| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| EN 10288-2002 | 岸上和海上管路钢管及配件 外表两层喷涂聚乙烯底化 | Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings |
| EN 1274-1996 | 热喷涂 粉末、成份、交货技术条件 | Thermal spraying - Powders - Composition - Technical supply conditions |
| EN 13214-2001 | 热喷涂 热喷涂协作 任务和责任 | Thermal spraying - Thermal spray coordination - Tasks and responsibilities |
| EN 1395-1996 | 热喷涂 热喷涂设备的验收检验 | Thermal spraying - Acceptance inspection of thermal spraying equipment |
| EN 1953-1998 | 涂覆材料的雾化和喷涂设备 安全要求 | Atomising and spraying equipment for coating materials - Safety requirements |
| EN 465-1995+A1-1998 | 防护服 液态化学品防护 服装不同部分间喷涂密封连接的化学品防护服的性能要求（4型设备） | Protective clothing - Protection against liquid chemicals - Performance requirements for chemical protective clothing with spray-tight connections between different parts of the clothing (Type 4 equipment) |
| EN 50053-1-1987 | 使用易燃喷涂材料的静电喷涂器的选择、安装和使用要求 第1部分：能量极限为0.24mJ的手持静电喷漆枪及有关 | Requirements for the selection, installation and use of electrostatic spraying equipment for flammable spraying materials - Part 1: Hand-held electrostatic paint spray guns with an energy limit of O.24 mJ and their associated apparatus |
| EN 50053-2-1989 | 使用易燃材料的静电喷涂器的选择、安装和使用要求 第2部分：能量极限为5mJ的手持静电喷粉枪及有关装置 | Requirements for the selection, installation and use of electrostatic spraying equipment for flammable materials - part 2: Hand-held electrostatic powder spray guns with an energy limit of 5 mJ and their associated apparatus |
| EN 50053-3-1989 | 使用易燃材料的静电喷涂器的选择、安装和使用要求 第3部分：能量极限为0.24mJ 或5mJ的手持静电纤维填料喷 | Requirements for the selection, installation and use of electrostatic spraying equipment for flammable materials - Part 3: Hand - held electrostatic flock spray guns with an energy limit of 0,24 mJ or 5 mJ and their associated apparatus |
| EN 50059-1990 | 涂漆和饰面用不可燃材料手持静电喷涂设备规范 | Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing |
| EN 50176-1996 | 易燃液体喷涂材料用自动静电喷涂装置 | Automatic electrostatic spraying installations for flammable liquid spraying material |
| EN 50177-1996 | 易燃喷涂粉末用自动静电喷涂装置 | Automatic electrostatic spraying installations for flammable coating powder |
| EN 582-1993 | 热喷涂层 抗拉粘附强度的测定 | Thermal spraying; determination of tensile adhesive strength |
| EN ISO 14918-1998 | 热喷涂 热喷涂人员的资格考查 | Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998) |
| EN ISO 14919-2001 | 热喷涂 火焰喷涂和电弧喷涂用金属丝、条及软线 分类 技术交货条件 | Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification; Technical supply conditions (ISO 14919:2001) |
| EN ISO 14920-1999 | 热喷涂 自熔合金的喷涂及重熔 | Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:1999) |
| EN ISO 14921-2001 | 热喷涂 工程元件用热喷涂料的应用程序 | Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2001) |
| EN ISO 14922-1-1999 | 热喷涂 热喷涂结构的质量要求 第1部分：选择和应用指南 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use (ISO 14922-1:1999) |
| EN ISO 14922-2-1999 | 热喷涂 热喷涂结构的质量要求 第2部分：全面质量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999) |
| EN ISO 14922-3-1999 | 热喷涂 热喷涂结构的质量要求 第3部分：标准质量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999) |
| EN ISO 14922-4-1999 | 热喷涂 热喷涂结构的质量要求 第4部分：基本质量要求 | Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999) |
| EN ISO 14923-2003 | 热喷涂 热喷涂涂料的性能与试验 | Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO/FDIS 14923:2002) |
| EN ISO 8028-2000 | 真空喷涂漆用橡胶和／或塑料软管和软管组件 规范 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999) |
| prEN 10285-1996 | 岸上和海上管路用钢管及配件 外部三层喷涂聚乙烯底化 | Steel tubes and fittings for on and offshore pipelines - External three layer extruded polyethylene based coatings |
| prEN 10286-1996 | 岸上和海上管路用钢管及配件 外表三层喷涂聚丙烯底化 | Steel tubes and fittings for on and offshore pipelines - External three layer extruded polypropylene based coatings |
| prEN ISO 14924-2002 | 热喷涂 热喷涂层的后处理及终饰 | Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO/DIS 14924:2002) |
| prEN ISO 17834-2003 | 热喷涂 高温时防腐蚀及防氧化的保护涂料 | Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO/FDIS 17834:2003) |
| prEN ISO 17836-2002 | 热喷涂沉积效率的测定 | Determination of the deposition efficiency for thermal spaying (ISO/DIS 17836:2002) |
| 编号 | 中文名称 | 英文名称 |