| 编号 | 中文名称 | 英文名称 |
|---|
| BS 1600-1991
| 石油工业用钢管尺寸规范
| Specification for dimensions of steel pipe for the petroleum industry
|
| BS 1640-1-1962
| 石油工业用钢对焊管管件规范.第1部分:锻制碳钢与铁素体合金钢管件
| Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought carbon and ferritic alloy steel fittings
|
| BS 1640-4-1968
| 石油工业用钢对焊管管件规范.第4部分:锻造和铸造奥氏体铬镍钢管件:米制单位
| Specification for steel butt-welding pipe fittings for the petroleum industry - Wrought and cast austenitic chromium-nickel steel fittings - Metric units
|
| BS 1717-1983
| 自行车和摩托车用钢管规范
| Specification for steel tubes for cycle and motor cycle purposes
|
| BS 2633-1987
| 输送流体用铁素体钢管道工程的一级电弧焊规范
| Specification for Class I arc welding of ferritic steel pipework for carrying fluids
|
| BS 2971-1991
| 输送流体用碳钢管道二级电弧焊规范
| Specification for class II arc welding of carbon steel pipework for carrying fluids
|
| BS 2T 57-1972
| 4/1镍-铬钢管材规范(1150 N/mm<上标2>)
| Specification for 4/1 nickel-chromium steel tube (1150 N/mm2)
|
| BS 2T 66-1980
| 19/10铬-镍耐腐蚀钢管材规范(铌稳定的:550MPa)(可焊接)
| Specification for 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 550 MPa) (weldable)
|
| BS 2T 68-1980
| 冷拉18/10铬-镍耐腐蚀钢管材规范(铌稳定的:800MPa)(可焊接)
| Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (niobium stabilized: 800 MPa) (weldable)
|
| BS 3293-1960
| 石油工业用碳素钢管法兰(标称尺寸24英寸以上)规范
| Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry
|
| BS 3604-2-1991
| 承压钢管.具有规定高温特性的铁合金钢.第2部分:纵向电弧焊接管规范
| Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties - Specification for longitudinally arc welded tubes
|
| BS 3799-1974
| 石油工业用钢管配件、螺旋管接头和套管焊接规范
| Specification for steel pipe fittings, screwed and socket-welding for the petroleum industry
|
| BS 3868-1995
| 预制排水用镀锌钢管件规范
| Specification for prefabricated drainage stack units in galvanized steel
|
| BS 3T 53-1980
| 铬-钼钢管材规范(700MPa)(管外径不小于12.5mm)(可焊接)
| Specification for chromium-molybdenum steel tube (700 MPa) (outside diameter not less than 12.5 mm) (weldable)
|
| BS 3T 60-1980
| 铬-钼钢管材规范(1150MPa)(最大厚度8mm）
| Specification for chromium-molybdenum steel tube (1150 MPa) (maximum thickness 8 mm)
|
| BS 4204-1989
| 承压钢管的闪光焊规范
| Specification for flash welding of steel tubes for pressure applications
|
| BS 4515-1-2004
| 陆地和近海钢管道焊接规范.碳及碳锰钢管
| Specification for welding of steel pipelines on land and offshore - Carbon and carbon manganese steel pipelines
|
| BS 4515-2-1999
| 陆地和近海铺设的钢管焊接规范.双联法不锈钢管道
| Specification for welding of steel pipelines on land and offshore - Duplex stainless steel pipelines
|
| BS 4677-1984
| 输送液体用奥氏体不锈钢管件的电弧焊规范
| Specification for arc welding of austenitic stainless steel pipework for carrying fluids
|
| BS 4825-1-1991
| 食品工业及其他卫生设施用不锈钢管及接头.第1部分:管规范
| Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for tubes
|
| BS 4825-2-1991
| 食品工业及其他卫生设施用不锈钢管及接头.第2部分:弯头和三通规范
| Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for bends and tees
|
| BS 4825-3-1991
| 食品工业及其他卫生设施用不锈钢管及配件.夹紧型连接件规范
| Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for clamp type couplings
|
| BS 4825-4-1991
| 食品工业及其他卫生设施用不锈钢管及接头.第4部分:螺纹(IDF型)管接头规范
| Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for threaded (IDF type) coupling
|
| BS 4825-5-1991
| 食品工业及其他卫生设施用不锈钢管及接头.第5部分:凹环形连接管接头规范
| Stainless steel tubes and fittings for the food industry and other hygienic applications - Specification for recessed ring joint type couplings
|
| BS 4T 100-1997
| 无缝钢管和管材的检验、试验和验收程序
| Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock
|
| BS 4T 45-1972
| 碳-锰钢管材规格(700 N/mm<上标2>)(管外径大于或等于12.5mm)(可焊接)
| Specification for carbon-manganese steel tube (700 N/mm2) (tube 12.5 mm outside diameter and greater) (weldable)
|
| BS 5242-1-1987
| 液压动力流体气缸筒用管材.第1部分:特别精加工表面的钢管规范
| Tubes for fluid power cylinder barrels - Specification for steel tubes with specially finished surfaces
|
| BS 5383-1986
| 采用连续字符标记法的钢镍合金及钛合金管材标志与钢管颜色编码规范
| Specification for material identification of steel, nickel alloy and titanium alloy tubes by continuous character marking and colour coding of steel tubes
|
| BS 5482-1-2005
| 家用丁烷和丙烷燃气装置的操作规程.永久性住宅、居住区公园和商业化处所中的钢管尺寸不超过DN25和波纹不锈
| Code of practice for domestic butane- and propane-gas-burning installations - Installations at permanent dwellings, residential park homes and commercial premises, with installation pipework sizes not exceeding DN 25 for steel and DN 28 for corrugated stainless steel or copper
|
| BS 5S 100-1993
| 锻钢制品(钢板、薄钢板、钢带和钢管除外)检验、试验和验收程序
| Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube)
|
| BS 5T 2-1972
| 4/1镍-铬钢管材规范(1300 N/mm<上标2>)
| Specification for 4/1 nickel-chromium steel tube (1300 N/mm2)
|
| BS 6362-1990
| 按BS21 "带压密接合螺纹接头的管及配件管螺纹" 攻丝的不锈钢管规范
| Specification for stainless steel tubes suitable for screwing in accordance with BS 21 'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads'
|
| BS 6990-1989
| 含有工艺流体或其残留物的钢管焊接实用规程
| Code of practice for welding on steel pipes containing process fluids or their residuals
|
| BS 7416-1991
| 液压动力系统用精密无缝冷拔低碳钢管规范
| Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems
|
| BS 778-1966
| 液压用钢管与接头规范
| Specification for steel pipes and joints for hydraulic purposes
|
| BS 7873-1996
| 铁管和钢管热搪瓷和/或内度层应用和试验实用规程
| Code of practice for application and testing of hot enamel external and/or internal coating of iron and steel pipes
|
| BS 879-1-1985
| 水井套管.第1部分:井套管用钢管规范
| Water well casing - Specification for steel tubes for casing
|
| BS EN 10208-1-1998
| 可燃性液体管路用钢管.技术交货条件.A级要求管
| Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Pipes of requirement class A
|
| BS EN 10208-2-1997
| 可燃流体用钢管.技术交付条件.B级管要求
| Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Pipes of requirement class B
|
| BS EN 10216-1-2002
| 承压用的无缝钢管.交付技术状态.规定了室温特性的非合金钢管
| Seamless steel tubes for pressure purposes - Technical delivery conditions
|
| BS EN 10216-2-2002
| 承压用的无缝钢管.交付技术状态.规定了高温特性的非合金和合金钢管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Non-alloy and alloy steel tubes with specified elevated temperature properties
|
| BS EN 10216-3-2002
| 承压用的无缝钢管.交付技术状态.合金细晶粒钢管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes
|
| BS EN 10216-4-2002
| 承压用的无缝钢管.交付技术状态.规定了低温特性的非合金和合金钢管
| Seamless steel tubes for pressure purposes - Technical delivery conditions
|
| BS EN 10216-5-2004
| 压力无缝钢管.交货技术条件.无缝钢管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Stainless steel tubes
|
| BS EN 10217-1-2002
| 承压用焊接钢管.交付技术状态.规定室温特性的非合金钢管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature properties
|
| BS EN 10217-2-2002
| 承压用的焊接钢管.交付技术状态.规定了高温特性的非合金和合金电焊钢管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
|
| BS EN 10217-3-2002
| 承压用的焊接钢管.交付技术状态.合金细晶粒钢管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Alloy fine grain steel tubes
|
| BS EN 10217-4-2002
| 承压用的焊接钢管.交付技术状态.规定了低温特性的非合金和合金电焊钢管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Electric welded non-alloy steel tubes with specified low temperature properties
|
| BS EN 10217-5-2002
| 承压用的焊接钢管.交付技术状态.规定了高温特性的非合金和合金埋弧焊接钢管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
|
| BS EN 10217-6-2002
| 承压用的焊接钢管.交付技术条件.规定了低温特性的非合金埋弧焊接钢管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Submerged arc welded non-alloy steel tubes with specified low temperature properties
|
| BS EN 10217-7-2005
| 压力用途焊接钢管.交货技术条件.不锈钢管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Stainless steel tubes
|
| BS EN 10220-2002
| 无缝和焊接钢管.尺寸和每单位长度的质量
| Seamless and welded steel tubes - Dimensions and masses per unit length
|
| BS EN 10224-2002
| 包括生活用水在内的含水液的输送用非合金钢管和配件.交货技术条件
| Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions
|
| BS EN 10240-1998
| 钢管内外保护覆层.用于自动化车间的热浸镀锌规范
| Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
|
| BS EN 10241-2000
| 螺纹钢管配件
| Steel threaded pipe fittings
|
| BS EN 10246-1-1996
| 钢管的无损检验.证明液压系统密封性用无缝和焊接铁磁钢管(埋弧焊除外)的自动电磁检验
| Non-destructive testing of steel tubes - Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
|
| BS EN 10246-10-2000
| 钢管无损检验.缺陷探测用自动熔融电弧焊钢管焊缝的射线检验
| Non-destructive testing of steel tubes - Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
|
| BS EN 10246-11-2000
| 钢管的无损检验.对无缝和焊接钢管进行液体渗透试验以检测其表面缺陷
| Non-destructive testing of steel tubes - Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
|
| BS EN 10246-12-2000
| 钢管的无损检验.对无缝和焊接铁磁钢管进行磁粉检验以检测其表面缺陷
| Non-destructive testing of steel tubes - Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
|
| BS EN 10246-13-2000
| 钢管的无损检验.无缝和焊接钢管(埋弧焊除外)的全外围自动超声波厚度检测
| Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes
|
| BS EN 10246-14-2000
| 钢管的无损检验.层状缺陷探测用无缝和焊接(埋弧焊接除外)钢管的自动超声波检验
| Non-destructive testing of steel tubes - Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
|
| BS EN 10246-15-2000
| 钢管的无损检验.无缝和焊接钢管(埋弧焊除外)的全外围自动超声波厚度检测
| Non-destructive testing of steel tubes - Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
|
| BS EN 10246-16-2000
| 钢管的无损检验.对焊接钢管焊缝临近区域进行自动超声波检验以检测其层状缺陷
| Non-destructive testing of steel tubes - Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
|
| BS EN 10246-17-2000
| 钢管的无损检验.对无缝和焊接钢管管端部进行超声波检验以检测其层状缺陷
| Non-destructive testing of steel tubes - Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections
|
| BS EN 10246-18-2000
| 钢管的无损检验.对无缝和焊接铁磁钢管管端部进行磁粉检验以检测其层状缺陷
| Non-destructive testing of steel tubes - Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections
|
| BS EN 10246-2-2000
| 钢管的无损检验.验证水密封性能用的无缝和焊接的(埋弧焊除外)奥氏体铁素体钢管的自动涡流试验
| Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
|
| BS EN 10246-3-2000
| 钢管的无损检验.缺陷探测用无缝和焊接(埋弧焊除外)钢管的自动涡流检验
| Non-destructive testing of steel tubes - Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
|
| BS EN 10246-4-2000
| 钢管的无损检验.横向缺陷探测用无缝铁磁性钢管的自动全周界磁力换能器/磁力线渗漏检验
| Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections
|
| BS EN 10246-5-2000
| 钢管的无损检验.纵向缺陷探测用无缝和焊接(埋弧焊除外)的铁磁性钢管的自动全周界磁力换能器/磁力线渗漏检验
| Non-destructive testing of steel tubes - Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
|
| BS EN 10246-6-2000
| 钢管的无损检验.横向缺陷探测用无缝钢管的自动全周界超声波检验
| Non-destructive testing of steel tubes - Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
|
| BS EN 10246-7-2005
| 钢管的无损检验.纵向缺陷探测用无缝焊接钢管(埋弧焊除外)的自动全周界超声波检验
| Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections
|
| BS EN 10246-8-2000
| 钢管的无损试验.纵向缺陷探测用电焊钢管焊缝的自动超声波检验
| Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
|
| BS EN 10246-9-2000
| 钢管的无损检验.检测纵向或横向缺陷用的焊接和埋弧焊钢管的自动超声波试验
| Non-destructive testing of steel tubes - Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
|
| BS EN 10255-2004
| 焊接或加螺纹的非合金钢管.交货技术条件
| Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions
|
| BS EN 10256-2000
| 钢管无损检验.1级和2级无损检验师的资质及能力
| Non-destructive testing on steel tubes - Qualification and competence of level 1 and level 2 non-destructive testing personnel
|
| BS EN 10266-2003
| 钢管、配件和结构空心型材.产品标准中术语的符号和定义
| Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
|
| BS EN 10288-2002
| 岸上和近海管道用钢管及配件.外部的双层挤压聚乙烯基涂层
| Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings
|
| BS EN 10289-2002
| 岸上和近海管道用钢管和配件.外用液体涂刷的环氧涂料及环氧改性的涂料
| Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
|
| BS EN 10290-2002
| 岸上和近海输油管用钢管和配件.用于外部液体的聚氨酯和改性聚氨酯脂涂层
| Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings
|
| BS EN 10296-1-2003
| 机械和一般工程用焊接圆钢管.技术交货条件.非合金和合金钢管
| Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes
|
| BS EN 10296-2-2005
| 机械和一般工程用焊接圆钢管.技术交货条件.不锈钢
| Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Stainless steel
|
| BS EN 10297-1-2003
| 机械和普通工程用无缝圆形钢管.技术交货条件.非合金和合金钢管
| Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Non-alloy and alloy steel tubes
|
| BS EN 10297-2-2005
| 机械和一般工程用无缝圆钢管.技术交货条件.不锈钢
| Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Stainless steel
|
| BS EN 10298-2005
| 岸上和海底管路用钢管和管件.水泥灰浆内衬
| Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar
|
| BS EN 10300-2005
| 近岸和海上管道用钢管和配件.外涂层用沥青热涂覆材料
| Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating
|
| BS EN 10301-2003
| 岸上及海底管道用钢管及配件.非腐蚀性气体的输送用减少摩擦的内涂层
| Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
|
| BS EN 10305-1-2002
| 精密仪器用钢管.交货技术条件.无缝冷拔钢管
| Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes
|
| BS EN 10305-2-2002
| 精密仪器用钢管.交货技术条件.焊接冷拔钢管
| Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes
|
| BS EN 10305-3-2002
| 精密仪器用钢管.交货技术条件.焊接冷精加工钢管
| Steel tubes for precision applications - Technical delivery conditions - Welded cold sized tubes
|
| BS EN 10305-4-2003
| 精密仪器用钢管.技术交货条件.液压和气动系统用无缝冷拉管
| Steel tubes for precision applications - Technical delivery conditions - Seamless cold drawn tubes for hydraulic and pneumatic power systems
|
| BS EN 10305-5-2003
| 精密设备用钢管.交货技术条件.焊接和冷精加工的方形及矩形钢管
| Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubes
|
| BS EN 10305-6-2005
| 精密仪器用钢管.交货技术条件.液压和气动动力系统用焊接冷拉管材
| Steel tubes for precision applications - Technical delivery conditions - Welded cold drawn tubes for hydraulic and pneumatic power systems
|
| BS EN 10310-2004
| 岸上和海底管路用钢管和配件.聚酰胺粉末基内外涂层
| Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
|
| BS EN 10311-2005
| 水和其他含水液体传送用钢管和配件的连接用接头
| Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
|
| BS EN 10312-2003
| 包括人生活用水在内的水成液输送用焊接不锈钢管.交货技术条件
| Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption - Technical delivery conditions
|
| BS EN 10329-2006
| 海上或离岸管道用钢管和管件.外部连接包覆层
| Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings
|
| BS EN 10339-2007
| 陆上和海上输水管道用钢管.防腐蚀用内部液体环氧衬里
| Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection
|
| BS EN 1123-1-1999
| 污水系统用插接管的纵向焊接热浸镀锌钢管及配件.要求、试验和质量控制
| Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control
|
| BS EN 1123-2-2006
| 废水系统用带龙头和插接套管的纵向焊接热浸镀锌钢管的管道和管件.第2部分:尺寸
| Pipes and fittings of longitudinally welded hot-dip galvanized steeltube with spigot and socket for waste water systems — Part 2: Dimensions
|
| BS EN 1123-3-2004
| 污水系统用带插接套的纵向焊接热浸镀锌钢管及配件.真空排水系统以及造船用排水系统的尺寸和特殊要求
| Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
|
| BS EN 1124-1-1999
| 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.要求、测试和质量控制
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Requirements, testing, quality control
|
| BS EN 1124-2-1999
| 废水系统用插接式纵向焊接不锈钢管道和配件.系统5.尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System S. Dimensions
|
| BS EN 1124-3-1999
| 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.系统X、尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - System X; dimensions
|
| BS EN 1124-4-2005
| 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.真空排水系统和船上排水系统用部件
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems — Part 4: Components for vacuum drainage systems and for drainage systems on ships
|
| BS EN 12068-1999
| 阴极保护.埋于地下的或浸于水中的钢管外部防腐有机涂层.磁带和可缩材料
| Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
|
| BS EN 12732-2000
| 供气系统.焊接钢管.功能要求
| Gas supply systems - Welding steel pipework - Functional requirements
|
| BS EN 253-2003
| 区域供暖管道.直埋式热水供应网用预先绝热包覆的管道系统.聚氨基甲酸乙酯热绝缘和聚乙烯外覆层的钢管用组件
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
|
| BS EN 39-2001
| 管及联结脚手架用空心钢管.交货技术条件
| Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions
|
| BS EN 448-2003
| 区域供暖管道.直埋式热水供应网用预先绝热包覆的管道系统.聚氨基甲酸乙酯热绝缘和聚乙烯外覆层钢管用成套配
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
|
| BS EN 488-2003
| 区域供暖管道.直埋式热水供应网用预先绝热包覆的管道系统.聚氨基甲酸乙酯热绝缘和聚乙烯外覆层钢管用钢阀门
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
|
| BS EN 489-2003
| 区域供暖管道.直埋式热水管网用预先绝热有包覆管层的管道系统.聚氨基甲酸乙酯热绝缘和聚乙烯外覆层的钢管用
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
|
| BS EN ISO 11120-1999
| 气瓶.1501升-30001升水容量的可再填充的无缝钢管.设计,结构和试验
| Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150l and 3000l - Design, construction and testing
|
| BS EN ISO 1127-1997
| 不锈钢管.尺寸、公差和单位长度的常规质量
| Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length
|
| BS EN ISO 11960-2005
| 石油和天然气工业.油井套管或油管用钢管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
|
| BS EN ISO 11961-1997
| 石油和天然气工业.钻探管用钢管.规范
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification
|
| BS EN ISO 13680-2002
| 石油和天然气工业.用作套管、油管和接箍的防腐合金无缝钢管.交货技术条件
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
|
| BS EN ISO 9455-12-1994
| 软钎焊剂.试验方法.钢管耐腐蚀试验
| Soft soldering fluxes - Test methods - Steel tube corrosion test
|
| BS ISO 15741-2002
| 油漆和清漆.岸上和近海铺设的无腐蚀气体钢管道内侧的减小摩擦涂层
| Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
|
| BS ISO 16172-2006
| 波纹钢管用连续热浸金属涂层钢板
| Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
|
| BS ISO 8535-1-2006
| 柴油发动机.高压注射燃油管道用钢管.无缝冷拔单壁管要求
| Diesel engines - Steel tubes for high-pressure fuel injection pipes - Requirements for seamless cold-drawn single-wall tubes
|
| BS ISO 8535-2-2004
| 压燃式发动机.高压燃油喷管用钢管.合成管的要求
| Compression ignition engines - Steel tubes for high pressure fuel injection pipes - Requirements for composite tubes
|
| BS T 64-1972
| 碳-锰钢管材规范(550 N/mm<上标2>)(管外径小于12.5mm)(可焊接)
| Specification for carbon-manganese steel tube (550 N/mm2) (tube less than 12.5 mm outside diameter) (weldable)
|
| BS T 67-1972
| 18/10铬-镍耐腐蚀钢管材规范(钛稳定的:550 N/mm<上标2>)(可焊接)
| Specification for 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 550 N/mm2) (weldable)
|
| BS T 69-1972
| 冷拉18/10铬-镍耐腐蚀钢管材规范(钛稳定的:800 N/mm<上标2>)(可焊接)
| Specification for cold drawn 18/10 chromium-nickel corrosion-resisting steel tube (titanium stabilized: 800 N/mm2) (weldable)
|
| BS T 72-T 73-1977
| 液压用18/10铬-镍耐腐蚀钢管规范(铌/钛稳定;550MPa)
| Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa)
|
| BS T 74-1972
| 低碳18/10铬-镍耐腐蚀钢管规范(550牛顿/平方毫米)
| Specification for low carbon 18/10 chromium-nickel corrosion-resisting steel tube (500 N/mm2)
|
| BS T 75-1972
| 低碳17/12铬-镍-钼耐腐蚀钢管规范(550牛顿/平方毫米)
| Specification for low carbon 17/12 chromium-nickel-molybdenum corrosion-resisting steel tube (500 N/mm2)
|
| BS T 76-1978
| 铬-钼钢管规范(770MPa)(可焊接)
| Specification for chromium-molybdenum steel tube (770 MPa) (weldable)
|
| BS T 77-1980
| 铬-钼钢管材规范(900MPa)(可焊接)
| Specification for chromium-molybdenum steel tube (900 MPa) (weldable)
|
| BS T 78-1997
| 2<1/2>%镍-铬-钼钢管规范(1390Mpa)
| Specification for 21/2% nickel-chromium-molybdenum steel tubes (1390 Mpa)
|
| BS T 79-1997
| 2<1/2>%镍-铬-钼钢管规范(1160Mpa)
| Specification for 21/2% nickel-chromium-molybdenum steel tubes (1160 MPa)
|
| BS T 80-1997
| 12%铬耐腐蚀钢管规范(770Mpa)
| Specification for 12% chromium corrosion-resisting steel tubes (770 MPa)
|
| DD ENV 10220-1994
| 无缝钢管和焊接钢管.尺寸及单位长度质量
| Seamless and welded steel tubes. Dimensions and masses per unit length
|
| KIT 159-2004
| 钢管技术交付条件汇编
| Steel tubes technical delivery conditions kit
|
| 编号 | 中文名称 | 英文名称 |
|---|