| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 4000-70-1992
| 小型变压器和扼流圈用铁芯叠片、铁芯和线圈架的产品特性图表
| Tabular layouts of article characteristics for core laminations, cores and coil formers for small transformers and chokes
|
| DIN 41300-1-1979
| 小型变压器.M、EI、SM和SE形铁芯特性数据(有微小材料浪费的EI型)
| Small transformers - Characteristic data, M, EI, SM and SE cores (EI-type with small waste of material)
|
| DIN 41307-1-1973
| 小型变压器和扼流圈用附件.EJ型固定搭接片
| Accessory parts for small transformers and chokes; fixing straps for type EI
|
| DIN 41307-2-1973
| 小型变压器和扼流圈用附件.M、EI和UI型安装角度
| Accessory parts for small transformers and chokes; fixing angles for types M, EI and UI
|
| DIN 41307-3-1981
| 小型变压器和扼流圈的附件.EI.UI和3UI型铁芯的连接片
| Accessory parts for small transformers and chokes; attachment straps for cores typ E, U and 3 U
|
| DIN 41307-4-1981
| 小型变压器附件和电抗器.UI和3UI型铁芯固定托架
| Accessory parts for small transformers and chockes; fixing brackets for cores type UI and 3UI
|
| DIN 41307-5-1981
| 小型变压器和扼流圈用附件.E、ED、EE、EF及EK型铁芯托架.印制电路、水平磁轴
| Accessory parts for small transformers and chokes; brackets for cores type E, ED, EE, EF and EK; printed circuits, magnetic axis horizontal
|
| DIN 42402-1976
| 变压器和电抗器的端子标记
| Terminal markings for power transformers and reactors
|
| DIN 42404-1985
| 小型变压器端子标记.安全绝缘变压器.可调变压器和小型扼流器
| Terminal markings for small transformers, safety isolating transformers, variable transformers and small chokes
|
| DIN 42500-1-1993
| 50Hz、50至2500kVA三相油浸式配电变压器.一般要求和对Um小于24kV变压器的要求
| Three-phase oil-immersed distribution transformers 50 Hz, 50 up to 2500 kVA; general requirements and requirements for transformers U<(Index)m> up to 24 kV; German version HD 428.1 S1:1992
|
| DIN 42500-1/A1-1996
| 50Hz、50至2500kVA三相油浸式配电变压器.第1部分:一般要求和对Um小于24kV变压器的要求.修改件1
| Three-phase oil-immersed distribution transformers 50 Hz, 50 up to 2500 kVA - Part 1: General requirements and requirements for transformers U<(Index)m> up to 24 kV; Amendment A1:1995-03; German version HD 428.1 S1/A1:1995
|
| DIN 42500-21-1995
| 最高电压36Kv以下50Hz.50至2500kVA三相交流油浸式配电变压器.第2部分:高压和/或低压端上带电缆接线盒的配电
| Three phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high voltage and/or low voltage side; section 1: General requirements; German version HD 428.2.1 S1:1994
|
| DIN 42500-3-1995
| 操作设备用最高电压不超过 36 kV 的 50Hz、50 kVA - 2500 kVA 的三相交流油浸式配电变压器.第3部分:操作设
| Three phase oil-immersed distribution transformers 50 Hz, from 50-up to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 3: Supplementary requirements for transformers with highest voltage for equipment equal to 36 kV; German version HD 428.3 S1:1994
|
| DIN 42500-4-1995
| 操作设备用最高电压不超过 36 kV 的 50Hz、50 kVA - 2500 kVA 的三相交流油浸式配电变压器.第4部分:非正弦
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA for equipment not exceeding 36 kV - Part 4: Determination of power rating of a transformer loaded with non-sinusoidal currents; German version HD 428.4 S1:1994
|
| DIN 42500-6-2003
| 最高电压不超过36Kv的设备用50Hz、50至2500kVA的三相油浸式配电变压器.第6部分:有关增压式波形槽的要求和试
| Three phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not excceeding 36 kV - Part 6: Requirements and tests concerning pressurised corrugated tanks; German version HD 428.6 S1:2002
|
| DIN 42504-1-1983
| 变压器.装有断路分接头切换或带载分接头换接的50Hz、2000-10000KVA和Um小于123KV的三相油浸变压器.性能参数
| Transformers; three-phase oil immersed type power transformers with off-circuit tapchanger or with on-load tap-changer 2000 to 10000 kVA for 50 Hz and U<(Index)m> up to 123 kV; characteristics
|
| DIN 42504-2-1971
| 分别带断路分接开关或载荷分接开关的功率变压器.2000～10000KVA绝缘等级110N以下的主要尺寸和附件
| Powertransformers with off circuit tap-changer resp. on load tap changer; main dimensions and accessories, 2000 to 10000 kVA and up to insulation class 110 N
|
| DIN 42508-1-1983
| 变压器.装有断路分接头切换或带载分接头换接的50HZ、12500-80000KVA和Um小于123KV的三相油浸变压器.性能参
| Transformers; three-phase oil immersed type power transformers with off-circuit tap-changer or with on-load tap-changer 12500 to 80000 kVA for 50 Hz and U<(Index)m> up to 123 kV; characteristics
|
| DIN 42508-3-1993
| 变压器.50Hz、123kV以下用带断路分接开关或带12500至80000kVA带负荷分接开关的三相油浸变压器.要求和附件
| Transformers; three-phase oil immersed transformers with off-circuit tap-changer or with on-load tap-changer 12500 to 80000 kVA for 50 Hz and U<(Index)m> up to 123 kV; requirements and accessories
|
| DIN 42508-4-1993
| 变压器.装有断路分接头切换或带载分接接头转换的50Hz、12500至80000kVA和Um小于123kV的三相油浸变压器.2500
| Transformers; three-phase oil immersed transformers with off-circuit tap-changer or with on-load tap-changer, 12500 to 80000 kVA for 50 Hz and U<(Index)m> 123 kV; main dimensions and weights for 25000 to 40000 kVA
|
| DIN 42513-1989
| 变压器.变压器和电抗器部件的标记
| Transformers; marking of components for transformers and reactors
|
| DIN 42523-1/A1-1996
| 50Hz、100至2500kVA干式变压器.第1部分:一般要求和对Um小于24kV变压器的要求.修改件1
| Dry-type transformers 50 Hz, 100 up to 2500 kVA - Part 1: General requirements and requirements for transformers U<(Index)m> up to 24 kV; Amendment 1:1995; German version HD 538.1 S1/A1:1995
|
| DIN 42523-2-1996
| 50Hz100至2500kVA干式变压器.第2部分:36kV设备用最高电压变压器补充规定
| Dry-type transformers 50 Hz, from 100 to 2500 kVA - Part 2: Supplementary requirements for transformers with highest voltage for equipment at 36 kV; German version HD 538.2 S1:1995
|
| DIN 42523-3-1997
| 最高电压不超过36KV设备用电阻为50Hz、电流100至2500kVA的三相，干式配电变压器.第3部分:负载无正弦电流的
| Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 3: Determination of the power rating of a transformer loaded with non-sinusoidal current; German version HD 538.3 S1:1997
|
| DIN 42534-1954
| 变压器；户内和户外套管.串联电压45KV-1000A
| Transformers; bushings for indoor and outdoor, series voltage 45 kV to 1000 A
|
| DIN 42538-1969
| 变压器；套管的安装装置
| Transformers; Fixing Arrangement for Bushings
|
| DIN 42539-1-1968
| 变压器；户内和户外型进线套管.250A至3150A用绝缘等级3N.组件
| Transformers; Bushings for Indoor and Outdoor Types; Insulation Class 3 N for 250 A to 3150 A, Assembly
|
| DIN 42539-2-1968
| 变压器；户内和户外型进线套管.250A至3150A用绝缘等级3N.单个零件
| Transformers; Bushings for Indoor and Outdoor Types; Insulation Class 3 N for 250 A to 3150 A, Single Parts
|
| DIN 42544-1991
| 变压器.直通旋塞.三通旋塞.要求
| Transformers; straight-way cocks, three-way cocks; requirements
|
| DIN 42545-1987
| 变压器.集油槽DN25.要求和试验
| Transformers; oil trap DN 25; requirements and test
|
| DIN 42547-1994
| 变压器和电抗器.铭牌和设计
| Transformers and reactors; rating plates; design
|
| DIN 42552-1992
| 变压器.油位指示器
| Transformers; oil-level-indicator
|
| DIN 42553-1986
| 变压器.防雪放气装置.注油塞
| Transformers; de-aerator with snow protection; filling nozzle
|
| DIN 42555-1975
| 变压器油位指示器
| Oil-level-indicator for transformers
|
| DIN 42558-1992
| 变压器.通气孔和排油孔的锁紧件
| Transformers; locking pieces for air vent and drain for oil
|
| DIN 42561-2-1992
| 变压器.辊轮.承载能力10吨
| Transformers; rollers; load carrying capacity 10 t
|
| DIN 42561-3-1992
| 变压器.滚子.中心距和轨距
| Transformers; rollers; center-line spacings and rail gauges
|
| DIN 42562-1-1987
| 变压器.带填料1.2至4.8公斤的硅胶吸湿器变压器.组件
| Transformers; silica gel breathers with fillings of 1,2 to 4,8 kg; assembly
|
| DIN 42562-2-1987
| 变压器.带填料1.2至4.8公斤的硅胶吸湿器变压器.零件
| Transformers; silica gel breathers with fillings of 1,2 to 4,8 kg; components
|
| DIN 42565-1951
| 电力变压器.户外装置用叶片直径350mm风扇.
| Power Transformers; Fans, Blade Diameter 350 mm, for Open-air Installation
|
| DIN 42567-1967
| 填充量1公斤的变压器用吸湿器.
| Dehydrating breathers for transformers, filling capacity 1 kg
|
| DIN 42568-1982
| 变压器.取样和排放用15和32公称内径的放出阀
| Transformers; outlet valve DN 15 and DN 32 for sampling and discharge
|
| DIN 42600-1-1973
| 50Hz仪表用变压器.绝缘等级0.5-45N（系统最高电压为0.6-52kV）.通用规范
| Instrument transformers for 50 Hz, insulation class 0,5 to 45 N (highest system voltages 0,6 to 52 kV); general directions
|
| DIN 42600-2-1983
| 50Hz、U<指数m>为0.6至52KV的仪表用变压器.U<指数m>等于0.8KV的电流互感器.主要尺寸
| Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers U<(Index)m>=0,8 kV; main dimensions
|
| DIN 42600-3-1965
| 绝缘等级为 0.5、1 N - 45 N 的 50 c/s 的仪表变压器.第3部分:最重要尺寸的绝缘等级为 10 N - 30 N 变压器
| Instrument transformers for 50 c/s, insulation class 0,5, 1 N to 45 N; voltage transformers, insulation class 10 N to 30 N, most important dimensions
|
| DIN 42600-4-1977
| 50Hz、HSV0.6-52KV的仪表用变压器.小型结构Um12KV电流互感器（支承式绝缘子）主要尺寸，户内型
| Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; currenttransformers (support-typ-insulator), HSV 12 kV, small design, main dimensions, indoor type
|
| DIN 42600-5-1977
| 50Hz、0.6-52KV的仪表用变压器.电流互感器（支承式绝缘子）Um12-36KV.大型.主要尺寸.户内型
| Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; current transformers (support-type-insulator) HSV 12 to 36 kV, large design, main dimensions, indoor type
|
| DIN 42600-7-1986
| 50Hz、Um小于52KV的仪表用变压器.电压变压器Um12KV.狭长型.主要尺寸.户内型
| Instrument transformers for 50 Hz, U<(Index)m> to 52 kV; voltage transformers U<(Index)m> 12 kV; narrow design, main dimensions, indoor type
|
| DIN 42600-8-1983
| 50Hz、Um0.6-52KV的仪表用变压器.电流互感器（支承式绝缘子）Um12和24KV.狭长型.主要尺寸.户内型
| Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers (support-type-insulators) U<(Index)m> 12 and 24 kV; narrow design, main dimensions, indoor type
|
| DIN 42600-9-1985
| 50Hz、Um0.6-52KV的仪表用变压器.电压变压器Um12和24KV.狭长型.主要尺寸.户内型
| Instruments transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; voltage transformers U<(Index)m> 12 and 24 kV; narrow design, main dimensions, indoor type
|
| DIN 42603-1985
| 仪器变压器.额定值铭牌
| Instrument transformers; rating plates
|
| DIN 43101-5-1976
| 电力牵引用机车车辆.第5部分:变压器术语
| Rolling stock for electric traction; terms for transformers
|
| DIN 43675-1-1975
| 第1部分:变压器用额定值在 400 和 3150 A 之间的连接螺栓和电压小于 60 kV 穿墙套管的矩形断面连接器
| Rectangular-section connectors for terminal studs rated between 400 and 3150 A for power transformer- and wallbushings below 60 kV
|
| DIN 43675-2-1984
| 柱螺栓用连接件.户外变压器套管的扁连接件.Um24和36KV.5和8kA
| Connectors for terminal studs; flat connectors for outdoor transformer bushings; U<(Index)m> 24 and 36 kV, 5 and 8 kA
|
| DIN 43675-5-1979
| 第5部分:变压器套管的额定为 1000 A 的终端接线柱用八角连接器
| Octagon connectors for terminal studs, rated over 10000 A, for transformer-bushings
|
| DIN 43857-3-1974
| 安装在最大额定电流可达 60 A 的无仪表变压器模压绝缘外壳的瓦时计.第3部分:单相计终端电度表盖的主要尺寸
| Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for single-phase meters
|
| DIN 43857-4-1974
| 安装在最大额定电流可达 60 A 的无仪表变压器模压绝缘外壳的瓦时计.第4部分:多相计终端电度表盖的主要尺寸
| Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for poly-phase meters
|
| DIN 43857-5-1998
| 最大额定电流在60A以下无仪表变压器的模压壳体的电度表.第5部分.端子盖的主要尺寸
| Watthour meters in moulded case without instrument transformers up to 60 A rated maximum current - Part 5: Principal dimensions for terminal cover
|
| DIN 44766-2-1981
| 电阻焊变压器；吊挂式.尺寸、特性
| Resistance welding transformers; suspension type, dimensions, characteristics
|
| DIN 44766-3-1981
| 电阻焊变压器；法兰连接的变压器；尺寸.特性
| Resistance welding transformers; transformers with flanged joints; dimensions, characteristics
|
| DIN 44767-1976
| 200A.550V电阻焊接变压器初级线圈连接装置耦合器
| Appliance Coupling for the Primary Connection of Resistance Welding Transformers, 200 A 550 V
|
| DIN EN 125200-1993
| 分规范.线性变压器用磁氧体铁芯
| Sectional specification: magnetic oxide cores for linear transformers; german version EN 125200:1991
|
| DIN EN 125400-1993
| 分规范.感应线圈和调谐变压器中的磁氧体铁芯用调节器
| Sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers; german version EN 125400:1991
|
| DIN EN 125401-1993
| 空白详细规范.感应线圈和调谐变压器中的磁氧体铁芯用调节器
| Blank detail specification: adjusters used with magnetic oxide (ferrite) cores for use in inductors and tuned transformers; german version EN 125401:1991
|
| DIN EN 2591-704-2002
| 航空航天系列.光电连接件.试验方法.第704部分:电气元件.耦合器变压器转换比测量
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 704: Electrical elements; Measurement of turns ratio on a transformer used in a coupler; German and English version EN 2591-704:2001
|
| DIN EN 50152-3-2-2001
| 铁路设施.固定装置.交流电开关的特殊要求.第3-2部分:交流牵引系统专用测量、控制和保护装置.单相电流变压器
| Railway applications - Fixed installations; Particular requirements for AC switchgear - Part 3-2: Measurement, control and protection devices for specific use in AC traction systems; Single-phase current transformers; German version EN 50152-3-2:2001
|
| DIN EN 50152-3-3-2001
| 铁路设施.固定装置.交流电开关的特殊要求.第3-3部分:交流牵引系统专用测量、控制和保护装置.单相感应电压变
| Railway applications - Fixed installations; Particular requirements for AC switchgear - Part 3-3: Measurement, control and protection devices for specific use in AC traction systems; Single-phase-inductive voltage transformers; German version EN 50152-3-3:2001
|
| DIN EN 50180 Bb.1-2005
| 充液式变压器用大于1kV小于等于36kV的250A到315KA的套管
| Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers - Constructional details of components
|
| DIN EN 50180 Bb.2-2001
| 充油变压器用1kV-36kV及250A-3.15kA衬套.结构紧固件
| Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers - Constructional details of fastening
|
| DIN EN 50180-1998
| 已充装液体的变压器用1kV以上至36kV和250A至3,15kA的套管
| Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers; German version EN 50180:1997 + Corrigendum 1998
|
| DIN EN 50181-1998
| 装液变压器除外的其它设备用电压1kV以上至36kV,电流从250A至1,25kA的插接式套管
| Plug-in type bushings above 1 kV up to 36 kV and from 250 A to 1,25 kA for equipment other than filled transformers; German version EN 50181:1997
|
| DIN EN 50216-1-2002
| 电力变压器和电抗器配件.第1部分:总则; 德文版本 EN 50216-1:2002
| Power transformer and reactor fittings - Part 1: General; German version EN 50216-1:2002
|
| DIN EN 50216-2-2002
| 电力变压器和电抗器配件.第2部分:带油枕的液体浸没式变压器和电抗器用气动和油动继电器; 德文版本 EN 50216
| Power transformer and reactor fittings - Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with conservator; German version EN 50216-2:2002
|
| DIN EN 50216-2/A1-2003
| 电力变压器和电抗器配件.第2部分:带储油箱的液浸变压器和电抗器用气体和油驱动的继电器.修改件A1
| Power transformer and reactor fittings - Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with conservator; Amendment A1; German version EN 50216-2:2002/A1:2002
|
| DIN EN 50216-3-2002
| 电力变压器和电抗器配件.第3部分:无气垫的密封液体浸没式变压器和电抗器用保护继电器; 德文版本 EN 50216-3
| Power transformer and reactor fittings - Part 3: Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion; German version EN 50216-3:2002
|
| DIN EN 50216-3/A1-2003
| 电力变压器和电抗器配件.第3部分:密封液浸式变压器和无气垫电抗器用保护继电器.修改件A1
| Power transformer and reactor fittings - Part 3: Protective relay for hermetically sealed liquid-immersed transformers and reactors without gaseous cushion; Amendment A1; German version EN 50216-3:2002/A1:2002
|
| DIN EN 50216-4-2002
| 电力变压器和电抗器配件.第4部分:基本附件(接地终端、排放和填充设备、温度计套和轮组件); 德文版本 EN 502
| Power transformer and reactor fittings - Part 4: Basic accessories (earthing terminal, drain and filling devices, thermometer pocket, wheel assembly); German version EN 50216-4:2002
|
| DIN EN 50216-5-2005
| 电力变压器和电抗器配件.第5部分:液位计、压力装置和流量指示器、压力释放装置和脱水通气装置
| Power transformer and reactor fittings - Part 5: Liquid level, pressure and flow indicators, pressure relief devices and dehydrating breathers; German version EN 50216-5:2002 + A1:2002 + A2:2005
|
| DIN EN 50216-6-2002
| 电力变压器和电抗器配件.第6部分:冷却设备.油浸变压器的可移动式散热器; 德文版本 EN 50216-6:2002
| Power transformer and reactor fittings - Part 6: Cooling equipment; Removable radiators for oil-immersed transformers; German version EN 50216-6:2002
|
| DIN EN 50216-7-2002
| 电力变压器和电抗器配件.第7部分:变压器油用电力泵; 德文版本 EN 50216-7:2002
| Power transformer and reactor fittings - Part 7: Electric pumps for transformer oil; German version EN 50216-7:2002
|
| DIN EN 50243-2003
| 充液体变压器用 24 kV、36 kV、5 kA 和 8 kA 的户外套管; 德文版本 EN 50243:2002
| Outdoor bushings for 24 kV and 36 kV and for 5 kA and 8 kA, for liquid filled transformers; German version EN 50243:2002
|
| DIN EN 50299 Berichtigung 1-2005
| 设备最高电压为72.5kV到550kV的变压器和反应器用油浸式电缆连接组件
| Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment U<(Index)m> from 72,5 kV to 550 kV; German version EN 50299:2002, Corrigenda to DIN EN 50299:2003-10
|
| DIN EN 50299-2003
| U<指数m>设备的最高电压从72.5kV-550kV的变压器和电抗器用油浸式电缆连接组件
| Oil-immersed cable connection assemblies for transformers and reactors having highest voltage for equipment U<(Index)m> from 72,5 kV to 550 kV; German version EN 50299:2002
|
| DIN EN 50329-2003
| 铁路设施.固定式装置.牵引式变压器
| Railway applications - Fixed installations - Traction transformers; German version EN 50329:2003
|
| DIN EN 50336-2002
| 不超过36kV的变压器和电抗器电缆箱用套管; 德文版本 EN 50336:2002
| Bushings for transformer and reactor cable boxes not exceeding 36 kV; German version EN 50336:2002
|
| DIN EN 50386-2004
| 液浸式变压器用1kV及以下且250 A至5 kA的套管
| Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers; German version EN 50386:2002
|
| DIN EN 50387-2004
| 液浸式变压器用1kV及以下且1.25 KA至5 kA的母线套管
| Busbar bushings up to 1 kV and from 1,25 kA to 5 kA, for liquid filled transformers; German version EN 50387:2002
|
| DIN EN 60044-5 Berichtigung 1-2005
| 仪表用变压器.第5部分:电容电压互感器.DIN EN 60044-5 (VDE 0414-44-5)-2005的技术勘误
| Instrument transformers - Part 5: Capacitor voltage transformers (IEC 60044-5:2004); German version EN 60044-5:2004, Corrigenda to DIN EN 60044-5 (VDE 0414-44-5):2005-03
|
| DIN EN 60044-8-2003
| 仪表变压器.第8部分:电子流变压器
| Instrument transformers - Part 8: Electronic current transformers (IEC 60044-8:2002); German version EN 60044-8:2002
|
| DIN EN 60076-1-2003
| 电力变压器.第1部分:总则 (IEC 60076-1:1993、修订版 + A1:1999); 德文版本 EN 60076-1:1997 + A1:2000 + A
| Power transformers - Part 1: General (IEC 60076-1:1993, modified + A1:1999); German version EN 60076-1:1997 + A1:2000 + A12:2002
|
| DIN EN 60076-10-2002
| 电力变压器.第10部分:声级测定
| Power transformers - Part 10: Determination of sound levels (IEC 60076-10:2001); German version EN 60076-10:2001
|
| DIN EN 60076-11-2005
| 电力变压器.第11部分:干式变压器
| Power transformers - Part 11: Dry-type transformers (IEC 60076-11:2004); German version EN 60076-11:2004
|
| DIN EN 60076-2-1997
| 电力变压器.第2部分:升温
| Power transformers - Part 2: Temperature rise (IEC 60076-2:1993, modified); German version EN 60076-2:1997
|
| DIN EN 60076-3-2001
| 电力变压器.第3部分:绝缘级别,露天介电试验和外部间隙
| Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air (IEC 60076-3:2000 + Corrigendum 2000); German version EN 60076-3:2001
|
| DIN EN 60076-4-2003
| 电力变压器.第4部分:闪电脉冲和开关脉冲试验指南.电力变压器和电抗器
| Power transformers - Part 4: Guide to lightning impulse and switching impulse testing; Power transformers and reactors (IEC 60076-4:2002); German version EN 60076-4:2002
|
| DIN EN 60076-5-2001
| 电力变压器.第5部分:抗短路能力
| Power transformers - Part 5: Ability to withstand short circuit (IEC 60076-5:2000); German version EN 60076-5:2000
|
| DIN EN 60296-2005
| 电工用液体.变压器和开关设备用未使用过的矿物绝缘油
| Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear (IEC 60296:2003); German version EN 60296:2004 + Corrigendum:2004
|
| DIN EN 60310-2005
| 铁路设施.铁路车辆用牵引变压器和电感器
| Railway applications - Traction transformers and inductors on board rolling stock (IEC 60310:2004); German version EN 60310:2004
|
| DIN EN 60401-3-2004
| 软磁材料制芯的术语和命名.第3部分:写入变压器和电感器磁芯制造厂产品目录中的数据格式指南
| Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor cores (IEC 60401-3:2003); German version EN 60401-3:2003
|
| DIN EN 60598-2-6-1995
| 灯具.第2部分:特殊要求.第6节:白炽灯用带插入变压器的灯具
| Luminaires - Part 2: Particular requirements; section 6: Luminaires with built-in transformers for filament lamps (IEC 60598-2-6:1994); German version EN 60598-2-6:1994
|
| DIN EN 60598-2-6/A1-1997
| 灯具.第2部分:特殊要求.第6节:白炽灯用带插入变压器或变流器的灯具
| Luminaires - Part 2: Particular requirements; section 6: Luminaires with built-in transformers or converters for filament lamps (IEC 60598-2-6:1994/A1:1996); German version EN 60598-2-6/A1:1997
|
| DIN EN 60740-1-2006
| 变压器和电感器用叠层铁芯.第1部分:机械和电气特性(IEC 60740-1-2005).德文版本 EN 60740-1-2005
| Laminations for transformers and inductors - Part 1: Mechanical and electrical characteristics (IEC 60740-1:2005); German version EN 60740-1:2005
|
| DIN EN 60852-4-1997
| 电信和电子设备用变压器和电感器的外形尺寸.第4部分:使用YEI-2型叠片的变压器和电感器
| Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations (IEC 60852-4:1996); German version EN 60852-4:1996
|
| DIN EN 61007-1998
| 电子和电信设备用变压器和感应器.测量方法和试验程序
| Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures (IEC 61007:1994, modified); German version EN 61007:1997
|
| DIN EN 61021-1-1997
| 电信和电气设备变压器和电感器叠片铁心包.第1部分:尺寸
| Laminated core packages for transformers and inductors used in telecommunication and electronic equipment - Part 1: Dimensions (IEC 61021-1:1990); German version EN 61021-1:1997
|
| DIN EN 61021-2-1997
| 电信和电气设备用的变压器和电感器的叠片铁心包.第2部分:用YEE 2 叠片铁芯的电器性能
| Laminated core packages for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Electrical characteristics for cores using YEE 2 laminations (IEC 61021-2:1995); German version EN 61021-2:1997
|
| DIN EN 61050-1994
| 空载输出电压超过1000伏的管形放电灯变压器(通称霓虹灯变压器).一般要求和安全要求
| Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements (IEC 61050:1991 + Corrigendum March:1992, modified); German version EN 61050:1994
|
| DIN EN 61203-1995
| 电工用合成有机酯.设备变压器酯维护指南
| Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment (IEC 61203:1992); German version EN 61203:1994
|
| DIN EN 61248-1-1998
| 电子和电信设备的变压器和电感器.第1部份:总规范
| Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification (IEC 61248-1:1996); German version EN 61248-1:1997
|
| DIN EN 61248-2-1998
| 电子和电信设备的变压器和电感器.第2部份:以性能批准程序为基础的信号变压器分规范
| Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure (IEC 61248-2:1996); German version EN 61248-2:1997
|
| DIN EN 61248-3-1998
| 电子和电信设备用变压器和电感器.第3部份:以性能批准程序为基础的电力变压器分规范
| Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure (IEC 61248-3:1996); German version EN 61248-3:1997
|
| DIN EN 61248-4-1998
| 电子和电信设备用变压器和电感器.第4部分:以性能批准程序为基础的开关模式供电用电力变压器分规范
| Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure (IEC 61248-4:1996); German version EN 61248-4:1997
|
| DIN EN 61248-5-1998
| 电子和电信设备用变压器和电感器.第5部分:以性能批准程序为基础的脉冲变压器分规范
| Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure (IEC 61248-5:1996); German version EN 61248-5:1997
|
| DIN EN 61248-6-1998
| 电子和电信设备用变压器和电感器.第6部分:以性能批准程序为基础的电感器分规范
| Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure (IEC 61248-6:1996); German version EN 61248-6:1997
|
| DIN EN 61248-7-1998
| 电子和电信设备变压器和电感器.第7部分:基于合格认证的HF-电感器和ZF-变压器分规范
| Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure (IEC 61248-7:1996); German version EN 61248-7:1997
|
| DIN EN 61378-1-1999
| 变频变压器.第1部分:工业用变压器
| Convertor transformers - Part 1: Transformers for industrial applications (IEC 61378-1:1997); German version EN 61378-1:1998 + Corrigendum 1998
|
| DIN EN 61378-2-2001
| 转换器变压器.第2部分:高压直流转换器(HVDC)用变压器 (IEC 61378-2:2001); 德文版本 EN 61378-2:2001
| Convertor transformers - Part 2: Transformers for HVDC applications (IEC 61378-2:2001); German version EN 61378-2:2001
|
| DIN EN 61558-2-1-1998
| 电力变压器,供电设备及类似设备的安全.第2-1部分:一般用途网络变压器的特殊要求
| Safety of power transformers, power supply units and similar - Part 2-1: Particular requirements for separating transformers for general use (IEC 61558-2-1:1997); German version EN 61558-2-1:1997
|
| DIN EN 61558-2-12-2002
| 电力变压器、供电设备及类似装置的安全性.第2-12部分:恒压变压器的特殊要求 (IEC 61558-2-12:2001); 德文版
| Safety of power transformers, power supply units and similar devices - Part 2-12: Particular requirements for constant voltage transformers (IEC 61558-2-12:2001); German version EN 61558-2-12:2001
|
| DIN EN 61558-2-13-2000
| 电力变压器、电源装置及类似设备的安全.第2-13部分:通用自耦变压器的特殊要求
| Safety of power transformers, power supply units and similar devices - Part 2-13: Particular requirements for auto-transformers for general use (IEC 61558-2-13:1999); German version EN 61558-2-13:2000
|
| DIN EN 61558-2-15-2001
| 电力变压器、供电装置和类似件设备的安全性.第2-15部分:医疗场地供电用绝缘变压器的特殊要求 (IEC 61558-2-
| Safety of power transformers, power supply units and similar - Part 2-15: Particular requirements for isolating transformers for the supply of medical locations (IEC 61558-2-15:1999, modified); German version EN 61558-2-15:2001
|
| DIN EN 61558-2-17-1998
| 电力变压器、供电设备及类似设备的安全性.第2-17部分:开关式供电安全变压器特殊要求
| Safety of power transformers, power supply units and similar - Part 2-17: Particular requirements for safety isolating transformers for switch mode power supplies (IEC 61558-2-17:1997); German version EN 61558-2-17:1997
|
| DIN EN 61558-2-19-2001
| 电力变压器、供电设备及类似设备的安全性.第2-19部分:扰动衰减变压器特殊要求
| Safety of power transformers, power supply units and similar devices - Part 2-19: Particular requirements for perturbation attenuation transformers (IEC 61558-2-19:2000); German version EN 61558-2-19:2001
|
| DIN EN 61558-2-2-1998
| 电力变压器、供电设备及类似设备的安全性.第2-2部分:控制变压器特殊要求
| Safety of power transformers, power supply units and similar - Part 2-2: Particular requirements for control transformers (IEC 61558-2-2:1997); German version EN 61558-2-2:1998 + Corrigendum 1998-02
|
| DIN EN 61558-2-20-2001
| 电力变压器、供电装置和类似装置的安全性.第2-20部分:小型电抗器特殊要求
| Safety of power transformers, power supply units and similar devices - Part 2-20: Particular requirements for small reactors (IEC 61558-2-20:2000); German version EN 61558-2-20:2000
|
| DIN EN 61558-2-23-2001
| 电力变压器、供电装置和类似装置的安全性.第2-23部分:施工工地变压器特殊要求
| Safety of power transformers, power supply units and similar devices - Part 2-23: Particular requirements for transformers for construction sites (IEC 61558-2-23:2000); German version EN 61558-2-23:2000
|
| DIN EN 61558-2-3-2000
| 电力变压器、电源装置及类似设备的安全.第2-3部分:燃气及燃油燃烧器用点火变压器的特殊要求
| Safety of power transformers, power supply units and similar devices - Part 2-3: Particular requirements for ignition transformers for gas and oil burners (IEC 61558-2-3:1999); German version EN 61558-2-3:2000
|
| DIN EN 61558-2-4-1998
| 电力变压器安全性.供电设备及类似设备.第2-4部分:普通隔离变压器特殊要求
| Safety of power transformers, power supply units and similar - Part 2-4: Particular requirements for isolating transformers for general use (IEC 61558-2-4:1997); German version EN 61558-2-4:1997
|
| DIN EN 61558-2-5-1998
| 电力变压器安全性.供电设备及类似设备.第2-5部分:电动剃须刀插座变压器和电动剃须刀插座组件特殊要求
| Safety of power transformers, power supply units and similar - Part 2-5: Particular requirements for control transformers (IEC 61558-2-5:1997); German version EN 61558-2-5:1998
|
| DIN EN 61558-2-5/A11-2005
| 电力变压器、供电设备及类似设备的安全.第2-5部分:剃须刀变压器和剃须刀电源装置的特殊要求
| Safety of power transformers, power supply units and similar - Part 2-5: Particular requirements for shaver transformers and shaver supply units; German version EN 61558-2-5:1998/A11:2004
|
| DIN EN 61558-2-6-1998
| 电力变压器安全性.供电设备及类似设备.第2-6部分:普通安全变压器特殊要求
| Safety of power transformers, power supply units and similar - Part 2-6: Particular requirements for safety isolating transformers for general use (IEC 61558-2-6:1997); German version EN 61558-2-6:1997
|
| DIN EN 61558-2-7-1998
| 电力变压器安全性.供电设备及类似设备.第2部分:玩具用变压器特殊要求
| Safety of power transformers, power supply units and similar - Part 2-7: Particular requirements for transformers for toys (IEC 61558-2-7:1997, modified); German version EN 61558-2-7:1997
|
| DIN EN 61558-2-7/A11-2003
| 电力变压器、供电设备及类似设备安全性.第2-7部分:玩具变压器特殊要求.修改件A11
| Safety of power transformers, power supply units and similar - Part 2-7: Particular requirements for transformers for toys; Amendment A11; German version EN 61558-2-7/A11:2002
|
| DIN EN 61558-2-8-1999
| 电力变压器安全性.供电设备及类似设备.第2-8部分:铃和钟变压器的特殊要求
| Safety of small power transformers, power supply units and similar - Part 2-8: Particular requirements for bell and chime transformers (IEC 61558-2-8:1998); German version EN 61558-2-8:1998
|
| DIN EN 61558-2-9-2003
| 电力变压器、供电设备及类似设备安全性.第2-9部分:Ⅲ类手提钨丝灯变压器特殊要求
| Safety of power transformers, power supply units and similar products - Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2002); German version EN 61558-2-9:2003
|
| DIN EN 61596-1998
| 电感器和变压器用的磁氧化EP芯和相关部件.尺寸
| Magnetic oxide EP-cores and associated parts for use in inductors and transformers - Dimensions (IEC 61596:1995); German version EN 61596:1997
|
| DIN EN 61797-1-1997
| 电信和电子设备变压器和感应器.线圈架主要尺寸.第1部分:叠层铁芯线圈架
| Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores (IEC 61797-1:1996); German version EN 61797-1:1996
|
| DIN EN 61823-2003
| 机场照明和航路信用电气设备.AGL系列变压器
| Electrical installations for lighting and beaconing of aerodromes - AGL series transformers (IEC 61823:2002, modified); German version EN 61823:2003
|
| DIN EN 62041-2004
| 电力变压器、电源器件、电抗器和类似产品.EMC要求
| Power transformers, power supply units, reactors and similar products - EMC requirements (IEC 62041:2003); German version EN 62041:2003
|
| DIN EN ISO 5826-2003
| 电阻焊设备.变压器.适用于所有变压器的通用规范
| Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:1999); German version EN ISO 5826:2003
|
| DIN EN ISO 7284-1996
| 电阻焊设备.汽车工业用多点点焊的两个分立副线圈变压器专用规范
| Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry (ISO 7284:1993); German version EN ISO 7284:1996
|
| DIN IEC 60740-2-1995
| 电信和电子设备变压器和电感器铁芯片.第2部分:软磁金属材料制铁芯片最小漏磁性规范
| Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials (IEC 60740-2:1993)
|
| DIN IEC 60852-1-1990
| 电信和电子设备变压器和电感器的外形尺寸.第1部分:使用YEI-1型叠片的变压器和电感器
| Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment; part 1: transformers and inductors using YEI 1 laminations; identical with IEC 60852-1:1986
|
| DIN IEC 60852-2-1994
| 电信和电子设备用变压器和电感器的外形尺寸.第2部分:印制电路板安装用带YEx-2芯的变压器和电感器
| Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment; part 2: transformers and inductors using YEx 2 laminations for printed wiring board mounting; identical with IEC 60852-2:1992
|
| DIN IEC 60852-5-1995
| 电信和电子设备用变压器和电感器的外形尺寸.第5部分:使用C铁芯的Q系列变压器和电感器
| Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 5: Transformers and inductors using the series Q of C-cores (IEC 60852-2:1994)
|
| DIN IEC 60944-1995
| 硅酮变压器油维护指南
| Guide for the maintenance of silicone transformer liquids; identical with IEC 60944:1988
|
| DIN IEC 61186-1-1993
| 电信和电子设备用变压器和电感器.铁芯和组件命名.第1部分:叠片铁芯
| Transformers and inductors for use in telecommunication and electronic equipment; designations for cores and assemblies; part 1: laminated cores; identical with IEC 61186-1:1992
|
| DIN ISO 10656-2006
| 电阻焊接.焊枪用集成变压器(ISO 10656-1996, 包括技术勘误表 1-2000)
| Electric resistance welding - Integrated transformers for welding guns (ISO 10656:1996, including Technical Corrigendum 1:2000) |
| DIN ISO 12166-2006
| 电阻焊设备.汽车工业中多点焊接用带一个副线圈的变压器的特殊规范 (ISO 12166-1997)
| Resistance welding equipment - Particular specifications applicable to transformers with one secondary winding for multispot welding, as used in the automobile industry (ISO 12166:1997)
|
| DIN VDE 0119-206-3-2004
| 铁路车辆状况.电力和牵引系统、列车电气设备.第206-3部分:主变压器
| State of railway vehicles - Electric and traction systems, train electrical equipment - Part 206-3: Main transformers
|
| DIN VDE 0370-2-1978
| 绝缘油.变压器和开关装置用的绝缘油
| Insulating oils; Insulating oils in service in transformers and switchgear
|
| DIN VDE 0414-6-1995
| 仪表用变压器.电压电平Um52Kv以下用三相电压变压器
| Instrument transformers - Three-phase voltage transformers for voltage levels having U<(Index)m> up to 52 kV; German version HD 587 S1:1993
|
| DIN VDE 0532-14-2004
| 变压器与电抗器.第14部分:套管的外部保护火花间隙
| Transformers and reactors - Part 14: External protective spark gaps on bushings
|
| DIN VDE 0532-21-1982
| 变压器和电抗器.起动变压器和起动电抗器.[VDE 规范]
| Transformers and reactors; starting transformers and starting reactors [VDE Specification]
|
| DIN VDE 0532-222-1997
| 设备最高电压不超过36 kV的50 HZ,50至2500 kVA三相交流油浸配电变压器.第2部分:高压侧和/或低压侧带电缆接
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side; section 2: Cable boxes type 1 for use on distribution transformers meeting the requirements of HD 428.2.1 S1; German version HD 428.2.2 S1:1997
|
| DIN VDE 0532-223-1998
| 不超过36kV电压的设备用的带高压的50Hz,50至2500kVA的三相油浸配电变压器.第2部分:高压侧和/或低压侧上带
| Three-phase oil-immersed distribution transformers 50 Hz, from 50 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV - Part 2: Distribution transformers with cable boxes on the high-voltage and/or low-voltage side; Section 3: Cable boxes type 2 for use on distribution transformers meeting the requirements of HD 428.2.1; German version HD 428.2.3 S1:1998
|
| DIN VDE 0532-31-1993
| 变压器和电抗器.带负荷分接开关的选择和应用指南
| Transformers and reactors; guide to selection and application of on-load tap-changers
|
| DIN VDE 0534-1964
| 变压器的规定
| Regulations for transductors
|
| DIN VDE 0536-1977
| 油浸式变压器加载指南
| Loading guide for oil-immersed transformers
|
| DIN VDE 0552-1969
| 装有可在绕线方向横向移动集电器的可调无线电变压器的规范
| Specifications for variable-ratio transformers having current collectors which are moved transversely in the direction of the windings
|
| DIN VDE 0670-402-1988
| 电压1kV以上的交流电开关装置和控制装置.变压器电路用溶断体选用指南
| A.c. switchgear and controlgear for voltages above 1 kV; application guide for the selection of fuse-links for transformer circuits
|
| 编号 | 中文名称 | 英文名称 |
|---|