编号 | 中文名称 | 英文名称 |
IEC 60068-2-17-1994
| 基本环境试验规程 第2-17部分:试验 试验Q:密封
| Basic environmental testing procedures - Part 2: Tests - Test Q: Sealing
|
IEC 60191-6-8-2001
| 半导体器件的机械标准化 第6-8部分:表面安装半导体器件封装外形图绘制的一般规则 玻璃密封陶瓷四面扁平
| Mechanical standardization of semiconductor devices - Part 6-8: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for glass sealed ceramic quad flatpack (G-QFP)
|
IEC 60261-1989
| 加压波导管及其组件的密封试验
| Sealing test for pressurized waveguide tubing and assemblies
|
IEC 60512-12-6-1996
| 电子设备用机电元件 基本试验程序和测量方法 第12部分:锡焊试验 第6节:试验12f:机焊密封处耐焊剂和清洁溶剂
| Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering
|
IEC 60512-14-2-2006
| 电子设备用连接器.试验和测量.第14-2部分:密封试验.细微的漏气
| Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
|
IEC 60512-14-4-2006
| 电子设备用连接器.试验和测量.第14-4部分:密封试验.试验14d:浸入.防水
| Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - waterproof
|
IEC 60512-14-5-2006
| 电子设备用连接器.试验和测量.第14-5部分:密封试验.试验14e:低压浸入
| Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low (air) pressure
|
IEC 60512-14-6-2006
| 电子设备用连接器.试验和测量.第14-6部分:密封试验.试验14f:界面密封
| Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
|
IEC 60512-14-7-1997
| 电子设备用机电元件 基本试验程序和测量方法 第14部分:密封性试验 第7节:试验14g:冲水试验
| Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water
|
IEC 60622-2002
| 含碱性或其它非酸性电解液的蓄电池和蓄电池组.密封镍镉方形可充电单体电池
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells
|
IEC 60749-31 Corrigendum 1-2003
| 半导体器件.机械和气候试验方法.第31部分:塑料密封器件的易燃性(内部引起的)
| Semiconductor devices - Mechanical and climatic test methods - Part 31: Flammability of plastic-encapsulated devices (internally induced)
|
IEC 60749-31-2002
| 半导体器件.机械和气候试验方法.第31部分:塑料密封器件的易燃性(内部感应)
| Semiconductor devices - Mechanical and climatic test methods - Part 31: Flammability of plastic-encapsulated devices (internally induced)
|
IEC 60749-32 Corrigendum 1-2003
| 半导体器件.机械和气候试验方法.第32部分:塑料密封器件的易燃性(外部引起的)
| Semiconductor devices - Mechanical and climatic test methods - Part 32: Flammability of plastic-encapsulated devices (externally induced)
|
IEC 60749-32-2002
| 半导体器件.机械和气候试验方法.第32部分:塑料密封器件的易燃性(外部感应)
| Semiconductor devices - Mechanical and climatic test methods - Part 32: Flammability of plastic-encapsulated devices (externally induced)
|
IEC 60749-8 Corrigendum 1-2003
| 半导体器件.机械和气候试验方法.第8部分:密封
| Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing
|
IEC 60749-8 Corrigendum 2-2003
| 半导体器件.机械和气候试验方法.第8部分:密封
| Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing
|
IEC 60749-8-2002
| 半导体器件.机械和气候试验方法.第8部分:密封
| Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing
|
IEC 61020-4-2-1995
| 电子设备用机电开关 第4部分:杠杆(钮子)开关的分规范 第2节:电气最高交流电压为227V、最高直流电压为30V、
| Electromechanical switches for use in electronic equipment - Part 4: Sectional specification for lever (toggle) switches - Section 2: Detail specification for one pole, two pole, four pole, sealed lever (toggle) switches, 277 V a.c. maximum, 30 V d.c. maximum, 20 A maximum electrical rating
|
IEC 61020-6-2-1994
| 电子设备用机电开关 第6部分:微动开关的分规范 第2节:电气定额最高电压250V、最大电流5A的单级不密封超小型
| Electromechanical switches for use in electronic equipment - Part 6: Sectional specification for sensitive switches - Section 2: Detail specification for one pole, unsealed subminiature sensitive switches, 250 V maximum, 5 A maximum electrical rating
|
IEC 61076-7-100-2006
| 电子设备连接器.第7-100部分:电缆电源插座附件.由高负载矩形或圆形连接器罩和密封系统完整部件组成的米制电
| Connectors for electronic equipment - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system
|
IEC 61300-2-23-1995
| 纤维光学互连器件和无源元件 基本试验和测量程序 第2-23部分:试验 非加压式纤维光学器件外壳密封
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for not-pressurized closures of fibre optic devices
|
IEC 61300-2-25-1995
| 纤维光学互连器件和无源元件 基本试验和测量程序 第2-25部分:试验 外壳密封耐久性
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-25: Tests - Sealing endurance for closures
|
IEC 61300-2-38-2006
| 纤维光学互连器件和无源元件.基本试验和测量程序.第2-38部分:试验.加压纤维光学器件外壳密封
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures
|
IEC 61857-22-2002
| 电气绝缘结构.热评定规程.第22部分:密封圈模型的特殊要求.绕线电气绝缘结构(EIS)
| Electrical insulation systems - Procedures for thermal evaluation - Part 22: Specific requirements for encapsulated-coil model; Wire-wound electrical insulation system (EIS)
|
IEC 61951-1 AMD 1-2005
| 含碱性或其它非酸性电解质的二次电池和蓄电池.便携式密封可再充电单个电池.第1部分:镍镉电池.修改件1
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium; Amendment 1
|
IEC 61951-1 Edition 2.1-2006
| 含碱性或其它非酸性电解质的二次电池和蓄电池组.便携式密封可再充电单电池.第1部分:镍镉电池
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium
|
IEC 61951-1-2003
| 含碱性或其它非酸性电解质的二次电池和蓄电池组.便携式密封可再充电单电池.第1部分:镍镉电池
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium
|
IEC 61951-2-2003
| 含碱性或其它非酸性电解质的二次电池和蓄电池组.便携式密封可再充电单电池.第2部分:镍金属氢化物电池
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride
|
IEC 61959-2004
| 含碱性或其它非酸性电解质的蓄电池和蓄电池组.密封的便携式蓄电池和蓄电池组的机械试验
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries
|
IEC 62133-2002
| 含碱性或其它非酸性电解液的蓄电池和蓄电池组.便携式密封蓄电池和蓄电池组的安全要求
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
|
IEC 62339-1-2006
| 表面安装流体分配部件用模块组成接口.第1部分:弹性密封件
| Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals
|
IEC/TR 62188-2003
| 含有碱性或其他非酸性电解液的蓄电池和蓄电池组.密封蓄电池制成的便携式蓄电池组的设计和制造推荐规范
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Design and manufacturing recommendations for portable batteries made from sealed secondary cells
|
ISO 10295-1-2007
| 建筑单元和构件的燃烧试验.服务设施的燃烧测试.第1部分:渗透密封
| Fire tests for building elements and components - Fire testing of service installations - Part 1: Penetration seals
|
ISO 10552-1999
| 计时仪器 柄头和密封管 设计和尺寸
| Timekeeping instruments - Crowns and sealed tubes - Designs and dimensions
|
ISO 10563-2005
| 房屋建筑.密封胶.质量和体积变化的测定
| Building construction - Sealants - Determination of change in mass and volume
|
ISO 10590-2005
| 房屋建筑.密封胶.浸水后保持延伸的密封胶拉伸性能的测定
| Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water
|
ISO 10591-2005
| 房屋建筑.密封胶.浸水后密封胶粘结/粘合性能的测定
| Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water
|
ISO 10648-1-1997
| 密封箱室 第1部分:设计原则
| Containment enclosures - Part 1: Design principles
|
ISO 10648-2-1994
| 密封箱室 第2部分:密封性分级及其检验方法
| Containment enclosures - Part 2: Classification according to leak tightness and associated checking methods
|
ISO 11289-1993
| 密封容器中的加热食品 pH值的测定
| Heat-processed foods in hermetically sealed containers; determination of pH
|
ISO 11431-2002
| 房屋建筑.连接件.受热、水和透过玻璃的人造光照射后密封胶的粘合性的测定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
|
ISO 11432-2005
| 房屋建筑.密封胶.耐压性的测定
| Building construction - Sealants - Determination of resistance to compression
|
ISO 11600-2002
| 房屋建筑.连接件.密封胶的分类和要求
| Building construction - Jointing products - Classification and requirements for sealants
|
ISO 11607-2-2006
| 终端无菌医学设备的包装.第2部分:组成、密封和装配过程的确认要求
| Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes
|
ISO 1179-1-2007
| 通用和液压传动用连接件.带弹性体密封件或金属对金属密封件的ISO 228-1螺纹开口和螺柱端头.第1部分:螺纹开
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports
|
ISO 1179-2-2007
| 通用和液压传动用连接件.带弹性体密封件或金属对金属密封件的ISO 228-1螺纹开口和螺柱端头.第2部分:带弹性
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
|
ISO 1179-3-2007
| 通用和液压传动用连接件.带弹性体密封件或金属对金属密封件的ISO 228-1螺纹开口和螺柱端头.第3部分:带扣环O
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
|
ISO 1179-4-2007
| 通用和液压传动用连接件.带弹性体密封件或金属对金属密封件的ISO 228-1螺纹开口和螺柱端头.第4部分:通用只
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
|
ISO 11926-1-1995
| 通用和液压传动用联接件 带ISO 725螺纹和O形圈密封的油口和螺纹端头 第1部分:锪孔沟槽中装有O形密封圈的油
| Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 1: Ports with O-ring seal in truncated housing
|
ISO 11926-2-1995
| 通用和液压传动用联接件 带ISO 725螺纹和O形圈密封的油口和螺纹端头 第2部分:重型(S 系列)螺栓端头
| Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 2: Heavy-duty (S series) stud ends
|
ISO 11926-3-1995
| 通用和液压传动用联接件 带ISO 725螺纹和O形圈密封的油口和螺纹端头 第3部分:轻型(L 系列)螺栓端头
| Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends
|
ISO 11933-1-1997
| 密封箱室部件 第1部分:手套/封袋接盘、手套/封袋孔盖、密封环和可更换装置
| Components for containment enclosures - Part 1: Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units
|
ISO 11933-2-1997
| 密封箱室部件 第2部分:手套、焊封袋、剑式机械手护套和主从机械手护套
| Components for containment enclosures - Part 2: Gloves, welded bags, gaiters for remote-handling tongs and for manipulators
|
ISO 11933-3-1998
| 密封箱室部件 第3部分:转运装置如简易门、前室、双盖门转运装置、废物桶密封连接件
| Components for containment enclosures - Part 3: Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums
|
ISO 11933-4-2001
| 密封箱室部件 第4部分:通风和气体清洁系统,诸如:过滤器、捕获器、安全和调节阀、控制和保护器件
| Components for containment enclosures - Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices
|
ISO 11933-5-2001
| 密封箱室部件 第5部分:电循环系统和流体循环系统的渗透性
| Components for containment enclosures - Part 5: Penetrations for electrical and fluid circuits
|
ISO 1198-1972
| 航空器的密封光束着陆灯 尺寸
| Sealed-beam landing lamps for aircraft; Dimensions
|
ISO 12151-1-1999
| 液压传动和通用联接件 软管接头 第1部分:带ISO 8434-3 O形圈端面密封末端的软管接头
| Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
|
ISO 12472-2003
| 木制门组件的耐火性.膨胀型密封剂工效的测定方法
| Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals
|
ISO 12925-1 Technical Corrigendum 1-2002
| 润滑剂、工业用油和相关产品(L类).(齿轮)C种.第1部分:密封齿轮系统用润滑剂.技术勘误1
| Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems; Technical Corrigendum 1
|
ISO 13412-1997
| 航空航天 飞机结构用轭型单列密封的滚针滚道式滚子 英制系列
| Aerospace - Airframe needle track roller, yoke type, single-row, sealed - Inch series
|
ISO 13413-1997
| 航空航天 飞机结构用轭型、双列密封的滚针滚道式滚子 英制系列
| Aerospace - Airframe needle track roller, yoke type, double-row, sealed - Inch series
|
ISO 13415-1997
| 航空航天 飞机结构用柱型单列密封的滚针滚道式滚子 英制系列
| Aerospace - Airframe needle track roller, stud type, single-row, sealed - Inch series
|
ISO 13416-1997
| 航空航天 飞机结构用轭型单列密封的滚针滚道式滚子 米制系列
| Aerospace - Airframe needle track roller, yoke type, single-row, sealed - Metric series
|
ISO 13417-1997
| 航空航天 飞机结构用柱型单列密封的滚针滚道式滚子 米制系列
| Aerospace - Airframe needle track roller, stud type, single-row, sealed - Metric series
|
ISO 13638-1996
| 房屋建筑 密封胶 耐长期浸泡水性能的测定
| Building construction - Sealants - Determination of resistance to prolonged exposure to water
|
ISO 13783-1997
| 塑料管道系统 硬聚氯乙烯(PVC-U)端部承受负荷的双承口连接件 密封和承受弯曲及内压的试验方法
| Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure
|
ISO 13844-2000
| 塑料管道系统 用于硬聚氯乙烯管道的弹性密封环式承口连接件 负压下密封试验方法
| Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure
|
ISO 13845-2000
| 塑料管道系统 用于硬聚氯乙烯管道的弹性密封环式承口连接件 内压下角度偏转密封试验方法
| Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection
|
ISO 13846-2000
| 塑料管道系统 热塑性加压塑料管道用端部负载轴承和非端部负载轴承的安装和连接 在内水压下长期密封的试验方
| Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaklightness under internal water pressure
|
ISO 14193-1998
| 航空航天 飞机结构用中等负荷扩展内圈单列自位密封球面滚子轴承 英制系列
| Aerospace - Airframe spherical roller bearings, single-row, self-aligning, sealed, extended inner ring, intermediate duty - Inch series
|
ISO 14194-1998
| 航空航天 飞机结构用重负荷扩展内圈自位双列密封球面滚子轴承 英制系列
| Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, extended inner ring, heavy duty - Inch series
|
ISO 14195-1998
| 航空航天 飞机结构用轻负荷扭力管设计的自位双列密封球面滚子轴承 英制系列
| Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, torque tube design, light duty - Inch series
|
ISO 14196-1998
| 航空航天 飞机结构用重负荷普通内圈自位双列密封球面滚子轴承 英制系列
| Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, plain inner ring, heavy duty - Inch series
|
ISO 14197-1998
| 航空航天 飞机结构用中等负荷自位单列密封球面滚子轴承 英制系列
| Aerospace - Airframe spherical roller bearings, single-row, self-aligning, sealed, intermediate duty - Inch series
|
ISO 14206-1998
| 航空航天 飞机结构用轻负荷单列刚性密封球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, sealed, light duty - Inch series
|
ISO 14207-1998
| 航空航天 飞机结构用轻负荷密封精密单列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, light duty - Inch series
|
ISO 14208-1998
| 航空航天 飞机结构用中等负荷密封单列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, sealed, intermediate duty - Inch series
|
ISO 14209-1998
| 航空航天 飞机结构用中等负荷密封精密单列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty - Inch series
|
ISO 14210-1998
| 航空航天 飞机结构用扭力管设计的轻负荷密封单列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty - Inch series
|
ISO 14211-1998
| 航空航天 飞机结构用轻负荷扭力管设计的单列刚性密封精密球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty - Inch series
|
ISO 14212-1998
| 航空航天 飞机结构用扭力管设计的超轻负荷密封单列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty - Inch series
|
ISO 14213-1998
| 航空航天 飞机结构用扭力管设计的超轻负荷密封精密单列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra light duty - Inch series
|
ISO 14214-1998
| 航空航天 飞机结构用重负荷密封双列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, double-row, rigid, sealed, heavy duty - Inch series
|
ISO 14215-1998
| 航空航天 飞机结构用重负荷密封精密双列刚性球轴承 英制系列
| Aerospace - Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty - Inch series
|
ISO 14216-1998
| 航空航天 飞机结构用重负荷密封双列自调心球轴承 英制系列
| Aerospace - Airframe ball bearings, double-row, self-aligning, sealed, heavy duty - Inch series
|
ISO 14217-1998
| 航空航天 飞机结构用重负荷密封精密双列自调心球轴承 英制系列
| Aerospace - Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty - Inch series
|
ISO 14218-1998
| 航空航天 飞机结构用重负荷密封单列自调心球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, heavy duty - Inch series
|
ISO 14219-1998
| 航空航天 飞机结构用重负荷密封精密单列自调心球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty - Inch series
|
ISO 14220-1998
| 航空航天 飞机结构用轻负荷密封单列自调心球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, self-aligning, sealed, light duty - Inch series
|
ISO 14221-1998
| 航空航天 飞机结构用轻负荷密封精密单列自调心球轴承 英制系列
| Aerospace - Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty - Inch series
|
ISO 14593-1999
| 水质 水介质中有机化合物最终有氧生物降解能力的评价 密封容器中无机碳分析法(CO2顶空试验)
| Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Method by analysis of inorganic carbon in sealed vessels (CO<(Index)2> headspace test)
|
ISO 14656-1999
| 钢筋混凝土用环氧树脂涂层钢的环氧树脂粉末和密封材料
| Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
|
ISO 15705-2002
| 水质.化学需氧量的测定(ST-COD).小型密封管法
| Water quality - Determination of the chemical oxygen demand index (ST-COD) - Small-scale sealed-tube method
|
ISO 15750-2-2002
| 包装.钢筒.第2部分:最小总容量为 212 l, 216,5 l 和 230 l的密封盖圆筒
| Packaging - Steel drums - Part 2: Non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l
|
ISO 15750-3-2002
| 包装.钢筒.第3部分:钢桶用插入法兰型密封系统
| Packaging - Steel drums - Part 3: Inserted flange-type closure systems
|
ISO 15783-2002
| 无密封旋转动力泵.2级.规范
| Seal-less rotodynamic pumps - Class II - Specification
|
ISO 15838-2003
| 船舶与海上技术.管道设施中使用的带密封衬垫的机械耦合配件.性能规范
| Ships and marine technology - Fittings for use with gasketed mechanical couplings used in piping applications - Performance specification
|
ISO 16010-2005
| 弹性密封件.传送气体燃料和烃类液体的管和配件用密封件的材料要求
| Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
|
ISO 16031-1-2002
| 航空航天液压系统.英制系列O型密封圈:内直径和横截面,公差和尺寸认证编码.第1部分:液压系统近似公差
| Aerospace fluid systems - O-rings, inch series: Inside diameters and cross sections, tolerances and size-identification codes - Part 1: Close tolerances for hydraulic systems
|
ISO 16031-2-2003
| 航空航天流体系统.英制系列O型密封圈:内直径和横截面、公差和尺寸识别码.第2部分:非液压系统的标准公差
| Aerospace fluid systems - O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes - Part 2: Standard tolerances for non-hydraulic systems
|
ISO 16589-1-2001
| 带热塑密封件的旋转轴唇型密封 第1部分:标称尺寸和公差
| Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 1: Nominal dimensions and tolerances
|
ISO 16589-2-2001
| 带热塑密封件的旋转轴唇型密封 第2部分:词汇
| Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 2: Vocabulary
|
ISO 16589-3-2001
| 带热塑密封件的旋转轴唇型密封 第3部分:储存、搬运和安装
| Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 3: Storage, handling and installation
|
ISO 16589-4-2001
| 带热塑密封件的旋转轴唇型密封 第4部分:性能试验程序
| Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 4: Performance test procedures
|
ISO 16589-5-2001
| 带热塑密封件的旋转轴唇型密封 第5部分:外观缺陷的识别
| Rotary shaft lip-type seals incorporating thermoplastic sealing elements - Part 5: Identification of visual imperfections
|
ISO 1749-1973
| 航空器 弹性密封圈 包装和识别
| Aircraft; Elastomeric sealing rings; Packaging and identification
|
ISO 18185-1-2007
| 货运集装箱.电子密封.第1部分:通信协议
| Freight containers - Electronic seals - Part 1: Communication protocol
|
ISO 18185-2-2007
| 货运集装箱.电子密封.第2部分:应用要求
| Freight containers - Electronic seals - Part 2: Application requirements
|
ISO 18185-3-2006
| 货运集装箱.电子密封.第3部分:环境特征
| Freight containers - Electronic seals - Part 3: Environmental characteristics
|
ISO 18185-4-2007
| 货运集装箱.电子密封.第4部分:数据保护
| Freight containers - Electronic seals - Part 4: Data protection
|
ISO 18185-5-2007
| 货运集装箱.电子密封.第5部分:物理层
| Freight containers - Electronic seals - Part 5: Physical layer
|
ISO 18902-2001
| 成像材料 处理过的胶卷、照相干板和像纸 材料密封和储存容器
| Imaging materials - Processed photographic films, plates and papers - Filing enclosures and storage containers
|
ISO 18916-2007
| 成像材料.处理过的成像材料.密封材料的摄影活性试验
| Imaging materials - Processed imaging materials - Photographic activity test for enclosure materials
|
ISO 19921-2005
| 船舶和海上技术.带弹性密封件的金属管道部件的耐火性.试验方法
| Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Test methods
|
ISO 19922-2005
| 船舶和海上技术.带弹性密封件的金属管道部件的耐火性.试验台要求
| Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Requirements imposed on the test bench
|
ISO 2035-1974
| 压力下使用的弹性密封圈式连接的硬聚氯乙烯(PVC)注塑管件 耐压试验
| Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure; Pressure-resistance test
|
ISO 2045-1988
| 弹性密封环型连接的硬聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C)压力管的单承口 最小配合深度
| Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints; minimum depths of engagement
|
ISO 2048-1990
| 弹性密封圈型接头的硬聚氯乙烯(PVC-U)压力管的双承口 最小配合深度
| Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints; minimum depths of engagement
|
ISO 20848-2-2006
| 包装.塑料桶.第2部分:标称容量208.2 L~220 L的固定盖(密封盖)圆桶
| Packaging - Plastics drums - Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l
|
ISO 21049-2004
| 泵.离心和旋转泵用轴密封系统
| Pumps - Shaft sealing systems for centrifugal and rotary pumps
|
ISO 228-1-2000
| 非螺纹密封的管螺纹 第1部分:标记、尺寸和公差
| Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
|
ISO 228-2-1987
| 非螺纹密封的管螺纹 第2部分:用极限量规检验
| Pipe threads where pressure-tight joints are not made on the threads; Part 2 : Verification by means of limit gauges
|
ISO 2315-1980
| 航空器 2A和3A型双极和四极密封电磁继电器 间隙和固定尺寸
| Aircraft; Two- and four-pole sealed electromagnetic relays, 2 A and 3 A; Clearance and fixing dimensions
|
ISO 23711-2003
| 弹性密封件.灌溉和排水设施用管接头密封件材料的要求.弹性塑料
| Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers
|
ISO 2919-1999
| 辐射防护 密封放射源 一般要求和分级
| Radiation protection - Sealed radioactive sources - General requirements and classification
|
ISO 3069-2000
| 端吸离心泵 机械密封和软填料密封腔的尺寸
| End-suction centrifugal pumps - Dimensions of cavities for mechanical seals and for soft packing
|
ISO 3458-1976
| 聚乙烯(PE)压力管材和管件间的装配接头 内压密封试验
| Assembled joints between fittings and polyethylene (PE) pressure pipes ; Test of leakproofness under internal pressure
|
ISO 3503-1976
| 聚乙烯(PE)压力管材和管件间的装配接头 弯曲时承受内压的密封试验
| Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of leakproofness under internal pressure when subjected to bending
|
ISO 3601-1-2002
| 流体动力系统.O型密封圈.第1部分:内径、横截面、公差和尺寸识别编码
| Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and size identification code
|
ISO 3601-3-2005
| 流体动力系统.O型密封圈.第3部分:质量验收准则
| Fluid power systems - O-rings - Part 3: Quality acceptance criteria
|
ISO 3601-5-2002
| 流体动力系统.0型密封圈.第5部分:工业用弹性材料的适宜性
| Fluid power systems - O-rings - Part 5: Suitability of elastomeric materials for industrial applications
|
ISO 3603-1977
| 弹性密封圈式硬聚氯乙烯(PVC)压力管件 密封压力试验
| Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints; Pressure test for leakproofness
|
ISO 3604-1976
| 弹性密封圈式硬聚氯乙烯(PVC)压力管件 外水压条件下的密封压力试验
| Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints; Pressure test for leakproofness under conditions of external hydraulic pressure
|
ISO 3925-1978
| 非密封放射性物质 识别和证书
| Unsealed radioactive substances; Identification and certification
|
ISO 3939-1977
| 流体传动系统和元件 多层唇形密封组件 测量叠合高度的方法
| Fluid power systems and components; Multiple lip packing sets; Methods for measuring stack heights
|
ISO 4039-1-1998
| 道路车辆 气压制动系统 第1部分:有平面密封面的管、阳螺纹管接头和螺纹孔
| Road vehicles - Pneumatic braking systems - Part 1: Pipes, male fittings and tapped holes with facial sealing surface
|
ISO 4039-2-1998
| 道路车辆 气压制动系统 第2部分:有锥形密封面的管、阳螺纹管接头和螺纹孔
| Road vehicles - Pneumatic braking systems - Part 2: Pipes, male fittings and tapped holes with conical sealing surface
|
ISO 4089-1979
| 造船 内河航行 货舱盖的密封橡胶
| Shipbuilding; Inland navigation; Sealing rubber for covers of cargo hatches
|
ISO 4633-2002
| 橡胶密封.供水、排水和污水管道用密封圈.材料规范
| Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
|
ISO 4635-1982
| 硫化橡胶 混凝土公路伸缩缝用预成型压缩密封件 材料规范
| Rubber, vulcanized; Preformed compression seals for use between concrete motorway paving sections; Specification for material
|
ISO 483-2005
| 塑料.用于使用水溶液进行调节和试验保持恒定湿度的小型密封容器
| Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
|
ISO 4928-2006
| 道路车辆.使用非石油基液压制动液的液压制动系统液压缸的弹性皮碗和密封圈(最高工作温度120℃)
| Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
|
ISO 4929-1978
| 道路车辆 使用非石油基液压制动液的液压制动主液压缸储油器的膜片密封垫
| Road vehicles; Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid
|
ISO 4930-2006
| 道路车辆.使用非石油基液压制动液的液压制动盘式液压缸的弹性密封垫(最高工作温度150℃)
| Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150° C max.)
|
ISO 5597-1987
| 液压传动 缸筒 往复用活塞和活塞杆密封沟槽 尺寸和公差
| Hydraulic fluid power; Cylinders; Housings for piston and rod seals in reciprocating applications; Dimensions and tolerances
|
ISO 6118-2006
| 道路车辆.使用非石油基制动液的液压制动促动缸的弹性皮碗和密封圈(最高工作温度70℃)
| Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.)
|
ISO 6119-2006
| 道路车辆.使用非石油基液压制动液的液压盘式制动液压缸的弹性密封垫(最高工作温度120℃)
| Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.)
|
ISO 6149-1-2006
| 用于液压流体传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第1部分:带锪孔沟槽中装有
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal
|
ISO 6149-2-2006
| 用于液压传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第2部分:重型(S系列)螺柱端头
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
|
ISO 6149-3-2006
| 用于液压传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第3部分:轻型(L系列)螺柱端头
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
|
ISO 6149-4-2006
| 用于传动和一般用途的管接头.带ISO 261螺纹和O形圈密封的油口和螺纹端头.第4部分:内外六角气门栓的尺寸、设
| Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
|
ISO 6194-1-2007
| 与弹性密封件结合的旋转轴唇型密封件.第1部分:标称尺寸和公差
| Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 1: Nominal dimensions and tolerances
|
ISO 6194-2-1991
| 旋转轴唇型密封件 第2部分:词汇 两种语言版
| Rotary shaft lip type seals; part 2: vocabulary
|
ISO 6194-3-1988
| 旋转轴唇型密封件 第3部分:储存、运输和安装
| Rotary shaft lip type seals; part 3: storage, handling and installation
|
ISO 6194-4-1999
| 旋转轴唇型密封件 第4部分:性能试验程序
| Rotary shaft lip type seals - Part 4: Performance test procedures
|
ISO 6194-5-1990
| 旋转轴唇型密封件 第5部分:外观缺陷的标注
| Rotary shaft lip type seals; part 5: identification of visual imperfections
|
ISO 6205-1988
| 内河船 常规密封系统 基本技术要求
| Inland navigation vessels; customs sealing systems; basic technical requirements
|
ISO 6447-1983
| 橡胶密封件 供气管和配件用密封环 材料规范
| Rubber seals; Joint rings used for gas supply pipes and fittings; Specification for material
|
ISO 6448-1985
| 橡胶密封件 输送石油产品管道和配件用密封圈 材料规范
| Rubber seals; Joint rings used for petroleum product supply pipes and fittings; Specification for material
|
ISO 6455-1983
| 承压管用带弹性密封圈型接头的硬聚氯乙烯(PVC)管件 安装长度的测定 公制系列
| Unplasticized polyvinyl chloride (PVC) fittings with elastic sealing ring type joints for pipes under pressure; Dimensions of laying lengths; Metric series
|
ISO 6547-1981
| 液压传动 缸筒 装有支撑环的活塞密封沟槽 尺寸和公差
| Hydraulic fluid power; Cylinders; Piston seal housings incorporating bearing rings; Dimensions and tolerances
|
ISO 6927-1981
| 房屋建筑 连接件 密封件 词汇 两种语言版
| Building construction; Jointing products; Sealants; Vocabulary Bilingual edition
|
ISO 7-1 Technical Corrigendum 1-2007
| 螺纹上有压力密封接缝的管螺纹.第1部分:尺寸、公差和标志.技术勘误1
| Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation; Technical Corrigendum 1
|
ISO 7-1-1994
| 用螺纹密封的管螺纹 第1部分:尺寸、公差与标记
| Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
|
ISO 7-2-2000
| 用螺纹密封的管螺纹 第2部分:用极限量规检验
| Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by means of limit gauges
|
ISO 7320-1992
| 航空航天 流体系统螺纹密封连接接头 尺寸
| Aerospace; couplings, threaded and sealed, for fluid systems; dimensions
|
ISO 7389-2002
| 房屋建筑.连接件.密封胶回弹性的测定
| Building construction - Jointing products - Determination of elastic recovery of sealants
|
ISO 7390-2002
| 房屋建筑.连接件.密封胶流动阻力的测定
| Building construction - Jointing products - Determination of resistance to flow of sealants
|
ISO 7425-1-1988
| 液压传动 弹性体赋能塑料面密封沟槽 尺寸和公差 第1部分:活塞密封沟槽
| Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 1: piston seal housings
|
ISO 7425-2-1989
| 液压传动 弹性体赋能塑料面密封沟槽 尺寸和公差 第2部分:活塞杆密封沟槽
| Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 2: rod seal housings
|
ISO 7432-2002
| 玻璃纤维增强热固性塑料管道和管配件.检验设计带弹性体密封件的锁紧套筒连接件,包括双插孔连接件的试验方法
| Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
|
ISO 7511-1999
| 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材和管件 确定短期内压下管壁密封性的检验方法
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure
|
ISO 7630-1985
| 道路车辆 使用石油基液压制动液的鼓式制动轮缸的弹性O形密封圈(最高工作温度120℃)
| Road vehicles; Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
|
ISO 7631-1985
| 道路车辆 使用石油基液压制动液的液压制动系统液压缸的弹性皮碗和密封垫圈(最高工作温度120℃)
| Road vehicles; Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
|
ISO 7632-1985
| 道路车辆 使用石油基液压制动液的液压盘式制动液压缸的弹性密封垫圈(最高工作温度120℃)
| Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
|
ISO 7986-1997
| 液压传动 密封装置 评定用于液压往复运动用途的密封件性能的标准试验方法
| Hydraulic fluid power - Sealing devices - Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
|
ISO 8339-2005
| 房屋建筑.密封件.拉伸性能的测定(延展至断裂)
| Building construction - Sealants - Determination of tensile properties (Extension to break)
|
ISO 8340-2005
| 房屋建筑.密封件.保持延伸状态时拉伸性能的测定
| Building construction - Sealants - Determination of tensile properties at maintained extension
|
ISO 8394-1988
| 房屋建筑 连接件 单个密封件可挤压性的测定
| Building construction; jointing products; determination of extrudability of one-component sealants
|
ISO 8434-3-2005
| 用于流体传动和一般用途的金属管接头.第3部分:O形圈端面密封管接头
| Metallic tube connections for fluid power and general use - Part 3: O-ring face seal connectors
|
ISO 8639-2000
| 玻璃增强热固性塑料(GRP)管材和管件 柔性连接的密封性试验方法
| Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness of flexible joints
|
ISO 8940-2002
| 航空航天.锚式自锁密封自定位双耳沉孔螺母.级别:900MPa/120℃,900MPa/175℃,C级和900MPa/235℃.尺寸
| Aerospace - Nuts, anchor, self-locking, sealing, floating, two-lug, with counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/120 °C, 900 MPa (at ambient temperature)/175 °C and 900 MPa (at ambient temperature)/235 °C - Dimensions
|
ISO 9046-2002
| 建筑结构.连接产品.恒温下密封剂的粘附和粘结性能的测定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature
|
ISO 9047-2001
| 房屋建筑 连接件 变温下密封粘合性能的测定
| Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures
|
ISO 9048-1987
| 房屋建筑 连接件 标准元件上密封稳定性测定
| Building construction; Jointing products; Determination of extrudability of sealants using standardized apparatus
|
ISO 9222-1-1989
| 技术制图 动密封应用 第1部分:通用简化画法
| Technical drawings; seals for dynamic application; part 1: general simplified representation
|
ISO 9222-2-1989
| 技术制图 动密封应用 第2部分:简化画法
| Technical drawings; seals for dynamic application; part 2: detailed simplified representation
|
ISO 9302-1994
| 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 液压密封验证电磁试验法
| Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness
|
ISO 9392-1989
| 集成软木盘 密封性能
| Agglomerated cork discs; sealing behaviour
|
ISO 9553-1997
| 太阳能 用于集热器橡胶密封件和塑料密封材料的试验方法
| Solar energy - Methods of testing preformed rubber seals and sealing compounds used in collectors
|
ISO 9631-2003
| 橡胶密封件.温度为110℃及以下的热水供给管道用密封圈.材料规范
| Rubber seals - Joint rings for pipelines for hot-water supply up to 110 degrees C - Specification for the material
|
ISO 9691-1992
| 橡胶 管接头的密封件制造工艺的建议 缺陷类型和描述
| Rubber; recommendations for the workmanship of pipe joint rings; description and classification of imperfections
|
ISO 9974-1-1996
| 通用和液压传动用联接件 带ISO 261弹性螺纹或金属-金属密封的气门和双头螺栓端头 第1部分:螺纹气门
| Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports
|
ISO 9974-2-1996
| 通用和液压传动用联接件 带ISO 261弹性螺纹或金属-金属密封的气门和双头螺栓端头 第2部分:弹性密封的双头螺
| Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E)
|
ISO 9974-3-1996
| 通用和液压传动用联接件 带ISO 261弹性螺纹或金属-金属密封的气门和双头螺栓端头 第3部分:金属-金属密封的
| Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B)
|
ISO 9974-4-2006
| 通用和液压传动用联接件.带ISO 261弹性螺纹或金属-金属密封的气门和双头螺栓端头.第4部分:内外六角气门栓的
| Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
|
ISO 9978-1992
| 辐射防护 密封放射源的泄漏检验方法
| Radiation protection; sealed radioactive sources; leakage test methods
|
ISO/PAS 17712-2006
| 货运集装箱.机械密封
| Freight containers - Mechanical seals
|
编号 | 中文名称 | 英文名称 |