| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 60335-2-52 AMD 1-2008 | 家用和类似用途电器.安全.第2-52部分:口腔卫生电器的特殊要求.修改件1 | Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances; Amendment 1 |
| IEC 60335-2-52 Edition 3.1-2008 | 家用和类似用途电器.安全性.第2-52部分:用于口部的卫生器具的特殊要求 | Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances |
| ISO 10882-1-2001 | 焊接和相关工艺的卫生和安全 操作人员呼吸区域的空气中悬浮颗粒物及气体的取样 第1部分：空气中悬浮颗粒 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles |
| ISO 10882-2-2000 | 焊接和相关工艺的卫生与安全 工作人员呼吸区域中空气中悬浮颗粒物及气体的取样 第2部分:气体取样 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases |
| ISO 11135-1-2007 | 卫生保健品灭菌.环氧乙烷.第1部分:医疗设备消毒过程的制定、确认和常规控制的要求 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO 11140-3 Technical Corrigendum 1-2007 | 卫生保健品的灭菌.化学指示剂.第3部分:布维-狄(Bowie and Dick)蒸汽渗透试验用2号指示剂系统.技术勘误1 | Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test; Technical Corrigendum 1 |
| ISO 11140-3-2007 | 卫生保健品的灭菌.化学指示剂.第3部分:布维-狄克(Bowie and Dick-type)蒸汽穿透试验用2级指示剂体系 | Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
| ISO 11140-4-2007 | 卫生保健品的灭菌.化学指示剂.第4部分:蒸汽穿透检测布维-狄(Bowie and Dick)形式试验的2级指示剂 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| ISO 11140-5-2007 | 卫生保健品的灭菌.化学指示剂.第5部分:布维-狄克形式(Bowie and Dick-type)除气试验的2级指示剂 | Sterilization of health care products - Chemical indicators - Part 5: Class 2 indicators for Bowie and Dick-type air removal tests |
| ISO 12052-2006 | 医用信息.包括工作流程和数据管理的医药卫生用数字呈像和通信技术 | Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management |
| ISO 13408-3-2006 | 卫生保健产品的无菌工艺.第3部分:冻干法 | Aseptic processing of health care products - Part 3: Lyophilization |
| ISO 14159-2002 | 机械安全.机械设计的卫生要求 | Safety of machinery - Hygiene requirements for the design of machinery |
| ISO 14729-2001 | 眼科光学 接触镜保护产品 产品的微生物要求及检验方法和接触镜的卫生管理方法 | Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses |
| ISO 15011-4-2006 | 焊接和相关工艺的卫生和安全.烟尘和气体取样的实验室方法.第4部分:烟尘数据单 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 4: Fume data sheets |
| ISO 15012-2-2008 | 焊接和相关工艺中的卫生和安全.空气过滤设备的要求、测试和标记.第2部分:采集罩和喷嘴的最小空气体积流率的 | Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles |
| ISO 15749-1-2004 | 船舶和海上技术.船舶和海上结构物的排水系统.第1部分:卫生排水系统设计 | Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design |
| ISO 15749-2-2004 | 船舶和海上技术.船舶和海上结构物的排水系统.第2部分:重力系统用卫生排水和排水管道 | Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity systems |
| ISO 15749-3-2004 | 船舶和海上技术.船舶和海上结构物的排水系统.第3部分:真空系统用卫生排水和排水管道 | Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems |
| ISO 15749-4-2004 | 船舶和海上技术.船舶和海上结构物的排水系统.第4部分:卫生排水、污水处理管 | Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes |
| ISO 16408-2004 | 牙科学.口腔卫生制品.口腔冲洗 | Dentistry - Oral hygiene products - Oral rinses |
| ISO 16409-2006 | 牙科学.口腔卫生制品.手动牙刷 | Dentistry - Oral hygiene products - Manual interdental brushes |
| ISO 17090-2-2008 | 卫生信息学.公开密钥基础设施.第2部分:认证轮廓 | Health informatics - Public key infrastructure - Part 2: Certificate profile |
| ISO 21469-2006 | 机械安全.与附属产品接触的润滑剂.卫生要求 | Safety of machinery - Lubricants with incidental product contact - Hygiene requirements |
| ISO 4067-2-1980 | 建筑和土木工程制图 设备 第2部分:卫生器材的简化画法 | Building and civil engineering drawings; Installations; Part 2 : Simplified representation of sanitary appliances |
| ISO 8086-2004 | 乳品厂.卫生条件.检验通用指南和取样程序 | Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures |
| ISO/R 784-1968 | 船舶卫生系统安装图常用符号 | Conventional signs to be used in schemes for the installations of sanitary systems in ships |
| ISO/TR 13668-1998 | 口腔卫生及护理用数字代码 | Digital coding of oral health and care |
| ISO/TR 18307-2001 | 卫生信息学 信息交换和通信标准中的互操作性和兼容性 关键特性 | Health informatics - Interoperability and compatibility in messaging and communication standards - Key characteristics |
| ISO/TS 11135-2-2008 | 卫生保健品的消毒.环氧乙烷.第2部分:ISO 11135-1应用指南 | Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO 11135-1 |
| ISO/TS 15011-5-2006 | 焊接和相关工艺的卫生和安全.烟尘和气体取样的实验室法.第5部分:完全或部分有机材料组成的产品在焊接或切割 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials |
| ISO/TS 19979-2004 | 眼科光学.接触镜片.由多位患者试用的接触镜片的卫生管理 | Ophthalmic optics - Contact lenses - Hygienic management of multipatient use trial contact lenses |
| IWA 1-2005 | 质量管理体系.卫生服务组织的过程改进指南 | Quality management systems - Guidelines for process improvements in health service organizations |
| 编号 | 中文名称 | 英文名称 |