| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 60335-2-45-2005 | 家用和类似用途电器.安全.第2-45部分:便携式电热工具和类似电器的特殊要求 | Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances |
| IEC 60512-15-8-1995 | 电子设备用机电元件 基本试验程序和测量方法 第15部分:接触件及引出端机械试验 第8节:试验15h:接触件固定机 | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h: Contact retention system resistance to tool application |
| IEC 60743-2001 | 带电作业 工具、设备和装置术语 | Live working - Terminology for tools, equipment and devices |
| IEC 60745-1-2006 | 手持式电动工具.安全.第1部分:一般要求 | Hand-held motor-operated electric tools - Safety - Part 1: General requirements |
| IEC 60745-2-1-2006 | 手持式电动工具.安全性.第2-1部分:电钻和冲击钻的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills |
| IEC 60745-2-11-2006 | 手持式电动工具.安全.第2-11部分:往复锯(曲线锯和刀锯)的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) |
| IEC 60745-2-12-2006 | 手持式电动工具.安全.第2-12部分:混凝土振捣器的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators |
| IEC 60745-2-13-2006 | 手持式电动工具的安全 第2-13部:链锯的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws |
| IEC 60745-2-14 AMD 1-2006 | 手持式电动工具的安全.第2-14部分:刨刀的特殊要求.修改件1 | Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers; Amendment 1 |
| IEC 60745-2-14 Edition 2.1-2006 | 手持式电动工具的安全.第2-14部分:刨刀的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers |
| IEC 60745-2-14-2003 | 手持式电动工具的安全.第2-14部分:电刨的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers |
| IEC 60745-2-15-2006 | 手持电动工具.安全.第2-15部分:绿篱修剪器的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers |
| IEC 60745-2-16-1993 | 手持式电动工具的安全 第2-16部分:铆钉机的特殊要求 | Safety of hand-held motor-operated electric tools; part 2: particular requirements for tackers |
| IEC 60745-2-17-2003 | 手持式电动工具的安全.第2-17部分:木铣和修整机的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers |
| IEC 60745-2-18-2003 | 手持式电动工具的安全.第2-18部分:打包工具的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools |
| IEC 60745-2-19-2005 | 手持式电动工具.安全.第2-19部分:连接器的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers |
| IEC 60745-2-2-2006 | 手持式电动工具.安全.第2-2部分:旋具和冲击扳手的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches |
| IEC 60745-2-20-2003 | 手持式电动工具的安全.第2-20部分:带锯的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws |
| IEC 60745-2-21-2003 | 手持式电动工具.安全.第2-21部分:排水沟清理机的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners |
| IEC 60745-2-3-2006 | 手持式电动工具的安全 第2-3部分:电动砂轮机、抛光机和盘式砂光机的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders |
| IEC 60745-2-4-2006 | 手持式电动工具的安全.第2-4部分:盘式除外的砂轮机和抛光机的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type |
| IEC 60745-2-5-2006 | 手持式电动工具.安全性.第2-5部分:圆盘锯的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws |
| IEC 60745-2-6 AMD 1-2006 | 手持式电动工具.安全.第2-6部分:电锤的特殊要求.修改件1 | Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers; Amendment 1 |
| IEC 60745-2-6 Edition 2.1-2006 | 手持式电动工具.安全性.第2-6部分:电锤的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers |
| IEC 60745-2-6-2005 | 手持式电动工具的安全.第2-6部分:电锤的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers |
| IEC 60745-2-7-1989 | 手持式电动工具的安全 第2-7部分:不可燃液体用喷枪的特殊要求 | Safety of hand-held motor-operated electric tools; part 2: particular requirements for spray guns for non-flammable liquids |
| IEC 60745-2-8-2003 | 手持式电动工具的安全.第2-8部分:金属板剪和步冲轮廓机的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for sheet metal shears and nibblers |
| IEC 60745-2-9-2003 | 手持式电动工具的安全.第2-9部分:攻丝机的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers |
| IEC 60832 Corrigendum 1-2000 | 带电作业用绝缘杆(绝缘棒)及通用工具附件(金具) | Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working |
| IEC 60832-1988 | 带电作业用绝缘杆(绝缘棒)及通用工具附件(金具) | Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working |
| IEC 60900-2004 | 带电作业.交流1000V和直流1500V以下带电作业用手持工具 | Live working - Hand tools for use up to 1000 V a.c. and 1500 V d.c. |
| IEC 61029-1-1990 | 移动式电动工具的安全 第1部分:一般要求 | Safety of transportable motor-operated electric tools; part 1: general requirements |
| IEC 61029-2-1 AMD 1-1999 | 移动式电动工具的安全 第2-1部分:园锯的特殊要求 修改1 | Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saws; Amendment 1 |
| IEC 61029-2-1 AMD 2-2001 | 移动式电动工具的安全 第2-1部分:圆锯的特殊要求 修改2 | Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saws; Amendment 2 |
| IEC 61029-2-1-1993 | 移动式电动工具的安全 第2-1部分:圆锯的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for circular saws |
| IEC 61029-2-10-1998 | 移动式电动工具的安全 第2-10部分:切割砂轮机的特殊要求 | Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders |
| IEC 61029-2-11-2001 | 移动或电动工具的安全 第2-11部分：斜角 台式锯的特殊要求 | Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for mitre-bench saws |
| IEC 61029-2-2-1993 | 移动式电动工具的安全 第2-2部分:旋臂锯的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for radial arm saws |
| IEC 61029-2-3 AMD 1-2001 | 移动式电动工具的安全 第2-3部分:刨和刨板机的特殊要求 修改1 | Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers; Amendment 1 |
| IEC 61029-2-3-1993 | 移动式电动工具的安全 第2-3部分:刨和刨板机的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for planers and thicknessers |
| IEC 61029-2-4 AMD 1-2001 | 移动式电动工具的安全 第2-4部分:台式砂轮机的特殊要求 修改1 | Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders; Amendment 1 |
| IEC 61029-2-4-1993 | 移动式电动工具的安全 第2-4部分:台式砂轮机的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for bench grinders |
| IEC 61029-2-5 AMD 1-2001 | 移动式电动工具的安全 第2-5部分:带锯的特殊要求 修改1 | Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws; Amendment 1 |
| IEC 61029-2-5-1993 | 移动式电动工具的安全 第2-5部分:带锯的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for band saws |
| IEC 61029-2-6-1993 | 移动式电动工具的安全 第2-6部分:注水金刚石钻的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond drills with water supply |
| IEC 61029-2-7-1993 | 移动式电动工具的安全 第2-7部分:注水金刚石锯的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond saws with water supply |
| IEC 61029-2-8 AMD 1-1999 | 移动式电动工具的安全 第2-8部分:单芯轴垂直模压机的特殊要求 修改1 | Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders; Amendment 1 |
| IEC 61029-2-8 AMD 2-2001 | 移动式电动工具的安全 第2-8部分:单芯轴垂直模压机的特殊要求 修改2 | Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders; Amendment 2 |
| IEC 61029-2-8-1995 | 移动式电动工具的安全 第2-8部分:单芯轴垂直模压机的特殊要求 | Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders |
| IEC 61029-2-9-1995 | 移动式电动工具的安全 第2-9部分:斜面锯的特殊要求 | Safety of transportable motor-operated electric tools - Part 2: Particular requirements for mitre saws |
| IEC 61347-2-5-2000 | 灯的控制装置 第2-5部分:公共运输工具照明用直流电子镇流器的特殊要求 | Lamp controlgear - Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting |
| IEC 61477 AMD 1-2002 | 带电作业.工具,器械和设备使用的最低要求.修改件1 | Live working - Minimum requirements for the utilization of tools, devices and equipment; Amendment 1 |
| IEC 61477 AMD 2-2004 | 带电作业.使用工具、器件和设备的最低要求.修改件2 | Live working - Minimum requirements for the utilization of tools, devices and equipment; Amendment 2 |
| IEC 61477 Edition 1.1-2002 | 带电作业.工具,器械和设备使用的最低要求 | Live working - Minimum requirements for the utilization of tools, devices and equipment |
| IEC 61477 Edition 1.2-2005 | 带电作业.工具、器械和设备使用的最低要求 | Live working - Minimum requirements for the utilization of tools, devices and equipment |
| IEC 61477-2001 | 带电作业 使用工具、器件和设备的最低要求 | Live working - Minimum requirements for the utilization of tools, devices and equipment |
| IEC 61499-2-2005 | 功能块.第2部分:软件工具要求 | Function blocks - Part 2: Software tool requirements |
| IEC 62237-2003 | 带电作业.液压工具和设备用带配件的绝缘软管 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment |
| IEC/PAS 62424-2005 | P&I图示和P&ID工具与PCE-CAE工具间数据交换的过程控制工程要求的表示 | representation of process control engineering requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools |
| IEC/PAS 62437-2005 | 板式运载工具、船舶和设备上用的接收机保护用无线电干扰特性.限值和测量方法.有源天线规范 | Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement - Specification for active antennas |
| IEC/PAS 62453-1-2006 | 现场设备工具界面规范.第1部分:概念和详细描述 | Field Device Tool (FDT) interface specification - Part 1: Concepts and detailed description |
| IEC/PAS 62453-2-2006 | 现场设备工具界面规范.第2部分:I网络总线通讯(NTERBUS) | Field device tool (FDT) interface specification - Part 2: INTERBUS communication |
| IEC/PAS 62453-3-2006 | 现场设备工具界面规范.第3部分:PROFIBUS通讯 | Field device tool (FDT) interface specification - Part 3: PROFIBUS communication |
| IEC/PAS 62453-4-2006 | 现场设备工具界面规范.第4部分:HART通讯 | Field device tool (FDT) interface specification - Part 4: HART communication |
| IEC/PAS 62453-5-2006 | 现场设备工具界面规范.第5部分:现场总线基金会(FOUNDATION FIELDBUS)通讯 | Field device tool (FDT) interface specification - Part 5: FOUNDATION FIELDBUS communication |
| IEC/TS 61944-2000 | 集成电路 生产线批准 论证工具 | Integrated circuits - Manufacturing line approval - Demonstration vehicles |
| ISO 10069-1-1991 | 冲压工具 弹性体压缩弹簧 第1部分:一般规范 | Tools for pressing; elastomer pressure springs; part 1: general specification |
| ISO 10069-2-1991 | 冲压工具 弹性体压缩弹簧 第2部分:附件规范 | Tools for pressing; elastomer pressure springs; part 2: specification of accessories |
| ISO 10071-1-2001 | 冲压工具 球形锁紧冲床 第1部分：用于轻载荷的球形锁紧冲床 | Tools for pressing - Ball-lock punches - Part 1: Ball-lock punches for light duty |
| ISO 10071-2-2005 | 冲压工具.球形锁紧冲床.第2部分:用于重载荷的球形锁紧冲床 | Tools for pressing - Ball-lock punches - Part 2: Ball-lock punches for heavy duty |
| ISO 10072-2004 | 模铸工具.浇口套.尺寸 | Tools for moulding - Sprue bushes - Dimensions |
| ISO 10073-1991 | 模铸工具 支承柱 | Tools for moulding; support pillars |
| ISO 10102-2001 | 螺钉和螺母用装配工具 双头呆扳手 扳手长度和头部厚度 | Assembly tools for screws and nuts - Double headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads |
| ISO 10103-2001 | 螺钉和螺母用装配工具 双头直颈和弯颈梅花扳手 扳手长度和头部厚度 | Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads |
| ISO 10104-2001 | 螺钉和螺母用装配工具 双头高颈和矮颈梅花扳手 扳手长度和头部厚度 | Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads |
| ISO 10242-1-1998 | 冲压工具 冲头柄 第1部分:A型 | Tools for pressing - Punch holder shanks - Part 1: Type A |
| ISO 10242-2-1991 | 冲压工具 冲头柄 第2部分:C型 | Tools for pressing; punch holder shanks; part 2: type C |
| ISO 10242-3-1991 | 冲压工具 冲头柄 第3部分:D型 | Tools for pressing; punch holder shanks; part 3: type D |
| ISO 10243-1991 | 冲压工具 矩形截面压缩弹簧 安装尺寸和颜色标志 | Tools for pressing; compression springs with rectangular section; housing dimensions and colour coding |
| ISO 10791-9-2001 | 加工中心试验条件 第9部分：变换工具和托架的操作时间的评价 | Test conditons for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change |
| ISO 1085-1999 | 螺钉和螺母用装配工具 双头扳手 对边尺寸组配 | Assembly tools for screws and nuts - Double-ended wrenches - Size pairing |
| ISO 10907-1-1996 | 模铸工具 定位环 第1部分:小型和中型模具内无绝热层安装用定位环 A型和B型 | Tools for moulding - Locating rings - Part 1: Locating rings for mounting without thermal insulating sheets in small or medium moulds - Types A and B |
| ISO 10914-1996 | 螺钉和螺母用装配工具 花键传动套筒扳手 | Assembly tools for screws and nuts - Sockets and wrenches for spline drive |
| ISO 11054-2006 | 切削工具.高速钢分组的命名 | Cutting tools - Designation of high-speed steel groups |
| ISO 11415-1997 | 冲压工具 成套模具 | Tools for pressing - Die sets |
| ISO 1173-2001 | 螺钉和螺母用装配工具 手动和机动旋转头的传动端及连接部件 尺寸，转矩试验 | Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing |
| ISO 1174-1-1996 | 螺钉和螺母用装配工具 传动方头 第1部分:手动套筒板手的传动方头 | Assembly tools for screws and nuts - Driving squares - Part 1: Driving squares for hand socket tools |
| ISO 1174-2-1996 | 螺钉和螺母用装配工具 传动方头 第2部分:机动套筒扳手工具的传动方头 | Assembly tools for screws and nuts - Driving squares - Part 2: Driving squares for power socket tools |
| ISO 11789-1999 | 刚性切割工具的机动边缘 定义、安全要求和试验过程 | Powered edgers with rigid cutting means - Definitions, safety requirements and test procedures |
| ISO 1180 ADD 1-1985 | 气动工具手柄和夹紧套筒配合尺寸 补充1 | Shanks for pneumatic tools and fitting dimensions of chuck bushings; addendum 1 |
| ISO 1180-1983 | 气动工具手柄和夹紧套筒配合尺寸 | Shanks for pneumatic tools and fitting dimensions of chuck bushings |
| ISO 11900-1-2007 | 冲压工具.球锁紧凸模固定板.第1部分:小功率用A型和B型、矩形和正方形固定板 | Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty |
| ISO 11900-2-2001 | 冲压工具 球锁紧冲头固定板 第2部分：用于轻载荷的C型和D型固定板 | Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty |
| ISO 11900-3-2004 | 冲压工具.球锁紧冲头固定板.第3部分:用于重载荷的减径E型固定板 | Tools for pressing - Ball-lock punch retainers - Part 3: Type E, reduced for heavy duty |
| ISO 11901-1-2003 | 冲压工具.气压弹簧.第1部分:一般规范 | Tools for pressing - Gas springs - Part 1: General specifications |
| ISO 11901-2-2004 | 冲压工具.气压弹簧.第2部分:附件规范 | Tools for pressing - Gas springs - Part 2: Specification of accessories |
| ISO 11903-1996 | 冲压工具 导柱装置 | Tools for pressing - Guide pillar mountings |
| ISO 12165-2000 | 模铸工具 压铸模和注塑模及压铸冲模部件 术语和符号 两种语言版 | Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols |
| ISO 13399-1-2006 | 切削工具数据表示和交换.第1部分:基本原则和一般信息模式的概括 | Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model |
| ISO 13628-8 Technical Corrigendum 1-2005 | 石油和天然气工业.水下生产系统的设计和操作.第8部分:水下生产系统上的遥控运载工具接口.技术勘误1 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems; Technical Corrigendum 1 |
| ISO 13628-8-2002 | 石油和天然气工业.水下生产系统的设计和操作.第8部分:水下生产系统上的遥控运载工具接口 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems |
| ISO 14649-121-2005 | 工业自动化系统和集成.机械装置控制.计算机数控器用数据模型.第121部分:车床用工具 | Industrial automation systems and integration - Physical device control - Data model for computerized numerical controllers - Part 121: Tools for turning machines |
| ISO 15600-2000 | 模铸工具 注塑模用隔热板 | Tools for moulding - Thermal insulating sheets for injection moulds |
| ISO 15744-2002 | 手持非电动工具.噪声测量代码.工程法(2级) | Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) |
| ISO 15863-2003 | 航天系统.航天飞机与运载工具间接口的控制文献 | Space systems - Spacecraft-to-launch-vehicle interface control document |
| ISO 16004-2005 | 飞机地面设备.乘客登机桥或运输工具.与飞机舱门接口的要求 | Aircraft ground equipment - Passenger boarding bridge or transfer vehicle - Requirements for interface with aircraft doors |
| ISO 16366-2001 | 冲压工具 成 L 型导向件 | Tools for pressing - L-shaped guides |
| ISO 16367-2001 | 冲压工具 导板 U- 和 V- 模块 | Tools for pressing - Guide plates - U- and V-blocks |
| ISO 16915-2003 | 模制工具.直浇口拉出器 | Tools for moulding - Sprue pullers |
| ISO 16916-2004 | 制模工具.注塑模用工具规格表 | Tools for moulding - Tool specification sheet for injection moulds |
| ISO 1703-2005 | 螺钉和螺母用装配工具.命名和术语 | Assembly tools for screws and nuts - Designation and nomenclature |
| ISO 1711-1-2007 | 螺钉和螺母用装配工具.技术规范.第1部分:手动扳手和套筒 | Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets |
| ISO 1711-2-2005 | 螺钉和螺母用装配工具.技术规范 第2部分:机动套筒(扳手) | Assembly tools for screws and nuts - Technical specifications - Part 2: Machine-operated sockets ("impact") |
| ISO 17401-2004 | 航天系统.运载工具用航天飞行器接口要求文献 | Space systems - Spacecraft interface requirements document for launch vehicle services |
| ISO 17567-2005 | 农业和林业用拖拉机和全套工具.超液压动力 | Agricultural and forestry tractors and implements - Hydraulic power beyond |
| ISO 18084-2005 | 压片工具.冲床和模具 | Press tools for tablets - Punches and dies |
| ISO 2236-1991 | 螺钉和螺母用装配工具 锻制的和管状套筒板手 头部最大外形尺寸 | Assembly tools for srews and nuts; forged and tubular socket wrenches; maximum outside head dimensions |
| ISO 2351-1-2007 | 螺钉和螺母用装配工具.机动旋具头.第1部分:一字槽头螺钉用旋具头 | Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws |
| ISO 2351-2-2002 | 螺钉和螺母用装配工具.机动旋具头.第2部分:十字凹头螺钉用旋具头 | Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for cross-recessed head screws |
| ISO 2351-3-2002 | 螺钉和螺母用装配工具.机动旋具头.第3部分:六角凹头螺钉用旋具头 | Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws |
| ISO 2380-1-2004 | 螺钉和螺母用装配工具.一字槽螺钉的旋具.第1部分:手动或者机动旋具工作部 | Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1: Tips for hand- and machine-operated screwdrivers |
| ISO 2380-2-2004 | 螺钉和螺母用装配工具.一字槽螺钉的旋具.第2部分:手动旋具的一般要求、旋杆长度和标志 | Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers |
| ISO 2725-1-2007 | 螺钉和螺母用装配工具.第1部分:手动扳手 | Assembly tools for screws and nuts - Square drive sockets - Part 1: Hand-operated sockets |
| ISO 2725-2-2007 | 螺钉和螺母用装配工具.方头钻动扳手.第2部分:机动扳手尺寸 | Assembly tools for screws and nuts - Square drive sockets - Part 2: Machine-operated sockets ("impact") |
| ISO 2725-3-2001 | 螺钉和螺母用装配工具 方头传动套筒 第3部分：机动套筒（非撞击） 尺寸 | Assembly tools for screws and nuts - Square drive sockets - Part 3: Machine-operated sockets ("non impact"); Dimensions |
| ISO 2726-1995 | 木工工具 金属台刨、刨刀和护铁 | Woodworking tools - Metal-bodied bench planes, plane cutters and cap irons |
| ISO 2729-1995 | 木工工具 凿子和半圆凿 | Woodworking tools - Chisels and gouges |
| ISO 2730-1973 | 木工工具 木体刨 | Woodworking tools; Wooden bodied planes |
| ISO 2787-1984 | 凿岩机械与气动工具 性能试验 | Rotary and percussive pneumatic tools; performance tests |
| ISO 2936-2001 | 螺钉和螺母用装配工具 内六角扳手 | Assembly tools for screws and nuts - Hexagon socket screw keys |
| ISO 3315-1996 | 螺钉和螺母用装配工具 手动方榫传动套筒扳手传动件 尺寸和试验 | Assembly tools for screws and nuts - Driving parts for hand-operated square drive socket wrenches - Dimensions and tests |
| ISO 3316-1996 | 螺钉和螺母用装配工具 手动方榫传动套筒扳手附件 尺寸和试验 | Assembly tools for screws and nuts - Attachments for hand-operated square drive socket wrenches - Dimensions and tests |
| ISO 3317-1974 | 螺钉和螺母用装配工具 机动工具的六角传动端 | Assembly tools for screws and nuts; Square drive extension hexagon insert, for power socket wrenches |
| ISO 3318-1990 | 螺钉和螺母用装配工具 双头呆扳手、双头梅花扳手和两用扳手 头部外形最大宽度 | Assembly tools for screws and nuts; double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches; maximum widths of heads |
| ISO 3857-1-1977 | 压缩机、风动工具和风动机械 词汇 第1部分:通用术语 两种语言版 | Compressors, pneumatic tools and machines; Vocabulary; Part I : General Bilingual edition |
| ISO 3857-2-1977 | 压缩机、风动工具和风动机械 词汇 第2部分:压缩机 两种语言版 | Compressors, pneumatic tools and machines; Vocabulary; Part II : Compressors Bilingual edition |
| ISO 3857-3-1989 | 压缩机、风动工具和风动机械 词汇 第3部分:风动工具和风动机械 两种语言版 | Compressors, pneumatic tools and machines; vocabulary; part 3: pneumatic tools and machines |
| ISO 4229-1977 | 螺钉和螺母用装配工具 开口为50mm～120mm的单头扳手 | Assembly tools for screws and nuts; Single-head engineer's wrenches; Gaps from 50 to 120 mm |
| ISO 4510-1-1987 | 土方机械 维修工具 第1部分:一般维修和调整工具 | Earth-moving machinery; Service tools; Part 1 : Common maintenance and adjustment tools |
| ISO 4510-2-1996 | 土方机械 维修工具 第2部分:机械式拉拔器和推拔器 | Earth-moving machinery - Service tools - Part 2: Mechanical pullers and pushers |
| ISO 4957-1999 | 工具钢 | Tool steels |
| ISO 5391-2003 | 风动工具和机器.词汇 | Pneumatic tools and machines - Vocabulary |
| ISO 5393-1994 | 用于螺纹紧固件的回转式气动装配工具 性能试验方法 | Rotary tools for threaded fasteners - Performance test method |
| ISO 5949-1983 | 工具钢和轴承钢 用标准图谱法评定碳化物分布的显微照相法 | Tool steels and bearing steels; Micrographic method for assessing the distribution of carbides using reference photomicrographs |
| ISO 603-16 Technical Corrigendum 1-1999 | 粘合磨料产品 尺寸 第16部分:手持动力工具的切削砂轮 技术勘误1 | Bonded abrasive products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools; Technical Corrigendum 1 |
| ISO 603-16-1999 | 粘合磨料产品 尺寸 第16部分:手持动力工具的切削砂轮 | Bonded abrasive products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools |
| ISO 603-6 Technical Corrigendum 1-1999 | 粘合磨料产品 尺寸 第6部分:工具和工具室磨削用砂轮 技术勘误1 | Bonded abrasive products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding; Technical Corrigendum 1 |
| ISO 603-6-1999 | 粘合磨料产品 尺寸 第6部分:工具和工具室磨削用砂轮 | Bonded abrasive products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding |
| ISO 6104-2005 | 超磨料制品.带金刚石或立方氮化硼的旋转磨削工具.一般评述、名称与符号和多种语言术语 | Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature |
| ISO 6544-1981 | 安装螺纹紧固件用手持式气动工具 扭矩反作用和扭矩冲击测量 | Hand-held pneumatic assembly tools for installing threaded fasteners; Reaction torque and torque impulse measurements |
| ISO 6743-11-1990 | 润滑剂、工业润滑油和有关产品(L类) 分类 第11部分:P组(风动工具) | Lubricants, industrial oils and related products (class L); classification; part 11: family P (pneumatic tools) |
| ISO 6751-1998 | 模铸工具 圆柱头推杆 | Tools for moulding - Ejector pins with cylindrical head |
| ISO 6753-1-2005 | 冲压和模铸工具.机加工板.第1部分:冲压工具的机加工板 | Tools for pressing and moulding - Machined plates - Part 1: Machined plates for press tools |
| ISO 6753-2-1998 | 冲压和模铸工具 机加工板 第2部分:成型模机加工板 | Tools for pressing and moulding - Machined plates - Part 2: Machined plates for moulds |
| ISO 6787-2001 | 螺钉和螺母用装配工具 活扳手 | Assembly tools for screws and nuts - Adjustable wrenches |
| ISO 6788-1997 | 螺钉和螺母用装配工具 十字柄套筒扳手 尺寸和扭矩试验 | Assembly tools for screws and nuts - Four-way socket wrenches - Dimensions and torque test |
| ISO 6789-2003 | 螺钉和螺母用装配工具.手动转矩工具.设计一致性试验、质量一致性试验和重新校准程序的要求和试验方法 | Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure |
| ISO 691-2005 | 螺钉和螺母用装配工具.扳手和套筒扳手的开口.常用公差 | Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use |
| ISO 7279-1984 | 承压管用聚丙烯(PP)管件 用热工具熔接的承口 公制系列 承口尺寸 | Polypropylene (PP) fittings for pipes under pressure; Sockets for fusion using heated tools; Metric series; Dimensions of sockets |
| ISO 7388-1-2007 | 自动工具转换用7/24锥度工具柄.第1部分:A、AD、 AF、 U、UD和UF型柄的尺寸和标志 | Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF |
| ISO 7388-2-2007 | 自动工具转换用7/24锥度工具柄.第2部分:J、JD和JF型柄的尺寸和标志 | Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF |
| ISO 7388-3-2007 | 自动工具转换用7/24锥度工具柄.第3部分:AC、AD、 AF、 UC、UD、UF、JD和JF型柄保持按钮 | Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF |
| ISO 7738-2001 | 螺钉和螺母用装配工具 两用扳手 扳手长度和头部最小厚度 | Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads |
| ISO 7787-3-1991 | 牙科旋转器械 切割工具 第3部分:技工室研磨机用硬质合金刀具 | Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines |
| ISO 8017-2007 | 模制工具.直的和带肩导柱、带肩定位导柱 | Tools for moulding - Guide pillars, straight and shouldered, and locating guide pillars, shouldered |
| ISO 8018-2007 | 模制工具.有头的导衬和有头的定位导衬 | Tools for moulding - Guide bushes, headed, and locating guide bushes, headed |
| ISO 8020-2002 | 冲压工具.有圆柱头和直杆或者缩径柄的冲头 | Tools for pressing - Punches with cylindrical head and straight or reduced shank |
| ISO 8085-1-2001 | 输送气体燃料的聚乙烯管用的聚乙烯管件 公制系列 规范 第1部分：采用加热工具的插口熔接管件 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 1: Fittings for socket fusion using heated tools |
| ISO 8085-2 Technical Corrigendum 1-2001 | 输送气体燃料的聚乙烯管用的聚乙烯管件 公制系列 规范 第2部分：对熔接、采用加热工具的插口熔接以及用 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings; Technical Corrigendum 1 |
| ISO 8085-2-2001 | 输送气体燃料的聚乙烯管用的聚乙烯管件 公制系列 规范 第2部分：对熔接、采用加热工具的插口熔接以及用 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels - Metric series; Specifications - Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings |
| ISO 8404-2003 | 铸模用工具.斜销 | Tools for moulding - Angle pins |
| ISO 8405-1998 | 模铸工具 圆柱头推管 一般用途基本系列 | Tools for moulding - Ejector sleeves with cylindrical head - Basic series for general purposes |
| ISO 8406-2001 | 模铸工具 成型模 圆形定位部件和定位架 | Tools for moulding - Mould bases - Round locating elements and spacers |
| ISO 8504-3-1993 | 涂装油漆和有关产品前钢材预处理 表面预处理方法 第3部分:手工和动力工具清洗 | Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning |
| ISO 8662-1-1988 | 便携式手提动力工具 手柄振动测量 第1部分:总则 | Hand-held portable power tools; measurement of vibrations at the handle; part 1: general |
| ISO 8662-10-1998 | 便携式手提动力工具 手柄振动测量 第10部分:冲剪和剪切 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 10: Nibblers and shears |
| ISO 8662-11 AMD 1-2001 | 便携式手提动力工具 手柄振动测量 第11部分:接合件传动工具 修改1 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 11: Fastener driving tools; Amendment 1 |
| ISO 8662-11-1999 | 便携式手提动力工具 手柄振动测量 第11部分:接合件传动工具 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 11: Fastener driving tools |
| ISO 8662-12-1997 | 便携式手提动力工具 手柄振动测量 第12部分:往复式锯和锉以及摆动或旋转式锯 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action |
| ISO 8662-13 Technical Corrigendum 1-1998 | 便携式手提动力工具 手柄振动测量 第13部分:模具研磨机 技术勘误1 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders; Technical Corrigendum 1 |
| ISO 8662-13-1997 | 便携式手提动力工具 手柄振动测量 第13部分:模具研磨机 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders |
| ISO 8662-14-1996 | 便携式手提动力工具 手柄振动测量 第14部分:采石工具和针束除锈机 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers |
| ISO 8662-2 AMD 1-1999 | 便携式手提动力工具 手柄振动测量 第2部分:凿锤和铆钉锤 修改1 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers; Amendment 1 |
| ISO 8662-2-1992 | 便携式手提动力工具 手柄振动测量 第2部分:凿锤和铆钉锤 | Hand-held portable power tools; measurement of vibrations at the handle; part 2: chipping hammers and riveting hammers |
| ISO 8662-3 AMD 1-1999 | 便携式手提动力工具 手柄振动测量 第3部分:岩石钻头和旋转锤 修改1 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 3: Rock drills and rotary hammers; Amendment 1 |
| ISO 8662-3-1992 | 便携式手提动力工具 手柄振动测量 第3部分:岩石钻头和旋转锤 | Hand-held portable power tools; measurement of vibrations at the handle; part 3: rock drills and rotary hammers |
| ISO 8662-4-1994 | 便携式手提动力工具 手柄振动测量 第4部分:磨床 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders |
| ISO 8662-5 AMD 1-1999 | 便携式手提动力工具 手柄振动测量 第5部分:施工用路面轧碎机和锤 修改1 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work; Amendment 1 |
| ISO 8662-5-1992 | 便携式手提动力工具 手柄振动测量 第5部分:施工用路面轧碎机和锤 | Hand-held portable power tools; measurement of vibrations at the handle; part 5: pavement breakers and hammers for construction work |
| ISO 8662-6-1994 | 便携式手提动力工具 手柄振动测量 第6部分:冲击钻 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills |
| ISO 8662-7-1997 | 便携式手提动力工具 手柄振动测量 第7部分:具有冲击、脉冲或棘轮作用力的扳手、螺丝刀和拧螺母机 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, srewdrivers and nut runners with impact, impulse or ratched action |
| ISO 8662-8-1997 | 便携式手提动力工具 手柄振动测量 第8部分:抛光机和旋转式轨道和特殊轨道磨光机 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders |
| ISO 8662-9-1996 | 便携式手提动力工具 手柄振动测量 第9部分:汽锤 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 9: Rammers |
| ISO 8693-1998 | 模铸工具 扁推杆 | Tools for moulding - Flat ejector pins |
| ISO 8694-1998 | 模铸工具 有肩推杆 | Tools for moulding - Shouldered ejector pins |
| ISO 8695-1987 | 冲压工具 冲床 冲头和术语 两种语言版 | Tools for pressing; Punches; Nomenclature and terminology Bilingual edition |
| ISO 8764-1-2004 | 螺钉和螺母用装配工具.十字槽头螺钉用旋具.第1部分:驱动头 | Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 1: Driver tips |
| ISO 8764-2-2004 | 螺钉和螺母用装配工具.十字槽头螺钉用旋具.第2部分:手动旋具刀身长度和标记的一般要求 | Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers |
| ISO 8977-2003 | 冲压工具.冲模 | Tools for pressing - Matrixes |
| ISO 9141-3-1998 | 道路车辆 诊断系统 第3部分:车辆和OBDⅡ扫描工具之间通信的检验 | Road vehicles - Diagnostic systems - Part 3: Verification of the communication between vehicle and OBD II scan tool |
| ISO 9181-2007 | 冲压工具.60°圆锥头的和缩径的圆冲头 | Tools for pressing - Round punches with 60° conical head and reduced shank |
| ISO 9183-1-1990 | 冲压工具 冲压模磨板 第1部分:A型 | Tools for pressing; wear plates for press dies; part 1: type A |
| ISO 9183-2-1993 | 冲压工具 冲压模磨板 第2部分:B型 | Tools for pressing; wear plates for press dies; part 2: type B |
| ISO 9449-2007 | 模制工具.定心套 | Tools for moulding - Centring sleeves |
| ISO/IEC 11581-5-2004 | 信息技术.用户系统接口和符号.图标符号和功能.第5部分:工具图标 | Information technology - User system interfaces and symbols - Icon symbols and functions - Part 5: Tool icons |
| ISO/IEC 13719-1-1998 | 信息技术 可移植的公共工具环境(PCTE) 第1部分:抽象规范 | () |
| ISO/IEC 13719-2-1998 | 信息技术 可移植的公共工具环境(PCTE) 第2部分:C编程语言联编 | () |
| ISO/IEC 13719-3-1998 | 信息技术 可移植的公共工具环境(PCTE) 第3部分:Ada编程语言联编 | () |
| ISO/IEC 13719-4-1998 | 信息技术 可移植的公共工具环境(PCTE) 第4部分:IDL(接口定义语言)联编 | () |
| ISO/IEC 14102-1995 | 信息技术 CASE工具的评价与选择指南 | Information technology - Guideline for the evaluation and selection of CASE tools |
| ISO/IEC 14496-4 AMD 3-2005 | 信息技术.音视对象的编码.第4部分:一致性试验.修改件3:视频新等级和工具 | Information technology - Coding of audio-visual objects - Part 4: Conformance testing; Amendment 3: Visual new levels and tools |
| ISO/IEC 14496-5 AMD 3-2003 | 信息技术.音频-可视对象的编码.第5部分:参考软件.修改件3:新可视等级和工具 | Information technology - Coding of audio-visual objects - Part 5: Reference software; Amendment 3: Visual new level and tools |
| ISO/IEC 15444-9 AMD 1-2006 | 信息技术.JPEG2000图像编码系统.交互工具、应用程序接口和协议.第9部分:修改件1:应用程序接口、元数据和编 | Information technology - JPEG 2000 image coding system: Interactivity tools, APIs and protocols - Part 9: Amendment 1: API's, metadata, and editing |
| ISO/IEC 15444-9 Technical Corrigendum 1-2007 | 信息技术.JPEG 2000图象编码系统:交互式工具、应用程序接口和协议.技术勘误1 | Information technology - JPEG 2000 image coding system: Interactivity tools, APIs and protocols; Technical Corrigendum 1 |
| ISO/IEC 15444-9-2005 | 信息技术.JPEG 2000图像编码系统.交互工具、应用程序接口和协议 | Information technology - JPEG 2000 image coding system: Interactivity tools, APIs and protocols |
| ISO/IEC 16500-7-1999 | 信息技术 通用数字音频-可视系统 第7部分:基本安全工具 | Information technology - Generic digital audio-visual systems - Part 7: Basic security tools |
| ISO/IEC 18021-2002 | 信息技术.在客户机/服务器模式中数据库通信管理的移动工具用户接口 | Information technology - User interfaces for mobile tools for management of database communications in a client-server model |
| ISO/IEC 18036-2003 | 信息技术.万维网浏览器工具条用图标符号和功能 | Information technology - Icon symbols and functions for World Wide Web browser toolbars |
| ISO/IEC TR 14471-2007 | 信息技术.软件工程.CASE工具的采用指南 | Information technology - Software engineering - Guidelines for the adoption of CASE tools |
| ISO/IEC TR 21000-11-2004 | 信息技术.多媒体框架(MPEG-21).第11部分:持久相关技术的评价工具 | Information technology - Multimedia framework (MPEG-21) - Part 11: Evaluation Tools for Persistent Association Technologies |
| ISO/TR 27609-2007 | 手持工具的振动.研磨机振动测量方法.系列试验评估 | Vibration in hand-held tools - Vibration measurement methods for grinders - Evaluation of round-robin test |
| ISO/TS 13399-100-2004 | 切削工具数据表示和交换.第100部分:参考字典的定义、原则和方法 | Cutting tool data representation and exchange - Part 100: Definitions, principles and methods for reference dictionaries |
| ISO/TS 13399-2-2005 | 切削工具数据表示和交换.第2部分:切削项目的参考字典 | Cutting tool data representation and exchange - Part 2: Reference dictionary for the cutting items |
| ISO/TS 13399-3-2007 | 切削工具数据表示和交换.第3部分:工具项用参考字典 | Cutting tool data representation and exchange - Part 3: Reference dictionary for tool items |
| ISO/TS 13399-4-2007 | 切削工具数据表示和交换.第4部分:自适应项的参考字典 | Cutting tool data representation and exchange - Part 4: Reference dictionary for adaptive items |
| ISO/TS 13399-5-2007 | 切削工具数据表示和交换.第5部分:汇编词条参考字典 | Cutting tool data representation and exchange - Part 5: Reference dictionary for assembly items |
| ISO/TS 13399-50-2007 | 切削工具数据表示和交换.第50部分:参考系统和一般概念用参考字典 | Cutting tool data representation and exchange - Part 50: Reference dictionary for reference systems and common concepts |
| ISO/TS 13399-60-2007 | 切削工具数据表示和交换.第60部分:连接系统用参考字典 | Cutting tool data representation and exchange - Part 60: Reference dictionary for connection systems |
| ISO/TS 17104-2006 | 螺纹紧固件的旋转刀具.液压推动工具.性能试验方法 | Rotary tool for threaded fasteners - Hydraulic impulse tools - Performance test method |
| ISO/TS 21108-2005 | 手持式动力工具.脉冲扳手.电插座接口的尺寸和公差 | Hand-held power tools - Impulse wrenches - Dimensions and tolerances of interface to power socket |
| ISO/TS 28923-2007 | 农业机械.电力传输移动部件防护装置.用工具开的防护装置 | Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool |
| ISO/TS 28924-2007 | 农业机械.电力传输移动部件防护装置.不用工具开的防护装置 | Agricultural machinery - Guards for moving parts of power transmission - Guard opening without tool |
| 编号 | 中文名称 | 英文名称 |