法国管道标准(NF pipe standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号中文名称英文名称
NF A05-671-2001 海底管道的阴极保护 (Cathodic protection for submarine pipelines.)
NF A48-810-1995 燃气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.)
NF A48-810/A1-1999 燃气管道用球墨铸铁管、配件、附件及其接头.要求和试验方法 (Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.)
NF A48-830-1983 铸制产品.有压力的饮用水聚氯乙烯管道用球墨铸铁接头 (Foundry products. Spheroidal graphite cast iron sittings for PVC drinking water pipes under pressure.)
NF A48-840-1984 铸造产品.铸制产品.球墨铸铁管道部件.法兰盘系列.法兰盘.定义.尺寸.规范 (FOUNDRY PRODUCTS. SPHEROIDAL GRAPHITE CAST IRON PIPES. FLANGES SERIES. FLANGES DEFINITION. DIMENSIONS. SPECIFICATIONS.)
NF A48-850-1984 铸造产品.溢流管用球墨铸铁管道部件.溢流管.承插件系列.技术规范 (FOUNDRY PRODUCTS. DUCTILE CAST IRON PIPING ELEMENTS FOR PRE-INSULATED PIPELINE. PRE-INSULATED PIPES,SOCKET SERIE. TECHNICAL SPECIFICATION.)
NF A48-851-1985 铸造产品.压力管道用球墨铸铁管.聚氨酯涂层 (FOUNDRY PRODUCTS. DUCTILE IRON PIPES FOR PRESSURE PIPELINES. POLYURETHAN EXTERNAL COATING.)
NF A48-860-1981 铸造产品.承压管道用可锻铸铁管道部件.承插系列.GS快速接头.连接尺寸和连接附件 (Foundry products. Ductile cast iron piping elements. Socket serie. GS express joint. Assembly dimensions and joint accessories.)
NF A48-870-1981 铸造产品.承接管道用可锻铸铁管道部件.承插系列.GS标准接头.连接尺寸和连接附件 (Foundry products. Ductile cast iron piping elements. Socket series. GS standard joint. Assembly dimensions and joint accessories.)
NF A48-902-1985 铸造产品.压力管道用球墨铸铁管.离心水泥砂浆内饰面.新涂覆砂浆成分的控制 (Foundry products. Ductile iron pipes for pressure pipelines. Contrifugal cement mortar internal lining. Composition controls of freshly applied mortar.)
NF A49-117-1985 钢管.管道和其他用途光端无缝钢管.铁素体和奥氏体不锈钢.尺寸.交货技术条件 (Steel tubes. Seamless plain end tubes for pipes-lines and other uses. Ferritic and austenitic stainless steels. Dimensions. Technical delivery conditions.)
NF A49-147-1980 钢管.一般用和管道用光端纵向焊接钢管.奥氏体不锈钢.(尺寸.交货技术条件.) (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
NF A49-148-1980 钢管.一般用和管道用光端纵向焊接钢管.铁素体不锈钢.(尺寸.交货技术条件.) (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. FERRITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
NF A49-170-1-1999 对缝焊接管道配件.第1部分:一般使用和无特殊检验要求的锻碳钢 (Butt-welding pipe fittings - Part 1 : Wrought carbon steel for general use and without specific inspection requirements.)
NF A49-750-1994 地下热水预绝缘耦合管道系统.钢制给水管,聚亚胺脂热绝缘和聚乙烯外套的管道装置 (Preinsulated bonded pipe systems for underground hot water networks. Pipe assembly of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.)
NF A49-751-1994 地下热水管网的预隔热粘结管道系统.钢制供水管配件、聚氨基甲酸乙酯热绝缘材料以及高密度聚乙烯外壳 (Preinsulated bonded pipe systems for underground hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.)
NF A51-126-1-2001 铜和铜合金.空气调节和制冷用无缝圆形铜管.第1部分:管道系统用管 (Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1 : tubes for piping systems.)
NF A72-120-1973 钢铁厂.气体管道和大直径阀.带法兰的接头(PN6) (LARGE DIAMETER PIPES AND VALVES FOR GASEOUS FLUIDS. FLANGE CONNECTIONS PN 6.)
NF A91-701-1999 表面处理.工厂水箱,管道和设备的识别.安全标志 (Surface treatment. Identification of workshop tanks, piping and equipment. Safety marking.)
NF C30-400-2003 地下管道和电缆用电磁波探测器.性能和安全 (Electromagnetic locators for buried pipes and cables - Performance and safety.)
NF C46-304-1991 用于工业过程管道的传感器.单个系列试验和检验指南 (Transmitters for use in industrail-process control systems. Guidance for inspection and routing testing.)
NF C68-111/A11-2002 电缆管理用管道系统.第2-1部分:刚性管道系统的特殊要求 (Conduit systems for cable management - Part 2-1 : particular requirements for rigid conduit systems.)
NF C68-112/A11-2002 电缆管理用管道系统.第2-2部分:挠性管道系统的特殊要求 (Conduit systems for cable management - Part 2-2 : particular requirements for pliable conduit systems.)
NF C68-113/A11-2002 电缆管理用管道系统.第2-3部分:软性管道系统的特殊要求 (Conduit systems for cable management - Part 2-3 : particular requirements for flexible conduit systems.)
NF C68-114/A1-2001 电缆管理用电缆安装管道系统.第2-4部分:地下管道系统的特殊要求 (Conduit systems for cable management - Part 2-4 : particular requirements for conduit systems buried underground.)
NF C68-120-1997 电器设备用电缆中继系统和电缆管道系统.第1部分:一般要求 (CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 50 085-1).)
NF C68-120/A1-2002 电气装置的电缆干管和管道系统.第1部分:一般要求 (Cable trunking systems and cable ducting systems for electrical installations - Part 1 : general requirements.)
NF C93-859-1-2001 系列规范:用于管道或直接掩埋的光通讯电缆 (Familly Specification : optical telecommunication cables to be used in ducts or direct buried application.)
NF C93-859-5-2002 单膜光纤电缆(管道/直埋设备) (Single-mode optical fibre cable (duct/direct buried installation).)
NF D36-103-2001 家政学.使用管道气体燃料的家用器具外部连接用(增强)橡胶软管 (Household economy - (Reinforced) flexible rubber tubing for the external connection of domestic appliances using gaseous fuels by networks.)
NF D36-107-1994 家政学.家用管道煤气装置连接用的带机械接头的11号或12号聚酰胺基未增强软管 (Household economy. Flexible piping based on polyamide 11 or 12 for the external connection of domestic appliances using gaseous fuels distributed by networks.)
NF D36-121-1994 家庭节约.网络分配的家用液化气设备末端联结的波纹状金属柔性管道 (Household economy. Corrugated metallic flexible piping for the external connection of domestic appliances using gaseous fuels distributed by networks.)
NF D36-210-2001 建筑物燃气管道工程的螺纹接头再密封的方法 (Means for resealing threaded joints of gas pipework in buildings.)
NF E03-004-1981 螺纹密封的(燃气)管道螺纹(锥形外螺纹和圆柱形内螺纹) (Pipe threads where pressure tight joints are made on the threads (tapered external thread and parallel internal thread).)
NF E03-005-1981 无螺纹密封的(燃气)管道螺纹(圆柱形内螺纹和外螺纹) (Pipe threads where pressure tight joints are not made on the threads (parallel internal and external threads).)
NF E03-161-1982 称作“煤气管道”的管路螺纹.用极限规检查圆柱螺纹.前言 (Checking of parallel pipe threads with limit gauges. Introduction.)
NF E03-162-1982 称作“煤气管道”的管路螺纹.用极限规检查圆柱螺纹.外螺纹检查仪 (Checking of parallel pipe threads with limit gauges. Threaded gauges for screws.)
NF E03-163-1982 称作“煤气管道”的管路螺纹.用极限规检查圆柱螺纹.内螺纹检查仪 (Checking of parallel pipe threads with limit gauges. Threaded gauges for nuts.)
NF E03-165-1984 称作“煤气管道”的管路螺纹.用极限规检查圆柱螺纹.螺纹密封的管道螺纹(按标准NFE03-004) (Checking of pipe threads where pressure tight joints are made on the threards with limit gauges (according to NF E 03-004).)
NF E04-118-1-1995 技术制图.管道的简化表示法.第1部分:通则和正交表示法 (Technical drawings. Simplified representation of pipelines. Part 1 : general rules and orthogonal representation.)
NF E04-118-2-1995 技术制图.管道的简化表示法.第2部分:等角投影 (Technical drawings. Simplified representation of pipelines. Part 2 : isometric projection.)
NF E04-118-3-1996 技术制图.管道的简化表示法.第3部分:通风和排放系统终端部件 (TECHNICAL DRAWINGS. SIMPLIFIED REPRESENTATION OF PIPELINES. PART 3 : TERMINAL FEATURES OF VENTILATION AND DRAINAGE SYSTEMS. (EUROPEAN STANDARD EN ISO 6412-3).)
NF E04-202-1-1996 工业加工用管道、管道元件和仪器.图形符号展示.第1部分:基本要求 (Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 1 : basic requirements.)
NF E04-202-2-1996 工业加工用管道、管道元件和仪器.图形符号表示.第2部分:管道和接头 (Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 2 : pipelines and junctions.)
NF E04-202-3-1996 工业加工用管道、管道元件和仪器.图形符号表示.第3部分:机械传动和流体驱替元件 (Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 3 : mechanical drive and fluid displacement components.)
NF E04-202-4-1996 工业加工用管道、管道元件和仪器.图形符号表示.第4部分:加热设备 (Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 4 : heat equipment.)
NF E04-202-8-2003 工业加工用管道、管道元件和仪器.图形符号表示.第8部分:粉碎、成型和其他工艺 (Pipelines, pipe components and apparatus for industrial processes - Symbolic representation - Part 8 : comminution, shaping and other process.)
NF E04-202-9-2003 工业加工用管道、管道元件和仪器.图形符号表示.第9部分:存储和搬运 (Pipelines, pipe components and apparatus for industrial processes - Symbolic representation - Part 9 : storage, handling.)
NF E09-081-6-1999 机器的安全.气载危险物质排放的评定.第6部分:非管道式排放物质的分离效率 (Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 6 : separation efficiency by mass, unducted outlet.)
NF E09-081-7-1999 机器的安全.气载危险物质排放的评定.第7部分:管道式排放物质的分离效率 (Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 7 : separation efficiency by mass, ducted outlet.)
NF E17-002-1994 封闭管道中水流量的测量.饮用冷水测量计.第1部分:规范 (Measurement of water flow in closed conduits. Meters for cold potable water. Part 1 : specifications.)
NF E17-006-1986 封闭管道中水流量的测量.饮用冷水表.组合表.第1部分:规范 (Measurement of water flow in closed conduits. Meters for cold potable water. Combination meters. Part 1 : specifications.)
NF E17-007-1988 封闭管道中水流量的测定.饮用冷水表.第2部分:安装要求 (Measurement of water flow in closed conduits. Meters for cold potable water. Combination meters. Part 2 : installation requirements.)
NF E17-008-1995 封闭管道中水流量的测量.冷饮用水表.组合水表.第3部分:试验方法 (Measurement of water flow in closed conduits. Meters for cold potable water. Combination meters. Part 3 : test methods.)
NF E29-008-1972 管道.压力和温度.23%镍和4%锰奥氏体球墨合金铸铁部件 (TEMPERATURE AND PRESSURE LIMITATIONS FOR PIPING SYSTEMS MANUFACTURED FROM 23% NICKEL 4% MANGANESE SPHEROIDAL GRAPHITE AUSTENITIC CAST IRON`.)
NF E29-009-1972 管道.压力和温度.20%镍和2%铬奥氏体球墨合金铸铁部件 (TEMPERATURE AND PRESSURE LIMITATIONS FOR PIPING SYSTEMS MANUFACTURED FROM 20% NICKEL 2% CHROMIUM SPHEROIDAL GRAPHITE AUSTENITIC CAST IRON`.)
NF E29-011-1983 管道的术语和定义 (PIPEWORK. TERMS AND DEFINITION.)
NF E29-018-1986 工业管道.凹面或凸面连接的法兰盘连接环.ISO标准压力为2.5到50 (Industrial pipework. Bracing rings for flanges with female (groove or spigot), or male(tongue or spigot) faces. ISO PN 2,5 to ISO PN 50.)
NF E29-032-1985 工业管道.钢制构件.对焊接头.准备 (Industrial pipework. Steel components. Butt welding ends. Preparation.)
NF E29-033-1994 地下热水管道网络的隔热管道系统.钢制供水管道聚氨基甲酸乙酯热绝缘材料及高密度聚乙烯外壳的连接组件 (Preinsulated bonded pipe systems for underground hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.)
NF E29-041-1994 工业管道.减缩的螺栓柄.规范 (INDUSTRIAL PIPEWORK. REDUCED SHANK BOLTS. SPECIFICATIONS.)
NF E29-043-1990 工业管道工程.管道、锅炉和压力容器法兰组件用非合金钢或合金钢制螺栓 (Industrial pipework. Non alloy and alloy. Steel bolting for flanged assemblies of pipeworks, boilers and pressure vessels. Specifications.)
NF E29-134-1978 家用管道燃气设备用带节气阀并与阳端G1/2相连的双连式安全开关 (SAFETY RELEASE DEVICES WITH BUILT-IN STOP TAP AND TWO G 1/2 MALE UNION CONNECTIONS FOR DOMESTIC APPLIANCES USING MAINS GAS FUELS.)
NF E29-204-1992 工业管道系统.锻制钢法兰和套圈.材料.机械性能.制造.试验 (Industrial pipeworks. Forged steel flanges and collars. Materials. Mechanical properties. Fabrication. Tests.)
NF E29-207-1986 工业管道.合金钢法兰盘和卡环及复合材料法兰盘.术语,尺寸,规范 (INDUSTRIAL PIPEWORK. COPPER ALLOYS FLANGES AND COLLARS AND COMPOSITE FLANGES. TERMINOLOGY. DIMENSIONS. SPECIFICATIONS.)
NF E29-210-1985 工业管道.差动压力装置用有孔法兰 (INDUSTRIAL PIPEWORK. ORIFICE FLANGES FOR DIFFERENTIAL PRESSURE DEVICES.)
NF E29-220-1986 工业管道.管道用衔接器和带法兰的可调垫圈.规范 (INDUSTRIAL PIPEWORK. FLANGED ADAPTERS AND DISASSEMBLY SEAL FOR PIPEWORK. SPECIFICATIONS.)
NF E29-251-1972 工业管道.不锈钢制焊接冲压凸缘(薄型系列).公称压力10 (STAMPED STAINLESS-STEEL FILLETS FOR WELDING (THIN SERIES) PN 10)
NF E29-260-1987 工业管道.涂PTFE-FEP-PFA碳氟化树脂的管道构件 (Industrial pipes. Pipe components with PTFE - FEP - PFA fluorocarbon resin.)
NF E29-302-2-1996 工业配件.安装在带法兰的管道中的金属配件结构长度.第2部分:按级别标识的配件 (Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. Part 2 : class-designated valves.)
NF E29-480-1994 地下热水管网的预隔热管道系统.钢制供水管道、聚氨基甲酸乙酯热绝缘材料及高密度聚乙烯外壳的钢阀门组件(欧 (Preinsulated bonded pipe systems for underground hot water networks. Steelvalve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene.)
NF E29-531-1981 管道.凸肩对接的螺纹连接管.标准压力10 (Pipework. Threaded fittings with gasket on shoulder.)
NF E29-539-1981 管道.采暖设备上的球锥连接螺纹连接管部件.标准压力16 (Pipework. Screwed connecting part with a spheroconical function for heating plants.)
NF E29-573-1988 工业管道.“特快“连接管,公称压力”10 (Industrial pipework. “Express“ connections. Maximum permissible working pressure 1 MPa (10 bar).)
NF E29-577-1978 管道.工具和气动机械用的螺纹连接管 (PIPEWORKS. SCREWED CONNECTIONS FOR PNEUMATIC TOOLS AND MACHINES.)
NF E29-591-1-1998 铜和铜合金.管道配件.第1部分:铜管毛细管终端焊接配件 (Copper and copper alloys. Plumbing fittings. Part 1 : fittings with ends for capillary soldering or capillary brazing to copper tubes.)
NF E29-591-2-1998 铜和铜合金.管道配件.第2部分:用于铜管的压缩终端配件 (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 2 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES. (EUROPEAN STANDARD EN 1254-2).)
NF E29-591-3-1998 铜和铜合金.管道配件.第3部分:用于塑料管的压缩终端配件 (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 3 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES. (EUROPEAN STANDARD EN 1254-3).)
NF E29-591-4-1998 铜和铜合金.管道配件.第4部分:用毛细或压缩终端连接于其它终端的配件 (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 4 : FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS. (EUROPEAN STANDARD EN 1254-4).)
NF E29-591-5-1998 铜和铜合金.管道配件.第4部分:铜管毛细管钎焊短末端配件 (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 5 : FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES. (EUROPEAN STANDARD EN 1254-5).)
NF E29-600-1987 工业管道.钢制连接管和螺塞.插接式焊接连接管.螺纹连接管和螺塞 (Industrial pipework. Steel fittings and plugs. Socket welding fittings.)
NF E29-726-1974 真空技术.真空管道用钢管.尺寸 (VACUUM TECHNOLOGY. STEEL TUBES FOR VACUUM PIPES. DIMENSIONS)
NF E29-802-2000 聚乙烯管道系统用带缩终端的可锻铸铁配件 (Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems.)
NF E29-820-1983 管道.金属软管.术语 (Pipeworks. Flexible metal hoses. Terminology.)
NF E29-821-1983 管道.咬边金属软管.规范 (Pipeworks. Flexible interlocked metal hoses. Specifications .)
NF E29-833-1979 管道.双咬边金属软管.(石棉垫片,密封,圆截面,奥氏体不锈钢制) (PIPEWORKS. FLEXIBLE METAL HOSES DOUBLE INTERLOCK,ASBESTOS PACKING,PRESSURE-TIGHT,CIRCULAR SECTION,IN AUSTENITIC STAINLESS STEEL.)
NF E29-834-2003 管道工程.波纹状金属软管和软管组件 (Pipework - Corrugated metal hoses and hose assemblies.)
NF E29-836-1997 管道工程.在爆燃性空气中电缆保护用皱纹软金属管组件(欧洲标准EN ISO 10807) (Pipework. Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere.)
NF E29-850-1974 管道支撑.总则 (PIPE SUPPORTS. GENERAL.)
NF E29-951-1975 工业管道.平面和凹凸面法兰盘的扁豆状垫片.标准外形尺寸64到160.尺寸 (LENSES AND LENS_SHAPED SEALS FOR FLAT OR RAISED FLANGES GN 64 TO GN160.)
NF E29-960-1985 工业管道.大气污染进气管道.术语和定义 (Industrial pipework. Suction pipe for atmospheric polluants. Terms and definitions.)
NF E29-961-1985 工业管道.大气污染进气管道.基本金属部件.规范 (Industrial pipework. Suction pipe for atmospheric polluants. Basic metal components . Specifications.)
NF E29-962-1987 工业管道.大气污染物进气管道.补充金属部件.规范 (Industrial pipework. Suction pipe for atmospheric pollutants. Additionnal metal components . Specifications.)
NF E29-963-1988 工业管道.吸气设备.设计要求的特征.技术登计卡样式 (Industrial pipework. Suction devices. Design requirements. Model for a technical sheet.)
NF E31-330-2-2000 燃油锅炉用供油系统的安装. 第2部分:安全要求和试验.部件,阀门, 管道,过滤器,油充气器,仪表 (Installations for oil supply systems for oil burners - Part 2 : safety requirements and tests : parts, valves, pipes, filters, oil de-aerators, meters.)
NF E35-303-1960 冷冻设备.水果、蛋类、液体、肉类和屠宰物等用途的管道式冷冻模型 (REFRIGERATING SYSTEMS. TUNNEL-TYPE FREEZERS FOR FRUIT,EGGS,LIQUIDS,MEAT,GIBLETS,ETC.)
NF E35-413-2001 冷却系统和热泵.减压装置及其相应管道.计算方法 (Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation.)
NF E35-415-1998 冷冻系统和热泵.系统流程图和管道及结构图.流程图和符号 (REFRIGERATING SYSTEMS AND HEAT PUMPS. SYSTEM FLOW DIAGRAMS AND PIPING AND INSTRUMENT DIAGRAMS. LAYOUT AND SYMBOLS. (EUROPEAN STANDARD EN 1861).)
NF E39-011-2003 区域供暖管道.直埋式热水供暖网用预隔热连接的管道系统.聚氨酯热绝缘和聚乙烯外覆层的用户钢管组件 (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene)
NF E39-012-2003 区域供暖管道.直埋式热水供应网用预隔热连接的管道系统.聚氨酯隔热和聚乙烯外护层的入户钢管用接头组件 (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies for steel service pipes, polyurethane thermal insulation and outer casing of polye)
NF E39-013-2003 区域供暖管道.直埋式热水供应网用预隔热连接的管道系统.聚氨酯隔热和聚乙烯外覆层进宅钢管用钢阀门组件 (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of pol)
NF E39-014-2003 区域供暖管道.直埋式热水供应网用预隔热连接的管道系统.聚氨酯隔热和聚乙烯外覆层的进宅钢管用接合组件 (District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of poluethyl)
NF E48-392-2-2001 液压传动.元件和系统中液载噪音特性的测定.第2部分:管道液流中声音速度的测量 (Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2 : measurement of the speed of sound in a fluid in a pipe.)
NF E49-300-2000 气流动力.通过管道库测定空气借记特性的方法 (Pneumatic fluid power - Method of characterization of air debit coefficients by drains reservoir.)
NF E51-708-2002 建筑物的通风.管道工程.软管的尺寸和机械要求 (Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts.)
NF E51-717-2003 建筑物的通风.管道系统.环形薄金属管道的强度和泄漏 (Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts.)
NF E51-720-1998 建筑物通风.管道作业.一般通风用圆形法兰的尺寸 (Ventilation for buildings. Ductwork. Dimensions of circular flanges for general ventilation.)
NF E51-721-2002 建筑物通风.管道悬吊装置和支撑物.强度要求 (Ventilation for buildings - Ductwork hangers and supports - Requirements for strength.)
NF E51-733-2003 建筑物通风.非金属管.绝缘制管板材制成的管道设施 (Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards.)
NF E58-125-1998 土方机械.安全性.第9部分:管道铺设机的要求 (EARTH-MOVING MACHINERY. SAFETY. PART 9 : REQUIREMENTS FOR PIPELAYERS. (EUROPEAN STANDARD EN 474-9).)
NF E66-153-1990 煤气管道圆柱螺纹手用和机用圆螺丝板牙 (Hand-and machine-operated circular screwing dies for parallel pipe threads. G series.)
NF E66-154-1990 煤气管道锥形螺纹手用和机用圆螺纹板牙 (Hand- and machine-operated circular screwing dies for taper pipe threads. R series.)
NF E86-700-1-2002 金属工业管道.第1部分:总则 (Metallic industrial piping - Part 1 : general.)
NF E86-700-2-2002 金属工业管道.第2部分:材料 (Metallic industrial piping - Part 2 : materials.)
NF E86-700-3-2002 金属工业管道.第3部分:设计和计算 (Metallic industrial piping - Part 3 : design and calculation.)
NF E86-700-4-2002 金属工业管道.第4部分:制造和安装 (Metallic industrial piping - Part 4 : fabrication and installation.)
NF E86-700-5-2002 金属工业管道.第5部分:检测和试验 (Metallic industrial piping - Part 5 : inspection and testing.)
NF F24-003-1968 铁路车辆.轻型器材.管道系统.带复曲支承面套筒和尾端的可拆卸管和前端连接器 (RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. REMOVABLE PIPE AND NOSE COUPLINGS WITH TORIC BEARING SURFACE SLEEVES AND TAIL ENDS.)
NF F24-004-1968 铁路车辆.轻型器材.管道系统.由三个工件组成的带复曲支承面套筒和尾端的可拆卸管和前端连接器 (RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. 3-PIECE REMOVABLE PIPE AND NOSE COUPLINGS WITH TORIC BEARING SURFACE SLEEVES AND TAIL ENDS.)
NF F24-005-1968 铁路车辆.轻型器材.管道系统.摆动式管接头 (RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. SWIVEL CONNECTORS.)
NF J24-020-1957 造船工业.软管.船用管道软管的连接.使用总表 (SHIPBUILDING. FLEXIBLE PIPING. METHODS OF CONNECTING TO SHIPBOARD PIPELINES. GENERAL TABLE.)
NF J40-003-1-2002 船和造船技术.管道系统容量的识别颜色.第1部分:主颜色和媒介 (Ships and marine technology - Identification colour for the content of piping systems - Part 1 : main colours and media.)
NF J41-012-1975 造船工业.海水管道系统.减少腐蚀的测量 (SHIPBUILDING. SEA WATER PIPING SYSTEMS. MEASURES FOR CORROSION REDUCTION.)
NF J82-000-1967 造船工业.管道.标准表 (INLAND NAVIGATION. PIPING. STANDARDS LIST.)
NF J82-214-1967 造船工业.管道.接头.分类和应用 (INLAND NAVIGATION. PIPING. SEALING RINGS. CLASSIFICATION AND USE.)
NF L40-100-1966 飞行器的液体装置.管道接头基本尺寸 (INSTALLATION OF FLUIDS ABOARD AIRCRAFT. BASIC DIMENSIONS OF HOSE CONNECTIONS.)
NF L40-201-1988 管道鉴定方法 (AEROSPACE. PIPELINES. IDENTIFICATION.)
NF L41-210-1983 液体系统.软管、管道和接头的脉冲试验 (Fluid systems. Impulse testing of hose, tubing and fittings.)
NF L43-711-1976 管道连接用V形法兰.外形尺寸 (V BAND COUPLINGS FOR DUCTING AND PIPING. PROFILE DIMENSIONS.)
NF M50-009-2000 燃气供应系统.最大工作压力达(和包括)16巴的燃气管道.功能要求 (Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements.)
NF M51-007-1998 液化天然气装置和设备.为液化天然气管道上用法兰连接设计的垫圈的适配性测试 (INSTALLATIONS AND EQUIPMENT FOR LNG. SUITABILITY TESTING OF GASKETS DESIGNED FOR FLANGED JOINTS USED ON LNG PIPING. (EUROPEAN STANDARD EN 12308).)
NF M82-011-1987 煤矿器材和工具.煤矿器材.风扇型通风管软管道.规范 (Mining equipment. Flexible venting ducts. Ventubes of the blowing type. Specifications.)
NF M82-013-1987 煤矿器材和工具.煤矿器材.吸入型通风管软管道.规范 (MINING EQUIPMENT. FLEXIBLE VENTING DUCTS. VENTUBES OF THE SUCTION TYPE. SPECIFICATIONS.)
NF M87-217-2003 石油和天然气工业.海上建设平台管道系统的设计和安装 (Petroleum and natural gas industries - Design and installation of piping systems on offshore production platforms.)
NF M87-222-2002 石油和天然气工业.管道运输系统.管道宽度 (Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines.)
NF M87-240-2002 石油和天然气工业.作外壳、管道和连接材料用的耐腐蚀合金无缝管.交货技术条件 (Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions.)
NF P16-101-1999 用于液压交换管道,排水系统和废水组份测定的一般要求.(欧洲标志EN773) (General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers.)
NF P16-103-1999 用于气压交换管道,排水系统和废水组份测定的一般要求.(欧洲标志EN1293) (General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers.)
NF P16-120-1998 在各种负载条件下地下管道的结构设计.第1部分:一般要求(EN 1295-1) (Structural design of buried pipelines under various conditions of loading. Part 1 : general requirements.)
NF P16-125-1997 下水管道的铺设和检验 (Construction and testing of drains and sewers.)
NF P16-126-2000 非挖沟结构和管道及排水管的试验 (Trenchless construction and testing of drains and sewers.)
NF P16-150-7-1998 建筑物外管道和污水系统.第6部分:维修和操作(欧洲标准EN 752-7) (DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS. PART 7 : MAINTENANCE AND OPERATIONS. (EUROPEAN STANDARD EN 752-7).)
NF P16-250-2-2000 建筑物内的重力排水系统.第2部分:卫生管道,布局和计算 (Gravity drainage systems inside buildings - Part 2 : sanitary pipework, layout and calculation.)
NF P16-250-3-2000 建筑物内的重力排水系统.第3部分:屋顶管道,布局和计算 (Gravity drainage systems inside buildings - Part 3 : roof drainage, layout and calculation.)
NF P16-304-1997 地下排水管道用纤维水泥管.第1部分:重力循环系统用管子、接头和配件(欧洲标准EN 588-1) (Fibre-cement pipes for sewers and drains. Part 1 : pipes, joints and fittings for gravity systems.)
NF P16-321-1/A3-1999 雨水和污水管道用陶土管、配件及管连接件.第1部分:要求 (Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1 : requirements.)
NF P16-321-3-1992 雨水管和污水管用陶土管、配件和管道连接件.第3部分:试验方法(EN 295-3) (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 3 : test methods.)
NF P16-321-5-1994 排水及污水用陶土管道,配件和管接头.第5部分:多孔陶土管道和配件的要求(EN 295-5) (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 5 : requirements for perforated vitrified clay pipes and fittings.)
NF P16-321-6-1996 排水及污水用陶土管道.配件和管接头.第6部分:陶土管道的出入水孔的要求 (Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 6 : requirements for vitrified clay manholes.)
NF P16-321-7-1996 排水及污水用陶土管道.配件和管接头.第7部分:陶土管道和管道插孔用连接件的要求 (Vitrified clays pipes and fittings and pipe joints for drains and sewers. Part 7 : requirements for vitrified clay pipes and joints for pipe jacking.)
NF P16-325-1-1999 废水系统有插端和管座的径向焊接热浸电镀钢管管道和配件.第1部分:要求,试验和质量控制(EN1123-1) (Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 1 : requirements, testing, quality control.)
NF P16-325-2-1999 废水系统有插端和管座的径向焊接热浸电镀钢管管道和配件.第2部分:尺寸(EN1123-2) (Pipes and fittings of longitudinally welded, hot-dip galvanized steel pipes with spigot and socket for waste water systems. Part 2 : dimensions.)
NF P16-342-1990 排水.排水管道上的混凝土制观察孔用的在工厂加工构件.定义、规范、试验方法、标记、验收条件 (DRAINAGE,SEWERAGE. PRECAST CONCRETE ELEMENTS OF MANHOLES FOR SEWAERAGE NETWORKS. DEFINITIONS SPECIFICATIONS,TESTING METHODS,MARKING,BASIS FOR ACCEPTANCE.)
NF P16-345-1-2003 非加筋、钢筋和加筋混凝土管道和配件 (Concrete pipes and fittings, unreinforced, steel fibre and reinforced.)
NF P16-345-2-2003 非加筋、钢筋和加筋混凝土管道和配件.第2部分:国家规范 (Concrete pipes and fittings, unreinforced, steel fibre and reinforced - Part 2 : national specification.)
NF P16-351-1998 塑料.民用机械用亚地表地下塑料管道系统.规范 (Plastics. Plastics piping system for civil engineering subsoil drainage. Specification.)
NF P16-352-1-1998 非压力地下管道和废水用塑料管道系统.非塑化聚(乙烯,氯乙烯)(PVC-D).第1部分:管道规范,配件和系统 (Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U). Part 1 : specifications for pipes, fittings and the system.)
NF P16-357-1-1997 无压地下排水系统用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统的规范 (Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Part 1 : specifications for pipes, fittings and the system.)
NF P16-357-1/A1-2002 无压地下排水系统用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统的规范 (Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.)
NF P16-358-1-2001 地下和地上排水和排污用塑料压力管道系统.未增塑聚氯乙烯(PVC-U).第1部分:管道元件和系统规范 (Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for piping components and the system.)
NF P16-360-2002 塑料管道系统.无压地下排水系统用管道系统.耐热循环和外部负载的试验方法 (Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading.)
NF P16-361-3-1997 无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第3部分:配件 (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 3 : fittings.)
NF P16-361-5-1997 无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第5部分:接头的适用性 (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 5 : fitness for purpose of the joints.)
NF P16-361-6-1997 无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第6部分:安装实施规程 (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 6 : practices for installation.)
NF P16-364-1-2003 地下非压力排水和污水管网更新用塑料管道系统.第1部分:总则 (Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1 : general.)
NF P16-364-3-2003 地下非压力排水和污水管网更新用塑料管道系统.第3部分:紧配合管用衬层 (Plastics piping systems for renovation of underground non-pressure drainage and sewerage network - Part 3 : lining with close-fit pipes.)
NF P16-364-4-2003 地下非压力排水和污水网用塑料管道系统.第4部分:现场固化管用的管衬 (Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes.)
NF P36-411-1-2000 地上外部用塑料雨水管道系统.第1部分:非塑化聚氯乙烯(PVC-U)管道系统.第1部分:管,配件和系统规范 (Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for pipes, fittings and the system.)
NF P40-201/A1-1999 DTU 60.1.建筑工程.人居住的建筑物内的卫生管道.技术规范 (DTU 60.1 - Building works - Sanitary plumbing in residencial buildings - Technical specifications.)
NF P40-201/A2-2000 DTU 60.1.建筑工程.人居住的建筑物内的卫生管道.技术规范 (DTU 60.1 - Building works - Sanitary plumbing in residential buildings - Technical specifications.)
NF P41-030-1999 有机材料对饮用水的影响.管道系统中水味道的测定.第1部分:试验方法 (Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Part 1 : test method.)
NF P41-031-1-2002 有机物质对人类生活用水的影响.有机物质.管道系统中水的颜色和浊度的测定.第1部分:试验方法 (Influence of materials on water intended for human consumption - Organic materials - Determination of colour and turbidity of water in piping systems - Part 1 : test method.)
NF P41-211/A1-2000 DTU 60.31.建筑工程.非塑化聚氯乙烯管道安装.压力下冷水.技术规范 (DTU 60.31 - Building works - Unplasticized polyvinyl chloride piping installation - Cold water under pressure - Technical specifications.)
NF P41-212/A1-2000 DTU 60.32.建筑工程.非塑化聚氯乙烯管道安装.雨水下水管道.技术规范 (DTU 60.32 - Building works - Unplasticized polivinyl chloride piping installation - Rainwater downpipes - Technical specifications.)
NF P41-213-1993 DTU 60-32.建筑工程.未增塑聚氯乙烯管道安装.废水排放.技术规范 (DTU 60.33 - Building works - Unplasticized polyvinyl chloride piping installations - Waste water drainage - Technical specifications.)
NF P41-213/A1-2000 DTU 60.33.建筑工程.非塑化聚氯乙烯管道安装.废水排水管.技术规范 (DTU 60.33 - Building works - Unplasticized polyvinyl chloride piping installations - Waste water drainage - Technical specifications.)
NF P41-220/A1-1999 DTU 60.2.建筑工程.土壤水,雨水,废水排水铸铁管道的技术规范 (DTU 60.2 - Building works - Cast ison pipes for soil water, rain water and waste water drainage - Technical specification.)
NF P41-220/A2-2000 DTU 60.2.建筑工程.土壤水,雨水,废水排水铸铁管道的技术规范 (DTU 60.2 - Building works - Cast iron for soil water, rain water and waste water drainage - Technical specifications.)
NF P41-221/A1-1999 DTU 60.5.建筑工程.铜管道.家用冷热水供应管道.废水,雨水排放管和空调安装管.技术规范 (DTU 60.5 - Building works - Copper piping. Supply of hot and cold domestic water, drainage of waste water, rainwater, air conditioning installations - Technical specifications.)
NF P41-221/A2-2000 DTU 60.5.建筑工程.铜管道.家用冷热水供应管道.废水,雨水排放管和空调安装管.技术规范 (DTU 60.5 - Building works - Coper piping - Supply of hot and cold domestic water, drainage of waste water, rainwater, air conditioning installations - Technical specifications.)
NF P41-302-1994 纤维水泥制品.压力管道和接头(欧洲标准EN 512) (Fibre-cement products. Pressure pipes and joints.)
NF P45-200-1998 燃气供应.燃气管道工程和建筑.大于或等于5Bar的最大操作压力.功能推荐 (Gas supply - Gas pipework for buildings - Maximum operating pressure inferior or equal to 5 bar - Functional recommendations.)
NF P45-200/A1-2000 燃气供应.建筑物的燃气管道工程.小于或等于5巴的最大操作压力.功能推荐 (Gas supply - Gas pipework for buildings - Maximum operating pressure up to and including 5 bar - Functional recommendations.)
NF P45-200/A2-2002 燃气供应.建筑物的燃气管道工程.高达和包括5巴的最大操作压力.功能推荐 (Gas supply - Gas pipework for buildings - Maximum operating pressure up to and including 5 bar - Functional recommendations.)
NF P50-749-5-2000 建筑物产品和元件的热性能.实验室测量热传输性能的评价的特殊标准.第5部分:管道实验方法测量 (Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5 : measurements by pipe test methods.)
NF P52-305-1/A1-1999 DTU 65.10.建筑工程.建筑物内雨水和废水排空用冷热压力水用管道.排空的一般规则.第1部分:技术规范 (DTU 65.10 - Building works - Piping used for cold and hot pressure water and piping for evacuation waste water and rain water inside buildings - General rules of execution - Part 1 : technical specifications.)
NF P52-305-1/A2-2000 DTU 65.10.建筑工程.建筑物内雨水和废水排空用冷热压力水用管道.排空的一般规则.第1部分:技术规范 (DTU 65.10 - Building works - Piping used for cold and hot pressure water and piping for evacuation waste water and rain water inside buildings - General rules of execution - Part 1 : technical specifi)
NF P52-305-2-1993 DTU 65-10.建筑工程.个人合同.用于冷和热压力水和建筑物内排除废水和雨水的管道的铺设.排除的一般规则.第2 (DTU 65-10. BUILDING WORKS. PRIVATE CONTRACTS. PIPING USED FOR COLD AND HOT PRESSURE WATER AND PIPING FOR EVACUATION WASTE WATER AND RAIN WATER INSIDE BUILDINGS. GENERAL RULES OF EXECUTION. PART 2 : SPECIAL CLAUSES.)
NF R95-403-1970 双锥套管道接头.连接尺寸 (PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. COUPLING DIMENSIONS.)
NF R95-404-1968 锥颈双拼式管道接头 (PIPE FITTINGS IN TWO PARTS WITH TAPERED BEARING.)
NF R95-405-1970 双锥套管道接头.插入件 (PIPE FITTINGS WITH DOUBLE TAPER SLEEVES. INSERTS.)
NF S31-063-2003 声学.风机和其他风动设备辐射入管道中的声功率的测定.管道法 (Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method.)
NF S95-154-1998 医用气体管道系统.第2部分:麻醉气体清除处理系统.基本要求 (Medical gas pipeline systems - Part 2 : anaesthetic gas scavenging disposal systems - Basic requirements.)
NF S95-154/A1-2000 医用输气管道系统.第2部分:麻醉气体清除处置系统.基本要求 (Medical gas pipeline systems - Part 2 : anaesthetic gas scavenging disposal systems - Basic requirements.)
NF S95-155-2000 医用气体管道系统.第3部分:压缩医用气体管道和真空管道 (Medical gaz pipeline systems - Part 3 : pipelines for compressed medical gases and vacuum.)
NF S95-162-1998 医用气体管道系统.第1部分:医用压缩气体和真空装置的终端元件 (Medical gas pipeline systems. Part 1 : terminal units for compressed medical gases and vacuum.)
NF S95-163-1998 医用气体管道系统.第4部分:麻醉气体清除系统的终端元件 (Medical gas pipeline systems. Part 4 : terminal units for anaesthetic gas scavenging systems.)
NF S95-169-1999 与医用气体管道系统终端元件连接的流量测量设备 (Flow-metering devices for connection to terminal units of medical gas pipeline systems.)
NF T47-301-1972 橡胶.管道接头用压制和模制合成橡胶垫圈和型材.材料的一般特性 (RUBBER MOLDED AND EXTRUDED SEALING RINGS AND PROFILES FOR PIPE WORK. GENERAL SPECIFICATIONS OF MATERIALS.)
NF T47-305-1/A2-2003 弹性密封件.给水排水用管道连接密封件的材料要求.第1部分:硫化橡胶 (Elastomeric seals - Material requirements for pipe joints seals used in water and drainage applications - Part 1 : vulcanized rubber.)
NF T47-305-2/A1-2003 弹性密封件.给水排水用管道连接密封件的材料要求.第2部分:热塑弹性体 (Elastomeric seals - Material requirements for pipe joints seals used in water and drainage applications - Part 2 : thermoplastic elastomers.)
NF T47-305-3/A1-2003 弹性密封件.给水排水用管道连接密封件的材料要求.第3部分:硫化橡胶多孔材料 (Elastomeric seals - Material requirements for joint seals used in water and drainage applications - Part 3 : cellular materials of vulcanized rubber.)
NF T47-305-4/A1-2003 弹性密封件.给水排水用管道连接密封件的材料要求.第4部分:聚氨酯密封铸件 (Elastomeric seals - Material requirements for pipe joint seals in water and drainage applications - Part 4 : cast polyurethane sealing elements.)
NF T47-306-2003 弹性密封件.输送气体和碳氢液体的管道和配件用密封件的材料要求 (Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids.)
NF T54-006-2003 塑料管道系统.未增塑聚氯乙烯管.检验规定温度下抗二氯甲烷的试验方法 (Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT).)
NF T54-007-1994 塑料管道系统.压力管和配件的机械接合.在恒定应力下抗拔出性能的试验方法 (THERMOPLASTICS PIPING SYSTMES. END-LOAD BEARING MECHANICAL JOINTS BETWEEN PRESSURE PIPES AND FITTINGS. TEST METHOD FOR RESISTANCE TO PULL-OUT UNDER CONSTANT LONGITUDINAL FORCE. (EUROPEAN STANDARD EN 712).)
NF T54-008-1994 塑料管道系统.配件和聚烯烃压力管的机械接合.在弯曲时内部压力引起的密封性的试验方法 (PLASTICS PIPING SYSTEMS. MECHANICAL JOINTS BETWEEN FITTINGS AND POLYOLEFIN PRESSURE PIPES. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL PRESSURE OF ASSEMBLIES SUBJECTED TO BENDING. (EUROPEAN STANDARD EN 713).)
NF T54-009-1994 热塑料管道系统.压力管和模塑配件的合成橡胶密封环型接合.在无轴向推力时内部流体静力学压力下密封性的试验 (THERMOPLASTICS PIPING SYSTEMS. NON-END-LOAD-BEARING ELASTOMERIC SEALING RING TYPE JOINTS BETWEEN PRESSURE PIPES AND MOULDED FITTINGS. TEST METHOD FOR LEAKIGHTNESS UNDER INTERNAL HYDROSTATIC PRESSURE WITHOUT END THRUST. (EUROPEAN STANDARD EN 714).)
NF T54-010-1994 塑料管道系统.压力管和配件的机械和胶合接合.在包含轴向推力的内部水压下密封性的试验方法 (THERMOPLASTICS PIPING SYSTEMS. END-LOAD BEARING JOINTS BETWEEN SMALL DIAMETER PRESSURE PIPES AND FITTINGS. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL WATER PRESSURE, INCLUDING END THRUST. (EUROPEAN STANDARD EN 715).)
NF T54-012-1995 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头.外部液压条件下防漏密封试验方法 (PLASTICS PIPING SYSTEMS. ELASTOMERIC SEALING RING TYPE JOINTS AND MECHANICAL JOINTS FOR THERMOPLASTICS PRESSURE PIPING. TEST METHOD FOR LEAKTIGHTNESS UNDER EXTERNAL HYDROSTATIC PRESSURE. (EUROPEAN STANDARD EN 911).)
NF T54-015-1997 塑料管道系统.热塑阀门.抗内压和防泄漏的试验方法 (Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness.)
NF T54-016-1-1999 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第1部分:概述 (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : general.)
NF T54-016-2-1999 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第2部分:管子 (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2 : pipes.)
NF T54-016-3-1999 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第3部分:配件 (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3 : fittings.)
NF T54-016-4-1999 供水用塑料管道系统.未增塑聚氯乙烯.第4部分:管件和附件 (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4 : valves and ancillary equipment.)
NF T54-016-5-1999 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第5部分:系统使用的适用性 (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5 : fitness for purpose of the system.)
NF T54-017-1-1999 建筑物内土壤和废物排放用塑料管道系统(低温和高温).未增塑聚氯乙烯(PVC-U).第1部分:管道、配件和系统的规 (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Part 1: Specifications for pipes, fittings and the system.)
NF T54-019-1995 塑料管道和导管系统.未增塑聚氯乙烯(PVC-U)管和配件.粘度值的测定和K值的计算的样品制备 (PLASTICS PIPING AND DUCTING SYSTEMS. PIPES AND FITTINGS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U). SPECIMEN PREPARATION FOR DETERMINATION OF THE VISCOSITY NUMBER AND CALCULATION OF THE K-VALUE. (EUROPEAN STANDARD EN 922).)
NF T54-024-1994 塑料管道系统.热塑塑料管和配件.维卡软化点的测定 (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES AND FITTINGS. DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST). (EUROPEAN STANDARD EN 727).)
NF T54-025-1995 塑料管道系统.热塑塑料管.恒定低温度下耐内压性能的测定 (Plastics piping systems. Thermoplastics pipes. Determination of resistance to internal pressure at constant temperature.)
NF T54-036-1994 塑料管道和导管系统.注模热塑配件.热效应目视评定的试验方法 (Plastics piping and ducting systems. Injection-moulded thermoplastics fitting. Test method for visually assessing effects of heating.)
NF T54-037-1981 塑料.未增塑聚氯乙烯管道元件.生活污水无压排放设备用密封圈接头.使 用特性 (Plastics. Un-plasticized PVC parts dor piping. Simple assemblies with sealing rings for domestic water drainage piping. End use test. Specification.)
NF T54-041-1994 塑料管道系统.压力管道用弹性密封圈型接头的热注塑料配件.耐无轴向力短暂内压力性能的试验方法 (Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust.)
NF T54-042-1994 塑料管道系统.压力管道用溶剂-水泥胶合接头的注模承窝配件 (Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure.)
NF T54-045-1994 塑料管道和导管系统.压力管道系统用热注塑料配件.最大变形的挤撞试验法 (Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing.)
NF T54-051-1979 聚乙烯管道.机械接头的载荷减小.试验方法与规 (Polyethylene pipes. Pressure drop in mechanical pipe-jointing systems. Method of test and requirements.)
NF T54-052-2001 人类饮用水输送用塑料管道系统.迁移评定.塑料管和配件及其接头迁移值的测定 (Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints.)
NF T54-054-1997 塑料管道系统.未增塑聚氯乙烯端点负载轴承双插座连接件.当弯曲和受到内压时测定其防漏性和强度的试验方法 (Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure.)
NF T54-059-1995 压力管道和配件用热塑性塑料.分类和名称与符号.总体设备的设计系数 (Thermoplastics materials for pipes and fittings for pressure applications. Classification and designation. Overall service (design) coefficient.)
NF T54-062-1-1999 建筑物内污物和污水排放(低、高温)用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统规范 (Plastics piping systems for soils and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.)
NF T54-063-1-2003 供水用塑料管道系统.聚乙烯.第1部分:总则 (Plastics piping systems for water supply - Polyethylene (PE) - Part 1 : general.)
NF T54-063-2-2003 供水用塑料管道系统.聚乙烯.第2部分:管道 (Plastics piping systems for water supply - Polyethylene (PE) - Part 2 : pipes.)
NF T54-063-3-2003 供水用塑料管道系统.聚乙烯.第3部分:配件 (Plastics piping systems for water supply - Polyethylene (PE) - Part 3 : fittings.)
NF T54-063-4-2003 供水用塑料管道系统.聚乙烯(PE).第4部分:阀 (Plastics piping systems for water supply - Polyethylene (PE) - Part 4 : valves.)
NF T54-063-5-2003 供水用塑料管道系统.聚乙烯.第5部分:系统适用性 (Plastics piping systems for water supply - Polyethylene (PE) - Part 5 : fitness for purpose of the system.)
NF T54-065-1-2003 气体燃料的塑料管道供应系统.聚乙烯(PE).第1部分:总则 (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1 : general.)
NF T54-065-2-2003 气体燃料的塑料管道供应系统.聚乙烯(PE).第2部分:管道 (Plastics piping systems for the supply of gaseous fuels - Polythylene (PE) - Part 2 : pipes.)
NF T54-065-3-2003 气体燃料的塑料管道供应系统.聚乙烯(PE).第3部分:配件 (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3 : fittings.)
NF T54-065-4-2003 气体燃料的塑料管道供应系统.聚乙烯(PE).第4部分:阀门 (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4 : valves.)
NF T54-065-5-2003 气体燃料的塑料管道供应系统.聚乙烯(PE).第5部分:系统的配合 (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5 : fitness for purpose of the system.)
NF T54-075-1997 塑料管和管道系统.聚烯烃管和配件.氧化时间的测定(欧洲标准EN 728) (Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time.)
NF T54-076-1992 塑料.聚乙烯塑料管道系统.标称外径125以上导管的耐缓慢龟裂性.试验方法 (Plastics. Polyethylene (pe) plastics piping systems. Resistance to slow cracking of pipes with a nominal external diameter over 125. Test method.)
NF T54-077-1992 塑料.聚乙烯塑料管道系统.标称外径125及其以下导管的耐缓慢龟裂性.试验方法 (Plastic. Polyethylene (pe) plastics piping systems. Resistance to slow cracking of pipes with a nominal external diameter up to 125. Test method.)
NF T54-078-1992 塑料.塑料管道系统用聚乙烯.极限应力强度因数的测定.试验方法 (Plastics. Polyethylene (pe) for plastics piping systems. Determination of the limiting stress intensity factor. Test method.)
NF T54-087-1993 塑料管道系统.交联聚乙烯(PE-X)管.溶剂萃取法测定交联度 (PLASTICS PIPING SYSTEMS. CROSSLINKED POLYETHYLENE (PE-X) PIPES. DETERMINATION OF DEGREE OF CROSSLINKING BY SOLVENT EXTRACTION. (EUROPEAN STANDARD EN 579).)
NF T54-097-1995 塑料管道系统.热塑管.耐连续吹风的试验方法 (Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the-clock method.)
NF T54-100-1997 塑料管道系统.热塑阀门.外部送风后阀门完好性的测试方法 (Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after an external blow.)
NF T54-300-1-2003 普通用水、排水、污水地上和地下压力系统用塑料管道系统.聚乙烯(PE).第1部分:总则 (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1 : general.)
NF T54-300-2-2003 普通用水、排水、污水地上和地下压力系统用塑料管道系统.聚乙烯(PE).第2部分:管道 (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2 : pipes.)
NF T54-300-3-2003 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第3部分:管件 (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3 : fittings.)
NF T54-300-4-2003 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第4部分:阀门 (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4 : valves.)
NF T54-300-5-2003 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第5部分:系统的适用性 (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5 : fitness for purpose of the system.)
NF T54-900-2003 塑料管道和导管系统.用外推法测定热塑性塑料管道的长期静液压强度 (Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation.)
NF T54-901-1995 塑料管道系统.非压力设备用热塑管道系统.不透水性试验方法(欧洲标准EN 1053) (Plastics piping systems. Thermoplastics piping systems for non-pressure applications. Test method for watertightness.)
NF T54-902-1995 塑料管道系统.土壤和废料排出用热塑管道系统.粘接处密封度试验方法 (Plastics piping systems. Thermoplastics piping systems for soil and waste discharge. Test method for airtightness of joints.)
NF T54-903-1996 塑料管道系统.建筑物内排水管用热塑制管道系统.可载温度负荷的检验方法 (Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for resistance to elevated temperature cycling.)
NF T54-904-1996 塑料管线和管道系统.塑料管和配件.暴露在直接(自然)风化的方法 (PLASTICS PIPING AND DUCTING SYSTEMS. PLASTICS PIPES AND FITTINGS. METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING. (EUROPEAN STANDARD EN 1056).)
NF T54-905-2002 塑料管道系统.热塑性压力管用端部承载或非端部承载组件和接头.内部水压下长期无漏损的试验方法 (Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure.)
NF T54-906-1996 塑料管道系统.埋置非压管道设备用热塑管道系统.弹性密封环型接头耐泄漏性试验方法 (Plastics piping systems. Thermoplastics piping systems for buried non-pressure applications. Test methods for leaktightness of elastomeric sealing ring type joints.)
NF T54-911-1995 热塑管道.潜伸率的测定 (THERMOPLASTICS PIPES. DETERMINATION OF CREEP RATIO. (EUROPEAN STANDARD EN ISO 9967).)
NF T54-912-1995 热塑.管道.环硬性的测量 (THERMOPLASTICS. PIPES. DETERMINATION OF RING STIFFNESS. (EUROPEAN STANDARD EN ISO 9969).)
NF T54-913-1996 塑料管道及保护管系统.热塑管.环形挠形测定 (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES. DETERMINATION OF RING FLEXIBILITY. (EUROPEAN STANDARD EN 1446).)
NF T54-914-1-2000 建筑物内污物和污水排放(低、高温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道,配件和系统规 (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1 : requirements for pipes, fittings and th)
NF T54-915-1-2000 建筑物内土和废物排放(高温和低温)用结构壁管的塑料管道系统.未增塑聚氯乙烯管(PVC-U).第1部分:管道和系统 (Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for p)
NF T54-917-1-2000 建筑物内污物和污水排放(低、高温)用塑料管道系统.聚乙烯(PE).第1部分:管道,配件和系统规范 (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1 : specifications for pipes, fittings and the system.)
NF T54-918-1-1999 建筑物内污物和污水排放(低、高温)用塑料管道系统.苯乙烯共聚物混合物(SAN+PVC).第1部分:管道,配件和系统规 (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN + PVC) - Part 1 : specifications for pipes, fittings and the system.)
NF T54-919-1-1999 建筑物内污物和污水排放(低、高温)用塑料管道系统.氯化聚氯乙烯(PVC-C).第1部分:管道,配件和系统规范 (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 : specifications for pipes, fittings and the system.)
NF T54-920-1997 塑料管道系统.聚乙烯管道系统用阀门.在工作机构弯头处和弯头之后的防漏试验方法(欧洲标准EN 1680) (Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism.)
NF T54-921-1997 塑料管道系统.热塑阀门.弯曲下温度周期变化后阀门完好性的测试方法 (Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending.)
NF T54-922-1997 塑料管道系统.聚乙烯放液T形管.组装放液T形管耐冲击的试验方法(欧洲标准EN 1716) (Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee.)
NF T54-923-2000 塑料管道系统.与未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯弹性密封环式套筒接头.负压下密封试验法 (Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure.)
NF T54-924-1999 塑料管道系统.未增塑聚(氯乙烯)(PVC-U)配件和材料.依据总氯含量的PVC含量的估计方法(EN 1905) (Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content.)
NF T54-925-1999 塑料管道系统.热塑螺旋成型承重管道.接缝处抗拉强度的测定 (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS SPIRALLY-FORMED STRUCTURED-WALL PIPES. DETERMINATION OF THE TENSILE STRENGTH OF A SEAM. (EUROPEAN STANDARD EN 1979).)
NF T54-926-2000 热塑性管道系统.地下常压排污设施用接头.用密封压力评定法测定带热塑性弹性体(TPE)密封件接头的长期密封性 (Thermoplastics piping systems - Joints for buried non-pressure sewage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the)
NF T54-927-1999 塑料管道系统.热塑配件.冲击强度的试验方法(EN 12061) (PLASTICS PIPING SYSTEMS. THERMOPLASTICS FITTINGS. TEST METHOD FOR IMPACT STRENGTH. (EUROPEAN STANDARD EN 12061).)
NF T54-928-1997 塑料管道系统.雨水排放管道系统用托架.托架强度的测试方法 12095) (Plastics piping system. Brackets for rainwater piping systems. Test method for bracket strength.)
NF T54-929-1997 塑料管道系统:聚乙烯管用材料和元件.挥发物含量测定 (Plastics piping systems. Polyethylene piping materials and components. Determination of volatile content.)
NF T54-930-1997 塑料管道系统.聚乙烯(PE)阀.支架间耐弯曲试验方法 (Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports.)
NF T54-931-1997 塑料管道系统.聚乙烯(PE)管.挤出后耐内压试验方法 (PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) PIPES. TEST METHOD FOR THE RESISTANCE TO INTERNAL PRESSURE AFTER APPLICATION OF SQUEEZE-OFF. (EUROPEAN STANDARD EN 12106).)
NF T54-932-1997 塑料管道系统.注模热塑配件配件、阀和附属设备.管道元件注模用热塑材料长期液压强度的测定 (Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components.)
NF T54-934-1997 塑料管道系统.管件,阀和附件.气流率/压降关系的测定 (Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships.)
NF T54-935-1997 塑料管道系统.比色法测定热塑材料的含水量 (Plastics piping systems. Determination of moisture content in thermoplastics by coulometry.)
NF T54-936-1997 塑料管道系统.聚乙烯(PE)阀.耐热循环试验方法(欧洲标准EN 12119) (Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to thermal cycling.)
NF T54-937-2000 塑料管道系统.与未增塑聚氯乙烯管一起使用的弹性密封环式套筒接头.内压下角度偏转密封试验法 (Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with ang)
NF T54-939-1998 塑料管道系统.热塑塑料配件.组装配件的机械拉伸强度或柔韧性的试验方法 (Plastics piping systems. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings.)
NF T54-940-1999 塑料管道系统.冷热水输送用热塑性管和配件.安装组件耐温度循环的试验方法 (PLASTICS PIPING SYSTEMS. THERMOPLASTICS PIPES AND FITTINGS FOR HOT AND COLD WATER. TEST METHOD FOR THE RESISTANCE OF MOUNTED ASSEMBLIES TO TEMPETARURE CYCLING. (EUROPEAN STANDARD EN 12293).)
NF T54-941-1999 塑料管道系统.热水和冷水系统.真空密封性的检验方法 (Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum.)
NF T54-942-1999 塑料管道系统.输送热水和冷水用的热塑管和附属配件.连接件对压力变化负载的稳定性的检测方法 (Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling.)
NF T54-946-2003 工业用塑料管道系统.聚丁烯(PE)、聚乙烯(PE)和聚丙烯(PP).元件和系统规范.米制系列 (Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series.)
NF T54-949-2003 翻新用塑料管道系统的分类和设计指南 (Guidance on the classification and design of plastics piping systems used for renovation.)
NF T54-956-2003 塑料管道系统.塑料管道和配件.暴露于自然风化下的方法 (Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (naturel) weathering.)
NF T54-965-2003 气态燃料供应用塑料管道系统.聚乙烯(PE).管的包装、存储、搬运和运输用规范 (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Specifications for the packaging, the storage, the handling and the transportation of the pipes.)
NF T57-204-1996 塑料管道系统.玻璃增强热固性塑料(GRP)管.耐长期内部压力性能的测定 (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of long-term resistance to internal pressure.)
NF T57-210-1994 塑料管道系统.玻璃纤维增强塑料部件.用重力法测定组分用量 (Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method.)
NF T57-211-1994 塑料管道系统.玻璃增强热固性塑料管和配件.回归分析及其使用方法 (Plastics piping sytems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Methods for regression analysis and their use.)
NF T57-212-1994 塑料管道系统.玻璃增强热固性管子.干燥条件蠕变系数的测定 (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor dry conditions.)
NF T57-214-1-1998 地下排水系统和压力下污水排放的塑料管道系统.基于不饱和聚酯 树脂(UP)的玻璃增强热固塑料.第1部分:一般性( (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 1 : general.)
NF T57-214-3-1996 压力下地下排水系统用塑料管道系统.不饱和聚酯树脂基玻璃增强热固塑料.第3部分:配件 (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsaturated polyester resin (up). Part 3 : fittings.)
NF T57-214-5-1996 压力下地下排水系统用塑料管道系统.不饱和聚酯树脂基玻璃增强热固塑料.第5部分:接头的适用性 (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsatured polyester resin (up). Part 5: fitness for purpose of the joints.)
NF T57-215-1996 塑料管道系统.玻璃增强热固性塑料管和配件接头.挠性和铰链接头耐泄漏和损伤试验方法 (Plastics piping systems. Joints for glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints.)
NF T57-216-1996 塑料管道系统.玻璃增强热固塑料管和配件.挠曲条件下部件内部耐化学侵蚀性的测定 (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Determination of the resistance to chemical attack from the inside of a section in a deflected condition.)
NF T57-217-1996 塑料管道系统.玻璃纤维增强热固性塑料管.潮湿条件下蠕变因子的测定和长期指定环的硬度的计算 (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness.)
NF T57-218-1996 塑料管道系统.玻璃纤维增强热固塑料(GFK).检验原有环挠曲的试验方法 (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Test method to prove the resistance to initial ring deflection.)
NF T57-219-1999 塑料管道系统. 玻璃增强的热固塑料管(GRP).在潮湿条件下长临界相关环变形的测定(EN 1227) (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate relative ring deflection under wet conditions.)
NF T57-220-1996 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管.测定指定环初始硬度 (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial specific ring stiffness.)
NF T57-221-1996 塑料管道系统.玻璃纤维增强热固塑料管和配件.短期内部压力下管壁密封性的检验的试验方法 (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods to prove the leaktightness of the wall under short-term internal pressure.)
NF T57-222-1996 塑料管道系统.玻璃纤维增强热固塑料管.初始纵向拉伸性能的测定 (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial longitudinal tensile properties.)
NF T57-223-1996 塑料管道系统.玻璃增强热固性塑料(GRP)管.初期表面抗拉强度的测定 (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination O the apparent initial circumferential tensile strength.)
NF T57-224-1997 塑料管道系统.玻璃纤维增强热固性塑料(GRP)构件.检验带有弹性密封件的刚性锁定的管套筒接头设计的试验方法 (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals.)
NF T57-225-1997 塑料管道系统.玻璃纤维增强热固性塑料元件.验证胶合管套筒接头设计的测试方法 (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of cemented socket-and-spigot joints.)
NF T57-226-1996 塑料管道系统.玻璃增强热固性塑料元部件.栓结法兰联轴节的设计验证试验方法 (Plastics piping systems. Glas-reinforced thermosetting plastics (grp) components. Test methods to prove the design of bolted flange joints.)
NF T57-227-1997 塑料管道系统.玻璃增强热固性塑料(GRP)管.周期性内部压力影响的试验方法 (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure.)
NF T57-229-1997 塑料管道系统.玻璃纤维增强热固性塑料管.在化学环境下存放后相对弯曲蠕变系数的测定 (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment.)
NF T76-320-2003 热塑性管道系统用胶粘剂.胶粘剂热稳定性测定的试验方法 (Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives.)
NF X08-101-1978 管道通用颜色.管道通用颜色的几种基本颜料一览表 (CONVENTIONAL COLOURS FOR PIPING. TABLE OF BASIC PIGMENTS FOR USE IN THE PRODUCTION OF CONVENTIONAL COLOURS FOR PIPING.)
NF X08-104-1987 颜色.钢铁工厂.管道系统的标记 (Colours. Iron and stellfactories. Marking of fluids in pipes.)
NF X08-105-1986 颜色.化学工厂.管道系统的标记 (Colours. Chemical factories. Marking of fluids in pipes.)
NF X10-100-1993 封闭管道中流体流量的测量.词汇和符号 (Measurement of fluid flow in closed conduits. Vocabulary and symbols.)
NF X10-102-1-2003 用插入圆截面满载管道中的压差装置测量流体流量.第1部分:一般原理和要求 (Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1 : general principles and requirements.)
NF X10-102-2-2003 用插入圆截面管道中的压差装置测量流体流量.第2部分:节流孔板 (Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2 : orifice plates.)
NF X10-102-3-2003 用插入圆截面管道中的压差装置测量流体流量.第3部分:喷嘴和文杜利喷嘴 (Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3 : nozzles and Venturi nozzles.)
NF X10-102-4-2003 用插入圆截面管道中的压差装置测量流体流量.第4部分:文杜利管 (Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4 : Venturi tubes.)
NF X10-112-1977 密封管道中液体流量的测定.均匀流量速度场的双皮托管测量法 (MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITES.VELOCITY AREA METHOD USING PITOT STATIC TUBES.)
NF X10-113-1982 圆截面密封管道中液体流量的测定.剖面上一点流速的测定方法 (DETERMINATION OF FLOWRATE OF FLUIDS IN CLOSED CONDUITS OF CIRCULAR CROSS-SECTION. METHOD OF VELOCITY MEASUREMENT AT ONE POINT OF THE CROSS-SECTION.)
NF X10-121-1993 封闭管道中流体流量的测量.液体电磁流量计的性能评定法 (Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids.)
NF X10-131-1974 密封管道中水流量的测定.示踪法.第1部分:综合 (MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS.TRACER METHODS PART I:GENERAL)
NF X10-132-1975 密封管道中水流量的测定.示踪法.第2部分:使用非放射性示踪物的恒流量喷射法 (MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS. TRACER METHODS PART II : CONSTANT RATE INJECTION METHOD USING NON-RADIOACTIVE TRACERS)
NF X10-133-1977 密封管道中水流量的测定.示踪法.第3部分:放射性示踪物恒流量喷射法 (MEASUREMENT OF WATER FLOW RATE IN CLOSED CONDUITS. TRACER METHODS. PART III: CONSTANT RATE INJECTION METHOD USING RADIOACTIVE TRACERS.)
NF X10-136-1977 密封管道中水流量的测定.示踪法.第6部分:非放射性示踪物的过渡时间法 (MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS. TRACER METHODS-PAR VI:TRANSIT TIME METHOD USING NON-RADIOACTIVE TRACERS.)
NF X10-137-1977 密封管道中水流量的测定.示踪法.第7部分:放射性示踪物的过渡时间法 (MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS. TRACER METHODS. PART VII:TRANSIT TIME METHOD USING RADIOACTIVE TRACERS.)
NF X10-141-1982 密封管道中气体流量的测定.示踪法.第1部分:综合 (Measurement of gas flow in conduits. Tracer methods. Part 1 general.)
NF X10-144-1982 密封管道中气体流量的测定.示踪法.第4部分:放射性示踪物的过渡时间法 (MEASUREMENT OF GAS FLOW IN CONDUITS. TRACER METHODS. PART 4 : TRANSIT TIME METHOD USING RADIOACTIVE TRACERS.)
NF X10-145-1991 称重法测量封闭管道里的流体流量.测量装置的检验.第1部分:静态装置 (MEASUREMENT OF LIQUID FLOW IN CLOSED CONDUITS BY THE WEIGHING METHOD. PROCEDURES FOR CHECKING INSTALLATIONS. PART 1 : STATIC WEIGHING SYSTEM.)
NF X42-119-2001 生物技术.管道和仪表的性能标准.第1部分:一般性能标准 (Biotechnology - Performance criteria for piping and instrumentation - Part 1 : general performance criteria.)
NF X42-125-2001 生物技术.管道和仪表的性能标准.第2部分:耦合 (Biotechnology - Performance criteria for piping and instrumentation - Part 2 : couplings.)
NF X42-127-2001 生物技术.管道和仪表的性能标准.第3部分:取样和接种装置 (Biotechnology - Performance criteria for piping and instrumentation - Part 3 : sampling and inoculation devices.)
NF X42-128-2001 生物技术.管道和仪表的性能标准.第4部分:管和管道 (Biotechnology - Performance criteria for piping and instrumentation - Part 4 : tubes and pipes.)
NF X42-129-2001 生物技术.管道和仪表的性能标准.第5部分:阀门 (Biotechnology - Performance criteria for piping and instrumentation - Part 5 : valves.)
NF X42-132-2001 生物技术.管道和仪表的性能标准.第6部分:设备探头 (Biotechnology - Performance criteria for piping and instrumentation - Part 6 : equipment probes.)
NF X43-285-1997 工作场地的大气环境.短期探测器管道测量系统.要求和测试方法 (WORKPLACE ATMOSPHERES. SHORT TERM DETECTOR TUBE MEASUREMENT SYSTEMS. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1231).)
NF X50-001-7-1-2000 动力站设备和系统的征购指南.第7部分:管道和阀门.第1节:高压管道系统 (Guide for procurement of power station plant, equipement and systems - Part 7 : pipework and valves - Section 1 : high pressure piping systems.)
NF X50-001-7-2-2000 动力站设备和系统的征购指南.第7部分:管道和阀门.第2节:锅炉和高压管道阀门 (Guide for procurement of power station plant, equipment and systems - Part 7 : pipework and valves - Section 2 : boiler and high pressure piping valves.)
XP T54-034-1999 塑料.在液态食物,热水,工业用液体压力下传输用未增塑聚(氯乙烯)(PVC-U)管道.增压液体用减速规则的制定和规 (Plastics - Unplasticized poly(vinyl chloride) (PVC-U) piping for conveyance under pressure of liquid foodstuffs, thermal water and industrial liquids - Specifications and setting of the derating rules for pressurized liquids.)
编号中文名称英文名称

返回