| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 1363-1-1995 | 13 A 插头、插座和适配器.可重接和不可重接带熔断器底插头规范 | 13 A plugs, socket-outlets, adaptors and connection units - Specification for rewirable and non-rewirable 13 A fused plugs |
| BS 1363-2-1995 | 13 A 插头、插座和适配器.13 A 有开关和无开关插座规范 | 13 A plugs, socket-outlets, adaptors and connection units - Specification for 13 A switched and unswitched socket-outlets |
| BS 1363-3-1995 | 13 A 插头、插座和适配器.适配器规范 | 13 A plugs, socket-outlets, adaptors and connection units - Specification for adaptors |
| BS 1363-4-1995 | 13A 插头、插座和适配器.第4部分:13A 熔断连接组件开关设备规范 | 13 A plugs, socket-outlets, adaptors and connection units - Specification for 13 A fused connection units switched and unswitched |
| BS 196-1961 | 电压达250V单相交流电路用带接地线的保护式不可反转插头、插座电缆藕合器与设备藕合器规范 | Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase a.c. circuits up to 250 volts |
| BS 3101-1986 | 主要用于煤矿与防爆式限动插头插座联用的控制电路和联锁电路规范 | Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines |
| BS 4573-1970 | 两销可换向的插头和剃须刀输出插座规范 | Specification for 2-pin reversible plugs and shaver socket-outlets |
| BS 5125-1990 | 煤矿用50A 650V阻燃、保险和螺栓连接插头和插座规范 | Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines |
| BS 546 Supplement No. 1-1960 | 两极和接地销插头、插座和插座适配器规范.补充件1:弹性材料插头规范 | Specification for plugs made of resilient material |
| BS 546-1950 | 规范.两极和接地插针插头、插座和插座底壳 | Specification - Two-pole and earthing-pin plugs, socket-outlets and socket-outlet adaptors |
| BS 5550-7.5.4-1981 | 电影技术.第7部分:制片与放映.第 5节:电影和电视场地照明.第4小节:单极高电流插头和插座连接器规范 | Cinematography - Production and presentation - Film and television location lighting - Specification for single pole high current plugs and socket connectors |
| BS 5620-1995 | 矿山用1100V、200A安全防火与螺栓连接的插头与插座规范 | Specification for 200 A 1100 V flameproof restrained and bolted plugs and sockets for use in coal mines |
| BS 6312-2.1-1996 | 模拟电信接口连接器.第2部分:符合BS 6312 Pt.1专用插头插座.第1节:插座规范.一般要求 | Connectors for analogue telecommunication interfaces - Sockets for use with plugs specified in BS 6312:Part 1: Specification for sockets - General requirements |
| BS 6312-2.2-1997 | 模拟电信接口用连接器.与BS 6312第1部分:永久接线设备用固定电气插座的特殊要求中规定的插头配套使用的插座 | Connectors for analogue telecommunication interfaces - Sockets for use with plugs specified in BS 6312-1: Particular requirements for fixed socket-outlets used in permanent wiring installations |
| BS 7288-1990 | 插座插入剩余电流设备(S.R.C.D.S)规范 | Specification for socket outlets incorporating residual current devices (S.R.C.D.s) |
| BS 91-1998 | 电缆焊接插座.规范 | Electric cable soldering sockets - Specification |
| BS 9526 N0001-1978 | 多触点边缘插座电气连接器详细规范.单面或双面、闭端、可替换触点、穿板焊接或线绕终端.全面评估级 | Detail specification for multi-contact edge socket electrical connectors - Single or double sided, closed ended, replaceable contacts, through-board solder or wire wrap terminations - Full assessment level |
| BS 9526 N0002-1979 | 多触点边缘插座电气连接器详细规范.单面或双面、开式端、金属固定法兰、 导键定位、可替换触点、穿板焊接或 | Detail specification for multi-contact edge socket electrical connectors - Single or double sided, open ended, metal fixing flanges , guide key location, replaceable contacts, through-board solder or wire wrap terminations - Full assessment level |
| BS 9526 N0003-1979 | 多触点边缘插座插接器详细规范.单面或双面、开式端、导键定位、可替换触点、穿板焊接或线绕终端.全面评估级 | Detail specification for multi-contact edge socket electrical connectors - Single or double sided, open ended, guide key location, replaceable contacts, through-board solder or wire wrap terminations - Full assessment level |
| BS CECC 75101-1984 | 电子元器件用质量评估协调体系.实例详细规范/空白详细规范.印制电路板用二件式和边缘插座连结器 | Specification for harmonized system of quality assessment for electronic components - Example detail specification/blank detail specification - Two-part and edge socket connectors for printed board application |
| BS DD ISO/TS 21108-2006 | 手持式动力工具.脉冲扳手.电插座接口的尺寸和公差 | Hand-held power tools - Impulse wrenches - Dimensions and tolerances of interface to power socket |
| BS EN 14638-1-2006 | 可运输的气瓶.容量＜150升的可再充气焊接插座.用实验方法证明设计制成的焊接奥氏体不锈钢气瓶 | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
| BS EN 147000-1995 | 电子元器件质量评定协调体系.通用规范.经过质量评定的继电器插座 | Harmonized system of quality assessment for electronic components - Generic specification - Sockets for use with electrical relays of assessed quality |
| BS EN 147100-1995 | 电子元器件质量评定协调体系.分规范:经过质量评定的继电器插座 | Harmonized system of quality assessment for electronic components - Sectional specification: relay sockets of assessed quality |
| BS EN 147101-1995 | 电子元器件质量评定协调体系规范.评估质量继电器插座空白详细规范 | Specification for harmonized system of quality assessment for electronic components - Blank detail specification: relay sockets of assessed quality |
| BS EN 15207-2006 | 危险物品运输罐.危险区域中用24V标称电源电压设备用插头/插座连接和电源特征 | Tanks for transport of dangerous goods — Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
| BS EN 175100-1993 | 电子元器件质量评定协调体系.部分规范.印刷电路板用双件式印制板插座 | Harmonized system of quality assessment for electronic components - Sectional specification - Two part and edge socket connectors for printed board applications |
| BS EN 2997-003-2006 | 航空航天系列.连续工作温度为-65℃到175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 003: Square flange receptacle - Product standard |
| BS EN 2997-004-2006 | 航空航天系列.连续工作温度为-65℃到175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard |
| BS EN 2997-005-2006 | 航空航天系列.连续工作温度为-65℃到175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 005: Hermetic square flange receptacle - Product standard |
| BS EN 2997-006-2006 | 航空航天系列.连续工作温度为-65℃到175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard |
| BS EN 2997-007-2006 | 航空航天系列.连续工作温度为-65℃到175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 007: Hermetic receptacle with round flange attached by welding or brazing - Product standard |
| BS EN 2997-011-2006 | 航空航天系列.连续工作温度为-65℃到175℃、持续到200℃、极端温度为260℃时耐火或不耐火的由螺纹环连接的 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous , 260 °C peak - Part 011: Dummy receptacle - Product standard |
| BS EN 3155-003-2005 | 航空航天系列.连接部件中用电连接器.第003部分: S级、压紧、A型电连接器插座.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, type A, crimp, class S. Product standard |
| BS EN 3155-005-2006 | 航天航天系列.连接部件中用电连接器.T级、压紧、A型电连接器插座.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard |
| BS EN 3155-009-2006 | 航空航天系列.用于连接部件的电接触器.第009部分:S级、压褶、A型电接触器插座的产品标准 | Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S. Product standard |
| BS EN 3155-015-2006 | 航空航天系列.连接部件用电连结器.第015部分:A型、压接、S级插座电连结器.产品标准 | Aerospace series — Electrical contacts used in elements of connection — Part 015: Contacts, electrical, female, type A, crimp, class S — Product standard |
| BS EN 3155-019-2005 | 航空航天系列.连接部件中用电连接器.第019部分: S级、压紧、A型电连接器插座.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, type A, crimp, class S. Product standard |
| BS EN 3155-023-2006 | 航空航天系列.连接部件中用电连接器.第023部分: R级、压紧、A型电连接器矩形插座.产品标准 | Electrical contacts used in elements of connection - Part 023: Contacts, electrical, rectangular, female, type A, crimp , class R. Product standard |
| BS EN 3155-025-2006 | 航空航天系列.用于连接部件的电接触器.第025部分:S级、压褶、D型、尺寸为8、三轴电接触器插座的产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S. Product standard |
| BS EN 3155-027-2006 | 航空航天系列.连接部件中用电连接器.第027部分:R级、压紧、A型电连接器插座.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R. Product standard |
| BS EN 3155-031-2006 | 航空航天系列.部件连接用电触点.第031部分:R级、压接、D型、插座、尺寸12的同轴屏蔽电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 031: Contacts, electrical, coaxial, shielded, size 12, female, type D, crimp, class R - Product standard |
| BS EN 3155-035-2006 | 航空航天系列.部件连接用电触点.第035部分:R级、压接、D型、插座、尺寸08、三轴电接点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 035: Contacts, electrical, triaxial, size 08, female, type D, crimp, class R - Product standard |
| BS EN 3155-043-2006 | 航空航天系列.连接部件中用电连接器.第043部分:P级、焊接、D型、043插座、尺寸08mm三轴电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 043: Contacts, electrical, triaxial, size 08, female 043, type D, solder, class P - Product standard |
| BS EN 3155-045-2006 | 航空航天系列.连接部件中用电连接器.第045部分:T级、双压紧、A型插座电连接器.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 045: Contacts, electrical, female, type A, double crimping, class T - Product standard |
| BS EN 3155-055-2006 | 航空航天系列.部件连接用电触点.T级、压接、C型、NiAl热电偶插座电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, thermocouple NiAl, type C, crimp, class T. Product standard |
| BS EN 3155-057-2006 | 航空航天系列.部件连接用电触点.T级、压接、C型、NiCr热电偶插座电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, thermocouple NiCr, type C, crimp, class T. Product standard |
| BS EN 3155-059-2006 | 航空航天系列.部件连接用电触点.第059部分:R级、钎焊、D型、插座、尺寸16的同轴电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard |
| BS EN 3155-061-2006 | 航空航天系列.部件连接用电触点.R级、钎焊、D型、插座、尺寸12、屏蔽、同轴、电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, coaxial, shielded, size 12, female , type D, solder, class R. Product standard |
| BS EN 3155-066-2006 | 航空航天系列.部件连接用电触点.尺寸8、S级、压接、A型、插座电触点.产品标准 | Aerospace series - Electrical contacts used in elements of connection - Contacts, electrical, female, type A, crimp, class S, size 8. Product standard |
| BS EN 3372-003-2007 | 航空航天系列.工作温度在-65°C到175°C或200°C连续温度下、带卡口连接的、防碰擦、中和高接触密度、圆形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Square flange receptacle - Product standard |
| BS EN 3372-005-2007 | 航空航天系列.工作温度在-65°C到175°C或200°C连续温度下、带卡口连接的、防碰擦、中和高接触密度、圆形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, hermetic, round flange, solder mounting - Product standard |
| BS EN 3372-006-2007 | 航空航天系列.工作温度在-65°C到175°C或200°C连续温度下、带卡口连接的、防碰擦、中和高接触密度、圆形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Protective cover for receptacle - Product standard |
| BS EN 3372-009-2007 | 航空航天系列.工作温度在-65°C到175°C或200°C连续温度下、带卡口连接的、防碰擦、中和高接触密度、圆形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Receptacle, jam nut mounting - Product standard |
| BS EN 3372-011-2007 | 航空航天系列.工作温度在-65°C到175°C或200°C连续温度下、带卡口连接的、防碰擦、中和高接触密度、圆形 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Dummy receptacle - Product standard |
| BS EN 3645-003-2006 | 航空航天系列连续操作温度175℃或 200℃、圆形防穴式、3层起动螺纹联接电连接器.第003部分:方形法兰安装插 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 003: Receptacle square flange mounting — Product standard |
| BS EN 3645-004-2006 | 航空航天系列连续操作温度175℃或 200℃、圆形防穴式、3层起动螺纹联接电连接器.第004部分:方形法兰密封插 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 004: Receptacle, hermetic, square flange mounting — Product standard |
| BS EN 3645-005-2006 | 航空航天系列连续操作温度175℃或 200℃、圆形防穴式、3层起动螺纹联接电连接器.第005部分:brasage 安装圆 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 005: Receptacle, hermetic, round flange, brasage mounting — Product standard |
| BS EN 3645-006-2006 | 航空航天系列连续操作温度175℃或 200℃、圆形防穴式、3层起动螺纹联接电连接器.第006部分:插座保护盖.产品 | Aerospace series — Connectors, electrical, circular, scoop-proof,triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 006: Protective cover for receptacle — Product standard |
| BS EN 3645-009-2006 | 航空航天系列连续操作温度175℃或 200℃、圆形防穴式、3层起动螺纹联接电连接器.第009部分:防松螺母安装圆 | Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 009: Receptacle, round flange, jam nut mounting — Product standard |
| BS EN 3645-010-2006 | 航空航天系列连续操作温度175℃或 200℃、圆形防穴式、3层起动螺纹联接电连接器.第010部分:防松螺母安装圆 | Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 010: Receptacle, hermetic, round flange, jam nut mounting — Product standard |
| BS EN 3645-013-2007 | 航空航天系列.连续操作温度175℃或200℃、3层起动螺纹联接、防碰擦、圆形电连接器.虚拟插座.产品标准 | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Dummy receptacle - Product standard |
| BS EN 3646-003-2006 | 航空航天系列.175℃～200℃工作温度圆形卡口耦合电器连接件.第003部分:方形法兰安装插座.产品标准. | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 003: Receptacle, square flange mounting - Product standard |
| BS EN 3646-005-2006 | 航空航天系列.175℃～200℃工作温度圆形卡口耦合电连接器.第005部分:方形法兰安装密封插座.产品标准 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 005: Receptacle, hermetic, square flange mounting - Product standard |
| BS EN 3646-006-2006 | 航空航天系列.175℃～200℃工作温度圆形卡口耦合电器连器.第006部分:锁紧螺母安装密封插座.产品标准 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 006: Receptacle, hermetic jam-nut mounting - Product standard |
| BS EN 3646-007-2006 | 航空航天系列.175℃～200℃温度工作的圆形卡口耦合电连接器.第007部分:圆形法兰密封焊接或铜焊接的密封插座 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ℃ or 200 ℃ continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mounting - Product standard |
| BS EN 3682-001-2006 | 航空航天系列.连续工作温度150℃、装在板上可互换插入式矩形电插头和插座连接器.技术规范 | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Technical specification |
| BS EN 3682-002-2006 | 航空航天系列.150℃连续工作温度、机架到面板、可互换插入式、矩形的插头与插座连接器.第002部分:性能和接 | Aerospace series — Connectors, plug and receptacle, electrical,rectangular, interchangeable insert type, rack to panel, operatingtemperature 150 °C continuous — Part 002: Specification of performance and contact arrangements |
| BS EN 3682-004-2006 | 航空航天系列.150 ℃连续工作温度、支架式到板式可互换插入式矩形插头和插座电连接器.尺寸2插座.产品标准 | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 004: Size 2 receptacle - Product standard |
| BS EN 3682-005-2006 | 航空航天系列.150℃连续工作温度、机架到面板、可互换插入式、矩形的插头与插座连接器.尺寸2插头.产品标准 | Aerospace Series - Connectors, plug and receptacle, electrical ,rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 005: Size 2 plug - Product standard |
| BS EN 3682-006-2006 | 航空航天系列.150 ℃连续工作温度、支架式到板式可互换插入式矩形插头和插座电连接器.第006部分:尺寸3插座. | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 006: Size 3 receptacle - Product standard |
| BS EN 3682-008-2006 | 航空航天系列.150 ℃连续工作温度、支架式到板式可互换插入式矩形插头和插座电连接器.第008部分:尺寸4插座. | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 008: Size 4 receptacle - Product standard |
| BS EN 3682-009-2006 | 航空航天系列.连续工作温度150 ℃支架式到板式可互换插入式矩形插头和插座电连接器.尺寸4插头.产品标准 | Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 009: Size 4 plug - Product standard |
| BS EN 3716-005-2006 | 航空航天系列.数字传输用三极接口单路连接器.第005部分:压接插座.产品标准 | Aerospace series — Connector, single-way with triaxial interface,for transmission of digital data — Part 005: Crimp receptacle — Product standard |
| BS EN 4165-012-2005 | 航空航天系列.矩形模块电连接器.连续工作温度为175℃.第012部分:系列3模块2和4的法兰安装插座.产品标准 | Connectors, electrical, rectangular, modular - Operating temperature 175 ℃ continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series 3 - Product standard |
| BS EN 60169-23-1994 | 射频连接器.外导体内径为3.5mm(0.1378in)3.5mm精密同轴线路用插针和插座连接器 | Radio-frequency connectors - Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in) |
| BS EN 60309-1-1999 | 工业用插头、插座输出口和耦合器.一般要求 | Plugs, socket-outlets and couplers for industrial purposes - General requirements |
| BS EN 60309-2-1999 | 工业用插头、插座输出口和耦合器.管脚和接触导管附件尺寸互换性要求 | Plugs, socket-outlets and couplers for industrial purposes - Dimensional interchangeability requirements for pin and contact-tube accessories |
| BS EN 60309-4-2007 | 工业用插头、插座端口和连接件.有或没有互锁的开关插座端口和连接器 | Plugs, socket-outlets and couplers for industrial purposes - Switched socket-outlets and connectors, with or without interlock |
| BS EN 60526-2005 | 医用X射线设备高压电缆插头和插座的连接 | High-voltage cable plug and socket connections for medical X-ray equipment |
| BS EN 60603-12-1998 | 印制板用频率低于3MHz的连接器.设计用于集成电路的插座系列尺寸、一般要求和试验的详细规范 | Connectors for frequencies below 3 MHz for use with printed boards - Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
| BS EN 60603-5-1998 | 印制板用频率低于3MHz的连接器.有2·54mm(0·10in)间距为2.54mm的双面印制板插座和两件连接器 | Connectors for frequencies below 3 MHz for use with printed boards - Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 mm) spacing |
| BS EN 60603-6-1998 | 印制板用频率低于3MHz的连接器.标称厚度1.6mm(0.063in)的单面或双面印制板用间隔距离为2·54mm(0·1in)插座 | Connectors for frequencies below 3 MHz for use with printed boards - Edge-socket connectors and printed board connectors with 2 ,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness |
| BS EN 61076-2-102-2002 | 电子设备连接器.圆形连接器.质量评定的圆形连接器.室外低电源用插头和插座的详细规范 | Connectors for electronic equipment - Circular connectors - Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply |
| BS EN 61076-5-2001 | 直流低频率模拟及高速数据数字设备用连接器.经过质量评定的串联插座.分规范 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - In-line sockets with assessed quality - Sectional specification |
| BS EN 61754-4-1-2003 | 光纤连接器接口.SC型连接器系列.简易SC-PC插座连接器接口 | Fibre optic connector interfaces - Type SC connector family - Simplified receptacle SC-PC connector interfaces |
| BS EN 61754-6-1-2003 | 光纤连接器接口.MU型连接器系列.简易MU-PC插座连接器接口 | Fibre optic connector interfaces - Type MU connector family - Simplified receptacle MU-PC connector interfaces |
| BS EN 62196-1-2004 | 电气机车输入端和机车连接器用插头和插座.电气机车传导冲电.250A交流和400A直流及以下的电气机车充电 | Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Charging of electric vehicles up to 250 A a.c. and 400 A d.c |
| BS G 175-1959 | 航空用燃油嘴接地插头和插座 | Aircraft fuel nozzle grounding plugs and sockets |
| BS IEC 796-3-1991 | 微处理机系统8位和16位数据多路总线Ⅰ.具有插脚和插座连接器(间接式)的欧洲卡配置用机械和插脚描述 | Microprocessor system bus - 8-bit and 16-bit data MULTIBUS I. Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors |
| BS PAS 003-1994 | 有塑料插座开起杆的不可再布线的13A插头 | Non-rewireable 13 A plugs with plastic socket shutter opening pins |
| 编号 | 中文名称 | 英文名称 |