| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 1486-1-1959 | 润滑脂管嘴.第1部分:机械与车辆用润滑脂管嘴和适配器 | Lubricating nipples - Lubricating nipples and adaptors for use on machinery and vehicles |
| BS 1692-1998 | 起重滑车规范 | Specification for gin blocks |
| BS 1717-1983 | 自行车和摩托车用钢管规范 | Specification for steel tubes for cycle and motor cycle purposes |
| BS 1727-1987 | 电瓶驱动的车辆用电机规范 | Specification for motors for battery operated vehicles |
| BS 1802-1951 | 一般工程与汽车用钢弹簧垫圈规范 | Specification for steel spring washers for general engineering and automobile purposes |
| BS 1877-10-1997 | 家用床上用品.第10部分:童床、摇篮童车及类似家用物品规范 | Domestic bedding - Specification for mattresses and bumpers for children's cots, perambulators and similar domestic articles |
| BS 1983-5-1989 | 机床与便携式电动工具用卡盘规范.第5部分:车床工作状态卡盘的安全操作实用规程 | Chucks for machine tools and portable power tools - Code of practice for the safe operation of workholding chucks used on lathes |
| BS 2634-1-1987 | 表面粗糙度比对试样.第1部分:车、磨、镗、铣、成形和刨削试样规范 | Roughness comparison specimens - Specification for turned, ground , bored, milled, shaped and planed specimens |
| BS 2718-1979 | 气瓶小推车规范 | Specification for gas cylinder trolleys |
| BS 2853-1957 | 架空吊车道钢梁的设计与试验规范 | Specification for the design and testing of steel overhead runway beams |
| BS 3214-1974 | 电瓶驱动车辆的保险连接器(额定电流 320安)规范 | Specification for locking connectors for battery operated vehicles (320 ampere rating) |
| BS 3237-1960 | 矿山矿物运输用轻型和中型车辆规范 | Specification for light and medium rolling stock for mineral haulage in mines |
| BS 3486-1-1996 | 农用机械.第1部分:工具用轮子的规格:车轮轮辋固定尺寸规格 | Specification for wheels for agricultural machinery, implements and trailers - Specification for wheel-to-hub fixing dimensions |
| BS 3492-1987 | 公路和铁路运输石油产品（包括航空燃油）油罐车软管及软管组件规范 | Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels |
| BS 3539-1986 | 机动车噪音测量用声级计规范 | Specification for sound level meters for the measurement of noise emitted by motor vehicles |
| BS 3710-1964 | 机车及铁路车辆制动软管连接器规范 | Specification for brake hose couplings for locomotives and rolling stock |
| BS 3726-1978 | 平衡重叉车.稳定性.基本试验 | Specification for counterbalanced lift trucks - stability - basic tests |
| BS 3810-1-1964 | 材料装卸术语.第1部分:托盘货车、托盘搬运车、手推运货车和机动运货车术语 | Glossary of terms used in materials handling - Terms used in connection with pallets, stillages, hand and powered trucks |
| BS 3818-1964 | 柴油机车及有轨内燃机车自动密封加油接头规范 | Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars |
| BS 4040-2001 | 机动车辆用加铅汽油规范 | Specification for leaded petrol (gasoline) for motor vehicles |
| BS 4068-1977 | 仪器、敷料及麻醉师用医院手推车(包括活角形手推车)规范 | Specification for hospital trolleys for instruments, dressings and for anaesthetists' use including angular trolleys |
| BS 4073-1966 | 矿山矿物运输用重型全部车辆规范 | Specification for heavy rolling stock for mineral haulage in mines |
| BS 4110-1999 | 车辆驾驶员护目镜规范 | Specification for visors for vehicle users |
| BS 4193-7-1999 | 硬质合金刀具.可转位刀片车削和仿形用单刃刀具夹.尺寸 | Hardmetal insert tooling - Single point tool holders for turning and copying for indexable inserts - Dimensions |
| BS 4322-1968 | 医院用车辆(如手推车)减震器推荐标准 | Recommendations for buffering on hospital vehicles such as trolleys |
| BS 4361-2.13-1974 | 木工机械规范.第2部分:精度试验.第13节:车床 | Specification for woodworking machines. Accuracy tests. Turning lathes |
| BS 4361-21-1989 | 木工机械 第21部分:车床规范 | Woodworking machines - Specification for turning lathes |
| BS 4430-2-1969 | 工业机动车辆安全性推荐标准.第2部分:操作和维护 | Recommendations for the safety of powered industrial trucks - Operation and maintenance |
| BS 4436-1978 | 可前后移动叉车和跨式叉车规范.稳定性试验 | Specification for reach and straddle fork lift trucks - stability tests |
| BS 4442-1-1969 | 车床轴头及面板规范.第1部分:A 式和卡姆洛克式 | Specification for lathe spindle noses and faceplates - Types 'A' and 'Camlock' |
| BS 4464-1969 | 普通工程和汽车用弹簧垫圈规范.米制系列 | Specification for spring washers for general engineering and automobile purposes - Metric series |
| BS 4521-1.1-1971 | 私营铁路道岔规范.第1部分:英国铁路机车运行道岔.第1节:工字钢轨道岔 | Specification for railway turnouts for private users - Turnouts over which British Railways locomotives operate - Turnouts using bull head rails |
| BS 4521-1.2-1971 | 私营铁路道岔规范.第1部分:英国铁路机车运行道岔.第2节:平底钢轨道岔 | Specification for railway turnouts for private users - Turnouts over which British Railways locomotives operate - Turnouts using flat bottom rail |
| BS 4521-2-1975 | 私营铁路道岔规范.第2部分:英国铁路机车不运行的、轴负荷不超过10吨的轻型平底钢轨岔道 | Specification for railway turnouts for private users - Light grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 10 tons, using flat bottom rails |
| BS 4521-3.1-1974 | 私营铁路道岔规范.第3部分:英国铁路机车不运行的、轴负荷不超过25吨的中型道岔.第1节:工字钢轨道岔 | Specification for railway turnouts for private users - Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons - Turnouts using bull head rail |
| BS 4521-3.2-1975 | 私营铁路道岔规范.第3部分:英国铁路机车不运行的、轴负荷不超过25吨的中型道岔.第2节:平底钢轨道岔 | Specification for railway turnouts for private users - Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons - Turnouts using flat bottom rails |
| BS 4521-4-1975 | 私营铁路道岔规范.第4部分:英国铁路机车不运行的、轴负荷可超过25吨的重型平底钢轨岔道 | Specification for railway turnouts for private users - Heavy grade turnouts over which British Railways locomotives do not operate, for axle loads which may exceed 25 tons, using flat bottom rails |
| BS 4639-1987 | 牵引式农用车辆制动器和制动系统规范 | Specification for brakes and braking systems for towed agricultural vehicles |
| BS 4656-1-1981 | 机床精度及试验方法.第1部分:普通车床规范 | Accuracy of machine tools and methods of test - Specification for lathes, general purpose type |
| BS 4656-2-1988 | 机床精度和试验方法.第2部分:仿形车床和仿形附件规范 | Accuracy of machine tools and methods of test - Specification for copying lathes and copying attachments |
| BS 4656-22-1988 | 机床精度及试验方法.第22部分:立式单柱和双柱镗车床规范 | Accuracy of machine tools and methods of test - Specification for vertical boring and turning lathes, single and double column types |
| BS 4656-28-1988 | 机床精度及试验方法.第28部分:车削直径小于1500mm(含)的数控车床规范 | Accuracy of machine tools and methods of test - Specification for numerically controlled turning machines up to and including 1500 mm turning diameter |
| BS 4656-29-1981 | 机床精度及试验方法.第29部分:多轴(分度回轮)自动车床规范 | Accuracy of machine tools and methods of test - Specification for automatic lathes, multi-spindle (indexing drum) type |
| BS 4656-35-1987 | 机床精度及试验方法.第35部分:加工直径小于25mm的单轴滑枕转塔自动车床规范 | Accuracy of machine tools and methods of test - Specification for capstan, turret and automatic lathes, single spindle type less than 25 mm diameter capacity |
| BS 4676-2005 | 防护服装.熔态金属铸造车间中使用的鞋靴和护腿.要求和试验方法 | Protective clothing - Footwear and gaiters for use in molten metal foundries - Requirements and test methods |
| BS 4742-3-1985 | 农用机械液压设备.第3部分:挂车用单动倾卸伸缩筒尺寸和额定压力规范 | Hydraulic equipment for agricultural machinery - Specification for dimensions and pressure rating of single-acting telescopic tipping cylinders for trailers |
| BS 4742-4-1985 | 农用机械液压设备.第4部分:挂车和机具用制动系统用液压管接头规范 | Hydraulic equipment for agricultural machinery - Specification for hydraulic couplings on braking systems for trailers and trailed equipment |
| BS 4742-5-1985 | 农用机械液压设备.第5部分:挂车和机具用制动气缸尺寸规范 | Hydraulic equipment for agricultural machinery - Specification for dimensions of braking cylinders for trailers and trailed equipment |
| BS 4742-7-1989 | 农用机械液压设备.第7部分:农用拖挂车辆液压制动系统管接头用油口连接规范 | Hydraulic equipment for agricultural machinery - Specification for port connections for agricultural trailed vehicle hydraulic brake couplings |
| BS 4840-1-1985 | 硬聚氨脂(PUR)泡沫塑料块.第1部分:运输集装箱和绝缘运输车身用聚氨脂(PUR)泡沫塑料规范 | Rigid polyurethane (PUR) foam in slab form - Specification for PUR foam for use in transport containers and insulated vehicle bodies |
| BS 4854-1972 | 矿用载人车规范 | Specification for cars for manriding in mines |
| BS 4875-5-2001 | 家具的强度和稳定性.家用和定做用桌子及小台车的强度、耐用性和稳定性要求 | Strength and stability of furniture - Requirements for strength, durability and stability of tables and trolleys for domestic and contract use |
| BS 5402-1976 | 病人手推车规范 | Specification for patient trolleys |
| BS 5409-2-1978 | 尼龙管规范.第2部分:主要用于汽车工业的11型及12型增塑或未增塑尼龙管 | Specification for nylon tubing - Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry |
| BS 5482-2-1977 | 家用丁烷-丙烷燃气装置.旅居车与非永久性住宅中的装置 | Domestic butane- and propane-gas-burning installations - Installations in caravans and non-permanent dwellings |
| BS 5502-80-1990 | 农用建筑物与筑构物.第80部分:车间、维修和检查设施的设计与施工惯例 | Buildings and structures for agriculture - Code of practice for design and construction of workshops, maintenance and inspection facilities |
| BS 5576-1998 | 野营帐篷、遮阳篷、拖车篷及大篷车车篷的防火安全性规范 | Specification for fire safety features of camping tents, awnings , trailer tents and caravan awnings |
| BS 5639-1-1978 | 叉车货叉.第1部分:钩接式叉杆术语 | Fork arms for fork lift trucks - Vocabulary for hook-on type fork arms |
| BS 5777-1979 | 托盘码垛机和高升程平台货车稳定性验证试验方法 | Methods of test for verification of stability of pallet stackers and high lift platform trucks |
| BS 5778-1979 | 工业用带前倾起重杆的码垛货车特殊条件下工作稳定性验证试验方法 | Methods of test for verification of stability of industrial trucks operating in special condition of stacking with mast tilted forward |
| BS 5832-1980 | 装有卸下压实废弃物箱的车辆规范 | Specification for compacted waste containers for lift-off vehicles |
| BS 5853-1980 | 医用小推车规范 | Specification for medicine trolleys |
| BS 5892-2-1992 | 铁路车辆材料.第2部分:锻造和轧制轮体规范 | Railway rolling stock materials - Specification for forged and rolled wheel centres |
| BS 5892-3-1992 | 铁路车辆材料.第3部分:牵引车辆及被拖客货车辆单个车轮规范 | Railway rolling stock materials - Specification for monobloc wheels for traction and trailing stock |
| BS 5892-4-1992 | 铁路车辆材料.第4部分:煅造和轧制轮箍规范 | Railway rolling stock materials - Specification for forged and rolled tyres |
| BS 5892-5-1987 | 铁路车辆材料(米制).第5部分:轮箍式车轮扣环用钢棒规范 | Railway rolling stock material (metric) - Specification for steel bars for retaining rings for tyred wheels |
| BS 5892-6-1992 | 铁路车辆材料.第6部分:牵引车辆及被拖客货车辆轮组规范 | Railway rolling stock materials - Specification for wheelsets for traction and trailing stock |
| BS 5915-1980 | 矿车种放射性矿石矿井口检定和分选规范 | Specification for equipment for minehead assay and sorting radioactive ores in containers |
| BS 5942-11-1989 | 高保真度音响设备及系统最低性能要求.第11部分:车辆(如汽车)用高保真度系统规范:一般要求 | High fidelity audio equipment and systems; minimum performance requirements - Specification for high fidelity systems for use in vehicles (for example, motor cars); general requirements |
| BS 5942-13-1989 | 高保真度音响设备及系统最低性能要求.第13部分:车辆(如汽车)用高保真系统规范.调频无线电调谐装置 | High fidelity audio equipment and systems; minimum performance requirements - Specification for high fidelity systems for use in vehicles (for example, motor cars); FM radio tuner units |
| BS 6086-1981 | 汽车内噪声的测量方法 | Method of measurement of noise inside motor vehicles |
| BS 6102-1-1992 | 自行车.第1部分:安全性要求规范 | Cycles - Specification for safety requirements for bicycles |
| BS 6102-10-1987 | 自行车.第10部分:车叉顶部装配用螺纹规范 | Cycles - Specification for screw threads used to assemble head fittings on bicycle forks |
| BS 6102-11-1991 | 自行车.第11部分:车把主管和弯管组装尺寸规范 | Cycles - Specification for assembly dimensions for stem and handlebar bend |
| BS 6102-12-1991 | 自行车.第12部分:车把主管楔角规范 | Cycles - Specification for stem wedge angle |
| BS 6102-13-1991 | 自行车.第13部分:花键毂和后链轮配合尺寸规范 | Cycles - Specification for mating dimensions for splined hub and sprocket |
| BS 6102-14-1991 | 自行车.第14部分:带方头配件的底托架轴和曲柄组件尺寸规范 | Cycles - Specification for dimensions of bottom bracket axle and crank assembly with square end fittings |
| BS 6102-15-1991 | 自行车.第15部分:辐条螺纹接头尺寸规范 | Cycles - Specification for dimensions of spoke nipples |
| BS 6102-16-1997 | 自行车.第16部分:更新制动块规范 | Cycles - Specification for replacement brake blocks |
| BS 6102-2-1982 | 自行车.第2部分:反光装置光学要求和物理要求规范 | Cycles - Specification for photometric and physical requirements of reflective devices |
| BS 6102-3-1986 | 自行车.第3部分:照明玻璃光度和物理要求规范 | Cycles - Specification for photometric and physical requirements of lighting equipment |
| BS 6102-4-1991 | 自行车.第4部分:术语 | Cycles - Glossary of terms |
| BS 6102-5-1998 | 自行车.第5部分:车轮命名及尺寸规范 | Cycles - Specification for bicycle tyre designations and dimensions |
| BS 6102-6-1997 | 自行车.第6部分:脚踏车车辋规范 | Cycles - Specification for bicycle rims |
| BS 6102-8-1990 | 自行车.自行车轮毂装配飞轮用螺纹规范 | Cycles - Specifications for screw threads used to assemble freewheels on bicycle hubs |
| BS 6102-9-1990 | 自行车.第9部分:底托组件用螺纹规范 | Cycles - Specification for screw threads used in bottom bracket assemblies |
| BS 6109-2-1989 | 车尾部升降机、移动式升降机和车载式升降斜梯.第2部分:载客升降机和斜梯惯例 | Tail lifts, mobile lifts and ramps associated with vehicles - Code of practice for passenger lifts and ramps |
| BS 6113-1981 | 运土用倾卸车车体容积额定值确定方法 | Method for volumetric rating of dumper bodies used for earth-moving |
| BS 6384-1983 | 农业和林业车辆制动性能的测定方法 | Methods for determination of braking performance of agricultural and forestry vehicles |
| BS 6571-1-1989 | 停车场控制设备.第1部分:投币式停车计时表规范 | Vehicle parking control equipment - Specification for coin operated clockwork parking meters |
| BS 6571-2-1989 | 停车场控制设备.第2部分:电动停车计时器规范 | Vehicle parking control equipment - Specification for electrically powered parking meters |
| BS 6571-4-1989 | 停车场控制设备.第4部分:隔层型停车场控制设备规范 | Vehicle parking control equipment - Specification for barrier type parking control equipment |
| BS 6571-6-1996 | 停车场控制设备.第6部分:停车开始付费控制设备规范 | Vehicle parking control equipment - Specification for pay-on-foot parking control equipment |
| BS 6571-7-1997 | 停车场控制设备.第6部分:停车牌规范 | Vehicle parking control equipment - Specification for parking discs |
| BS 6571-8-1997 | 停车控制设备.预购停车凭单规范 | Vehicle parking control equipment - Specification for pre-purchased parking vouchers |
| BS 6586-1-1993 | 采用压注法制作的聚氨酯硬泡沫塑料.第1部分:运输集装箱和车身用隔离板的聚氨酯硬泡沫塑料规范 | Rigid polyurethane (PUR) foam produced by the press injection method - Specification for PUR foam for insulated panels for transport containers and insulated vehicles bodies |
| BS 6658-1985 | 车辆司机用安全头盔规范 | Specification for protective helmets for vehicle users |
| BS 6684-1989 | 婴儿在婴儿车、折叠式小推车、高脚椅或步行时使用的保护安全带(包括可拆卸式学步安全带)规范. | Specification for safety harnesses (including detachable walking reins) for restraining children when in perambulators (baby carriages), pushchairs and high chairs and when walking |
| BS 6762-2-1991 | 休闲娱乐车辆和可移动娱乐车辆用装置的使用.第2部分:公园疗养院和可移动娱乐车辆固态燃料采暖安装实用规程 | Services for leisure accommodation vehicles and transportable accommodation units - Code of practice for the installation of solid fuel fired heating in park homes and transportable accommodation units |
| BS 6765-4-1987 | 休闲式房车.大篷车.第4部分:下部齿轮规范 | Leisure accommodation vehicles - Caravans - Specification for undergear |
| BS 6770-1988 | 旅游居住车（活动居住车）、度假篷车和活动居住装置的外部颜色指南 | Guide for exterior colours for park homes (mobile homes), holiday caravans and transportable accommodation units |
| BS 6794-1986 | 陆地车辆测量的振动数据报告方法 | Method for reporting measured vibration data for land vehicles |
| BS 6853-1999 | 客运列车的设计和建造中的防火措施实施规程 | Code of practice for fire precautions in the design and construction of passenger carrying trains |
| BS 6873-1988 | 自行车用白炽灯规范 | Specification for filament lamps for cycles |
| BS 6911-9-1993 | 运土机械试验.第9部分:翻斗车和拖拉机刮板的减速器性能验证 | Testing earth-moving machinery - Verification of retarder capability of dumpers and tractor-scrapers |
| BS 6912-16-1995 | 运土机械的安全性.翻斗车身支架和司机室翻转支架装置规范 | Safety of earth-moving machinery - Specification for dumper body support and operator's cab tilt support devices |
| BS 6912-8-1992 | 运土机械安全性.第8部分:铰接式车架锁紧装置的性能要求规范 | Safety of earth-moving machinery - Specification for performance requirements of an articulated frame locking device |
| BS 7121-12-1999 | 起重机安全操作实施规程.救援服务车和设备.实施规程 | Code of practice for safe use of cranes - Recovery vehicles and equipment - Code of practice |
| BS 7121-4-1997 | 起重机安全使用实用规程.卡车式装载机 | Code of practice for safe use of cranes - Lorry loaders |
| BS 7122-1989 | 液化气体道路运输用的焊接钢槽车规范 | Specification for welded steel tanks for the road transport of liquefiable gases |
| BS 7346-7-2006 | 烟和热控制系统部件.有顶棚停车场烟和热控制系统的功能建议和计算方法的实施规程 | Components for smoke and heat control systems - Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks |
| BS 7376-2004 | 工作台或手推车结构中使用的玻璃.规范 | Inclusion of glass in the construction of tables and trolleys - Specification |
| BS 7407-1991 | 直接用燃料能源驱动的儿童运送车辆规范 | Specification for vehicles, directly propelled by energy derived from a fuel, capable of carrying children |
| BS 7464-1991 | 近海移动式装置的起锚绞车规范 | Specification for anchor winches for mobile offshore units |
| BS 7471-1991 | 停泊绞车规范 | Specification for mooring winches |
| BS 7533-10-2004 | 用粘土、天然石或混凝土铺筑材料建造的路面.用天然石料建造的行车路面的结构设计指南 | Pavements constructed with clay, natural stone or concrete pavers - Guide for the structural design of trafficked pavements constructed of natural stone setts |
| BS 7615-1992 | 摩托车链规范 | Specification for motor cycle chains |
| BS 7669-3-1994 | 车辆阻尼系统.安全护栏的安装、检验和维修指南 | Vehicle restraint systems - Guide to the installation, inspection and repair of safety fences |
| BS 7800-2006 | 机动车燃料.高辛烷值无铅汽油(超级).规范 | Automotive fuel - High octane (super) unleaded petrol - Specification |
| BS 7901-2002 | 回收运载工具和车辆回收设备规范 | Specification for recovery vehicles and vehicle recovery equipment |
| BS 7961-2004 | 挂车耦合点的静态垂直质量(牵引杆施加于牵引车的垂直载荷)测量设备规范 | Specification for a device for measuring the static vertical mass (noseweight)at the coupling point of the towed vehicle |
| BS 7980-2003 | 车辆举升机.安装、维护、完全检验及安全操作.实施规程 | Vehicle lifts - Installation, maintenance, thorough examination and safe use - Code of practice |
| BS 811-1950 | 自行车(B.S.C.)螺纹规范(过去称为C.E.I.螺纹) | Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads) |
| BS AU 114b-1979 | 大篷车和轻型拖车用牵引托架和联轴节钢球的强度要求规范 | Specification for strength requirements of towing brackets and coupling balls for caravans and light trailers |
| BS AU 138b-2000 | 牵引车辆、挂车和半挂车气动制动系统.“接触”式连接器 | Towing vehicle, trailer and semi-trailer pneumatic braking systems - "Contact" type couplings |
| BS AU 141a-1971 | 道路车辆用柴油机性能规范 | Specification for the performance of diesel engines for road vehicles |
| BS AU 144f-1988 | 翻新汽车和商用车辆轮胎规范 | Specification for retreaded car and commercial vehicle tyres |
| BS AU 145d-1998 | 向后反光的汽车号码牌规范 | Specification for retroreflecting number plates |
| BS AU 146b-1970 | 载重量不超过7.25吨的半挂车的标准自动滚柱式联轴节规范 | Specification for standard automatic roller-type coupling for semi-trailers not exceeding 71/4 tons laden weight |
| BS AU 149a-1980 | 牵引车与挂车之间的6V或12V电气设备的电气连接件规范:12N型(普通) | Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal) |
| BS AU 152-1970 | 车辆尾端标记牌规范 | Specification for rear marking plates for vehicles |
| BS AU 156-1971 | 汽车前灯与辅助灯射向对准推荐标准 | Recommendations for aiming of headlamps and auxiliary lamps on motor vehicles |
| BS AU 159f-1997 | 用于公共高速公路机动车轮胎的检修规范 | Specification for repairs to tyres for motor vehicles used on the public highway |
| BS AU 163a-1985 | 道路车辆用气压制动设备压力试验连接规范 | Specification for pressure test connection for compressed-air pneumatic braking equipment for road vehicles |
| BS AU 164-1977 | 道路车辆碰撞试验的冲击速度测量规范 | Specification for measurement of impact velocity in collision tests on road vehicles |
| BS AU 169a-1992 | 农业用和林业用道路车辆、拖拉机和机械的内部装饰材料燃烧性能的测定方法 | Method for determination of burning behaviour of interior materials for road vehicles, and tractors and machinery for agriculture and forestry |
| BS AU 175-1b-1983 | 车辆识别号码(VIN).第1b部分:要点与结构 | Vehicle identification numbers (VIN) - Specification for content and structure |
| BS AU 175-2b-1983 | 车辆识别号码(VIN).第2b部分:世界制造商识别号码(WMI)法规规范 | Vehicle identification numbers (VIN) - Specification for world manufacturer identifier (WMI) codes |
| BS AU 175-3b-1983 | 车辆识别号码(VIN).第3b部分:定位和附件规范 | Vehicle identification numbers (VIN) - Specification for location and attachment |
| BS AU 175-4-1997 | 车辆识别号码.可视式车辆识别号码规范 | Vehicle identification numbers (VIN) - Specification for a visible vehicle identification number |
| BS AU 175-4a-1997 | 车辆识别号码(VIN).可视车辆识别号码规范 | Vehicle identification numbers (VIN) - Specification for a visible vehicle identification number |
| BS AU 177a-1980 | 带6V或12V电压的电气设备的牵引车和挂车之间电气连接器规范:12S型(补充) | Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary) |
| BS AU 178a-1992 | 道路车辆用安全防碎玻璃规范 | Specification for road vehicle safety glass |
| BS AU 181-1982 | 可拆卸车体系统界面尺寸规范 | Specification for interface dimensions for demountable vehicle body systems |
| BS AU 184-1982 | 世界各地道路车辆制造商的标识符号(WMPI)规范 | Specification for world parts manufacturer identifier code (WPMI) for road vehicles |
| BS AU 187-2000 | 牵引乘用车和轻型运货车用牵引绳索组件 | Tow rope assemblies for towing passenger cars and light vans |
| BS AU 188-1983 | 道路车辆用牵引绳、缆、杆的固定规范 | Specification for anchorages for towing ropes, cables or bars for road vehicles |
| BS AU 190-1983 | 拖载达2000kg的挂车三角形拉杆上超限装置安装面尺寸和固定螺栓规范 | Specification for interface dimensions and fixing bolts for the mounting of overrun devices on delta shaped drawbars of trailers up to 2000 kg |
| BS AU 192-1983 | 大篷车质量与尺寸术语词汇 | Glossary of terms for masses and dimensions of caravans |
| BS AU 193a-1990 | 摩托车和轻型摩托车排气系统更换规范 | Specification for replacement motor cycle and moped exhaust systems |
| BS AU 194-1984 | 牵引车和挂车之间电气连接件性能规范 | Specification for performance of electrical connections between towing vehicles and trailers |
| BS AU 196-1984 | 24V挂车防锁制动系统和牵引车之间电气连接件规范 | Specification for electrical connections between 24 V trailer antilock braking systems and towing vehicles |
| BS AU 197-1984 | 牵引车和带有24V电气设备挂车之间的电气连接件规范:24N型(普通) | Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 N (normal) |
| BS AU 198-1984 | 牵引车和带有24V电气设备挂车之间的电气连接件规范:24S型(补充) | Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 S (supplementary) |
| BS AU 199a-1997 | 乘用车手控装置、指示器和信号灯位置规范 | Specification for location of hand controls, indicators and tell-tales in passenger cars |
| BS AU 1c-1989 | 半挂车第五轮大号销钉"50"尺寸规范 | Specification for dimensions of '50' fifth wheel king pin for semi-trailers |
| BS AU 200-1a-1984 | 载重货车用减少喷溅装置.第1a部分:密封装置的设计规范 | Spray reducing devices for heavy goods vehicles - Specification for design of containment devices |
| BS AU 200-2a-1984 | 载重货车用减少喷溅装置.第2a部分:灭火材料及设备和空气/水分离材料及及设备性能规范 | Spray reducing devices for heavy goods vehicles - Specification for performance of suppression material and devices, and air/water separating material and devices |
| BS AU 201-2-1985 | 继电器和闪光灯.第2部分:道路车辆继电器终端配置与功能属性规范 | Relays and flashers - Specification for arrangement and functional attribution of relay terminals for road vehicles |
| BS AU 203a-1988 | 商用道路车辆的动力输出装置和辅助驱动装置之间联接器尺寸规范 | Specification for dimensions of couplings between power take offs (PTOs) and ancillary driven units on commercial road vehicles |
| BS AU 205-1986 | 道路车辆静态转弯角度性能制动效应试验方法 | Method of test for effect of braking on steady state cornering behaviour of road vehicles |
| BS AU 206-1-1986 | 道路车辆诊断系统.第1部分:术语词汇 | Diagnostic systems for road vehicles - Glossary |
| BS AU 206-2-1986 | 道路车辆诊断系统.第2部分:诊断测试器图形符号规范 | Diagnostic systems for road vehicles - Specification for graphical symbols for diagnostic testers |
| BS AU 206-3-1986 | 道路车辆诊断系统.第3部分:试验点火系统的一般要求规范 | Diagnostic systems for road vehicles - Specification for general requirements for testing ignition systems |
| BS AU 206-4-1986 | 道路车辆诊断系统.第4部分:试验电子系统的一般要求规范 | Diagnostic systems for road vehicles - Specification for general requirements for testing electronic systems |
| BS AU 207-1986 | 汽车收音机安装空间尺寸规范 | Specification for dimensions of car radio installation space |
| BS AU 209-0-1996 | 车辆安全性.车辆安全设备/系统应用指南 | Vehicle security - Guide to the application of security devices/systems to vehicles |
| BS AU 209-1a-1992 | 车辆安全性.乘用车和改型车锁紧系统规范 | Vehicle security - Specification for locking systems for passenger cars and car derived vehicles |
| BS AU 209-2-1988 | 车辆安全性.车内娱乐和通讯设备防盗安全系统规范 | Vehicle security - Specification for security systems against theft of in-car equipment for entertainment and communication purposes |
| BS AU 209-3-1988 | 车辆安全性.第3部分:乘用车和改型车玻璃安装用安全标记规范 | Vehicle security - Specification for security marking of glazing for passenger cars and car derived vehicles |
| BS AU 209-4a-1995 | 车辆安全性.乘用车和改型车辆用玻璃安装安全性规范 | Vehicle security - Specification for security glazing for passenger cars and car derived vehicles |
| BS AU 209-5b-1996 | 车辆安全性.乘用车和改型汽车中心动力锁死系统规范 | Vehicle security - Specification for central power locking systems for passenger cars and car derived vehicles |
| BS AU 209-6a-1996 | 车辆安全性.乘用车和改型汽车锁死系统规范 | Vehicle security - Specification for dead locking systems for passenger cars and car derived vehicles |
| BS AU 209-7-1993 | 车辆安全性.第7部分:货车驾驶室的锁定系统规范 | Vehicle security - Specification for locking systems for goods vehicle driver's compartments |
| BS AU 209-8-1997 | 车辆安全性.货车货舱锁紧系统规范 | Vehicle security - Specification for locking systems for goods vehicle load compartments |
| BS AU 210-1-1987 | 大篷车和轻型挂车用挂钩.第1部分:钢挂钩机械强度的计算方法 | Drawbars for caravans and light trailers - Method of calculation for the mechanical strength of steel drawbars |
| BS AU 210-2-1994 | 大篷车和轻型挂车用拉杆.第2部分:铝拉杆和底盘设计规范 | Drawbars for caravans and light trailers - Specification for the design of aluminium drawbars and chassis |
| BS AU 211-1987 | 商用车辆和公共汽车齿轮传动空气压缩机四孔法兰尺寸规范 | Specification for dimensions of four-hole flanges for gear-driven air compressors for commercial vehicles and buses |
| BS AU 214-2-1988 | 变速箱法兰.第2部分:商用车辆和公共汽车A型齿轮箱法兰尺寸规范 | Gearbox flanges - Specification for dimensions for type A gearbox flanges for commercial vehicles and buses |
| BS AU 214-3-1988 | 变速箱法兰.第3部分:商用车辆和公共汽车S型齿轮箱法兰尺寸规范 | Gearbox flanges - Specification for dimensions for type S gearbox flanges for commercial vehicles and buses |
| BS AU 214a-1-1987 | 变速箱法兰.第1部分:T形、商用车辆和公共汽车用T型正交齿齿轮变速箱法兰的尺寸规范 | Gearbox flanges - Specification for dimensions of cross-tooth gearbox flanges, type T, for commercial vehicles and buses |
| BS AU 215-1-1987 | 动力输出装置.第1部分:商用道路车辆外廓尺寸规范 | Power take offs (PTOs) - Specification for dimensions for clearance envelope for commercial road vehicles |
| BS AU 215-2-1987 | 动力输出装置.第2部分:商用道路车辆侧面开口尺寸规范 | Power take offs (PTOs) - Specification for dimensions of side openings for commercial road vehicles |
| BS AU 215-3-1988 | 动力输出装置.第3部分:商用道路车辆安装在尾部的功率输出装置的连接件尺寸规范 | Power take offs (PTOs) - Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles |
| BS AU 216-1-1987 | 道路车辆用石油基制动液的液压制动系统.第1部分:石油基基准液规范 | Hydraulic brake systems using petroleum base brake fluids for road vehicles - Specification for petroleum base reference fluid |
| BS AU 217-1a-1987 | 机动车辆用最大道路行驶速度限制器.第1a部分:安装要求规范 | Maximum road speed limiters for motor vehicles - Specification for installed requirements |
| BS AU 217-2-1989 | 机动车辆用最大公路行驶限速器.第2部分:系统和部件要求规范 | Maximum road speed limiters for motor vehicles - Specification for system and component requirements |
| BS AU 223a-2006 | 制作汽车和轻型面包车承重架的设计和结构性能.规范 | Design, construction performance and marking of vehicle support stands for cars and light vans - Specification |
| BS AU 224b-1997 | 汽车和轻型面包车用便携式车轮坡道规范 | Specification for portable wheel ramps for cars and light vans |
| BS AU 225-1988 | 商用道路车辆转向球形接合件尺寸规范 | Specification for dimensions of steering ball joints for commercial road vehicles |
| BS AU 227-1988 | 商用车辆和公共汽车交流发电机圆轴端头和轮毂尺寸规范 | Specification for dimensions of cylindrical shaft ends and hubs for alternators for commercial vehicles and buses |
| BS AU 228-1b-2002 | 道路车辆冲击试验.第1部分:测量技术和一般仪器规范 | Impact tests on road vehicles - Specification for measurement techniques and general instrumentation |
| BS AU 228-2-1989 | 道路车辆碰撞试验.第2部分:使用光学仪器的测量技术规范 | Impact tests on road vehicles - Specification for measurement techniques using optical instrumentation |
| BS AU 232-1989 | 装有调节器的道路车辆交流发电机的试验和一般要求方法 | Methods of test and general requirements for road vehicle alternators with regulators |
| BS AU 233-1989 | 乘用车起动电动机电气连接件规范 | Specification for starter motor electrical connections for passenger cars |
| BS AU 234-1989 | 道路车辆起动电动机一般要求试验方法 | Methods of test and general requirements for road vehicle starter motors |
| BS AU 235-1-1989 | 商用车辆第五轮耦合装置.第1部分:试验条件和强度要求规范 | Fifth wheel couplings for commercial vehicles - Specification for test conditions and strength requirements |
| BS AU 236-1990 | 道路车辆圆形电子转速表 | Specification for circular electronic tachographs for road vehicles |
| BS AU 237a-1993 | 汽车启动用轻型家用跨接线引线装置规范 | Specification for light domestic duty jumper lead sets for automotive starting |
| BS AU 238-1991 | 道路车辆照明及灯光信号装置术语词汇 | Glossary of terms for road vehicle lighting and light signalling devices |
| BS AU 242a-1998 | 汽车挡风玻璃检修.实用规程 | Automotive windscreen repair - Code of practice |
| BS AU 244-1992 | 车辆动力学和道路定位能力的术语词汇 | Glossary of terms for road vehicle dynamics and road holding ability |
| BS AU 245-1992 | 3.5吨以上的商用车辆和公共汽车前牵引附件规范 | Specification for front towing attachments for commercial road vehicles and buses over 3.5 t |
| BS AU 246-1992 | 双轴道路车辆重心测定方法 | Method for determination of the centre of gravity of road vehicles with two axles |
| BS AU 24a-1989 | 总重量达5000kg挂车的牵引连接规范 | Specification for towing connections for trailers up to 5000 kg gross mass |
| BS AU 25-1964 | 总重5-14吨的挂车和牵引车的牵引钩规范 | Specification for towing hook for use between trailers of 5-14 tons gross weight and towing vehicle |
| BS AU 250-1993 | 商业车辆和公共汽车1、2和3 型交流发电机安装尺寸规范 | Specification for mounting dimensions of alternators, types 1, 2 and 3 for commercial vehicles and buses |
| BS AU 251-1994 | 汽车叠层挡风玻璃检修器具的操作规范 | Specification for performance of automotive laminated windscreen repair systems |
| BS AU 252-1993 | 道路车辆用经节起动器电动机小齿轮规范 | Specification for diametral pitch starter motor pinions for road vehicles |
| BS AU 255-1-1994 | 道路车辆非屏蔽低压电缆.厚壁绝缘电缆的导线大小和尺寸规范 | Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thick walled insulated cables |
| BS AU 255-2-1994 | 道路车辆非屏蔽低压电缆.薄壁绝缘电榄的导线大小及尺寸规范 | Road vehicle unscreened low tension cables - Specification for conductor sizes and dimensions for thin walled insulated cables |
| BS AU 259-1995 | 商用车辆和公共汽车用部件规范.T型啮合传动轴法兰 | Specification for components for commercial vehicles and buses - Cross-tooth propeller shaft flanges, type T |
| BS AU 26-1964 | 总重5-16吨的挂车和牵引车的牵引爪规范 | Specification for towing jaw for use between trailers of 5-16 tons gross weight and towing vehicle |
| BS AU 262-1-1995 | 道路车辆.带有圆锥形底座的护套型热线点火塞及其汽缸盖外壳.M14x1.25热线点火塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M14 x 1, 25 glow-plugs |
| BS AU 262-2-1995 | 道路车辆.带有圆锥形底座的护套型热线点火塞及其汽缸盖外壳.M12x1.25热线点火塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M12 x 1.25 glow-plugs |
| BS AU 263-1995 | 道路车辆.带有圆锥形底座的M14x1.25压实火花塞及其汽缸盖外壳 | Road vehicles - M14 X 1,25 compact spark-plugs with conical seating and their cylinder head housing |
| BS AU 264-1995 | 道路车辆.带有圆锥形底座的M18x1.5火花塞及其汽缸盖外壳 | Road vehicles - M18 X 1,5 spark-plugs with conical seating and their cylinder head housing |
| BS AU 265-2-1995 | 道路车辆.点火系统.电子性能和功能的测试方法 | Road vehicles - Ignition systems - Electrical performance and function test methods |
| BS AU 268-2003 | 小客车和轻型厢式货车.商用牵引杆组件.规范 | Passenger cars and light vans - Commercial towing pole assemblies - Specification |
| BS AU 27-1964 | 总重5-35吨挂车和牵引车的牵引钩规范 | Specification for towing hook for use between trailers of 5-35 tons gross weight and towing vehicle |
| BS AU 28-1964 | 总重5-35吨的挂车和牵引车的牵引爪规范 | Specification for towing jaw for use between trailers of 5-35 tons gross weight and towing vehicle |
| BS AU 29-1964 | 总重5-35吨的挂车和牵引车连接用牵引杆眼及前导轮架销规范 | Specification for drawbar eyes and forecarriage pins for connection between trailers of 5-35 tons gross weight and towing vehicle |
| BS AU 2a-1970 | 超重型半挂车用直径为3.5 - 4.5的第五轮大号销钉尺寸规范 | Specification for dimensions of 31/2 - 41/2 in diameter fifth wheel king pin for use with extra heavy duty semi-trailers |
| BS AU 3-1970 | 拖拉机和半挂车的间隙尺寸和牵引座的位置规范 | Specification for clearance dimensions and fifth wheel positions for tractors and semi-trailers |
| BS AU 30b-1970 | 装载重量为7至14.25吨的半挂车用的标准自动滚柱式连接器规范 | Specification for standard automatic roller-type coupling for semi-trailers of 7 tons to 143/4 tons laden weight |
| BS AU 40-4a-1966 | 机动车辆照明及信号设备规范.第4a部分:密封式光束前照灯 | Specification for motor vehicle lighting and signalling equipment - Sealed beam headlamps |
| BS AU 50-1.0d-1998 | 轮胎和车轮.轮胎.综述 | Tyres and wheels - Tyres - General |
| BS AU 50-1.1.2-2001 | 轮胎和轮子.轮胎.汽车轮胎.滚动圆周测量法.加载的新轮胎 | Tyres and wheels - Tyres - Car tyres - Methods for measuring rolling circumference - Loaded new tyres |
| BS AU 50-1.1.3-1993 | 轮胎和车轮.轮胎.汽车轮胎.滚动阻力测量法 | Tyres and wheels - Tyres - Car tyres - Method of measuring rolling resistance |
| BS AU 50-1.1.4b-1996 | 轮胎和轮子.轮胎.汽车轮胎.轮胎性能检验的试验方法 | Tyres and wheels - Tyres - Car tyres - Method of test for verifying tyre capabilities |
| BS AU 50-1.2.1b-2001 | 轮胎和轮子.轮胎.商用汽车轮胎.轮胎 | Tyres and wheels - Tyres - Commercial vehicle tyres - Tyres |
| BS AU 50-1.2.2-1991 | 轮胎和车轮.商用车辆轮胎.轮胎滚动周长的测量方法.负载型新轮胎 | Tyres and wheels - Tyres - Commercial vehicle tyres - Method of measuring tyre rolling circumference - Loaded new tyres |
| BS AU 50-1.2.3-1993 | 轮胎和车轮.第1部分:轮胎.第2节:商业车轮胎.第3小节:滚动阻力测量法 | Tyres and wheels - Tyres - Commercial vehicle tyres - Method of measuring rolling resistance |
| BS AU 50-1.2.4-1994 | 轮胎和车轮.第1部分:轮胎.第2节:商用车辆轮胎.第4小节:验证轮胎性能的试验方法 | Tyres and wheels - Tyres - Commercial vehicle tyres - Method of test for verifying tyre capabilities |
| BS AU 50-1.3.3-1996 | 轮胎和车轮规范.轮胎.越野轮胎.移动式吊车和类似专用机械轮胎规范 | Specification for tyres and wheels - Tyres - Off-the-road tyres - Specification for tyres for mobile cranes and similar specialized machines |
| BS AU 50-1.4.3a-1992 | 轮胎和车轮.第1部分:轮胎.第4节:农用拖拉机和机械轮胎.第3a小节:层片额定标记系列轮胎的分类代码和术语规范 | Tyres and wheels - Tyres - Agricultural tractor and machine tyres - Specification for classification codes and nomenclature for ply rating marked series tyres |
| BS AU 50-1.4.8-1998 | 轮胎和车轮.农用拖拉机和机械的轮胎.农用拖拉机驱动轮滚动周边的测量方法 | Tyres and wheels - Tyres - Agricultural tractor and machine tyres - Method of measuring tyre rolling circumference for agricultural tractor drive wheels |
| BS AU 50-1.5.1-1994 | 轮胎和车轮.第1部分:轮胎.第5节:工业用车辆轮胎.第1小节:代码指定系列轮胎规范 | Tyres and wheels - Tyres - Industrial vehicle tyres - Specification for code-designated series tyres |
| BS AU 50-1.5.3-1994 | 轮胎和车轮.轮胎.工业用车辆轮胎.5级锥度或平底轮辋充气轮胎(公制系列)规范:负载额定值 | Tyres and wheels - Tyres - Industrial vehicle tyres - Specification for pneumatic tyres (metric series) on 5 ° tapered or flat base rims: load ratings |
| BS AU 50-1.5.4a-1994 | 轮胎和轮子.轮胎.工业车辆轮胎.充气轮胎轮辋用实心轮胎(米制系列)规范:命名、尺寸和标记 | Tyres and wheels - Tyres - Industrial vehicle tyres - Specification for solid tyres (metric series) for pneumatic tyre rims: designation , dimensions and marking |
| BS AU 50-1.5.5-1998 | 轮胎和轮子.轮胎.工业车辆轮胎.充气轮胎轮辋用实心轮胎(公制系列)规范.额定负载 | Tyres and wheels - Tyres - Industrial vehicle tyres - Specification for solid tyres (metric series) for pneumatic tyre rims - Load ratings |
| BS AU 50-1.5.6-1994 | 轮胎和车轮.第1部分:轮胎.第5节:工业用车辆轮胎.第6小节:圆柱形和圆锥形底基橡胶实心轮胎(公制系列)、牌号 | Tyres and wheels - Tyres - Industrial vehicle tyres - Specification for cylindrical and conical base rubber solid tyres (metric series), designation, dimensions and marking |
| BS AU 50-1.6.3a-1995 | 轮胎和车轮.轮胎.摩托车轮胎.代码指定系列(直径代码为4～12)轮胎的标记、尺寸和载荷额定值规范 | Tyres and wheels - Tyres - Motorcycle tyres - Specifications for designations, dimensions and load ratings for code designated series (diameter codes 4 to 12) tyres |
| BS AU 50-1.6.6a-1998 | 轮胎和轮子.轮胎.摩托车轮胎.检验轮胎性能的试验方法 | Tyres and wheels. Tyres. Motorcycle tyres. Method of test for verifying tyre capabilities |
| BS AU 50-1.6.7-1998 | 轮胎和轮子.轮胎.摩托车轮胎.滚动阻力测量试验方法 | Tyres and wheels - Tyres - Motorcycle tyres - Method of test for measuring rolling resistance |
| BS AU 50-1.6.8-2000 | 轮胎和轮子.轮胎.摩托车轮胎.在负载条件下新轮胎的轮胎滚动圆周的测量方法 | Tyres and wheels - Tyres - Motorcycle tyres - Method of measuring tyre rolling circumference for new tyres under loaded conditions - Section 6: Motorcycle tyres Subsection 6.8: Method for measuring tyre rolling circumference for new tyres under loaded conditions |
| BS AU 50-1.7.1-1989 | 轮胎和车轮.第1部分:轮胎.第7节:机动自行车轮胎.第1小节:轮胎牌号、尺寸和载重额定规范 | Tyres and wheels - Tyres - Moped tyres - Specification for tyre designations, dimensions and load ratings |
| BS AU 50-1.8-1989 | 轮胎和车轮.第1部分:轮胎.第8节:轮胎、内胎和垫带保存实用规程 | Tyres and wheels - Tyres - Code of practice for the storage of tyres, inner tubes and flaps |
| BS AU 50-2.2a-1984 | 轮胎和车轮.第2部分:车轮及轮辋.第2a节:商用车辆轮毂和轮毂中心尺寸规范 | Tyres and wheels - Wheels and rims - Specification for dimensions of wheel naves and hub centres for commercial vehicles |
| BS AU 50-2.3-1994 | 轮胎和车轮.第2部分:车轮和轮辋.第3节:商用车辆的道路车轮螺母、双头螺栓和螺栓规范 | Tyres and wheels - Wheels and rims - Specification for road-wheel nuts, studs and bolts for commercial vehicles |
| BS AU 50-2.5c-1996 | 轮胎和车轮.车轮和轮辋.乘用车全部用或部分用轻铸合金制造的道路车轮规范 | Tyres and wheels - Wheels and rims - Specification for road wheels manufactured wholly or partly of cast light alloy for passenger cars |
| BS AU 50-2.6a-1983 | 轮胎和车轮.第2部分:车轮和轮辋.第6节:机动自行车和摩托车全部用或部分用轻质合金制造的道路车轮规范 | Tyres and wheels - Wheels and rims - Specification for road wheels manufactured wholly or partly of light alloy for mopeds and motor cycles |
| BS AU 50-2.7a-1995 | 轮胎和车轮.第2部分:车轮和轮辋.第7节:商用车辆轮胎和车轮的选择和维护实用规程 | Tyres and wheels - Wheels and rims - Code of practice for the selection and care of tyres and wheels for commercial vehicles |
| BS AU 50-2.8a-1985 | 轮胎和车轮.第2部分:车轮及轮辋.第8节:乘用车车轮的选择与保养实用规程(包括大篷车和轻型挂车) | Tyres and wheels - Wheels and rims - Code of practice for the selection and care of wheels for passenger cars (including caravans and light trailers) |
| BS AU 50-3.1e-2002 | 轮胎和车轮.阀门.尺寸、名称与符号、使用中阀门压力等级和夹紧阀门扭矩 | Tyres and wheels - Valves - Dimensions, designation, valve pressure ratings by use and torque for clamp-in valves |
| BS AU 50-3.7-1985 | 轮胎和车轮.气门.乘用车(含大篷车和轻型拖车)轮胎充气气门的选择和保养实用规程 | Tyres and wheels - Valves - Code of practice for the selection and care of tyre inflation valves for passenger cars (including caravans and light trailers) - Section 7: Code of practice for the selection and care of tyre inflation valves for passenger cars (including cartavens and light vehicles |
| BS AU 50-3.8-1985 | 轮胎和车轮.气门.商用车辆轮胎充气气门的选择和保养实用规程 | Tyres and wheels - Valves - Code of practice for the selection and care of tyre inflation valves for commercial vehicles - Section 8a: Code of practice for the selection and care of tyre inflation valves for commercial vehicles |
| BS AU 50-4.2.1a-2002 | 轮胎和轮子.轮辋的外形和尺寸.商用车辆轮辋.米制系列轮辋规范 | Tyres and wheels - Rim profiles and dimensions - Commercial vehicle rims - Specification for metric series rims - Section 2: Commercial vehicle rims Subsection 2.1a: Specification for metric series rims |
| BS AU 50-4.5.1-1995 | 轮胎和车轮.第4部分:轮辋外廓和尺寸.第5节:工业用车轮辋.第1小节:代码制定系列轮胎用轮辋外廓和尺寸规范 | Tyres and wheels - Rim profiles and dimensions - Industrial vehicle rims - Specification for rim profiles and dimensions for code-designated series tyres |
| BS AU 50-4.5.2-1996 | 轮胎和车轮.轮辋外廓和尺寸.工业用车辆轮辋.充气轮胎用轮辋的公制系列充气轮胎和实心轮胎的轮辋外廓和尺寸 | Tyres and wheels - Rim profiles and dimensions - Industrial vehicle rims - Specification for rim profiles and dimensions for metric series pneumatic tyres and solid tyres for pneumatic tyre rims |
| BS AU 50-4.6.3-1992 | 轮胎和车轮.轮辋外廓和尺寸.摩托车轮辋.代码指定系列轮辋(直径代码4-12)规范 | Tyres and wheels - Rim profiles and dimensions - Motorcycle rims - Specification for code designated series (diameter codes 4 to 12) rims |
| BS AU 50-4.7.1-1991 | 轮胎和车轮.轮辋外廓和尺寸.机动自行车轮辋.机动自行车轮辋规范 | Tyres and wheels - Rim profiles and dimensions - Moped rims - Specification for moped rims |
| BS AU 7a-1983 | 道路车辆电缆的颜色标志规范 | Specification for colour code for road vehicle electrical cables |
| BS AU 88a-1985 | 汽车用轻型电缆额定容量推荐标准 | Recommendations for ratings for light duty cables for automobile use |
| BS AU 91-1965 | 起动蓄电池圆锥形接线端子的电缆接头尺寸(用正极接地部件的汽车和轻便商用汽车)规范 | Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system) |
| BS C 15-1960 | 航空用牵引车杆连接件的连接尺寸规范 | Specification for coupling dimensions for aircraft-to-tractor tow bar connections |
| BS CWA 15145-2004 | 机动车燃料.内燃机用柴油乳剂中的水.要求和试验方法 | Automotive fuels - Water in diesel fuel emulsions for use in internal combustion engines - Requirements and test methods |
| BS CWA 15293-2005 | 机动车燃料.乙醇E85.要求和试验方法 | Automotive fuels - Ethanol E85 - Requirements and test methods |
| BS CWA 15539-2006 | 列车的编号和代码系统 | Numbering of and coding system for trains |
| BS DD 203-1-1991 | 工业自动化:车间生产.确定要求的标准化和方法学参照模型 | Industrial automation: shop floor production - Reference model for standardization and a methodology for identification of requirements |
| BS DD 203-2-1991 | 工业自动化:车间生产.标准化和方法学参照模型的应用 | Industrial automation: shop floor production - Application of the reference model for standardization and methodology |
| BS DD CEN ISO/TS 17261-2005 | 智能运输系统.自动车辆和设备识别.联运货物运输体系和术语 | Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal goods transport architecture and terminology |
| BS DD CEN ISO/TS 17262-2003 | 自动车辆和设备识别.联运货物运输.编号和数据结构 | Automatic vehicle and equipment identification - Intermodal goods transport - Numbering and data structures |
| BS DD CEN ISO/TS 17263-2003 | 自动车辆和设备识别.联运货物运输.系统参数 | Automatic vehicle and equipment identification - Intermodal goods transport - System parameters |
| BS DD CEN ISO/TS 17573-2003 | 道路运输和运输量远程信息管理.电子费用收集(EFC).与运输业务有关的车辆的系统结构 | Road transport and traffic telematics - Electronic fee collection (EFC) - System architecture for vehicle related transport services |
| BS DD CEN/TS 13149-3-2007 | 公共运输.道路车辆调度和控制系统.WorldFIP文电内容 | Public transport - Road vehicle scheduling and control systems - WorldFIP message content |
| BS DD CEN/TS 13149-6-2006 | 公共运输.道路车辆调度和控制系统.CAN文电内容 | Public transport - Road vehicle scheduling and control systems - CAN message content |
| BS DD CEN/TS 14778-2-2006 | 固体生物燃料.抽样.卡车运输的颗粒物质的取样方法 | Solid biofuels - Sampling - Methods for sampling particulate material transported in lorries |
| BS DD CEN/TS 14906-2004 | 皮革.装饰用皮革特性.车辆用皮革的选择指南 | Leather - Upholstery leather characteristics - Guide for the selection of leather for automotive |
| BS DD CEN/TS 15213-1-2006 | 道路运输和交通远程信息处理.防止自行车偷窃的窃后系统参考结构和术语 | Road transport and traffic telematics - After-theft systems for the recovery of stolen vehicles - Reference architecture and terminology |
| BS DD CEN/TS 15213-2-2006 | 道路运输和交通远程信息处理.防止自行车偷窃的窃后系统参考结构和术语.通用情况信息单元 | Road transport and traffic telematics - After-theft systems for the recovery of stolen vehicles - Common status message elements |
| BS DD CEN/TS 15213-3-2006 | 道路运输和交通远程信息处理.被盗车辆回收或归还用盗后纪录系统.近程通讯用接口和系统要求 | Road transport and traffic telematics - After-theft systems for the recovery of stolen vehicles - Interface and system requirements for short range communication |
| BS DD CEN/TS 15213-4-2006 | 道路运输和交通远程信息处理.被盗车辆回收或归还用盗后纪录系统.远程通讯用接口和系统要求 | Road transport and traffic telematics - After-theft systems for the recovery of stolen vehicles - Interface and system requirements for long range communication |
| BS DD CEN/TS 15213-5-2006 | 道路运输和交通远程信息处理.被盗车辆回收或归还用盗后纪录系统.信息接口 | Road transport and traffic telematics - After-theft systems for the recovery of stolen vehicles - Messaging interface |
| BS DD CEN/TS 15504-2007 | 公共运输.道路车辆.车辆中明显的可变的乘客信息装置 | Public transport - Road vehicles - Visible variable passenger information devices inside the vehicle |
| BS DD CLC/TS 50502-2007 | 铁路设施.铁路车辆.无轨电车上的电气设备.安全要求和连接系统 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and connection systems |
| BS DD ENV 12315-1-1997 | 交通和旅行信息(TTI).通过专用短程通信的TTI信息.数据规范.下行线路(路边对车辆) | Traffic and traveller information (TTI) - TTI messages via dedicated short-range communication - Data specification - Downlink (roadside to vehicle) |
| BS DD ENV 12315-2-1997 | 交通和旅行信息(TTI).通过专用短程通信的TTI信息.数据规范.上行线路(车辆对路边) | Traffic and traveller information (TTI) - TTI messages via dedicated short-range communication - Data specification - Uplink (vehicle to roadside) |
| BS DD ENV 12694-1997 | 公共运输.道路车辆.可调的电子外部信号的尺寸要求 | Public transport - Road vehicles - Dimensional requirements for variable electronic external signs |
| BS DD ENV 13093-1998 | 公交运输.道路车辆.司机操纵台机械接口的要求.小型显示器和小键盘区参数 | Public transport - Road vehicles - Driver's console mechanical interface requirements - Minimum display and keypad parameters |
| BS DD ENV 13149-2-2000 | 公共运输.道路车辆调度表和控制系统.WORLDFIP电缆线路规范 | Public transport - Road vehicle scheduling and control systems - WORLDFIP cabling specifications |
| BS DD ENV 13563-2000 | 交通控制设备.车辆检测器 | Traffic control equipment - Vehicle detectors |
| BS DD IEC/PAS 62437-2006 | 道上车辆、船舶和设备上用接收机保护的无线电干扰特性.限值和测量方法.有源天线规范 | Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement - Specifications for active antennas |
| BS DD ISO/PAS 11154-2007 | 道路车辆.车顶载物架 | Road vehicles - Roof load carriers |
| BS DD ISO/PAS 22574-2007 | 道路车辆.制动衬面摩擦材料.目视检验 | Road vehicles - Brake linings friction materials - Visual inspection |
| BS DD ISO/PAS 27145-1-2006 | 道路车辆.全球统一的道路车辆车载诊断系统技术法规(WWH－OBD)通讯要求的执行.通用信息和用例定义 | Road vehicles - Implementation of WWH-OBD communication requirements - General information and use case definition |
| BS DD ISO/PAS 27145-2-2006 | 道路车辆.全球统一的道路车辆车载诊断系统技术法规(WWH－OBD)通讯要求的执行.与普通排放相关的数据词典 | Road vehicles - Implementation of WWH-OBD communication requirements - Common emissions-related data dictionary |
| BS DD ISO/PAS 27145-3-2006 | 道路车辆.全球统一的道路车辆车载诊断系统技术法规(WWH－OBD)通讯要求的执行.通用信息词典 | Road vehicles - Implementation of WWH-OBD communication requirements - Common message dictionary |
| BS DD ISO/PAS 27145-4-2006 | 道路车辆.全球统一的道路车辆车载诊断系统技术法规(WWH－OBD)通讯要求的执行.车辆和试验设备间连接 | Road vehicles - Implementation of WWH-OBD communication requirements - Connection between vehicle and test equipment |
| BS DD ISO/TS 11155-2-2002 | 道路车辆.乘客舱内空气过滤器.气体过滤试验 | Road vehicles - Air filters for passenger compartments - Test for gaseous filtration |
| BS DD ISO/TS 15827-2007 | 道路车辆.试验程序.小型女性假人手臂和大臂与司机前气囊和侧气囊相互作用的评估 | Road vehicles - Test procedures - Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags |
| BS DD ISO/TS 16553-2006 | 道路车辆.数据电缆.试验方法和要求 | Road vehicles - Data cables - Test methods and requirements |
| BS EN 10240-1998 | 钢管内外保护覆层.用于自动化车间的热浸镀锌规范 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
| BS EN 1078-1997 | 骑自行车的人和滑板及旱冰鞋使用者用的防护帽 | Helmets for pedal cyclists and for users of skateboards and roller skates |
| BS EN 1175-1-1998 | 工业货车安全.电气要求.电池供电货车的一般要求 | Safety of industrial trucks - Electrical requirements - General requirements for battery powered trucks |
| BS EN 1175-2-1998 | 工业货车安全.电气要求.装有内燃机货车的一般要求 | Safety of industrial trucks - Electrical requirements - General requirements for internal combustion engine powered trucks |
| BS EN 1175-3-1998 | 工业货车安全.电气要求.装有内燃机货车的供电系统特殊要求 | Safety of industrial trucks - Electrical requirements - Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
| BS EN 12053-2001 | 工业货车安全.噪声辐射测量试验方法 | Safety of industrial trucks - Test methods for measuring noise emissions |
| BS EN 12080-1998 | 铁路设施.车箱体.滚动轴承 | Railway applications - Axleboxes - Rolling bearings |
| BS EN 12081-1998 | 铁路设施.车箱体.润滑脂 | Railway applications - Axleboxes - Lubricating greases |
| BS EN 12082-1998 | 铁路设施.车箱体.性能测试 | Railway applications - Axleboxes - Performance testing |
| BS EN 12184-1999 | 电动轮椅、小型摩托车及其充电器.要求和试验方法 | Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods |
| BS EN 12195-1-2003 | 道路车辆上的装载物固定组件.安全.捆绑力的计算 | Load restraint assemblies on road vehicles - Safety - Calculation of lashing forces |
| BS EN 12195-2-2001 | 道路车辆的负载限动组件.安全性.人造纤维网绳 | Load restraint assemblies on road vehicles - Safety - Web lashing made from man-made fibres |
| BS EN 12195-3-2001 | 道路车辆上物件的系固用具.安全.捆绑链 | Load restraint assemblies on road vehicles - Safety - Lashing chains |
| BS EN 12195-4-2003 | 道路车辆上负荷系固组件.安全性.第4部分:捆绑钢丝绳 | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
| BS EN 12252-2005 | 液化石油气(LPG)设备和附件.液化石油气公路槽车装备 | LPG equipment and accessories - Equipping of LPG road tankers |
| BS EN 12312-11-2005 | 航空器地面支持设备.特殊要求.第11部分:容器/集装箱推车和可拆卸载重拖车 | Aircraft ground support equipment - Specific requirements - Container/pallet dollies and loose load trailers |
| BS EN 12312-14-2006 | 航空器地面支持设备.特殊要求.伤残的/丧失劳动能力的乘客登机车辆 | Aircraft ground support equipment - Specific requirements - Disabled/incapacitated passenger boarding vehicles |
| BS EN 12312-2-2002 | 飞行器地面支持设备.特殊要求.餐饮车 | Aircraft ground support equipment - Specific requirements - Catering vehicles |
| BS EN 124-1994 | 车辆和行人道区域的排水沟盖和人孔盖.设计要求、型号试验、标志、质量控制 | Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
| BS EN 12414-1999 | 车辆停泊控制设备.付款和出票机器.技术和功能要求 | Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements |
| BS EN 12415-2001 | 机床安全性.小型数控车床和车削中心 | Safety of machine tools - Small numerically controlled turning machines and turning centres |
| BS EN 12424-2000 | 工业、商业和汽车库门.抗风力.分类 | Industrial, commercial and garage doors and gates - Resistance to wind load - Classification |
| BS EN 12425-2000 | 工业、商业和汽车库门.防水渗透性.分类 | Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification |
| BS EN 12426-2000 | 工业、商业和汽车库门.透气率.分类 | Industrial, commercial and garage doors and gates - Air permeability - Classification |
| BS EN 12427-2000 | 工业、商业和汽车库门.透气率.试验方法 | Industrial, commercial and garage doors and gates - Air permeability - Test method |
| BS EN 12428-2000 | 工业、商业和汽车库门.热传递.计算要求 | Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation |
| BS EN 12433-1-2000 | 工业、商业和车库用门.术语.门的类型 | Industrial, commercial, and garage doors and gates - Terminology - Types of doors |
| BS EN 12433-2-2000 | 工业、商业和车库用门.术语.门的零件 | Industrial, commercial, and garage doors and gates - Terminology - Parts of doors |
| BS EN 12444-2001 | 工业、商业和车库门.抗风载荷性.试验和计算 | Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation |
| BS EN 12445-2001 | 工业、商业和车库用门.动力操纵门的使用安全性.试验方法 | Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods |
| BS EN 12453-2001 | 工业、商业和车库门.动力操纵门的使用安全.要求 | Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements |
| BS EN 12478-2001 | 机床的安全.大型数控车床和车削中心 | Safety of machine tools - Large numerically controlled turning machines and turning centres |
| BS EN 12489-2000 | 工业、商业和汽车用门.抗水渗透性.试验方法 | Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method |
| BS EN 12493-2001 | 液化石油气(LPG)用焊接钢罐.槽罐车.设计和生产 | Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture |
| BS EN 12561-1-1999 | 铁路工具.有轨车.危险货物运输油罐车标记 | Railway applications - Tank wagons - Marking of tank wagons for the carriage of dangerous goods |
| BS EN 12561-2-2003 | 铁路设施.油罐车.包括回流蒸气的液体产品用底部卸料装置 | Railway applications - Tank wagons - Bottom emptying devices for liquid products including vapour return |
| BS EN 12561-3-2003 | 铁路设施.油罐车.压力下液化气用底部装卸装置 | Railway applications - Tank wagons - Bottom filling and emptying devices for gases liquefied under pressure |
| BS EN 12561-4-2003 | 铁路设施.油罐车.液态产品用顶部装卸装置 | Railway applications - Tank wagons - Top devices for top emptying and filling of liquid products |
| BS EN 12561-5-2003 | 铁路设施.油罐车.液态产品用顶部装填和底部卸料顶部装置 | Railway applications - Tank wagons - Top devices for bottom emptying and top filling of liquid products |
| BS EN 12561-6-2003 | 铁路设施.油罐车.人孔 | Railway applications - Tank wagons - Manholes |
| BS EN 12561-7-2004 | 铁路设施.油罐车.月台和梯子 | Railway applications - Tank wagons - Platforms and ladders |
| BS EN 12561-8-2004 | 铁路设施.油罐车.加热连接件 | Railway applications - Tank wagons - Heating connections |
| BS EN 12604-2000 | 工业,商业和车间门.机械性能.要求 | Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements |
| BS EN 12605-2000 | 工业,商业和车间门.机械性能.试验方法 | Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods |
| BS EN 12635-2002 | 工业、商业和车库的门和大门.安装与使用 | Industrial, commercial and garage doors and gates - Installation and use |
| BS EN 12640-2001 | 货物和道路车辆的安全.货物运输用商业车辆的挂车点.最低要求和试验 | Securing of cargo on road vehicles - Lashing points on commercial vehicles for goods transportation - Minimum requirements and testing |
| BS EN 12641-1-2005 | 可换式车箱和商用车辆.防水油布.最低要求 | Swap bodies and commercial vehicles - Tarpaulins - Part 1: Minimum requirements |
| BS EN 12641-2-2006 | 互换车体和商用车辆.防水油布.第2部分:布帘厢式车辆的最低要求 | Swap bodies and commercial vehicles — Tarpaulins — Part 2: Minimum requirements for curtainsiders |
| BS EN 12642-2006 | 道路车辆上货物安全.商用车辆的车体结构.最低要求 | Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements |
| BS EN 12645-1999 | 压力量规.机动车轮胎膨胀和/或压力检验设备.计量学,要求和试验 | Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing |
| BS EN 12663-2000 | 铁路设施.铁路车辆车身结构要求 | Railway applications - Structural requirements of railway vehicle bodies |
| BS EN 12674-2-2002 | 车载集装箱.一般设计和安全性原则 | Roll containers - General design and safety principles |
| BS EN 1273-2005 | 儿童使用和护理用品.婴儿学步车.安全性要求和试验方法 | Child use and care articles - Baby walking frames - Safety requirements and test methods |
| BS EN 12736-2002 | 电力驱动的道路车辆.用运载工具车上带的充电器充电过程中车辆在空中发出的噪声.声功率水平的测定 | Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level |
| BS EN 12757-1-2005 | 涂层材料用搅拌机械.安全要求.车辆表面整修用的搅料机械 | Mixing machinery for coating materials - Safety requirements - Mixing machinery for use in vehicle refinishing |
| BS EN 12805-2002 | 汽车用液化石油气部件.容器 | Automotive LPG components - Containers |
| BS EN 12806-2003 | 机动车用液化石油气部件.不包括容器 | Automotive liquefied petroleum gas components - Other than containers |
| BS EN 12895-2000 | 工业货车.电磁兼容性 | Industrial trucks - Electromagnetic compability |
| BS EN 12929-2-2004 | 载人用索道装置的安全要求.一般要求.不带重货运输车式刹车的双向双线架空索道的附加要求 | Safety requirments for cableways installations designed to carry persons - General requirements - Additional reqirments for reversible bicable aerial ropeways without carrier truck brakes |
| BS EN 12978-2003 | 工业、商业和车库用门.电动门的安全装置.要求和试验方法 | Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
| BS EN 12979-2002 | 汽车液化石油气设备.安装要求 | Automotive LPG systems - Installation requirements |
| BS EN 13043-2002 | 道路、机场和其他行车区域用的沥青混合物和表面处理用集料 | Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
| BS EN 13059-2002 | 工业用车辆的安全性.振动测量的试验方法 | Safety of industrial trucks - Test methods for measuring vibration |
| BS EN 13103-2001 | 铁路设施.轮副和行车机构.非动力轴.设计方法 | Railway applications - Wheelsets and bogies - Non-powered axles - Design method |
| BS EN 13104-2001 | 铁路设施.轮副和行车机构.动力轴.设计方法 | Railway applications - Wheelsets and bogies - Powered axles - Design method |
| BS EN 13129-1-2002 | 铁路设施.主干线铁路机车车辆用空调.舒适度参数 | Railway applications - Air conditioning for main line rolling stock - Comfort parameters |
| BS EN 13129-2-2004 | 铁路设施.主干线铁路车辆用空调.典型试验 | Railway applications - Air conditioning for main line rolling stock - Type tests |
| BS EN 13149-1-2004 | 公共交通.道路车辆调度和控制系统.车载数据传输的WORLDFIP定义和应用规则 | Public transport - Road vehicle scheduling and control systems - WORLDFIP definition and application rules for onboard-data transmission |
| BS EN 13149-4-2004 | 公共运输.道路车辆调度和控制系统.CANopen运输车的一般应用规则 | Public transport - Road vehicle scheduling and control systems - General application rules for CANopen transmission buses |
| BS EN 13149-5-2004 | 公共运输.道路车辆调度和控制系统.CANopen电缆敷设规范 | Public transport - Road vehicle scheduling and control systems - CANopen cabling specifications |
| BS EN 1317-5-2007 | 道路限制系统.车辆限制系统用产品要求和合格评估 | Road restraint systems - Product requirements and evaluation of conformity for vehicle restraint systems |
| BS EN 13178-2000 | 人眼保护.雪地汽车使用者用护目器 | Personal eye protection - Eye protectors for snowmobile users |
| BS EN 13232-3-2003 | 铁路设施.轨道.铁路侧线和道岔口.车轮/钢轨相互作用要求 | Railway applications - Track - Switches and crossings - Requirements for wheel/rail interaction |
| BS EN 13241-1-2003 | 工业、商业和车库门及大门.产品标准.不耐火产品或具有烟控特性的产品 | Industrial, commercial and garage doors and gates - Product standard - Products without fire resistance or smoke control characteristics |
| BS EN 13262-2004 | 铁路设施.轮副和行车机构.轮子.生产要求 | Railway applications - Wheelsets and bogies - Wheels - Product requirement |
| BS EN 13272-2002 | 铁路设施.公共运输系统中机车车辆用电力照明 | Railway applications - Electrical lighting for rolling stock in public transport systems |
| BS EN 13308-2002 | 危险物品运输用槽罐车.槽罐车用辅助设备.无压力平衡底阀 | Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve |
| BS EN 13314-2002 | 危险物品运输用槽罐车.槽罐车用辅助设备.装填孔盖 | Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover |
| BS EN 13316-2002 | 危险物品运输用槽罐车.槽罐车用辅助设备.压力平衡底阀 | Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve |
| BS EN 13317-2002 | 危险物品运输用槽罐车.槽罐车用辅助设备.人孔盖组件 | Tanks for transport of dangerous goods - Service equipment for Tanks - Manhole cover assembly |
| BS EN 13367-2005 | 陶瓷机器.安全.传送平台和传送车 | Ceramic machines - Safety - Transfer platforms and cars |
| BS EN 13375-2005 | 防水用柔性薄板.混凝土船桥甲板和其他可通过车辆的混凝土表面的防水性.样品制备 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation |
| BS EN 13385-2002 | 可运输气瓶.永久的和液化的气体(乙炔除外)用蓄电池驱动车辆.灌装时的检验 | Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling |
| BS EN 13406-2002 | 农用机械.淤泥槽车和喷撒装置.环保.喷撒精度的要求和试验方法 | Agricultural machinery - Slurry tankers and spreading devices - Environmental protection - Requirements and test methods for the spreading precision |
| BS EN 13423-2000 | 压缩天然气车辆的使用 | Compressed natural gas vehicle operations |
| BS EN 13444-1-2001 | 电动道路车辆.复合式车辆排放测量.热电复合车辆 | Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Thermal electric hybrid vehicles |
| BS EN 13447-2001 | 电动道路车辆.术语 | Electrically propelled road vehicles - Terminology |
| BS EN 13490-2002 | 机械振动.工业货车.驾驶员座椅振动的实验室评定和规范 | Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration |
| BS EN 13594-2002 | 专业摩托车驾驶者用防护手套.要求和试验方法 | Protective gloves for professional motorcycle riders - Requirements and test methods |
| BS EN 13595-1-2002 | 专业摩托车驾驶者用防护手套.夹克、长裤、单件或套服.一般要求 | Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - General requirements |
| BS EN 13595-2-2002 | 摩托车专业驾驶者用的防护手套.夹克、长裤、单件或分离的套服.测定抗撞击摩擦力的试验方法 | Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Test method for determination of impact abrasion resistance |
| BS EN 13595-3-2002 | 专业摩托车驾驶者用防护手套.夹克、长裤、单件或套服.撕裂强度的测试方法 | Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Test method for determination of burst strength |
| BS EN 13595-4-2002 | 专业摩托车驾驶者用防护手套.夹克、长裤、单件或套服.冲击切割阻力的试验方法 | Protective clothing for professional motorcycle riders - Jackets, trousers and one piece or divided suits - Test methods for the determination of impact cut resistance |
| BS EN 13596-2005 | 防水用柔性薄板.混凝土船桥甲板和其他可通过车辆的混凝土表面的防水性.粘结强度的测定 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of bond strength |
| BS EN 13634-2002 | 专业摩托车驾驶者用防护鞋袜.要求和试验方法 | Protective footwear for professional motorcycle riders - Requirements and test methods |
| BS EN 13653-2005 | 防水用柔性薄板.混凝土船桥甲板和其他可通过车辆的混凝土表面的防水性.剪切强度的测定 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of shear strength |
| BS EN 13674-1-2003 | 铁路设施.轨道.钢轨.46kg/m及以上(列车)用丁字形铁轨 | Railway applications - Track - Rail - Vignole railway rails 46 kg/m and above |
| BS EN 13715-2006 | 铁路设施.轮副和转向架.车轮.车轮踏板 | Railway applications - Wheelsets and bogies - Wheels - Wheels tread |
| BS EN 13718-1-2002 | 航空、水域和困难地形区域用救护车.连续救护患者用医疗器械接口要求 | Air, water and difficult terrain ambulances - Medical devices interface requirements for the continuity of patient care |
| BS EN 13718-2-2002 | 航空、水域和困难地形区域用救护车.连续救护患者的操作和技术要求 | Air, water and difficult terrain ambulances - Operational and technical requirements for the continuity of patient care |
| BS EN 13760-2003 | 轻型和重型车辆用机动车液化石油气填充系统.喷油嘴试验要求和尺寸 | Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
| BS EN 13775-1-2003 | 铁路设施.新型和改造的货运车辆的测量.测量原则 | Railway applications - Measuring of new and modified freight wagons - Measuring principles |
| BS EN 13775-2-2003 | 铁路设施.新型和改造的货运车辆的测量.带转向架的货运车 | Railway applications - Measuring of new and modified freight wagons - Freight wagons with bogies |
| BS EN 13775-3-2003 | 铁路设施.新型和改造的货运车辆的测量.带2个轮副的货运车 | Railway applications - Measuring of new and modified freight wagons - Freight wagons with 2 wheelsets |
| BS EN 13775-4-2004 | 铁路设施.新型和改造的货运车辆的测量.带两个轮幅的转向架 | Railway applications - Measuring of new and modified freight wagons - Bogies with 2 wheelsets |
| BS EN 13775-5-2004 | 铁路设施.新型和改造的货运车辆的测量.带3个轮副的货运车 | Railway applications - Measuring of new and modified freight wagons - Bogies with 3 wheelsets |
| BS EN 13775-6-2004 | 铁路设施.新型和改造的货运车辆的测量.多用和绞接货运车辆 | Railway applications - Measuring of new and modified freight wagons - Multiple and articulated freight wagons |
| BS EN 13776-2002 | 液化石油气道路运输罐装车的灌装和卸料程序 | Filling and discharge procedures for LPG road tankers |
| BS EN 13788-2002 | 机床.安全性.多轴自动立式车床 | Machine tools - Safety - Multi-spindle automatic turning machines |
| BS EN 13796-1-2005 | 载人缆索装置的安全要求.运载装置.夹紧装置、运载车、车载制动器、舱、椅、车架、维修车、缆车架 | Safety requirements for cableway installations designed to carry persons - Carriers - Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
| BS EN 13807-2003 | 移动式气瓶.蓄电池车辆.设计、制造、标识和检验 | Transportable gas cylinders - Battery vehicles - Design, manufacture, identification and testing |
| BS EN 13848-2-2006 | 铁路设施.轨道.轨道几何质量.测量系统.轨道检查记录车 | Railway applications - Track - Track geometry quality - Measuring systems - Track recording vehicles |
| BS EN 13856-2002 | 汽车用液化石油气系统用户使用说明书内容的最低要求 | Minimum requirements for the content of the user manual for automotive LPG systems |
| BS EN 13878-2003 | 休闲度假用旅行房车.术语和定义 | Leisure accommodation vehicles - Terms and definitions |
| BS EN 13920-12-2003 | 铝和铝合金.废料.单一合金的车床切屑 | Aluminium and aluminium alloys - Scrap - Turnings consisting of one single alloy |
| BS EN 13920-13-2003 | 铝和铝合金.废料.含两种或多种合金的混合车床切屑 | Aluminium and aluminium alloys - Scrap - Mixed turnings consisting of two or more alloys |
| BS EN 13977-2005 | 铁路设施.轨道.建造和维修用便携式机械和手摇车的安全要求 | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| BS EN 13978-1-2005 | 预制混凝土产品.预制混凝土车库.房屋尺寸大小的整体式或连续单块式加筋车库的要求 | Precast concrete products - Precast concrete garages - Requirements for reinforced garages monolithic or consisting of single sections with room dimensions |
| BS EN 14010-2004 | 机械安全.摩托车的动力传动停车设备.设计、生产、装配和交付使用阶段的安全和EMC要求 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
| BS EN 14021-2003 | 防石头和瓦砾的越野摩托车车手保护用防石护罩.要求和试验方法 | Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods |
| BS EN 14116-2007 | 危险物品运输用槽罐车.产品识别装置用数字接口 | Tanks for transport of dangerous goods - Digital interface for the product recognition device |
| BS EN 14198-2005 | 铁路设施.制动.被机车牵引的列车的制动系统要求 | Railway applications - Braking - Requirements for the brake systems of trains hauled by a locomotive |
| BS EN 14214-2004 | 机动车燃料.柴油发动机用脂肪酸甲脂.要求和试验方法 | Automotive fuels - Fatty acid methylesters (FAME) for diesel engines - Requirements and test methods |
| BS EN 14223-2005 | 防水用软薄板.混凝土船桥甲板和其他车辆可通过的混凝土表面的防水.吸水率的测定 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption |
| BS EN 14224-2007 | 防水柔性薄板材.混凝土桥甲板和其他车辆可通过的混凝土表面的防水.断裂搭接能力的测定 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of crack bridging ability |
| BS EN 14274-2003 | 石油及其产品的试验方法.车用燃料.汽油及柴油质量的评估.燃料质量监测系统(FQMS) | Methods of test for petroleum and its products - Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS) |
| BS EN 14275-2003 | 车用燃料.汽油及柴油质量的评估.零售点油泵及商业点燃料自动售货机的抽样 | Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers |
| BS EN 14327-2004 | 皮革.物理和机械试验.汽车皮革耐磨性的测定 | Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather |
| BS EN 1433-2003 | 行车区域和行人区域用排水沟.分类、设计和试验要求、标记和合格性评定 | Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity |
| BS EN 14334-2005 | LPG槽罐车的检验和试验 | Inspection and testing of LPG road tankers |
| BS EN 14344-2004 | 儿童使用和护理用品.自行车用儿童座椅.安全要求和试验方法 | Child use and care articles - Child seats for cycles - Safety requirements and test methods |
| BS EN 14363-2005 | 铁路设施.铁路车辆运行特性的验收试验.运行性能试验和稳定性试验 | Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Testing of running behaviour and stationary tests |
| BS EN 14420-6-2004 | 带夹件的软管配件.第6部分:TW油槽车联接器 | Hose fittings with clamp units - Part 6: TW tank truck couplings |
| BS EN 14458-2004 | 个人护眼设备.消防员用面罩和护目镜及消防员、救护车和急救服务用高性能工业安全头盔 | Personal eye-equipment - Faceshields and visors for use with firefighters and high performance industrial safety helmets used by firefighters, ambulance and emergency services |
| BS EN 14535-1-2005 | 铁路设施.铁路车辆的制动盘.加压或热套到轴或驱动轴的制动盘的尺寸和质量要求 | Railway applications - Brake discs for railway rolling stock - Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements |
| BS EN 1459-1999 | 工业用卡车的安全性.可变延伸机动卡车 | Safety of industrial trucks - Self-propelled variable reach trucks |
| BS EN 14619-2005 | 滚轮运动设备.脚蹬踏板车.安全要求和试验方法 | Roller sports equipment - Kick scooters - Safety requirements and test methods |
| BS EN 14678-1-2006 | 液化石油气(LPG)设备和附件.汽车罐装设备用LPG设备的结构和性能.分配器 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Dispensers |
| BS EN 14691-2005 | 防水用柔性薄板.车辆可通过的混凝土船桥甲板和其他混凝土表面的防水.通过热调节测定兼容性 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Compatibility by heat conditioning |
| BS EN 14692-2005 | 防水用柔性薄板.车辆可通过的混凝土船桥甲板和其他混凝土表面的防水.沥青层耐压性测定 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer |
| BS EN 14693-2006 | 防水用柔性薄板.机动车行驶的混凝土桥面和其他混凝土路面的防水层.测定应用沥青砂胶的沥青薄板特性 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt |
| BS EN 14694-2005 | 防水用柔性薄板.车辆可通过的混凝土船桥甲板和其他混凝土路面的防水.预处理产生损坏后耐动态水压的测定 | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment |
| BS EN 14750-1-2006 | 铁路设施.城市和郊区全部车辆的空气调节装置.舒适参数 | Railway applications - Air conditioning for urban and suburban rolling stock - Comfort parameters |
| BS EN 14750-2-2006 | 铁路设施.城市和郊区全部车辆的空气调节装置.类型试验 | Railway applications - Air conditioning for urban and suburban rolling stock - Type tests |
| BS EN 14752-2005 | 铁路设施.车厢侧门系统 | Railway applications - Body entrance systems |
| BS EN 14764-2005 | 城市和远足自行车.安全要求和试验方法 | City and trekking bicycles - Safety requirements and test methods |
| BS EN 14765-2005 | 儿童自行车.安全要求和试验办法 | Bicycles for young children - Safety requirements and test methods |
| BS EN 14766-2005 | 山地车.安全和试验要求 | Mountain-bicycles - Safety requirements and test methods |
| BS EN 14781-2005 | 赛车.安全要求和试验方法 | Racing bicycles - Safety requirements and test methods |
| BS EN 14813-1-2006 | 铁路设施.机车驾驶室用空调.舒适参数 | Railway applications - Air conditioning for driving cabs - Comfort parameters |
| BS EN 14813-2-2006 | 铁路设施.机车驾驶室用空调.类型试验 | Railway applications - Air conditioning for driving cabs - Type tests |
| BS EN 14841-2005 | 液化石油气(LPG)设备和附件.LPG罐车的卸料程序 | LPG equipment and accessories - Discharge procedures for LPG rail tankers |
| BS EN 14865-2-2006 | 铁路设施.轴套润滑油.确保机车速度达到200km/h的机械稳定性试验的方法 | Railway applications - Axlebox lubricating greases - Method to test the mechanical stability to cover vehicle speeds up to 20 0 km/h |
| BS EN 14872-2006 | 自行车.自行车附件.行李架 | Bicycles - Accessories for bicycles - Luggage carriers |
| BS EN 1493-1999 | 车辆升降机 | Vehicle lifts |
| BS EN 1501-1-1998 | 垃圾收集车及其相关提升装置.一般要求和安全性要求.后部装载的垃圾收集车 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Rear-end loaded refuse collection vehicles |
| BS EN 1501-2-2005 | 垃圾收集运输车及其相关提升装置.一般要求和安全要求.侧面装载的垃圾收集运输车 | Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Side loaded refuse collection vehicles |
| BS EN 15020-2006 | 铁路设施.救援车挂钩.性能要求、专用连接体几何尺寸和试验方法 | Railway Applications. Rescue Coupler. Performance Requirements, Specific Interface Geometry and Test Methods |
| BS EN 15033-2006 | 利用LPG(液化石油气)生产车辆和小船用卫生热水的密封型贮水式热水器 | Room sealed storage water heaters for the production of sanitaryhot water using LPG for vehicles and boats |
| BS EN 15152-2007 | 铁路设施.火车驾驶室用前挡风玻璃 | Railway applications - Front windscreens for train cabs |
| BS EN 15153-1-2007 | 铁路设施.高速火车用外部可视和听得见的警告装置.头部、标记和尾灯 | Railway applications - External visible and audible warning devices for high speed trains - Head, marker and tail lamps |
| BS EN 15153-2-2007 | 铁路设施.高速火车用外部可视和听得见的警告装置.警告喇叭 | Railway applications - External visible and audible warning devices for high speed trains - Warning horns |
| BS EN 1525-1998 | 工业货车的安全性.无人驾驶货车及其系统 | Safety of industrial trucks - Driverless trucks and their systems |
| BS EN 1526-1998 | 工业货车的安全性.货车自动功能的附加要求 | Safety of industrial trucks - Additional requirements for automated functions on trucks |
| BS EN 15380-1-2006 | 铁路设施.铁路车辆用命名系统.一般原则 | Railway applications - Designation system for railway vehicles - Part 1: General principles |
| BS EN 1551-2000 | 工业用卡车的安全性.载重能力在10，000 kg 以上的自推进式卡车 | Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity |
| BS EN 1621-1-1998 | 摩托车驾驶员防机械冲击的防护服.冲击防护的试验方法和要求 | Motorcyclists' protective clothing against mechanical impact - Requirements and test methods for impact protectors |
| BS EN 1621-2-2003 | 摩托车驾驶员防机械冲击的防护服.摩托车驾驶员背部防护装置.试验方法和要求 | Motorcyclists' protective clothing against mechanical impact - Motorcyclists back protectors - Requirements and test methods |
| BS EN 1645-1-2005 | 休闲旅居车辆.居住挂车.与健康和安全性有关的居住要求 | Leisure accommodation vehicles - Caravans - Habitation requirements relating to health and safety |
| BS EN 1645-2-1999 | 休闲旅居车辆.旅居挂车.使用有效载荷 | Leisure accommodation vehicles - Caravans - User payloads |
| BS EN 1646-1-2005 | 休闲居住车.电动旅居挂车.与健康和安全有关的居住要求 | Leisure accommodation vehicles - Motor caravans - Habitation requirements relating to health and safety |
| BS EN 1646-2-1999 | 休闲旅居车辆.旅居机动挂车.使用有效载荷 | Leisure accommodation vehicles - Motor caravans - User payloads |
| BS EN 1647-2005 | 休闲居住车.休假旅居挂车.与健康和安全有关的居住要求 | Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety |
| BS EN 1648-1-2005 | 休闲旅居车辆.12V直流超低压电器装置.旅居挂车 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Caravans |
| BS EN 1648-2-2005 | 休闲旅居车辆.12V直流超低压电器装置.机动旅居挂车 | Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Motor caravans |
| BS EN 1726-1-1999 | 工业货车的安全.荷载能力至10000Kg的自行货车和拉杆拉力至20000N的工业牵引车.一般要求 | Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. General requirements |
| BS EN 1726-2-2000 | 工业货车的安全.荷载能力至10000Kg的自行货车和拉杆拉力至20000N的工业牵引车.带高架驾驶位的货车和专为超 | Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads |
| BS EN 1755-2000 | 工业用卡车的安全.在潜在爆炸气体环境下的工作.在可燃气体,蒸气,潮湿和灰尘下使用 | Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust |
| BS EN 1756-1-2002 | 后置提升机.轮式车辆上安装的平台提升机.安全性要求.运货用的车辆后置提升机 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Tail lifts for goods |
| BS EN 1757-1-2001 | 工业货车安全.脚踏货车.叉车 | Safety of industrial trucks - Pedestrian propelled trucks - Stacker trucks |
| BS EN 1757-2-2001 | 工业货车安全.脚踏货车.托盘货车 | Safety of industrial trucks - Pedestrian propelled trucks - Pallet trucks |
| BS EN 1757-3-2002 | 工业货车安全.脚踏货车.平板车 | Safety of industrial trucks - Pedestrian propelled trucks - Platform trucks |
| BS EN 1757-4-2003 | 工业货车安全.脚踏货车.杠杆式升降机货盘式货车 | Safety of industrial trucks - Pedestrian propelled trucks - Scissor lift pallet-trucks |
| BS EN 1761-1999 | 燃料卡车交付的橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for fuel truck delivery - Specification |
| BS EN 1789-2007 | 医疗车辆和其设备.道路救护车 | Medical vehicles and their equipment - Road ambulances |
| BS EN 1821-1-1997 | 电动道路车辆.道路运力测量.纯电动车辆 | Electrically propelled road vehicles - Measurement of road operating ability - Pure electric vehicles |
| BS EN 1821-2-1999 | 电动道路车辆.道路通行能力的测量.热电动复合动力车 | Electrically propelled road vehicles - Measurement of road operating ability - Thermal electric hybrid vehicles |
| BS EN 1846-1-1998 | 消防车和救援车.名称与命名符号 | Firefighting and rescue service vehicles - Nomenclature and designation |
| BS EN 1846-2-2002 | 消防车和救援车.通用要求.安全性和性能 | Firefighting and rescue service vehicles - Common requirements - Safety and performance |
| BS EN 1846-3-2004 | 消防车和救援车.固定安装设备.安全和性能 | Firefighting and rescue service vehicles - Permanently installed equipment - Safety and performance |
| BS EN 1853-1999 | 农业机械.带倾卸车身的挂车.安全 | Agricultural machinery - Trailers with tipping body - Safety |
| BS EN 1865-2000 | 道路救护车用的担架和其它病人处理设备的规范 | Specifications for stretchers and other patient handling equipment used in road ambulances |
| BS EN 1888-2003 | 护理儿童用品.轮式儿童车辆.安全要求和试验方法 | Child care articles - Wheeled child conveyances - Safety requirements and test methods |
| BS EN 1889-2-2003 | 地下采矿机械.移动式机械地下作业.安全.轨式机车 | Machines for underground mines - Mobile machines working underground - Safety - Rail locomotives |
| BS EN 1929-1-1998 | 篮式推车.带或不带儿童乘坐设备的篮式推车的试验和要求 | Basket trolleys - Requirements and tests for basket trolleys with or without a child carrying facility |
| BS EN 1929-2-2004 | 篮式手推车.用于载客传送带的有或无儿童乘坐设备的篮式手推车的要求、试验和检验 | Basket trolleys - Requirements, tests and inspection for basket trolleys with of without a child carrying facility, intended to be used on passenger conveyors |
| BS EN 1929-3-2005 | 篮式手推车.有或无儿童乘坐设备的带附加载货设施的篮式手推车的要求和试验 | Basket trolleys - Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility |
| BS EN 1929-4-2005 | 篮式手推车.用于载客传送带的有或无儿童乘坐设备的带附加载货设施的篮式手推车的要求和试验 | Basket trolleys - Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility, intended to be used on passenger conveyors |
| BS EN 1929-7-2005 | 篮式手推车.带婴儿或儿童乘坐设备的篮式手推车的要求和试验 | Basket trolleys - Requirements and tests for basket trolleys with baby and child carrying facilities |
| BS EN 1938-1999 | 个人眼睛保护.摩托车和机动脚踏两用车护目镜 | Personal eye protection - Goggles for motorcycle and moped users |
| BS EN 1947-2002 | 消防软水管.消防泵和车用半刚性输送软水管和水管组件 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| BS EN 1949-2002 | 休闲旅居活动车和其他道路车内居住用的石油液化气系统的安装规范 | Specification for the installation of LPG systems for habitation purpose s in leisure accommodation vehicles and in other vehicles |
| BS EN 1986-1-1997 | 电动道路车辆.能量特性测定.纯电动车 | Electrically propelled road vehicles - Measurement of energy performances - Pure electric vehicles |
| BS EN 1986-2-2001 | 电动道路车辆.能量特性测定.热电复式动力车 | Electrically propelled road vehicles - Measurement of energy performances - Thermal electric hybrid vehicles |
| BS EN 1987-1-1997 | 电车.特殊安全要求.储能板 | Electrically propelled road vehicles - Specific requirements for safety - On board energy storage |
| BS EN 1987-2-1997 | 电车.特殊安全要求.功能安全措施和失效防护 | Electrically propelled road vehicles - Specific requirements for safety - Functional safety means and protection against failures |
| BS EN 1987-3-1998 | 电车.特殊安全要求.乘客电伤害防护措施 | Electrically propelled road vehicles - Specific requirements for safety - Protection of users against electrical hazards |
| BS EN 228-2004 | 机动车燃料.无铅汽油.要求和试验方法 | Automotive fuels - Unleaded petrol - Requirements and test methods |
| BS EN 286-2-1992 | 装空气或氮气用简单不用火加热的压力容器.汽车和拖车气动刹车和辅助系统用压力容器规范 | Simple unfired pressure vessels designed to contain air or nitrogen - Specification for pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers |
| BS EN 286-3-1995 | 装空气或氮气用的不用火加热的一般压力容器.第3部分:用于铁路运输车辆空气制动和辅助气动设备的钢制压力容 | Simple unfired pressure vessels designed to contain air or nitrogen - Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| BS EN 286-4-1995 | 装空气或氮气用的不点火加热的一般压力容器.第4部分:用于铁路运输车辆空气制动和辅助气动设备的铝合金压力 | Simple unfired pressure vessels designed to contain air or nitrogen - Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| BS EN 29367-1-1991 | 滚装船汽车捆绑和固定装置一般要求.第1部分:商业用车辆和车辆组合(半挂车除外). | Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Commercial vehicles and combinations of vehicles, semi-trailers excluded |
| BS EN 29367-2-1994 | 滚装船汽车捆绑和固定装置一般要求.第2部分:半挂车 | Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Semi-trailers |
| BS EN 30326-1-1994 | 机械振动.车座振动实验室评定方法.基本要求 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Basic requirements |
| BS EN 474-6-1997 | 土方机械.安全性.翻斗车的要求 | Earth-moving machinery - Safety - Requirements for dumpers |
| BS EN 474-6-2006 | 土方机械.安全.第6部分:垃圾倾倒车的要求 | Earth-moving machinery - Safety - Part 6: Requirements for dumpers- |
| BS EN 50066-1993 | 道路车辆交流电源供电设备用小型连接器规范 | Specification for mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles |
| BS EN 50121-3-1-2006 | 铁路设施.电磁兼容性.机车车辆.火车及配套车辆 | Railway applications - Electromagnetic compatibility - Rolling stock - Train and complete vehicle |
| BS EN 50121-3-2-2006 | 铁路设施.电磁兼容性.机车车辆.仪表 | Railway applications - Electromagnetic compatibility - Rolling stock - Apparatus |
| BS EN 50125-1-1999 | 铁路设施.设备环境条件.平板车载设备 | Railway applications - Environmental conditions for equipment - Equipment on board rolling stock |
| BS EN 50148-1996 | 出租车电子计程表 | Electronic taximeters |
| BS EN 50153-2003 | 铁路设施.铁路车辆.有关电气事故的防护措施 | Railway applications - Rolling stock - Protective provisions relating to electrical hazards |
| BS EN 50155-2007 | 铁路设施.铁道车辆用电子设备 | Railway applications - Electronic equipment used on rolling stock |
| BS EN 50194-2-2006 | 家庭房屋中可燃气体检测用电气设备.第2部分:娱乐车辆和类似经营场所中固定装置连续运转用电气设备.附加试验 | Electrical apparatus for the detection of combustible gases in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirements |
| BS EN 50206-1-1999 | 铁路设施.轨道车辆.集电器:特征和试验.干线车辆的集电器 | Railway applications - Rolling stock - Pantographs: characteristics and tests - Pantographs for main line vehicles |
| BS EN 50206-2-1999 | 铁路设施.轨道车辆.集电器:特征和试验.城市铁路和轻轨车辆用的集电器 | Railway applications - Rolling stock - Pantographs: characteristics and tests - Pantographs for metros and light rail vehicles |
| BS EN 50215-1999 | 铁路设施.竣工后投入使用前机车车辆的检验 | Railway applications - Testing of rolling stock after completion of construction and before entry into service |
| BS EN 50238-2003 | 铁路设施.机车车辆和列车检测系统间的兼容性 | Railway applications - Compatibility between rolling stock and train detection systems |
| BS EN 50239-2000 | 铁路设施.货运牵引车辆无线电遥控系统 | Railway applications - Radio remote control system of traction vehicle for freight traffic |
| BS EN 50264-1-2002 | 铁路设施.有特殊防火性能的铁路机车车辆电缆.标准壁厚.一般要求 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - General requirements |
| BS EN 50264-2-2002 | 铁路设施.有特殊防火性能的铁路机车车辆电缆.标准壁厚.单芯电缆 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Single core cables |
| BS EN 50264-3-2002 | 铁路设施.有特殊防火性能的铁路机车车辆电缆.标准壁厚.多芯电缆 | Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Multicore cables |
| BS EN 50305-2002 | 铁道设施.具有特别防火性能的铁道机车车辆.试验方法 | Railway applications - Railway rolling stock cables having special fire performance - Test methods |
| BS EN 50306-1-2002 | 铁路设施.有专门防火性能的铁路机车车辆电缆.薄壁.一般要求 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - General requirements |
| BS EN 50306-2-2002 | 铁路设施.有专门防火性能的铁路机车车辆电缆.薄壁.单芯电缆 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core cables |
| BS EN 50306-3-2002 | 铁路设施.有专门防火性能的铁路机车车辆电缆.薄壁.单芯和多芯电缆(双芯、三芯和四芯)的屏障及薄壁护套 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed |
| BS EN 50306-4-2002 | 铁路设施.有专门防火性能的铁路机车车辆电缆.薄壁.标准壁护套的多芯和多对电缆 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Multicore and multipair cables standard wall sheathed |
| BS EN 50311-2003 | 铁路设施.机车车辆.照明荧光灯用直流电子镇流器 | Railway applications - Rolling stock - D.C. supplied electronic ballasts for lighting fluorescent lamps |
| BS EN 50343-2003 | 铁路设施.铁路车辆.电缆敷设的安装规则 | Railway applications - Rolling stock - Rules for installation of cabling |
| BS EN 50355-2003 | 铁路设施.有特殊防火效能的铁路机车电缆.薄壁和标准壁.使用指南 | Railway applications - Railway rolling stock cables having special fire performance - Thin wall and standard wall - Guide to use |
| BS EN 50374-2004 | 导向车 | Conductor cars |
| BS EN 50388-2005 | 铁路设施.电源设备和铁路车辆.为达到互操作性的电源设备(变电站)和铁路车辆间配合的技术标准 | Railway applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability |
| BS EN 50436-1-2005 | 酒精联动装置.试验方法和性能要求.检查酒后驾车肇事者的仪器 | Alcohol interlocks - Test methods and performance requirements - Instruments for drink-driving-offender programs |
| BS EN 55012-2002 | 车辆,船舶,内燃机驱动装置.无线电干扰特性.（不包括那些在车辆/小船/驱动装置中自身安装的接收机或其附近车 | Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices |
| BS EN 55025-2003 | 车载、船载和设备上的接收机抗无线电干扰特征.限值和测量方法 | Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement |
| BS EN 589-2004 | 机动车用燃料.液化石油气(LPG).要求和试验方法 | Automotive fuels - LPG - Requirements and test methods |
| BS EN 590-2004 | 机动车燃料.柴油.要求和试验方法 | Automotive fuels - Diesel - Requirements and test methods |
| BS EN 60034-2-1999 | 旋转电机.旋转电机械的损耗和效率的试验测定方法(不包括牵引车辆用电机) | Rotating electrical machines - Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) |
| BS EN 60077-1-2003 | 铁路设施.机车车辆用电气设备.一般服务条件和一般规则 | Railway applications - Electric equipment for rolling stock - General service conditions and general rules |
| BS EN 60077-2-2003 | 铁路设施.机车车辆用电气设备.电气元件.一般规则 | Railway applications - Electric equipment for rolling stock - Electrotechnical components - General rules |
| BS EN 60077-3-2003 | 铁路设施.机车车辆用电气设备.电气部件.直流断路器规则 | Railway applications - Electric equipment for rolling stock - Electrotechnical components - Rules for d.c. circuit-breakers |
| BS EN 60077-4-2003 | 铁路设施.机车车辆用电气设备.电工元件.交流断路器规则 | Railway applications - Electric equipment for rolling stock - Electrotechnical components - Rules for AC circuit-breakers |
| BS EN 60077-5-2003 | 铁路设施.铁路车辆用电气设备.电工元件.HV熔断器规则 | Railway applications - Electrotechnical equipment for rolling stock - Electrotechnical components - Rules for HV fuses |
| BS EN 60095-4-1993 | 铅酸启动蓄电池组.第4部分:重型商用车辆用蓄电池组的尺寸 | Lead-acid starter batteries - Dimensions of batteries for heavy commercial vehicles |
| BS EN 60310-2004 | 铁路设施.铁道车辆上的牵引变压器和电感器 | Railway applications - Traction transformers and inductors on board rolling stock |
| BS EN 60322-2001 | 铁路.铁道车辆电气设备.开放结构电源电阻器规则 | Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction |
| BS EN 60335-2-95-2004 | 家用和类似用途电器.安全.住宅用垂直移动汽车库门驱动装置的特殊要求 | Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use |
| BS EN 60349-1-2000 | 铁路用途.铁路与公路车辆用旋转电机.用于除电子变换器馈电交流电动机之外的机器 | Railway applications - Rotating electrical machines for rail and road vehicles - Machines other than electronic convertor-fed alternating current motors |
| BS EN 60349-2-2001 | 铁路设施.铁路和公路车辆用旋转电机.电子变流器馈电交流电动机 | Railway applications - Rotating electrical machines for rail and road vehicles - Electronic convertor-fed alternating current motors |
| BS EN 60357-2003 | 卤钨灯(非车辆用).性能规范 | Tungsten halogen lamps (non-vehicle) - Performance specifications |
| BS EN 60432-3-2003 | 白炽灯安全规范.卤钨灯(非车用) | Incandescent lamps - Safety specifications - Tungsten-halogen lamps (non-vehicle) |
| BS EN 60721-3-5-1997 | 环境条件分类.第3部分:环境参数组及其严酷程度分类.第5节:地面车辆装配 | Classification of environmental conditions - Classification of groups of environmental parameters and their severities - Ground vehicle installations |
| BS EN 60809-1996 | 道路车辆用白炽灯.尺寸、电气性能和照度要求 | Lamps for road vehicles - Dimensional, electrical and luminous requirements |
| BS EN 60810-2003 | 道路车辆用灯.性能要求 | Lamps for road vehicles - Performance requirements |
| BS EN 61287-1-2006 | 铁路设施.安装在铁路机车上的功率变换器.第1部分:特征和试验方法 | Railway applications - Power convertors installed on board rolling stock - Part 1: Characteristics and test methods |
| BS EN 61373-1999 | 铁路设施.机车车辆设备.冲击和振动试验 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| BS EN 61377-1-2006 | 铁路设施.机车车辆.反向供电交流电动机及其控制系统的联合测试 | Railway applications - Rolling stock - Combined testing of inverter-fed alternating current motors and their control system |
| BS EN 61377-2-2003 | 铁路设施.机车车辆.联合试验.断路直流牵引电动机及其控制设备 | Railway applications - Rolling stock - Combined testing - Chopper-fed direct current traction motors and their control |
| BS EN 61377-3-2003 | 铁路设施.铁路车辆.由间接变流器馈电的交流电动机及其控制系统的联合检验 | Railway applications - Rolling stock - Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
| BS EN 61851-1-2001 | 电动车辆感应加载系统.一般要求 | Electric vehicle conductive charging system - General requirements |
| BS EN 61851-21-2002 | 电动车辆导电充电系统.导电连接至交流/直流的电动车辆要求.电源 | Electric vehicle conductive charging system - Electric vehicle requirements for conductive connection to an a.c./d.c - supply |
| BS EN 61851-22-2002 | 电动车辆导电充电系统.交流电动车辆充电站 | Electric vehicle conductive charging system - A.C. electric vehicle charging station |
| BS EN 61881-2000 | 铁路设施.机车车辆设备.电源电子装置电容器 | Railway applications - Rolling stock equipment - Capacitors for power electronics |
| BS EN 61982-1-2006 | 电动道路车辆推进用蓄电池.第1部分:试验参数 | Secondary batteries for the propulsion of electric road vehicles -Part 1: Test parameters |
| BS EN 61982-2-2003 | 电动道路车辆驱动用二次电池.动态放电性能试验和动态耐久试验 | Secondary batteries for the propulsion of electric road vehicles - Dynamic discharge performance test and dynamic endurance test |
| BS EN 61982-3-2002 | 道路电气车辆推进用的二次蓄电池.性能和寿命试验(与交通相容的城市车辆) | Secondary batteries for the propulsion of electric road vehicles - Performance and life testing (traffic compatible, urban use vehicles) |
| BS EN 62022-2007 | 由车辆运输的可循环利用或不可循环利用材料中γ辐射的控制和检测用已安装的监测器 | Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles |
| BS EN 62196-1-2004 | 电气机车输入端和机车连接器用插头和插座.电气机车传导冲电.250A交流和400A直流及以下的电气机车充电 | Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Charging of electric vehicles up to 250 A a.c. and 400 A d.c |
| BS EN 624-2000 | 专用液化石油气器具规范.车辆和小船中安装的房间用密封式液化石油气空间加热设备 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| BS EN 721-2005 | 休闲住宿车辆.安全通风要求 | Leisure accommodation vehicles - Safety ventilation requirements |
| BS EN 722-1-2005 | 休闲旅居车辆.液体燃料加热系统.居住挂车和休闲居住车 | Leisure accommodation vehicles - Liquid fuel heating systems - Caravans and caravan holiday homes |
| BS EN 957-10-2005 | 固定的训练器材.带固定轮或无活动轮的训练用自行车的附加特定安全要求和试验方法 | Stationary training equipment - Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods |
| BS EN 957-6-2001 | 固定的训练器材.踏车.补充特殊安全要求和试验方法 | Stationary training equipment - Treadmills, additional specific safety requirements and test methods |
| BS EN ISO 11439-2000 | 气瓶.车上贮存机动车用天然气燃料用高压气瓶 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| BS EN ISO 11446-2004 | 道路车辆.牵引车和挂车的电气连接用连接器.标称电源电压为12V的车辆用13极连接器 | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage |
| BS EN ISO 12215-4-2002 | 小艇.船体构造和船材尺寸.车间和生产 | Small craft - Hull construction and scantlings - Workshop and manufacturing |
| BS EN ISO 14460-1999 | 赛车驾驶员的防护服.对热和火焰的防护.性能要求和试验方法 | Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods |
| BS EN ISO 14505-2-2007 | 热环境的人类工效学.车辆热环境评估.等效温度测定 | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Determination of equivalent temperature |
| BS EN ISO 14505-3-2006 | 热环境人类工效学.车辆的热环境评估.人类热舒适性评估 | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Evaluation of thermal comfort using human subjects |
| BS EN ISO 14814-2006 | 道路运输和交通远程信息处理.自动车辆和设备识别.参考体系结构和术语 | Road transport and traffic telematics - Automatic vehicle and equipment identification - Reference architecture and terminology |
| BS EN ISO 14815-2005 | 道路运输与交通远程信息处理.自动车辆和设备识别.系统规范 | Road transport and traffic telematics - Automatic vehicle and equipment identification - System specifications |
| BS EN ISO 14816-2006 | 道路运输和交通远程信息处理.自动车辆和设备识别.编号和数据结构 | Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structure |
| BS EN ISO 15005-2002 | 道路车辆.运输信息和控制系统的人类工效学特性.对话管理原则和一致性程序 | Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures |
| BS EN ISO 15006-2004 | 道路车辆.交通信息和控制系统的人类工程学方面.车内声音信号表示规范和声顺性规程 | Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle auditory presentation |
| BS EN ISO 15007-1-2002 | 道路车辆.与运输信息和控制系统有关的司机目视行为的测量.定义和参数 | Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Definitions and parameters |
| BS EN ISO 15008-2003 | 道路车辆.运输信息和控制系统的人类工效学.车内视力表达规范和一致性规程 | Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle visual presentation |
| BS EN ISO 17287-2003 | 道路车辆.运输信息和控制系统的工效学.驾驶时适用性的评定规程 | Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving |
| BS EN ISO 20566-2005 | 涂料和清漆.实验室洗车测定涂层系统的耐划痕性 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash |
| BS EN ISO 20847-2004 | 石油及其产品的试验方法.BS 2000-496:石油产品.机动车燃料的硫含量的测定.能量分散X-射线荧光光谱法 | Methods of test for petroleum and its products - BS 2000-496: Petroleum products - Determination of the sulfur content of automotive fuels - Energy-dispersive X-ray fluorescence spectrometry |
| BS EN ISO 20884-2004 | 石油及其产品的试验方法.BS 2000-497:石油产品.机动车燃料的硫含量的测定.波长分散X-射线荧光光谱法 | Methods of test for petroleum and its products - BS 2000-497: Determination of sulfur content of automotive fuels - Wavelength- dispersive X-ray fluorescence spectrometry |
| BS EN ISO 21281-2005 | 自行式乘坐控制工业货车的踏板结构和布局.踏板结构和布局的原则 | Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks - Rules for the construction and layout of pedals |
| BS EN ISO 3095-2006 | 铁路设施.声学.有轨车辆发出的噪音测量 | Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles |
| BS EN ISO 3381-2006 | 铁路设施.声学.有轨车内噪声的测量 | Railway applications - Acoustics - Measurement of noise inside railbound vehicles |
| BS EN ISO 3450-1996 | 土方机械的安全.刹车系统规范和橡胶轮胎机械的性能要求和检验程序 | Safety of earth-moving machinery - Specification for braking systems and performance requirements and test procedures for rubber-tyred machines |
| BS EN ISO 4165-2003 | 道路车辆.电气连接装置.双极连接 | Road vehicles - Electrical connections - Double-pole connection |
| BS EN ISO 6115-1997 | 造船.拖网绞车 | Shipbuilding - Trawl winches |
| BS EN ISO 7284-1996 | 电阻焊设备.汽车工业用多点点焊的两个单独副线圈的变压器详细规范 | Resistance welding equipment - Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding as used in the automobile industry |
| BS EN ISO 8092-1-1998 | 道路车辆.车上电气布线线束的连接.单极连接接头用接线片.尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for single-pole connections - Dimensions and specific requirements |
| BS EN ISO 8092-2-2006 | 道路车辆.车载电气线束用连接器.定义、试验方法和一般性能要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Definitions, test methods and general performance requirements |
| BS EN ISO 8092-3-1999 | 道路车辆.车上安装电线束的连接.多极连接的标记.尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for multi-pole connections - Dimensions and specific requirements |
| BS EN ISO 8092-4-1999 | 道路车辆.车上安装电线束的连接.单极和多极连接用销钉.尺寸和特定要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Pins for single- and multi-pole connections - Dimensions and specific requirements |
| BS EN ISO 8795-2002 | 用于输送供人消耗用水的塑料管道系统.析出物渗移量的车测定.塑料管道、管件和连接件的析出物渗移量的测定 | Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints |
| BS EN ISO 9785-2002 | 船舶和海上技术.可行驶内燃机机动车的货舱空间的通风.需要的总气流量的理论计算 | Ship and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required |
| BS ISO 10056-2001 | 机械振动.铁路车辆里乘客和乘务员全身振动的测量和分析 | Mechanical vibration - Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles |
| BS ISO 10231-2003 | 摩托车轮胎.检验轮胎负荷的试验方法 | Motorcycle tyres - Test methods for verifying tyre capabilities |
| BS ISO 10326-2-2001 | 机械振动.评价车辆座椅振动的实验室方法.用于铁路车辆 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Application to railway vehicles |
| BS ISO 10521-1-2006 | 道路车辆.道路阻力加载.在参照大气条件下的测定 | Road vehicles - Road load - Determination under reference atmospheric conditions |
| BS ISO 10521-2-2006 | 道路车辆.道路阻力加载.底盘测功机上的再现 | Road vehicles - Road load - Reproduction on chassis dynamometer |
| BS ISO 10525-1998 | 长6m(20ft)及大于6m(20ft)的货运集装箱装卸用平衡式卡车.附加稳定性试验 | Counterbalanced trucks handling freight containers of 6 m (20 ft) length and above - Additional stability tests |
| BS ISO 10542-3-2006 | 残疾人或行动障碍人用技术设备和辅助装置.轮椅系固装置和乘车人安全束护系统.对接型系固装置 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Docking-type tiedown systems |
| BS ISO 10542-4-2004 | 残疾人或行动障碍人用技术系统和辅助设备.轮椅系固装置和乘车人安全束护系统.夹紧式系固装置 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant restraint systems - Clamping-type tiedown systems |
| BS ISO 10542-5-2004 | 残疾人或行动障碍人用技术设备和辅助装置.轮椅系固装置和乘车人安全束护系统.专用轮椅设备 | Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Systems for specific wheelchairs |
| BS ISO 10658-1997 | 用电动设备横向码放货物的特殊条件下的工业用卡车.附加的稳定性试验 | Industrial trucks operating in special conditions of stacking with load laterally displaced by powered devices - Additional stability test |
| BS ISO 10815-1997 | 机械振动.列车通过铁路隧道产生振动的测量 | Mechanical vibration - Measurement of vibration generated internally in railway tunnels by the passage of trains |
| BS ISO 10844-1995 | 声学.测量道路车辆发出噪音用试验车道规范 | Acoustics - Specification of test tracks for the purpose of measuring noise emitted by road vehicles |
| BS ISO 1103-2007 | 道路车辆.居住挂车和轻型挂车的联接球.尺寸 | Road vehicles - Coupling balls for caravans and light trailers - Dimensions |
| BS ISO 11096-2002 | 道路车辆.行人保护.步行者的大腿、小腿和膝的撞击试验方法 | Road vehicles - Pedestrian protection - Impact test method for pedestrian thigh, leg and knee |
| BS ISO 11157-2006 | 道路车辆.制动衬片组件.惯性测功机试验方法 | Road vehicles - Brake lining assemblies - Inertia dynamometer test method |
| BS ISO 11425-1997 | 机动车动力转向装置用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for automobile power-steering systems - Specification |
| BS ISO 11451-1-2005 | 道路车辆.窄带辐射的电磁能量产生的电子干扰的车辆试验方法.一般原则和术语 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - General principles and terminology |
| BS ISO 11451-3-2007 | 道路车辆.窄带辐射电磁能量的电干扰车辆试验方法.车载发射机模拟 | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - On-board transmitter simulation |
| BS ISO 11451-4-2006 | 道路车辆.窄带辐射电磁能量电器干扰的车辆试验方法.大电流量注入法(BCI) | Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Bulk current injection (BCI) |
| BS ISO 11452-4-2005 | 道路车辆.窄带辐射电磁能量产生的电干扰用部件试验方法.大容量电流注入(BCI) | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Bulk current injection (BCI) |
| BS ISO 11452-8-2007 | 道路车辆.窄带辐射电磁能量的电干扰元部件试验方法.磁场抗扰性 | Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Immunity to magnetic fields |
| BS ISO 11460-2007 | 两轮摩托车.照明和光信号装置的位置控制 | Two-wheeled motorcycles - Positioning of lighting and light-signalling devices |
| BS ISO 11486-2006 | 摩托车.用底盘测力计确定运行阻力的方法 | Motorcycles - Methods for setting the running resistance on a chassis dynamometer |
| BS ISO 11565-2007 | 道路车辆.火花塞.试验方法和要求 | Road vehicles - Spark-plugs - Test methods and requirements |
| BS ISO 11783-7-2002 | 农业和林业用牵引车和机械装置.系列控制和通信数据网.实施电文应用层 | Tractors and machinery for agriculture and forestry - Serial control and communications data network - Implement messages application layer |
| BS ISO 11841-1-2000 | 道路车辆和内燃发动机.滤清器词汇.滤清器和滤清器元件定义 | Road vehicles and internal combustion engines - Filter vocabulary - Definitions of filters and filter components |
| BS ISO 11841-2-2000 | 道路车辆和内燃发动机.滤清器词汇.滤清器及其元件特性的定义 | Road vehicles and internal combustion engines - Filter vocabulary - Definitions of characteristics of filters and their components |
| BS ISO 11898-3-2006 | 道路车辆.控制器区域网(CAN).低速、耐故障、依赖媒介的界面 | Road vehicles - Controller area network (CAN) - Low-speed, fault-tolerant, medium-dependent interface |
| BS ISO 11898-5-2007 | 道路车辆.控制器局域网络(CAN).低功率模式的高速媒体访问单元 | Road vehicles - Controller area network (CAN) - High-speed medium access unit with low-power mode |
| BS ISO 11992-4-2006 | 道路车辆.牵引和被牵引车辆之间电气连接的数字信息的交换.诊断 | Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Diagnostics |
| BS ISO 12097-1-2003 | 道路车辆.气囊部件.词汇 | Road vehicles - Airbag components - Vocabulary |
| BS ISO 12097-3-2003 | 道路车辆.气囊零部件.充气机组件的检验 | Road vehicles - Airbag components - Testing of inflator assemblies |
| BS ISO 12103-1-1998 | 道路车辆.过滤器评估用试验粉尘.第1部分:亚利桑那试验粉尘 | Road vehicles - Test dust for filter evaluation - Arizona test dust |
| BS ISO 12103-2-1998 | 道路车辆.过滤器评估用试验粉尘.氧化铝试验粉尘 | Road vehicles - Test dust for filter evaluation - Aluminium oxide test dust |
| BS ISO 12140-1999 | 农业机械.农用挂车和拖挂设备.牵引杆插孔 | Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks |
| BS ISO 12161-2006 | 道路车辆.电动机车和拖车耐制动系统.试验方法 | Road vehicles - Endurance braking systems of motor vehicles and towed vehicles - Test procedures |
| BS ISO 12214-2002 | 道路车辆.汽车手控装置的转向指示器 | Road vehicles - Direction-of-motion stereotypes for automotive hand controls |
| BS ISO 12353-1-2002 | 道路车辆.交通事故分析.词汇 | Road vehicles - Traffic accident analysis - Vocabulary |
| BS ISO 12353-2-2003 | 道路车辆.交通事故分析.严重冲击测量法的使用指南 | Road vehicles - Traffic accident analysis - Guidelines for the use of impact severity measures |
| BS ISO 12368-2001 | 农用车辆.牵引车辆上机械挂钩式连接件.试验方法和要求 | Agricultural vehicles - Mechanical hook-type connections on towing vehicles - Test methods and requirements |
| BS ISO 1275-2006 | 传动和输送机用双节距的精密滚子链、连接件和相关的车链齿轮 | Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors |
| BS ISO 13041-1-2004 | 数控立式车床和旋转中心的试验条件.带水平工件夹紧轴的机床的几何试验 | Test conditions for numeriaclly controlled turning machines and turning centres - Geometric tests for machines with a horizontal workholding spindle |
| BS ISO 13041-4-2004 | 数控立式车床和旋转中心的试验条件.平直和旋转轴定位的精确性和反复性 | Test conditions for numerically controlled turning machines and turning centres - Accuracy and repeatability of positioning of linear and rotary axes |
| BS ISO 13041-6-2005 | 数控立式车床和转向中心的试验条件.试样成品的精确度 | Test conditions for numerically controlled turning machines and turning centres - Accuracy of a finished test piece |
| BS ISO 13041-7-2004 | 数控立式车床和转向中心的试验条件.坐标平面上等高线特性评价 | Test conditions for numerically controlled turning machines and turning centres - Evaluation of contouring performance in the coordinate planes |
| BS ISO 13041-8-2004 | 数控立式车床和旋转中心的试验条件.热畸变的评价 | Test conditions for numerically controlled turning machines and turning centres - Evaluation of thermal distortions |
| BS ISO 13215-1-2006 | 道路车辆.降低儿童约束系统的误用风险.现场学习形式 | Road vehicles - Reduction of misuse risk of child restraint systems - Forms for field studies |
| BS ISO 13215-2-1999 | 道路车辆.减少儿童约束系统的误用危险.正确装配的要求和试验规程(平板法) | Road vehicles - Reduction of misuse risk of child restraint systems - Requirements and test procedures for correct installation (panel method) |
| BS ISO 13215-3-1999 | 道路车辆.减少儿童约束系统的误用危险.使用误用模式和效果分析(MMEA)对误用的预测和评估 | Road vehicles - Reduction of misuse risk of child restraint systems - Prediction and assessment of misuse by misuse mode and effect analysis (MMEA) |
| BS ISO 13216-1-2000 | 道路车辆.儿童约束系统在车内固定点及主固定电的安装.座椅座面和靠背之间的固定点及其安装 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Seat bight anchorages and attachments |
| BS ISO 13216-2-2005 | 道路车辆.儿童约束系统在车内的固定点及主固定点的安装.顶部系留的固定点及其连接 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Top tether anchorages and attachments |
| BS ISO 13216-3-2006 | 道路车辆.固定儿童约束系统用机动车和附属装置内的固定方式.儿童约束尺寸和车内空间的分类 | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Classification of child restraint dimensions and space in vehicle |
| BS ISO 13218-1998 | 道路车辆.儿童约束系统.有关儿童乘客事故的报告格式 | Road vehicles - Child restraint systems - Report form for accidents involving child passengers |
| BS ISO 13232-1-2006 | 摩托车.适用于摩托车驾驶员防碰撞装置的研究评价的试验和分析程序.定义、符号和一般考虑 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Definitions, symbols and general considerations |
| BS ISO 13232-2-2006 | 摩托车.适用于摩托车驾驶员防碰撞装置的研究评价的试验和分析程序.与事故数据相关的碰撞条件定义 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Definition of impact conditions in relation to accident data |
| BS ISO 13232-3-2006 | 摩托车.适用于摩托车驾驶员防碰撞装置的研究评价的试验和分析程序.摩托车手仿真碰撞假人 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Motorcyclist anthropometric impact dummy |
| BS ISO 13232-4-2006 | 摩托车.适用于摩托车驾驶员防碰撞装置的研究评价的试验和分析程序.被测量的变量、仪器仪表和测量规程 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Variables to be measured, instrumentation and measurement procedures |
| BS ISO 13232-5-2006 | 摩托车.适用于摩托车驾驶员防碰撞装置的研究评价的试验和分析程序.伤害指数和风险/利益分析 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Injury indices and risk/benefit analysis |
| BS ISO 13232-6-2006 | 摩托车.适用于摩托车驾驶员防碰撞装置的研究评价的试验和分析程序.实车碰撞试验规程 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Full-scale impact-test procedures |
| BS ISO 13232-7-2006 | 摩托车.适用于摩托车驾驶员防碰撞装置的研究评价的试验和分析程序.实施计算机模拟摩托车碰撞试验的标准化规 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Standardized procedures for performing computer simulations of motorcycle impact tests |
| BS ISO 13232-8-2006 | 摩托车.适用于摩托车驾驶员防碰撞装置的研究评价的试验和分析程序.文件和报告 | Motorcycles - Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles - Documentation and reports |
| BS ISO 13284-2003 | 叉式装卸车.叉形臂扩展部分和能自由伸缩的叉形臂.技术特性和强度要求 | Fork-lift trucks - Fork-arm extensions and telescopic fork arms - Technical characteristics and strength requirements |
| BS ISO 13476-1998 | 道路车辆.点火线圈.电气特性和试验方法 | Road vehicles - Ignition coils - Electrical characteristics and test methods |
| BS ISO 13486-1-1999 | 道路车辆.液压制动系统.双扩口管,螺纹孔,外螺纹接头和管座 | Road vehicles - Hydraulic braking systems - Double-flare pipes, tapped holes, male fittings and tube seats |
| BS ISO 13556-1999 | 道路车辆.排气系统泄漏位置的确定和设备规范 | Road vehicles - Localization of exhaust system leaks and equipment specifications |
| BS ISO 13562-1-2001 | 伸缩臂式工业车辆.稳定性试验 | Industrial variable-reach trucks - Stability tests |
| BS ISO 13562-2-2001 | 伸缩臂式工业车辆.6米及以上长度的货运集装箱叉车附加稳定性试验 | Industrial variable-reach trucks - Additional stability tests for trucks handling freight containers of length 6m and above |
| BS ISO 13563-1-2001 | 单侧负载叉车.稳定性试验 | Single side loading fork-lift trucks - Stability tests |
| BS ISO 13674-1-2003 | 道路车辆.沿中心驾驶的定量试验.摇摆试验 | Road vehicles - Test method for the quantification of on-centre handling - Weave test |
| BS ISO 13674-2-2007 | 道路车辆.沿中心驾驶的鉴定试验方法.摇摆试验 | Road vehicles - Test method for the quantification of on-centre handling - Transition test |
| BS ISO 13775-1-2000 | 汽车用热塑管和软管.非燃料应用 | Thermoplastic tubing and hoses for automotive use - Non-fuel applications |
| BS ISO 13775-2-2000 | 汽车用热塑管和软管.石油类燃料用 | Thermoplastic tubing and hoses for automotive use - Petroleum-based fuel applications |
| BS ISO 13985-2007 | 液态氢.地面车辆燃料箱 | Liquid hydrogen - Land vehicle fuel tanks |
| BS ISO 14229-2007 | 道路车辆.统一诊断设备(UDS).要求和规范 | Road vehicles - Unified diagnostic services (UDS) - Specification and requirements |
| BS ISO 14400-2005 | 道路车辆.轮子和轮辋.使用、一般维护和安全要求及失效条件 | Road vehicles - Wheels and rims - Use, general maintenance and safetyrequi rements and out-of-service conditions |
| BS ISO 14469-3-2006 | 道路车辆.压缩天然气(CNG)填充连接器.25 MPa (250 bar)连接器 | Road vehicles - Compressed natural gas (CNG) refuelling connector - 25 MPa (250 bar) connector |
| BS ISO 14508-2006 | 道路车辆.火花塞.终端 | Road vehicles - Spark plugs - Terminals |
| BS ISO 14512-2000 | 乘用车.具有裂口摩擦系数的正向前方地面制动系统.开环试验方法 | Passenger cars - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method |
| BS ISO 14513-2006 | 道路车辆.行人保护.头的撞击试验方法 | Road vehicles - Pedestrian protection - Head impact test method |
| BS ISO 14572-2006 | 道路车辆.圆形、非屏蔽60V和600V多芯铠装电缆.基本和高性能电缆试验方法和要求 | Road vehicles - Round, screened and unscreened, 60 V and 600 V multi-core sheathed cables - Test methods and requirements for basic and high-performance cables |
| BS ISO 14792-2003 | 道路车辆.重型商用车辆和公共汽车.稳态循环试验 | Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests |
| BS ISO 14793-2003 | 道路车辆.重型商用车辆和公共汽车.横向瞬态响应试验方法 | Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods |
| BS ISO 14794-2003 | 大型商用车辆和客车.转弯制动.开环试验方法 | Heavy commercial vehicles and buses - Braking in a turn - Open-loop test methods |
| BS ISO 15031-4-2005 | 道路车辆.与排放相关的诊断用车辆和外部设备之间通信.外部试验设备 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - External test equipment |
| BS ISO 15031-5-2006 | 道路车辆.与排放相关的诊断用车辆和外部设备之间通信.与排放相关的诊断服务 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Emissions-related diagnostic services |
| BS ISO 15031-6-2006 | 道路车辆.车辆和发射相关诊断用外部设备之间的通信.故障诊断编码定义 | Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Diagnostic trouble code definitions |
| BS ISO 15037-1-2006 | 道路车辆.车辆动力学试验方法.乘用车的一般条件 | Road vehicles - Vehicle dynamics test methods - General conditions for passenger cars |
| BS ISO 15037-2-2003 | 道路车辆.车辆动力学试验方法.重型车辆和公共汽车的一般条件 | Road vehicles - Vehicle dynamics test methods - General conditions for heavy vehicles and buses |
| BS ISO 15403-2000 | 天然气.作为车辆压缩燃料使用的天然气质量牌号 | Natural gas - Designation of the quality of natural gas for use as a compressed fuel for vehicles |
| BS ISO 15794-2001 | 双向和多向叉车卡车.稳定性试验 | Bi-directional and multi-directional fork-lift trucks - Stability tests |
| BS ISO 15828-2004 | 道路车辆.车前斜撞试验规程 | Road vehicles - Offset frontal impact test procedure |
| BS ISO 15829-2004 | 道路车辆.由杆冲击模拟进行有侧面气囊时乘客互相影响的评价的侧面冲击试验过程 | Road vehicles - Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation |
| BS ISO 15830-1-2006 | 道路车辆.World SID 50th percentile侧面碰撞(试验)男性假人的设计和性能规范.术语学和基本原理 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Terminology and rationale |
| BS ISO 15830-2-2006 | 道路车辆.World SID 50th percentile侧面碰撞(试验)男性假人的设计和性能规范.机械子系统 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Mechanical subsystems |
| BS ISO 15830-3-2006 | 道路车辆.World SID 50th percentile侧面碰撞(试验)男性假人的设计和性能规范.电子子系统 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Electronic subsystems |
| BS ISO 15830-4-2006 | 道路车辆.World SID 50th percentile侧面碰撞(试验)男性假人的设计和性能规范.用户手册 | Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - User's manual |
| BS ISO 15870-2001 | 工业用机动卡车.安全标志和危险图示.一般原则 | Powered industrial trucks - Safety signs and hazard pictorials - General principles |
| BS ISO 15871-2001 | 工业用货车.集装箱搬运和抓钩臂操操作指示灯规范 | Industrial trucks - Specification for indicator lights for container handling and grappler arm operations |
| BS ISO 16121-1-2006 | 道路车辆.专用线公共汽车驾驶员工作地点的人体工效学要求.一般描述和基本要求 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - General description, basic requirements |
| BS ISO 16121-2-2006 | 道路车辆.专用线公共汽车驾驶员工作地点的人体工效学要求.能见度 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Visbility |
| BS ISO 16121-3-2006 | 道路车辆.专用线公共汽车驾驶员工作场所的人体工效学要求.信息设备和控制器 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Information devices and controls |
| BS ISO 16121-4-2005 | 道路车辆.专用线公共汽车驾驶员工作地点的人类功效学要求.驾驶室要求 | Road vehicles - Ergonomic requirements for the driver's workplace in line-service buses - Cabin environment |
| BS ISO 16183-2003 | 重型机车.未处理排气的气体排放测量和瞬变试验条件下用部分流体稀释系统测量粒子排放 | Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions |
| BS ISO 16232-1-2007 | 道路车辆.液压管路部件清洁度.词汇 | Road vehicles - Cleanliness of components of fluid circuits - Vocabulary |
| BS ISO 16232-10-2007 | 道路车辆.液压管路部件清洁度.结果表达 | Road vehicles - Cleanliness of components of fluid circuits - Expression of results |
| BS ISO 16232-2-2007 | 道路车辆.液压管路部件清洁度.搅拌萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Method of extraction of contaminants by agitation |
| BS ISO 16232-3-2007 | 道路车辆.液压管路部件清洁度.压力漂洗萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Method of extraction of contaminants by pressure rinsing |
| BS ISO 16232-4-2007 | 道路车辆.液压管路部件清洁度.超声波技术萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Method of extraction of contaminants by ultrasonic techniques |
| BS ISO 16232-5-2007 | 道路车辆.液压管路部件清洁度.在功能试验台上萃取污染物的方法 | Road vehicles - Cleanliness of components of fluid circuits - Method of extraction of contaminants on functional test bench |
| BS ISO 16232-6-2007 | 道路车辆.液压管路部件清洁度.重量分析法测定颗粒质量 | Road vehicles - Cleanliness of components of fluid circuits - Particle mass determination by gravimetric analysis |
| BS ISO 16232-7-2007 | 道路车辆.液压管路部件清洁度.显微分析测量粒径和计数 | Road vehicles - Cleanliness of components of fluid circuits - Particle sizing and counting by microscopic analysis |
| BS ISO 16232-8-2007 | 道路车辆.液压管路部件清洁度.显微分析测定颗粒性质 | Road vehicles - Cleanliness of components of fluid circuits - Particle nature determination by microscopic analysis |
| BS ISO 16232-9-2007 | 道路车辆.液压管路部件清洁度.自动消光颗粒计数器测量粒径和计数 | Road vehicles - Cleanliness of components of fluid circuits - Particle sizing and counting by automatic light extinction particle counter |
| BS ISO 16234-2007 | 重型商用车辆和客车.具有裂口摩擦系数的正向前方地面制动系统.开环试验方法 | Heavy commercial vehicles and buses - Straight-ahead braking on surfaces with split coefficient of friction - Open-loop test method |
| BS ISO 16246-2005 | 道路车辆.M12 x 1.25带扁平座和14mm六角的火花塞及其气缸盖 | Road vehicles - M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing |
| BS ISO 16247-2006 | 道路车辆.排气系统泄漏的检测.氦试验方法和探测装置规范 | Road vehicles - Detection of exhaust systems leaks - Helium test method and detection device specification |
| BS ISO 16673-2007 | 道路车辆.运输信息和控制系统的人类工效学方面.阻塞法评定使用车内系统产生的视觉需求 | Road vehicles - Ergonomic aspects of transport information and control systems - Occlusion method to assess visual demand due to the use of in-vehicle systems |
| BS ISO 16750-1-2007 | 道路车辆.电气和电气设备环境条件和试验.总则 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - General |
| BS ISO 16750-2-2006 | 道路车辆.电气和电子设备的环境条件和试验.电负荷 | Road vehicles - Environmental conditions and testing for electrical & electronic equipment - Electrical loads |
| BS ISO 16750-3-2007 | 道路车辆.电气和电子设备的环境条件和测试.机械载荷 | Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Mechanical loads |
| BS ISO 16750-4-2006 | 道路车辆.电气和电子设备的环境条件和试验.气候负荷 | Road vehicles - Environmental conditions and testing for electrical & electronic equipment - Climatic loads |
| BS ISO 16833-2006 | 道路车辆.轮子.径向和侧边跳动的测量 | Road vehicles - Wheels - Measurement of radial and lateral run-out |
| BS ISO 16850-2007 | 道路车辆.行人保护.儿童头部撞击试验方法 | Road vehicles - Pedestrian protection - Child head impact test method |
| BS ISO 16992-2006 | 乘用车轮胎.备用装置代用设备(SUSE) | Passenger car tyres - Spare unit substitutive equipment (SUSE) |
| BS ISO 1726-2-2007 | 道路车辆.拖拉机和半挂车之间的机械连接.低耦合拖拉机和高容量半挂车之间的互换性 | Road vehicles - Mechanical couplings between tractors and semi-trailers - Interchangeability between low-coupling tractors and high-volume semi-trailers |
| BS ISO 17268-2007 | 压缩氢路面车辆加添油连接装置 | Compressed hydrogen surface vehicle refuelling connection devices |
| BS ISO 1728-2006 | 道路车辆.电动车和拖车之间的气动制动连接器 | Road vehicles - Pneumatic braking connections between motor vehicles and towed vehicles - Interchangeability |
| BS ISO 17288-1-2002 | 乘用车.无级驾驶.操纵断开回路试验方法 | Passenger cars - Free-steer behaviour - Steering-release open-loop test method |
| BS ISO 17288-2-2004 | 乘用车.无级变速性能.转向脉冲开环试验方法 | Passenger cars - Free-steer behaviour - Steering-pulse open-loop test method |
| BS ISO 17356-2-2005 | 道路车辆.嵌入式机动车装置用开放式界面.连接OS、COM和NM的OSEK/VDX规范 | Road vehicles - Open interface for embedded automotive applications - OSEK/VDX specifications for binding OS, COM and NM |
| BS ISO 17356-3-2006 | 道路车辆.嵌入式机动车装置用开放式界面.OSEK/VDX操作系统(OS) | Road vehicles - Open interface for embedded automotive applications - OSEK/VDX operating system (OS) |
| BS ISO 17356-4-2006 | 道路车辆.嵌入式机动车装置用开放式界面.OSEK/VDX通信(COM) | Road vehicles - Open interface for embedded automotive applications - OSEK/VDX Communication (COM) |
| BS ISO 17356-5-2006 | 道路车辆.嵌入式机动车装置用开放式界面.OSEK/VDX网络管理(NM) | Road vehicles - Open interface for embedded automotive applications - OSEK/VDX Network Management (NM) |
| BS ISO 17356-6-2006 | 道路车辆.嵌入式机动车装置用开放式界面.OSEK/VDX执行语言(OIL) | Road vehicles - Open interface for embedded automotive applications - OSEK/VDX implementation language (OIL) |
| BS ISO 17373-2006 | 道路车辆.在低速追尾情况下带座椅/头枕设计的车辆的乘客头部与颈部相互作用评估的滑板碰撞试验程序 | Road vehicles - Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact |
| BS ISO 17591-2006 | 林业机械.关节式吊杆原木装车机.识别术语、分类和元件命名 | Machinery for forestry - Knuckleboom log loaders - Identification, terminology, classification and component nomenclature |
| BS ISO 17900-2002 | 农用挂车.平衡半悬挂式挂车.有效载荷、垂直静载荷和轴向载荷的测定 | Agricultural trailers - Balanced and semi-mounted trailers - Determination of payload, vertical static load and axle load |
| BS ISO 18164-2005 | 乘用车、卡车、公共汽车和摩托车轮胎.滚动阻力测量方法 | Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance |
| BS ISO 18207-2006 | 道路车辆.3.5吨以下拖车在疲劳试验后联轴节球体用焊接牵引支撑架的控制 | Road vehicles - Trailers up to 3,5 t. Control of welded towing brackets for coupling ball after fatigue testing |
| BS ISO 19072-1-2007 | 道路车辆.点火装置、两通和三通连接接口.袋形接口定义 | Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Pocket interface definition |
| BS ISO 19072-2-2007 | 道路车辆.点火装置、两通和三通连接接口.试验方法和一般性能要求 | Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Test methods and general performance requirements |
| BS ISO 19078-2007 | 储气瓶.机动车辆用天然气道上燃料储气瓶装置检验和高压储气瓶的合格鉴定 | Gas cylinders - Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| BS ISO 1919-1998 | 道路车辆.平底座M14×1.25火花塞及其汽缸盖外壳 | Road vehicles - M14 x 1,25 spark plugs with flat seating and their cylinder head housings |
| BS ISO 19472-2006 | 林业机械.绞车.性能要求 | Machinery for forestry - Winches - Dimensions, performance and safety |
| BS ISO 19812-2007 | 道路车辆. M10 x 1型带16mm六角平座小型火花塞及其汽缸盖安装孔 | Road vehicles - M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| BS ISO 19813-2007 | 道路车辆.点火系统.塞顶线圈和笔形线圈上高压引出线罩用试验方法和要求 | Road vehicles - Ignition systems - Test methods and requirements for high voltage boots on plug-top coils and pencil coils |
| BS ISO 20176-2006 | 道路车辆.H点机械(HPM II).H点测定的规范和程序 | Road vehicles - H-Point machine (HPM II) - Specifications and Procedure for H-point determination |
| BS ISO 20566-2005 | 色漆和清漆.通过实验室洗车测定涂层系统的耐划痕性 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash |
| BS ISO 20653-2007 | 道路车辆.防护等级(IP代码).防护电气设备受外来物、水和通道的破坏 | Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access |
| BS ISO 20683-1-2006 | 飞行器地面设备.带前起落架的无牵引杆牵引车辆(TLTV)的设计、试验和维修.干线飞行器 | Aircraft ground equipment - Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear - Main-line aircraft |
| BS ISO 20683-2-2006 | 航空地面设备.带前起落架的无牵引杆的牵引车辆(TLTV)的设计、试验和维护.区域飞行器 | Aircraft ground equipment - Design, test and maintenance for towbarless towing vehicles (TLTV) interfaced with nose-landing gear - Regional aircraft |
| BS ISO 20826-2006 | 车载液化石油气装置部件.容器 | Automotive LPG components - Containers |
| BS ISO 20828-2006 | 道路车辆.安全认证管理 | Road vehicles - Security certificate management |
| BS ISO 21308-2-2006 | 道路车辆.底盘和车身制造商(BEP)之间的产品数据交换.车体尺寸交换参数 | Road vehicles - Product data exchange between chassis and bodywork manufacturers (BEP) - Dimensional bodywork exchange parameters |
| BS ISO 21750-2006 | 道路车辆.有关增进轮胎充气压力监控的安全 | Road vehicles - Safety enhancement in conjunction with tyre inflation pressure monitoring |
| BS ISO 21848-2005 | 道路车辆.电源电压42 V的电气和电子设备.电负载 | Road vehicles - Electrical and electronic equipment for a supply voltage of 42 V. Electrical loads |
| BS ISO 21994-2007 | 乘用车.ABS直线制动停车距离.开环试验方法 | Passenger cars - Stopping distance at straight-line braking with ABS - Open-loop test method |
| BS ISO 22168-2006 | 道路车辆.影响来自光源的光色的覆层保持试验.试验方法 | Road vehicles - Holding test of coatings influencing the colour of light emitted by light sources) - Test methods |
| BS ISO 22628-2002 | 道路车辆.可循环和可恢复性.计算方法 | Road vehicles - Recyclability and recoverability - Calculation method |
| BS ISO 22877-2004 | 脚轮和车轮.词汇、符号和多种语言术语 | Castors and wheels - Vocabulary, symbols and multilingual terminology |
| BS ISO 22896-2006 | 道路车辆.安全系统部署和客车装备传感器 | Road vehicles - Deployment and sensor bus for occupant safety systems |
| BS ISO 22902-1-2006 | 道路车辆.车用多媒体接口.通用技术综述 | Road vehicles - Automotive multimedia interface - General technical overview |
| BS ISO 22902-2-2006 | 道路车辆.车用多媒体接口.使用情况 | Road vehicles - Automotive multimedia interface - Use cases |
| BS ISO 22902-3-2006 | 道路车辆.车用多媒体接口.系统要求. | Road vehicles - Automotive multimedia interface - System requirements |
| BS ISO 22902-4-2006 | 道路车辆.车用多媒体接口.车辆接口信道的网络协议要求 | Road vehicles - Automotive multimedia interface - Network protocol requirements for vehicle interface access |
| BS ISO 22902-5-2006 | 道路车辆.车用多媒体接口.共用文集 | Road vehicles - Automotive multimedia interface - Common message set |
| BS ISO 22902-6-2006 | 道路车辆.车用多媒体接口.车辆接口设备 | Road vehicles - Automotive multimedia interface - Vehicle interface requirements |
| BS ISO 22902-7-2006 | 道路车辆.汽车多媒体接口.物理规范 | Road vehicles - Automotive multimedia interface - Physical specification |
| BS ISO 22977-2006 | 道路车辆.带14mm十二角平座及其气缸盖的M12x1,25火花塞 | Road vehicles - M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing |
| BS ISO 23273-1-2006 | 燃料电池道路车辆.安全规范.车辆功能安全 | Fuel cell road vehicles - Safety specifications - Vehicle functional safety |
| BS ISO 23273-2-2007 | 燃料电池道路车辆.安全规范.以压缩氢为车辆燃料的防止氢爆炸的保护 | Fuel cell road vehicles - Safety specifications - Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen |
| BS ISO 23273-3-2006 | 燃料电池道路车辆.安全规范.人员电击防护 | Fuel cell road vehicles - Safety specifications - Protection of persons against electric shock |
| BS ISO 23274-2007 | 混合动力道路车辆.废气排放和燃料消耗测量.非外表可充电车辆 | Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles |
| BS ISO 2328-2007 | 叉车.钩接式叉形臂和叉形臂托架.安装尺寸 | Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions |
| BS ISO 2330-2002 | 叉式起重车.叉形臂.技术特性和试验 | Fork-lift trucks - Fork arms - Technical characteristics and testing |
| BS ISO 2344-1999 | 道路车辆.M14×1.25锥座火花塞及其汽缸盖外壳 | Road vehicles - M14 x 1,25 spark plugs with conical seating and their cylinder head housings |
| BS ISO 2346-2002 | 道路车辆.带平底座的19mm六角形的M14×1.25小型火花塞及其汽缸盖外罩 | Road vehicles - M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing |
| BS ISO 23671-2006 | 乘用车轮胎.测量相对湿度下夹具性能的办法.负载下的新轮胎 | Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres |
| BS ISO 24134-2006 | 工业用卡车.卡车自动功能附加要求 | Industrial trucks - Additional requirements for automated functions on trucks |
| BS ISO 24347-2006 | 农业车辆.牵引车辆和被牵引车辆之间的机械连接器.测定球形连接装置(80mm) | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Dimensions of ball-type coupling device (80 mm) |
| BS ISO 2534-1998 | 道路车辆.发动机试车法规.总功率 | Road vehicles - Engine test code - Gross power |
| BS ISO 2575-2004 | 道路车辆.操纵件、指示器和信号装置的符号 | Road vehicles - Symbols for controls, indicators and tell-tales |
| BS ISO 2704-1998 | 道路车辆.平底座M10×1火花塞及其汽缸盖外壳 | Road vehicles - M10 x 1 spark plugs with flat seating and their cylinder head housings |
| BS ISO 2705-2007 | 道路车辆.M12×1.25平座火花塞和汽缸盖外壳 | Road vehicles - M12 x 1,25 spark plugs with flat seating and their cylinder head housings |
| BS ISO 2790-2005 | 带传动.汽车工业用V带及带轮.尺寸 | Belt drives - V-belts for the automotive industry and corresponding pulleys - Dimensions |
| BS ISO 2929-2003 | 油槽车放油用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification |
| BS ISO 3287-2000 | 机动工业货车.驾驶员控制符号及其它显示符号 | Powered industrial trucks - Symbols for operator controls and other displays |
| BS ISO 3463-2007 | 农业和林业用拖拉机.翻车防护结构(ROPS).动态试验方法和验收条件 | Tractors for agriculture and forestry - Roll-over protective structures (ROPS) - Dynamic test method and acceptance conditions |
| BS ISO 3553-2-1997 | 道路车辆.点火线圈和配电器的高压连接.第2部分:插头型 | Road vehicles - High tension connectors for ignition coils and distributors - Plug types |
| BS ISO 362-1998 | 声学.道路车辆加速的噪音排放测量.工程测量法 | Acoustics - Measurement of noise emitted by accelerating road vehicles - Engineering method |
| BS ISO 3808-2003 | 道路车辆.无屏蔽高电压点火电缆.总规范、试验方法和要求 | Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements |
| BS ISO 3842-2007 | 道路车辆.备用轮.互换性 | Road vehicles - Fifth wheels - Interchangeability |
| BS ISO 3888-1-1999 | 客车.急剧改变车道的操纵用试验车道.第1部分:两车道变换 | Passenger cars - Test track for a severe lane-change manoeuvre - Double-lane change |
| BS ISO 3888-2-2003 | 乘用车.车道急剧改变演习用试验车道.故障免除 | Passenger cars - Test track for a severe lane-change manoeuvre - Obstacle avoidance |
| BS ISO 3894-2005 | 道路车辆.商用车辆的车轮/轮辋.试验方法 | Road vehicles - Wheels/rims for commercial vehicles - Test methods |
| BS ISO 3911-2004 | 充气轮胎用车轮和轮辋.词汇、标识和标记 | Wheels and rims for pneumatic tyres - Vocabulary, designation and marking |
| BS ISO 3929-2003 | 道路车辆.在检验或维修过程中废气排放量的测量方法 | Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance |
| BS ISO 3984-2005 | 道路车辆.后部移动障碍壁冲击试验过程 | Road vehicles - Rear moving barrier impact test procedure |
| BS ISO 4000-1-2007 | 乘用车轮胎和轮辋.轮胎(米制系列) | Passenger car tyres and rims - Tyres (metric series) |
| BS ISO 4000-2-2007 | 乘用车轮胎和轮辋.轮辋 | Passenger car tyres and rims - Rims |
| BS ISO 4008-3-2003 | 道路车辆.喷油泵试验.应用和试验程序 | Road vehicles - Fuel injection pump testing - Application and test procedures |
| BS ISO 4020-2002 | 道路车辆.柴油发动机的燃油滤清器.试验方法 | Road vehicles - Fuel filters for diesel engines.Test methods |
| BS ISO 4138-2004 | 道路车辆.恒速环行驾驶.开环试验方法 | Passenger cars - Steady-state circular driving behaviour - Open-loop test methods |
| BS ISO 4141-1-2006 | 道路车辆.多芯连接电缆.基本性能铠装电缆的试验方法和要求 | Road vehicles - Multi-core connecting cables - Test methods and requirements for basic performance sheathed cables |
| BS ISO 4141-2-2006 | 道路车辆.多芯连接电缆.高性能铠装电缆试验方法和要求 | Road vehicles - Multi-core connecting cables - Test methods and requirements for high performance sheathed cables |
| BS ISO 4141-3-2006 | 道路车辆.多芯连接电缆.非屏蔽铠装低压电缆的结构、尺寸和标记 | Road vehicles - Multi-core connecting cables - Construction, dimensions and marking of unscreened sheathed low-voltage cables |
| BS ISO 4148-2004 | 道路车辆.专用警示信号灯.尺寸 | Road vehicles - Special warning lamps - Dimensions |
| BS ISO 4249-3-2005 | 摩托车轮胎和轮辋(代号规格系列).轮辋 | Motorcycle tyres and rims (code-designated series) - Rims |
| BS ISO 4925-2005 | 道路车辆.液压系统用非石油基制动液规范 | Road vehicles - Specification of non-petroleum-base brake fluids for hydraulic systems |
| BS ISO 4926-2007 | 道路车辆.液压制动系统.非石油基基准液 | Road vehicles - Hydraulic braking systems - Non-petroleum-base reference fluids |
| BS ISO 4927-2005 | 道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度120℃) | Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.) |
| BS ISO 4928-2006 | 道路车辆.使用非石油基液制动液的液压制动系统液压缸的弹性皮碗和密封圈(最高工作温度120℃) | Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.) |
| BS ISO 4930-2006 | 道路车辆.非石油基液压制动液的液压制动盘式液压缸用弹性密封垫(最高工作温度150℃) | Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 °C max.) |
| BS ISO 5057-1998 | 工业用卡车.叉式卡车叉杆运行的检验和维修 | Industrial trucks - Inspection and repair of fork arms in service on fork-lift trucks |
| BS ISO 5130-2007 | 声学.稳定道路车辆发射声压级的测量 | Acoustics - Measurements of sound pressure level emitted by stationary road vehicles |
| BS ISO 5287-2003 | 皮带传动.汽车工业用窄V带.疲劳试验 | Belt drives - Narrow V-belts for the automotive industry - Fatigue test |
| BS ISO 5692-1-2004 | 农用车辆.拖挂车辆的机械连接装置.挂接环的尺寸 | Agricultural vehicles - Mechanical connections on towed vehicles - Dimensions for hitch-rings |
| BS ISO 5751-1-2004 | 摩托车轮胎和轮辋(米制系列).设计指南 | Motorcycle tyres and rims (metric series) - Design guides |
| BS ISO 5751-2-2004 | 摩托车轮胎和轮辋(米制系列).轮胎尺寸和载荷能力 | Motorcycle tyres and rims (metric series) - Tyre dimensions and load-carrying capacities |
| BS ISO 5751-3-2004 | 摩托车轮胎和轮辋(米制系列).配套轮辋轮廓范围 | Motorcycle tyres and rims (metric series) - Range of approved rim contours |
| BS ISO 6055-2004 | 工业用货车.护顶架.规范和试验 | Industrial trucks - Overhead guards - Specification and testing |
| BS ISO 611-2003 | 道路车辆.机动车辆及其拖车的制动.词汇 | Road vehicles - Braking of automotive vehicles and their trailers - Vocabulary |
| BS ISO 6117-2005 | 道路车辆.使用非石油基液压制动液的鼓式液压制动轮缸的弹性保护罩(最高工作温度100℃) | Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100?C max.) |
| BS ISO 6118-2006 | 道路车辆.使用非石油基制动液的液压制动促动缸的弹性皮碗和密封圈(最高工作温度70℃) | Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.) |
| BS ISO 6155-1998 | 机床.卧式主轴六角自动车床和卧式单轴自动车床的试验条件.精度试验 | Machine tools - Test conditions for horizontal spindle turret and single spindle automatic lathes - Testing of the accuracy |
| BS ISO 6292-1997 | 机动工业用卡车和牵引车.制动性能和部件强度 | Powered industrial trucks and tractors - Brake performance and component strength |
| BS ISO 6452-2007 | 橡胶或塑料涂层织物.汽车内装饰材料雾气凝结特征的测定 | Rubber- or plastics-coated fabrics - Determination of fogging characteristics of trim materials in the interior of automobiles |
| BS ISO 6460-1-2007 | 摩托车.废气排放和燃料消耗的测量方法.一般试验要求 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - General test requirements |
| BS ISO 6460-2-2007 | 摩托车.废气排放和燃料消耗测量方法.试验车和特殊试验条件 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Test cycles and specific test conditions |
| BS ISO 6460-3-2007 | 摩托车.废气排放和燃料消耗测量方法.恒速下的燃料消耗测量 | Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Fuel consumption measurement at a constant speed |
| BS ISO 6489-1-2002 | 农用车辆.牵引车和拖车间的机械连接.挂勾尺寸 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Dimensions of hitch-hooks |
| BS ISO 6489-2-2002 | 农用车辆.被牵引和牵引车辆间的机械连接装置.第2部分:40号 U型钩接头的规范 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Specifications for clevis coupling 40 |
| BS ISO 6489-3-2004 | 农用车辆.被牵引和牵引车之间的机械连接装置.拖拉机牵引杆 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Tractor drawbar |
| BS ISO 6489-4-2007 | 农用车辆.被牵引与牵引车之间的机械连接装置.测定楔式耦合尺寸 | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Dimensions of piton-type coupling |
| BS ISO 6518-1-2002 | 道路车辆.点火系统.词汇 | Road vehicles - Ignition systems - Vocabulary |
| BS ISO 6550-3-2002 | 道路车辆.带锥形座和汽缸盖罩的铠装加热塞.第3部分:M10加热塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M10 glow-plugs |
| BS ISO 6550-4-2005 | 道路车辆.带锥座封闭型电热塞及其汽缸盖安装孔尺寸.M8 x 1电热塞 | Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M8 x 1 glow-plugs |
| BS ISO 6722-2006 | 道路车辆.60V和600V单芯电缆.尺寸、试验方法和要求 | Road vehicles - 60 V and 600 V single-core cables - Dimensions, test methods and requirements |
| BS ISO 6813-1998 | 道路车辆.碰撞分类.术语 | Road vehicles - Collision classification - Terminology |
| BS ISO 6856-2005 | 道路车辆.非屏蔽高压点火电缆组件.试验方法和一般要求 | Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements |
| BS ISO 6969-2004 | 道路车辆.声音信号设备.车辆安装后的试验 | Road vehicles - Sound signalling devices - Tests after mounting on vehicle |
| BS ISO 7132-2003 | 土方机械.自动倾卸车.术语和商业规范 | Earth-moving machinery - Dumpers - Terminology and commercial specifications |
| BS ISO 7141-2005 | 道路车辆.轻合金轮.碰撞试验 | Road vehicles - Light alloy wheels - Impact test |
| BS ISO 7176-21-2003 | 轮椅.电动轮椅和小型摩托车电磁兼容性的要求和试验方法 | Wheelchairs - Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters |
| BS ISO 7176-4-1998 | 轮椅.理论测距用电动轮椅和踏板车的能耗 | Wheelchairs - Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range |
| BS ISO 7401-2003 | 道路车辆.横向瞬态响应的试验方法.开路试验法 | Road vehicles - Lateral transient response test methods - Open-loop test methods |
| BS ISO 7588-1-1998 | 道路车辆.电气/电子开关设备.继电器和闪光器 | Road vehicles - Electrical/electronic switching devices - Relays and flashers |
| BS ISO 7588-2-1999 | 道路车辆.电气/电子开关设备.第2部分:电子设备 | Road vehicles - Electrical/electronic switching devices - Electronic devices |
| BS ISO 7588-3-1999 | 道路车辆.电气/电子开关设备.微继电器 | Road vehicles - Electrical/electronic switching devices - Microrelays |
| BS ISO 7634-2007 | 道路车辆.压缩空气制动系统.试验程序 | Road vehicles - Compressed air braking systems for towed vehicles including those with electronic braking control functions .Test procedures |
| BS ISO 7635-2006 | 道路车辆.包括电控功能的机动车辆用气压或气动/液压制动系统.试验规程 | Road vehicles - Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions - Test procedures |
| BS ISO 7637-3-2007 | 道路车辆.传导和耦合引起的电干扰.通过电容耦合和电感耦合经由非电源线线路的瞬间电传输 | Road vehicles - Electrical disturbances from conduction and coupling - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| BS ISO 7654-1998 | 道路车辆.柴油发动机用离心式燃油过滤器.安装和连接尺寸 | Road vehicles - Spin-on fuel filters for diesel engines - Mounting and connecting dimensions |
| BS ISO 7859-2000 | 机动脚踏两用车.燃料消耗量的测量 | Mopeds - Fuel consumption measurements |
| BS ISO 7862-2004 | 道路车辆.通过模拟前面碰撞评价约束系统的滑板碰撞试验规程 | Road vehicles - Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions |
| BS ISO 8066-2-2001 | 汽车空调器用橡胶和塑料软管及软管配件.规范.冷却剂134a | Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Refrigerant 134a |
| BS ISO 8178-11-2006 | 往复式内燃机.废气排放测量.瞬态试验条件下非道路车辆排气和颗粒排放量现场测量 | Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions |
| BS ISO 8349-2002 | 道路车辆.测量道路表面摩擦力 | Road vehicles - Measurement of road surface friction |
| BS ISO 8379-1998 | 越野卡车.稳定性试验 | Industrial trucks - Rough terrain trucks - Stability tests |
| BS ISO 8470-2007 | 道路车辆.六角对边16mm的M14×1.25平座火花塞及其气缸盖安装孔 | Road vehicles M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings |
| BS ISO 8705-2006 | 机动脚踏两用车.重心位置的测量方法 | Mopeds - Measurement methods for location of centre of gravity |
| BS ISO 8789-1995 | 机动车辆运送石油液化气用橡胶软管和软管组件.规范 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification |
| BS ISO 8820-2-2005 | 道路车辆.熔断器.用户指南 | Road vehicles - Fuse-links - User's guide |
| BS ISO 8820-5-2007 | 道路车辆.熔断体.SF 30和SF 51类型的带轴向引线的熔断体(带状熔断体)和试验装置 | Road vehicles - Fuse-links - Fuse-links with axial terminals (strip fuse-links) types SF 30 and SF 51 and test fixtures |
| BS ISO 8820-6-2007 | 道路车辆.熔断体.单螺栓熔断体 | Road vehicles - Fuse-links - Single-bolt fuse-links |
| BS ISO 8820-7-2007 | 道路车辆.熔断体.:额定电压为450V带焊片(G型)的熔断体 | Road vehicles - Fuse-links - Fuse-links with tabs (Type G) with rated voltage of 450 V |
| BS ISO 8936-2007 | 休闲旅居车辆用遮篷.要求和试验方法 | Awnings for leisure accommodation vehicles - Requirements and test methods |
| BS ISO 9128-2006 | 道路车辆.制动液类型图形符号 | Road vehicles - Graphical symbols to designate brake fluid types |
| BS ISO 9130-2005 | 摩托车.重心位置的测量方法 | Motorcycles - Measurement method for location of centre of gravity |
| BS ISO 9633-2001 | 自行车链条.特性和试验方法 | Cycle chains - Characteristics and test methods |
| BS ISO 9815-2003 | 道路车辆.乘用车和挂车列车.横向稳定性试验 | Road vehicles - Passenger-car and trailer combinations - Lateral stability test |
| BS ISO 9816-2007 | 乘用车.车辆转弯时的停车反作用力.开环试验方法 | Passenger cars - Power-off reaction of a vehicle in a turn - Open-loop test method |
| BS ISO 9981-1999 | 带传动.汽车工业用带轮和V型楔带.PK轮廓:尺寸 | Belt drives - Pulleys and V-ribbed belts for the automotive industry - PK profile:dimensions |
| BS ISO2790-2005 | 皮带传动.汽车工业及相应皮带轮用V形皮带.尺寸 | Belt drives - V-belts for the automotive industry and corresponding pulleys - Dimensions |
| BS M 73-1994 | 航空.自动推进式厕所服务车.功能要求 | Aircraft - Self-propelled lavatory-servicing vehicle - Functional requirements |
| BS M 77-1994 | 自动推进式除冰/防冰车辆.功能要求 | Self-propelled de-icing/anti-icing vehicles - Functional requirements |
| BS M 87-1996 | 航空地面支持设备.大容量飞机用供膳车.功能要求 | Aircraft ground support equipment - Catering vehicle for large capacity aircraft - Functional requirements |
| BS MA 47-1977 | 船舶用吊货滑车实施规程 | Code of practice for ships' cargo blocks |
| BS PAS 125-2006 | 汽车保养.车身修理.规范 | Automotive services - Vehicle body repair - Specification |
| BS PAS 43-2006 | 车辆拆卸、回收和移动操作的安全工作.管理系统规范 | Safe working of vehicle breakdown, recovery and removal operations - Management system specification |
| BS PAS 68-2007 | 机动车防撞围栏的规范 | Specification for vehicle security barriers |
| BS PAS 69-2006 | 机动车防撞围栏安装和规范指南 | Guidelines for the specification and installation of vehicle security barriers |
| BS PAS 80-2005 | 汽车修理车间服务.车辆保养和维修.技术服务和客户服务.规范 | Automotive garage services - Service and repair of vehicles - Technical and customer service - Specification |
| BS PAS 90-2006 | 工业货车现场保养和维修安全操作实施规范 | Specification for safe working practice for on-site maintenance and repair of industrial trucks |
| DD 203-1-1991 | 工业自动化.车间地板生产.第1部分:标准化基准模型和标记要求方法 | Industrial automation: shop floor production. Reference model for standardization and a methodology for identification of requirements |
| DD 203-2-1991 | 工业自动化:车间生产.标准化和方法学基准模型的应用 | Industrial automation: shop floor production. Application of the reference model for standardization and methodology |
| DD 235-1996 | 车载式信息系统导则 | Guide to in-vehicle information systems |
| DD ENV 12694-1997 | 公共运输.道路车辆.可变电子外部信号标志的尺寸要求 | Public transport. Road vehicles. Dimensional requirements for variable electronic external signs |
| DD ENV 13093-1998 | 公共运输.道路车辆.驾驶员仪表盘机械界面要求.最低显示及键盘参数 | Public transport. Road vehicles. Driver's console mechanical interface requirements. Minimum display and keypad parameters |
| DD ENV 13149-1-2000 | 公共运输.道路车辆调度安排和控制系统.车上数据传输的 WORLDFIP 定义和应用规则 | Public transport. Road vehicle scheduling and control systems. WORLDFIP definition and application rules for onboard data transmission |
| DD ENV 13149-2-2000 | 公共运输.道路车辆调度安排和控制系统.WORLDFIP敷设电缆规范 | Public transport. Road vehicle scheduling and control systems. WORLDFIP cabling specifications |
| DD ENV 13563-2000 | 交通控制设备.车辆探测器 | Traffic control equipment. Vehicle detectors |
| DD ENV ISO 14815-2000 | 道路运输和交通远程信息处理技术.自动车辆和设备识别.系统规范 | Road transport and traffic telematics. Automatic vehicle and equipment identification. System specification |
| DD ENV ISO 14816-2000 | 道路运输和交通远程信息处理技术.自动车辆和设备识别.编号和数据结构 | Road transport and traffic telematics. Automatic vehicle and equipment identification. Numbering and data structures |
| PD 6634-2-1999 | 车辆约束系统.高速公路约束系统基础原理 | Vehicle restraint systems. Fundamentals of highway restraint systems |
| PD 6634-5-1999 | 车辆约束系统.路障转换和终端设置 | Vehicle restraint systems. Development of barrier transitions and terminals |
| PD 6634-6-1999 | 车辆约束系统.路沿防撞设施.撞击衰减装置 | Vehicle restraint systems. Crashworthy roadside features. Impact attenuators |
| PD IEC TR 60721-4-5-2002 | 环境条件分类.IEC 60721-3的环境条件等级与IEC 60068的环境试验的相互关系和换算导则.地面车辆装置 | Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Ground vehicle installations |
| QGN/95008-1995 | 汽车工业质量管理体系应用BS EN ISO 9002标准的指南注释 | Guidance notes on the application of BS EN ISO 9002 for quality management systems in the automotive industry |
| QSP/6510/92001-1995 | 旧车销售质量管理体系应用BS EN ISO 9002标准规范 | Specification for the application of BS EN ISO 9002 to quality management systems relating to the sale of used vehicles |
| TH 42043-2000 | 机动车及设备.EC、ECE和国家批准方案应用的国际指南 | Motor Vehicles and Equipment - An international guide to the application of EC, ECE and national approval schemes |
| 编号 | 中文名称 | 英文名称 |