| 编号 | 中文名称 | 英文名称 | 
| DL/T 5161.3-2002
 | 电气装置安装工程 质量检验及评定规程 第3部分:电力变压器、油浸电抗器、互感器施工质量检验
 | ()
 | 
| DL/T 572-1995(2005)
 | 电力变压器运行规程
 | ()
 | 
| DL/T 573-1995(2005)
 | 电力变压器检修导则
 | ()
 | 
| DL/T 580-1995(2005)
 | 用露点法测定变压器绝缘纸中平均含水量的方法
 | ()
 | 
| DL/T 671-1999
 | 微机发电机变压器组保护装置通用技术条件
 | ()
 | 
| DL/T 684-1999
 | 大型发电机变压器继电保护整定计算导则
 | ()
 | 
| DL/T 704-1999
 | 变压器油、汽轮机油中T501抗氧化剂含量测定法(液相色谱法)
 | ()
 | 
| DL/T 722-2000
 | 变压器油中溶解气体分析和判断导则
 | ()
 | 
| DL/T 770-2001
 | 微机变压器保护装置通用技术条件
 | ()
 | 
| DL/T 848.3-2004
 | 高压试验装置通用技术条件第3部分:无局放试验变压器
 | ()
 | 
| DL/T 848.4-2004
 | 高压试验装置通用技术条件第4部分:三倍频试验变压器装置
 | ()
 | 
| DL/T 873-2004
 | 微机型发电机变压器组动态记录装置技术条件
 | ()
 | 
| DL/T 911-2004
 | 电力变压器绕组变形的频率响应分析法
 | ()
 | 
| DL/T 941-2005
 | 运行中变压器用六氟化硫质量标准
 | ()
 | 
| DL/T 984-2005
 | 油浸式变压器绝缘老化判断导则
 | ()
 | 
| DL/T 985-2005
 | 配电变压器能效及经济技术评价导则
 | ()
 | 
| GB 10235-2000
 | 弧焊变压器防触电装置
 | Arc welding transformer hazard reducing device
 | 
| GB 1094.1-1996
 | 电力变压器第1部分总则
 | Power transformers--Part 1:General
 | 
| GB 1094.11-2007
 | 电力变压器 第11部分:干式变压器
 | ()
 | 
| GB 1094.2-1996
 | 电力变压器第2部分温升
 | Power transformers--Part 2:Temperature rise
 | 
| GB 1094.3-2003
 | 电力变压器第3部分: 绝缘水平、绝缘试验和外绝缘空气间隙
 | Power transformers--Part 3: Insulation levels,dielectric tests and external clearances in air
 | 
| GB 1094.5-2003
 | 电力变压器第5部分: 承受短路的能力
 | Power transformers--Part 5: Ability to withstand short circuit
 | 
| GB 19149-2003
 | 空载输出电压超过1000V的管形放电灯用变压器(霓虹灯变压器)的一般要求和安全要求
 | Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000V(generally called neon-transformers)--General and safety requirements
 | 
| GB 19212.1-2003
 | 电力变压器、电源装置和类似产品的安全第1部分:通用要求和试验
 | Safety of power transformers,power supply units and similar--Part 1: General requirements and tests
 | 
| GB 19212.10-2007
 | 电力变压器、电源装置和类似产品的安全 第10部分:III类手提钨丝灯用变压器的特殊要求
 | ()
 | 
| GB 19212.13-2005
 | 电力变压器、电源装置和类似产品的安全第13部分:恒压变压器的特殊要求
 | Safety of power transformers, power supply units and similar devices -- Part 13: Particular requirements for constant voltage transformers
 | 
| GB 19212.14-2007
 | 电力变压器、电源装置和类似产品的安全 第14部分:一般用途自耦变压器的特殊要求
 | ()
 | 
| GB 19212.16-2005
 | 电力变压器、电源装置和类似产品的安全第16部分:医疗场所供电用隔离变压器的特殊要求
 | Safety of power transformers ,power supply units and similar devices -- Part 16: Particular requirements for isolating transformers for the supply of medical locations
 | 
| GB 19212.18-2006
 | 电力变压器、电源装置和类似产品的安全第18部分:开关型电源用变压器的特殊要求
 | Safety of power transformers, power supply units and similar - Part 18: Particular requirements for switch mode power supplies
 | 
| GB 19212.2-2006
 | 电力变压器、电源装置和类似产品的安全第2部分:一般用途分离变压器的特殊要求
 | Safety of power transformers, power supply units and similar - Part 2: Particular requirements for separating transformers for general use
 | 
| GB 19212.21-2007
 | 电力变压器、电源装置和类似产品的安全 第21部分:小型电抗器的特殊要求
 | ()
 | 
| GB 19212.24-2005
 | 电力变压器、电源装置和类似产品的安全第24部分:建筑工地用变压器的特殊要求
 | Safety of power transformers, power supply units and similar devices -- Part 24: Particular requirements for transformers for construction sites
 | 
| GB 19212.3-2006
 | 电力变压器、电源装置和类似产品的安全第3部分:控制变压器的特殊要求
 | Safety of power transformers, power supply units and similar - Part 3: Particular requirements for control transformers
 | 
| GB 19212.4-2005
 | 电力变压器、电源装置和类似产品的安全第4部分:燃气和燃油燃烧器点火变压器的特殊要求
 | Safety of power transformers,power supply units and similar devices -- Part 4: Particular requirements for ignition transformers for gas and oil burners
 | 
| GB 19212.5-2006
 | 电力变压器、电源装置和类似产品的安全第5部分:一般用途隔离变压器的特殊要求
 | Safety of power transformers, power supply units and similar - Part 5: Particular requirements for isolating transformers for general use
 | 
| GB 19212.6-2006
 | 电力变压器、电源装置和类似产品的安全第6部分:剃须刀用变压器和剃须刀用电源装置的特殊要求
 | Safety of power transformers, power supply units and similar - Part 6: Particular requirements for shaver transformers and shaver supply units
 | 
| GB 19212.7-2006
 | 电力变压器、电源装置和类似产品的安全第7部分:一般用途安全隔离变压器的特殊要求
 | Safety of power transformers, power supply units and similar - Part 7: Particular requirements for safety isolating transformers for general use
 | 
| GB 19212.8-2006
 | 电力变压器、电源装置和类似产品的安全第8部分:玩具用变压器的特殊要求
 | Safety of power transformers, power supply units and similar - Part 8: Particular requirements for transformers for toys
 | 
| GB 19212.9-2007
 | 电力变压器、电源装置和类似产品的安全 第9部分:电铃和电钟变压器的特殊要求
 | ()
 | 
| GB 19213-2003
 | 小型弧焊变压器安全要求
 | Safety requirements for portable arc welding transformers
 | 
| GB 20052-2006
 | 三相配电变压器能效限定值及节能评价值
 | The minimum allowable values of energy efficiency and the evaluating values of energy conservation for three-phase distribution transformers
 | 
| GB 2536-1990
 | 变压器油
 | Transformer oils
 | 
| GB 7000.6-1996
 | 内装变压器的钨丝灯灯具的安全要求
 | Safety requirements of luminaires with built-in trans-formers for filaments lamps
 | 
| GB/T 10228-1997
 | 干式电力变压器技术参数和要求
 | Specification and technical requirements for dry-trpe power transformers
 | 
| GB/T 10241-2007
 | 旋转变压器通用技术条件
 | ()
 | 
| GB/T 10404-2007
 | 多极和双通道旋转变压器通用技术条件
 | () | 
| GB/T 1094.10-2003
 | 电力变压器第10部分:声级测定
 | Power transformers--Part 10: Determination of sound levels
 | 
| GB/T 1094.4-2005
 | 电力变压器 第4部分:电力变压器和电抗器的雷电冲击和操作冲击试验导则
 | Power transformers-Part 4:Guide to the lightning impulse and switching impulse testing-Power transformers and reactors
 | 
| GB/T 11441-1989
 | 通信和电子设备用变压器和电感器铁心片
 | Laminations for transformers and inductors for use in telecommunication and electronic equipment
 | 
| GB/T 13027-1991
 | 油纸电容式变压器套管型式和尺寸
 | Oil impregnated paper capacitance graded transformer bushings--Types and dimensions
 | 
| GB/T 13462-1992
 | 工矿企业电力变压器经济运行导则
 | Guides for the power transformers energy saving operation in factories and mines
 | 
| GB/T 13499-2002
 | 电力变压器应用导则
 | Power transformer--Application guide
 | 
| GB/T 14006-1992
 | 通信和电子设备用变压器和电感器外形尺寸第一部分:采用 YEI-1铁心片的变压器和电感器
 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment--Part 1:Transformers and inductors using YEI-1 laminations
 | 
| GB/T 14006.2-1997
 | 通信和电子设备用变压器和电感器外形尺寸第2部分:采用YEx-2系列铁心片印制板安装式变压器和电感器
 | Outline dimemsions of transformers and inductors for use in telecommunication and electronic equipmemt--Part 2:Transformers and inductors using YEx-2 laminations for printed wiring boardmounting
 | 
| GB/T 14006.3-1997
 | 通信和电子设备用变压器和电感器外形尺寸第3部分:使用YUI-1系列铁心片的变压器和电感器
 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment--Part 3:Transformers and inductors using YUI-1 laminations
 | 
| GB/T 14542-2005
 | 运行变压器油维护管理导则
 | Guide for maintenance and supervision of transformer oil in service
 | 
| GB/T 14860-1993
 | 通信和电子设备用变压器和电感器总规范
 | Generic specification for transformers and inductors for use in telecommunication and electronic equipment
 | 
| GB/T 15164-1994
 | 油浸式电力变压器负载导则
 | Loading guide for oil-immersed power transformers
 | 
| GB/T 15183-1994
 | 按能力批准评定质量的电子设备用电源变压器分规范
 | Sectional specificationfor power transformers for use in electronic equipment for capability approval
 | 
| GB/T 15184-1994
 | 按能力批准评定质量的电子设备用开关电源变压器分规范
 | Sectional specification for power transformers for switched mode power supplies (SMPS) for use inelectronic equipment for capability approval
 | 
| GB/T 15290-1994
 | 电子设备用电源变压器和滤波扼流圈总技术条件
 | Generic specification of power supply-transformers and filter chokes for use in electronic equipment
 | 
| GB/T 16274-1996
 | 油浸式电力变压器技术参数和要求500 kV级
 | Specification and technical requirements for oil immersed power transformers 500kV
 | 
| GB/T 17211-1998
 | 干式电力变压器负载导则
 | Loading guide for dry-type power transformers
 | 
| GB/T 17468-1998
 | 电力变压器选用导则
 | The guide for choice power transformers
 | 
| GB/T 18494.1-2001
 | 变流变压器第1部分:工业用变流变压器
 | Convertor transformers--Part 1:Transformers for industrial applications
 | 
| GB/T 18494.2-2007
 | 变流变压器 第2部分:高压直流输电用换流变压器
 | ()
 | 
| GB/T 18495-2001
 | 电阻焊与焊钳一体式的变压器
 | Electric resistance welding--Integrated transformers for welding guns
 | 
| GB/T 18813-2002
 | 变压器铜带
 | Transformer copper strip
 | 
| GB/T 18909-2002
 | 按能力批准评定质量的电子设备用高频电感器和中频变压器分规范
 | Sectional specification for high-frequency inductors and intermediate frequency transformers for use in electronic equipment for capability approval
 | 
| GB/T 19262-2003
 | 微机变压器保护装置通用技术要求
 | General specification for microcomputer-based transformer protection equipment
 | 
| GB/T 20838-2007
 | 高压直流输电用油浸式换流变压器技术参数和要求
 | ()
 | 
| GB/T 2900.15-1997
 | 电工术语变压器、互感器、调压器和电抗器
 | Electrotechnical terminology--Transformer,instrument transformer,voltage regulator and reactor
 | 
| GB/T 2900.39-1994
 | 电工术语电机、变压器专用设备
 | Electrotechnical terminology--Special equipment for electrical machine and transformer
 | 
| GB/T 3859.3-1993
 | 半导体变流器变压器和电抗器
 | Semiconductor convertors--Transformers and reactors
 | 
| GB/T 4596-1984
 | 电子设备用三相变压器形铁心
 | E-cores for three-phase transformers for use in electronic equipment
 | 
| GB/T 5273-1985
 | 变压器、高压电器和套管的接线端子
 | Terminals for transformers,high-voltage apparatus and bushings
 | 
| GB/T 6451-1999
 | 三相油浸式电力变压器技术参数和要求
 | Specification and technical requirements for three-phase oil-immersed power transformers
 | 
| GB/T 7252-2001
 | 变压器油中溶解气体分析和判断导则
 | Guide to the analysis and the diagnosis of gases dissolved in transformer oil
 | 
| GB/T 7595-2000
 | 运行中变压器油质量标准
 | Quality criteria of transformer oils in service
 | 
| GB/T 7597-2007
 | 电力用油(变压器油、汽轮机油)取样方法
 | ()
 | 
| GB/T 7598-1987
 | 运行中变压器油、汽轮机油水溶性酸测定法(比色法)
 | Determination of water-soluble acid in transformer and turbine oils in service by colormetric method
 | 
| GB/T 7600-1987
 | 运行中变压器油水分含量测定法 (库仑法)
 | Determination of water content in transformer oils in service by coulometric method
 | 
| GB/T 7601-1987
 | 运行中变压器油水分测定法 (气相色谱法)
 | Determination of water content in transformer oils in service by gas chromatographic method
 | 
| GB/T 7602-1987
 | 运行中汽轮机油、变压器油T501抗氧化剂含量测定法 (分光光度法)
 | Determination of T501 oxidation inhibitor content in transformer and turbine oils in service by spectrophotometric method
 | 
| GB/T 8554-1998
 | 电子和通信设备用变压器和电感器测量方法及试验程序
 | Transformers and inductors for use in electronic and telecommunication equipment--Measuring methodsand test procedures
 | 
| GB/T 9367-1988
 | 彩色广播电视接收机用回扫变压器总技术条件
 | General specification of flyback transformers for color broadcasting TV receivers
 | 
| GB/T 9623-1988
 | 通信用电感器和变压器磁芯第一部分:总规范 (可供认证用)
 | Inductor and transformer cores for telecommunications--Part 1:Generic specification
 | 
| GB/T 9624-1988
 | 通信用电感器和变压器磁芯第二部分:分规范电感器用磁性氧化物磁芯 (可供认证用)
 | Inductor and transformer cores for telecommunications--Part 2:sectionalspecification--Magnetic oxide cores for inductor applications
 | 
| GB/T 9625-1988
 | 通信用电感器和变压器磁芯第二部分:空白详细规范电感器用磁性氧化物磁芯评定水平 A (可供认证用)
 | Inductor and transformer cores for telecommunications--Part 2:Blank detail specification--Magnetic oxide cores for inductor applications--Assessment level A
 | 
| GB/T 9626-1988
 | 通信用电感器和变压器磁芯第三部分:分规范宽带变压器用磁性氧化物磁芯 (可供认证用)
 | Inductor and transformer cores for telecommunications--Part 3:Sectional specification--Magnetic oxide cores for broad-band transformers
 | 
| GB/T 9627-1988
 | 通信用电感器和变压器磁芯第三部分:空白详细规范宽带变压器用磁性氧化物磁芯评定水平 A和B (可供认证用)
 | Inductor and transformer cores for telecommunications--Part 3:Blank detail specification--Magnetic oxide cores for broad-band transformers--Assessment levels A and B
 | 
| GB/T 9628-1988
 | 通信用电感器和变压器磁芯第四部分:分规范电源变压器和扼流圈用磁性氧化物磁芯(可供认证用)
 | Inductor and transformer cores for telecommunications--Part4:sectional specification--Magnetic oxide cores for transformers and chokes forpower applications
 | 
| GB/T 9629-1988
 | 通信用电感器和变压器磁芯第四部分:空白详细规范电源变压器和扼流圈用磁性氧化物磁芯评定水平 A(可供认证用
 | Inductor and transformer cores for telecommunications--Part 4:Blank detail specification--Magnetic oxide cores for transformers and chokes for power applications--Assessment level A
 | 
| GB/T 9632.1-2002
 | 通信用电感器和变压器磁心测量方法
 | Measuring methods of cores for inductors and transformers for telecommunications
 | 
| GB/Z 21214-2007
 | 行输出变压器用聚酯薄膜
 | ()
 | 
| HG/T 2812-2005
 | 软木橡胶密封制品 第一部分 变压器及高压电器类用
 | ()
 | 
| HG/T 2887-1997
 | 变压器用橡胶材料
 | ()
 | 
| JB 3643-2000
 | 小型弧焊变压器安全要求
 | ()
 | 
| JB/T 10088-2004
 | 6kV~500kV级电力变压器声级
 | ()
 | 
| JB/T 10112-1999
 | 变压器油泵
 | ()
 | 
| JB/T 10217-2000
 | 组合式变压器
 | ()
 | 
| JB/T 10317-2002
 | 单相油浸式配电变压器技术参数和要求
 | ()
 | 
| JB/T 10318-2002
 | 油浸式非晶合金铁心配电变压器技术参数和要求
 | ()
 | 
| JB/T 10319-2002
 | 变压器用波纹油箱
 | ()
 | 
| JB/T 10428-2004
 | 变压器用多功能保护装置
 | ()
 | 
| JB/T 10429-2004
 | 钢包精炼炉变压器
 | ()
 | 
| JB/T 10430-2004
 | 变压器用速动油压继电器
 | ()
 | 
| JB/T 10431-2004
 | 高燃点绝缘油电力变压器
 | ()
 | 
| JB/T 10544-2006
 | 地下式变压器
 | ()
 | 
| JB/T 10681-2006
 | 组合式变压器用油浸式负荷开关
 | Oil-immersed load switches for combined transformers
 | 
| JB/T 10682-2006
 | 采油机用变压器
 | Transformers for oil production machine
 | 
| JB/T 10691-2007
 | 平衡牵引变压器
 | ()
 | 
| JB/T 10692-2007
 | 变压器用油位计
 | ()
 | 
| JB/T 10693-2007
 | 城市轨道交通用干式牵引整流变压器
 | ()
 | 
| JB/T 10776-2007
 | 220kV单相牵引变压器
 | 220kV sigle-phase traction transformers
 | 
| JB/T 10778-2007
 | 三相油浸式调容变压器
 | Three-phase oil-immersed adjusting power transformers
 | 
| JB/T 10780-2007
 | 750kV油浸式电力变压器 技术参数和要求
 | Specification and technical requirements for 750kV oil-immersed power transformers
 | 
| JB/T 2426-2004
 | 发电厂和变电所自用三相变压器 技术参数和要求
 | ()
 | 
| JB/T 2931-1999
 | 牵引用硅整流变压器
 | ()
 | 
| JB/T 3018-1999
 | 盐浴炉变压器
 | ()
 | 
| JB/T 3837-1996
 | 变压器类 产品型号编制方法
 | ()
 | 
| JB/T 3857-1999
 | 电力变压器用绕线机 型式与基本参数
 | ()
 | 
| JB/T 3924-1999
 | 中频感应加热装置用变压器
 | ()
 | 
| JB/T 3955-2006
 | 矿用一般型电力变压器
 | ()
 | 
| JB/T 501-2006
 | 电力变压器试验导则
 | ()
 | 
| JB/T 5340-1991
 | 多点焊机用阻焊变压器 特殊技术条件
 | ()
 | 
| JB/T 5344.1-2004
 | 埋弧炉变压器 总则
 | ()
 | 
| JB/T 5345-2005
 | 变压器用蝶阀
 | ()
 | 
| JB/T 5347-1999
 | 变压器用片式散热器
 | ()
 | 
| JB/T 5355-2002
 | 变压器类产品机械制图补充规定
 | ()
 | 
| JB/T 5555-2001
 | 机床控制变压器
 | ()
 | 
| JB/T 5703-1991
 | 油浸式电力变压器干燥装置 能耗分等
 | ()
 | 
| JB/T 5782-1991
 | 单绕组线性旋转变压器 通用技术条件
 | ()
 | 
| JB/T 6302-2005
 | 变压器用油面温控器
 | ()
 | 
| JB/T 6303-2004
 | 电石炉变压器 技术参数和要求
 | ()
 | 
| JB/T 6312-1992
 | 矿用隔爆型煤电钻变压器综合装置
 | ()
 | 
| JB/T 6483-2005
 | 电精制防爆变压器
 | ()
 | 
| JB/T 6484-2005
 | 变压器用储油柜
 | ()
 | 
| JB/T 7065-2004
 | 变压器用压力释放阀
 | ()
 | 
| JB/T 7069-2004
 | 变压器用压力释放阀 试验导则
 | ()
 | 
| JB/T 7631-2005
 | 变压器用电子温控器
 | ()
 | 
| JB/T 7633-2007
 | 变压器用螺旋板式强油水冷却器
 | ()
 | 
| JB/T 7834-1995
 | 弧焊变压器
 | ()
 | 
| JB/T 831-2005
 | 热带电力变压器、互感器、调压器、电抗器
 | ()
 | 
| JB/T 8315-2007
 | 变压器用强迫油循环风冷却器
 | ()
 | 
| JB/T 8316-2007
 | 变压器用强迫油循环水冷却器
 | ()
 | 
| JB/T 8317-2007
 | 变压器冷却器用油流继电器
 | ()
 | 
| JB/T 8318-2007
 | 变压器用成型绝缘件 技术条件
 | ()
 | 
| JB/T 8447-2006
 | 电渣炉变压器
 | Electroslag remelting furnace transformers
 | 
| JB/T 8448.1-2004
 | 变压器类产品用密封制品技术条件 第1部分:橡胶密封制品
 | ()
 | 
| JB/T 8448.2-2004
 | 变压器类产品用密封制品技术条件 第2部分:软木橡胶密封制品
 | ()
 | 
| JB/T 8450-2005
 | 变压器用绕组温控器
 | ()
 | 
| JB/T 8506-2006
 | 黄磷炉变压器 技术参数和要求
 | Specification and technical requirements for yellow-phosphorus furnace transformers
 | 
| JB/T 8636-1997
 | 电力变流变压器
 | ()
 | 
| JB/T 8639-1997
 | 油浸式电力变压器 带有油中溶解气体分析的温升试验导则
 | ()
 | 
| JB/T 8750-1998
 | 电控设备用变压器
 | ()
 | 
| JB/T 8971-1999
 | 干式变压器用横流式冷却风机
 | ()
 | 
| JB/T 9257-1999
 | 交流差动变压器式位移传感器
 | ()
 | 
| JB/T 9258-1999
 | 直流差动变压器式位移传感器
 | ()
 | 
| JB/T 9298-1999
 | 仪器仪表用电子电源变压器通用技术条件
 | ()
 | 
| JB/T 9529-1999
 | 电阻焊机变压器 通用技术条件
 | ()
 | 
| JB/T 9545-2002
 | 变压器冷却风扇用三相异步电动技术条件
 | ()
 | 
| JB/T 9640-1999
 | 电弧炉 变压器
 | ()
 | 
| JB/T 9641-1999
 | 试验变压器
 | ()
 | 
| JB/T 9642-1999
 | 变压器用风扇
 | ()
 | 
| JB/T 9643-1999
 | 防腐蚀型油浸式电力变压器
 | ()
 | 
| JB/T 9645-1999
 | 电脱盐防爆变压器
 | ()
 | 
| JB/T 9646-1999
 | 控制或照明用小型干式变压器
 | ()
 | 
| QB 2138.1-1995
 | 家用和类似用途电器的安全通过隔离变压器接到电网电源的口腔保健器的特殊要求
 | ()
 | 
| QB/T 3521-1999
 | 500kV变压器匝间绝缘纸
 | ()
 | 
| SD 252-1988(2005)
 | 全国地方小型火力发电厂电气运行规程(发电机、变压器部分)
 | ()
 | 
| SD 326-1989(2005)
 | 进口(220-500)kV电力变压器技术规范
 | ()
 | 
| SH/T 0295-1992(2003)
 | 变压器油氧化初期挥发性水溶性酸测定法
 | ()
 | 
| 编号 | 中文名称 | 英文名称 |