| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| EN 10048-1996 | 热轧窄钢带 尺寸和形状公差 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10126-1995 | 半成品交货的冷轧非合金钢电工钢薄板和钢带 | Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state |
| EN 10132-1-2000 | 热处理用冷轧窄钢带 交货技术条件 第1部分：总则 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General |
| EN 10132-2-2000 | 热处理用冷轧窄钢带 交货技术条件 第2部分：表面硬化钢 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels |
| EN 10132-3-2000 | 热处理用冷轧窄钢带 交货技术条件 第3部分：淬火和回火钢 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering |
| EN 10132-4-2000+AC-2002 | 热处理用冷轧窄钢带 交货技术条件 第4部分：弹簧钢和其它应用的钢 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 4: Spring steels and other applications |
| EN 10140-1996 | 冷轧窄钢带 尺寸和形状公差 | Cold rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10151-2002 | 弹簧用不锈钢钢带 交货技术条件 | Stainless steel strip for springs - Technical delivery conditions |
| EN 10214-1995 | 连续热浸镀锌铝薄钢板和钢带 交货技术条件 | Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions |
| EN 10215-1995 | 连续热浸镀铝锌薄钢板和钢带 交货技术条件 | Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions |
| EN 10246-15-2000 | 钢管的无损检测 第15部分：层状缺陷探测用的制造焊接钢管用钢带/钢板的自动超声检验 | Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections |
| EN 10251-1997 | 磁性材料 测定电工钢片和电工钢带几何特性值的方法 | Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip |
| EN 10265-1995 | 磁性材料 钢板和钢带的机械特性和导磁率的规范 | Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
| EN 10292-2000+A1-2003 | 冷成型用较高屈服强度的连续热扎镀层钢带和薄钢板 交货技术条件 | Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming - Technical delivery conditions |
| EN 10303-2001 | 中频用薄磁钢板和钢带 | Thin magnetic steel sheet and strip for use at medium frequencies |
| EN 13246-2001 | 包装 拉伸钢带规范 | Packaging - Specification for tensional steel strapping |
| EN 13247-2001 | 包装 载荷提升、捆绑和固定用拉伸钢带规范 | Packaging - Specification for tensional steel strapping for lifting, lashing and securing of loads |
| EN 2810-2001 | 航空航天系列 耐热纯化钢带槽／带眼扁矮普通对边六角螺母 等级：900 MPa (环境温度)/650℃ | Aerospace series - Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification: 900 MPa (at ambient temperature)/650℃ |
| EN 523-2003 | 预应力钢筋束用钢带材护套 术语、要求、质量控制 | Steel strip sheaths for prestressing tendons - Terminology, requirements, quality control |
| EN 524-1-1997 | 预应力钢筋束用钢带材护套 试验方法 第1部分：形状和尺寸的确定 | Steel strip sheaths for prestressing tendons - Test methods - Part 1: Determination of shape and dimensions |
| EN 524-2-1997 | 预应力钢筋束用钢带材护套 试验方法 第2部分：挠性的测定 | Steel strip sheaths for prestressing tendons - Test methods - Part 2: Determination of flexural behaviour |
| EN 524-3-1997 | 预应力钢筋束用钢带材护套 试验方法 第3部分：反复弯曲试验 | Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test |
| EN 524-4-1997 | 预应力钢筋束用钢带材护套 试验方法 第4部分：抗横向负载力的测定 | Steel strip sheaths for prestressing tendons - Test methods - Part 4: Determination of lateral load resistance |
| EN 524-5-1997 | 预应力钢筋束用钢带材护套 试验方法 第5部分：抗拉伸负载力的测定 | Steel strip sheaths for prestressing tendons - Test methods - Part 5: Determination of tensile load resistance |
| EN 524-6-1997 | 预应力钢筋束用钢带材护套 试验方法 第6部分：密封性的测定(水流失的测定) | Steel strip sheaths for prestressing tendons - Test methods - Part 6: Determination of leaktightness (Determination of water loss) |
| EN 60404-2-1998 | 磁性材料 第2部分：用爱普斯坦框系统测量电工钢片和钢带的磁性能的方法 | Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame (IEC 60404-2:1996) |
| prEN 10326-2002 | 连续热浸镀结构钢带和薄钢带 交货技术条件 | Continuously hot-dip coated structural steels strip and sheet - Technical delivery conditions |
| prEN 10327-2002 | 冷成形用连续热浸镀冷扎低碳钢带和薄钢带 交货技术条件 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
| prEN 4351-1997 | 航空航天系列 耐腐蚀钢带自对中双排滚珠轴承和带螺纹柄的活塞杆端 尺寸和负荷 英制 | Aerospace series - Rod ends, with self-aligning double row ball bearings and threaded shank in corrosion resisting steel - Dimensions and loads - Inch series |
| 编号 | 中文名称 | 英文名称 |