| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 3G 148-1981 | 飞行器一般用途的铂温度传感器规范 | Specification for general purpose platinum temperature sensors for aircraft |
| BS 6174-1982 | 电量输出压差传感器规范 | Specification for differential pressure transmitters with electrical outputs |
| BS 6491 Pt.2-1987 | 工业机器的电敏感安全系统.第2部分:(包括光电传感器)电敏感安全系统特殊要求规范 | Electro-sensitive safety systems for industrial machines. Specification for particular requirements for an electro-sensitive safety system incorporating a photoelectric sensing unit(s) |
| BS 6897-1-1987 | 机械机动性的实验测定.第1部分:传感器规范 | Experimental determination of mechanical mobility - Specification for transducers |
| BS 6955-1-1994 | 振动和冲击传感器的校准.采用激光干涉测量法对主振动的校准方法 | Calibration of vibration and shock pick-ups - Methods for primary vibration calibration by laser interferometry |
| BS 6955-10-1994 | 振动和冲击传感器的校准.采用强烈冲击法对主振动的校准方法 | Calibration of vibration and shock pick-ups - Method for primary calibration by high impact shocks |
| BS 6955-11-1994 | 振动和冲击传感器的校准.横向振动灵敏度的试验方法 | Calibration of vibration and shock pick-ups - Method of test for transverse vibration sensitivity |
| BS 6955-12-1994 | 振动和冲击传感器的校准.横向冲击灵敏度的试验方法 | Calibration of vibration and shock pick-ups - Method of test for transverse shock sensitivity |
| BS 6955-13-1994 | 振动和冲击传感器的校准.基本应变灵敏度的试验方法 | Calibration of vibration and shock pick-ups - Method of test for base strain sensitivity |
| BS 6955-14-1994 | 振动和冲击传感器的校准.钢铸锭无阻尼加速度计共振频率的试验方法 | Calibration of vibration and shock pick-ups - Method of test for resonance frequency of undamped accelerometers on a steel block |
| BS 6955-15-1994 | 振动和冲击传感器的校准.声学灵敏度的试验方法 | Calibration of vibration and shock pick-ups - Method of test for acoustic sensitivity |
| BS 6955-16-1994 | 振动和冲击传感器的校准.安装扭矩灵敏度的试验方法 | Calibration of vibration and shock pick-ups - Method of test for mounting torque sensitivity |
| BS 6955-17-1994 | 振动和冲击传感器的校准.固定温度灵敏度的试验方法 | Calibration of vibration and shock pick-ups - Method of test for fixed temperature sensitivity |
| BS 6955-18-1994 | 振动和冲击传感器的校准.瞬变温度灵敏度的试验方法 | Calibration of vibration and shock pick-ups - Method of test for transient temperature sensitivity |
| BS 6955-19-1994 | 振动和冲击传感器的校正.磁场灵敏度的试验方法 | Calibration of vibration and shock pick-ups - Method of test for magnetic field sensitivity |
| BS 6955-1994 | 振动和冲击传感器校准.磁场灵敏度试验方法 | Calibration of vibration and shock pick-ups. Method of test for magnetic field sensitivity |
| BS 6955-2-1994 | 振动和冲击传感器的校准.采用轻切削法对主冲击的校准方法 | Calibration of vibration and shock pick-ups - Methods for primary shock calibration by light cutting |
| BS 6955-22-1997 | 振动和冲击传感器校准.加速度计共振试验.一般方法 | Calibration of vibration and shock pick-ups - Accelerometer resonance testing - General methods |
| BS 6955-5-1994 | 振动和冲击传感器的校准.通过地球引力作用的校准方法 | Calibration of vibration and shock pick-ups - Method for calibration by earth's gravitation |
| BS 6955-6-1994 | 振动和冲击传感器的校准.低频条件下对主振动的校准方法 | Calibration of vibration and shock pick-ups - Method for primary vibration calibration at low frequencies |
| BS 6955-7-1994 | 振动和冲击传感器的校准.通过离心作用的主校准方法 | Calibration of vibration and shock pick-ups - Methods for primary calibration by centrifuge |
| BS 6955-8-1994 | 振动和冲击传感器的校准.通过双离心作用的主校准方法 | Calibration of vibration and shock pick-ups - Method for primary calibration by dual centrifuge |
| BS 6955-9-1994 | 振动和冲击传感器的校准.采用相角比较法对次振动的校准方法 | Calibration of vibration and shock pick-ups - Method for secondary vibration calibration by comparison of phase angles |
| BS 8422-2003 | 力的测量.应变仪负荷传感器系统.校准方法 | Force measurement - Strain gauge load cell systems - Calibration method |
| BS CWA 13449-10-1998 | 金融业务接口规范的扩展.传感器和显示器装置类接口.编程员的参考软件 | Extensions for financial services (XFS) interface specification - Sensors and indicators unit device class interface - Programmer's reference |
| BS CWA 14050-10-2002 | 金融业务(XFS)接口规范的扩展. 3.01版.传感器和指示器设备类接口 | Extensions for financial services (XFS) interface specification - Release 3.01 - Sensors and indicators unit device class interface |
| BS CWA 14050-23-2002 | 金融业务(XFS)接口规范的扩展. 3.01版.传感器和指示器设备类接口.从2.0版(参见 CWA 13449)过渡到3.01版. 程 | Extensions for financial services (XFS) interface specification - Release 3.01 - Sensors and indicators unit device class interface - Migration from version 2.0 (see CWA 13449) to version 3.01 - Programmer's reference |
| BS CWA 14050-37-2007 | 金融业务扩充(XFS)接口规范.3.03版.XFS MIB装置具体定义.传感器和指示器单元装置类接口MIB 1.1 V5 | Extensions for financial services (XFS) interface specification - Release 3.03 - XFS MIB device specific definitions - Sensors and indicators unit device class MIB 1.1 V5 |
| BS EN 13160-4-2003 | 检漏系统.泄漏污染物或填隙空间用液体和/或蒸气传感器系统 | Leak detection systems - Liquid and/or vapour sensor systems for use in leakage containments or interstitial spaces |
| BS EN 13160-6-2003 | 检漏系统.监测井中传感器 | Leak detection systems - Sensors in monitoring wells |
| BS EN 14277-2006 | 建筑物通风.空气终端装置.通过在或接近ATD/充气箱的刻度传感器测量气流的方法 | Ventilation for buildings - Air terminal devices - Method for airflow measurement by calibrated sensors in or close to ATD/plenum boxes |
| BS EN 50123-7-2-2003 | 铁路设施.固定设备.直流开关装置.直流牵引系统专用测量、控制和保护设备.绝缘电流传感器和其他电流测量设备 | Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices |
| BS EN 50123-7-3-2003 | 铁路设施.固定设备.直流开关装置.直流牵引系统专用测量、控制和保护设备.绝缘电压传感器和其他电压测量设备 | Railway applications - Fixed installations - d.c. switchgear - Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices |
| BS EN 50212-1997 | 热电传感器用连接器 | Connectors for thermoelectric sensors |
| BS EN 50227-1999 | 邻近传感器和开关放大器接口用直流控制电路装置和开关元件邻近直流传感器 | Control circuit devices and switching elements proximity sensors , d.c. interface for proximity sensors and switching amplifiers (NAMUR) |
| BS EN 50295-1999 | 低压开关和控制设备.控制器和设备接口系统.传动传感器接口(AS-i) | Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator sensor interface (AS-i) |
| BS EN 60770-2-2003 | 工业过程控制系统用传感器.检验方法和常规试验 | Transmitters for use in industrial-process control systems - Methods for inspection and routine testing |
| BS EN 60947-5-6-2001 | 低压开关设备和控制设备规范.控制电路器件和开关元件.近接传感器和开关放大器用直流接口(NAMUR) | Specification for low-voltage switchgear and controlgear - Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) - DC interface for proximity sensors and switching amplifiers (NAMUR) |
| BS EN 61146-2-1997 | 视频摄影机.测量方法.两个或三个传感器的专业摄影机 | Video cameras (PAL/SECAM/NTSC) - Method of measurement - Two- and three-sensor professional cameras |
| BS EN 61326-2-3-2006 | 测量、控制和实验室用电气设备.电磁兼容性(EMC)要求.专用要求.有综合或遥感信号调制传感器的试验结构、操作 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
| BS EN 61329-1996 | 发声设备.发声器性能规定和测量方法(发声用电解传感器) | Sound system equipment - Methods for measuring and specifying the performance of sounders (electroacoustic transducers for tone production) |
| BS EN 61757-1-1999 | 光纤传感器.总规范 | Fibre optic sensors - Generic specification |
| BS EN ISO 15106-1-2005 | 塑料.薄膜和薄片.水蒸气传输率的测定.湿度探测传感器法 | Plastics - Film and sheeting - Determination of water vapour transmission rate - Humidity detection sensor method |
| BS EN ISO 15106-2-2005 | 塑料.薄膜和薄片.水蒸气传输率的测定.红外探测传感器法 | Plastics - Film and sheeting - Determination of water vapour transmission rate - Infrared detection sensor method |
| BS EN ISO 15106-3-2005 | 塑料.薄膜和薄片.水蒸气传输率的测定.电解探测传感器法 | Plastics - Film and sheeting - Determinaktion of water vapour transmission rate - Electrolytic detection sensor method |
| BS EN ISO 15367-2-2006 | 激光和激光相关设备.激光束波前形状测定试验方法.哈特曼波前传感器 | Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront - Shack-Hartmann sensors |
| BS EN ISO 15839-2004 | 水质.水用联机传感器/分析设备.规范和性能试验 | Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests |
| BS G 240-1988 | 航空用压力传感器规范 | Specification for pressure transducers for use on aircraft |
| BS IEC 60747-14-1-2001 | 分立式半导体器件和集成电路.半导体器件.半导体传感器.总则和分类.传感器总则和半导体传感器分类 | Discrete semiconductor devices and integrated circuits - Semiconductor devices - Semiconductor sensors - General and classification - Sensor generals and classification for semiconductor sensors |
| BS IEC 60747-14-2-2001 | 分立半导体器件和集成电路.半导体器件.半导体传感器.霍尔元件 | Discrete semiconductor devices and integrated circuits - Semiconductor devices - Semiconductor sensors - Hall elements |
| BS IEC 60747-14-3-2001 | 分立半导体器件和集成电路.半导体器件.半导体传感器.压力传感器 | Discrete semiconductor devices and integrated circuits - Semiconductor devices - Semiconductor sensors - Pressure sensors |
| BS IEC 61520-2001 | 温度计传感器用金属套管.功能尺寸 | Metal thermowells for thermometer sensors - Functional dimension |
| BS ISO 11786-1995 | 农用拖拉机和农业机械.拖拉机安装的传感器界面.规范 | Agricultural tractors and machinery - Tractor mounted sensor interface - Specification |
| BS ISO 15839-2004 | 水质.水用联机传感器/分析设备.规范和性能试验 | Water quality - On-line sensors/analysing equipment for water - Specifications and performance tests |
| BS ISO 16063-1-1999 | 振动和冲击传感器的校准方法.第1部分:基本概念 | Methods for the calibration of vibration and shock transducers - Basic concepts |
| BS ISO 16063-11-2001 | 振动和冲击传感器的校准方法.采用激光干涉量度法的主要振动校准 | Methods for the calibration of vibration and shock transducers - Primary vibration calibration by laser interferometry |
| BS ISO 16063-12-2002 | 校准振动和冲击传感器的方法.用往复式方法进行初级振动校准 | Methods for the calibration of vibration and shock transducers - Primary vibration calibration by the reciprocity method |
| BS ISO 16063-13-2002 | 振动和冲击传感器的校准方法.采用激光干涉测量法的主要冲击校准 | Methods for the calibration of vibration and shock transducers - Primary shock calibration using laser interferometry |
| BS ISO 16063-15-2006 | 振动和冲击传感器的校准方法.用激光干涉测量法进行初级振动角校准 | Methods for the calibration of vibration and shock transducers - Primary angular vibration calibration by laser interferometry |
| BS ISO 16063-21-2003 | 振动和冲击传感器的校准方法.与基准传感器比对进行振动校准 | Methods for the calibration of vibration and shock transducers - Vibration calibration by comparison to a reference transducer |
| BS ISO 16063-22-2005 | 振动和冲击传感器的校准方法.与基准传感器进行比对的冲击校准 | Methods for the calibration of vibration and shock transducers - Shock calibration by comparison to a reference transducer |
| BS ISO 22896-2006 | 道路车辆.安全系统部署和客车装备传感器 | Road vehicles - Deployment and sensor bus for occupant safety systems |
| CWA 13449-10-1998 | 金融服务扩展程序（XFS）接口规范 第10部分：传感器和显示器设备类接口 程序员接口 | Extensions for Financial Services (XFS) interface specification - Part 10: Sensors and Indicators Unit Device Class Interface - Programmers Interface |
| CWA 13449-10-1998 | 金融服务扩展程序（XFS）接口规范 第10部分：传感器和显示器设备类接口 程序员接口 | Extensions for Financial Services (XFS) interface specification - Part 10: Sensors and Indicators Unit Device Class Interface - Programmers Interface |
| CWA 13937-8-2000 | Java平台金融业务用J/eXtensions(J/XFS).传感器和指示装置类别接口.程序员参考文件 | J/eXtensions for financial service (J/XFS) for the Java platform. Sensors and indicators unit device class interface. Programmer's reference |
| CWA 13937-8-2003 | Java平台上的J金融服务扩展程序(J/XFS) 第8部分：传感器和指示器设备类接口 程序员参考手册 | J/eXtensions for Financial Service (J/XFS) for the Java Platform - Part 8: Sensors and Indicators Unit Device Class Interface; Programmers Reference |
| CWA 14050-10-2000 | 金融业务接口规范的范围.3.0版.传感器和显示器设备装置类别接口 | Extensions for financial services (XFS) interface specification. Release 3.0. Sensors and indicators unit device class interface |
| CWA 14050-10-2002 | 金融服务扩展程序（XFS）接口规范 3.01版 第10部分：传感器和指示器设备类接口 | Extensions for Financial Services (XFS) interface specification - Release 3.01 - Part 10: Sensors and Indicators Unit Device Class Interface |
| CWA 14050-23-2000 | 金融业务接口规范的范围.3.0版.传感器和指示器设备装置类别接口.从2.0版升级到3.0版（见CWA 13449）.程序员 | Extensions for financial services (XFS) interface specification. Release 3.0. Sensors and indicators unit device class interface. Migration from version 2.0 (see CWA 13449) to version 3.0. Programmer's reference |
| CWA 14050-23-2002 | 金融服务扩展程序（XFS）接口规范 3.0版 第23部分：传感器和指示器设备类接口 从2.0版（见CWA 13449）升 | Extensions for Financial Services (XFS) interface specification - Release 3.01 - Part 23: Sensors and Indicators Unit Device Class Interface; Migration from Version 2.0 (see CWA 13449) to Version 3.01 (this CWA); Programmers Reference |
| 编号 | 中文名称 | 英文名称 |