| 编号 | 中文名称 | 英文名称 |
|---|
| BS 3828-1973
| 石英玻璃规范
| Specification for crystal glass
|
| BS 6711-1-1986
| 主要由玻璃、瓷料或透明石英制作的实验室器皿相关词汇.第1部分:器皿项目名称
| Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silica - Names for items of apparatus
|
| BS 9612 N004-1977
| 振荡器用冷焊密封石英晶体振子详细规范.DN、47 U/2、DQ和DP外壳、0.8至20MHz和3.0到30MHz频率范围.宽温范围
| Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, 47 U/2, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
|
| BS 9612 N005-1977
| 振荡器用冷焊密封石英晶体振子详细规范.DN、DQ和DP外壳、0.8至20MHz和3.0到30MHz频率范围.窄温范围(非温控)
| Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode , AT-cut, for operation over narrow temperature ranges (temperature controlled) - Full assessment level
|
| BS 9612 N006-1977
| 振荡器用冷焊密封石英晶体振子详细规范.DN、47U/2、DQ和DP外壳、17至75MHz频率范围.宽温范围(非温控)操作的
| Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, 47 U/2, DQ and DP enclosures, 17 to 75 MHz frequency range - Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
|
| BS 9612 N008-1977
| 振荡器用冷焊密封石英晶体振子详细规范.DN、DQ和DP外壳、50至125MHz频率规范.宽温范围(非温控)操作用第五谐
| Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, DQ and DP enclosures, 50 to 125 MHz frequency range - Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
|
| BS 9612 N009-1977
| 经质量评定的振荡器用冷焊封石英晶体振子详细规范.DN、DQ和DP外壳,50至125MHz频率规范.窄温范围(非温控)操
| Detail specification for cold welded seal quartz crystal units for oscillator applications - DN, DQ and DP enclosures, 50 to 125 MHz frequency range - Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled) - Full assessment level
|
| BS 9612 N010-1979
| 振荡器用冷焊密封石英晶体振子详细规范.DP外壳、6.0至25MHz频率范围.宽温范围(非温控)操作的基波厚度剪切模
| Detail specification for cold welded seal quartz crystal units for oscillator applications - DK enclosure, 6.0 to 25 MHz frequency range - Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
|
| BS 9612 N016-1979
| 振荡器用冷焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、0.8至20MHz和3.0到30MHz频率范围.宽温范围(非
| Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
|
| BS 9612 N017-1979
| 振荡器用冷焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、0.8至20MHz和3.0到30MHz频率范围.窄温范围(非
| Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges - Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled) - Full assessment level
|
| BS 9612 N018-1979
| 振荡器用电阻焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、17至75MHz频率范围.宽温范围(非温控)操作的
| Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range - Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
|
| BS 9612 N019-1979
| 振荡器用冷焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、17至75MHz频率范围.窄温范围(非温控)操作的第
| Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range - Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled) - Full assessment level
|
| BS 9612 N020-1979
| 振荡器用冷焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、17至75MHz频率范围.宽温范围(非温控)操作的第
| Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range - Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled) - Full assessment level
|
| BS 9612 N021-1979
| 振荡器用冷焊密封石英晶体振子详细规范.DN、D2、DQ和DP外壳、50至125MHz频率范围.窄温范围(温控)操作的第五
| Detail specification for resistance welded seal quartz crystal units for oscillator applications - DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range - Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled) - Full assessment level
|
| BS 9617-1982
| 经质量评估的石英晶体振子详细规范的制定规则.全面评估级
| Rules for the preparation of detail specifications for quartz crystal units of assessed quality - Full assessment level
|
| BS 9625-1983
| 经质量评定的石英晶体振荡器空白详细规范.全面评定级
| Blank detail specification for quartz crystal oscillators of assessed quality: full assessment level
|
| BS EN 12904-2005
| 人类生活用水处理用制品.石英砂和石英砾石
| Products used for treatment of water intended for human consumption - Silica sand and silica gravel
|
| BS EN 168100-1995
| 电子元器件质量评定协调体系.石英晶体器件的分规范.(性能验收)
| Harmonized system of quality assessment for electronic components - Sectional specification: quartz crystal units (capability approval)
|
| BS EN 168101-1990
| 电子元器件质量保证协调体系.空白详细规范.石英晶体部件(性能认可)
| Harmonized system of quality assessment for electronic components - Blank detail specification: quartz crystal units (capability approval)
|
| BS EN 168200-1991
| 电子元器件质量评定协调系统.分规范:石英晶体部件(合格鉴定批准)
| Harmonized system of quality assessment for electronic components - Sectional specification: quartz crystal units (qualification approval)
|
| BS EN 168201-1996
| 电子元器件的质量评估协调体系.空白详细规范.石英晶体元件(资格认可)
| Harmonized system of quality assessment for electronic components - Blank detail specification - Quartz crystal units - (Qualification approval)
|
| BS EN 60122-1-2003
| 经质量评定的石英晶体元件.总规范
| Quartz crystal units of assessed quality - Generic specification
|
| BS EN 60122-3-2002
| 质量评定的石英晶体元件.标准外形和引线连接器
| Quartz crystal units of assessed quality - Standard outlines and lead connections
|
| BS EN 60444-1-1997
| 石英晶体单元参数的测量.第1部分:用π型网络零相位技术测量石英晶体单元谐振频率和谐振电阻的基本方法
| Measurement of quartz crystal unit parameters - Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a -network
|
| BS EN 60444-2-1993
| 石英晶体元件参数的测定.第2部分:用相位偏离法测量石英晶体单元的动态电容
| Measurement of quartz crystal unit parameters - Phase offset method for measurement of motional capacitance of quartz crystal units
|
| BS EN 60444-3-1993
| 石英晶体器件参数的测定.第3部分:用与并联电容量Co补偿相连的π网络相位技术测量200MHz以下的石英器件的两
| Measurement of quartz crystal unit parameters - Basic method for the measurement of two-terminal parameters of quartz crystal units up to 200 MHz by phase technique in a -network with compensation of the parallel capacitance C0
|
| BS EN 60444-4-1993
| 石英晶体元件参数测量.第4部分:30MHz以下石英晶体元件负荷谐振频率fL.负荷谐振电阻R1测量方法,以及石英晶体
| Measurement of quartz crystal unit parameters - Method for the measurement of the load resonance frequency fL, load resonance resistance RL and the calculation of other derived values of quartz crystal units, up to 30 MHz
|
| BS EN 60444-5-1995
| 石英晶体元件参数测量.第5部分:用自动网络分析仪和误差修正技术测定等效电气参数
| Measurement of quartz crystal unit parameters - Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
|
| BS EN 60444-6-1995
| 石英晶体元件参数测量.驱动级相关性测量
| Measurement of quartz crystal unit parameters - Measurement of drive level dependence (DLD)
|
| BS EN 60444-7-2004
| 石英晶体元件参数的测量.石英晶体元件的活性和频率下降的测量
| Measurement of quartz crystal unit parameters - Measurement of activity and frequency dips of quartz crystal units
|
| BS EN 60444-8-2003
| 石英晶体元件参数的测量.表面安装石英晶体元件用试验装置
| Measurement of quartz crystal unit parameters - Test fixture for surface mounted quartz crystal units
|
| BS EN 60444-9-2007
| 石英晶体元件参数测量.压电晶体元件寄生振荡测量
| Measurement of quartz crystal unit parameters - Measurement of spurious resonances of piezoelectric crystal units
|
| BS EN 60455-3-2-2003
| 电气绝缘用树脂基反应性复合物.单项材料规范.填石英的环氧树脂复合物.第2活页:填石英的环氧树脂复合物
| Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Quartz filled epoxy resinous compounds - Sheet 2: Quartz filled epoxy resinous compounds
|
| BS EN 60679-1-2007
| 经质量评定的石英晶体控制振荡器.总规范
| Quartz crystal controlled oscillators of assessed quality - Generic specification
|
| BS EN 60679-3-2002
| 经质量评定的石英晶体控制振荡器.标准外形和引线连接
| Quartz crystal controlled oscillators of assessed quality - Standard outlines and lead connections
|
| BS EN 60679-4-1-1998
| 经质量评估的石英晶体受控振荡器.空白详细规范.能力认可
| Quartz crystal controlled oscillators of assessed quality - Blank detail specification - Capability approval
|
| BS EN 60679-4-1998
| 经质量评定的石英晶体受控振荡器.分规范.能力认可
| Quartz crystal controlled oscillators of assessed quality - Sectional specification - Capability approval
|
| BS EN 60679-5-1-1998
| 经质量评估的石英晶体受控振荡器.空白详细规范.合格鉴定
| Quartz crystal controlled oscillators of assessed quality - Blank detail specification - Qualification approval
|
| BS EN 60679-5-1998
| 经质量评估的石英晶体受控振荡器.分规范.合格鉴定
| Quartz crystal controlled oscillators of assessed quality - Sectional specification - Qualification approval
|
| BS EN 60682-1994
| 石英卤钨灯灯夹温度测量方法
| Method for measuring the pinch temperature of quartz-tungsten-halogen lamps
|
| BS EN 60758-2005
| 人造石英晶体.规范和使用指南
| Synthetic quartz crystal - Specifications and guide to the use
|
| BS EN ISO 10650-1-2005
| 牙科学.动力聚合活化剂.石英钨卤素灯
| Dentistry - Powered polymerization activators - Quartz tungsten halogen lamps
|
| BS EN ISO 3262-13-1998
| 涂料填充剂.规范和试验方法.天然石英(地)
| Extenders for paints - Specifications and methods of test - Natural quartz (ground)
|
| BS EN ISO 3262-15-2000
| 涂料填充剂.规范和试验方法.透明石英
| Extenders for paints - Specifications and methods of test - Vitreous silica
|
| BS EN ISO 3262-19-2000
| 涂料填充剂.规范和试验方法.沉淀石英砂
| Extenders for paints - Specifications and methods of test - Precipitated silica
|
| BS EN ISO 3262-20-2000
| 涂料填充剂.规范和试验方法.烟化石英砂
| Extenders for paints - Specifications and methods of test - Fumed silica
|
| BS EN ISO 3262-21-2000
| 涂料填充剂.规范和试验方法.石英砂(未磨碎天然石英)
| Extenders for paints - Specifications and methods of test - Silica sand (unground natural quartz)
|
| BS ISO 10553-2003
| 钟表学.石英表准确度评价规程
| Horology - Procedure for evaluating the accuracy of quartz watches
|
| 编号 | 中文名称 | 英文名称 |
|---|