| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI A10.33-1992 | 建筑施工和拆除工程.安全和卫生大纲.多雇员参与的工程项目的要求 | Safety and Health Program Requirements for Multi-Employer Projects |
| ANSI A10.39-1996 | 施工安全和卫生审计计划 | Construction Safety and Health Audit Program |
| ANSI Z21.61-1983 | 燃气的卫生间 | Toilets, Gas-Fired |
| ANSI Z4.1-1986 | 工作场所环境卫生的最低要求 | Sanitation - In Places of Employment - Minimum Requirements |
| ANSI Z4.3-1995 | 公共卫生设施.非下水道排污的废水处理系统.最低要求 | Sanitation - Nonsewered Waste-Disposal Systems - Minimum Requirements |
| ANSI Z4.4-1988 | 野外和临时工露营地环境卫生的最低要求 | Sanitation - In Fields and Temporary Labor Camps - Minimum Requirements |
| ANSI/3-A P3-A 002-2008 | 用于加工设备和系统材料的药物3-Ar卫生标准 | Pharmaceutical 3-A? Sanitary/Hygienic Standards for Materials for Use in Process Equipment and Systems |
| ANSI/AAMI ST24-1999 | 卫生保健机构用一般用途的环氧乙烷自动灭菌器和环氧乙烷无菌源 | Automatic, General-Purpose Ethylene Oxide Sterilizers and Ethylene Oxide Sterilant Sources Intended for Use in Health Care Facilities |
| ANSI/AAMI ST41-2008 | 卫生保健设施中的环氧乙烷灭菌:安全和效能 | Ethylene oxide sterilization in health care facilities: Safety and effectiveness |
| ANSI/AAMI ST65-2008 | 用于卫生保健设施中可重复使用的外科纺织物的处理 | Processing of reusable surgical textiles for use in health care facilities |
| ANSI/AAMI/ISO 11135-1-2007 | 卫生保健品灭菌.环氧乙烷.第1部分:医疗设备灭菌过程开发、确认和常规控制的要求 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ANSI/AAMI/ISO 11140-3-2007 | 卫生保健品灭菌.化学指示剂.第3部分:布维-狄(Bowie和Dick)型蒸汽渗透试验用2级指示剂系统 | Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicators systems for use in the Bowie and Dick steam penetration test |
| ANSI/AAMI/ISO 11140-4-2007 | 卫生保健品灭菌.化学指示剂.第4部分:蒸汽渗透检测布维-狄(Bowie和Dick)型试验可选2级指示剂 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to Bowie and Dick test for detection of steam penetration |
| ANSI/AAMI/ISO 11140-5-2007 | 卫生保健品灭菌.化学指示剂.第5部分:布维-狄(Bowie和Dick)型排气试验纸和试验包用2级指示剂 | Sterilization of health care products - Chemical indicators - Part 5: Class 2 indicators for Bowie and Dick air removal test sheets and packs |
| ANSI/AAMI/ISO 13408-3-2006 | 卫生保健产品的无菌工艺.第3部分:冻干法 | Aseptic Processing of health care products - Part 3: Lyophilization |
| ANSI/AAMI/ISO 15882-2008 | 卫生保健产品的消毒.化学指示剂.结果的选择、使用和说明用指南 | Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results |
| ANSI/AIHA Z10-2005 | 职业卫生和安全管理系统 | Occupational Health and Safety Management Systems |
| ANSI/ASHRAE 170-2008 | 卫生保健设备用通风 | Ventilation of Health Care Facilities |
| ANSI/ASME A112.1.3-2000 | 卫生设备、器具和附件的空隙配套件 | Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances |
| ANSI/ASME A112.18.1-2007 | 卫生管道配件 | Plumbing Fixture Fittings |
| ANSI/ASME A112.18.1-2007/CSA B125.1-2007 | 卫生管道配件 | Plumbing Fixture Fittings |
| ANSI/ASME A112.18.2-2008 | 卫生设备用污水管配件 | Plumbing Waste Fittings |
| ANSI/ASME A112.3.1-2007 | 地上和地下卫生排水、排污及放气(DWV)、雨水和真空设备用不锈钢排水系统 | Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above and Below-Ground |
| ANSI/ASME A112.4.14-2004 | 卫生管道系统中使用的手动直角转弯截止阀 | Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems |
| ANSI/ASME A112.4.2-2003 | 抽水马桶个人卫生设备 | Water Closet Personal Hygiene Devices |
| ANSI/ASME A112.6.7-2001 | 瓷漆和环氧涂覆的铸铁和PVC塑料卫生底板污水池 | Enameled and Epoxy Coated Cast Iron and PVC Plastic Sanitary Floor Sinks |
| ANSI/ASTM D5926-2004 | 水、废水和排气(DWV)、下水道、卫生设施和暴雨管道系统用聚氯乙烯垫圈的规范 | Specification for Poly(Vinyl Chloride) (PVC) Gaskets for Drain, Waste and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems |
| ANSI/ASTM D6548-2005 | 薄棉卫生纸抗机械穿透性的试验方法(球爆裂过程) | Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure) |
| ANSI/ASTM E2148-2006 | 金属加工或金属切削液卫生与安全相关文献的使用指南 | Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
| ANSI/ASTM E2473-2006 | 电子健康记录的职业/环境卫生的使用规程 | Practice for the Occupational/Environmental Health View of the Electronic Health Record |
| ANSI/ASTM E2553-2007 | 自动通用卫生保健识别系统实施用指南 | Guide for the Implementation of a Voluntary Universal Healthcare Identification System |
| ANSI/ASTM F2039-2000 | 船上职业卫生与健康方案基本要素指南 | Guide for the Basic Elements of a Shipboard Occupational Health and Safety Program |
| ANSI/ASTM F2363-2006 | 美国海岸警卫队Ii型或Imo Marpol 73/78附录Iv海上卫生装置(流动通过处理)的规范 | Specification for United States Coast Guard Type Ii or Imo Marpol 73/78 Annex Iv Marine Sanitation Devices (Flow-Through Treatment) |
| ANSI/AWS D18.1-1999 | 卫生洁具用奥氏体不锈钢管和管道的焊接规范 | Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygenic) Applications |
| ANSI/AWS D18.3/D 18.3M-2005 | 卫生用途的槽罐、容器和其他设备的焊接规范 | Specification for Welding of Tanks, Vessels, and Other Equipment in Sanitary (Hygienic) Applications |
| ANSI/BISSC Z50.2-2003 | 烘烤设备.环境卫生标准 | Bakery Equipment - Sanitation Standard |
| ANSI/HIBC 1.2-2006 | 公共卫生业条形码(HIBC)提供者用标准 | Health Industry Bar Code (HIBC) Provider Applications Standard |
| ANSI/HL7 V2.6-2007 | 卫生保健环境中电子数据交换的健康水平7个标准版本2.5.1应用协议 | Health Level Seven Standard Version 2.5.1 An Application Protocol for Electronic Data Exchange in Healthcare Environments |
| ANSI/MEDBIQ LO.10.1-2008 | 卫生保健知识对象元数据 | Healthcare Learning Object Metadata |
| ANSI/MEDBIQ PP.10.1-2008 | 卫生保健专业简介 | Healthcare Professional Profile |
| ANSI/NSF 24-1988 | 用于活动房屋和游乐车的卫生管道系统零件 | Plumbing System Components for Manufactured Homes and Recreational Vehicles |
| ANSI/NSF 3-A14159-1-2002 | 肉和家禽加工设备设计的卫生要求 | Hygiene Requirements for the Design of Meat and Poultry Processing Equipment |
| ANSI/NSF 3-A14159-1999 | 机械设计的卫生要求 | Hygiene Requirements for the Design of Machinery |
| ANSI/NSF 3-A14159-2-2003 | 肉类和家禽加工用手持工具设计的卫生要求 | Hygiene Requirements for the Design of Hand Held Tools Used in Meat and Poultry Processing |
| ANSI/NSF 3-A14159-3-2005 | 肉和家禽加工用机械带式传送机设计的卫生要求 | Hygiene Requirements for the Design of Mechanical Belt Conveyors Used in Meat and Poultry Processing (i2) |
| ASME A112.1.3-2000 | 与卫生设备、器具和附件一起使用的空隙配件 | (Air gap fittings for use with plumbing fixtures, appliances, and appurtenances) |
| ASME A112.18.1-2003 | 卫生设备配件 | (Plumbing fixture fittings) |
| ASME A112.18.3-2002 | 卫生设备配件中防逆流装置和系统的性能要求 | (Performance requirements for backflow protection devices and systems in plumbing fixture fittings) |
| ASME A112.19.1M Supplement 1-1 | 搪瓷铸铁卫生设备.补充件1 | (Enameled cast iron plumbing fixtures; Supplement 1) |
| ASME A112.19.2M Supplement 1-2 | 瓷质卫生设备.补充件1 | (Vitreous China plumbing fixtures; Supplement 1) |
| ASME A112.19.2M-1998 | 瓷质卫生设备 | (Vitreous China plumbing fixtures) |
| ASME A112.19.3 Supplement 1-20 | 不锈钢卫生设备(为住宅使用设计).补充件1 | (Stainless steel plumbing fixtures (designed for residential use); Supplement 1) |
| ASME A112.19.4M Supplement 1-1 | 搪瓷铸钢卫生设备.补充件1 | (Porcelain enameled formed steel plumbing fixtures; Supplement 1) |
| ASME A112.19.9M Supplement 1-2 | 未上釉陶瓷卫生设备.补充件1 | (Non-vitreous ceramic plumbing fixtures; Supplement 1) |
| ASME A112.3.1-1993 | 在地上/地下,卫生、暴雨和化工用不锈钢排水系统的安装程序和性能标准 | (Performance standard and installation procedures for stainless steel drainage systems for sanitary, storm, and chemical applications, above and below ground) |
| ASME A112.6.1M-1997 | 公用悬空卫生设备用地板固定的支架 | (Floor-affixed supports for off-the-floor plumbing fixtures for public use) |
| ASTM A1015-2001(2005) | 卫生洁具用管形制品的目视内孔探测检验的标准指南 | Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications |
| ASTM C1300-1995(2007) | 用干涉法测定玻璃原料和卫生陶瓷材料线性热膨胀的标准试验方法 | Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method |
| ASTM C1510-2001(2007) | Abriged分光光度测量法测定卫生陶瓷颜色和色差的标准试验方法 | Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
| ASTM C323-1956(2006) | 卫生陶瓷粘土的化学分析的试验方法 | Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays |
| ASTM C329-1988(2006) | 焙烧卫生陶瓷材料比重的标准试验方法 | Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials |
| ASTM C370-1988(2006) | 焙烧卫生陶瓷制品受潮膨胀的标准试验方法 | Standard Test Method for Moisture Expansion of Fired Whiteware Products |
| ASTM C372-1994(2007) | 用膨胀仪测定搪瓷及釉面焙烧制品与焙烧卫生陶瓷制品的线性热膨胀的标准试验方法 | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method |
| ASTM C373-1988(2006) | 焙烧卫生陶瓷制品的吸水率、松密度、表观多孔性与表观比重的标准试验方法 | Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products |
| ASTM C408-1988(2006) | 卫生陶瓷制品传热性的试验方法 | Standard Test Method for Thermal Conductivity of Whiteware Ceramics |
| ASTM C424-1993(2006) | 用热压处理法测定焙烧卫生釉瓷抗破裂性的标准试验方法 | Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment |
| ASTM C554-1993(2006) | 用热冲击法测定焙烧上釉卫生陶瓷器抗裂开的标准试验方法 | Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method |
| ASTM C584-1981(2006) | 卫生陶瓷器具和有关制品的透光光泽度的试验方法 | Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products |
| ASTM C674-1988(2006) | 卫生陶瓷材料的挠曲特性的试验方法 | Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials |
| ASTM C848-1988(2006) | 用共振法测定卫生陶瓷的杨氏模量、切变模量和泊松比的标准试验方法 | Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio For Ceramic Whitewares by Resonance |
| ASTM C849-1988(2006) | 卫生陶瓷努氏压痕硬度的试验方法 | Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares |
| ASTM C866-1977(2006) | 卫生陶瓷粘土的过滤速率的测试方法 | Standard Test Method for Filtration Rate of Ceramic Whiteware Clays |
| ASTM C867-1994(2007) | 卫生陶瓷粘土中可溶性硫酸盐的标准试验方法(光度法) | Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method) |
| ASTM C949-1980(2007) | 用颜料渗入法测定上釉卫生陶瓷孔穴率的标准试验方法 | Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration |
| ASTM D5926-2004 | 排水管、排废水和排气管(DWV)、下水沟、卫生设施和暴雨管道系统用聚氯乙烯垫圈的标准规范 | Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
| ASTM D6548-2000(2005) | 薄棉卫生纸抗机械穿透性的试验方法(球爆裂过程) | Standard Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure) |
| ASTM E1174-2006 | 评价卫生保健人员洗手模式效果的测试方法 | Test Method for Evaluation of the Effectiveness of Health Care Personnel Handwash Formulations |
| ASTM E1671-1995a(2005) | 办公设备对于清洁卫生的适用性标准分类 | Standard Classification for Serviceability of an Office Facility for Cleanliness |
| ASTM E1838-2002 | 利用成人自愿者试验液体卫生洗手剂的去除病毒有效性的标准试验方法 | Standard Test Method for Determining the Virus-Eliminating Effectiveness of Liquid Hygienic Handwash and Handrub Agents Using the Fingerpads of Adult Volunteers |
| ASTM E2148-2006 | 与金属加工或金属切削液卫生与安全性相关的使用文献标准指南 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
| ASTM E2212-2002a | 卫生管理认证书政策的标准实施规程 | Standard Practice for Healthcare Certificate Policy |
| ASTM E2276-2003e1 | 用成人受验者的指形垫片测定卫生洗手和擦手剂除菌效果的标准试验方法 | Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adult Subjects |
| ASTM E2318-2003 | 军事部署用环境卫生现场评估方法标准指南 | Standard Guide for Environmental Health Site Assessment Process for Military Deployments |
| ASTM E2406-2004 | 评价高效洗涤中使用的洗衣卫生消毒剂和灭菌剂的标准试验方法 | Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations |
| ASTM E2553-2007 | 自动通用卫生保健识别系统实施的标准指南 | Standard Guide for Implementation of a Voluntary Universal Healthcare Identification System |
| ASTM F2363-2006 | 美国海岸警卫队II型或IMO MARPOL 73/78附件IV海上卫生设施的标准规范 | Standard Specification for United States Coast Guard Type II or IMO MARPOL 73/78 Annex IV Marine Sanitation Devices (Flow Through Treatment) |
| UL 1431-1996 | 个人用卫生和保健设备 | (Personal hygiene and health care appliances ) |
| 编号 | 中文名称 | 英文名称 |