| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 1623-2-1986 | 扁平钢制产品；冷轧薄钢板和钢带.交付技术状态.一般用途结构钢 | Steel flat products; cold reduced sheet and strip; technical delivery conditions; general purpose structural steels |
| DIN 3570-1968 | 20至500NW管用圆钢带箍 | Steel Strap for Tubes of NW 20 to 500 |
| DIN 65508-1986 | 航空航天.带凸缘垫片和埋头孔、自锁、耐腐蚀钢带MJ螺纹的六角螺母.等级:1100MPa/315℃/425℃ | Aerospace; nuts, hexagon, with MJ thread, captive washer and counterbore, self-locking, corrosion-resistant steel; class: 1100 MPa/315 °C/425 °C |
| DIN EN 10106-2007 | 经完全处理后交付的非定向冷轧电工钢片和钢带 | Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state; German version EN 10106:2007 |
| DIN EN 10107-2005 | 以完全加工状态交付的晶粒定向电工钢片和钢带 | Grain-oriented electrical steel sheet and strip delivered in the fully processed state; German version EN 10107:2005 |
| DIN EN 10111-1998 | 冷弯曲成型的连续热轧低碳钢带和薄钢板.交货技术条件 | Continuously hot-rolled low carbon steel sheet and strip for cold bending - Technical delivery conditions; German version EN 10111:1998 |
| DIN EN 10132-1-2000 | 热处理用冷轧窄钢带材.交货技术条件.第1部分:总则 | Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 1: General; German version EN 10132-1:2000 |
| DIN EN 10132-2-2000 | 热处理用冷轧窄钢带材.交货技术条件.第2部分:表面硬化钢 | Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 2: Case hardening steels; German version EN 10132-2:2000 |
| DIN EN 10132-3-2000 | 热处理用冷轧窄钢带材.交货技术条件.第3部分:淬火和回火 | Cold-rolled narrow steel strip for heat-treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering; German version EN 10132-3:2000 |
| DIN EN 10140-2006 | 冷轧窄钢带.尺寸和形状公差 | Cold rolled narrow steel strip - Tolerances on dimensions and shape; German version EN 10140:2006 |
| DIN EN 10143-2006 | 连续热浸镀钢板和钢带.尺寸和形状公差 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape English version of DIN EN 10143:2006-09 |
| DIN EN 10251-1997 | 磁性材料.测定电工钢片和电工钢带几何特性值的方法 | Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip; German version EN 10251:1997 |
| DIN EN 10252-1997 | 磁性材料.中频电工钢片和电工钢带磁性测量方法 | Magnetic materials - Methods of measurement of magnetic properties of electrical steel sheet and strip at medium frequencies; German version EN 10252:1997 |
| DIN EN 10292-2007 | 冷成形带高屈服应力连续热浸镀层的钢带和钢薄板.交货技术条件 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions; German version EN 10292:2007 |
| DIN EN 10326-2004 | 连续热浸涂覆结构钢带材和板材.交货技术条件 | Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions; German version EN 10326:2004 |
| DIN EN 10327-2004 | 连续热浸涂覆冷成形低碳钢带材和板材.交货技术条件 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions; German version EN 10327:2004 |
| DIN EN 13246-2001 | 包装.捆绑钢带规范 | Packaging - Specification for tensional steel strapping; German version EN 13246:2001 |
| DIN EN 13247-2001 | 包装.道路安全绳索升降梯捆绑钢带规范 | Packaging - Specification for tensional steel strapping for lifting, lashing and securing of loads; German version EN 13247:2001 |
| DIN EN 13889-2003 | 一般提升用锻钢带销U形环.固定D形环钩和弓形环钩. 6级安全要求 | Forged steel shackles for general lifting purposes - Dee shackles and bow shackles; Grade 6 - Safety; German version EN 13889:2003 |
| DIN EN 2079-1995 | 航空航天系列.仪器和设备用耐蚀钢带法兰的精密滚珠轴承.尺寸和负载; 德文版本 EN 2079:1995 | Aerospace series - Bearings, precision ball, with flange, in corrosion resisting steel, for instruments and equipment - Dimensions and loads; German version EN 2079:1995 |
| DIN EN 4198-2007 | 航空航天系列.耐腐蚀钢带自润滑衬垫和螺纹柄的可调自动对心滑动轴承的杆端.尺寸和载荷 | Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads; German and English version EN 4198:2006 |
| DIN EN 60404-2-1998 | 磁性材料.第2部分:用爱普斯坦方框测量电工薄钢板和钢带材的磁性能的方法 | Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame (IEC 60404-2:1996); German version EN 60404-2:1998 |
| 编号 | 中文名称 | 英文名称 |