编号 | 中文名称 | 英文名称 |
ANSI B11.15-2001
| 管道和型材弯曲机的制造、维护和使用的安全要求
| Pipe, Tube, and Shape Bending Machines, Safety Requirements for Construction, Care, and Use
|
ANSI GPTC Z 380.1 1998 Addendum 3-2000
| 燃气传输和分配管道系统指南 1998-2000
| Guide for Gas Transmission and Distribution Piping Systems 1998-2000
|
ANSI LC-1-2005
| 使用波纹不锈钢管(CSST)的燃气管道系统
| Fuel Gas Piping System Using Corrugated Stainless Steel Tubing (CSST) (same as CSA 6.26)
|
ANSI Man "D"/ACCA 1-2002
| 住宅管道的设计
| Residential Duct Design
|
ANSI Man"D"/ACCA 1-2002
| 住宅管道设计
| Residential Duct Design
|
ANSI Z83.8-2005
| 气体装置加热器和燃气管道炉
| Gas Unit Heaters and Gas-Fired Duct Furnaces (same as CGA 2.6)
|
ANSI/ACCA ManJ 2 Addendum C-2004
| MJB的管道阻力增益/损失修订版
| Duct Gain/Loss Revisions to MJ8
|
ANSI/API 1104-1999
| 管道和相关设施的焊接
| Welding of Pipelines and Related Facilities
|
ANSI/API 1160-2001
| 危险液体管道的管理系统完整性
| Managing System Integrity for Hazardous Liquid Pipeline
|
ANSI/API 570-2000
| 管路检验规程.工作中管道系统的检查、修理、更替及核定(第2版、含修改件1)
| Piping Inspection Code - Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems (Second Edition, Including Addendum 1)
|
ANSI/API RP1162-2003
| 管道操作者的公共注意项
| Public Awareness Programs for Pipeline Operators
|
ANSI/API RP5A 5-2005
| 新套管、管道和平端钻管的现场检验.第7版
| Field Inspection of New Casing, Tubing, and Plain-End Drill Pipe, 7th Edition
|
ANSI/API SPEC17E-2003
| 水下临时管道及电缆规范
| Specification for Subsea Umbilicals
|
ANSI/ASAE S376.2-1998
| 地下热塑性塑料灌溉管道的设计、安装和性能
| Design, Installation, and Performance of Underground Thermoplastic Irrigation Pipelines
|
ANSI/ASHRAE 130-1996
| 评定管道式空气终端装置的测试方法
| Methods of Testing for Rating Ducted Air Terminal Units
|
ANSI/ASHRAE/SMACNA 126-2000
| HVAC空气管道的试验方法
| Methods of Testing HVAC Air Ducts
|
ANSI/ASME A112.1.2-2004
| 管道系统中的气隙
| Air Gaps in Plumbing Systems
|
ANSI/ASME A112.18.1-2005
| 卫生管道配件
| Plumbing Fixture Fittings
|
ANSI/ASME A112.18.2-2005
| 卫生管道用污水管配件
| Plumbing Fixture Waste Fittings
|
ANSI/ASME A112.19.2-2003
| 抽水马桶与小便池水的釉瓷管道装配和水压要求
| Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals
|
ANSI/ASME A112.20.1-2004
| 高纯度管道系统安装工的资格鉴定
| Qualification of Installers of High Purity Piping Systems
|
ANSI/ASME A112.20.2-2004
| 管道系统用挡火物系统和设备的安装工资格鉴定
| Qualification of Installers of Firestop Systems and Devices for Piping Systems
|
ANSI/ASME A112.4.14-2004
| 卫生管道系统中使用的手动直角转弯截止阀
| Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems
|
ANSI/ASME A112.6.1M-1997
| 公共用离开地面的管道工程装置的支架
| Supports for Off-the-Floor Plumbing Fixtures for Public Use
|
ANSI/ASME A13.1-1996
| 管道系统识别图解
| Scheme for the Identification of Piping Systems
|
ANSI/ASME B16.33-2002
| 125表压及以下的气体管道系统中使用的手动金属气体阀
| Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig
|
ANSI/ASME B16.44-2002
| 家用管道系统中使用的手工操作的金属气体阀门
| Manually Operated Metallic Gas Valves for Use in House Piping Systems
|
ANSI/ASME B16.44a-1997
| 家庭管道系统中用手动金属气阀
| Manually Operated Metallic Gas Valves for Use in House Piping Systems
|
ANSI/ASME B31.1-2001
| 动力管道
| Power Piping
|
ANSI/ASME B31.11-2002
| 泥浆输送管道系统
| Slurry Transportation Piping Systems
|
ANSI/ASME B31.1a-2005
| 动力管道
| Power Piping
|
ANSI/ASME B31.1b-2004
| 动力管道
| Power Piping
|
ANSI/ASME B31.5-2001
| 制冷管道
| Refrigeration Piping
|
ANSI/ASME B31.8-2003
| 气体输送和分配管道系统
| Gas Transmission and Distribution Piping Systems
|
ANSI/ASME B31.8S-2004
| 燃气管道的管理系统完整性
| Managing System Integrity of Gas Pipelines
|
ANSI/ASME B31.9-2004
| 建筑物服务设施用压力管道标准
| Building Services Piping Code for Pressure Piping
|
ANSI/ASME B31G-1991
| 测定锈蚀管道残留强度的手册
| Manual for Determining the Remaining Strength of Corroded Pipelines
|
ANSI/ASME B32.5-1977
| 除管道外管状金属产品的最优米制尺寸
| Tubular Metal Products Other Than Pipe, Preferred Metric Sizes for
|
ANSI/ASME MFC-16M-1995
| 用电磁流量仪测量封闭管道中液体流量
| Measurement of Fluid Flow in Closed Conduits by Means of Electromagnetic Flowmeters
|
ANSI/ASME MFC-18M-2001
| 用可变面积计量计测量管道中的液体流量
| Measurement of Fluid Flow in Pipes Using Variable Area Meters
|
ANSI/ASME MFC-3M-1-2004
| 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第1部分:总则
| Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 1-General
|
ANSI/ASME MFC-3M-2-2004
| 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第2部分:孔板
| Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 2-Orifice Plates
|
ANSI/ASME MFC-3M-3-2004
| 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第3部分:喷嘴和文杜利喷嘴
| Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 3 - Nozzles and Venturi Nozzles
|
ANSI/ASME MFC-3M-4-2004
| 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第4部分:文杜利流量计
| Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi - Part 4 - Venturi Meters
|
ANSI/ASME MFC-5M-1985
| 用过渡时间超声流量计测量密封管道中的液体流量
| Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flow Meters, Measurement of
|
ANSI/ASME MFC-6M-1998
| 用涡流流量计测量管道中的液体流量
| Fluid Flow in Pipes Using Vortex Flow Meters, Measurement of
|
ANSI/ASSE 1001-2001
| 应用管道的大气式真空制动器
| Pipe-Applied Atmospheric-Type Vacuum Breakers
|
ANSI/ASSE 1051-1998
| 污水管道系统用气体导入阀
| Air Admittance Valves for Plumbing Drainage Systems
|
ANSI/ASTM D1599-1999
| 塑料管材、管道和管件短时液压故障压力试验方法
| Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
|
ANSI/ASTM D2235-2004
| ABS塑料管道和配件用液状粘固剂规范
| Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
|
ANSI/ASTM D2564-2004
| 聚氯乙烯塑料管道系统用液状粘固剂规范
| Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
|
ANSI/ASTM D2680-2001
| ABS和PVC复合管道规范
| Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
|
ANSI/ASTM D2837-2004
| 获得热塑性管道材料静水压设计基数的试验方法
| Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
|
ANSI/ASTM D3138-2004
| 丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯无压管道系统构件之间转换接头用液状粘固剂规范
| Specification for Solvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
|
ANSI/ASTM D3261-1997
| 聚乙烯塑料管材和管道用对接热融合聚乙烯塑料管件规范
| Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
|
ANSI/ASTM D4396-1999
| 非承压管道(X-15-358)用硬质聚氯乙烯(PVC)和相关塑料化合物规范(08.04)
| Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related Plastic Compounds for Non-Pressure Piping Products (X-15-358) (08.04)
|
ANSI/ASTM D5926-2004
| 水、废水和排气(DWV)、下水道、卫生设施和暴雨管道系统用聚氯乙烯垫圈的规范
| Specification for Poly(Vinyl Chloride) (PVC) Gaskets for Drain, Waste and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
|
ANSI/ASTM D6070-2002
| 预组装电线和电缆用光壁可盘绕聚乙烯(PE)管道物理特性试验方法
| Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
|
ANSI/ASTM E2231-2003
| 防火焰扩散和隔烟管道和导管隔离层的安装和样品制备的标准实施规范
| Standard Practice on Specimen Preparation and Mounting for Pipe and Duct Insulation for Flame Spread and Smoke Obscuration
|
ANSI/ASTM F1006-1997
| 船用管道装置用液滴分离器规范
| Specification for Entrainment Separators for Use in Marine Piping Applications
|
ANSI/ASTM F1007-1997
| 船用套装滑动型管道膨胀节规范
| Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application
|
ANSI/ASTM F1025-1994
| 加强或修补聚乙烯气体承压管道孔洞用全环绕型带夹选用导则
| Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
|
ANSI/ASTM F1057-2005
| 利用热循环技术评估压塑聚乙烯(PVC)管道质量的实施规程
| Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
|
ANSI/ASTM F1120-1987
| 管道设备用环形金属波纹膨胀连接件的规范
| Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
|
ANSI/ASTM F1155-1998
| 管道系统材料的选择和应用规范
| Practice for Selection and Application of Piping System Materials
|
ANSI/ASTM F1201-1988
| 0oF以上的管道设备中流体调节器配件的规范
| Specification for Fluid Conditioner Fittings in Piping Applications Above 0oF
|
ANSI/ASTM F1365-1991
| 采用柔性合成橡胶密封件的塑料地下管道接头耐水渗透性试验方法
| Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints which Use Flexible Elastomeric Seals
|
ANSI/ASTM F1417-1996
| 使用低压空气对塑料自流排水管道进行安装验收的试验方法
| Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low Pressure Air
|
ANSI/ASTM F1429-1999
| 用柔性合成橡胶密封件固定在套桶中的塑料地下管道接头组合力试验方法
| Test Method for Assembly Force of Plastic Underground Conduit Joints that Use Flexible Elastomeric Seals Located in the Bell
|
ANSI/ASTM F1476-2001
| 管道设带衬垫的机械连接件性能规范
| Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
|
ANSI/ASTM F1548-2001
| 管道设备带衬垫的机械连接件配件性能规范
| Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
|
ANSI/ASTM F1563-2001
| 聚乙烯(PE)燃气管道挤压工具规范
| Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
|
ANSI/ASTM F1697-2002
| 聚氯乙烯 (PVC) 排污管道和配件规范
| Specification for Poly (Vinyl Chloride) (PVC) Drain, Waste and Pipe and Fittings
|
ANSI/ASTM F1698-2002
| 现有排污管和管道修复用聚氯乙烯管线衬里和水泥薄浆安装惯例
| Practice for Installation of Poly (Vinyl Chloride) (PVC) Linear and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
|
ANSI/ASTM F1735-2002
| 修复现有的人可进入的污水管道用PVC衬里的聚氯乙烯(PVC)异型带材规范
| Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liner for Rehabilitation of Existing Man-Entry Sewers and Conduits
|
ANSI/ASTM F1741-2005
| 现有排水管和管道修复用机械螺旋缠绕聚氯乙烯(PVC)内衬管安装的实施规程
| Practice for Installation of Machine Spiral Wound Poly Vinyl Chloride (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
|
ANSI/ASTM F1743-1996
| 通过现场硫化热固性树脂管的现场拉入安装对已有管道进行修复的操作规程
| Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-place Installation of Cured-in-place Thermosetting Resin Pipe (CIPP)
|
ANSI/ASTM F1871-2002
| 现有排污管和管道修复用波纹状/形成聚氯乙烯管道形状规范
| Specification for Folded/formed Poly (Vinyl Chloride) Pipe Type a for Existing Sewer and Conduit Rehabilitation
|
ANSI/ASTM F1901-2004
| 屋顶排水系统用聚乙烯管道和配件规范
| Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
|
ANSI/ASTM F1924-2005
| 外径可控的聚乙烯供气管道用塑料机械配件规范
| Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
|
ANSI/ASTM F1947-2004
| 折叠式聚氯乙烯管(PVC)装进现有污水管和下水管道中的实施规程
| Practice for Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
|
ANSI/ASTM F1962-1999
| 包括渡口在内的障碍物下安放聚乙烯管道时最大水平方向打眼指南
| Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
|
ANSI/ASTM F2014-2000
| 管道非增强挤制T形接头规范
| Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
|
ANSI/ASTM F2019-2003
| 将玻璃纤维增强塑料(GRP)现场硫化热固性树脂管(CIPP)现场拖拉并安装进已有管道的操作规程
| Practice for Existing Pipelines and Conduits by the Pulled-in-Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
|
ANSI/ASTM F2145-2001
| 外径可控聚酰胺11管及管道系统用聚酰胺11(Pa11)机械配件规范(60-01-02)
| Specification for Polyamide11 (Pa11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide11 Pipe and Tubing (60-01-02)
|
ANSI/ASTM F2159-2005
| SDR9交联聚乙烯(PEX)管道用带铜夹紧环固的嵌入式塑料配件规范
| Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing
|
ANSI/ASTM F2164-2002
| 采用液压法进行聚乙烯压力管道系统场漏试验的惯例
| Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
|
ANSI/ASTM F2176-2002
| 聚乙烯管道及内管道用机械连接件规范
| Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
|
ANSI/ASTM F2207-2002
| 住宅金属输气管道衬里系统现场修复规范
| Specification for Cured-in-place Pipe Lining System for Rehabilitation of Metallic Gas Pipes
|
ANSI/ASTM F2389-2005
| 额定压力聚丙烯管道系统标准规范
| Specification for Pressure-rated Polypropylene Pp Piping Systems
|
ANSI/ASTM F2402-2004
| 与医疗气体管道系统终端装置相连的流量测量装置.采用ISO 15002作为美国国家标准(有所偏差)
| Flow-metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems, Adoption of ISO 15002 as an American National Standard (with Deviations)
|
ANSI/ASTM F2509-2006
| 外径可控的聚乙烯配气管和管道上用的现场组合Anoddeless Riser成套器具的规范
| Specification for Field-assembled Anoddeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
|
ANSI/ASTM F409-2002
| 可拆卸更换的热塑性塑料管及管道配件的规范
| Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
|
ANSI/ASTM F628-2006
| 带泡沫填充料的(ABS)40号塑料排污和通风管道规范
| Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core
|
ANSI/ASTM F645-2004
| 热塑性水压管道系统的选定、设计和安装指南
| Guide for Selection, Design, and Installation of Thermoplastic Water Pressure Piping Systems
|
ANSI/ASTM F683-2004
| 管道和机械隔热的选定和应用实施规程
| Practice for Selection and Application of Thermal Insulation for Piping and Machinery
|
ANSI/ASTM F689-1997
| 测定内壁金属铸件塑料气压管道地面温度惯例
| Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe within Metallic Casings
|
ANSI/ASTM F690-1996
| 热塑压力管道灌溉系统地下安装惯例
| Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
|
ANSI/ASTM F704-1997
| 管道系统法兰接头用螺栓长度的选用惯例
| Practice for Selecting Bolting Lengths for Piping System Flanged Joints
|
ANSI/ASTM F708-1997
| 硬质管道支架的设计与安装惯例
| Practice for Design and Installation of Rigid Pipe Hangers
|
ANSI/ASTM F721-1981
| 标准管道组装件的规范
| Specification for Gage Piping Assemblies
|
ANSI/ASTM F722-1982
| 船上管道系统用焊接接头规范
| Specification for Welded Joints for Shipboard Piping Systems
|
ANSI/ASTM F725-1989
| 热塑性管道和配件标准中冲击试验要求起草规程
| Practice for Drafting Impact Test Requirements in Thermoplastic Pipe and Fittings Standards
|
ANSI/ASTM F758-1995
| 高速公路、机场和类似场所排水系统用光滑壁聚氯乙烯(PVC) 塑料管道系统规范
| Specification for Smooth-Wall Poly (Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
|
ANSI/ASTM F771-2005
| 聚乙烯(PE)热塑性高压灌溉管道系统规范
| Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
|
ANSI/ASTM F891-2004
| 具有蜂窝式芯的复合聚氯乙烯(PVC)塑料管道的规范
| Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core
|
ANSI/ASTM F948-1994
| 固定流体内压下塑料管道系统和组件失效时间-试验方法
| Test Method for Time-to-Failure of Plastic Piping Systems and Components under Constant Internal Pressure with Flow
|
ANSI/AWS B2.1-1-201-1996
| 主要用于管道的、在焊接条件下、(M-1/P-1/S-1,1或2组)1/8到3/4英寸厚、E6010(垂直向上)及E7018(垂直向上)碳
| Standard Welding Procedure Specification (WPS) for Shielded Metel Arc Welded of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Uphill) followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-1-202-1996
| 主要用于管道的、在焊接条件下(M-1/P-1/S-1,1或2组)1/8到3/4英寸厚、E6010(垂直向下)及E7018(垂直向上)碳钢
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill) followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-1-203-1996
| 主要用于管道的、在焊接条件下(M-1/P-1/S-1,1或2组)1/8到3/4英寸厚、E6010(垂直向上)碳钢的药皮焊条电弧焊
| Standard Welding Procedure Specification (WPS) for Shieldied Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 though 3/4 inch Thick, E6010 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-1-204-1996
| 主要用于管道的、在焊接条件下(M-1/P-1/S-1,1或2组)1/8到3/4英寸厚、E6010碳钢的药皮焊条电弧焊的标准焊接
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-1-205-1996
| 主要用于管道的、在焊接或PWHT条件下(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、E6010(垂直向上)及E7018(垂直
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Uphill), Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-1-206-1996
| 主要用于管道的、在焊接或PWHT条件下(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、E6010(垂直向下)及E7018(垂直
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Downhill), Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications.
|
ANSI/AWS B2.1-1-207-1996
| 主要用于管道的、在焊接或PWHT条件下(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、ER70S-2碳钢的钨极电弧焊的标
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2, As Welded or PWHT Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-1-208-1996
| 主要用于管道的在焊接或PWHT条件下(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、E7018碳钢的药皮焊条电弧焊的标
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P -1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-1-209-1996
| 主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、ER70S-2及E7018碳钢的药皮焊
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1 /8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-1-210-2001
| 标准焊接程序规范(WPS).主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、INMS
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-1-211-2001
| 标准焊接程序规范(WPS).主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、INMS
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-1/8-228-2002
| 碳钢与奥氏体不锈钢屏蔽金属电弧焊(从M-1/P-1/S-1,组1或组2焊接到M-8/P-8/S-8, 组1)1/8到1-1/2英寸厚,ER309
| Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309-15, 16 or, 17, As-Welded Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-1/8-229-2002
| 碳钢与奥氏体不锈钢气体钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M- 8/P-8/S-8, 组1)1/8到1-1/2英寸厚ER30
| Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1 Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, ER309 and E309-15, 16, or 17, As-Welded Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-1/8-230-2002
| 气体保护钨极弧焊的标准焊接程序规范(WPS),可熔嵌入根部的,碳钢与奥氏体不锈钢(M-1/P-1/S-1, 组 1 和 2 焊
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/16 through 1-1/2 inch thick, IN309 and ER309, As-Welded Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-1/8-231-2002
| 带可熔嵌入焊条的碳钢与奥氏体不锈钢气体保护钨电弧焊(从M-1/P-1/S-1,组1或组2焊接到M- 8/P-8/S-8, 组1)
| Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding, with Consumable Insert Root, Followed by Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1/P-1/S-1, Groups 1 and 2 Welded to M-8/P-8/S-8, Group 1) 1/8 through 1-1/2 inch thick, IN309, ER309, and E309-15, 16, or, 17, As-Welded Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-4-217-1999
| 铬钼钢气体保护钨极弧焊标准焊接程序规范(M-4/P-4/S-4,1或2组)ER 80S-B2.在焊接条件下1/8到1/2英寸厚或在PW
| Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) ER80S-B2, 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick PWHT Condition, Primarily Pipe Application
|
ANSI/AWS B2.1-4-218-1999
| 标准焊接程序规范(WPS).主要用于管道的、在焊接或1/8到1-1/2英寸厚PWHT条件下、(M-4/P-4/S-4,1或2组)E8018-
| Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) E8018-B2, 1/8 through 1/2 in. Thick, As-Welded Condition or 1/8 through 1-1/2 in. Thick PWHT Condition, Primarily Pipe Application
|
ANSI/AWS B2.1-4-219-1999
| 气体保护钨极弧焊以及铬钼钢的气体保护钨极弧焊标准焊接程序规范(M-4/P-4/S-4,1或2组).在焊接条件下1/8到12
| Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 12/2 in. thick, As-Welded Condition or 1/8 through 1/1/2 in. Thick, PWHT Condition ER80S-B2, E8018-B2 Primarily Pipe Application
|
ANSI/AWS B2.1-4-220-1999
| 标准焊接程序规范(WPS).主要用于IN515, ER80S-B2管道的、在焊接或1/8到3/4英寸厚PWHT条件下、(M-4/P-4/S-4,
| Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick, PWHT Condition IN515, ER80S-B2, Primarily Pipe Application
|
ANSI/AWS B2.1-4-221-1999
| 气体保护钨极弧焊(自耗嵌入式焊缝根部)以及铬钼钢保护金属电弧焊标准焊接程序规范(M-4/P-4/S-4,1或2组).在
| Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4/S-4, Group 1 or 2) 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 1-1/2-in. Thick, PWHT Condition, IN515, ER80S-B2 and E8018-B2, Primarily Pipe Application
|
ANSI/AWS B2.1-5A-222-1999
| 铬钼钢气体保护钨极弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下ER 90S-BS,1/8到1/2英寸厚或在PWHT条件
| Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) ER90S-B3 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 3/4-in. Thick, PWHT Condition, Primarily Pipe Application
|
ANSI/AWS B2.1-5A-223-1999
| 铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下ER 9018-BS,1/8到1/2英寸厚或在PWHT条件下
| Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) ER9018-B3 1/8 through 1/2-in. Thick, As-Welded Condition or 1/8 through 1-1/2-in. Thick, PWHT Condition, Primarily Pipe Application
|
ANSI/AWS B2.1-5A-224-1999
| 气体保护钨极弧焊以及铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件下1/8到1/2英寸厚或在P
| Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2-in. Thick As-Welded Condition, or 1/8 through 1-1/2-in. Thick PWHT Condition, ER90S-B3, E9018-B3, Primarily Pipe Application
|
ANSI/AWS B2.1-5A-225-1999
| 标准焊接程序规范(WPS).主要用于IN521,ER90S-B3管道的、在焊接或1/8到3/4英寸厚PWHT条件下、(M-5A或P-5A)1/
| Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2 in. thick, As-Welded Condition or 1/8 through 3/4 in. thick, PWHT Condition IN521, ER90S-B3 Primarily Pipe Application
|
ANSI/AWS B2.1-5A-226-1999
| 气体保护钨极弧焊(自耗嵌入式焊缝根部)以及铬钼钢保护金属电弧焊标准焊接程序规范(M-5A或P-5A).在焊接条件
| Standard Welding Procedure Specification (WPS) Gas Tungsten Arc Welding (Consumable Insert Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A or P-5A) 1/8 through 1/2-in. Thick As-Welded Condition, or 1/8 through 1-1/2-in. Thick PWHT Condition, IN521, ER90S-B3, and E9018-B3, Primarily Pipe Application
|
ANSI/AWS B2.1-8-212-2001
| 主要用于管道的、在ERXX焊接条件下、1/8到1-1/2英寸厚的奥氏体不锈钢(M-8/P-8/S-8,组1)的钨电极惰性气体保
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick ERXX, As-Welded Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-8-213-1997
| 主要用于管道的、在焊接条件下(M-8/P-8/S-8,组)1/8到1-1/2英寸E3XX-XX奥氏体不锈钢的药皮焊条电弧焊的标准
| Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 inch Thick E3XX-XX, As-Welded Condition, Primarily Pipe Applications
|
ANSI/AWS B2.1-8-214-2001
| 标准焊接程序规范(WPS).主要用于管道的,在焊接条件下、1/8到1-1/2英寸厚ER3XX,E3XX-XX的奥氏体不锈钢(M-8/P
| Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group), 1/8 through 1-1/2 Inch Thick ER3XX, E3XX-XX, As-Welded Condition, Primarily Pipe Applications
|
ANSI/AWS D10.10-1999
| 管和管道焊接局部加温推荐规程
| Recommended Practices for Local Heating of Welds in Piping and Tubing
|
ANSI/AWS D10.13-1995
| 医疗气体系统用铜管道和管系的钎焊的推荐实施规程
| Recommended Practices for the Brazing of Copper Pipe and Tubing for Medical Gas Systems
|
ANSI/AWS D10.13/D 10.13M-2001
| 医疗气体系统用铜管和管道钎焊的推荐规程
| Recommended Practices for the Brazing of Copper Pipe and Tubing for Medical Gas Systems
|
ANSI/AWS D10.6-2000
| 钛管和管道钨电极气体保护焊推荐规程
| Gas Tungsten Arc Welding of Titanium Piping and Tubing, Recommended Practice for
|
ANSI/AWS D18.1-1999
| 卫生洁具用奥氏体不锈钢管和管道的焊接规范
| Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygenic) Applications
|
ANSI/AWS F4.1-1999
| 容器和管道焊接和切割准备推荐安全规程
| Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping
|
ANSI/AWWA C203a-1999
| 钢制供水管道的煤焦油保护涂层和内衬标准.搪瓷和胶带.热水
| Standard for Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot Applied
|
ANSI/AWWA C217-1999
| 供水钢管道专用型钢、连接件和配件外部低温矿脂带和矿脂腊油带包覆层
| Cold-Applied Petrolatum Tape and Petroleum Wax Tape Coating for the Exterior of Special Sections, Connections, and Fittings for Buried Steel Water Pipelines
|
ANSI/AWWA C218-2002
| 地面钢制供水管道和配件外部涂覆
| Coating the Exterior of Aboveground Steel Water Pipelines and Fittings
|
ANSI/AWWA C800-2005
| 地下管道阀门和配件
| Underground Service Line Valves and Fittings
|
ANSI/FCI 78-1-1998
| 不包括Y型在内的管道滤器压力额定值标准
| Pressure Rating Standard for Pipeline Strainers Other than "Y" Type
|
ANSI/GPTC Z380.1-2003 Addendum 4-2006
| 燃气传输和分配管道系统指南2003版 附录4
| Guide for Gas Transmission and Distribution Piping Systems 2003 Edition - Addendum 4
|
ANSI/GPTC Z380.1-2003 Addendum No. 3-2005
| 气体运输和分配用管道系统的GPTC指南
| GPTC Guide for Gas Transmission and Distribution Piping Systems
|
ANSI/GPTC Z380.1-2003 TR 00-15-2005
| 气体运输和分配用管道系统的指南
| Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005)
|
ANSI/GPTC Z380.1-2003 TR 02-25-2005
| 气体运输和分配用管道系统的指南(与ANSI GPTC Z380.1-2003补充件3-2005联合组成的)
| Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005)
|
ANSI/GPTC Z380.1-2003 TR 03-12-2005
| 气体运输和分配用管道系统的指南(与ANSI GPTC Z380.1-2003补充件3-2005联合组成的)
| Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005)
|
ANSI/GPTC Z380.1-2003 TR 03-41-2005
| 气体运输和分配用管道系统的指南(与ANSI GPTC Z380.1-2003补充件3-2005联合组成的)
| Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005)
|
ANSI/GPTC Z380.1-2003 TR 04-06-2005
| 气体运输和分配用管道系统的指南(与ANSI GPTC Z380.1-2003补充件3-2005联合组成的)
| Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005)
|
ANSI/GPTC Z380.1-2003 TR 04-07-2005
| 气体运输和分配用管道系统的指南(与ANSI GPTC Z380.1-2003补充件3-2005联合组成的)
| Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005)
|
ANSI/GPTC Z380.1-2003 TR 04-12-2005
| 气体运输和分配用管道系统的指南(与ANSI GPTC Z380.1-2003补充件3-2005联合组成的)
| Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005)
|
ANSI/GPTC Z380.1-2003 TR 04-53-2005
| 气体运输和分配用管道系统的指南(与ANSI GPTC Z380.1-2003补充件3-2005联合组成的)
| Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005)
|
ANSI/GPTC Z380.1-2003 TR 04-55-2005
| 气体运输和分配用管道系统的指南(与ANSI GPTC Z380.1-2003补充件3-2005联合组成的)
| Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005)
|
ANSI/GPTC Z380.1-2003 TR 04-57-2005
| 气体运输和分配用管道系统的指南(与ANSI GPTC Z380.1-2003补充件3-2005联合组成的)
| Guide for Gas Transmission and Distribution Piping Systems (consolidated into ANSI GPTC Z380.1-2003 Addendum No. 3-2005)
|
ANSI/IAPMO UPC1-2003
| 2003统一管道工程代码
| 2003 Uniform Plumbing Code
|
ANSI/ICEA P-54-440-2002
| 安装在电缆管道中的电缆的载流量
| Ampacities of Cables Installed in Cable Trays
|
ANSI/IEEE 1235-2000
| 地下电力电缆和管道用可识别护套的特性指南
| Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts
|
ANSI/IEEE 628-2001
| 核电站1E级电路电缆管道系统的设计、安装和合格鉴定的标准
| Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations, Criteria for the Design, Installation, and Qualification of
|
ANSI/IEEE 844-2000
| 管道和容器的电阻抗、电感和集肤效应生热的推荐规程
| Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels, Recommended Practice for
|
ANSI/ISA 77.70-2005
| 矿物燃料发电厂设备管道安装
| Fossil Fuel Power Plant Instrument Piping Installation
|
ANSI/ISA S67.10-1994
| 核电站中使用的取样管线管系和管道标准
| Sample-Line Piping and Tubing Standard for Use in Nuclear Power Plants
|
ANSI/NAAMM AMP521-2001
| 带圆形台面的管道围栏系统手册
| Pipe Railing Systems Manual Including Round Table
|
ANSI/NACE RP0502-2003
| 管道外部腐蚀的直接评估方法
| Pipeline External Corrosion Direct Assessment Methodology
|
ANSI/NACE TM0284-2003
| 耐逐级断裂的管道钢的评价
| Evaluation of Pipeline Steel for Resistance to Stepwise Cracking
|
ANSI/NECA 111-2003
| 非金属管道的安装标准(RNC、ENT和LFNC)
| Standard for Installing Nonmetallic Raceways (RNC, ENT and LFNC)
|
ANSI/NECA 605-2005
| 地下非金属公用事业管道安装的推荐规程
| Recommended Practice for Installing Underground Nonmetallic Utility Duct
|
ANSI/NFPA 274-2003
| 管道绝缘材料燃烧特性评价的标准试验方法
| Standard Test Method to Evaluate Fire Performance Characteristics of Pipe Insulation
|
ANSI/NSF 14(i11)-2005
| 塑料管道系统部件和相关材料
| Plastics Piping System Components and Related Materials
|
ANSI/NSF 14(i7)-2004
| 塑料管道组件和相关材料
| Plastics Piping System Components and Related Materials
|
ANSI/NSF 14-2003
| 塑料管道系统配件和相关材料
| Plastics Piping System Components and Related Materials (i4)
|
ANSI/NSF 24-1988
| 用于活动房屋和游乐车的卫生管道系统零件
| Plumbing System Components for Manufactured Homes and Recreational Vehicles
|
ANSI/SAE J518-1993
| 四螺栓拼合法兰型液压法兰管、管道及软管接头
| Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type
|
ANSI/SMACNA 005-2003
| 圆形工业管道建造标准
| Round Industrial Duct Construction Standards
|
ANSI/TIA/EIA 102BAAA-1-1999
| 项目25, FDMA共用气体管道接头,补充件1
| Project 25 FDMA Common Air Interface Addendum 1
|
ANSI/UL 1978-2005
| 润滑脂管道的安全标准
| Standard for Safety for Grease Ducts
|
ANSI/UL 1996-2004
| 管道加热器的安全标准
| Standard for Safety for Duct Heaters
|
ANSI/UL 2239-2004
| 导线管、管道和电缆支持用五金件标准
| Standard for Hardware for the Support of Conduit, Tubing and Cable
|
ANSI/UL 567-2004
| 石油产品和LP气用紧急断开装置、旋转连接器和管道连接配件
| Emergency Breakaways Fittings, Swivel Connectors and Pipe-Connection Fittings for Petroleum Products and LP-Gas
|
ANSI/UL 569-2000
| 液化合油汽固定管道接口标准
| Pigtails and Flexible Hose Connectors for LP-Gas
|
ANSI/UL 5A-2003
| 非金属表面电缆管道和配件的安全标准
| Standard for Safety for Non-Metallic Surface Raceways and Fittings
|
ANSI/UL 5B-2004
| 支柱型槽形电缆管道和配件
| Strut-Type Channel Raceways and Fittings
|
ANSI/UL 5C-2003
| 与数据、信号和控制电路一起使用的表面电缆管道和配件的安全标准
| Standard for Safety for Surface Raceways and Fittings for Use with Data, Signal and Control Circuits
|
ANSI/UL 870-2003
| 电线管道、辅助槽和相关配件
| Wireways, Auxiliary Gutters, and Associated Fittings
|
ASME A112.1.2-1991
| 管道系统中的空气间架
| (Air gaps in plumbing systems)
|
ASME A112.19.1M Supplement 2-2
| 搪瓷铸铁管道固定件.补充件2
| (Enameled cast iron plumbing fixtures - Supplement 2)
|
ASME A112.19.1M-1994
| 搪瓷铸铁管道固定件
| (Enameled cast iron plumbing fixtures)
|
ASME A112.19.4M Supplement 2-2
| 搪瓷铸钢管道固定件.补充件2
| (Porcelain enameled formed steel plumbing fixtures - Supplement 2)
|
ASME A112.19.4M-1994
| 搪瓷铸钢管道固定件
| (Porcelain enameled formed steel plumbing fixtures)
|
ASME A112.19.9M-1991
| 未上釉陶瓷管道紧固件
| (Non-vitreous ceramic plumbing fixtures)
|
ASME A13.1-1996
| 管道系统识别方案
| (Scheme for the identification of piping systems)
|
ASME B16.33-2002
| 125表压及以下的气体管道系统中使用的手动金属气阀
| (Manually operated metallic gas valves for use in gas piping systems up to 125 psi (sizes NPS 1/2 through NPS 2))
|
ASME B31.1 Interpretations 25-
| 说明:动力管道
| (Interpretations 25: Power piping)
|
ASME B31.11 Interpretations 1-
| 说明:泥浆输送管道系统
| (Interpretations 1: Slurry transportation piping systems)
|
ASME B31.11-2002
| 泥浆输送管道系统
| (Slurry transportation piping systems)
|
ASME B31.1c Addenda-1994
| 动力管道.修改件
| (Power piping; Addenda)
|
ASME B31.2-1968
| 气体燃料管道
| (Fuel gas piping)
|
ASME B31.3 Cases NO. 2-1993
| 压力管道用套管规程.套管141:在ANSI/ASME B 31.3管道标准中铝合金法兰的使用规则
| (Cases code for pressure piping - Case 141: Rules for use of aluminium alloy flanges in ANSI/ASME B 31.3 piping)
|
ASME B31.4-2002
| 液烃和其他液体用管道输送系统
| (Pipeline transportation systems for liquid hydrocarbons and other liquids)
|
ASME B31.5 Interpretations 5-1
| 说明:制冷管道
| (Interpretations 5: Refrigeration piping)
|
ASME B31.5-2001
| 制冷管道和传热元件
| (Refrigeration piping and heat transfer components)
|
ASME B31.8 Interpretations 10-
| 说明:气体运输和分配管道系统
| (Interpretations 10: Gas transmission and distribution piping systems)
|
ASME B31.8b Addenda-1994
| 气体输送和分配管道系统.修改件
| (Gas transmission and distribution piping systems; Addenda)
|
ASME B31.8c Addenda-1994
| 气体运输和气体分配管道系统.修改件
| (Gas transmission and distribution piping systems; Addenda)
|
ASME B31.8S-2001
| 燃气管道的管理系统完整性.补充件
| (Managing system integrity of gas pipelines; Supplement)
|
ASME B31.9-1996
| 建筑物服务管道
| (Building services piping)
|
ASME B31G-1991
| 用于测定受腐蚀管道剩余强度的手册.MSME B31 压力管道规范的补充件
| (Manual for determining the remaining strength of corroded pipelines; A supplement to ASME B31 code for pressure piping)
|
ASME B32.5-1977
| 除管道外的管形金属制品的优选米制尺寸
| (Preferred metric sizes for tubular metal products other than pipe)
|
ASME B32.6M-1984
| 除管道外的管形金属制品与英制尺寸相当的优选米制尺寸
| (Preferred metric equivalents of inch sizes for tubular metal products other than pipe)
|
ASME MFC-1M-1991
| 密封管道中液体流量测量用术语汇编
| (Glossary of terms used in measurement of fluid flow in pipes)
|
ASME MFC-2M-1983
| 密封管道中液体流量测量的不确定度
| (Measurement uncertainty for fluid flow in closed conduits)
|
ASME MFC-3M Errata-1990
| 用孔板,管接头和文丘里管测量管道中的流量.正误表
| (Measurement of fluid flow in pipes using orifice, nozzle, and Venturi; Errata)
|
ASME MFC-3M-1989
| 用孔板,管接头和文丘里管测量管道中的液体流量.
| (Measurement of fluid flow in pipes using orifice, nozzle, and Venturi)
|
ASME MFC-6M Errata-1987
| 用涡流流量计测量管道中的液体流量.正误表
| (Measurement of fluid flow in pipes using vortex flow meters; Errata)
|
ASME Y32.2.3-1949
| 管道配件,阀门,管道配置用图形符号
| (Graphical symbols for pipe fittings, valves and piping)
|
ASME Y32.4-1977
| 建筑学和房屋建筑简图上管道装置示意用图形符号
| (Graphic symbols for plumbing fixtures for diagrams used in architecture and building construction)
|
ASTM A 1047/A 1047M-2005
| 管道的气压泄漏标准试验方法
| Standard Test Method for Pneumatic Leak Testing of Tubing
|
ASTM A 105/A 105M-2005
| 管道设备用碳素钢锻件的标准规范
| Standard Specification for Carbon Steel Forgings for Piping Applications
|
ASTM A 350/A 350Ma-2004
| 管道部件用要求切口韧性试验的碳素钢与低合金钢锻件的标准规范
| Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
|
ASTM A 350/A 350Mc-2000
| 管道部件用要求切口韧性试验的碳素钢与低合金钢锻件的标准规范
| Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
|
ASTM A 420/A 420M-2006
| 低温设备用锻制碳素钢和合金钢管道配件的标准规范
| Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
|
ASTM A 511-2004
| 无缝不锈钢机械管道的标准规范
| Standard Specification for Seamless Stainless Steel Mechanical Tubing
|
ASTM A 696a-1990
| 压力管道部件用特级热锻或冷精轧碳素钢棒标准规范
| Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
|
ASTM A 727/A 727M-2002
| 具有固定切口韧性的管道部件用碳素钢锻件标准规范
| Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
|
ASTM A 787-2005
| 金属涂覆电阻焊接碳素钢机械管道的标准规范
| Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
|
ASTM A 807/A 807M-2002
| 生活污水管及其它类似用途安装波纹钢板结构管道的标准实施规范
| Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
|
ASTM A 836/A 836M-2002
| 玻璃衬里的管道系统和压力容器设备用钛稳定的碳素钢锻件标准规范
| Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
|
ASTM A 847/A 847M-2005
| 提高耐大气腐蚀性的冷成型焊接和无缝高强度低合金结构管道用标准规范
| Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
|
ASTM A 888-2005
| 污水、雨水、废物和通风管道用无凸口铸铁污水管及配件的标准规范
| Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
|
ASTM A 930-2003
| 涵洞、雨水管道和其它地下管道用波纹形金属管寿命周期成本分析的标准实施规范
| Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
|
ASTM A 961/A 961M-2005
| 管道设施用钢法兰、锻件、阀门和部件的通用要求的标准规范
| Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
|
ASTM ANS/ISO 15002-2000
| 医用气体管道系统终端装置用气流量测量装置
| Flow-metering devices for connection to terminal units of medical gas pipeline systems
|
ASTM B 221a-2005
| 铝和铝合金挤压棒材、杆材、金属丝、型材和管道的标准规范
| Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
|
ASTM B 221Ma-2005
| 铝和铝合金挤压棒材、杆材、金属丝、型材和管道的标准规范(米制)
| Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
|
ASTM B 345/B 345M-2002
| 气体和油传输和配送管道系统用铝及铝合金无缝管和无缝挤制管标准规范
| Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
|
ASTM B 423-2005
| 镍铁铬钼铜合金无缝管道标准规范(UNS N08825 and N08221)
| Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
|
ASTM B 444-2004
| 镍铬钼钶合金管和镍铬钼硅合金管道的标准规范
| Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
|
ASTM B 698-2002
| 无缝铜和铜合金管和管道的标准分类
| Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
|
ASTM B 790/B 790M-2000
| 涵洞、排水和其它地下管道用波纹铝管、管拱和拱结构设计的标准实施规程
| Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
|
ASTM C 1003-1983
| 用校验热盒法测量冷气管道管段的热特性的试验方法
| Test Method for Thermal Performance of Cooling-Air Duct Sections, Using a Calibrated Hot Box
|
ASTM C 1071-2005
| 纤维玻璃管道衬里绝缘材料(隔热和吸音材料)标准规范
| Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
|
ASTM C 1091a-2003
| 上釉陶土管道的水压渗入检验的标准试验方法
| Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
|
ASTM C 1173-2006
| 地下管道系统用柔性过渡管联接器的标准规范
| Standard Specification for Flexible Transition Couplings for Underground Piping Systems
|
ASTM C 118a-2005
| 灌溉或排水用混凝土管道标准规范
| Standard Specification for Concrete Pipe for Irrigation or Drainage
|
ASTM C 118Ma-2005
| 灌溉或排水用混凝土管道标准规范
| Standard Specification for Concrete Pipe for Irrigation or Drainage [Metric]
|
ASTM C 1440-2003
| 雨水、废物和通风(DWV)、下水道、卫生和暴雨管道系统用热塑性弹性(TPE)垫圈材料标准规范
| Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
|
ASTM C 1478-2006
| 加筋混凝土暴雨排水沟设施、管道和横向排水沟间的排水沟回弹性连接件的标准规范
| Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
|
ASTM C 1478M-2003
| 加筋混凝土排暴雨污水结构、管道和横向排水沟间的暴雨排水沟弹性连接件标准规范
| Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals [Metric]
|
ASTM C 1534-2004
| 用作管道系统吸热吸声衬垫的软质聚合物泡沫薄片的标准规范
| Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
|
ASTM C 1540-2004
| 重型有套连接器连接无毂铸铁污水管道和管配件的标准规范
| Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
|
ASTM C 302-1995
| 预制包覆管道用隔热材料密度和尺寸的标准试验方法
| Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
|
ASTM C 428-2005
| 石棉水泥无压污水管道的标准规范
| Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe
|
ASTM C 541-1998
| 石棉水泥管道用衬料标准规范
| Standard Specification for Linings for Asbestos-Cement Pipe
|
ASTM C 663-1998
| 石棉水泥排雨水管道标准规范
| Standard Specification for Asbestos-Cement Storm Drain Pipe
|
ASTM C 667-1992
| 环境温度空气以上管道操作和设备的预制纤维反射绝缘的标准规范
| Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
|
ASTM C 822-2006
| 混凝土管道和相关产品的标准术语
| Standard Termninology Relating to Concrete Pipe and Related Products |
ASTM C 828-2003
| 上釉陶土管道的低压空气试验的标准试验方法
| Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
|
ASTM C 875-1998
| 石棉水泥管道标准规范
| Standard Specification for Asbestos-Cement Conduit
|
ASTM C 890-2006
| 用于设计最小负荷结构的整体或分段预制混凝土贮水和废水管道的标准实施规程
| Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
|
ASTM C 924-2002
| 低压空气试验法测试混凝土污水管道的标准实施规程
| Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
|
ASTM C 924M-2002
| 低压空气试验法测试混凝土污水管道标准实施规程(米制)
| Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
|
ASTM C 966-1998
| 石棉水泥无压管道的安装标准指南
| Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
|
ASTM C 969-2002
| 安装的预制混凝土污水管道的表面渗入和渗出的验收检验的标准实施规程
| Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
|
ASTM C 969M-2002
| 安装的预制混凝土污水管道的表面渗入和渗出的验收检验的标准实施规程(米制)
| Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
|
ASTM C 971-1982
| 加热、通风和空气调节管道用绝热体系的选择和应用
| Selection and Application of Insulation Systems for Heating, Ventilating and Air Conditioning Duct Work
|
ASTM C 990a-2003
| 使用预制挠性接缝密封胶的混凝土管道、人孔和预制箱形件的接缝的标准规范
| Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
|
ASTM C 990Ma-2003
| 使用预制挠性接缝密封胶的混凝土管道、人孔和预制箱形件的接缝的标准规范(米制)
| Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants [Metric]
|
ASTM D 1599-1999
| 塑料管道和配件耐短时液压力的标准试验方法
| Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
|
ASTM D 2564-2004
| 聚氯乙烯(PVC)塑料管道系统用液态粘结剂的的标准规范
| Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
|
ASTM D 2837-2004
| 获得热塑性管道材料静水压设计基数和热塑管道制品压力设计基数的标准试验方法
| Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
|
ASTM D 3138-2004
| 丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯无压管道系统构件之间转换接头用液态粘结剂的标准规范
| Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
|
ASTM D 3140-1990
| 扩口聚烯烃管及管道系统
| Flaring Polyolefin Pipe and Tubing
|
ASTM D 3491-1992
| 硫化橡胶容器和管道内衬的试验方法
| Test Methods for Vulcanizable Rubber Tank and Pipe Lining
|
ASTM D 5013-1989
| 管道和其他地点排放的废弃物的取样
| Sampling Wastes from Pipes and Other Point Discharges
|
ASTM D 5243-1992
| 在地下管道水的明渠流量测量的试验方法
| Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
|
ASTM D 5503-1994
| 管道仪表的天然气抽样处理和调节系统标准规程
| Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation
|
ASTM D 5642-1999
| 密封管道化学兼容性试验的标准试验方法
| Standard Test Method for Sealed Tube Chemical Compatibility Test
|
ASTM D 5926-2004
| 排水管、排废水和排气管(DWV)、下水沟、卫生设施和暴雨管道系统用聚氯乙烯垫圈的标准规范
| Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
|
ASTM D 6070-2002
| 预组装的电线和电缆用光壁可盘绕的聚乙烯(PE)管道物理特性的标准试验方法
| Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
|
ASTM D 6167-1997
| 地球物理测井管道钻孔的标准指南:机械卡钳
| Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
|
ASTM D 6190-1997
| 通过土壤埋葬的试验室模仿对管道涂层的阴极非结合的标准试验方法
| Standard Test Method for Cathodic Disbonding of Pipeline Coatings by Laboratory Simulation of Soil Burial
|
ASTM D 6676-2001
| 用内部加热测定高温下外部管道镀层的阴极断接的标准试验方法
| Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating
|
ASTM E 2029-1999
| 用示踪气体稀释法测量管道中体积和质量流量率的标准试验方法
| Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
|
ASTM E 2096-2005
| 远程现场试验法现场检验铁磁热交换器管道的标准规程
| Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
|
ASTM E 213-2004
| 金属管道超声检验的标准实施规范
| Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing
|
ASTM E 2336-2004
| 耐火润滑脂管道密封系统的标准试验方法
| Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
|
ASTM E 2342-2003
| 管道密封剂的耐久检验的标准试验方法
| Standard Test Method for Durability Testing of Duct Sealants
|
ASTM E 273-2001
| 焊接管道焊接区域的超声波检验标准实施规程
| Standard Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing
|
ASTM F 1006-1986
| 船用管道装置用液滴分离器
| Entrainment Separators for Use in Marine Piping Applications
|
ASTM F 1007-1986
| 套装滑动成型或船用管道膨胀节
| Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
|
ASTM F 1041-2002
| 聚烯烃燃气压力管和管道的燃气排除的标准指南
| Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
|
ASTM F 1120-1987
| 管道用循环金属风箱型膨胀节
| Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
|
ASTM F 1155-1998
| 管道系统材料的选择与应用标准实施规程
| Standard Practice for Selection and Application of Piping System Materials
|
ASTM F 1173-2001
| 船舶用热固性树脂玻璃纤维管道系统标准规范
| Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
|
ASTM F 1199-1988
| 铸造(各种温度及各种压力)和焊接管道过滤器(最大表压为150磅/英寸及最大温度150华氏度)
| Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)
|
ASTM F 1200-1988
| 制造好的(焊接)管道过滤器(表压大于150磅/英寸及温度为150华氏度)
| Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
|
ASTM F 1201-1988
| 温度大于零华氏度的管道用流体调节器配件
| Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
|
ASTM F 1335-2004
| 高温设备用标定压力的复合管道及其配件标准规范
| Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service
|
ASTM F 1387-1999
| 管道机械附联配件的性能标准规范
| Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
|
ASTM F 1417-1992
| 使用低压空气对塑料自流排水管道安装验收方法
| Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
|
ASTM F 1429-1999
| 使用挠性弹性密封件装在承接口处的地下塑料管道接头装配力的测试方法
| Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
|
ASTM F 1476-2001
| 管道用装衬垫的机械联接器性能的标准规范
| Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
|
ASTM F 1548-2001
| 管道用装衬垫的机械联接器配件性能标准规范
| Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
|
ASTM F 1563-2001
| 聚乙烯(PE)气体管道或管子用挤出工具的标准规范
| Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
|
ASTM F 1606-2005
| 带变形聚乙烯(PE)内衬的下水道和管道复原的标准实施规程
| Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
|
ASTM F 1698-2002
| 排污管和管道修复用聚氯乙烯异型条衬里和水泥薄浆安装的标准实施规程
| Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
|
ASTM F 1735-2002
| 修复带人孔管道的PVC衬底用聚氯乙烯(PVC)异型带材的标准规范
| Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
|
ASTM F 1741-2005
| 现有排水沟和管道修复用机械螺旋缠绕聚氯乙烯(PVC)内衬管安装的标准规程
| Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
|
ASTM F 1743-1996
| 对现有硫化固定硫化热固树脂管牵入安装管线和管道修复的标准规程
| Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
|
ASTM F 1947-2004
| 折叠聚氯乙烯(PVC)管进入现有排水管和管道中的安装标准实施规程
| Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
|
ASTM F 2014-2000
| 管道系统用非增强挤制T形接头标准规范
| Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
|
ASTM F 2019-2003
| 通过玻璃纤维增强塑料(GRP)现场硫化热固性树脂管(CIPP)的现场拖拉安装修复已有管道的标准操作规程
| Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
|
ASTM F 2164-2002
| 使用静液压的聚乙烯压力管道系统的现场泄漏试验的标准实施规范
| Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
|
ASTM F 2176-2002
| 机械连接件用聚乙烯导管,排泄管和内部管道的标准规范
| Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
|
ASTM F 2207-2002
| 金属输气管道复原用硫化固定内部管道系统的标准规范
| Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
|
ASTM F 2231-2002
| 压力管道用聚乙烯薄样品的却贝冲击试验的标准试验方法
| Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
|
ASTM F 2330-2004
| 评价多层聚烯烃管道耐热氯化水氧化的标准试验方法
| Standard Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water
|
ASTM F 2349-2004
| 集成天然气管道和光纤系统的操作和维护的标准规程
| Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems
|
ASTM F 2389-2006
| 压力标定的聚丙烯管道系统的标准规范
| Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
|
ASTM F 2550-2006
| 通过电扫描电流流经管壁的振动确定下水管道漏洞方位的标准实施规程
| Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall
|
ASTM F 441/F 441M-2002
| 氯化聚氯乙烯(CPVC)塑料管道的标准规范(40和80号表)
| Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
|
ASTM F 481-1997
| 化粪池沥滤场用热塑性管道和波纹软管的安装标准实施规范
| Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
|
ASTM F 628-2006
| 有泡沫填充料的丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料雨水管、污水管和通风管道标准规范.表40
| Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
|
ASTM F 645-2004
| 热塑性水压管道系统的选择、设计和安装的标准指南
| Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems
|
ASTM F 683a-2003
| 管道和机械用热绝缘材料选择和应用的标准规程
| Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
|
ASTM F 690-1986
| 热塑性压力管道灌溉系统的地下安装标准规程
| Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
|
ASTM F 704-1981
| 管道系统法兰接头用螺栓长度选择的标准实施规程
| Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
|
ASTM F 708-1992
| 硬质管道支架的设计与安装标准规程
| Standard Practice for Design and Installation of Rigid Pipe Hangers
|
ASTM F 721-1981
| 标准管道组装件
| Standard Specification for Gage Piping Assemblies
|
ASTM F 722-1982
| 船上管道系统用焊接接头标准规范
| Standard Specification for Welded Joints for Shipboard Piping Systems
|
ASTM F 771-1999
| 聚乙烯(PE)热塑高压灌溉管道系统规范
| Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
|
ASTM F 948-1994
| 在恒定内流动压力下塑料管道系统和组件损坏时间的标准试验方法
| Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
|
ASTM G 10-1983
| 管道涂层比可弯性的试验方法
| Standard Test Method for Specific Bendability of Pipeline Coatings
|
ASTM G 11-2004
| 室外气候老化对管道涂层的影响的标准试验方法
| Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings
|
ASTM G 12-1983
| 钢制管道涂层厚度无损测量的试验方法
| Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
|
ASTM G 14-2004
| 管道涂层抗冲击性的标准试验方法(落锤试验)
| Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
|
ASTM G 17-1988
| 管道涂层抗穿透性的试验方法(钝头杆)
| Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
|
ASTM G 18-1988
| 镀层管道连接件,配件及搭接板的试验方法
| Test Method for Joints, Fittings and Patches in Coated Pipelines
|
ASTM G 19-2004
| 直接土埋法测定管道涂层抗剥落特性的标准试验方法
| Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial
|
ASTM G 20-1988
| 管道涂层抗化学药物腐蚀性的试验方法
| Test Method for Chemical Resistance of Pipeline Coatings
|
ASTM G 42-1996
| 在高温条件下管道覆层阴极剥离合作用的试验方法
| Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
|
ASTM G 55-1988
| 评定管道涂覆搭接材料的试验方法
| Test Method for Evaluating Pipeline Coating Patch Materials
|
ASTM G 6-1988
| 管道涂层耐磨性的试验方法
| Test Method for Abrasion Resistance of Pipeline Coatings
|
ASTM G 62-1987
| 假期检测管道覆层的测试方法
| Standard Test Methods for Holiday Detection in Pipeline Coatings
|
ASTM G 70-1981
| 管道涂层环形可弯曲性的试验方法(压实试验)
| Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
|
ASTM G 8-1996
| 管道涂层阴极剥离的标准试验方法
| Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
|
ASTM G 80-1988
| 管道覆层比阴极剥落性的试验方法
| Test Method for Specific Cathodic Disbonding of Pipeline Coatings
|
ASTM G 9-1987
| 管道涂层渗水性的试验方法
| Test Method for Water Penetration into Pipeline Coatings
|
ASTM G 95-1987
| 管道覆层阴极剥离检测的测试方法(化学腐蚀电解槽法)
| Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
|
IEEE 1235-2000
| 地下电力电缆和管道用可识别护套的性能指南
| (Guide for the properties of identifiable jackets for underground power cables and ducts)
|
IEEE 622A-1984
| 发电站管道电加热控制及报警系统的设计及安装用推荐规程
| (Recommended practice for the design and installation of electric pipe heating control and alarm systems for power generating stations)
|
IEEE 628-2001
| 核电站1E级电路的电缆管道系统的设计、安装和鉴定标准
| (Criteria for the design, installation, and qualification of raceway systems for class 1E circuits for nuclear power generating stations)
|
UL 1713-2001
| 地下消防设备用玻璃纤维增强压力管道和管联接器
| (Pressure pipe and couplings, glass fiber-reinforced, for underground fire service )
|
UL 1812-1995
| 管道热回收通风机
| (Ducted heat recovery ventilators )
|
UL 1815-2001
| 非管道热回收通风机
| (Nonducted heat recovery ventilators )
|
UL 181A-1994
| 同刚性空气管道及空气连接管一起使用的密闭系统
| (Closure systems for use with rigid air ducts and air connectors )
|
UL 1951-1994
| 电线管道附件
| (Electric plumbing accessories )
|
UL 2221-2001
| 耐火润滑脂输送管道附件的试验
| (Tests of fire resistive grease duct enclosure )
|
UL 268A-1998
| 管道烟雾探测器
| (Smoke detectors for duct application )
|
UL 5-1996
| 地面金属电缆管道和配件
| (Surface metal raceways and fittings )
|
UL 567-2003
| 石油产品和液化石油气用管道连接器
| (Pipe connectors for petroleum products and LP-Gas )
|
UL 5A-2003
| 地面非金属电缆管道和配件
| (Nonmetallic surface raceways and fittings )
|
UL 5B-1997
| 支撑式管道和配件
| (Strut-type channel raceways and fittings )
|
UL 5C-1998
| 用于数据,信号和控制线路的地面电缆管道和配件
| (Surface raceways and fittings for use with data, signal, and control circuits )
|
UL 971-1995
| 输送可燃液体用非金属地下管道
| (Nonmetallic underground piping for flammable liquids )
|
编号 | 中文名称 | 英文名称 |