| 编号 | 中文名称 | 英文名称 |
|---|
| ISO 10124-1994
| 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 层状缺陷检测用超声检验
| Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections
|
| ISO 10332-1994
| 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 验证液压防泄漏用超声波检验
| Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; ultrasonic testing for verification of hydraulic leak-tightness
|
| ISO 10543-1993
| 压力用无缝及热拉伸焊接钢管 全周边超声波厚度检测
| Seamless and hot-stretch-reduced welded steel tubes for pressure purposes; full peripheral ultrasonic thickness testing
|
| ISO 10763-1994
| 液压传动 端面平齐的无缝和焊接型精密钢管 尺寸及标称工作压力
| Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures
|
| ISO 11120-1999
| 气瓶 150升～3000升水容量的可重复充装无缝钢管气瓶 设计、结构和试验
| Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing
|
| ISO 1127-1992
| 不锈钢管 尺寸、公差和单位长度的公称质量
| Stainless steel tubes; dimensions, tolerances and conventional masses per unit length
|
| ISO 1129-1980
| 锅炉、过热器和热交换器用钢管 尺寸、公差和单位常用重量
| Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length
|
| ISO 11484-1994
| 压力用途钢管 无损检验人员的资格及认证
| Steel tubes for pressure purposes - Qualification and certification of non-destructive testing (NDT) personnel
|
| ISO 11496-1993
| 压力用途的承压无缝和焊接钢管 层间不完整性检查的管端超声波检测
| Seamless and welded steel tubes for pressure purposes; ultrasonic testing of tube ends for the detection of laminar imperfections
|
| ISO 11960 Technical Corrigendum 1-2006
| 石油和天然气工业.油井套管或油管用钢管.技术勘误1
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells; Technical Corrigendum 1
|
| ISO 11960-2004
| 石油和天然气工业.油井套管和油管用钢管
| Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
|
| ISO 11961-1996
| 石油和天然气工业 钻井杆用钢管 规范
| Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification
|
| ISO 12094-1994
| 压力用途的承压焊接钢管 焊接钢管用钢带/钢板分层缺陷检测用超声波试验
| Welded steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes
|
| ISO 12095-1994
| 压力用途的承压无缝和焊接钢管 液体渗透试验
| Seamless and welded steel tubes for pressure purposes - Liquid penetrant testing
|
| ISO 12096-1996
| 压力用途的承压埋弧焊接钢管 焊缝缺陷检测用X射线检查
| Submerged arc-welded steel tubes for pressure purposes - Radiographic testing of the weld seam for the detection of imperfections
|
| ISO 13663-1995
| 压力用途的承压焊接钢管 焊缝周围分层缺陷检测用超声波试验
| Welded steel tubes for pressure purposes - Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
|
| ISO 13664-1997
| 压力用途的承压无缝和焊接钢管 管端分层组织缺陷探测用磁粉检验
| Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube ends for the detection of laminar imperfections
|
| ISO 13665-1997
| 压力用途的承压无缝和焊接钢管 管身表面缺陷探测用磁粉检验
| Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections
|
| ISO 13680 Technical Corrigendum 2-2004
| 石油和天然气工业.用作套管、油管和接箍的防腐合金无缝钢管.交货技术条件.技术勘误2
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions; Technical Corrigendum 2
|
| ISO 13680-2000
| 石油和天然气工业 用作套管、油管和接箍的防腐合金无缝钢管交货技术条件
| Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions
|
| ISO 15741-2001
| 色漆和清漆 海上和近海的非腐蚀气体钢管内侧的减小摩擦涂层
| Paints and varnishes - Friction-reduction coatings for the interior of on- and offshore pipelines for non-corrosive gases
|
| ISO 16172-2006
| 波纹钢管用连续热浸金属涂层钢板
| Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
|
| ISO 2037-1992
| 食品工业用不锈钢管
| Stainless steel tubes for the industry
|
| ISO 2937-1974
| 机械用光端无缝钢管
| Plain end seamless steel tubes for mechanical application
|
| ISO 3183-2007
| 石油和天然气工业.管道运输系统用钢管
| Petroleum and natural gas industries - Steel pipe for pipeline transportation systems
|
| ISO 3183-3 Technical Corrigendum 1-2000
| 石油和天然气工业.管道钢管.交货技术条件.第3部分:C级钢管的要求.技术勘误1
| Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 3: Pipes of requirement class C; Technical Corrigendum 1
|
| ISO 3304-1985
| 光端精密无缝钢管 交货技术条件
| Plain end seamless precision steel tubes; Technical conditions for delivery
|
| ISO 3305-1985
| 光端焊接精密钢管 交货技术条件
| Plain end welded precision steel tubes; Technical conditions for delivery
|
| ISO 3306-1985
| 焊后定径光端精密钢管 交货技术条件
| Plain end as-welded and sized precision steel tubes; Technical conditions for delivery
|
| ISO 3545-1-1989
| 钢管和管件 规范中使用的符号 第1部分:圆形截面的管和管状附件
| Steel tubes and fittings; symbols for use in specifications; part 1: tubes and tubular accessories with circular cross-section
|
| ISO 3545-2-1989
| 钢管和管件 规范中使用的符号 第2部分:正方形和矩形中空截面
| Steel tubes and fittings; symbols for use in specifications; part 2: square and rectangular hollow sections
|
| ISO 3545-3-1989
| 钢管和管件 规范中使用的符号 第3部分:圆形截面管件
| Steel tubes and fittings; symbols for use in specifications; part 3: tubular fittings with circular cross-section
|
| ISO 4200-1991
| 光端焊接和无缝钢管 管的尺寸和单位长度重量的一览表
| Plain end steel tubes, welded and seamless; general tables of dimensions and masses per unit length
|
| ISO 4394-1-1980
| 流体传动系统和元件.缸筒.第1部分:对特殊精加工内径的钢管的要求
| Fluid power systems and components-- Cylinder barrels; Part 1 : Requirements for steel tubes with specially finished bores
|
| ISO 5252-1991
| 钢管 公差系列
| Steel tubes; tolerance systems
|
| ISO 5256-1985
| 地下或水下管路用钢管和管件 管内外涂沥青或沥青油衍生物
| Steel pipes and fittings for buried or submerged pipe lines; External and internal coating by bitumen or coal tar derived materials
|
| ISO 5625-1978
| 造船 钢管管路法兰焊接通舱管 PN6、PN10和PN16
| Shipbuilding; Welded bulkhead pieces with flanges for steel pipework; PN 6, PN 10 and PN 16
|
| ISO 65-1981
| 按照ISO 7/1 车螺纹的碳素钢管
| Carbon steel tubes suitable for screwing in accordance with ISO 7/1
|
| ISO 6758-1980
| 热交换器用焊接钢管
| Welded steel tubes for heat exchangers
|
| ISO 6759-1980
| 热交换器用无缝钢管
| Seamless steel tubes for heat exchangers
|
| ISO 6761-1981
| 钢管 焊接用管端和配件的预处理
| Steel tubes; Preparation of ends of tubes and fittings for welding
|
| ISO 7598-1988
| 适于按照ISO 7/1车螺纹用不锈钢管
| Stainless steel tubes suitable for screwing in accordance with ISO 7-1
|
| ISO 8535-1-2006
| 柴油发动机.高压喷射燃油管用钢管.第1部分:无缝冷拉制单壁钢管的要求
| Diesel engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes
|
| ISO 8535-2-2003
| 压燃式发动机.高压燃油喷管用钢管.第2部分:组合管的要求
| Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 2: Requirements for composite tubes |
| ISO 9095-1990
| 钢管 鉴别材料用连续符号标志和颜色码
| Steel tubes; continuous character marking and colour coding for material identification
|
| ISO 9302-1994
| 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 液压密封验证电磁试验法
| Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness
|
| ISO 9303-1989
| 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测纵向缺陷用全周边超声波试验
| Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of longitudinal imperfections
|
| ISO 9304-1989
| 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测缺陷用涡流电流试验
| Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; eddy current testing for the detection of imperfections
|
| ISO 9305-1989
| 压力用途的无缝钢管 横向缺陷全周边超声电流检验
| Seamless steel tubes for pressure purposes; full peripheral ultrasonic testing for the detection of transverse imperfections
|
| ISO 9329-1-1989
| 压力用途的无缝钢管 交货技术条件 第1部分:规定室温性能的非合金钢
| Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steels with specified room temperature properties
|
| ISO 9329-2-1997
| 压力用途的无缝钢管 交货技术条件 第2部分:规定高温性能的非合金钢和合金钢
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
|
| ISO 9329-3-1997
| 压力用途的无缝钢管 交货技术条件 第3部分:规定低温性能的非合金钢和合金钢
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Unalloyed and alloyed steels with specified low temperature properties
|
| ISO 9329-4-1997
| 压力用途的无缝钢管 交货技术条件 第4部分:奥氏体不锈钢
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels
|
| ISO 9330-1-1990
| 压力用途的焊接钢管 交货技术条件 第1部分:规定室温性能的非合金钢管
| Welded steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steel tubes with specified room temperatures properties
|
| ISO 9330-2-1997
| 压力用途的焊接钢管 交货技术条件 第2部分:规定高温性能的电阻焊接和感应焊接非合金钢管和合金钢管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties
|
| ISO 9330-3-1997
| 压力用途的焊接钢管 交货技术条件 第3部分:规定低温性能的电阻焊接和感应焊接非合金钢管和合金钢管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties
|
| ISO 9330-4-2000
| 压力用途的焊接钢管 交货技术条件 第4部分:规定高温性能的埋弧焊接非合金钢管和合金钢管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties
|
| ISO 9330-5-2000
| 压力用途的焊接钢管 交货技术条件 第5部分:规定低温性能的埋弧焊接非合金钢管和合金钢管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties
|
| ISO 9330-6-1997
| 压力用途的焊接钢管 交货技术条件 第6部分:奥氏体不锈钢管的焊接长度
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes
|
| ISO 9402-1989
| 压力用途的无缝钢管和焊接(埋弧焊除外)钢管 检测纵向缺陷用铁磁钢管全周边磁转换/磁链试验
| Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
|
| ISO 9455-12-1992
| 软钎焊剂 试验方法 第12部分:钢管腐蚀试验
| Soft soldering fluxes; test methods; part 12: steel tube corrosion test
|
| ISO 9598-1989
| 压力用途的无缝钢管 检测横向缺陷用铁磁钢管全周边磁转换/磁链试验
| Seamless steel tubes for pressure purposes; full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
|
| ISO 9764-1989
| 压力用途的电阻焊和感应焊钢管 焊缝的纵向缺陷超声波检验
| Electric resistance and induction welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal imperfections
|
| ISO 9765-1990
| 压力用途的埋弧焊钢管 焊缝的纵向和/或横向缺陷超声波检测
| Submerged arc-welded steel tubes for pressure purposes; ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
|
| 编号 | 中文名称 | 英文名称 |
|---|