| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 4950-1973 | 工程用喷涂和熔融金属度层规范 | Specification for sprayed and fused metal coatings for engineering purposes |
| BS 5241-1-1994 | 建筑工地涂覆或喷涂用硬质聚氯酯泡沫塑料.第1部分:外部施覆的隔热泡沫塑料 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site - Specification for sprayed foam thermal insulation applied externally |
| BS 5241-2-1991 | 施工现场配制与喷涂用硬聚氨酯和聚异三聚氰脲酸酯泡沫塑料.第2部分:绝热或弹性配制泡沫塑料的规范 | Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site - Specification for dispensed foam for thermal insulation or buoyancy applications |
| BS 7021-1989 | 采用喷涂刚性聚氨基甲酸乙酯和聚异三聚氰脲酸酯泡沫对屋顶外部进行隔热的实用规程 | Code of practice for thermal insulation of roofs externally by means of sprayed rigid polyurethane (PUR) or polyisocyanurate (PIR) foam |
| BS 7335-2-1991 | 整体耐火材料的安装.喷涂式安装实用规程 | Installation of monolithic refractories - Code of practice for installation by gunning |
| BS 8202-1-1995 | 建筑构件的防火涂层.无机物喷涂的选择与设置实用规程 | Coatings for fire protection of building elements - Code of practice for the selection and installation of sprayed mineral coatings |
| BS 8216-1991 | 建筑物用隔热和吸声喷涂轻质矿物涂层实用规程 | Code of practice for use of sprayed lightweight mineral coatings used for thermal insulation and sound absorption in buildings |
| BS EN 1274-2005 | 热喷涂.粉末.成分、交货技术条件 | Thermal spraying - Powders - Composition, technical supply conditions |
| BS EN 12981-2005 | 涂层设备.喷涂有机粉末涂层材料的喷涂室.安全要求 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| BS EN 13214-2001 | 热喷涂.热喷涂协调.任务和责任 | Thermal spraying - Thermal spray coordination - Tasks and responsibilities |
| BS EN 13507-2001 | 热喷涂.热喷涂元件和金属零部件表面预处理 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
| BS EN 1395-1-2007 | 热喷涂.热喷涂设备的验收检验.一般要求 | Thermal spraying - Acceptance inspection of thermal spraying equipment - General requirements |
| BS EN 1395-1996 | 热喷涂.热喷涂设备的验收检验 | Thermal spraying - Acceptance inspection of thermal spraying equipment |
| BS EN 1395-2-2007 | 热喷涂.热喷涂设备的验收检验.包括超音速火焰喷涂(HVOF)的火焰喷涂 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Flame spraying including HVOF |
| BS EN 1395-3-2007 | 热喷涂.热喷涂设备的验收检验.电弧喷涂 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Arc spraying |
| BS EN 1395-4-2007 | 热喷涂.热喷涂设备的验收检验.等离子喷涂 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Plasma spraying |
| BS EN 1395-5-2007 | 热喷涂.热喷涂设备的验收检验.室内等离子喷涂 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Plasma spraying in chambers |
| BS EN 1395-6-2007 | 热喷涂.热喷涂设备的验收检验.操作装置 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Manipulator systems |
| BS EN 1395-7-2007 | 热喷涂.热喷涂设备的验收检验.粉末配送系统 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Powder feed system |
| BS EN 13966-1-2003 | 液态涂层材料用雾化及喷涂设备输送效率的测定.平板条 | Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Flat panels |
| BS EN 14616-2005 | 热喷涂.热喷涂的推荐 | Thermal spraying - Recommendations for thermal spraying |
| BS EN 14665-2005 | 热喷涂.热喷涂覆层.图纸上的符号表示 | Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings |
| BS EN 15311-2007 | 热喷涂.热喷覆层元部件.技术供货条件 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
| BS EN 15339-2-2007 | 热喷涂.热喷涂设备的安全要求.气体控制部件 | Thermal spraying - Safety requirements for thermal spraying equipment - Gas control units |
| BS EN 15340-2007 | 热喷涂.热喷涂层耐剪切负荷的测定 | Thermal spraying - Determination of shear load resistance of thermally sprayed coatings |
| BS EN 15520-2007 | 热喷涂.热喷覆层组件结构设计的推荐实施规程 | Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings |
| BS EN 50050-2006 | 潜在爆炸环境用电气设备.手持式静电喷涂设备 | Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
| BS EN 50059-1991 | 涂漆及抛光用不易燃材料手持静电喷涂设备规范 | Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing |
| BS EN 50176-1997 | 易燃液体喷涂材料用自动静电喷涂装置 | Automatic electrostatic spraying installations for flammable liquid spraying material |
| BS EN 50177-1997 | 易燃喷涂粉末用自动静电喷涂装置 | Automatic electrostatic spraying installations for flammable coating powder |
| BS EN 50177-2006 | 易燃喷涂粉末用自动静电喷涂设备 | Automatic electrostatic spraying equipment for flammable coating powder |
| BS EN 582-1994 | 热喷涂层的试验.抗拉胶粘强度的测定 | Thermal spraying - Determination of tensile adhesive strength |
| BS EN 657-2005 | 热喷涂.术语和分类 | Thermal spraying - Terminology, classification |
| BS EN ISO 14918-1998 | 热喷涂.热喷涂人员资格测试 | Thermal spraying - Approval testing of thermal sprayers |
| BS EN ISO 14919-2001 | 热喷涂.熔喷和电弧喷涂用线材、杆材和软线.分类.技术支持条件 | Thermal spraying, Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions |
| BS EN ISO 14920-1999 | 热喷涂.自熔合金的熔化和喷涂 | Thermal spraying - Spraying and fusing of self-fluxing alloys |
| BS EN ISO 14921-2001 | 热喷涂.工程元件的热喷涂应用方法 | Thermal spraying - Procedure for the application of thermally sprayed coatings for engineering components |
| BS EN ISO 14922-1-1999 | 热喷涂.热喷涂结构件的质量要求.选择和使用导则 | Thermal spraying - Quality requirements of thermally sprayed structures - Guidance for selection and use |
| BS EN ISO 14922-2-1999 | 热喷涂.热喷涂结构件的质量要求.综合质量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Comprehensive quality requirements |
| BS EN ISO 14922-3-1999 | 热喷涂.热喷涂结构件的质量要求.标准质量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Standard quality requirements |
| BS EN ISO 14922-4-1999 | 热喷涂.热喷涂结构件的质量要求.基本质量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Elementary quality requirements |
| BS EN ISO 14924-2005 | 热喷涂.热喷涂覆层的后处理和精加工 | Thermal spraying - Post-treatment and finishing of thermally sprayed coatings |
| BS EN ISO 17834-2003 | 热喷涂.高温腐蚀和氧化防护涂层 | Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures |
| BS EN ISO 17836-2004 | 热喷涂.沉积效率的测定 | Thermal spraying - Determination of the deposition efficiency |
| BS EN ISO 8028-2000 | 无空气涂料喷涂用塑料和/或橡胶软管组件.规范 | Rubber and/or plastics hose assemblies for airless paint spraying - Specification |
| BS ISO 15643-2002 | 道路建设和维修设备.沥青粘合剂摊铺机/喷涂机.术语和商业规范 | Road construction and maintenance equipment - Bituminous binder spreaders/sprayers - Terminology and commercial specifications |
| 编号 | 中文名称 | 英文名称 |