法国插座标准(NF socket standards)

ANSI |  BS |  DIN |  EN |  GB |  IEC |  JIS |  NF |  DIC
编号 中文名称 英文名称
NF C61-305-1981 家用和类似用途的电器附件.木制踢脚板和木框用10/16A、250V插座口 (Electrical accessories for domestic and similar purposes. 10/16 amperes 250 volts socket-outlets for wood baseboards and frames.)
NF C61-314-2003 家用和类似用途插头和插座.6A/250V和16A/250V系统 (Plugs and socket-outlets for household and similar purposes - 6 A / 250 V and 16 A / 250 V systems.)
NF C61-320-1981 额定电流为6A额定电压为250V的可移式插座和插脚.规则 (Electrical accessories for domestic and similar purposes. Plugs and socket-outlets and cable couplers rated 6 amperes and 250 volts.)
NF C63-300-1999 工业用插头、插座和接线板.第5部分:一般要求 (Plugs, socket-outlets and couplers for industrial purposes. Part 1 : general requirements.)
NF C63-310-1999 工业用插头、插座和接线板.第2部分:对触针和连接管附件尺寸的可互换性一要求 (Plugs, socket-outlets and couplers for industrial purposes - Part 2 : dimensional interchangeability requirements for pin and contact-tube accessories.)
NF C93-406-2-102-2002 电子设备连接器.第2-102部分:经质量评定的圆形连接器.外部低电压电源用插头和插座的分规范 (Connectors for electronic equipment - Part 2-102 : circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply.)
NF C93-406-5-2002 直流低频模拟及数字高速数据应用系统用连接器. 第5部分:具有质量评定的在线插座.分规范 (Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5 : in-line sockets with assessed quality - Sectional specification.)
NF C93-424-1982 电子元件.连接元件.A型插入式印刷电路板多触点接头及其相应的HE8型节距为1·27mm的插座.一般规定 (Electronic components. Connecting devices. Board mounted printed circuits connectors with contact and termination spacing of 1,27 mm. Type HE 8. General requirements.)
NF C93-427-1983 电子元件.连接元件.集成电路和其它插入元件用插座.SC型 (ELECTRONIC COMPONENTS.CONNECTING DEVICES SOCKETS FOR INTEGRATED CIRCUIT AND OTHERS PLUG-IN COMPONENTS. GENERAL REQUIREMENTS.)
NF C93-428-1981 电子元件. 连接元件.与纱包电缆自动剥离间距为1·27mm的A型多触点插入式接头及其垂直距离为2·54mm (ELECTRONIC COMPONENTS. CONNECTING DEVICES. INSULATION DISPLACEMENT CONNECTORS. TYPE HE 10. GENERAL REQUIREMENTS.)
NF C93-430-12-1998 用于印制板的频率低于3MHZ的连接件.第12部分:尺寸的详细规范.用于集成电路的插座设计范围内的试验和一般要 (Connectors for frequencies below 3 MHz for use with printed boards. Part 12 : detail specification for dimensions, general requirements and tests for a range of socket designed for use with integrated circuits.)
NF C93-903-39-1998 纤维光学互联装置和无源元件.基本试验和测量过程.第3-39部分:试验,检验和测量.PC-光学连接器参考插座的选择 (Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-39 : tests. Examinations and measurements. PC optical connector reference plug selection.)
NF C93-909-051-3-2002 纤维光学内连接器件和无源元件性能标准.第051-3部分:U类用单膜光纤和插座式固定衰减器.非环境控制 (Fibre optic interconnecting devices and passive components performance standard - Part 051-3 : single-mode fibre, plug-style fixed attenuators for category U - Uncontrolled environment.)
NF F50-009-1993 铁路固定设备.绝缘固定插座 (Railway fixed equipment. Isolating fermale fixing insert.)
NF L54-111-1966 飞行器电气设备.常规用途插座.(RECH.) (ELECTRICAL EQUIPMENT FOR AIRCRAFT. GENERAL PURPOSE SOCKETS. (RECH.).)
NF L54-115-1966 飞行器电气设备.小型插座.(RECH.) (ELECTRICAL EQUIPMENT FOR AIRCRAFT. SMALL SOCKETS. (RECH.).)
NF L54-120-1966 飞行器电气设备.轻型插座.型号4 (ELECTRICAL EQUIPMENT FOR AIRCRAFT. LIGHTWEIGHT SOCKETS. TYPE 4.)
NF L54-510-1966 飞行器电气设备.20MM插头的机场插座.(RECH.) (ELECTRICAL EQUIPMENT FOR AIRCRAFT. AERODROME SOCKETS WITH 20 MM PINS. (RECH.).)
NF L54-520-1966 飞行器电气设备.14MM插头的机场插座.(RECH.) (ELECTRICAL EQUIPMENT FOR AIRCRAFT. AERODROME SOCKETS WITH 14 MM PINS. (RECH.).)
NF L54-560-1966 飞行器电气设备.115v直流用11MM插头的机场插座.(RECH.) (ELECTRICAL EQUIPMENT FOR AIRCRAFT. AERODROME SOCKETS WITH 11 MM PINS FOR 115 VOLTS DIRECT CURRENT. (RECH.).)
NF L94-111-1975 飞机地面注油管喷嘴的插头和插座 (Aircraft . Fuel nozzle grounding plugs and sockets.)
NF S76-024-2-1999 呼吸保护装置.气瓶阀.插座接头 (RESPIRATORY PROTECTIVE DEVICES. GAS CYLINDER VALVES. PART 2 : OUTLET CONNECTIONS. (EUROPEAN STANDARD EN 144-2).)
NF S95-111-1997 麻醉及呼吸设备.圆锥形连接器.第1部分:锥形头和插座 (Anaesthetic and respiratory equipment. Conical connectors. Part 1 : cones and sockets.)
NF T54-054-1997 塑料管道系统.未增塑聚氯乙烯端点负载轴承双插座连接件.当弯曲和受到内压时测定其防漏性和强度的试验方法 (Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure.)
编号 中文名称 英文名称

返回