 2: SFF MT-RJ 10-pin transceivers |
| IEC 62148-2-2003 | 光纤有源元件及器件.包装和接口标准.第2部分:SFF MT-RJ 10针无线电收发信机 | Fibre optic active components and devices - Package interface standards - Part 2: SFF MT-RJ 10-pin transceivers |
| IEC 62148-3-2003 | 光纤有源元件及器件.包装和接口标准.第3部分:SFF MT-RJ 20针无线电收发信机 | Fibre optic active components and devices - Package interface standards - Part 3: SFF MT-RJ 20-pin transceivers |
| IEC 62148-4-2003 | 光纤有源元件及器件.包装和接口标准.第4部分:PN1 9塑料光学无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 4: PN 1 × 9 plastic optical transceivers |
| IEC 62148-5-2003 | 光纤有源元件及器件.包装和接口标准.第5部分:SC 1光纤模数 | Fibre optic active components and devices - Package and interface standards - Part 5: SC 1×9 fibre optic modules |
| IEC 62148-6-2003 | 纤维光学有源元件和器件.包装和接口标准.第6部分:ATM-PON无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers |
| IEC 62148-7-2003 | 光纤有源元件及器件.包装和接口标准.第7部分:SFF LC 10针无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 7: SFF LC 10-pin transceivers |
| IEC 62148-8-2003 | 光纤有源元件及器件.包装和接口标准.第8部分:SFF LC 20针无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 8: SFF LC 20-pin transceivers |
| IEC 62148-9 Corrigendum 1-2003 | 纤维光学有源元件和器件.包装和接口标准.第9部分:SFF MU双工10针无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 9: SFF MU duplex 10-pin transceivers |
| IEC 62148-9-2003 | 光纤有源元件及器件.包装和接口标准.第9部分:SFF MU双10针无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 9: SFF MU duplex 10-pin transceivers |
| IEC/PAS 62169 Edition 1.0-2000 | 处理、包装、船用和潮湿/回流敏感表面固定装置的标准 | Standard for handling, packing, shipping and use of moisture/reflow sensitive surface mount devices |
| IEC/PAS 62169-2000 | 对湿敏/逆流敏表面安装器件的处置、包装、发货和使用的标准 | Standard for handling, packing, shipping and use of moisture/reflow sensitive surface mount devices |
| IEC/TR 62258-3-2005 | 半导体压模产品.第3部分:搬运、包装和储存的良好实施规程建议 | Semiconductor die products - Part 3: Recommendations for good practice in handling, packing and storage |
| ISO 10303-210-2001 | 工业自动化系统和集成 产品数据表示和交换 第210部分： 应用协议：电子安装、互连和包装设计 | Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnection, and packaging design |
| ISO 10303-232-2002 | 工业自动化系统和集成.产品数据表示和交换.第232部分:应用协议.技术数据包装核心信息和交换 | Industrial automation systems and integration - Product data representation and exchange - Part 232: Application protocol: Technical data packaging core information and exchange |
| ISO 10310-1995 | 神经外科植入物 可植入神经刺激器的标记和包装 | Neurosurgical implants - Marking and packaging of implantable neural stimulators |
| ISO 10442-2002 | 石油、化学和气体设备工业.包装的整体式齿轮分离空气压缩机 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors |
| ISO 10531-1992 | 包装 满装的运输包装 单元货物稳定性试验 | Packaging; complete, filled transport packages; stability testing of unit loads |
| ISO 11607-1-2006 | 终端无菌医学设备的包装.第1部分:材料、消毒阻挡系统和包装系统的要求 | Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| ISO 11607-2-2006 | 终端无菌医学设备的包装.第2部分:组成、密封和装配过程的确认要求 | Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes |
| ISO 11683-1997 | 包装 触摸危险标志 要求 | Packaging - Tactile warnings of danger - Requirements |
| ISO 11897-1999 | 包装 热塑柔性薄膜袋 折边处的撕裂扩展试验 | Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds |
| ISO 12048-1994 | 包装 满装的运输包装 使用压力试验机的压力试验和堆积试验 | Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester |
| ISO 1215-1986 | 商品干燥原软木、软木栓皮碎料、软木废物和软木残渣 定义和包装 | Commercially dry virgin cork, ramassage, gleanings, corkwood refuse and corkwaste; Definitions and packaging |
| ISO 1216-1998 | 软木板 分级 分类和包装 | Corkwood in planks - Grading, classification and packing |
| ISO 12807-1996 | 放射性物质安全运输包装的泄漏检验 | Safe transport of radioactive materials - Leakage testing on packages |
| ISO 13302-2003 | 感官分析.由包装引起的食品味道改变的评定方法 | Sensory analysis - Methods for assessing modifications to the flavours of foodstuffs due to packaging |
| ISO 13355-2001 | 包装 满装的运输包装和单元货物 随机垂直振动试验 | Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test |
| ISO 13503-2-2006 | 石油和天然气工业.完井液和材料.第2部分:高压水砂破裂法和砾石包装作业用支撑剂性能测定 | Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations |
| ISO 13503-4-2006 | 石油和天然气工业.完井液和材料.第4部分:在静态条件下测量外部碰击和砂砾包装液体泄露程序 | Petroleum and natural gas industries - Completion fluids and materials - Part 4: Procedure for measuring stimulation and gravel-pack fluid leakoff under static conditions |
| ISO 13631-2002 | 石油和天然气工业.包装用往复式气体压缩机 | Petroleum and natural gas industries - Packaged reciprocating gas compressors |
| ISO 1434-1995 | 成包天然橡胶 包装量测定 | Natural rubber in bales - Amount of bale coating - Determination |
| ISO 14535-2001 | 摄影 电子扫描仪及成像胶片和像纸卷的室光负载包装 尺寸及有关要求 | Photography - Room-light loading packages for electronic scanners and image-setting film and paper rolls - Dimensions and related requirements |
| ISO 14850-1-2004 | 核能.废弃物包装件的活性测量.第1部分:带公开几何条件的整体模型中的高分辨率γ光谱测定法 | Nuclear energy - Waste-packages activity measurement - Part 1: High-resolution gamma spectrometry in integral mode with open geometry |
| ISO 14968-1999 | 纸和纸板 办公室用纸的切割尺寸 每个包装中纸页卷曲的测量 | Paper and board - Cut-size office paper - Measurement of curl in a pack of sheets |
| ISO 15119-2000 | 包装.袋.已填充袋摩擦系数的测定 | Packaging - Sacks - Determination of the friction of filled sacks |
| ISO 15378-2006 | 药品的主要包装材料.以优秀制造实践为基准对ISO 9001:2000应用的特殊要求 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) |
| ISO 15394-2000 | 包装 航运、运输和可接受标签的两维符号和条码 | Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels |
| ISO 15676-2005 | 心血管外科植入物和人造器官.心肺分流术和体外膜肺氧合(ECMO)用一次性导管包装的要求 | Cardiovascular implants and artificial organs - Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO) |
| ISO 15750-1-2002 | 包装.钢筒.第1部分:最小总容量为 208 l, 210 l and 216.5 l的通口柱桶 | Packaging - Steel drums - Part 1: Removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l |
| ISO 15750-2-2002 | 包装.钢筒.第2部分:最小总容量为 212 l, 216,5 l 和 230 l的密封盖圆筒 | Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l |
| ISO 15750-3-2002 | 包装.钢筒.第3部分:钢桶用插入法兰型密封系统 | Packaging - Steel drums - Part 3: Inserted flange-type closure systems |
| ISO 16101-2004 | 包装.危险货物的运输包装.塑料兼容性试验 | Packaging - Transport packaging for dangerous goods - Plastics compatibility testing |
| ISO 16103-2005 | 包装.危险物品的运输包装.再生塑料材料 | Packaging - Transport packaging for dangerous goods - Recycled plastics material |
| ISO 16104-2003 | 包装.危险物品的运输包装.试验方法 | Packaging - Transport packaging for dangerous goods - Test methods |
| ISO 16106-2006 | 包装.危险货品运输包装.危险货物包装、中间散货容器(IBCs)和大型包装.应用ISO 9001的指南 | Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 |
| ISO 16467-2003 | 包装.危险品用运输包装件.IBCs用试验方法 | Packaging - Transport packages for dangerous goods - Test methods for IBCs |
| ISO 16883-2007 | 包装.危险物品运输包装件.大包装试验方法 | Packaging - Transport packages for dangerous goods - Test methods for large packagings |
| ISO 1749-1973 | 航空器 弹性密封圈 包装和识别 | Aircraft; Elastomeric sealing rings; Packaging and identification |
| ISO 1997-1992 | 粒状软木和软木粉 分类、性质和包装 | Granulated cork and cork powder; classification, properties and packing |
| ISO 20299-1-2006 | 橡胶包包装用薄膜.第1部分:丁二烯橡胶(BR)和丁苯橡胶(SBR) | Film for wrapping rubber bales - Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR) |
| ISO 20299-2-2006 | 橡胶包包装用薄膜.第2部分:天然橡胶 | Film for wrapping rubber bales - Part 2: Natural rubber |
| ISO 20848-1-2006 | 包装.塑料桶.第1部分:标称容量113.6 L～220 L的可拆盖圆桶 | Packaging - Plastics drums - Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l |
| ISO 20848-2-2006 | 包装.塑料桶.第2部分:标称容量208.2 L～220 L的固定盖(密封盖)圆桶 | Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l |
| ISO 20848-3-2006 | 包装.塑料圆筒.第3部分:标称容量113.6 L～220 L塑料圆桶的塞子/桶孔闭合系统 | Packaging - Plastics drums - Part 3: Plug/bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l |
| ISO 21067-2007 | 包装.词汇 | Packaging - Vocabulary |
| ISO 21898-2004 | 包装.非危险货物用软的过渡性散货集装箱 | Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods |
| ISO 2206-1987 | 包装 满装的运输包装 试验时包装件的标识 | Packaging; Complete, filled transport packages; Identification of parts when testing |
| ISO 2219-1989 | 热绝缘用的膨胀纯集成软木 特性、取样和包装 | Expanded pure agglomerated cork for thermal insulation; characteristics, sampling and packaging |
| ISO 2233-2000 | 包装 满装的运输包装和单元货物 试验条件 | Packaging - Complete, filled transport packages and unit loads - Conditioning for testing |
| ISO 2234-2000 | 包装 满装的运输包装和单元货物 静载荷法堆积试验 | Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load |
| ISO 2244-2000 | 包装 满装的运输包装和单元货物 水平冲击试验 | Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests |
| ISO 2247-2000 | 包装 满装的运输包装和单元货物 固定低频率振动试验 | Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency |
| ISO 2248-1985 | 包装 满装的运输包装 坠落垂直冲击试验 | Packaging; Complete, filled transport packages; Vertical impact test by dropping |
| ISO 22715-2006 | 化妆品.包装和标签 | Cosmetics - Packaging and labelling |
| ISO 22742-2005 | 包装.产品包装用线形条码和二维符号 | Packaging - Linear bar code and two-dimensional symbols for product packaging |
| ISO 23667-2007 | 包装.危险货物的运输包装.硬质塑料和塑料合成的IBCs.兼容性测试 | Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing |
| ISO 2855-1976 | 放射性物质 包装 内容物和辐射泄漏检验 | Radioactive materials; Packagings; Test for contents leakage and radiation leakage |
| ISO 2873-2000 | 包装 满装的运输包装和单元货物 低压试验 | Packaging - Complete, filled transport packages and unit loads - Low pressure test |
| ISO 2875-2000 | 包装 满装的运输包装和单元货物 喷水试验 | Packaging - Complete, filled transport packages and unit loads - Water-spray test |
| ISO 2876-1985 | 包装 满装的运输包装 滚动试验 | Packaging; Complete, filled transport packages; Rolling test |
| ISO 3394-1984 | 刚性的矩形包装件尺寸 运输包装 | Dimensions of rigid rectangular packages; Transport packages |
| ISO 3676-1983 | 包装 单元货物大小 尺寸 | Packaging; Unit load sizes; Dimensions |
| ISO 3863-1989 | 圆柱形软木塞 尺寸特性、取样、包装和标记 | Cylindrical cork stoppers; dimensional characteristics, sampling, packaging and marking |
| ISO 3869-2001 | 复合软木 膨胀连接填充料 规范、包装和贴标志 | Composition cork - Expansion joint fillers - Specifications, packaging and marking |
| ISO 4178-1980 | 满装的运输包装 分类检验 记录的信息 | Complete, filled transport packages; Distribution trials; Information to be recorded |
| ISO 4180-1-1980 | 满装的运输包装 性能试验计划编制的一般规则 第1部分:一般原则 | Complete, filled transport packages; General rules for the compilation of performance test schedules; Part 1 : General principles |
| ISO 4180-2-1980 | 满装的运输包装 性能试验计划编制的一般规则 第2部分:定量的数据 | Complete, filled transport packages; General rules for the compilation of performance test schedules; Part 2 : Quantitative data |
| ISO 4472-1983 | 针叶树和阔叶树锯材 运输包装 | Coniferous and broadleaved sawn timber; Transportation packages |
| ISO 4709-2000 | 复合软木 衬垫材料 分级体系 要求、取样、包装和标记 | Composition cork - Gasket material - Classification system, requirements, sampling, packaging and marking |
| ISO 4714-2000 | 复合软木 规格、取样、包装和标记 | Composition cork - Specifications, sampling, packaging and marking |
| ISO 5989-1995 | 摄影技术.卤化银照相材料冲洗用预包装的化学药品.词汇 | Photography - Pre-packaged chemicals for the processing of silver halide based photographic materials - Vocabulary |
| ISO 6196-4-1998 | 缩微摄影技术 词汇 第4部分:材料和包装 两种语言版 | Micrographics - Vocabulary - Part 4: Materials and packaging |
| ISO 6590-1-1983 | 包装 袋 名词和种类 第1部分:纸袋 三种语言版 | Packaging; Sacks; Vocabulary and types; Part 1 : Paper sacks Trilingual edition |
| ISO 6590-2-1986 | 包装 袋 名词和种类 第2部分:热塑柔性薄膜袋 三种语言版 | Packaging; Sacks; Vocabulary and types; Part 2 : Sacks made from thermoplastic flexible film Trilingual edition |
| ISO 6591-1-1984 | 包装 袋 说明及测量方法 第1部分:空纸袋 | Packaging; Sacks; Description and method of measurement; Part 1 : Empty paper sacks |
| ISO 6591-2-1985 | 包装 袋 说明及测量方法 第2部分:热塑柔性薄膜空袋 | Packaging; Sacks; Description and method of measurement; Part 2 : Empty sacks made from thermoplastic flexible film |
| ISO 6599-1-1983 | 包装 袋 试验条件 第1部分:纸袋 | Packaging; Sacks; Conditioning for testing; Part 1 : Paper sacks |
| ISO 6661-1983 | 新鲜水果和蔬菜 陆路运输车辆上平行六面体包装件的排列 | Fresh fruits and vegetables; Arrangement of parallelepipedic packages in land transport vehicles |
| ISO 7023-1983 | 包装.袋.空纸袋检验抽样方法 | Packaging; Sacks; Method of sampling empty sacks for testing |
| ISO 7195-2005 | 核能.六氟化铀(UF6)的运输包装 | Nuclear energy - Packaging of uranium hexafluoride (UF6) for transport |
| ISO 7558-1988 | 水果和蔬菜预包装指南 | Guide to the prepacking of fruits and vegetables |
| ISO 7711-1-1997 | 牙科旋转器械 金钢钻器械 第1部分:尺寸、要求、标记和包装 | Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging |
| ISO 780-1997 | 包装 货物搬运的图形标志 | Packaging - Pictorial marking for handling of goods |
| ISO 7965-1-1984 | 包装 袋 跌落试验 第1部分:纸袋 | Packaging; Sacks; Drop test; Part 1 : Paper sacks |
| ISO 8037-2 Technical Corrigendum 1-2002 | 光学和光学仪器.显微镜.载玻片.第2部分:材料质量、成品标准和包装模式.技术勘误1 | Optics and optical instruments - Microscopes; Slides - Part 2: Quality of material, standards of finish and mode of packaging; Technical Corrigendum 1 |
| ISO 8037-2-1997 | 光学和光学仪器 显微镜 载玻片 第2部分:材料质量、成品标准和包装模式 | Optics and optical instruments - Microscopes - Slides - Part 2: Quality of material, standards of finish and mode of packaging |
| ISO 8115-3-1995 | 包 第3部分:棉包 包装及标记 | Bales - Part 3: Bales of cotton - Packaging and labelling |
| ISO 8255-2-1997 | 光学和光学仪器 显微镜 盖玻片 第2部分:材料质量、成品标准和包装模式 | Optics and optical instruments - Microscopes - Cover glasses - Part 2: Quality of materials, standards of finish and mode of packaging |
| ISO 8317 Technical Corrigendum 1-2005 | 防儿童拆开的包装.可再次包装的要求和试验程序.技术勘误1 | Child-resistant packaging - Requirements and testing procedures for reclosable packages; Technical Corrigendum 1 |
| ISO 8317-2003 | 防儿童拆开的包装.可再次包装的要求和试验程序 | Child-resistant packaging - Requirements and testing procedures for reclosable packages |
| ISO 8318-2000 | 包装 满装的运输包装和单元货物 采用可变频的正弦振动试验 | Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency |
| ISO 8351-1-1994 | 包装 袋 分类方法 第1部分:纸袋 | Packaging - Method of specification for sacks - Part 1: Paper sacks |
| ISO 8351-2-1994 | 包装 袋 分类方法 第2部分:热塑柔性薄膜袋 | Packaging - Method of specification for sacks - Part 2: Sacks made from thermoplastic flexible film |
| ISO 8367-1-1993 | 包装.一般用途包装袋的尺寸公差.第1部分:纸袋 | Packaging; dimensional tolerances for general purpose sacks; part 1: paper sacks |
| ISO 8367-2-1993 | 包装 一般用途包装袋的尺寸公差 第2部分:热塑柔性薄膜袋 | Packaging; dimensional tolerances for general purpose sacks; part 2: sacks made from thermoplastic flexible film |
| ISO 8474-1986 | 包装 满装的运输包装 浸水试验 | Packaging; Complete, filled transport packages; Water immersion test |
| ISO 8768-1986 | 包装 满装的运输包装 倒塌试验 | Packaging; Complete, filled transport packages; Toppling test |
| ISO 9454-1-1990 | 软钎焊剂 分类和要求 第1部分:分类、标记和包装 | Soft soldering fluxes; classification and requirements; part 1: classification, labelling and packaging |
| ISO Guide 41-1984 | 包装标准.消费者要求 | Standards for packaging; consumer requirements |
| ISO/Guide 41-1984 | 包装标准 消费者的需求 | Standards for packaging - Consumer requirements |
| ISO/TR 210-1999 | 精油 包装材料及条件和储存的通用规则 | Essential oils - General rules for packaging, conditioning and storage |
| ISO/TR 8281-1-1983 | 包装 用平面尺寸估计满装的容量 第1部分:纸袋 | Packaging; Estimating the filled volume using the flat dimensions; Part 1 : Paper sacks |
| 编号 | 中文名称 | 英文名称 |