法国工具标准(NF tool standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号 中文名称 英文名称
NF A04-302-1984 钢铁产品.用断裂法对奥氏体晶粒放大倾向和对工具钢淬火深度的测定(谢佛特氏试验) (Iron and steel. Determination using fracture test pieces of the austenitic grain growth tendency and of the hardness depth in tool steels (shepherd test).)
NF A35-590-1992 钢铁产品.工具钢 (IRON AND STEEL. TOOL STEELS.)
NF A45-103-1987 铁和钢.工具钢轧制钢棒和扁钢.尺寸和公差 (Iron and steel. Rolled tools steel bars and flat. Dimensional tolerances.)
NF A45-104-1987 冶金产品.工具钢锻造的棒钢和扁钢.尺寸公差 (Iron and steel. Forged tool steel bars and flats. Dimensional tolerances.)
NF A92-118-1993 搪瓷.搪瓷器皿耐碰撞测定.焊接工具试验 (VITREOUS AND PORCELAIN ENAMELS. DETERMINATION OF THE RESISTANCE OF ENAMELLED ARTICLES TO IMPACT. PISTOL TEST.)
NF B54-500-1953 木材.工具柄.质量分类 (WOOD. TOOL HANDLES. QUALITATIVE CLASSIFICATION.)
NF B54-501-1953 木材.工具柄.园艺用耙柄 (WOOD. TOOL HANDLES. GARDEN RAKE HANDLES.)
NF B54-502-1953 木材.工具柄.锄柄 (WOOD. TOOL HANDLES. HOE HANDLES.)
NF B54-503-1953 木材.工具柄.带套筒的草叉柄 (WOOD. TOOL HANDLES. HANDLES OF HAYFORKS,SLEEVE TYPE.)
NF B54-504-1953 木材.工具柄.带曲柄颈的草叉柄 (WOOD. TOOL HANDLES. HANDLES OF HAYFORKS,TONGUE TYPE.)
NF B54-505-1953 木材.工具柄.带套筒铲叉柄、锄柄 (WOOD. TOOL HANDLES. HANDLES OF GARDEN FORKS,SPADE HANDLES,SLEEVE TYPE.)
NF B54-506-1953 木材.工具柄.长柄铁锹的柄 (WOOD. TOOL HANDLES. SPADE HANDLES.)
NF B54-507-1953 木材.工具柄.带曲柄颈的铲叉柄、锄柄 (WOOD. TOOL HANDLES. HANDLES OF GARDEN FORKS,SPADE HANDLES,TONGUE TYPE.)
NF B54-508-1953 木材.工具柄.带插筒的粪叉柄 (WOOD. TOOL HANDLES. HANDLES OF MANURE FORKS,SLEEVE TYPE.)
NF B54-509-1953 木材.工具柄.带曲柄颈的粪叉柄 (WOOD. TOOL HANDLES. HANDLES OF MANURE FORKS,TONGUE TYPE.)
NF B54-510-1953 木材.工具柄.带插筒的石子或道渣叉柄 (WOOD. TOOL HANDLES. HANDLES OF PEBBLE AND BALLAST FORKS,SLEEVE TYPE.)
NF B54-511-1953 木材.工具柄.带曲柄颈的石子或道渣叉柄 (WOOD. TOOL HANDLES. HANDLES OF PEBBLE AND BALLAST FORKS,TONGUE TYPE.)
NF B54-512-1953 木材.工具柄.斧柄、锄柄、镐柄 (WOOD. TOOL HANDLES. HANDLES OF WEEDING HOES,COMBINED HOES/FORKS,HOES.)
NF B54-513-1953 木材.工具柄.带椭圆眼的斧柄 (WOOD. TOOL HANDLES. OVAL EYED PICK HANDLES.)
NF B54-514-1953 木材.工具柄.带圆眼的斧柄 (WOOD. TOOL HANDLES. ROUND EYED PICK HANDLES.)
NF B54-515-1953 木材.工具柄.钻子柄 (WOOD. TOOL HANDLES. AUGER HANDLES.)
NF B54-516-1954 木材.工具柄.刀柄 (WOOD. TOOL HANDLES. FILE HANDLES.)
NF B54-517-1953 木材.工具柄.鹅颈铰柄 (WOOD. TOOL HANDLES. GOOSENECK SHOVEL HANDLES.)
NF B54-521-1953 木材.工具柄.木制锤柄 (WOOD. TOOL HANDLES. DOGWOOD SLEDGEHAMMER HANDLES.)
NF B54-522-1953 木材.工具柄.木制手锤柄 (WOOD. TOLL HANDLES. HAND HAMMER HANDLES MADE OF DOGWOOD.)
NF C18-400-1994 在交流电1000V和直流电1500V的情况下带电作业用的手工工具 (Hand tools for live working up to 1000 A.C. And 1500 V D.C.)
NF C18-400/A2-2003 交流1000V和直流1500V以下带电作业用手持工具 (Hand tools for live working up to 1 000 V a.c. and 1 500 V d.c.)
NF C18-402-1996 带电作业用绝缘棒和万能工具配件 (Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working.)
NF C18-403-2002 带电作业.工具,设备和器械术语 (Live working - Terminology for tools, equipment and devices.)
NF C75-100-1982 手提式电动工具.第1部分:一般规则 (Hand-held motor operated tools. Part 1 : general requirements.)
NF C75-200-1998 可移动式自动操作电气工具的安全.第1部分:一般要求 (Safety of transportable motor-operated electric tools. Part 1 : general requirements.)
NF C75-300-1996 手持电动工具的安全.第1部分:一般要求 (SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 50 144-1).)
NF C75-301-1997 手提式电动工具安全性.第2-1部分:电钻的特殊要求 (Safety of hand-held electric motor operated tools. Part 2-1 : particular requirements for drills.)
NF C75-302-1997 手提式电动工具安全性.第2-2部分:电动旋具和电动套筒扳手的特殊要求 (Safety of hand-held electric motor operated tools. Part 2-2 : particular requirements for screwdrivers and impact wrenches.)
NF C75-304-1997 手提式电动工具安全性.第2-4部分:喷砂机的特殊要求 (Safety of hand-held electric motor operated tools. Part 2-4 : particular requirements for sanders.)
NF C75-305-1997 手提式电动工具的安全.第2-5部分:圆盘锯和圆盘刀 (Safety of hand-held electric motor operated tools. Part 2-5 : particular requirements for circular saws and circular knives.)
NF C75-306-1997 手提式电动工具安全性.第2-6部分:电锤的特殊要求 (Safety of hand-held electric motor operated tools. Part 2-6 : particular requirements for hammers.)
NF C75-307-1997 手提式电动工具安全性.第2-7部分:电喷枪的特殊要求 (Safety of hand-held electric motor operated tools. Part 2-7 : particular requirements for spray guns.)
NF C75-308-1997 手提式电动工具安全性.第2-8部分:电动金属皮剪刀和下料剪的特殊要求 (Safety of hand-held electric motor operated tools. Part 2-8 : particular requirements for sheet metal shears and nibblers.)
NF C75-309-1997 手提式电动工具安全性.第2-9部分:电动攻丝机的特殊要求 (Safety of hand-held electric motor operated tools. Part 2-9 : particular requirements for tappers.)
NF C75-310-1997 手提式电动工具安全性.第2-10部分:电动细锯的特殊要求 (Safety of hand-held electric motor operated tools. Part 2-10 : particular requirements for jig saws.)
NF C75-311-1997 手提式电动工具安全性.第2-11部分:战刀形手持电动锯和双面往复式锯的特殊要求 (SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS. PART 2-11 : PARTICULAR REQUIREMENTS FOR SABRE SAWS AND DOUBLE BLADE RECIPROCATING SAWS. (EUROPEAN STANDARD EN 50 144-2-11).)
NF C75-314-1997 手提式电动工具安全性.第2-14部分:手持电动刨的特殊要求 (Safety of hand-held electric motor operated tools. Part 2-14 : particular requirements for planers.)
NF C75-315-2000 手提式电动工具安全性.第2-15部分:树篱修剪机的特殊要求 (Safety of hand-held electric motor operated tools - Part 2-15 : particular requirements for hedge trimmers.)
NF C91-014-1-2001 电磁兼容性.家用器具、电动工具和类似电器的要求.第1部分:辐射 (Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : emission.)
NF C91-014-1/A1-2002 电磁兼容性.家用电器、电动工具和类似电器的性能要求.第1部分:发射 (Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : emission.)
NF C91-014-1/A2-2003 电磁兼容性.家用器具、电动工具和类似电器的要求.第1部分:辐射 (Electromagnetic compatibility - Requirements for household appliances, electric tool and similar apparatus - Part 1 : emission.)
NF C91-014-2-1997 电磁兼容性(EMC).家用电器,电动工具和类似设备的要求.第2部分:抗扰性.产品系列标准 (Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Part 2 : immunity. Product family standard.)
NF C91-014-2/A1-2002 电磁兼容性.家用设备、电动工具和类似器具的要求.第2部分:抗干扰性.产品系列标准 (Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2 : immunity - Product family standard.)
NF C93-400-15-8-1997 电子设备用机电元件.基本试验过程和测量方法.第15部分:触点和终端的机械试验.第8节:试验15h:对所用工具有阻 (Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 15 : mechanichal tests on contacts and terminations. Section 8 : test 15h : contact retention system resistance to tool application.)
NF C93-470-8-1997 电子设备的电机元件.基本试验过程和测量方法.第15部分:接点和终端的机械试验.第8节:试验15H:对工具应用的接 ()
NF E26-030-1981 起重工具用短环和特短环校准负载链.表面硬化链 (SHORT-LINK AND VERY SHORT-LINK CALIBRATED LOADING CHAINS FOR HOISTING BEAR. CHAINS WITH A HERDENED SURFACE.)
NF E29-577-1978 管道.工具和气动机械用的螺纹连接管 (PIPEWORKS. SCREWED CONNECTIONS FOR PNEUMATIC TOOLS AND MACHINES.)
NF E29-791-2002 可移动储气瓶.乙炔蓄电池运载工具的灌装条件 (Transportable gas cylinders - Filling conditions for acetylene battery vehicles.)
NF E51-200-1981 压缩机,气压工具和机械.常用词汇 (Compressors, pneumatic tools and machines. General vocabulary.)
NF E51-201-1981 压缩机.工具和气压机械.压缩机词汇 (Compressors, pneumatic tools and machines. Vocabulary of compressors.)
NF E51-202-1992 压缩机、风动工具和机械.词汇.风动工具和机械 (Compressors, pneumatic tools and machines. Vocabulary. Pneumatic tools and machines.)
NF E51-361-1995 螺纹紧固件用旋转式气动装配工具.性能试验 (Rotary tools for threaded fastners. Performance test method.)
NF E60-021-1997 机床切削工具.速度和走刀量 (Machine-tools. speeds and feeds.)
NF E60-023-1996 人工换刀7:24锥度工具锥柄 (7/24 tapers for tool skanks for manual changing.)
NF E60-096-1998 机械工具试验规程.第4部分:数字型控制机械工具循环试验 (TEST CODE FOR MACHINE-TOOLS. PART 4 : CIRCULAR TESTS FOR NUMERICALLY CONTROLLED MACHINE TOOLS.)
NF E60-097-1998 实验规则和机械工具.第2部分:数控轴位置的精度和重复性的测定 (Test code for machine tools. Part 2 : determination of accuracy and repeatability of positioning of numerically controlled axes.)
NF E60-134-1-2000 机械工具.冲模放电机器的试验条件.术语和精度试验.第1部分:单柱机 (Machines tools - Test conditions for die sinking electro-discharge machines (EDM) - Terminology and testing of accuracy - Part 1 : single column machines (cross slide table type and fixed table type).)
NF E60-134-2-2000 机械工具.冲模放电机器的试验条件.术语和精度试验.第2部分:双柱机 (Machines tools - Test conditions for die sinking electro-discharge machines (EDM) -Terminology and testing of the accuracy - Part 2 : two column machines (slide-head type and cross-slide table type).)
NF E60-172-9-2001 组合加工中心机床的试验条件.第9部分:工具和垫板转换的操作时间的评价 (Test conditions for machining centres - Part 9 : evaluation of the operating times of tool change and pallet change.)
NF E62-110-1997 车床切削工具.轴头和面板.可互换性尺寸.第2部分:凸轮锁型 (Machine-tools. Spindle noses and face plates . Sizes for interchangeability. Part 2 : camlock type.)
NF E62-208-1997 机床切削工具结构用标准化构件.圆柱用翅基 (Modular units for machine-tools construction. Wing base for columns.)
NF E62-209-1997 机床切削工具结构用标准化构件.安装多轴头用榫舌驱动和法兰 (Modular units for machines-tools construction. Tenon drive and flanges for mounting multi-spindle heads.)
NF E62-522-1977 杆传动带7/24锥度工具用外锥度为7/24转接器 (REDUCTION SLEEVES WITH TENON DRIVE WITH EXTERNAL AND INTERNAL 7/24 TAPER.)
NF E62-528-1966 带杆的莫氏锥度工具用外锥度为7/24转接器 (REDUCTION SLEEVES WITH EXTERNAL 7/24 TAPER FOR TOOLS WITH TANGED MORSE TAPER SHANKS.)
NF E62-541-1984 工具自动变换工具用的连接锥.锥体N度40,45,50的7/24锥度工具柄的拉制接头 (Tool shank taper rate 7/24 for automatic tool changer. Retention knobs for shanks no 40, 45, 50.)
NF E62-550-1993 锥度为7/24的自动更换工具用的工具手柄.圆锥形主轴突出部分 (7/24 tapers for tool shanks for automatic changing. Taper for spindle noses.)
NF E63-052-1968 压力机配套工具.柱上的环形件 (PRESS TOOLS. PILLAR KEEPER RING.)
NF E63-053-1974 压力机配套工具.中间定位柱的法兰盘 (PRESS TOOLS.FLANGE FOR MIDDLE LOCATING PILLAR.)
NF E63-054-1974 压力机配套工具.连接导环 (PRESS TOOLS.PILLAR GUIDE BUSH.)
NF E63-055-1974 压力机配套工具.安装在底座上的连接导环 (PRESS TOOLS.PILLAR GUIDE BUSH FOR MOUNTING IN BOLSTER.)
NF E63-056-1974 压力机配套工具.密封导环 (PRESS TOOLS.FIXED GUIDE BUSH.)
NF E63-057-1974 压力机配套工具.连接环的止动法兰盘 (PRESS TOOLS.RETAINING FLANGE FOR GUIDE BUSH.)
NF E63-060-1997 压制用工具.抗模板.通用规范 (TOOLS FOR PRESSING. WEAR PLATES. GENERAL SPECIFICATIONS.)
NF E63-076-1974 压力机配套工具.导向部件.自动润滑油环 (PRESS TOOLS - GUIDING ELEMENTS - SELF-OILING RINGS.)
NF E63-080-2003 冲压工具.冲模 (Tools for pressing - Matrixes.)
NF E63-081-1984 压力机配套工具.各种型孔模型 (PRESS TOOLS. DIES FOR SHAPE HOLES.)
NF E63-090-1998 压力工具.压实件 (TOOLS FOR PRESSING. DIE SETS.)
NF E63-100-2002 冲压工具.有圆柱头和直杆或者缩径柄的冲头 (Tools for pressing - Punches with cylindrical head and straight or reduced shank.)
NF E63-101-1973 压力机配套工具.有凸缘的阳模凹座 (PRESS TOOLS-COLLAR PUNCH HOUSINGS.)
NF E63-102-1-2001 压印工具.球锁式冲压.第1部分:轻型球锁式冲压 (Tools for pressing - Ball-lock punches - Part 1 : ball-lock punches for light duty.)
NF E63-109-1984 压力机配套工具.60°锥形头冲切模 (Press tools. Punches with 60 degrees conical head.)
NF E63-113-1990 冲压工具.带凸缘冲头矩形固定板和挡板 (PRESS TOOLS. RECTANGULAR RETAINERS AND PERCUSSION PLATE FOR FLANGED PUNCHES. TOP FIXING.)
NF E63-114-1990 冲压工具.带凸缘冲头正方形固定板和挡板 (PRESS TOOLS. SQUARE RETAINERS AND PERCUSSION PLATES FOR FLANGED PUNCHES. TOP FIXING.)
NF E63-115-1991 压机配套工具.带60°锥形头和凸肩的圆冲头 (TOOLS FOR PRESSING. ROUND PUNCHES WITH 60 DEGREES C CONICAL HEAD AND REDUCED SHANK.)
NF E63-119-1984 压力机配套工具.阳模.定义.阳模的主要型号.术语 (PRESS TOOLS. PUNCHES. DEFINITIONS OF PRINCIPAL TYPES OF PUNCH. TERMINOLOGY.)
NF E63-120-1976 压力机配套工具.滚珠导套.滚珠导套的安装 (PRESS TOOLS. BALL GUIDES. BALL GUIDE MOUNTING.)
NF E63-123-1983 压力机配套工具.滚珠导套和滑动导套.凸缘肩轴衬和螺纹凸肩环 (Press tools. Guide bushing. Shouldered clamping and shouldered threaded bushes.)
NF E63-124-1976 压力机配套工具.滚珠导套.滚珠轴承隔离套 (PRESS TOOLS. BALL GUIDES. BALL CAGE.)
NF E63-125-1976 压力机配套工具.滚珠导套.配件 (PRESS TOOLS. BALL GUIDES. ACCESSORIES.)
NF E63-131-2-1996 压力工具.气压弹簧.第2部分:附属规范 (Tools for pressing. Gas springs. Part 2 : specification of accessories.)
NF E63-132-1991 压机配套工具.调整杆.尺寸 (TOOLS FOR PRESSING. RING BOLT. DIMENSIONS.)
NF E63-134-1992 压制工具.合成橡胶压力弹簧.第1部分:一般规范 (Tools for pressing. Elastomer pressure springs. Part 1 : general specification.)
NF E63-135-1992 压制工具.合成橡胶压力弹簧.第2部分:附件的规范 (Tools for pressing. Elastomer pressure springs. Part 2 : specification of accessories.)
NF E63-136-1992 压制工具.矩形截面压力弹簧.骨架尺寸和色彩编码 (Tools for pressing. Compression springs with rectangular section. Housing dimensions and colour coding.)
NF E63-137-1995 冲压工具.中压预压缩装置.一般规范 (PRESS-TOOLS. PRECOMPRESSED ASSEMBLIES FOR MEDIUM RATE. GENERAL SPECIFICATIONS.)
NF E63-141-1992 压力工具.弹簧拆卸器 (TOLLS FOR PRESSING. SPRING EJECTOR.)
NF E63-376-2002 铸模用工具.铸模基座.圆形定位元件和垫片 (Tools for moulding - Mould bases - Round locating elements and spacers.)
NF E63-502-1995 铸造和压力工具.机械薄板.第一部分:机械压力薄板.选矿器和固定物 (Tools for pressing and moulding. Machined plates. Part 1 : machined plates for press tools, jigs and fixtures.)
NF E63-509-2-2001 铸模工具.定位环状物.第2部分:在小型或中型模子中无镶嵌隔热板的定位环状物.C型和D型 (Tools for moulding - Locating rings - Part 2 : locating rings for mounting with thermal insulating sheets in small or medium moulds - Types C and D.)
NF E63-510-1994 模压工具.浇道套.尺寸 (Tools for moulding. Sprue bushes. Dimensions.)
NF E63-516-1991 铸造工具.中心套筒 (Tools for moulding. Centring sleeves.)
NF E63-518-1992 模压工具.支承柱 (Tools for moulding. Support pillars.)
NF E63-521-2000 注模工具.压缩元件和注模和冲压注模.术语和符号 (Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols.)
NF E63-522-2001 模制工具.喷模用热绝缘薄板材 (Tools for moulding - Thermal insulating sheets for injection moulds.)
NF E64-114-1986 木材加工机械.摆动工具开榫机.术语 (WOODWORKING MACHINES. MORTISING MACHINES WITH OSCILLATING TOOL ACTION. NOMENCLATURE.)
NF E64-601-1-1998 木材加工机械的安全.带有旋转工具的单边制模机械.第1部分:单转轴垂直制模机(欧洲标准 EN 848-1) (Safety of woodworking machines - One side moulding machines with rotating tool - Part 1 : single spindle vertical moulding machines.)
NF E64-601-1/A1-2001 木材加工机械的安全.带有旋转工具的单边注模机器.第1部分:单心轴垂直注模机 (Safety of woodworking machines - One side moulding machines with rotating tool - Part 1 : single spindle vertical moulding machines.)
NF E65-100-1-2000 手持非电动工具.安全要求.第1部分:非螺纹机器紧固件的组件动力工具 (Hand-held non-electric power tools - Safety requirements - Part 1 : assembly power tools for non-threaded mechanical fasteners.)
NF E65-100-10-2000 手持非电动工具.安全要求.第10部分:压缩动力工具 (Hand-held non electric power tools - Safety requirements - Part 10 : compression power tools.)
NF E65-100-11-2000 手持非电动工具.安全要求.第11部分:毛坯下料机和剪切机 (Hand-held non-electric power tools - Safety requirements - Part 11 : nibblers and shears.)
NF E65-100-12-2000 手持非电动工具.安全要求.第12部分:小型环形摆动往复锯 (Hand-held non-electric power tools - Safety requirements - Part 12 : small circular, small oscillating and reciprocating saws.)
NF E65-100-13-2000 手持非电动工具.安全要求.第13部分:紧固工具 (Hand-held non-electric power tools - Safety requirements - Part 13 : fastener driving tools.)
NF E65-100-2-2000 手持非电动工具.安全要求.第2部分:切割和弯折工具 (Hand-held non-electric power tools - Safety requirements - Part 2 : cutting-off and crimping power tools.)
NF E65-100-3-2000 手持非电动工具.安全要求.第3部分:钻孔机和攻丝机 (Hand-held non-electric power tools - Safety requirements - Part 3 : drills and tappers.)
NF E65-100-4-2000 手持非电动工具.安全要求.第4部分:非旋转敲击动力工具 (Hand-held non-electric power tools - Safety requirements - Part 4 : non-rotary percussive power tools.)
NF E65-100-5-2000 手持非电动工具.安全要求.第5部分:旋转敲击动力钻 (Hand-held non-electric power tools - Safety requirements - Part 5 : rotary percussive drills.)
NF E65-100-6-2000 手持非电动工具.安全要求.第6部分:螺纹紧固件组件动力工具 (Hand-held non-electric power tools - Safety requirements - Part 6 : assembly power tools for threaded fasteners.)
NF E65-100-7-2002 手持非电动工具.安全要求.第7部分:磨床 (Hand-held non-electric power tools - Safety requirements - Part 7 : grinders.)
NF E65-100-8-2001 手持非电动工具.安全要求.第8部分:打磨器和抛光器 (Hand-held non-electric power tools - Safety requirements - Part 8 : sanders and polishers.)
NF E65-100-9-2001 手持式非电动工具.安全要求.第9部分:模研磨机 (Hand-held non-electric power tools - Safety requirements - Part 9 : die grinders.)
NF E65-110-2003 手持非电动工具.噪声测量规定.工程法(2级) (Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2).)
NF E65-115-1999 声学.紧固件传动工具用噪声试验规范.工程法 (Acoustics - Noise test code for fastener driving tools - Engineering method.)
NF E66-322-1984 车床工具.带硬金属钎焊刀片的自动车刀 (Turning tools. Tools with hardmetal inserts for turning on automatic machines.)
NF E66-405-1983 空气锤工具的连接 (Shanks for pneumatic hammers.)
NF E66-500-1993 切削工具.高速钢组名称与符号 (Cutting tools. Designation of high speed steel groups.)
NF E66-502-1993 切削和研磨的基本量.第一部分:切削工具工作部分几何结构.一般术语:参照系统、工作角度、断屑台 (Basic quantities in cutting and grinding. Part 1 : geometry of the active part of cutting tools. General tems, reference systems, tool and working angles, chip breakers.)
NF E66-520-7-2000 切割工具的工作带.双工具材料.第7部分:对固态钻孔技术的应用 (Working zones of cutting tools - Couple tool-material - Part 7 : application to drilling technology on solid.)
NF E66-520-8-2000 切割工具的工作带.双工具材料.第8部分:在平面上钻孔的双工具材料方法学 (Working zones of cutting tools - Couple tool-material - Part 8 : couple tool-material methodology in drilling on plain.)
NF E66-531-1996 机床.工具手柄自动夹紧拔销 (Machine tools. Self-holding tapers for tool shanks.)
NF E66-533-1997 机床切削工具.莫氏锥度柄.带斜键的销槽 (Machine-tools. Morse taper shanks. Cotter slots with taper keys.)
NF E66-550-1-1998 带圆柱柄的工具夹.第1部分:圆柱状柄,定位镗孔.技术交货条件 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 1 : CYLINDRICAL SHANK, LOCATION BORE. TECHNICAL DELIVERY CONDITIONS.)
NF E66-550-2-1998 带圆柱柄的工具夹.第2部分:A型,特殊设计的工具夹柄 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 2 : TYPE A, SHANKS FOR TOOL HOLDERS OF SPECIAL DESIGNS.)
NF E66-550-3-1998 带圆柱柄的工具夹.第3部分:B型带矩形放射状底座的工具夹 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 3 : TYPE B WITH RECTANGULAR RADIAL SEAT.)
NF E66-550-4-1998 带圆柱柄的工具夹.第4部分:C型带矩形轴状底座的工具夹 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 4 : TYPE C WITH RECTANGULAR AXIAL SEAT.)
NF E66-550-5-1998 带圆柱柄的工具夹.第5部分:带多于一个矩形底座的D型工具夹 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 5 : TYPE D WITH MORE THAN ONE RECTANGULAR SEAT.)
NF E66-550-6-1998 带圆柱柄的工具夹.第6部分:带圆柱状底座的E型工具夹 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 6 : TYPE E WITH CYLINDRICAL SEAT.)
NF E66-550-7-1998 带圆柱柄的工具夹.第6部分:带锥形底座的F型工具夹 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 7 : TYPE F WITH TAPER SEAT.)
NF E66-550-8-1998 带圆柱柄的工具夹.第8部分:Z型,附件 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 8 : TYPE Z, ACCESSORIES.)
NF E71-001-1986 锤打和铆接工具.术语.名称 (TOOLS FOR HAMMERING,HITTING AND RIVETTING. TERMINOLOGY. NOMENCLATURE.)
NF E71-213-1986 锻造和有关成套工具.冲子.尺寸.规范 (TOOLS FOR HAMMERING,HITTING AND RIVETING. WALL-DRILLS. DIMENSIONS. SPECIFICATIONS.)
NF E73-201-1996 木工工具.凿子和半圆凿 (Woodworking tools. Chisels and gouges.)
NF E73-303-1996 木工工具.木体刨 (Woodworking tools. Wooden bodied planes.)
NF E73-304-1996 木工工具.金属台刨、刨刀和盖铁 (Woodworking tools. Metal-bodied bench planes, plane cutters and cap irons.)
NF E73-521-2-2001 木工工具.安全要求.第2部分:支架固定铣刀的支架要求 (Tools for woodworking - Safety requirements - Part 2 : requirements for the shank of shank mounted milling tools.)
NF E74-300-1998 螺栓和螺母用装配工具.扳手和套筒扳手的开口.通用公差 (Assembly tools for screws and nuts. Wrench and socket openings. Tolerances for general use.)
NF E74-303-2001 螺钉和螺母组装工具.锻造的和管形套筒扳手.头部外形最大尺寸 (Assembly tools for screws and nuts - Forged and tubular socket wrenches - Maximum outside head dimensions.)
NF E74-304-2001 螺钉和螺母装配工具.双头开口扳手、双头环形扳手和多用扳手.端部最大宽度 (Assembly tools for screws and nuts - Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches - Maximum widths of heads.)
NF E74-305-2001 螺钉和螺母装配工具.双头扳手.尺寸选配 (Assembly tools for screws and nuts - Double-ended wrenches - Size pairings.)
NF E74-307-2001 螺钉和螺母用装配工具.组合扳手.扳手长度和端口最大厚度 (Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads.)
NF E74-310-2001 螺钉和螺母用装配工具.工程用双头开口扳手.扳手长度和端口厚度 (Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads.)
NF E74-311-2001 螺钉和螺母用装配工具.双头平直套筒扳手和斜口套筒扳手.扳手长度和端口厚度 (Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads.)
NF E74-313-2001 螺钉和螺母用装配工具.双头深斜口套筒扳手和改进的斜口套筒扳手.扳手长度和端口厚度 (Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads.)
NF E74-321-1998 螺钉和螺母用装配工具.十字形套筒扳手.尺寸和扭矩试验 (ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKET WRENCHES. DIMENSIONS AND TORQUE TEST.)
NF E74-322-1972 螺钉螺帽紧固工具.齿条式扳手 (ASSEMBLY TOOLS FOR SCREWS AND NUTS.RACK WRENCHES.)
NF E74-323-1972 螺钉螺帽紧固工具.开槽螺帽用单钩扳手 (ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES)
NF E74-324-2001 螺钉和螺母用装配工具.可调扳手 (Assembly tools for screws and nuts - Adjustable wrenches.)
NF E74-325-2003 螺钉和螺母用装配工具.手动转矩工具.设计一致性试验、质量一致性试验和重新校准程序的要求和试验方法 (Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure.)
NF E74-331-2003 螺钉和螺母用装配工具.内六角扳手 (Assembly tools for screws and nuts - Hexagon socket screw keys.)
NF E74-351-2002 螺钉和螺母用装配工具.一字槽头螺钉用旋具.第2部分:手工操作旋具的一般要求、刀刃长度和标记 (Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2 : general requirements, lengths of blades and marking of hand-operated screwdrivers.)
NF E74-352-1998 螺钉和螺母用装配工具.槽螺钉用旋具.第1部分:手工及机械操作用的旋具头 (Assembly tools for screws and nuts. Screwdrivers for slotted-head screws. Part 1 : tips for hand- and machine-operated screwdrivers.)
NF E74-353-1-2002 螺钉和螺母用装配工具.机动旋转头.第1部分:一字槽螺钉旋具 (Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1 : screwdriver bits for slotted head screws.)
NF E74-353-2-2002 螺钉和螺母用装配工具.机动旋转头.第2部分:十字槽螺钉旋具头 (Assembly tools for screws and nuts - Machine-operated screwdrivers bits - Part 2 : screwdriver bits for cross-recessed head screws.)
NF E74-353-3-2002 螺钉和螺母用装配工具.机动旋转头.第3部分:内六角螺钉用旋具头 (Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3 : screwdriver bits for hexagon socket screws.)
NF E74-354-2002 螺钉和螺母用装配工具.螺旋棘轮螺钉旋具头.尺寸 (Assembly tools for screws and nuts - Spiral ratchet screwdriver ends - Dimensions.)
NF E74-360-2001 螺钉和螺母用装配工具.手动和机动螺丝刀的驱动端和连接部件.尺寸和扭矩试验 (Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing.)
NF E74-361-1997 螺钉和螺母用装配工具.方形旋具.第1部分:手动套筒工具用方形旋具 (Assembly tools for screws and nuts. Driving squares. Part 1 : driving squares for hand socket tools.)
NF E74-362-1997 螺钉和螺母用装配工具.方形旋具.第2部分:电动套筒工具用方形旋具 (Assembly tools for screws and nuts. Driving squares. Part 2 : driving squares for power socket tools.)
NF E74-363-1-1997 螺钉和螺母用装配工具.方形传动套筒.第1部分:手动套筒.尺寸 (Assembly tools for screws and nuts. Square drive sockets. Part 1 : hand-operated sockets. Dimensions.)
NF E74-363-2-1997 螺钉和螺母用装配工具.方形传动套筒.第2部分:机动“冲击“套筒.尺寸 (Assembly tools for screws and nuts. Square drive sockets. Part 2 : machine-operated sockets “impact“. Dimensions.)
NF E74-363-3-2001 螺钉和螺母用组合工具.方形驱动套筒.第3部分:机器驱动套筒(无冲击).尺寸 (Assembly tools for screws and nuts - Square drive sockets - Part 3 : machine-operated sockets (“non impact“) - Dimensions.)
NF E74-365-1997 螺钉和螺母用装配工具.手动方形传动套筒扳手上的传动件.尺寸和试验 (Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests.)
NF E74-366-1997 螺钉和螺母用装配工具.手动方形传动套筒扳手上的附件.尺寸和试验 (Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests.)
NF E74-367-1995 螺钉和螺母用装配工具.机动插头扳手的方块传动加长六角插头 (Assembly tools for screws and nuts. Square drive extension hexagon insert, for power socket wrenches.)
NF E74-381-1997 螺钉和螺母用装配工具.技术规范.第1部分:手动扳手和套筒 (Assembly tools for screws and nuts. Technical specifications. Part 1 : hand-operated wrenches and sockets.)
NF E78-003-1946 工具柄.铲和圆眼镐 (TOOL FIT. ROUND HOLED SHOVELS AND PICK AXES.)
NF E90-320-1993 便携式手提电动工具.手柄振动的测量.第1部分:总则 (Hand-held portable power tools. Measurement of vibrations at the handle. Part 1 : general.)
NF E90-321-1-1995 手持便携式动力工具.测量手柄的颤动.第四部分:磨床 (Hand-held portable power tools. Measurement of vibrations at the handle. Part 4 : grinders.)
NF E90-321-2-1999 便携式手提动力工具.手柄振动测量.第8部分:轨道和随机轨道抛光及旋转砂轮机 (Hand-held portable power tools. Measurement of vibrations at the handle. Part 8 : polishers and rotary, orbital and random orbital sanders.)
NF E90-321-3-1997 便携式手提动力工具.第321部分:手柄振动测量.第3节:模具研模机 (Hand-held portable power tools. Measurement of vibrations at the handle. Part 13 : die grinders.)
NF E90-322-1-1995 便携式手提动力工具.手柄振动的测量.第2部分:凿锤和铆钉锤 (Hand-held portable power tools. Measurement of vibrations at the handle. Part 2 : chipping hammers and riveting hammers.)
NF E90-322-1/A2-2002 便携式手提动力工具.手柄振动的测量.第2部分:凿锤和铆钉锤 (Hand-held portable power tools - Measurement of vibrations at the handle - Part 2 : chipping hammers and riveting hammers.)
NF E90-322-2-1995 便携式手提动力工具.手柄振动的测量.第5部分:施工用路面轧碎机和锤 (Hand-held portable power tools. Measurement of vibrations at the handle. Part 5 : pavement breakers and hammers for construction work.)
NF E90-322-2/A2-2002 便携式手提电动工具.手柄振动的测量.第5部分:建筑工程用柏油路破碎机和錾平锤 (Hand-held portable power tools - Measurement of vibrations at the handle - Part 5 : pavement breakers and hammers for construction work.)
NF E90-322-3-1997 便携式手提电动工具.手柄振动的测量.第9部分:夯实机 (Hand-held portable power tools. Measurement of vibrations at the handle. Part 9 : rammers.)
NF E90-323-1995 便携式手提电动工具.手柄振动的测量.第3部分:岩石钻头和旋转锤 (Hand-held portable power tools. Measurement of vibrations at the handle. Part 3 : rock drills and rotary hammers.)
NF E90-323/A2-2002 便携式手提动力工具.手柄振动的测量. 第3部分:岩石钻头和旋转锤 (Hand-held portable power tools - Measurement of vibrations at the handle - Part 3 : rock drills and rotary hammers.)
NF E90-324-1995 便携式手提动力工具.手柄振动的测量.第六部分:冲击钻孔 (Hand-held portable power tools. Measurement of vibrations at the handle. Part 6 : impact drills.)
NF E90-325-1997 便携式手提动力工具.手柄振动测量.第7部分:扳手,旋具与具有冲击,冲力和刻踞齿作用的螺纹滚子 (Hand-held portable power tools. Measurement of vibrations at the handle. Part 7 : wrenches, screwdrivers and nut runners with impact, impulse or ratchet action.)
NF E90-326-1997 便携式手提动力工具.手柄振动的测量.第14部分:石工用具和针式定标器 (Hand-held portable power tools. Measurement of vibrations at the hangle. Part 14 : stone-working tools and needle scalers.)
NF E90-327-1999 便携式手提动力工具.手柄振动测量.第10部分:步冲轮廓机和剪切机械 (Hand-held portable power tools - Measurement of vibrations at the handle - Part 10 : nibblers and shears.)
NF E90-328-1999 便携式手提动力工具.手柄振动测量.第12部分:有往复作用的锯和锉及有摆动或旋转作用的锯 (Hand-held portable power tools. Measurement of vibrations at the handle. Part 12 : saws and files with reciprocating action and saws with oscillating or rotating action.)
NF F11-910-2-2003 铁路设施.制动.公共交通工具制动系统.第2部分:试验方法 (Railway applications - Braking - Mass transit brake systems - Part 2 : methods of test.)
NF F19-510-1998 铁路工具.轴箱.润滑油 (Railway applications. Axleboxes. Lubricating greases.)
NF F76-003-1975 铁路固定设备.道路用工具.枕木钳 (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. SLEEPER LIFTER.)
NF F76-006-1975 铁路固定设备.轨道设备和修理工具.轨道移动杠杆 (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. RAIL MOVING LEVER.)
NF F76-008-1975 铁路固定设备.轨道设备和修理工具.短打夯机 (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. SHORT TAMPING RAMMER.)
NF F78-001-1969 铁路运输器材.F 78运营专用工具索具.桶和客车用楔 (RAILWAY TRANSPORT EQUIPMENT. GENERAL TACKLE. CHOCKS FOR BARRELS AND VEHICLES.)
NF F79-001-1982 通用铁路设备.F 79多种用道工具信号旗.三角旗铁路用金属产品和半成品 (Railway material in general. Signal flags. Pennants.)
NF H34-015-1987 塑料包装.消费品塑料袋(工具袋和安全带袋除外)规范和试验 (PLASTIC PACKAGING. BAGS FOR CONSUMER PRODUCTS (EXCEPT CARRIER AND SHOPPING BAGS). SPECIFICATIONS AND TESTS.)
NF J83-206-2003 内河航行运载工具.客轮通道.要求和试验 (Inland navigation vessels - Gangways for passenger vessels - Requirements, tests.)
NF L09-101-1994 航空和航天.制造和检验.工具分类计划和鉴定标准 (Aircraft and space vehicles. Manufacture and control. Part number and classification plan of toolings.)
NF L54-002-076-2002 航空航天系列.电气及光学连接元件.试验方法.第506部分:工具的使用 (Aerospace series - Elements of electrical and optical connection - Test methods - Part 506 : use of tools.)
NF L54-131-1971 电接触点插拔工具 (INSERTION AND EXTRACTION TOOL FOR ELECTRICAL CONTACTS.)
NF L91-002-3-2003 航空器地面保障设备.特殊要求.第3部分:传送带运载工具 (Aircraft ground support equipment - Specific requirements - Part 3 : conveyor belt vehicles.)
NF M82-011-1987 煤矿器材和工具.煤矿器材.风扇型通风管软管道.规范 (Mining equipment. Flexible venting ducts. Ventubes of the blowing type. Specifications.)
NF M82-013-1987 煤矿器材和工具.煤矿器材.吸入型通风管软管道.规范 (MINING EQUIPMENT. FLEXIBLE VENTING DUCTS. VENTUBES OF THE SUCTION TYPE. SPECIFICATIONS.)
NF M82-237-1955 煤矿器材和工具.煤矿器材和工具.压缩空气管.变径管接头 (MINING EQUIPMENT. COMPRESSED AIR PIPES. CONICAL REDUCTION COUPLINGS.)
NF P94-430-1-2000 岩石.岩石磨耗性的测定.第1部分:使用指定工具的schratching试验 (Rock - Determination of the rock abrasiveness - Part 1 : schratching-test with a pointed tool.)
NF P94-430-2-2000 岩石.岩石磨耗性的测定.第2部分:使用旋转工具的试验 (Rock - Determination of the rock abrasiveness - Part 2 : test with a rotating tool.)
NF P98-737-1996 道路结构和维修设备.压实工具.额定压实性能 (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. COMPACTOR. RATING COMPACTION PERFORMANCES.)
NF R63-201-1985 道路车辆.汽车车库工具.测量和检验工具 (ROAD VEHICLES. GARAGE EQUIPMENT. ENGINE TESTING AND MEASURING EQUIPMENT.)
NF R63-202-2000 道路车辆.汽车车库工具.发动机RPM转速计.总规范 (Road vehicles - Garage equipment - Engine RPM tachometer - General specifications.)
NF R63-301-1984 道路车辆.汽车车库工具.推进装置几何测量设备 (ROAD VEHICLES. GARAGE EQUIPMENT. GEOMETRY CONTROL DEVICES FOR RUNNING GEAR.)
NF R63-304-1986 道路车辆.汽车车库工具.转动平台 (ROAD VEHICLES. GARAGE EQUIPMENT. SWIVEL-PLATE.)
NF R63-703-1987 道路车辆.车库工具.步数计 (ROAD VEHICLES. GARAGE EQUIPMENT. PEDOMETERS.)
NF R63-705-1982 道路车辆.汽车车库工具.自录式减速计 (ROAD VEHICLES. GARAGE EQUIPMENT. RECORDING DECELEROMETERS.)
NF R63-801-1982 道路车辆.汽车车库工具.照明灯校正设备 (ROAD VEHICLES. GARAGE EQUIPMENT. EQUIPMENT FOR CHECKING AND ADJUSTING LIGHTS.)
NF S61-509-3-2003 消防和援救用运载工具.第3部分:永久性安装设备.安全和性能 (Firefighting and rescue service vehicles - Part 3 : permanently installed equipment - Safety and performance.)
NF S61-571-1989 救护和消防的设备.液压单动器具和切割工具.特性.尺寸、功能和试验 (RESCUE AND FIRE FIGHTING EQUIPMENT. HYDRAULIC-OPERATED DOUBLE ACTING APPARATUS SPREADERS AND CUTTING TOOLS. DIMENSIONAL AND FONCTIONAL CHARACTERISTICS AND TESTS.)
NF S61-572-1989 救护和消防的设备.液压单动器具和切割工具.特性.尺寸、功能和试验 (RESCUE AND FIRE FIGHTING EQUIPMENT. HYDRAULIC-OPERATED SINGLE ACTING APPARATUS SPREADERS AND CUTTING TOOLS. DIMENSIONAL AND FONCTIONAL CHARACTERISTICS AND TESTS.)
NF S71-601-1994 救生衣和专用浮力工具.浮力工具.50N(欧洲标准EN 393) (Lifejackets and personal buoyancy aids. Buoyancy aids 50 N.)
NF S71-602-1994 救生衣和专用浮力工具.附加零件 (Lifejackets and personal buoyancy aids. Additional items.)
NF S71-604-1994 救生衣和专用浮力工具.150N救生衣 (Lifejackets and personal buoyancy aids. Lifejackets 150 N.)
NF S71-605-1994 救生衣和专用浮力工具.275N救生衣 (LIFEJACKETS AND PERSONAL BUOYANCY AIDS. LIFEJACKETS. 275 N. (EUROPEAN STANDARD EN 399).)
NF S91-130-1994 牙科用旋转器械.切割工具.第3部分:铣床用硬质合金实验室刀具 (Dental rotary instruments. Cutters. Part 3 : carbide laboratory cutters for milling machines.)
NF S94-002-1998 用于有关非活性外科植入物的工具 (Instrumentation to be used in association with non-active surgical implants. General requirements.)
NF T35-013-1992 涂料和清漆涂刷和干燥器具.涂料制备和使用工具用清洁设备的打开装置和关闭机械.设计、工作性能和测量方法 (INSTALLATIONS FOR APPLICATION AND DRYING OF PAINTS AND VARNISHES. OPEN EQUIPMENTS AND CLOSED MACHINES FOR CLEANING EQUIPMENTS FOR PREPARATION AND APPLICATION OF PAINTS. DESIGN,WORKING,CHARACTERISTICS AND MEASUREMENT METHODS.)
NF T35-504-3-2001 涂料和有关产品使用前钢衬底的制备.表面制备方法.第3部分:手工工具和电动工具清洗 (Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3 : hand- and power-tool cleaning.)
NF T60-509-1990 润滑剂、工业润滑油和类似产品(L级).分类.第11部分:P类(风动工具) (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 11 : FAMILY P (PNEUMATIC TOOLS).)
NF U14-505-1997 农用拖拉机和全套工具.四点刚性联结器规范 (Agricultural tractors and implements. Four-point rigid hitch. Specifications.)
NF U34-136-2000 林业机械.动力杆式修枝锯的安全要求和试验.第2部分:带有背装电源装置的切削工具 (Machinery for forestry - Safety requirements and testing for pole mounted powered pruners - Part 2 : units for use with a back pack power unit.)
NF X50-711-1994 商品的标准化过程.工具目录和描述 (The standardization process in firm. Inventory and description of tools.)
NF Z71-357-1998 信息技术.TED.网络协议.通过电子邮件系统的应用工具软件之间的文件转换 (INFORMATION TECHNOLOGY. TED.NET PROTOCOL. FILES EXCHANGE BETWEEN APPLICATIONS BY ELECTRONIC MAIL SYSTEMS.)
NF Z82-132-2001 综合业务数字网(ISDN).电信业务中用的加密工具(SET) (Integrated Services Digital Network (ISDN) - Security tools (SET) for use within telecommunication services.)
NF Z82-502-1-2002 综合业务数字网(ISDN).安全工具(SET)程序.数字用户信令系统No.1(DSS1)协议.第1部分:协议规范 (Integrated Services Digital Network (ISDN) - Security tools (SET) procedures - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 1 : protocol specification.)
编号 中文名称 英文名称

返回