编号 |
中文名称 |
英文名称 |
NF A50-110-12-2003
|
铝和铝合金.废料.第12部分:一种合金组成的车床切屑
|
(Aluminium and aluminium alloys - Scrap - Part 12 : turnings consisting of one single alloy.)
|
NF A82-041-1987
|
电阻焊接.汽车工业中多点焊接用的带分离式二次线组的变压器.特殊规范
|
(Resistance welding. Transformers with two separate secondary windings for multispot welding as used in automobile industry. Particular specifications.)
|
NF A82-113-1996
|
电阻焊设备.汽车工业中多点点焊用带两个单独副线圈的变压器的特殊规范
|
(RESISTANCE WELDING EQUIPMENT. PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH TWO SEPARATE SECONDARY WINDINGS FOR MULTI-SPOT WELDING, AS USED IN THE AUTOMOBILE INDUSTRY. (EUROPEAN STANDARD EN ISO 7284).)
|
NF C20-003-5-1997
|
环境条件分类.第3部分:环境参数及其严酷度组的分类.第5节:地面车辆装置
|
(Classification of environmental conditions. Part 3 : classification of groups of environmental parameters and their severities. Section 5 : ground vehicle installations.)
|
NF C46-904-6-2001
|
使用配电线运载系统的配电车.第6部分:A-XDR编码规则
|
(Distribution automation using distribution line carrier systems - Partie 6 : A-XDR encoding rule.)
|
NF C47-740-1995
|
家用和类似用途的自动电控制设备.第2部分:汽车启动继电器的特殊要求
|
(Automatic electrical controls for household and similar use. Part 2 : particular requirements for motor starting relays.)
|
NF C58-982-2-2003
|
电动道路车辆驱动用二次电池.第2部分:动态放电性能试验和动态耐久试验
|
(Secondary batteries for the propulsion of electric road vehicles - Part 2 : dynamic discharge performance test and dynamic endurance test.)
|
NF C58-982-3-2002
|
电动道路车辆推进用蓄电池.第3部分:性能和寿命试验(城市车辆的交通相容性)
|
(Secondary batteries for the propulsion of electric road vehicles - Part 3 : performance and life testing (traffic compatible, urban use vehicles).)
|
NF C63-975-2-1-2002
|
电动车辆充电系统.第 21部分: 对交/直流电源导电连接的电动车辆的要求
|
(Electric vehicle conductive charging system - Part 21 : electric vehicle requirements for conductive connection to an a.c./d.c supply.)
|
NF C63-975-2-2-2002
|
电动车辆充电系统.第 22部分: 交流电动车辆充电站
|
(Electric vehicle conductive charging system - Part 22 : AC electric vehicle charging station.)
|
NF C72-101-3-2003
|
白炽灯.安全规范.第3部分:卤钨灯(非车用)
|
(Incandescent lamps - Safety specifications - Part 3 : tungsten-halogen lamps (non-vehicle).)
|
NF C72-105-2003
|
卤钨灯(非车辆用).性能规范
|
(Tungsten halogen lamps (non-vehicle) - Performance specifications.)
|
NF C73-895-2002
|
家用和类似用途电器的安全.第2-95部分:住宅用垂直移动汽车门驱动装置的特殊要求
|
(Safety of household and similar electrical appliances - Part 2-95 : particular requirements for drives for vertically moving garage doors for residential use.)
|
NF C91-012-2002
|
车辆,船舶,内燃机驱动装置.无线电干扰特性.不包括那些安装在车辆/小船/自身有驱动的装置中的或类似车辆/小
|
()
|
NF C91-025-2003
|
车载、船载和设备上的接收机保护用无线电干扰特性.极限值和测量方法
|
(Radio disturbance characteristics for the protection of receivers used on board vehicles, boats and on devices - Limits and methods of measurement.)
|
NF D35-357-2000
|
专用液化石油气设施规范.车辆和小艇中安装的房间用密封式液化石油气空间加热设备
|
(Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats.)
|
NF D35-358-2003
|
旅游居住车和其他道路车辆的液化石油天然气装置用规范
|
(Specification for the installation of LPG-systems for habitation purposes in leisure accommodation vehicles and other road vehicles.)
|
NF E03-501-1970
|
ISO微型车螺纹.牙形件
|
(ISO miniature screw threads.profile.)
|
NF E03-502-1970
|
ISO微型车螺纹.总图
|
(ISO miniature screw threads.general plan.)
|
NF E03-503-1970
|
ISO微型车螺纹.公差.总图
|
(ISO miniature screw threads.tolerances.general plan.)
|
NF E03-504-1970
|
ISO微型车螺纹.公差.极限尺寸表
|
(ISO miniature screw threads.tolerances.tables for limits of sizes.)
|
NF E26-115-1993
|
摩托车圆链.特性和试验方法
|
(MOTOR CYCLE CHAINS. CHARACTERISTICS AND TEST METHODS.)
|
NF E29-733-2001
|
气瓶.用作机动车燃料的天然气的车上存储用高压气瓶
|
(Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles.)
|
NF E29-735-2004
|
移动式气瓶.蓄电池动力车.设计、生产、标识和检验
|
(Transportable gas cylinders - Battery-vehicles - Design, manufacture, identification and testing.)
|
NF E29-780-2002
|
可运输储气瓶.永久气体和液化气(乙炔除外)用蓄电池驱动车辆.灌装时的检验
|
(Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling.)
|
NF E52-043-1981
|
起重和装卸.手动链式滑车.术语和一般特性
|
(Lifting and handling. Hand-operated chain hoists. Terminology and general characteristics.)
|
NF E52-057-1981
|
起重和装卸.手摇滚筒式绞车.术语和一般特征
|
(Lifting and handling. Hand-operated drum winches.)
|
NF E52-060-1981
|
起重和装卸.电动滑车.术语和一般特性
|
(Lifting and handling. Electrically-operated hoists.)
|
NF E52-093-1974
|
起重和装卸.手动链式滑车.一般设计规则.试验
|
(LIFTING AND HANDLING. MANUALLY OPERATED CHAIN PULLEY BLOCKS GENERAL RULES FOR CONSTRUCTION. TESTS.)
|
NF E52-094-1975
|
起重和装卸.手动链式滑车.使用规则(手拉葫芦除外)
|
(LIFTING AND HANDLING. MANUALLY OPERATED CHAIN PULLEY BLACKS. GENERAL RULES FOR USE. (EXCLUDING BLOCKS WITH OPERATING HANDLE).)
|
NF E52-096-1975
|
起重和装卸.手摇滚筒式绞车.使用规则
|
(LIFTING AND HANDLING. MANUALLY OPERATED DRUM HOISTS. GENERAL RULES FOR USE.)
|
NF E52-115-2-2000
|
提升设备.分类.第2部分:汽车起重机
|
(Lifting appliances - Classification - Part 2 : mobile cranes.)
|
NF E52-300-1978
|
轻便机车上安装的安全装置.特征和检验
|
(DEAD MAN`S DEVICES FOR LOCOTRACTOR. SPECIFICATIONS AND CHECKINGS.)
|
NF E56-005-1-2003
|
地下采矿机械.地下作业用移动机械.安全.第1部分:橡胶轮胎车辆
|
(Machines for underground mines - Mobile machines working underground - Safety - Part 1 : rubber tyred vehicles.)
|
NF E56-005-2-2003
|
地下采矿机械.地下作业用移动机械.安全.第1部分:轨道机车
|
(Machines for underground mines - Mobile machines working underground - Safety - Part 2 : rail locomotives.)
|
NF E58-007-1993
|
土方机械.翻斗车.术语和工业规范
|
(Earth-moving machinery. Dumpers. Terminology and commercial specifications.)
|
NF E58-053-2000
|
土方机械.翻车保护结构.实验室试验和性能要求
|
(Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements.)
|
NF E58-110-1999
|
道路建筑车辆.沥青混合成套设备.安全要求.(EN 536)
|
(ROAD CONSTRUCTION MACHINES. ASPHALT MIXING PLANTS. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 536).)
|
NF E58-120-1996
|
土方机械.安全.第6部分:自动倾卸车的要求
|
(EARTH-MOVING MACHINERY. SAFETY. PART 6 : REQUIREMENTS FOR DUMPERS. (EUROPEAN STANDARD EN 474-6).)
|
NF E58-155-1995
|
土方机械.翻斗车身支架和操作舱翻转支架装置
|
(EARTH-MOVING MACHINERY. DUMPER BODY SUPPORT AND OPERATOR`S CAB TILT SUPPORT DEVICES.)
|
NF E60-022-1971
|
车床丝杠的螺矩(数控车床除外)
|
(PITCHES OF SCREW LEAD OF LATHES (OTHER THAT NUMERICAL CONTROLLED LATHES).)
|
NF E60-101-1997
|
通用平行车床的合格条件.精度测试
|
(Acceptance conditions for general purpose parallel lathes. Testing of the accuracy.)
|
NF E60-102-1976
|
数控卧式车床的试验条件.精确度检验
|
(TEST CONDITIONS FOR NUMERICAL CONTROL PARALLEL LATHES. TESTING OF THE ACCURACY.)
|
NF E60-103-1998
|
机床.卧式轴六角自动车床和卧式单轴自动车床的试验条件.精度试验
|
(Machine tools. Test conditions for horizontal spindle turret and single spindle automatic lathes. Testing of the accuracy.)
|
NF E60-105-1984
|
单柱或双柱立式车床.验收条件和名称.第1部分:概述
|
(Acceptance conditions for vertical turning and boring lathes with one or two columns. Part 1 : general introduction.)
|
NF E60-106-1984
|
单柱或双柱立式车床.验收条件和名称.第2部分:固定或可移动卡盘车床.精确度检验
|
(Acceptance conditions and nomenclature for vertical turning and boring lathes with one or two columns. Part 2 : lathes with a single fixed or movable table. Testing of accuracy.)
|
NF E60-107-1985
|
机床.仿形车床和仿形辅助装置.验收条件.精确度检验
|
(Machine-tools. Copying lathes and copying attachments. Acceptance conditions. Testing of accuracy.)
|
NF E60-150-1965
|
机车.车间计量学原理
|
(MACHINE TOOLS. PRINCIPLES OF WORKSHOP METROLOGY.)
|
NF E60-273-1991
|
机床.测量噪音的常规工作条件.车床
|
(Machine tools. Conventional working conditions for measurement of noise. Turning machines.)
|
NF E60-415-1989
|
机床.车床和顶心.保护装置强度的试验
|
(MACHINES TOOLS. LATHES AND TURNING CENTRES. STRENGTH TESTS FOR GUARDS.)
|
NF E60-416/A1-2003
|
机床的安全.小型数字控制的转向车床和转向中心
|
(Safety of machine tools - Small numerically controlled turning machines and turning centres.)
|
NF E60-417-2001
|
机床的安全.大型数字控制的转向车床和转向中心
|
(Safety of machine tools - Large numerically controlled turning machines and turning centres.)
|
NF E60-418-2001
|
机床的安全.带和不带自动控制的手控车床
|
(Safety of machine-tools - Manually controlled turning machines with or without automatic control.)
|
NF E60-425-2002
|
机床.安全性.多轴自动车床
|
(Machine tools - Safety - Multi-spindle automatic turning machines.)
|
NF E62-105-1997
|
机床.车床顶尖.互换尺寸
|
(Machine tools. Lathe centres. Sizes for interchangeability.)
|
NF E62-110-1997
|
车床切削工具.轴头和面板.可互换性尺寸.第2部分:凸轮锁型
|
(Machine-tools. Spindle noses and face plates . Sizes for interchangeability. Part 2 : camlock type.)
|
NF E62-111-1976
|
车床主轴头部和卡盘.卡口型
|
(LATHE SPINDLE NOSES AND BACK PLATES. TYPE BAYONET.)
|
NF E64-061-1983
|
木材加工机械.普通车床.验收条件和术语.精确度检验
|
(Woodworking machines. Acceptance conditions and nomenclature for turning lathes. Precision testing.)
|
NF E66-303-2000
|
车刀和刨刀柄.选择形状和尺寸
|
(Shanks for turning and planning tools - Shapes and dimensions of the section.)
|
NF E66-305-1969
|
车刀的金属碳化物刀片
|
(CARBIDE TIPS FOR TURNING TOOLS.)
|
NF E66-311-1995
|
可转位刀片的车刀和仿形刀刀柄和刀片座.名称与牌号
|
(Turning and copying tool holders and cartridges for indexable inserts. Designation.)
|
NF E66-322-1984
|
车床工具.带硬金属钎焊刀片的自动车刀
|
(Turning tools. Tools with hardmetal inserts for turning on automatic machines.)
|
NF E66-344-1999
|
带可转位刀片的车刀和仿形刀用单刃刀具夹头.尺寸
|
(Single-point tool holders for turning and copying, for indexable inserts. Dimensions.)
|
NF E66-363-1966
|
高速钢合金车床刀具.偏刀
|
(TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET SIDE TURNING TOOLS.)
|
NF E66-364-1966
|
高速钢合金车床刀具.倒角车刀
|
(TURNING TOOLS WITH SPEED STEEL INSERTS. OFFSET TURNING TOOLS FOR CORNER WORK.)
|
NF E66-365-1966
|
高速钢合金车床刀具.外圆车刀
|
(STRAIGTH TURNING TOOLS WITH HIGH SPEED TIPS.)
|
NF E66-366-1966
|
高速钢合金车床刀具.宽脸方头车刀
|
(TURNING TOOLS WITH SPEED STEEL INSERTS. WIDE FACE SQUARE NOSE TURNING TOOLS.)
|
NF E66-367-1966
|
高速钢合金车床刀具.切槽刀
|
(TURNING TOOLS WITH SPEED STEEL INSERTS. PARTING OFF TURNING TOOLS.)
|
NF E66-368-1966
|
高速钢合金车床刀具.切断车刀
|
(TURNING TOOLS WITH SPEED STEEL INSERTS. CUTTING OFF TOOLS.)
|
NF E66-369-1966
|
高速钢合金车床刀具.车外螺纹刀具
|
(TURNING TOOLS WITH SPEED STEEL INSERTS. EXTERNAL THREADING TOOLS.)
|
NF E66-370-1966
|
高速钢合金车床刀具.镗刀
|
(TURNING TOOLS WITH SPEED STEEL INSERTS. BORING TOOLS.)
|
NF E66-371-1966
|
高速钢合金车床刀具.镗孔端面刀具
|
(TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL SIDE TURNING TOOLS.)
|
NF E66-372-1966
|
高速钢合金车床刀具.扩孔镗刀
|
(TURNING TOOLS WITH SPEED STEEL INSERTS. RIGHT ANGLE PARTING OFF TURNING TOOLS.)
|
NF E66-373-1966
|
高速钢合金车床刀具.车内螺纹刀具
|
(TURNING TOOLS WITH SPEED STEEL INSERTS. INTERNAL THREADING TOOLS.)
|
NF E66-510-1975
|
车床刀尖的圆弧半径
|
(Corner radius of single point cutting tools.)
|
NF E66-551-1968
|
车床用刀架
|
(LATHE TOOL POSTS.)
|
NF E86-012-1992
|
含空气或氮气的不用火加热的简单压力容器.第2部分:用于汽车及其挂车制动和辅助系统的压力容器
|
(Simple unfired pressure vessels designed to contain air or nitrogen. Part 2 : pressure vessels for air braking and auxiliary systems for motor-vehicles and their trailers.)
|
NF E86-500-2-2000
|
冷冻车辆.最大容量不超过1000升的便携隔绝车辆.第2部分:设计,生产,检验和试验
|
(Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2 : design, fabrication, inspection and testing.)
|
NF E86-502-1-2002
|
低温车辆.大型可运输真空绝缘车辆.第1部分:基本要求
|
(Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1 : fundamental requirements.)
|
NF E86-502-3-2002
|
冷冻车辆.大型可运输真空绝缘车辆.第3部分:运行要求
|
(Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3 : operational requirements.)
|
NF E86-511-2001
|
低温车辆.低温柔性软管
|
(Cryogenic vessels - Cryogenic flexible hoses.)
|
NF E86-514-2000
|
冷冻车辆.冷冻服务用泵
|
(Cryogenic vessels - Pumps for cryogenic service.)
|
NF E90-411-2002
|
机械振动.工业货车.驾驶员座椅振动的实验室评价和规范
|
(Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration.)
|
NF E90-451-1-1994
|
机械振动.车辆座位振动评价的实验室方法.第1部分:基本要求
|
(Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Part 1 : basic requirements.)
|
NF F00-072-1990
|
铁路车辆.密实橡胶制挤压件
|
(GENERAL RAILWAY EQUIPMENT. COMPACT-RUBBER EXTRUDED PARTS.)
|
NF F00-103-1987
|
铁路车辆.概论.有关铁路经济的量、单位和符号.定义和起草规则
|
(ROLLING STOCK. GENERALITIES. QUANTITIES,UNITS AND SYMBOLS RELATING TO THE RAILWAY ECONOMICS. DEFINITIONS AND DRAFTING RULES.)
|
NF F00-125-1-1999
|
铁路设施.设备的环境条件.平板车辆上的设备
|
(Railway applications - Environmental conditions for equipment - Part 1 : equipment on board rolling stock.)
|
NF F00-701-1993
|
铁路设备梗概.车辆每个车轮静态负荷的测量.称重设备和控制
|
(RAILWAY EQUIPMENT IN GENERAL. MEASUREMENT OF THE STATIC LOADS PER EACH WHEEL OF THE VEHICLES. WEIGHING INSTALLATIONS AND CONTROL.)
|
NF F00-702-1998
|
铁路设施.机车和轨道间的动态相互作用.力测量法
|
(RAILWAY APPLICATIONS. DYNAMIC INTERACTION BETWEEN VEHICLES AND TRACKS. FORCE MEASUREMENT METHOD.)
|
NF F01-002-1972
|
铁路车辆.绞链
|
(RAILWAY TRANSPORT EQUIPMENT. HINGE PLATES.)
|
NF F01-003-1974
|
铁路车辆.涂漆或类似铭牌用的字体
|
(RAILWAY TRANSPORT EQUIPMENT. LETTERS FOR PAINTED OR SIMILAR INSCRIPTIONS.)
|
NF F01-014-1974
|
铁路车辆.A型和C型车轴
|
(RAILWAY TRANSPORT EQUIPMENT. TYPE A AND C MACHINING CENTRES FOR AXLES.)
|
NF F01-015/AM1-1977
|
火车运输设备.带有开槽螺纹末端的非钻孔轴.开槽螺纹末端
|
(RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH GROOVED SCREW-ENDS. GROOVED SCREW-ENDS.)
|
NF F01-018-1971
|
铁路运输设备.带螺纹端头和有槽端头的未钻孔轴.车轮抱闸装置
|
(RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH THREADED AND SLOTTED ENDS. WHEEL LOCKING DEVICES.)
|
NF F01-026-1986
|
铁路车辆.车轴.轮,轮箍和轮副的标记.标记定义
|
(Rolling stock. Marking of the axles, wheels, tyres and wheels sets. Definition of the marks.)
|
NF F01-027-1981
|
铁路运输设备.车轴标记.用mm表示尺寸
|
(Railway transport equipment. Marking of the axles. Dimensions in millimetres.)
|
NF F01-028-1987
|
铁路车辆.车轮标记
|
(Rolling stock. Marking of wheels and tyres.)
|
NF F01-030-1976
|
铁路车辆.中型绞链
|
(RAILWAY TRANSPORT EQUIPMENT. MEDIUM SIZED HINGES.)
|
NF F01-031-1976
|
铁路车辆.大型铰链
|
(RAILWAY TRANSPORT EQUIPMENT. HEAVY-DUTY HINGES.)
|
NF F01-032-1976
|
铁路车辆.中型和大型铰链. 轴
|
(RAILWAY TRANSPORT EQUIPMENT. MEDIUM AND HEAVY-DUTY HINGES. PINS.)
|
NF F01-033-1975
|
铁路车辆.槽钢弹簧片定中心用的定位销
|
(RAILWAY TRANSPORT EQUIPMENT. STEADY PINS FOR CENTERING LAMINATED SPRINGS IN GROOVED PLATES.)
|
NF F01-034-1970
|
铁路车辆.属于一个铁路管理机构的集装箱和各种车辆(机车除外)的识别牌
|
(RAILWAY TRANSPORT EQUIPMENT. IDENTIFICATION PLATE FOR CONTAINERS AND ALL VEHICLES (OTHER THAN LOCOMOTIVES) BELONGING TO A RAILWAY ADMINISTRATION.)
|
NF F01-035-1970
|
铁路车辆.特种车辆的许可证和识别牌
|
(RAILWAY TRANSPORT EQUIPMENT. AUTHORIZATION AND IDENTIFICATION PLATE FORPRIVATELY-OWNED VEHICLES.)
|
NF F01-039-1972
|
铁路车辆.联接钮
|
(RAILWAY TRANSPORT EQUIPMENT. HOOKING PINS.)
|
NF F01-041-1972
|
铁路车辆.手柄. 外形尺寸. 安装
|
(RAILWAY TRANSPORT EQUIPMENT. HANDLES - GAUGES - FIXINGS.)
|
NF F01-042-1981
|
铁路车辆.铁路车辆和类似车辆运行中的定位标
|
(Railway trnasport equipment. Positioning of railway carriages and similar vehicles.)
|
NF F01-044-1986
|
铁路器材.列车定位
|
(ROLLING STOCK. ORIENTATION OF THE LIFT OF CARRIAGES.)
|
NF F01-046-1970
|
铁路车辆.冷弯或热弯钢板弹簧.组弹簧片.公差
|
(RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. MOUNTED SPRINGS. TOLERANCES.)
|
NF F01-047-1974
|
铁路车辆.热弯或冷弯钢板弹簧.板簧片
|
(RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. SPRING LEAVES.)
|
NF F01-048-1970
|
铁路车辆.热弯或冷弯钢板弹簧, 弹簧箍. 公差. 工作尺寸
|
(RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. FLANGES. TOLERANCES. FUNCTIONAL DIMENSIONS.)
|
NF F01-049-1974
|
铁路车辆.热弯或冷弯钢板弹簧. UIC型键. 销. 边
|
(RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS : U.I.C. TYPE WEDGES. KEYS. CHOCKS.)
|
NF F01-054-1972
|
铁路车辆.BERNE板手控制的活动方块装装置. 极限尺寸
|
(RAILWAY TRANSPORT EQUIPMENT. BERNE KEY OPERATED SOCKETS. DIMENSION LIMITS.)
|
NF F01-055-1988
|
铁路车辆.紧线器. 信号灯和牵引杆
|
(ROLLING STOCK. TURNBUCKLES AND DRAW BARS FOR TIGHTENERS.)
|
NF F01-079-1979
|
铁路车辆.轮箍用四脚扣环
|
(RAILWAY TRANSPORT EQUIPMENT. RECTANGULAR TYRE CLIP.)
|
NF F01-080-1979
|
铁路车辆.绞孔轮箍. 公差(用四角环扣安装)
|
(RAILWAY TRANSPORT EQUIPMENT. BORED TYRES. TOLERANCES. (FITTED WITH RECTANGULAR TYRE CLIP).)
|
NF F01-082-1968
|
铁路车辆.管路. 软管接头(非金属)
|
(RAILWAY TRANSPORT EQUIPMENT. PIPEWORK. FIXING OF NON-METALLIC FLEXIBLE PIPES.)
|
NF F01-082M-1970
|
铁路车辆.管路.软管接头(非金属)
|
()
|
NF F01-084-1982
|
铁路车辆.管路. 双锥形连接环
|
(Railway transport equipment. Pipework. Biconical rings.)
|
NF F01-101-1991
|
铁路车辆.铁路车辆.按法国NF 01-501标准的设计样板制作的铁路车辆举升装置
|
(RAILWAY ROLLING STOCK. LIFTING OF RAILWAY VEHICLES FITTING THE CONSTRUCTION GAUGE SPECIFED IN FRENCH STANDARD NF F 01-501.)
|
NF F01-104-1971
|
铁路车辆.箱用轴承. 验收检验
|
(Railway transport equipment. Rolling bearings for railway axle-boxes. Acceptance inspection.)
|
NF F01-115-1994
|
铁路车辆.标准轨道车辆的轮对. 特点
|
(Railway rolling stock. Wheel profils for standard gauge rolling stock. Characteristics.)
|
NF F01-116-2001
|
铁路车辆.车轮组件和转向架.非动力轴.设计方法
|
(Railway applications - Wheelsets and bogies - Non-powered axles - Design method.)
|
NF F01-117-2001
|
铁路车辆.车轮组件和转向架.动力轴.设计方法
|
(Railway applications - Wheelsets and bogies - Powered axles - Design method.)
|
NF F01-120-1982
|
铁路车辆.车轴. 术语. 定义. 制图规则
|
(Railway transport equipment. Plain axles. Terminology. Definitions. Rules for the preparation of technical drawings.)
|
NF F01-121-1989
|
轴承箱用车轴. 公差. 表面状态
|
(ROLLING STOCK. AXLES FOR ROLLER-BEARING AXLE-BOXES. TOLERANCES. SURFACE CONDITIONS. SPECIAL DIMENSIONAL INDICATIONS.)
|
NF F01-123-1991
|
铁路车辆.车轴.实心轴.质量规定
|
(Railway rolling stock. Full axles. Quality requirements.)
|
NF F01-124-1991
|
铁路车辆.空心车轴.质量要求.公差.表面的状况.特殊尺寸表示
|
(Railway rolling stock drilled axles. Quality requirements. Tolerances. Surface conditions. Special dimensional indications.)
|
NF F01-125-1984
|
铁路车辆.轮对. 术语. 定义. 制图规则
|
(ROLLING STOCK. WHEELSETS. TERMINOLOGY. DEFINITIONS. RULES APPLICABLE TO DRAWING ARRANGEMENTS.)
|
NF F01-130-1984
|
铁路车辆.车轮. 术语. 定义. 制图规则
|
(Rolling stock. Wheels. Terminology. Definitions. Rules applicable to drawing arrangements.)
|
NF F01-131-1987
|
铁路车辆. 车轮. 公差. 表面状态. 特殊定尺寸元件
|
(ROLLING STOCK. WHEELS. TOLERANCES. SURFACE CONDITIONS. SPECIAL DIMENSIONAL INDICATIONS.)
|
NF F01-133-1992
|
铁路车辆.整体车轮.质量要求
|
(Railway rolling stock. Solid wheels. Quality requirements.)
|
NF F01-134-1990
|
铁路车辆.极高速列车用整体轮.规范
|
(RAILWAY ROLLING STOCK. SOLID WHEELS FOR VERY HIGH SPEED TRAINS. SPECIFICATIONS.)
|
NF F01-141-1987
|
铁路车辆. 轴承部件. 验磁器检验
|
(Rolling stock. Running gear. Magnetoscopic examination.)
|
NF F01-142-1990
|
铁路车辆.行走机构.超声检验
|
(Railway rolling stock. Running gear. Ultrasonic examination.)
|
NF F01-152-1988
|
铁路车辆.梯子和天桥及平台用的防湿盖板
|
(ROLLING STOCK. GRATING FOR STEPS,GANGWAYS AND VESTIBULES.)
|
NF F01-200-1974
|
铁路车辆.铰接.综合
|
(RAILWAY TRANSPORT EQUIPMENT. JOINTS. GENERAL REMARKS.)
|
NF F01-201-1974
|
铁路车辆.绞接.综合
|
(RAILWAY TRANSPORT EQUIPMENT. HIGH-QUALITY JOINTS WITH CLEVIS AND TENON WITH ROTATING PIN. CONSTITUENT PARTS.)
|
NF F01-202-1974
|
铁路车辆.转动轴的精加工轴颈与外壳的联接. 构件
|
(RAILWAY TRANSPORT EQUIPMENT. ROUGH-QUALITY JOINTS WITH CLEVIS AND TENON AND ROTATING PIN. CONSTITUENT PARTS.)
|
NF F01-204-1974
|
铁路车辆.轴颈和外壳的粗加工联接.构件
|
(RAILWAY TRANSPORT EQUIPMENT. ROUGH-QUALITY JOINTS WITH CLEVIS AND TENON WITH FIXED PIN. CONSTITUENT PARTS.)
|
NF F01-205-1974
|
铁路车辆.精加工轴颈和外壳的联接.构件
|
(RAILWAY TRANSPORT EQUIPMENT. ROUGH-QUALITY LOOSE-FITTING JOINTS WITH CLEVIS AND TENON. CONSTITUENT PARTS.)
|
NF F01-206-1974
|
铁路车辆.耳轴联接.构件
|
(RAILWAY TRANSPORT EQUIPMENT. PIN JOINTS. CONSTITUENT PARTS.)
|
NF F01-211-1974
|
铁路车辆.轴颈和外壳的联接.轴颈和外壳
|
(RAILWAY TRANSPORT EQUIPMENT. CLEVIS AND TENON JOINTS. CLEVISES AND TENONS.)
|
NF F01-212-1974
|
铁路车辆.耳轴联接.耳轴和杆
|
(RAILWAY TRANSPORT EQUIPMENT. PIN JOINTS. PINS AND LEVERS.)
|
NF F01-215-1999
|
铁路设施.完成制造后而使用前的铁道车辆的测试
|
(Railway applications - Testing of rolling stock after completion of construction and before entry into service.)
|
NF F01-231-1984
|
铁路车辆.带耳轴的轴颈和外壳的联接.AS,AG型钢制内环和外环
|
(Rolling stock. Articulations with clevis and tenon and with gudgeon. Inner steel rings type as, ag.)
|
NF F01-232-1974
|
铁路车辆.轴颈和外壳的联接.BS型铜制内环
|
(RAILWAY TRANSPORT EQUIPMENT. CLEVIS AND TENON JOINTS. INNER BRASS RINGS TYPE BS.)
|
NF F01-233-1984
|
铁路车辆.耳轴联接.EAC,IG钢制内钢环
|
(Rolling stock. Articulations with gudgeon. Inner and outer steel rings types AEG, lAG.)
|
NF F01-252-1989
|
铁路车辆.内部设备成分的确定
|
(RAILWAY ROLLING STOCK. MOUNTING OF INTERIOR FITTINGS. DESIGN ARRANGEMENTS.)
|
NF F01-281-1989
|
铁路车辆.纤维加强热固塑料材料
|
(RAILWAY ROLLING STOCK. FIBRE REINFORCED THERMOSETING PLASTICS.)
|
NF F01-301-1988
|
铁路车辆.机车和挂车负载的重量和状况
|
(ROLLING STOCK. MASSES AND LOAD STATES OF POWERED VEHICLES AND COACHES.)
|
NF F01-302-1982
|
铁路车辆. 车辆术语. 工作和试验车辆
|
(ROLLING STOCK. SPECIFIC TERMS FOR ROLLING STOCK. WORKING AND TEST VEHICLES.)
|
NF F01-303-1983
|
铁路车辆. 提升作业用摄取点的定位图形符号
|
(ROLLING STOCK. GRAPHIC SYMBOLIZATION OF JACKING POINTS FOR LIFTING AND RERAILING OPERATIONS.)
|
NF F01-305-1989
|
铁路车辆.使用和维护的概念和可靠性
|
(RAILWAY ROLLING STOCK. RELIABILITY,AND FIRST STEPS IN MAINTAINABILITY AND AVAIBILITY.)
|
NF F01-310-1990
|
铁路车辆.订货时,厂家及其供货者之间提供技术的规定
|
(RAILWAY ROLLING STOCK. DELIMITATION OF TECHNICAL ALLOWANCES BETWEEN THE CONSTRUCTORS AND THEIR SUPPLIERS FOR THE EXECUTION OF AN ORDER.)
|
NF F01-322-2001
|
铁路设施.铁路车辆用电气设备.透空式结构的电力电阻器规则
|
(Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction.)
|
NF F01-373-2000
|
铁路设施.铁路车辆.冲击和振动试验
|
(Railway applications - Rolling stock equipment - Shock and vibration tests.)
|
NF F01-411-1995
|
铁路车辆.铁路车辆或相关耐久滑行引导车用的液压阻尼器
|
(RAILWAY ROLLING STOCK. HYDRAULIC DAMPERS FOR RAILWAY OR RELATED PERMANENT GUIDING VEHICLES.)
|
NF F01-492-1-1993
|
铁路车辆.玻璃门窗(窗户及其它).第1部分.
|
(RAILWAY ROLLING STOCK. GLASS BAYS (WINDOWS AND OTHER). PART 1.)
|
NF F01-492-2-1993
|
铁路车辆.玻璃门窗.第2部分:几何公差
|
(RAILWAY ROLLING STOCK. GLASS BAYS. PART 2 : GEOMETRICAL MARGES.)
|
NF F01-502-1988
|
铁路车辆.坡度过渡车辆的行驶
|
(ROLLING STOCK. RUNNING OVER TRANSITION FROM ONE GRADIENT TO ANOTHER.)
|
NF F01-510-1990
|
铁路车辆.车上的食品保持和加工的环境条件
|
(RAILWAY ROLLING STOCK. ENVIRONNEMENT CONDITIONS SUSTAINED OR PRODUCED BY DEVICES OR ORGANS IN VEHICLES.)
|
NF F01-701-1979
|
米制铁轨车辆用125和130mm轮箍的安装
|
(RAILWAY TRANSPORT EQUIPMENT. FITTING 125 AND 130 MM TYRES FOR METRE GAUGE ROLLING STOCK.)
|
NF F01-802-1988
|
铁路车辆.分类和试验的定义
|
(ROLLING STOCK. CLASSIFICATION AND DEFINITION OF TESTS.)
|
NF F01-810-1990
|
铁路车辆.非合金钢或低合金钢电弧焊和电阻焊接头.设计与施工规则
|
(RAILWAY ROLLING STOCK. ARC AND RESISTANCE WELDED JOINTS OF UNALLOYED OR LOW ALLOYED STEELS. RULES FOR CONCEPTION AND REALIZATION.)
|
NF F01-812-1-1990
|
铁路车辆.钢的电弧和电阻焊接接头.第1部分:对接焊和角接接头中缺陷验收准则
|
(RAILWAY ROLLING STOCK. ART AND RESISTANCE WELDED JOINTS OF STEELS. PART 1 : ACCEPTANCE CRITERIA FOR DEFECTS IN WELDED BUTT AND CORNER JOINTS.)
|
NF F01-815-1993
|
铁路车辆.橡胶基弹性部件
|
(RAILWAY ROLLING STOCK. RUBBER-BASED ELASTIC PARTS.)
|
NF F01-820-1992
|
铁路车辆.车身用铝合金焊接接头(焊缝)
|
(RAILWAY ROLLING STOCK. WELDED JOINTS OF PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK. CHARACTERIZATION.)
|
NF F02-049-1969
|
铁路车辆.锁紧连接的液压紧固和放松. 喷油导管
|
(RAILWAY TRANSPORT EQUIPMENT. OIL INJECTION DUCTS FOR HYDRAULIC SCOTCHING AND UNSCOTCHING OF TIGHTENED ASSEMBLIES.)
|
NF F02-049M1-1977
|
铁路车辆.锁紧连接的液压紧固和松释喷油导管
|
()
|
NF F02-303-1990
|
铁路车辆.齿轮及传动齿轮
|
(RAILWAY ROLLING STOCK. GEARS PINIONS AND WHEELS.)
|
NF F02-403-1978
|
铁路运输设备.标准轨距车辆用140MM轮箍的安装
|
(RAILWAY TRANSPORT EQUIPMENT. FITTING 140 MM TYRES FOR STANDARD GAUGE ROLLING STOCK.)
|
NF F03-004-1983
|
铁路车辆.金属螺钉. 沉头和半沉头. A级. 符号F和FB
|
(Railway rolling stock. Grade A. Countersunk and raised countersunk notched head machine screws. Symbols F and FB.)
|
NF F03-005-1983
|
铁路车辆.金属螺钉. 圆柱头和球面圆柱头. A级. 符号C和CR
|
(Railway rolling stock. Grade A. Notched cheese head or notched dome head machine screws. Symbols C and CR.)
|
NF F03-006-1983
|
铁路车辆.开槽懦半沉头螺钉一螺母. A级. 符号FBP
|
(Railway rolling stock. Grade A. Slotted or notched raised countersunk head screws nuts. Symbol FBP.)
|
NF F03-007-1983
|
铁路车辆.半球形螺母和球形圆柱螺母, A级, 符号R和CR
|
(Railway rolling stock. Grade A. Round head and domed head nuts. Symbols R and CR.)
|
NF F03-016-1983
|
铁路车辆.开槽沉头螺钉, 螺母. A级. FP
|
(Railway rolling stock. Grade A. Slotted countersunk head screws nuts. Symbol FP.)
|
NF F03-301-1988
|
铁路车辆.货车拖车和类似车辆的负载和状态
|
(ROLLING STOCK. WEIGHTS AND STATES OF LOAD OF WAGONS AND ASSIMILATED VEHICLES FREIGHT.)
|
NF F07-021-1992
|
铁路固定设备和车辆.电磁干扰.辐射场的测量
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTROMAGNETIC DISTURBANCES. MEASURMENT OF RADIANT FIELD.)
|
NF F07-022-1992
|
铁路固定设备和车辆.电磁干扰.纵向感应的电动势测量
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTROMAGNETIC DISTURBANCES. MEASUREMENT OF LONGITUDINAL INDUCED ELECTROMOTIVE FORCE.)
|
NF F07-024-1992
|
铁路固定设备和车辆.电磁干拢.铁路信号和电信电缆50H2频率的屏蔽系数的确定和测量
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTROMAGNETIC DISTURBANCES. DETERMINATION AND MEASUREMENT OF SCREENING FACTOR WITH A FREQUENCY OF 50 HZ OF RAILWAY SIGNALLING AND TELECOMMUNICATION CABLES.)
|
NF F07-121-3-1-2001
|
铁路应用.电磁兼容性.第3-1部分:滚动运货.火车和完整车辆
|
(Railway applications - Electromagnetic compatibility - Part 3-1 : rolling stock - Train and complete vehicle.)
|
NF F07-238-2003
|
铁路设施.机车车辆和列车探测系统间的兼容性
|
(Railway applications - Compatibility between rolling stock and train detection systems.)
|
NF F10-101-1998
|
铁路滚动存货车.滚动货车缓冲.一般规则
|
(RAILWAY ROLLING STOCK. BUFFERS FOR FREIGHT ROLLING STOCK. GENERAL RULES.)
|
NF F10-102-1998
|
铁路车辆.货物运输车缓冲.车壳和元件部分
|
(RAILWAY ROLLING STOCK. BUFFERS FOR FREIGHT ROLLING STOCK. ENVELOPES AND COMPONENT PARTS.)
|
NF F10-103-1998
|
铁路滚动存货车.滚动货车缓冲.105MM冲程弹性系统
|
(RAILWAY ROLLING STOCK. BUFFERS FOR FREIGHT ROLLING STOCK. ELASTIC SYSTEM OF 105 MM STROKE.)
|
NF F10-104-1998
|
铁路滚动存货车.滚动货车缓冲.130MM和150MM冲程弹性系统
|
(RAILWAY ROLLING STOCK. BUFFERS FOR FREIGHT ROLLING STOCK. ELASTIC SYSTEM OF 130 MM AND 150 MM STROKE.)
|
NF F10-105-1998
|
铁路滚动存货车.滚动货车缓冲.缓冲和组成部分的试验和试验方法
|
(RAILWAY ROLLING STOCK. BUFFERS FOR FREIGHT ROLLING STOCK. TESTS AND TESTS METHODS FOR BUFFERS AND THEIR COMPONENT PARTS.)
|
NF F10-402-1984
|
铁路车辆. 1MN牵引钩
|
(Railway transport equipment. Coupling hooks of 1 mn.)
|
NF F10-404-1984
|
铁路车辆.0.25MN的联接螺钉
|
(Railway transport equipment. Coupling screw of 0,25 mn.)
|
NF F10-405-1988
|
铁路车辆.0. 25MN牵引钩
|
(Rolling stock. 0,25 mn coupling hook.)
|
NF F10-407-1983
|
铁路车输. 0. 85MN联接螺杆
|
(Railway transport equipment. Coupling screw of 0,85 mn.)
|
NF F10-408-1988
|
铁路车辆. 0. 60MN牵引钩
|
(Rolling stock. 0,60 mn coupling hook.)
|
NF F10-409-1988
|
铁路车辆.50吨拉紧螺杆
|
(ROLLING STOCK. 0,50 MN COUPLING SCREW.)
|
NF F10-410-1988
|
铁路车辆.1.5MN的牵引钩
|
(ROLLING STOCK. 1,5 MN COUPLING HOOK.)
|
NF F10-411-1988
|
铁路车辆.1.35MN的连接螺杆
|
(ROLLING STOCK. 1,35 MN COUPLING SCREW.)
|
NF F10-420-1991
|
铁路车辆.牵引车辆和拖车用车钩、牵引装置及驱动齿轮装置
|
(Railway rolling stock. Coupling, traction and driving gears for tractive and hauled stock.)
|
NF F11-001-1988
|
铁路车辆.手制动. 手轮. 外形尺寸和互换尺寸. 安装
|
(ROLLING STOCK. HAND BRAKE WHEELS.)
|
NF F11-002-1970
|
铁路车辆.手制动. 手柄. 外形尺寸和互换尺寸. 安装
|
(RAILWAY TRANSPORT EQUIPMENT. HAND BRAKE. HANDLES. OVERALL AND INTERCHANGEABILITY DIMENSIONS. MOUNTING.)
|
NF F11-003-1970
|
铁路车辆.手制动. 螺钉和螺母. 螺距和螺纹剖面. 螺钉传动
|
(RAILWAY TRANSPORT EQUIPMENT. HAND BRAKE. SCREWS AND NUTS. PITCHES AND PROFILES. SCREW DRIVES.)
|
NF F11-005-1969
|
铁路车辆.压缩空气制动装置. 维修车间鉴定牌
|
(RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE EQUIPMENT. MAINTENANCE WORK-SHOP IDENTIFICATION BADGES.)
|
NF F11-010-1998
|
铁路车辆.液压动力系统.图解符号
|
(RAILWAY ROLLING STOCK. FLUID POWER SYSTEMS. GRAPHIC SYMBOLS.)
|
NF F11-013-1984
|
铁路车辆.压缩空气制动. 25mm自动制动装置连接头
|
(Railway rolling stock. Compressed-air brake. Coupling head for 25 mm automatic brake pipe.)
|
NF F11-014-1970
|
铁路车辆.压缩空气制动装置. 直通式自动制动连接头
|
(RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE. DIRECT BRAKE COUPLING HEAD.)
|
NF F11-015-1984
|
铁路车辆. 空气导管. 25mm主要导管的连接头
|
(Railway rolling stock. Air pipes. Coupling head for 25 mm main brake pipe.)
|
NF F11-016-1981
|
铁路车辆.压缩空气制动装置和空气导管.25mm联轴节的连接
|
(RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE AND AIR PIPES. 25 MM BRAKE-HOSE CONNECTING NIPPLE.)
|
NF F11-017-1981
|
铁路车辆.压缩空气制动装置和空气导管. 25mm摩擦离合器
|
(RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE AND AIR PIPES. 25 MM HALF-COUPLINGS.)
|
NF F11-018-1981
|
铁路车辆.压缩空气制动装置和空气导管. 直径为25mm的管用软管
|
(RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE AND AIR PIPES. FLEXIBLE HOSES FOR 25 MM PIPES.)
|
NF F11-025-1984
|
铁路车辆.带O形密封圈的仪器管路的连接
|
(RAILWAY TRACTION AND ROLLING STOCK. PIPEWORK CONNECTIONS ON DEVICES FITTED WITH O-RING SEAL PLUGS. INTERFACES.)
|
NF F11-027-1990
|
铁路车辆.综合气动管路控制板
|
(RAILWAY ROLLING STOCK. PANELS WITH INTEGRATED PNEUMATIC CIRCUITS.)
|
NF F11-040-1994
|
装空气或氮气用的不近火的一般压力容器.第3部分:用于铁路运输车辆空气制动和辅助气动设备的钢制压力容器
|
(Simple unfired pressure vessels designed to contain air or nitrogen. Part 3 : steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock.)
|
NF F11-042-1994
|
装空气或氮气用的一般不近火的压力容器.第4部分:用于铁路运输车辆空气制动和辐助气动设备的铝合金压力容器
|
(Simple unfired pressure vessels designed to contain air or nirogen. Part 4 : aluminium alloy pressure vessels designed for air braking equipment and auxiliary penumatic equipment for railway rolling stock.)
|
NF F11-044-1991
|
铁路车辆.刹车装置及气动装置用复合材料制压缩空气罐
|
(RAILWAY ROLLING STOCK. COMPRESSED AIR TANK IN COMPOSITE MATERIAL DESIGNED FOR BRAKING EQUIPMENT AND PNEUMATIC EQUIPMENT.)
|
NF F11-050-1985
|
铁路车辆. 带O形密封圈的塞子
|
(RAILWAY TRACTION AND ROLLING STOCK-PLUGS WITH O-RING SEAL.)
|
NF F11-051-1990
|
铁路车辆.O形密封圈圈的选择,标志.尺寸和公差
|
(RAILWAY ROLLING STOCK. SELECTION OF O RINGS. DESIGNATION,DIMENSIONS AND TOLERANCES.)
|
NF F11-069-1988
|
铁路车辆.气动部件检验设备的用接头
|
(ROLLING STOCK. CONNECTIONS FOR PNEUMATIC-GEAR CONTROL EQUIPMENT.)
|
NF F11-070-1989
|
铁路车辆.轨道车和类似车辆压缩空气管路用快速连接和快速耦合
|
(RAILWAY ROLLING STOCK. QUICK HOSE ASSEMBLIES AND QUICK-ACTION COUPLINGS FOR THE COMPRESSED-AIR CIRCUITS OF RAIL AND RAIL-ASSIMILABLE VEHICLES.)
|
NF F11-100-1995
|
铁路车辆.气动装置和电路用压缩空气的质量
|
(Railway rolling stock. Quality of compressed air for pneumatic apparatuses and circuits use.)
|
NF F11-101-1994
|
铁路车辆.有凸缘的气动要装置的接头和密封接触面
|
(Railway rolling stock. Connecting and airtight interfaces for flanged pneumatic apparatuses.)
|
NF F11-102-1996
|
铁路车辆.气动和电气动器具防止外部冲击的保护程度
|
(RAILWAY ROLLING STOCK. DEGREES OF PROTECTION AGAINST EXTERNAL ATTACKS TO PNEUMATIC AND ELECTROPNEUMATIC APPARATUSES.)
|
NF F11-281-1993
|
铁路车辆.脚阐金属型芯的鉴定程序
|
(RAILWAY ROLLING STOCK. APPROVAL PROCEDURE FOR BRAKE-SHOES INSERTS.)
|
NF F11-285-1994
|
铁路车辆.闸板的鉴定程序
|
(RAILWAY ROLLING STOCK. APPROVAL PROCEDURE FOR BRAKE DISKS.)
|
NF F11-286-1993
|
铁路车辆.盘式制动器生产线的控制程序
|
(RAILWAY ROLLING STOCK. APPROVAL PROCEDURE FOR DISK BRAKE LININGS.)
|
NF F11-291-1991
|
铁路车辆.用复合材料制的制动板
|
(RAILWAY ROLLING STOCK. BRAKE SHOE INSERTS MADE OF COMPOSITE MATERIALS.)
|
NF F11-292-1991
|
铁路车辆.用焙烧材料制的刹车闸瓦托
|
(RAILWAY ROLLING STOCK. BRAKE SHOE INSERTS MADE OF SINTERED MATERIALS.)
|
NF F11-296-1991
|
铁路车辆.用复合材料制的圆制动垫
|
(RAILWAY ROLLING STOCK. DISK BRAKE LININGS MADE OF COMPOSITE MATERIALS.)
|
NF F11-297-1992
|
铁路车辆.金属粉末烧结材料制盘式制动衬片
|
(RAILWAY ROLLING STOCK. DISK BRAKE LININGS MADE OF SINTERED MATERIALS.)
|
NF F11-380-1994
|
铁路车辆.压缩空气橡胶软管
|
(RAILWAY ROLLING STOCK. COMPRESSED-AIR RUBBER HOSES.)
|
NF F11-400-1983
|
铁路车辆. 可折卸支架的制动块,概述
|
(RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. GENERAL.)
|
NF F11-401-1985
|
铁路车辆. 可折卸支架的制动块. 销铁支架低摩擦用闸瓦托
|
(RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. BRAKE-SHOES INSERT HOLDERS FOR INSERTS MADE OF CAST-IRON AND WITH A LOW COEFFICIENT OF FRICTION.)
|
NF F11-402-1983
|
铁路车辆. 可拆卸支架的制动块.磷铸件250和320制动块
|
(RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. 250 MM AND 320 MM INSERTS,MADE OF PHOSPHOROUS CAST IRON.)
|
NF F11-403-1983
|
铁路车辆. 可拆卸支架的制动块.用非铸件的其它低摩擦系数材料制的250和300制动块
|
(RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. 250 MM AND 320 MM INSERTS,MADE OF MATERIALS WITH A LOW COEFFICIENT OF FRICTION OTHER THAN CAST IRON.)
|
NF F11-404-1985
|
铁路车辆. 可拆卸支架的制动块, 高摩擦系数支架用闸瓦托
|
(RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. BRAKE-SHOES INSERT HOLDERS FOR INSERTS WITH A HIGH COEFFICIENT OF FRICTION.)
|
NF F11-405-1983
|
铁路车辆. 可拆卸支架加制动块. 高摩擦系数材料制250和300制动块
|
(RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. 250 MM AND 320 MM INSERTS,MADE OF MATERIALS WITH A HIGH COEFFICIENT OF FRICTION.)
|
NF F11-410-1985
|
铁路车辆. 盘式制动器.概述
|
(RAILWAY ROLLING STOCK. DISK BRAKES. GENERAL.)
|
NF F11-411-1985
|
铁路车辆. 盘式制动器. 直径为590. 610和640盘式制动垫片
|
(RAILWAY ROLLING STOCK. DISK BRAKES. BRAKE LINING HOLDER,FOR DISKS OF DIAMETER 590,610 AND 640 MM.)
|
NF F11-412-1985
|
铁路车辆. 盘式制动器. 直径为590. 610和640盘用有机物质制动垫片
|
(RAILWAY ROLLING STOCK. DISK BRAKES. BRAKE LININGS,MADE OF ORGANIC MATERIALS,FOR DISKS OF DIAMETER 590,610 AND 640 MM.)
|
NF F11-414-1994
|
铁路车辆.盘式制动器.可交换性.尺寸
|
(RAILWAY ROLLING STOCK. DISKS BRAKE. INTERCHANGEABILITY. DIMENSIONS.)
|
NF F11-415-1990
|
铁路车辆.带铸铁制齿冠的制动盘
|
(RAILWAY ROLLING STOCK. BRAKE DISCS WITH CAST IRON RING.)
|
NF F11-416-1994
|
铁路车辆.带钢环的制动圆板
|
(RAILWAY ROLLING STOCK. BRAKE DISCS WITH STEEL RING.)
|
NF F11-600-1994
|
铁路车辆.气动设备和电气动设备的气密性试验
|
(RAILWAY ROLLING. AIRTIGHTNESS TESTS FOR PNEUMATIC AND ELECTROPNEUMATIC EQUIPEMENT.)
|
NF F11-806-1996
|
铁路车辆.压缩空气电路用截止塞阀
|
(RAILWAY ROLLING STOCK. SHUT-OFF PLUG VALVES, FOR COMPRESSED AIR CIRCUITS.)
|
NF F12-001-1972
|
铁路车辆.客车内顶灯. 外形尺寸.安装
|
(RAILWAY TRANSPORT EQUIPMENT. CEILING LIGHTS. CLEARANCE GAUGES AND FIXINGS.)
|
NF F12-100-2002
|
铁路设施.公共交通系统铁路车辆用电力照明
|
(Railway applications - Electrical lighting for rolling stock in public transport systems.)
|
NF F12-445-1988
|
铁路车辆.聚碳酸酯光漫射器
|
(ROLLING STOCK. LIGHT DIFFUSERS MADE OF POLYCARBONATE.)
|
NF F13-011-1989
|
铁路车辆.空调.墙上换气通道用的穿越道及尺寸
|
(RAILWAY ROLLING STOCK. AIRCONDITIONING. DIMENSIONS AND CLEARANCES RESERVED FOR VG-LENGTH AIR CONDUITS.)
|
NF F13-012-0-1991
|
铁路车辆.空调系统舒适度的测定.试验.概述
|
(RAILWAY ROLLING STOCK. DETERMINATION OF COMFORT CONNECTED WITH AN AIR-CONDITIONING SYSTEM FOR RAILWAY VEHICLES. TEST. GENRALITY.)
|
NF F13-012-1-1991
|
铁路车辆.空调系统舒适度的测定.通风试验
|
(RAILWAY ROLLING STOCK. DETERMINATION OF COMFORT CONNECTED WITH AN AIR-CONDITIONING SYSTEM FOR RAILWAU VEHICLES. AERAULIC TEST.)
|
NF F13-012-2-1991
|
铁路车辆.铁路车辆用空调系统舒适度的测定.热试验
|
(RAILWAY ROLLING STOCK. DETERMINATION OF COMFORT CONNECTED WITH AN AIR-CONDITIONING SYSTEM FOR RAILWAY VEHICLES. THERMIC TEST.)
|
NF F13-012-3-1991
|
铁路车辆.空调系统舒适度的测定.电气试验
|
(RAILWAY ROLLING STOCK. DETERMINATION OF COMFORT CONNECTED WITH AN AIR-CONDITIONING SYSTEM FOR RAILWAY VEHICLES. ELECTRICAL TEST.)
|
NF F13-012-5-1991
|
铁路车辆.空调系统舒适度的测定.安全试验
|
(RAILWAY ROLLING STOCK. DETERMINATION OF COMFORT CONNECTED WITH AN AIR-CONDITIONING SYSTEM FOR RAILWAY VEHICLES. SAFETY TEST.)
|
NF F13-012-6-1991
|
铁路车辆.空调系统舒适度的测定.验收规定
|
(RAILWAY ROLLING STOCK. DETERMINATION OF COMFORT CONNECTED WITH AN AIR-CONDITIONING SYSTEM FOR RAILWAY VEHICLES. REQUIREMENTS FOR ACCEPTANCE.)
|
NF F13-013-1991
|
铁路车辆.空调系统空气密封性试验
|
(RAILWAY ROLLING STOCK. AIRTIGHTNESS TEST OF AN AIR-CONDITIONING SYSTEM FOR RAILWAY VEHICLES.)
|
NF F13-016-1-2002
|
铁路设施.主干线机车车辆空调设备.第1部分:舒适度参数
|
(Railway applications - Air conditioning for main line rolling stock - Part 1 : comfort parameters.)
|
NF F13-209-1989
|
铁路车辆.非机械通风的电采暖散热器
|
(RAILWAY ROLLING STOCK. ELECTRIC RADIATORS,WITHOUT MECHANICAL VENTILATION.)
|
NF F13-825-1992
|
铁路车辆.空调或通风装置用合成纤维末道空气过滤网
|
(RAILWAY ROLLING STOCK. FINISHER AIR FILTERS, WITH SYNTHETIC FIBRES, FOR CONDITIONING OR VENTILATING UNITS.)
|
NF F13-835-1989
|
铁路车辆.有防护装置的机械通风电采暖器具
|
(RAILWAY ROLLING STOCK. ELECTRIC AIR HEATERS WITH SHIELDED ELEMENTS,WITH FORCED VENTILATION.)
|
NF F14-003-1989
|
铁路车辆.铁路车辆信号装置.活动信号装置. 插旗架. 特性
|
(Rolling stock. Flag bracket. Removable signalling.)
|
NF F14-024-1992
|
铁路车辆.速度、信号位置和行程记录--指示器.性能与合格要求
|
(RAILWAY ROLLING STOCK. SPEED, SIGNAL POSITION AND TRAVEL RECORDER-INDICATOR. CHARACTERISTIC AND APPROVAL REQUIREMENTS.)
|
NF F14-402-1981
|
铁路车辆.铁路车辆信号装置. 固定信号.电信号.位置和特性
|
(RAILWAY TRANSPORT EQUIPMENT. SIGNALLING EQUIPMENT FOR RAIL VEHICLES. FIXED SIGNALLING. ELECTRIC SIGNALS. ARRANGEMENT AND CHARACTERISTICS.)
|
NF F15-001-1987
|
铁路车辆.司机室和工作台的通道.结构要求
|
(ROLLING STOCK. ACCESS TO DRIVER`S CABS AND PLATFORMS. CONSTRUCTIONAL REQUIREMENTS.)
|
NF F15-002-1987
|
铁路车辆.动力机组前端高部位通道
|
(ROLLING STOCK. ACCESS TO THE HIGHER PART OF THE FRONT-ENDS OF POWER UNITS. CONSTRUCTIONAL REQUIREMENTS.)
|
NF F15-003-1987
|
铁路车辆.调轨车手扶栏杆的位置
|
(ROLLING STOCK. POSITIONING OF SHUNTERS` HANDRAILS.)
|
NF F15-004-1988
|
铁路车辆.操作部件用手柄和扶手
|
(ROLLING STOCK. HANDLES AND HANDRAILS FOR SHUNTERS.)
|
NF F15-818-1996
|
铁路车辆.正面的挡风玻璃
|
(RAILWAY ROLLING STOCK. FRONTAL WINDSCREENS.)
|
NF F16-101-1988
|
铁路车辆.防火性能.材料的选择
|
(ROLLING STOCK. FIRE BEHAVIOUR. MATERIALS CHOOSING.)
|
NF F16-102-1992
|
铁路车辆.防火性能.电器设备管用材料的选择、应用
|
(Railway rolling stock. Fire behaviour. Materials choosing, application for electric equipments.)
|
NF F16-103-1989
|
铁路车辆.消防.设计安排
|
(ROLLING STOCK. FIRE PROTECTION AND FIRE FIGHTING. DESIGN ARRANGEMENTS.)
|
NF F16-201-1990
|
铁路车辆.座席耐火试验
|
(RAILWAY ROLLING STOCK. FIRE RESISTANCE TEST FOR SEATS.)
|
NF F17-001-2001
|
铁路车辆.铁路车辆车体的结构要求
|
(Railway applications - Structural requirements of railway vehicle bodies.)
|
NF F17-011-1991
|
铁路车辆.车辆及其附助装置空气密封性的测定方法.试验和结果的说明
|
(RAILWAY ROLLING STOCK. MEASUREMENT METHODS OF AIRTIGHTNESS OF RAILWAY VEHICLE AND ITS ELEMENTS. TESTS AND INTERPRETATION OF RESULTS.)
|
NF F18-001-1988
|
铁路车辆.锰钢磨损板.特性.焊接规定
|
(ROLLING STOCK. WEARING PLATES MADE OF MANGANESES STEEL. CHARACTERISTICS. WELDING PRESCRIPTIONS.)
|
NF F18-101-1989
|
铁路车辆.轴用的转动轴箱.内轴颈.术语.概念
|
(RAILWAY ROLLING STOCK. ROLLER-BEARING AXLE-BOXES FOR WHEELSETS WITH OUTSIDE AXLE-JOURNALS.)
|
NF F18-102-1990
|
铁路车辆.带外轴颈车轴用轴承车轴箱.允差.表面状况
|
(RAILWAY ROLLING STOCK. ROLLER BEARING AXLE BOXES FOR OUTSIDE AXLE JOURNALS. TOLERANCES. SURFACE FINISH.)
|
NF F18-103-1990
|
铁路车辆.带外轴颈车轴用轴承车轴箱.材料.质量
|
(RAILWAY ROLLING STOCK. ROLLER BEARING AXLE BOXES FOR OUTSIDE AXLE JOURNALS. MATERIALS. QUALITY.)
|
NF F18-201-1989
|
铁路车辆.滚动轴承箱箱体的试验方法.在轴箱试验机上进行热试验
|
(RAILWAY ROLLING STOCK. METHOD OF TESTING ROLLER BEARING AXLE-BOX CASES. THERMAL TEST ON AXLE BOXES TEST MACHINE.)
|
NF F18-202-1989
|
铁路车辆.滚动轴箱的试验方法.在轴箱试验机上进行疲劳强度的试验
|
(RAILWAY ROLLING STOCK. METHOD OF TESTING ROLLING BEARINGS FOR AXLE-BOXES. ENDURING TEST ON AXLE BOXES TEST MACHINE.)
|
NF F18-206-1998
|
铁路车辆用具.轴箱.性能试验
|
(Railway applications. Axleboxes. Performance testing.)
|
NF F18-831-1992
|
铁路车辆.装置和牵引机车用滚动轴承.质量要求
|
(RAILWAY ROLLING STOCK. ROLLING BEARINGS FOR DRIVES AND TRACTION MOTORS. QUALITY REQUIREMENTS.)
|
NF F18-832-1990
|
铁路车辆.轴箱用的滚柱轴承.质量规定
|
(RAILWAY ROLLING STOCK. AXLEBOX ROLLER BEARINGS. QUALITY REQUIREMENTS.)
|
NF F19-141-1-1998
|
铁路车辆.通过在车体和元件部分喷漆进行防护和装饰
|
(RAILWAY ROLLING STOCK. PROTECTION AND ORNEMENTATION BY PAINTING OF CAR BODY AND COMPONENTS PARTS. PART 1 : GENERAL PRESCRIPTIONS.)
|
NF F19-141-2-1998
|
铁路车辆.通过在车体和元件部分喷漆进行防护和装饰.第2部分:喷涂系统的装饰性和实用性
|
(RAILWAY ROLLING STOCK. PROTECTION AND ORNEMENTATION BY PAINTING OF CAR BODY AND COMPONENTS PARTS. PART 2 : DESCRIPTION AND UTILIZATION OF PAINT SYSTEMS (EXCEPT WAGONS).)
|
NF F19-201-1996
|
铁路车辆.涂料和标志.一般规定和试验方法
|
(Railway rolling stock. Paint materials and marks. General instructions and tests method.)
|
NF F19-211-1990
|
铁路车辆.机车部件鉴定用的醇酸树脂
|
(RAILWAY ROLLING STOCK. ALKYD RESIN PAINTS FOR MARKING PARTS OF ROLLING STOCK.)
|
NF F19-212-1991
|
铁路车辆.用转印法打印车箱标识牌和铭牌用清漆
|
(RAILWAY ROLLING STOCK. VARNISH FOR APPLICATION OF MARKS AND REGISTRATIONS,OF VEHICLES,BY TRANSFER.)
|
NF F19-216-1993
|
铁路车辆.洗涤底漆
|
(RAILWAY ROLLING STOCK. WASH PRIMER.)
|
NF F19-217-1994
|
铁路车辆.镀锌层的高含量
|
(RAILWAY ROLLING STOCK. HIGH CONTENT OF ZINC COATING.)
|
NF F19-218-1993
|
铁路车辆.温度高达350℃用防腐蚀涂料
|
(RAILWAY ROLLING STOCK. ANTICORROSIVE PAINT RESISTANT TO TEMPERATURES UP TO 350 DEGREES CELSIUS.)
|
NF F19-219-1994
|
铁路车辆.工厂底漆
|
(RAILWAY ROLLING STOCK. SHOP PRIMER.)
|
NF F19-220-1992
|
铁路车辆.环氧树脂涂料.涂二层的保护和装饰体系
|
(RAILWAY ROLLING STOCK. EPOXY RESIN PAINTS. TWO-COAT PROTECTION AND DECORATION SYSTEM.)
|
NF F19-222-1992
|
铁路车辆.醇酸树脂涂料.单层保护体系
|
(RAILWAY ROLLING STOCK. ALKYD RESIN PAINTS. MONOCOAT PROTECTION SYSTEM.)
|
NF F19-223-1992
|
铁路车辆.环氧树脂漆.应力条件下防腐保护装置
|
(RAILWAY ROLLING STOCK. EPOXY RESIN PAINTS. PROTECTION SYSTEM TO PREVENT THE CORROSION UNDER STRESS.)
|
NF F19-283-1990
|
铁路车辆.二层保护系统用的醇酸树脂漆
|
(RAILWAY ROLLING STOCK. ALKYD RESIN PAINTS USED TO PROVIDE A TWO-COAT PROTECTION.)
|
NF F19-292-1995
|
铁路车辆.最后检修作业
|
(RAILWAY ROLLING STOCK. TOUCH UP PRIMER.)
|
NF F19-293-1997
|
铁路车辆.涂料
|
(RAILWAY ROLLING STOCK. PAINT.)
|
NF F19-295-1997
|
铁路车辆.高固态单涂层清漆
|
(RAILWAY ROLLING STOCK. HIGH SOLID MONOCOAT PAINT.)
|
NF F19-296-1998
|
铁路滚动存货车.用阻罩的油灰使用
|
(RAILWAY ROLLING STOCK. PUTTY APPLIED USING SPATTLE.)
|
NF F19-301-1991
|
铁路车辆.双层保护系统用水溶性涂料
|
(RAILWAY ROLLING STOCK. PAINTS WATERBORNES WITH WATER USED TO PROVIDE A TWO-COAT PROTECTION.)
|
NF F19-302-1995
|
铁路车辆.三层保护系统用水溶性涂料
|
(RAILWAY ROLLING STOCK. PAINTS WATERBORNES WITH WATER USED TO PROVIDE A THREE-COAT PROTECTION.)
|
NF F19-303-1996
|
铁路车辆.铝和铝合金用含水涂料单分子薄膜
|
(RAILWAY ROLLING STOCK. PAINT MONOCOAT WATERBORNE WITH WATER USED TO ALUMINIUM AND ALUMINIUM`S ALLOIES.)
|
NF F19-350-1998
|
铁路滚动存货车.线圈涂层板铝和铝合金
|
(RAILWAY ROLLING STOCK. COIL COATED SHEETS ALUMINIUM AND ALUMINIUM ALLOYS.)
|
NF F19-351-1996
|
铁路车辆.连续涂覆焊接钢
|
(RAILWAY ROLLING STOCK. CONTINUOUSLY WELDABLE PRIMER COATED SHEET STEEL.)
|
NF F19-352-1996
|
铁路车辆.内部气体容器涂料
|
(RAILWAY ROLLING STOCK. INSIDE AIR TANK PAINT.)
|
NF F19-355-1995
|
铁路车辆.电泳覆层制件
|
(RAILWAY ROLLING STOCK. CATAPHORECTIC COATING PIECES.)
|
NF F19-447-1997
|
铁路车辆.隔声水基产品
|
(RAILWAY ROLLING STOCK. SOUNDPROOFED WATER BASED PRODUCE.)
|
NF F19-449-1992
|
铁路车辆.隔声沥青产品
|
(RAILWAY ROLLING STOCK. SOUNDPROOFED BITUMINOUS PRODUCE.)
|
NF F19-477-1991
|
铁路车辆.聚酯树脂热固性粉末涂料
|
(RAILWAY ROLLING STOCK. THERMO SETTING POWDER PAINTS MADE OF POLYESTER RESINS.)
|
NF F19-478-1989
|
铁路车辆.热固性环氧树脂漆粉
|
(ROLLING STOCK. THERMO SETTING POWDER PAINTS MADE OF EPOXY RESINS.)
|
NF F19-480-1991
|
铁路车辆.转印法标记和记录车辆
|
(Railway rolling stock. Marks and registration of vehicles by transfer.)
|
NF F19-481-1994
|
铁路车辆.自粘标记
|
(RAILWAY ROLLING STOCK. SELF ADHESIVE MARKS.)
|
NF F19-483-1998
|
铁路滚动存货车.乱涂顶板型
|
(RAILWAY ROLLING STOCK. GRAFFITI PROOF TAPE.)
|
NF F19-501-1989
|
铁路车辆.滚动轴承用的油脂试验方法.在轴箱试验机上进行疲劳强度的试验
|
(RAILWAY ROLLING STOCK. METHOD OF TESTING GREASES FOR AXLE BOXES TO ROLLING BEARINGS. ENDURING TEST ON AXLE BOSES TEST MACHINE.)
|
NF F19-502-1989
|
铁路车辆.滚动轴用的油脂试验方法.在试验机上进行碰撞和振动强度的试验
|
(RAILWAY ROLLING STOCK. TEST METHOD OF GREASES FOR AXLE-BOXES TO ROLLING BEARING. VIBRATIONS AND SHOCKS ENDURING TEST ON MACHINE “ROPECS“.)
|
NF F19-503-1989
|
铁路车辆.轴箱的滚轴承用润滑脂试验方法.润滑脂氧化稳定性的动态试验
|
(RAILWAY ROLLING STOCK. TESTS METHOD OF GREASES FOR AXLE-BOXES TO ROLLING BEARINGS. DYNAMIC TEST FOR STABILITY TO OXYDATION OF GREASE.)
|
NF F19-504-1993
|
铁路车辆.滚动轴承轴箱润滑脂试验方法.“R2F“机润滑稳定性试验
|
(RAILWAY ROLLING STOCK. METHOD OF TEST FOR GREASES FOR ROLLER BEARING AXLE-BOXES. GREASE SUITABILITY TEST ON THE “R2F“ MACHINE.)
|
NF F19-505-1991
|
铁路车辆.转动轴箱用的润滑油试验方法.在试验台上进行振动、碰撞、旋转的强力试验
|
(RAILWAY ROLLING STOCK. TESTING METHOD OF GREASES FOR AXLE-BOXES WITH ROLLING BEARINGS. VIBRATIONS,SHOCKS,ROTATION AND PRESSURES ENDURING TEST ON “ROPECACS“ MACHINE.)
|
NF F19-601-1991
|
铁路车辆.再循环密封抽水马桶里使用的添加剂
|
(RAILWAY ROLLING STOCK. ADDITIVE PRODUCT USED IN RECIRCULATION RETENTION TOILETS.)
|
NF F19-809-1-1994
|
铁路车辆.原动力机械运输用耐高压油.第1部分:矿物油
|
(RAILWAY ROLLING STOCK. OILS AT “EXTREME PRESSURE“ FOR THE MECHANICAL TRANSMISSIONS OF MOTIVE POWER UNITS. PART 1 : MINERAL OILS.)
|
NF F19-809-2-1997
|
铁路车辆.原动力机械运输用耐高压Huiles.第2部分:高压稳定油.一般要求
|
(RAILWAY ROLLING STOCK. HUILES “EXTREME PRESSURE“ OILS FOR MECHANICAL TRANSMISSIONS OF MOTIVE POWER UNITS. PART 2 : HIGH THERMAL STABILITY OIL. GENERAL INSTRUCTIONS.)
|
NF F19-809-3-1997
|
铁路车辆.原动力机械运输用耐高压油.第3部分:高热稳定性油.后部固定机械的耐久性试验
|
(RAILWAY ROLLING STOCK. “EXTREME PRESSURE“ OILS FOR MECHANICAL TRANSMISSIONS OF MOTIVE POWER UNITS. PART 3 : HIGH THERMAL STABILITY OIL. ENDURANCE TEST METHOD ON FIXED POST MACHINE.)
|
NF F19-813-1991
|
铁路机车.轴箱中球面轴承用的润滑油.质量规定
|
(RAILWAY ROLLING STOCK. GREASES USED AS LUBRICANTS OF ROLLER BEARING AXLEBOXES. QUALITY REQUIREMENTS.)
|
NF F21-001-1990
|
铁路车辆.导电弓.特性和试验
|
(Railway rolling stock. Pantographs. Characteristics and tests.)
|
NF F21-002-1989
|
铁路车辆.车顶和集电弓用的绝缘架.特性和试验
|
(RAILWAY ROLLING STOCK. INSULATORS FOR PANTOGRAPHS AND ROOF CABLES. CHARACTERISTICS AND TESTS.)
|
NF F21-206-1-2000
|
铁路应用.滚动运货.导电弓架:特性和试验.第1部分:主线车辆的导电弓架
|
(Railway applications - Rolling stock - Pantographs : characteristics and tests - Part 1 : pantographs for main line vehicles.)
|
NF F21-206-2-2000
|
铁路应用.滚动运货.导电弓架:特性和试验.第2部分:地下铁道和轻型铁路车辆的导电弓架
|
(Railway applications - Rolling stock - Pantographs : characteristics and tests - Part 2 : pantographs for metro and light rail vehicles.)
|
NF F24-003-1968
|
铁路车辆.轻型器材.管道系统.带复曲支承面套筒和尾端的可拆卸管和前端连接器
|
(RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. REMOVABLE PIPE AND NOSE COUPLINGS WITH TORIC BEARING SURFACE SLEEVES AND TAIL ENDS.)
|
NF F24-004-1968
|
铁路车辆.轻型器材.管道系统.由三个工件组成的带复曲支承面套筒和尾端的可拆卸管和前端连接器
|
(RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. 3-PIECE REMOVABLE PIPE AND NOSE COUPLINGS WITH TORIC BEARING SURFACE SLEEVES AND TAIL ENDS.)
|
NF F24-005-1968
|
铁路车辆.轻型器材.管道系统.摆动式管接头
|
(RAILWAY TRANSPORT EQUIPMENT. WEIGHT-SAVING EQUIPMENT. PIPEWORK. SWIVEL CONNECTORS.)
|
NF F31-001-1972
|
铁路车辆.墙上固定的液体肥皂分配器. 外形尺寸. 安装
|
(RAILWAY TRANSPORT EQUIPMENT. SOAP DISPENSER WITH WALL-FIXING GAUGES-FIXINGS.)
|
NF F31-002-1975
|
铁路车辆.厚度为4.5-10mm的滑动窗玻璃用活动钮. 窗玻璃孔
|
(RAILWAY TRANSPORT EQUIPMENT. OPERATING BUTTON FOR SLIDING GLASS PANELS OF 4.5 TO 10 MM THICKNESS. CORRESPONDING HOLE IN GLASS PANEL.)
|
NF F31-003-1994
|
铁路车辆.列车运行去向牌和悬挂装置
|
(Railway rolling stock. Destination or locative outside plate and suspension device.)
|
NF F31-004-1976
|
铁路车辆.列车运行去向牌用牌插
|
(RAILWAY TRANSPORT EQUIPMENT. SUSPENSION HOOK FOR EXTERNALLY DISPLAYED DESTINATION OR LOCATING BOARD.)
|
NF F31-005-1976
|
铁路车辆.列车运行去向牌用卡锁牌插
|
(RAILWAY TRANSPORT EQUIPMENT. SUSPENSION HOOK WITH CATCH FOR EXTERNALLY DISPLAYED DESTINATION OR LOCATING BOARD.)
|
NF F31-011-1983
|
铁路车辆.非饮用水贮水箱的注水接头
|
(Rolling stock. Connecting pipe for filling non-drinking water tanks.)
|
NF F31-012-1978
|
铁路车辆.号码牌
|
(RAILWAY TRANSPORT EQUIPMENT. OUTSIDE NUMBER PLATE.)
|
NF F31-013-1978
|
铁路车辆.号码牌架
|
(RAILWAY TRANSPORT EQUIPMENT. NUMBER PLATE BRACKET.)
|
NF F31-014-1977
|
铁路车辆.公告牌用悬挂钩
|
(RAILWAY TRANSPORT EQUIPMENT.SIGN SUSPENSION HOOK.)
|
NF F31-016-1972
|
铁路车辆.标准轨距客车用折棚连接台. 外形尺寸和安装. 尺寸和公差
|
(RAILWAY TRANSPORT EQUIPMENT. CONNECTION FOR FLANGE INTERCOMMUNICATION FOR STANDARD-GAUGE LINE STOCK. SIZE AND FASTENING-MEASUREMENTS AND TOLERANCES.)
|
NF F31-020-1990
|
铁路车辆.带凸点的橡胶板. 使用型号
|
(Railway rolling stock. Relief slabs made of ruber. Types to be used.)
|
NF F31-031-1990
|
铁路车辆.内铰链式门插锁.互换性规格和功能规格
|
(RAILWAY ROLLING STOCK. MORTISE LOCKS FOR INNER HINGED DOORS. INTERCHANGEABILITY SPECIFICATIONS AND FUNCTIONNAL SPECIFICATIONS.)
|
NF F31-032-1990
|
铁路车辆.内铰链式门板把锁.互换性规格和功能规格
|
(RAILWAY ROLLING STOCK. BRACKET LOCKS FOR INNER HINGED DOORS. INTERCHANGEABILITY SPECIFICATIONS AND FUNCTIONNAL SPECIFICAITONS.)
|
NF F31-041-1990
|
铁路车辆.车内旋转门.互换性特征和功能特性
|
(Railway rolling stock. Interior swing doors. Interchangeability characteristics and functional characteristics.)
|
NF F31-042-1990
|
铁路车辆.车内旋转门构件.互换性特征和功能特性
|
(Railway rolling stock. Component parts of interior swing doors. Interchangeability characteristics and functional characteristics.)
|
NF F31-045-1990
|
铁路车辆.手动内推拉门.互换性特征和功能特性
|
(Railway rolling stock. Manual interior sliding doors. Interchangeability characteristics and functional characteristics.)
|
NF F31-046-1990
|
铁路车辆.手动内推拉门构件.互换性特征和功能特性
|
(Railway rolling stock. Component parts of interior sliding doors. Interchangeability characteristics and functional characteristics.)
|
NF F31-051-1979
|
铁路车辆.长途客车. 台阶
|
(RAILWAY TRANSPORT EQUIPMENT. MAIN-LINE PASSENGER ROLLING STOCK. COACH STEPS.)
|
NF F31-052-1994
|
铁路车辆.旅客通道的门.概论.术语
|
(Railway rolling stock. Carriage doors. Generalities. Terminology.)
|
NF F31-053-1991
|
铁路车辆.车速在160-200KM/H范围内的客车车门.特征.操作.检查与试验
|
(Railway rolling stock. Carriage access doors with running speed included in 160 to 220 km/H range. Characteristics. Operating. Checks and tests.)
|
NF F31-054-1994
|
铁路车辆.旅客通道的门.特性.检验和试验
|
(RAILWAY ROLLING STOCK. CARRIAGE ACCESS DOORS. CHARACTERISTICS. OPERATING. CHECKS AND TESTS.)
|
NF F31-057-1991
|
铁路车辆.车速超过220km/H的客车车门.特性.操作.检查与试验
|
(Railway rolling stock. Carriage access doors with running speed greater than 220 km/H. Characteristics. Operating. Checks and tests.)
|
NF F31-101-1987
|
铁路车辆. 客车. 行李车自推进车棚.车底架和箱形截面梁车架公差和尺寸特性
|
(Rolling stock. Dimensional characteristics and tolerances for the underframes and body-shells of passanger coaches, vans and self-propelled units.)
|
NF F31-111-1989
|
铁路车辆.旅客列车车内的清洗
|
(RAILWAY ROLLING STOCK. INNER CLEANING OF PASSENGER COACHING STOCK. DESIGN ARRANGEMENTS.)
|
NF F31-112-1994
|
铁路车辆.与石墨有关的防护.材料和挤压产品的性能评定的试验程序和方法
|
(RAILWAY ROLLING STOCK. PROTECTION IN RELATION TO GRAFFITI. TESTS PROCEDURES AND METHODS OF VALUATION, BEHAVIOUR OF MATERIALS AND PRODUCTS OF EXPULSION.)
|
NF F31-116-1990
|
铁路车辆.座位臀点的测定
|
(Railway rolling stock. Determination of the H point of seat.)
|
NF F31-118-1992
|
铁路车辆.防人为破坏面层.特性和试验
|
(RAILWAY ROLLING STOCK. VANDAL-PROOF COVERING. CHARACTERISTICS AND TESTS.)
|
NF F31-119-1995
|
铁路车辆.在静电应力、疲劳应力、振动和冲击应力下铁路车辆座位的特性
|
(RAILWAY ROLLING STOCK. BEHAVIOUR OF ROLLING STOCK`S SEATS AT STATICS STRESS, FATIGUE STRESS, VIBRATIONS STRESS AND SHOCKS STRESS.)
|
NF F31-446-1989
|
铁路车辆.带装饰面或保护面的复合材料板
|
(ROLLING STOCK. COMPOSITE PANELS WITH DECORATED OR PROTECTED FACES.)
|
NF F31-447-1989
|
铁路车辆.表面用热固性树脂装潢的胶合板
|
(ROLLING STOCK. LAMINATED PANELS WITH DECORATED SURFACE,MADE OF THERMOSETTING RESINS.)
|
NF F31-496-1989
|
铁路车辆.聚乙烯水箱
|
(RAILWAY ROLLING STOCK. WATER-TANKS MADE OF POLYETHYLENE.)
|
NF F31-812-1990
|
铁路车辆.橡胶地面覆盖物
|
(RAILWAY ROLLING STOCK. RUBBER FLOOR COVERINGS.)
|
NF F31-829-1990
|
铁路车辆.盥洗室用卫生纸
|
(RAILWAY ROLLING STOCK. TOILET PAPER FOR RETENTION TOILETS.)
|
NF F32-101-1978
|
铁路车辆.双轴装卸转向架. 标准架的测定. 几何检验
|
(RAILWAY TRANSPORT EQUIPMENT. TWO AXLE CARRYING BOGIE FRAMES. DETERMINATION OF REFERENCE ELEMENTS. GEOMETRICAL CHECKS.)
|
NF F33-004-1983
|
铁路车辆.制动重量. 工作状态变换牌
|
(Railway transport equipment. Wagons. Braked masses. Brake changeover plates.)
|
NF F33-005-1986
|
铁路车辆.钢板弹簧. 抛物状弹簧
|
(ROLLING STOCK. LEAF SPRINGS. PARABOLIC SPRINGS.)
|
NF F33-006-1986
|
铁路车辆.钢板弹簧. 抛物状弹簧用可变截面的钢板
|
(ROLLING STOCK. LEAF SPRINGS. LEAVES WITH VARIABLE CROSS-SECTION FOR PARABOLIC SPRINGS.)
|
NF F33-010-1982
|
铁路车辆.车厢制动轮用火花档板
|
(Railway transport equipment. Spark arrestor plates for braked wagon wheels.)
|
NF F33-011-1987
|
铁路车辆.截货车的尺寸特征
|
(ROLLING STOCK. FREIGHT WAGON DIMENSIONAL CHARACTERISTICS FOR USE.)
|
NF F33-102-1975
|
铁路车辆.带单轴钢板弹簧悬挂装置.有车体或无车体的货车底架. 尺寸检验,公差
|
(RAILWAY TRANSPORT EQUIPMENT. WAGON FRAMES WITH OR WITHOUT BODY WITH INDEPENDENT AXLES AND LEAF SPRING SUSPENSION. DIMENSIONAL CHECKS. TOLERANCES.)
|
NF F33-103-1975
|
铁路车辆.有车体或无车体的转向架货车底架. 尺寸检验. 公差
|
(RAILWAY TRANSPORT EQUIPMENT. FRAMES OF BOGIE WAGON WITH OR WITHOUT BODY. DIMENSIONAL CHECKS. TOLERANCES.)
|
NF F33-104-1981
|
铁路车辆.有车体或无车体的由三个自由轴绞接的叠板弹簧支承的货车底架. 尺寸检验. 公差
|
(RAILWAY TRANSPORT EQUIPMENT. FRAMES WITH OR WITHOUT BODY OF ARTICULATED WAGONS INCLUDING 3 INDEPENDENT AXLES AND LEAF SPRING SUSPENSION. DIMENSIONAL CHECKS. TOLERANCES.)
|
NF F33-105-1987
|
铁路车辆. 带或不车体的由3个转向架组成的货车底架的尺寸检验和公差
|
(Rolling stock. Dimensional checking and tolerances of underframes with or without body of articulated wagons with 3 bogies.)
|
NF F33-401-1988
|
铁路车辆.标准轨距车辆用货车和行李车板条和地板
|
(ROLLING STOCK. SIDE PLANKS AND BOARDS FOR STANDAR-GAUGE LINE WAGONS AND VANS.)
|
NF F33-500-1-2004
|
铁路设施.新型和改造的货运车辆的测量.第1部分:测量原则
|
(Railway applications - Measuring of new and modified freight wagons - Part 1 : measuring principles.)
|
NF F33-500-2-2004
|
铁路设施.新型和改造的货运车辆的测量.第2部分:带平衡悬架的货运车
|
(Railway applications - Measuring of new and modified freight wagons - Part 2 : freight wagons with bogies.)
|
NF F33-500-3-2004
|
铁路设施.新型和改造的货运车辆的测量.第3部分:两轮副货运车
|
(Railway applications - Measuring of new and modified freight wagons - Part 3 : freight wagons with 2 wheelsets.)
|
NF F36-001-1975
|
铁路车辆.工业货车. 标称直径为50的通用“AIR“ 调节接头
|
(RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. STANDARD 50 MM AIR COUPLING.)
|
NF F36-002-1974
|
铁路运输设备.工业货车.50MM气体导径管接头
|
(RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. 50 MM AIR ADAPTOR COUPLING.)
|
NF F36-003-1977
|
铁路车辆.工业货车. 标称直径为50的通用“AIR“ 接头的安装
|
(RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. PLUG FOR STANDARD 50 MM AIR COUPLING.)
|
NF F36-004-1977
|
铁路车辆.工业货车. GUILLEMIN系统对称快速半接头的安装
|
(RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. ALTERNATIVES FOR FITTING STANDARD 50 MM AIR COUPLING.)
|
NF F36-005-1977
|
铁路车辆.工业货车. 标准连接装置. 览表
|
(RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. ALTERNATIVES FOR FITTING THE GUILLEMIN-TYPE QUICK-ACTION HALF-COUPLING.)
|
NF F36-010-1979
|
铁路运输设备.工业货车.标准化连接的列表
|
(RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. LIST OF STANDARDIZED CONNECTIONS.)
|
NF F37-005-1982
|
铁路车辆.罐车. 加热器. 识别牌. 检验牌和服务牌
|
(Railway transport equipment. Tank wagons. Heater test and service indicator plate.)
|
NF F37-010-1984
|
铁路车辆.石油或类似品和酒精用罐车.容量标牌
|
(Railway transport equipment. Tank wagons, removable tank wagons and tank container wagons. Gauging identification board.)
|
NF F37-012-1989
|
液体或低压溶解气体运输用油罐车. 识别和装载牌
|
(TANK WAGONS FOR THE CARRIAGE OF LIQUEFIED OR UNDER PRESSURE DISSOLVED GASES. IDENTITY AND LOADING PLATE.)
|
NF F37-022-1968
|
铁路车辆.“ 盐酸“ 类罐车. 直径为50mm和80mm的力排空圆顶盖
|
(RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS HYDROCHLORIC ACID TYPE. DOME COVER FOR PRESSURE DISCHARGE (50 MM AND 80 MM DIAMETER).)
|
NF F37-0221-1979
|
铁路车辆.“盐酸“类罐车.直径为50mm和80mm压力排空圆顶盖
|
()
|
NF F37-027-1970
|
铁路车辆.罐车. 堵塞凸缘
|
(RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS. DUMMY FLANGES.)
|
NF F37-031-1974
|
铁路车辆.罐车. 蒸汽加热. 蒸汽进口
|
(RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS. STEAM HEATING SYSTEMS. STEAM INLET.)
|
NF F37-0331-1976
|
铁路车辆.罐车.特殊标记.标记的位置和铭牌
|
()
|
NF F37-036-1982
|
铁路车辆.与大气隔绝的产品用罐车.负压板
|
(Railway transport equipment. Tank wagons for goods insulated from the atmosphere. Depression plate.)
|
NF F37-037-1976
|
铁路车辆.液态工产品罐车. 吸液盖
|
(RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS FOR CHEMICALS. DRAWING CUP.)
|
NF F37-040-1977
|
铁路车辆.底部技压灌注排放的液化气罐车.压力小于40bar.计量.排气和试验用孔
|
(RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS FOR CARRYING LIQUIFIED GASES UNDER PRESSURE AND HAVING BOTTOM FILLING AND EMPTYING DEVICES. MAXIMUM SERVICE PRESSURE 40 BARS. AIR ORIFICE FOR GAUGING,DEGASSING AND TESTING.)
|
NF F37-042-1989
|
石油和化工液态产品运输用油罐车. 识别和装载牌
|
(TANK WAGONS FOR THE CARRIAGE OF LIQUID CHEMICAL AND OIL PRODUCT. IDENTITY AND LOADING PLATE.)
|
NF F37-044-1984
|
铁路运输设备.设备检修油罐车牌
|
(RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS PLATE FOR THE OVERHAUL OF EQUIPMENT UNITS.)
|
NF F37-060-1983
|
铁路运输设备.液态化工产品运输用罐车和贮液集装箱.带扣钉螺栓闭锁装置的圆顶盖
|
(RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS AND TANK CONTAINERS FOR CARRYING LIQUID CHEMICAL PRODUCTS. DOME COVER WITH A TOGGLE-BOLT CLOSING DEVICE.)
|
NF F37-100-2-2003
|
铁路设施.油罐车.第2部分:包括回流蒸气的液体产品用底卸式装置
|
(Railway applications - Tank wagons - Part 2 : bottom emptying devices for liquid products including vapour return.)
|
NF F37-100-3-2003
|
铁路设施.油罐车.第3部分:压力下液化气用底部装卸式装置
|
(Railway applications - Tank wagons - Part 3 : bottom filling and emptying devices for gases liquefied under pressure.)
|
NF F37-100-4-2003
|
铁路设施.油罐车.第4部分:液态产品用顶部装卸式装置
|
(Railway applications - Tank wagons - Part 4 : top devices for top emptying and filling of liquid products.)
|
NF F37-100-5-2003
|
铁路设施.油罐车.第5部分:液态产品用顶部装填、底部卸料式装置
|
(Railway applications - Tank wagons - Part 5 : top devices for bottom emptying and top filling of liquid products.)
|
NF F37-100-6-2003
|
铁路设施.油罐车.第6部分:人孔
|
(Railway applications - Tank wagons - Part 6 : manholes.)
|
NF F38-001-1975
|
铁路运输设备.采用最大压力为2.5bar排空的散装粉状产品运输用气动排空车.粉导管用统一接头
|
(RAILWAY TRANSPORT EQUIPMENT. WAGONS WITH PNEUMATIC DISCHARGE,FOR CARRYING POWDER GOODS IN BULK WITH DISCHARGE AT MAXIMUM OPERATING PRESSURE OF 2.5 BAR. STANDARD AIR PIPE CONNECTION.)
|
NF F38-002-1971
|
铁路运输设备.采用最大压力为2.5bar排空的散粉状产品运输用气动排空车.散粉导管用统一接头
|
(RAILWAY TRANSPORT EQUIPMENT. WAGONS WITH PNEUMATIC DISCHARGE FOR CARRYING POWDER GOODS IN BULK. DISCHARGE AT MAXIMUM SERVICE PRESSURE OF 2.5 BARS.)
|
NF F38-002M-1976
|
铁路运输设备.采用最大压力为2.5bar的散装粉状产品运输用气动排空车.排空粉导管用统一接头
|
()
|
NF F52-131-1990
|
铁路固定装置.“有轨电车“道岔
|
(RAILWAY FIXED EQUIPMENT. “TRAMWAY“ POINTS AND CROSSING.)
|
NF F52-163-1995
|
铁路固定设备.指示和行人穿越道的锁定.带有钻石滑动开关的行人穿越道指示行车的锁定
|
(RAILWAY FIXED EQUIPMENT. LOCKING OF POINTS AND CROSSING. LOCKING DEPENDENT OF DRIVING OF POINTS CROSSING WITH SLIDING SWITCH DIAMOND.)
|
NF F56-353-1980
|
铁路固定设备.通讯和信号装置架空线路用器材.停车和分轨用立式双托架
|
(FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD ELECTRIC TELECOMMUNICATION AND SIGNALLING LINES. DOUBLE VERTICAL STOP AND SHUTOFF BRACKET.)
|
NF F57-001-1991
|
铁路固定设备.调车场.道岔的自动控制.用“射门“法自动控制刹车.作用原理.特性
|
(RAILWAY FIXED EQUIPMENT. MARSHALLING YARD. AUTOMATIC POINTS AND RAIL BRAKE CONTROL. (PRECISION FIRING METHOD). OPERATING PRINCIPLES. CHARACTERISTICS.)
|
NF F57-015-1990
|
铁路固定设备.车辆调度编组场用的脚踏板:特性
|
(RAILWAY FIXED EQUIPMENT. ELECTRONIC TREADLE FOR MARSHALLING YARD. CHARACTERISTICS.)
|
NF F58-001-1990
|
铁路固定设备.在轨道U.T.C.铁路上运行的第3类车辆的行车规定
|
(RAILWAY TRACK CONSTRUCTION AND MAINTENANCE PLANT. APPROVAL OF PLANT OF THIRD PARTY OWNERSHIP FOR RUNNING ON UIC GAUGE RAILWAY TRACK.)
|
NF F58-002-1991
|
铁路建造和整套维护设备.车辆在UIC铁路上运行时的铁路建造和整套维护设备的规定
|
(RAILWAY TRACK CONSTRUCTION AND MAINTENANCE PLANT. APPROVAL OF RAILWAY TRACK CONSTRUCTION AND MAINTENANCE PLANT FOR OPERATION ON UIC GAUGE TRACKS.)
|
NF F58-051-1991
|
道路工程设备.铁路车辆上的个人升降机.安全的一般规则
|
(RAILWAY TRACK CONSTRUCTION AND MAINTENANCE PLANT. PERSONNEL CARRYING HOISTS ON RAILWAY VEHICLES. GENERAL SAFETY RULES.)
|
NF F59-010-1974
|
铁路固定设备.火车时刻表和告示牌的表示.告示牌尺寸
|
(FIXED RAILWAY INSTALLATIONS. PRESENTATION OF TIMETABLE AND ADVERTISING POSTERS. SIZE OF POSTERS.)
|
NF F59-011-1974
|
铁路车辆.火车时刻表和告示牌的表示.框
|
(FIXED RAILWAY INSTALLATIONS. PRESENTATION OF TIMETABLE AND ADVERTISING POSTERS. FRAMES.)
|
NF F60-001-1989
|
铁路车辆.直流供电的电气和电子设备.过电压试验
|
(RAILWAY ROLLING STOCK. ELECTRICAL AND ELECTRONIC EQUIPMENTS SUPPLIED WITH DIRECT CURRENT. OVERVOLTAGE TESTS.)
|
NF F60-002-1985
|
铁路车辆.电气和电子设备.正弦曲线振荡试验
|
(Railway rolling stock. Electric and electronic devices. Sinusoidal vibrations tests.)
|
NF F60-100-2002
|
铁路设施.铁路车辆.防电气危险的保护装置
|
(Railway applications - Rolling stock - Protective provisions relating to electrical hazards.)
|
NF F60-101-1991
|
铁路车辆.绝缘调整.在空气中的绝缘距离和仪器设备的漏电路
|
(RAILWAY ROLLING STOCK. INSULATION CO-ORDINATION CLEARENCE AND CREEPAGE DISTANCES FOR APPARATUS AND FOR EQUIPMENT.)
|
NF F61-010-1994
|
铁路车辆.架线和装置的机械固定的一般规则
|
(RAILWAY ROLLING STOCK. GENERAL RULES FOR CABLING AND APPARATUS MECHANICAL FIXING.)
|
NF F61-011-1989
|
铁路车辆.电气连接用铜螺旋旋入接头.紧固扭矩G.纺织和皮革
|
(Railway rolling stock. Screwed joint for electrical copper connections driving torque.)
|
NF F61-012-1998
|
铁路车辆.电感器和电缆的选择标准
|
(Railway rolling stock. Selection criteria for electrical conductors and cables.)
|
NF F61-013-1996
|
铁路车辆.电线和电缆的安装和固定
|
(RAILWAY ROLLING STOCK. INSTALLATION AND FIXING OF ELECTRICALS WIVES AND CABLES.)
|
NF F61-014-1998
|
铁路车辆.护套电缆和辫状线的电气连接
|
(Railway rolling stock. Electrical connecting of braided wire and shielded cable.)
|
NF F61-016-1998
|
铁路车辆.连接和电仪表柱形绝缘子
|
(Railway rolling stock. Connecting and electrical apparatus post insulators.)
|
NF F61-021-1990
|
铁路车辆.用于铝制导电引线的螺纹接头.上紧力矩
|
(RAILWAY ROLLING STOCK. SCREWED JOINT FOR ELECTRICAL ALUMINIUM CONNCECTIONS DRIVING TORQUE.)
|
NF F61-030-1992
|
铁路车辆.电连接器.总则
|
(RAILWAY ROLLING STOCK. ELECTRICAL CONNECTORS. GENERALITIES.)
|
NF F61-032-1994
|
铁路车辆.电连接器.加工装置控制型
|
(RAILWAY ROLLING STOCK. ELECTRICAL CONNECTORS. TYPE WITH FLOAT MOUNTING.)
|
NF F61-343-2003
|
铁路设施.机车车辆.电缆敷设的安装规则
|
(Railway applications - Rolling stock - Rules for installation of cabling.)
|
NF F61-349-1990
|
铁路车辆.导线和电缆用卡圈
|
(RAILWAY ROLLING STOCK. CABLE CLAMP COLLARS FOR ELECTRIC CONDUCTORS AND CABLES.)
|
NF F62-000-1991
|
铁路车辆.电工器件和设备的一般规则
|
(Railway rolling stock. General rules for electrotechnical components and equipments.)
|
NF F62-001-1-1991
|
铁路车辆.控制和辅助线路用最大电流热磁电机微型电路断电器.一般特性和试验
|
(RAILWAY ROLLING STOCK. MAGNETO-THERMIC MICROCIRCUIT-BREAKERS FOR MAXIMUM CURRENT FOR CONTROLS AND AUXILIARIES CIRCUITS. GENERALITIES AND TESTS.)
|
NF F62-001-2-1991
|
铁路车辆.控制和辅助线路用最大电流热磁电机微型电路断电器.尺寸
|
(RAILWAY ROLLING STOCK. MAGNETO-THERMIC MICROCIRCUIT-BREAKERS FOR MAXIMUM CURRENT FOR CONTROLS AND AUXILIARIES CIRCUITS. DIMENSION.)
|
NF F62-001-3-1991
|
铁路车辆.控制和辅助线路用最大电流热磁电机微型电路断电器.特殊簧片总成
|
(RAILWAY ROLLING STOCK. MAGNETO-THERMIC MICROCIRCUIT-BREAKERS FOR MAXIMUM CURRENT FOR CONTROLS AND AUXILIAIRIES CIRCUITS. COLLECTION OF PARTICULFAR LEAVES.)
|
NF F62-002-1-1993
|
铁路车辆.“有“或“无“接触式继电器和固定连接器.总则和试验
|
(RAILWAY ROLLING STOCK. ALL-OR-NOTHING CONTACT RELAY AND ITS FIXED CONNECTOR. GENERAL AND TESTING.)
|
NF F62-002-2-1993
|
铁路车辆.“有“或“无“接触式继电器和固定连接器.特殊离合连接
|
(RAILWAY ROLLING STOCK. ALL-OR-NOTHING CONTACT RELAY AND ITS FIXED CONNECTOR . COLLECTION OF PARTICULAR LEAVES.)
|
NF F62-011-1-1992
|
铁路车辆.一般功能要求.晶体管镇流器.一般性及试验
|
(RAILWAY ROLLING STOCK. FUNCTIONAL GENERAL REQUIREMENTS. TRANSISTORIZED BALLASTS. GENERALITIES AND TESTS.)
|
NF F62-011-2-1992
|
铁路车辆.一般功能要求.晶体管镇流器.特殊叶片间的联系
|
(RAILWAY ROLLING STOCK. FUNCTIONAL GENERAL REQUIREMENTS. TRANSISTORIZED BALLASTS. COLLECTION OF PARTICULAR LEAVES.)
|
NF F62-102-1998
|
铁路固定设备和铁路车辆.可控制的金属结构电容器
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. CONTROLLABLE METALLIZED FRAME CAPACITORS.)
|
NF F62-201-1989
|
铁路车辆.客车电力供应的连接.互换性
|
(Rolling stock. Coupling gear for electrical power supply to passenger stock. Interchangeability conditions.)
|
NF F62-311-2003
|
铁路设施.照明荧光灯用铁路车辆直流供电电子镇流器
|
(Railway applications - Rolling stock D.C. supplied electronic ballasts for lighting fluorescent lamps.)
|
NF F62-601-1993
|
铁路车辆.电池充电器.控制完成目的能力的规则
|
(RAILWAY ROLLING STOCK. BATTERY CHARGERS. RULES GOVERNING THE ABILITY TO FULFILL THEIR PURPOSE.)
|
NF F63-264-1-2002
|
铁路设施.有特殊防火性能的铁路车辆电缆.标准壁厚.第1部分:一般要求
|
(Railways applications - Railway rolling stock cables having special fire performance - Standard wall - Part 1 : general requirements.)
|
NF F63-264-2-2002
|
铁路设施.有特殊防火性能的铁路车辆电缆.标准壁厚.第2部分:单芯电缆
|
(Railways applications - Railway rolling stock cables having special fire performance - Standard wall - Part 2 : single core cables.)
|
NF F63-264-3-2002
|
铁路设施.有特殊防火性能的铁路车辆电缆.标准壁厚.第3部分:多芯电缆
|
(Railway applications - Railway rolling stock cables having special fire performance - Standard wall - Part 3 : multicore cables.)
|
NF F63-295-1992
|
铁路车辆.铁路车辆电缆.具有防火性能的绝缘电缆和软线
|
(RAILWAY ROLLING STOCK. CABLES FOR ROLLING STOCK. INSULATED CABLES AND FLEXIBLE CORDS WITH RESPECT TO BEHAVIOUR IMPROVED TO FIRE.)
|
NF F63-296-1992
|
铁路车辆.耐粗柴油的绝缘电缆和软线
|
(RAILWAY ROLLING STOCK. INSULATED CABLES AND FLEXIBLES CORDS GAS OIL RESISTANT.)
|
NF F63-305-2002
|
铁路设施.有特殊燃烧性能的铁路车辆电缆.试验方法
|
(Railway applications - Railway rolling stock cables having special fire performance - Test methods.)
|
NF F63-306-1-2003
|
铁路设施.有专门防火性能的铁道车辆电缆.薄壁.第1部分:一般要求
|
(Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1 : general requirements.)
|
NF F63-306-2-2003
|
铁路设施.有专门防火性能的铁道车辆电缆.薄壁.第2部分:单芯电缆
|
(Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2 : single core cables.)
|
NF F63-306-3-2003
|
铁路设施.有专门防火性能的铁道车辆电缆.薄壁.第3部分:屏蔽的和用薄护套的单芯和多芯电缆(双芯、三芯和四芯
|
(Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3 : single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed.)
|
NF F63-306-4-2003
|
铁路设施.有专门防火性能的铁道车辆电缆.薄壁.第4部分:有标准厚度护套的多芯和多对绞线的电缆
|
(Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4 : multicore and multipair cables standard wall sheathed.)
|
NF F63-307-1989
|
铁路车辆.电气和电子设备铠装电缆用导线和电缆
|
(ROLLING STOCK. CONDUCTORS AND CABLES USED FOR THE CABLING OF SHEATHED ELECTRIC AND ELECTRONIC EQUIPMENT.)
|
NF F63-436-1993
|
铁路车辆.电导体和电缆保护用软护套
|
(RAILWAY ROLLING STOCK. FLEXIBLE SHEATHS FOR THE PROTECTION OF ELECTRICAL CONDUCTORS AND CABLES.)
|
NF F63-808-1992
|
铁路车辆.无卤电导线和薄绝缘、薄保护层电缆
|
(Railway rolling stock. Halogen free, electrical conductors and cables with thin insulation and protective layers.)
|
NF F63-809-1992
|
铁路车辆.低卤化电连接器和薄绝缘层及保护层电缆
|
(RAILWAY ROLLING STOCK. LOW HALOGEN ELECTRICAL CONDUCTORS AND CABLES WITH THIN INSULATION AND PROTECTIVE LAYERS.)
|
NF F63-826-1990
|
铁路车辆.导体和无卤化物电缆
|
(RAILWAY ROLLING STOCK. HALOGEN FREE ELECTRICAL CONDUCTORS AND CABLES.)
|
NF F64-018-1990
|
铁路车辆.蓄电池.镍镉开路充电电池
|
(Railway rolling stock. Electric accumulators. Vented nickel-cadmium secondary single cells.)
|
NF F64-328-1991
|
铁路车辆.铁路机车.铅酸蓄电池
|
(RAILWAY ROLLING STOCK. LEAD ACID BATTERIES.)
|
NF F64-330-1993
|
铁路车辆.电子储存装置结构
|
(RAILWAY ROLLING STOCK. ELECTRIC ACCUMULATOR FRAME.)
|
NF F65-101-1991
|
铁路车辆.辅助旋转电机.技术布局
|
(Railway rolling stock. Auxiliary rotating machines. Technologic dispositions.)
|
NF F65-200-1993
|
铁路车辆.牵引电机.设计规范
|
(RAILWAY ROLLING STOCK. TRACTION MOTORS. DESIGN SPECIFICATIONS.)
|
NF F65-349-1-2000
|
电气牵引.铁路和道路车辆用旋转电机.第1部分:非电子交换回馈交变电流马达机
|
(Electrical traction - Rotating electrical machines for rail and road vehicules - Part 1 : machines other than electronic convertor-fed alternating current motors.)
|
NF F65-349-1/A1-2003
|
电力牵引.铁路与道路车辆用旋转电机.第1部分:除电子变流器供电的交流电动机之外的旋转电机
|
(Electric traction - Rotating electrical machines for rail and road vehicles - Part 1 : machines other than electronic convertor-fed alternating current motors.)
|
NF F65-377-1999
|
电力牵引.铁路车辆.反向供电交流电动机及其控制的联合检验
|
(Electric traction - Rolling stock - Combined testing of inverter-fed alternating current motors and their control.)
|
NF F65-377-2-2003
|
铁路设施.机车车辆.联合试验.第2部分:斩波直流牵引电动机及其控制设备
|
(Railway applications - Rolling stock - Combined testing - Part 2 : chopper-fed direct current traction motors and their control.)
|
NF F65-377-3-2003
|
铁路设施.机车车辆.第3部分:间接变流器供电的交流电动机及其他控制系统的组合检验
|
(Railway applications - Rolling stock - Part 3 : combined testing of alternating current motors, fed by an indirect convertor, and their control system.)
|
NF F66-077-1-2002
|
铁路设施.车辆电气设备.第1部分:一般应用条件和规则
|
(Railway applications - Electric equipment for rolling stock - Part 1 : general service conditions and general rules.)
|
NF F66-077-2-2002
|
铁路设施.车辆电气设备.第2部分:电工元件.一般规则
|
(Railway applications - Electric equipment for rolling stock - Part 2 : electrotechnical components - General rules.)
|
NF F66-077-3-2002
|
铁路设施.车辆用电气设备.第3部分:直流断路器规则
|
(Railway applications - Electric equipment for rolling stock - Part 3 : rules for DC circuit-breakers.)
|
NF F66-077-4-2003
|
铁路设施.机车车辆用电气设备.第4部分:电工元件.交流断路器规则
|
(Railway applications - Electric equipment for rolling stock - Part 4 : electrotechnical components - Rules for AC circuit-breakers.)
|
NF F66-101-1990
|
铁路车辆.变压器和浸没牵引电感.技术规范
|
(RAILWAY ROLLING STOCK. IMMERSED TRACTION TRANSFORMERS AND REACTORS. TECHNOLOGICAL PROVISIONS.)
|
NF F67-001-0-1990
|
铁路车辆.车上的电子和微处理机 .导言
|
(Railway rolling stock. Inborne electronic and microprocessor equipment. Introduction.)
|
NF F67-001-1-1990
|
铁路车辆.车上的电子设备和微处理机.第1部分:环境设计和使用的一般条件
|
(Railway rolling stock. Inborne electronic and microprocessor. Part 1 : general environnemental, design and user conditions.)
|
NF F67-001-2-1990
|
铁路机车.车上的电子设备和微处理机.第2部分:制造
|
(Railway rolling stock. Inborne electronic and microprocessor equipment. Part 2 : construction (mounting, cabling, marking).)
|
NF F67-001-4-1990
|
铁路车辆.车上的电子设备和微处理机.第4部分:零件
|
(Railway rolling stock. Electronic and microprocessor equipment. Part 4 : components.)
|
NF F67-001-5-1991
|
铁路车辆.电子和微处理机设备.第5部分:试验
|
(Railway rolling stock. Inborne electronic and microprocessor equipment. Part 5 : tests.)
|
NF F67-001-6-1992
|
铁路车辆.车载电子和微处理机设备.第6部分:可靠性、可维护性、有效性、可测试性
|
(Railway rolling stock. Inborne electronic and microprocessor equipment. Part 6 : reliability. Maintenability. Availability. Testability.)
|
NF F67-010-1989
|
铁路车辆.电子设备术语.与合同及设备的组成部分有关的术语
|
(Rolling stock. Terminology of electronic equipment for rolling stock. Terms related to contracts and mechanical constitution of equipments.)
|
NF F67-155-2001
|
铁路设施.轨道车辆上的电子装置
|
(Railway appliances - Electronic equipment used on rolling stock.)
|
NF F67-155/A1-2003
|
铁路设施.机车车辆用电子设备
|
(Railway applications - Electronic equipment used on rolling stock.)
|
NF F69-010-1992
|
铁路车辆.数据处理.定向串行异步传输程序形式“定向”
|
(RAILWAY ROLLING STOCK. DATA PROCESSING. DIRECTIONNAL SERIAL ASYNCHONUS TRANSMISSION PROCEDURE TYPE “PONT TO POINT“.)
|
NF F70-010-1996
|
铁路固定设备和车辆.铁路安全电子设备.安全装置的展示程序
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. RAILWAY SAFETY ELECTRONIC EQUIPMENT. PROCEDURE FOR DEMONSTRATION OF SAFETY UNIT.)
|
NF F71-004-1991
|
铁路车辆和固定设备.数据处理.微处理设备和有关文件的方法论研究
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. DATA PROCESSING. DATA MICROPROCESSING EQUIPMENTS DEVELOPMENT METHOD AND ASSOCIATED DOCUMENTATION.)
|
NF F71-011-1990
|
铁路车辆和固定设备.信息.软件的安全性.概论
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. DATA PROCESSING. SOFTWARE DEPENDABILITY. GENERALITIES.)
|
NF F71-012-1990
|
铁路车辆和固定设备.信息.软件的安全.软件的作用
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. DATA PROCESSING. SOFTWARE DEPENDABILITY,STRESSES ON SOFTWARE.)
|
NF F71-013-1990
|
铁路车辆和固定设备.信息.软件的安全性.用于软件安全分析的方法
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. DATA PROCESSING. SOFTWARE DEPENDABILITY. ADAPTED METHODS FOR SOFTWARES SAFETY ANALYSIS.)
|
NF F73-011-1992
|
铁路固定设备和铁路车辆.带L制式无线电地面/流动发射出的电视设备
|
(FIXED EQUIPMENT AND ROLLING STOCK OF RAILWAYS. EQUIPMENT OF TELEVISION WITH TRANSMISSION RADIO GROUND/MOBILE.)
|
NF F74-001-1-1992
|
铁路固定设备和车辆.电子和微处理器信号和辅助驾驶设备.第1部分:一般的环境,设计和使用要求
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTRONIC AND MICROPROCESSOR SIGNALLING AND DRIVER-AID EQUIPMENT. PART 1 : GENERAL ENVIRONMENTAL, DESIGN AND USER CONDITIONS.)
|
NF F74-001-2-1992
|
铁路固定设备和车辆.电子和微处理器信号和辅助驾驶设备.第2部分:结构(安装,电缆和标志)
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTRONIC AND MICROPROCESSOR SIGNALLING AND AID EQUIPMENT. PART 2 : CONSTRUCTION (MOUNTING, CABLING, MARKING).)
|
NF F74-101-0-1993
|
铁路固定设备和车辆.安全铺设电缆和连接.第0部分:通则
|
(RAILWAY FIXED EQUIPMENTS AND ROLLING STOCK. SAFETY CABLE WORK AND CONNECTION. PART 0 : GENERAL.)
|
NF F74-101-1-1993
|
铁路固定设备和车辆.安全铺设电缆和连接.第1部分:安全标准
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 1 : SAFE CRITERION.)
|
NF F74-101-2-1995
|
铁路固定设备和车辆.安全铺设电缆和连接.第2部分:技术和技术选择.环境标准.导则
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 2 : TECHNIQUE AND TECHNOLOGY CHOICES. ENVIRONMENT CRITERION. GUIDE.)
|
NF F74-101-3-1996
|
铁路固定设备和车辆.安全铺设电缆和连接.第3部分:工厂制作.工厂和现场质量监测.位置固定.可维修性标准.导则
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 3 : MAKING IN FACTORY - QUALITY SUPERVISING IN FACTORY AND ON PLACE. SETTING UP IN POSITION. MAINTENABILITY CRITERION. GUIDE.)
|
NF F74-101-4-1993
|
铁路固定设备和车辆.安全铺设电缆和连接.第4部分:机械标准
|
(RAILWAY FIXED EQUIPMENTS AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 4 : MECHANICAL CRITERION.)
|
NF F74-101-5-1993
|
铁路固定设备和车辆.安全铺设电缆和连接.第5部分:电气标准
|
(RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. SAFETY CABLEWORK AND CONNECTION. PART 5 : ELECTRICAL CRITERION.)
|
NF F78-001-1969
|
铁路运输器材.F 78运营专用工具索具.桶和客车用楔
|
(RAILWAY TRANSPORT EQUIPMENT. GENERAL TACKLE. CHOCKS FOR BARRELS AND VEHICLES.)
|
NF F80-101-1988
|
铁路车辆.F 80钢铁产品和半成品制造铁路车辆推荐使用的钢材.I·一般规定
|
(ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. I. COMMON REQUIREMENTS.)
|
NF F80-102-1988
|
铁路车辆.制造铁路车辆推荐使用的钢材.II.一般用结构钢
|
(ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. II. STRUCTURAL STEELS FOR GENERAL PURPOSES.)
|
NF F80-103-1989
|
铁路车辆.铁路车辆制造推荐使用的钢材.Ⅲ.抗大气腐蚀的结构钢材
|
(ROLLING STOCK. RECOMMENDED STEELS FOR ROLLING STOCK CONSTRUCTION. III. STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE. COPPER STEELS.)
|
NF F80-104-1981
|
铁路运输设备.制造铁路车辆推荐使用的钢材.IV. 制造高张力机具和压缩气贮器的碳钢和锰碳钢
|
(RAILWAY TRANSPORT EQUIPMENT. RECOMMENDED STEELS FOR RAILWAY ROLLING-STOCK CONSTRUCTION. IV : STEELS FOR PLATES FOR PRESSURE VESSELS AND HIGHLY STRESSED PARTS.)
|
NF F80-105-1982
|
铁路运输设备.制造铁路车辆推荐使用的钢材.V.适于热处理的锻制非合金钢
|
(Railway transport equipment. Recommended steels for railway rolling-stock construction. V : unalloyed forging steels suitable for heat treatment.)
|
NF F80-106-1986
|
铁路车辆.制造铁路车辆推荐使用的钢材.VI. 冷加工钢材
|
(Rolling stock. Recommended steels for rolling stock construction. VI cold forming steels.)
|
NF F80-107-1984
|
铁路车辆.制造铁路车辆推荐使用的钢材.VII.热处理非合金钢和特种合金钢
|
(Rolling stock. Recommended steels for stock construction. VII unalloyed and alloy heat treated steels.)
|
NF F80-108-1980
|
铁路运输设备.制造铁路车辆推荐使用的钢材.VIII. 弹簧钢
|
(RAILWAY TRANSPORT EQUIPMENT. RECOMMENDED STEELS FOR RAILWAY ROLLING-STOCK CONSTRUCTION. VIII : SPRING STEELS.)
|
NF F80-109-1984
|
铁路车辆.制造铁路车辆推荐使用的钢材.IY. 一般不锈钢
|
(Rolling stock. Recommanded steels for rolling stock construction. IX stainless steels for general purposes.)
|
NF F80-200-1988
|
铁路车辆.车辆流体管路用金属管.材料和尺寸.选择
|
(ROLLING STOCK. TUBES FOR FLUID PIPES. MATERIALS AND SIZES. SELECTION.)
|
NF F82-001-1990
|
铁路车辆.车体框架用的可焊接铝合金线材
|
(RAILWAY ROLLING STOCK. EXTRUDED WELDABLE PRODUCTS IN ALUMINIUM ALLOY FOR BODYWORK.)
|
NF F85-011-1991
|
铁路固定设备.车站的设备.电子式行李寄存柜
|
(FIXED RAILWAY EQUIPMENT. STATION EQUIMENT. ELECTRONIC LEFT LUGGAGE LOCKERS.)
|
NF G36-034-2-2001
|
道路车辆上的负载限制组件.安全性.第2部分:由人造纤维生产的织网绳
|
(Load restraint assemblies on road vehicles - Safety - Part 2 : web lashing made from man-made fibres.)
|
NF G36-034-3-2001
|
道路车辆上的装载物固定装置.安全.第3部分:捆绑链
|
(Load restraint assemblies on road vehicles - Safety - Part 3 : lashing chains.)
|
NF H00-013-1971
|
包装.总则.地面运输车辆中新鲜水果和蔬菜平行六面体包装的排列方法
|
(PACKAGING. GENERAL. ARRANGEMENT OF PARALLELEPIPEDIC PACKAGES OF FRESH FRUITS AND VEGETABLES IN LAND TRANSPORT VEHICLES.)
|
NF H31-366-1987
|
金属包装.卡车用可套装的、嵌接截锥形桶
|
(METAL PACKAGING. TRUNCATED PAILS. NESTING AND STACKING TYPE CALLED “CAMIONS“)
|
NF H50-510-1-1998
|
蓝式手推车.第1部分:有或无带孩子功能的蓝式手推车的要求和试验
|
(Basket trolleys. Part 1 : requirements and tests for basket trolleys with or without a child carrying facility.)
|
NF H90-202-1992
|
C组可换用的车箱.尺寸和一般要求
|
(Swap bodies. Swap bodies of class C. Dimension and general requirements.)
|
NF H90-210-2000
|
道路车辆上货物的安全性.货物运输用商业车辆的无极绳挂点.最低要求和试验
|
(Securing of cargo on road vehicles - Lashing points on commercial vehicles for goods transportation - Minimum requirements and testing.)
|
NF H90-212-2002
|
道路车辆上货物的安全.商用车辆的车体结构.最低要求
|
(Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements.)
|
NF H96-002-1983
|
自动装卸车.词汇
|
(INDUSTRIAL TRUCKS. VOCABULARY OF POWERED TRUCKS.)
|
NF H96-003-1974
|
装卸车.操作平台.术语
|
(INDUSTRIAL TRUCKS-SAFETY ASPECTS.CONCERNING OPERATING AREAS.)
|
NF H96-004-1974
|
搬运拖车.术语
|
(INDUSTRIAL TRAILERS-TERMINOLOGY.)
|
NF H96-101-1973
|
装卸车.带臂升降车和工作台的尺寸
|
(INDUSTRIAL TRUCKS HAND-OPERATED ELEVATING TRUCKS AND STILLAGES PRINCIPAL DIMENSIONS.)
|
NF H96-301-2-1989
|
自动装卸车.建造一般规则及踏板形状
|
(SELF-PROPELLED INDUSTRIAL TRUCKS SIT-DOWN RIDER-CONTROLLED. RULES FOR THE CONSTRUCTION AND LAYOUT OF PEDALS. (EUROPEAN STANDARD EN 281).)
|
NF H96-302-1999
|
工业卡车的安全.达到和包括10000千克容量的自推动式卡车和带有一达到和包括20000N的拖斗的工业拖车.第十部
|
(SAFETY OF INDUSTRIAL TRUCKS. SELF-PROPELLED TRUCKS UP TO AND INCLUDING 10000 KG CAPACITY AND INDUSTRIAL TRACTORS WITH A DRAWBAR PULL UP TO AND INCLUDING 20000 N. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 1726-1).)
|
NF H96-303-2001
|
工业货车的安全.容量不大于10000Kg的自行式货车和拖杆拉力不大于20000N的牵引车.第2部分:带有高架操作者位
|
()
|
NF H96-310-1975
|
工业用货车.国家安全规定、规程和标准的清单
|
(INDUSTRIAL TRUCKS - LIST OF NATIONAL SAFETY REGULATIONS, CODES AND STANDARDS)
|
NF H96-311-2001
|
工业卡车的安全.测量噪音散发的试验方法
|
(Safety of industrial trucks - Test methods for measuring noise emissions.)
|
NF H96-313-2002
|
工业载重汽车的安全.测量振动用试验方法
|
(Safety of industrial trucks - Test methods for measuring vibration.)
|
NF H96-315-2000
|
工业卡车.电磁兼容性
|
(Industrial trucks - Electromagnetic compatibility.)
|
NF H96-330-1-1998
|
自动装卸车安全.电气要求.第1部分:电池驱动卡车的一般要求
|
(SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 1 : GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS. (EUROPEAN STANDARD EN 1175-1).)
|
NF H96-330-2-1998
|
自动装卸车安全.电气要求.第2部分:内燃机驱动的卡车的一般要求
|
(SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 2 : GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS. (EUROPEAN STANDARD EN 1175-2).)
|
NF H96-330-3-1998
|
自动装卸车安全.电气要求.第3部分:内燃机驱动的卡车的电动传输系统特殊要求
|
(SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 3 : SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS. (EUROPEAN STANDARD EN 1175-3).)
|
NF H96-332-1997
|
工业卡车的安全.卡车上自动化功能件的补充要求
|
(SAFETY OF INDUSTRIAL TRUCKS. ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS. (EUROPEAN STANDARD EN 1526).)
|
NF H96-333-2000
|
工业卡车的安全.10000KG以上的自推式卡车
|
(Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity.)
|
NF H96-334-2000
|
工业卡车的安全.潜在爆炸环境中的操作.用于可燃气体,蒸汽潮气和灰尘
|
(Safety of Industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust.)
|
NF H96-335-1-2001
|
工业货车安全.脚踏货车.第1部分:叉车
|
(Safety of industrial trucks - Pedestrian propelled trucks - Part 1 : stacker trucks.)
|
NF H96-335-2-2001
|
工业货车安全.脚踏货车.第2部分:托盘货车
|
(Safety of industrial trucks - Pedestrian propelled trucks - Part 2 : pallet trucks.)
|
NF H96-335-3-2003
|
工业货车的安全.可以在侧面步行操纵的手推车和半手动运货车.第3部分:平板式载重车
|
(Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3 : platform trucks.)
|
NF H96-335-4-2003
|
工业货车安全.脚踏货车.剪式自动装卸码垛货车
|
(Safety of industrial trucks - Pedestrian propelled trucks - Part 4 : scissor lift pallet-trucks.)
|
NF H96-403-1996
|
叉式起重车.钩接式叉臂.词汇
|
(Fork-lift trucks. Hook-on type fork arms. Vocabulary.)
|
NF H96-404-1977
|
装卸车.叉车.榫接式实心叉臂.尺寸
|
(FORK LIFT TRUCKS. HOOK-ON TYPE FORK ARMS. DIMENSIONS.)
|
NF H96-406-1996
|
叉车.钩接式叉臂和叉臂托架.安装尺寸
|
(Fork-lift trucks. Hook-on type fork arms and fork arm carriages. Mounting dimensions.)
|
NF H96-407-1996
|
工业运载汽车.叉式起重机设备叉杆的修理和检验
|
(Industrial trucks. Inspection and repair of fork arms in service on fork-lift trucks.)
|
NF H96-601-1998
|
小脚轮和车轮.词汇.推荐符号和多语词典.(欧洲标准EN 12526)
|
(Castors and wheels. Vocabulary, recommended symbols and multilingual dictionary.)
|
NF H96-606-1975
|
工业用货车滚动面.分类
|
(ROLLING SURFACES FOR INDUSTRIAL TRUCKS. CLASSIFICATION.)
|
NF H96-610-1998
|
小脚轮和车轮.试验方法和装置(欧洲标准EN 12527)
|
(Castors and wheels. Test methods and apparatus.)
|
NF H96-611-1998
|
小脚轮和车轮.家具用小角轮.要求.(欧洲标准EN 12528)
|
(Castors and wheels. Castors for furniture. Requirements.)
|
NF H96-612-1998
|
小脚轮和车轮.家具用小角轮.转椅用小角轮.要求.(欧洲标准EN 12529)
|
(Castors and wheels. Castors for furniture. Castors for swivel chairs. Requirements.)
|
NF H96-613-1998
|
小脚轮和车轮.手工推动装置的小脚轮和轮子.(欧洲标准EN 12530)
|
(Castors and wheels. Castors and wheels for manually propelled institutional applications.)
|
NF H96-614-1998
|
小脚轮和车轮.医院用轮床(欧洲标准EN 12531)
|
(Castors and wheels. Hospital bed castors.)
|
NF H96-615-1998
|
小脚轮和车轮.1,1M/S(4KM/H)装置的轮和小角轮(欧洲标准EN 12532)
|
(Castors and wheels. Castors and wheels for applications up to 1,1 m/s (4 km/h).)
|
NF H96-616-1998
|
小脚轮和车轮.大于1,1M/S(4KM/H)达到4,4M/S(16KM/H)装置的轮和小角轮(欧洲标准EN 12533)
|
(Castors and wheels. Castors and wheels for applications over 1 ,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h).)
|
NF J31-156-2003
|
船舶和海运技术.可通过内燃机车辆的货舱舱位之间的通风量.所需总气流流量的理论计算
|
(Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required.)
|
NF J39-010-1984
|
车辆渡轮.空载和重载车辆的装运.一般规范
|
(Ro/ro ships. Stowage of laden commercial vehicles. General requirements.)
|
NF J39-020-1985
|
造船工业.车辆渡轮和陆地的连接.有平滑滑道的船头、船尾的渡船与码头间的连接装置
|
(Shipbuilding. Roll on/roll off ship-to-shore connection. Interface between terminals and ships with straight stern/bow ramps.)
|
NF J52-216-1997
|
造船.拖网绞车
|
(Shipbuilding. Trawl winches.)
|
NF J95-046-4-2002
|
小艇.船体结构和建材尺寸.第4部分:车间和制造
|
(Small craft - Hull construction and scantlings - Part 4 : workshop and manufacturing.)
|
NF L91-002-2-2003
|
航空器地面保障设备.特殊要求.第2部分:膳食供应车
|
(Aircraft ground support equipment - Specific requirements - Part 2 : catering vehicles.)
|
NF M15-015-1999
|
汽车燃料.非含铅汽油.要求和试验方法(欧洲标准EN 228)
|
(AUTOMOTIVE FUELS. UNLEADEDPETROL. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 228).)
|
NF M15-021-2002
|
燃料.机动车用柴油.水-柴油乳胶液(WDE)特性
|
(Fuels - Automotive fuels-Diesels - Characteristics of water-in-diesel fuel emulsions (WDE).)
|
NF M15-024-1999
|
汽车燃料.柴油.要求和试验方法(欧洲标准EN 590)
|
(AUTOMOTIVE FUELS. DIESEL. REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 590).)
|
NF M40-005-2000
|
机动车燃料.液化石油气.要求和试验方法
|
(Automotive fuels - LPG - Requirements and test methods.)
|
NF M60-003-2000
|
压缩天然气车辆操作
|
(Compressed natural gas vehicle operations.)
|
NF M88-070-1968
|
道路油罐车.接地钳
|
(ROAD TANKERS. EARTHING CLIP.)
|
NF M88-071-1968
|
道路油罐车.接地端子
|
(ROAD TANKERS. EARTHING TERMINALS.)
|
NF M88-072-1983
|
运输和装卸.未冷冻压力溶解液化气道路罐车.下部装卸装置
|
(Transport and materials handling. Road tankers for non-refrigerated liquefied and dissolved gas under pressure. Floor filling and draining devices.)
|
NF M88-076-1974
|
道路罐车.液态氯和二氧化硫道路油罐.最大压强为14.5bar从上部装卸的装置
|
(ROAD TANKERS. ROAD TANKERS CONTAINING LIQUEFIED CHLORINE AND SULPHUR DIOXYDE. DEVICES FOR FILLING AND EMPTYING AT THE TOP,FOR A MAXIMUM SERVICE PRESSURE OF 14.5 BAR.)
|
NF M88-080-1984
|
道路油罐车.液态化学产品金属油罐.压力排放装置:管状柱塞,进气孔
|
(ROAD TANKER VEHICLES. METALLIC TANKERS FOR LIQUID CHEMICAL PRODUCTS. DEVICES EFFECTING DISCHARGE BY MEANS OF PRESSURE : PLUNGER TUBE,AIR OFF-TAKE.)
|
NF M88-081-1974
|
道路油罐车.液态化学产品金属油罐.排放装置.快速接头
|
(ROAD TANKERS. METAL TANKERS FOR LIQUID CHEMICAL PRODUCTS. DISCHARGE DEVICES : QUICK-ACTION COUPLINGS.)
|
NF M88-101-1985
|
罐式车箱.液态石油产品的运输.设备的位置和配置
|
(TANK WAGONS. TRANSPORT OF LIQUID HYDROCARBONS. LOCATION AND LAYOUT OF EQUIPMENT.)
|
NF M88-114-1982
|
罐车.液化气运输.4-40ba工作压力的DN50.DN80和DN100的止流和安全内部阀门
|
(ROAD TANKERS. TRANSPORTATION OF LIQUEFIED GASES. INTERNAL STOP AND SAFETY OBTURATOR. NOMINAL DIAMETERS DN 50,DN 80 AND DN 100 FOR SERVICE PRESSURE BETWEEN 4 BAR AND 40 BAR.)
|
NF M88-127-2003
|
危险物品运输用槽罐车.槽罐车用辅助设备.无压平衡底阀
|
(Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve.)
|
NF M88-128-2003
|
危险物品运输用槽罐车.槽罐车的辅助设备.装填孔的封盖
|
(Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover.)
|
NF M88-131-2003
|
危险物品运输用槽罐车.槽罐车用辅助设备.压力平衡底阀
|
(Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve.)
|
NF M88-132-2003
|
危险物品运输用槽罐车.槽罐车的辅助设备.人孔封盖组件
|
(Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly.)
|
NF M88-141-2003
|
危险物品运输用槽罐车.槽罐车用辅助设备.液体燃料用防溢流装置
|
(Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels.)
|
NF M88-250-1983
|
石油工业.油罐车和可动油罐容量鉴定牌
|
(Petroleum industry. Calibration identification plate for tankers and removable tank cradles.)
|
NF M88-261-1974
|
石油产品的运输和装卸.丙烷丁烷道路罐车散装注入的固定装置
|
(TRANSPORT AND HANDLING OF PETROLEUM PRODUCTS - FIXED POSITIONS FOR TOP LOADING IN BULK OF ROAD TANKERS WITH BUTANE AND PROPANE.)
|
NF M88-262-1978
|
道路罐车.油罐车.油船.非冷冻液态烃的运输.橡胶软管
|
(ROAD TANKERS. TANK WAGONS. TANKERS. TRANSFER OF NON-REFRIGERATED LIQUEFIED HYDROCARBONS. RUBBER HOSE PIPES.)
|
NF M88-302-1976
|
增强塑料制公路油罐车.设计用符号
|
(ROAD TANKERS IN REINFORCED PLASTIC. SYMBOLS USED FOR DESIGN.)
|
NF M88-310-1976
|
增强塑料制公路油罐车.技术数据单式样
|
(ROAD TANKERS OF REINFORCED PLASTIC MATERIALS. MODELS FOR TECHNICAL DATA SHEETS.)
|
NF M88-715-2001
|
液化石油气(LPG)槽罐车的装备
|
(Equipping of Liquefied Petroleum Gas (LPG) road tankers.)
|
NF M88-716-2002
|
液化石油气(LPG)用焊接钢罐.槽罐车.设计和生产
|
(Welded steel tanks for liquefied petroleum gas (LPG) - Road tankers - Design and manufacture.)
|
NF M88-718-2003
|
汽车用液化石油汽的化学成分.容器
|
(Automotive LPG components - Containers.)
|
NF M88-719-2003
|
汽车用液化石油气部件.容器除外
|
(Automotive liquefied petroleum gas components - Other than containers.)
|
NF M88-732-2002
|
液化石油气槽罐车的灌装和卸料程序
|
(Filling and discharge procedures for LPG road tankers.)
|
NF M88-735-2002
|
汽车用液化石油气系统用户使用说明书内容的最低要求
|
(Minimum requirements for the content of the user manual for automotive LPG systems.)
|
NF P07-002-1949
|
特定尺寸.卡车和火车车厢装卸月台高度
|
(SPECIAL DIMENSIONS. HEIGHT OF LOADING PLATFORMS FOR LORRIES AND WAGONS.)
|
NF P16-340-2003
|
车辆和行人区的排水通道.分类、设计、试验要求、标记和合格评定
|
(Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity.)
|
NF P22-615-1978
|
桥式活动吊车转动梁.工作变形和公差
|
(METAL CONSTRUCTION. ROLLING BEAMS FOR OVERHEAD CRANES. DEFORMATIONS IN OPERATION AND TOLERANCES.)
|
NF P25-302-2000
|
工业,商业和车库门.对风负载的抗性.分级
|
(Industrial, commercial and garage doors and gates - Resistance to wind load - Classification.)
|
NF P25-303-2000
|
工业,商业和车库门.对水渗透的抗性.分级
|
(Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification.)
|
NF P25-304-2000
|
工业,商业和车库门.空气渗透性.分级
|
(Industrial, commercial and garage doors and gates - Air permeability - Classification.)
|
NF P25-305-2000
|
工业,商业和车库门.空气渗透性.试验方法
|
(Industrial, commercial and garage doors and gates - Air permeability - Test method.)
|
NF P25-306-2000
|
工业,商业和车库门.热传输性.计算要求
|
(Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation.)
|
NF P25-307-1999
|
工业、商业和车库用门.术语.第1部分:门的类型
|
(Industrial, commercial and garage doors and gates - Terminology - Part 1 : types of doors.)
|
NF P25-308-1999
|
工业、商业和车库用门.术语.第2部分:门的部件
|
(Industrial, commercial and garage doors and gates - Terminology - Part 2 : parts of doors.)
|
NF P25-309-2001
|
工业、商业和车库用门和大门.防风.试验和计算
|
(Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation.)
|
NF P25-310-2001
|
工业、商业和车库用门和大门.动力门的使用安全.要求
|
(Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements.)
|
NF P25-311-2001
|
工业,商业和车库门.使用动力操作门时的安全性.试验方法
|
(Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods.)
|
NF P25-312-2000
|
工业,商业和车库门.对渗水性的耐性.试验方法
|
(Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method.)
|
NF P25-314-2001
|
工业,商业和车库门.机械方面.要求
|
(Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements.)
|
NF P25-315-2001
|
工业,商业和车库门.机械方面.试验方法
|
(Industrial, commercial and garage doors and gates - Mechanical aspects - Test methods.)
|
NF P25-318-2002
|
工业、商业和车库门的安装和使用
|
(Industrial, commercial and garage doors and gates - Installation and use.)
|
NF P25-319-2003
|
工业、商业和车库用门.电动门的安全装置.要求和试验方法
|
(Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods.)
|
NF P91-100-1994
|
公共停车场.功能标准.设计及尺寸
|
(PUBLIC CAR-PARKS. CRITERIA FOR FUNCTIONAL CAPABILITY. DESIGN AND DIMENSIONS.)
|
NF P91-120-1996
|
建筑尺寸.私人停车场.停车区及车道的最低尺寸
|
(DIMENSIONS OF THE CONSTRUCTIONS. PRIVATE CAR PARKS. MINIMUM DIMENSIONS OF THE PARKING LOTS AND LANES.)
|
NF P98-132-2000
|
沥青路面.行车路面层和底层.薄层沥青混凝土.定义.分类.特性.生产.铺设
|
(Asphalt - Wearing course and base courses : thin layer asphalt concrete - Definition - Classification - Characteristics - Manufacturing- Laying.)
|
NF P98-134-2000
|
沥青混合料.行车路面层:多孔沥青.定义.分类.特性.生产.铺设
|
(Bituminous mixes - Wearing courses : porous asphalts - Definition - Classification - Characteristics - Manufacturing - Laying.)
|
NF P98-145-1992
|
沥青路面.人行便道用和公路车行道的沥青膏.定义.分类.特性,生产.使用
|
(BITUMINOUS MIXES. MASTIC ASPHALTS FOR FOOTWAYS AND PAVEMENT WEARING COURSES. DEFINITIONS. CLASSIFICATION. CHARACTERISTICS. FABRICATION. LAYING.)
|
NF P98-200-1-1991
|
路面试验.行车荷载面形成的弯曲测定.第1部分:定义、测量方法、特性评估
|
(ROAD TESTING. MEASUREMENT OF A ROLLING LOAD DEFLECTION. PART 1 : DEFINITIONS,MEASUREMENTS,SPECIFIC VALUES.)
|
NF P98-200-5-1993
|
路面试验.行车荷载偏转的测定.第5部分:使用偏转图04对偏转值的测定
|
(ROAD TESTING. MEASUREMENT OF A ROLLING LOAD DEFLECTION. PART 5 : DETERMINATION OF DEFLECTION VALUES USING DEFLECTOGRAPH 04.)
|
NF P98-311-1994
|
机动车辆和行人通过区域的水沟顶部和人孔顶部的设计要求.试验类型、标志和质量控制
|
(Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control.)
|
NF P98-791-2001
|
道路维护设备和产品.适用于洒盐机和扫雪车的液压驱动装置.特性和规范
|
(Road maintenance equipment and products - Hydraulic drive device adapted into salt speader and snow clearing blade carrying vehicles - Characteristics and specifications.)
|
NF P99-305-2003
|
道路交通数据.详尽描述、存储和传播.可变感应电磁环路车辆探测装置和探测器.定义、特征和性能
|
(Road traffic data - Elaboration, storage, spreading - Variable inductance electromagnetic loop vehicle detection units and detectors - Definitions, characteristics and performances.)
|
NF P99-400-1994
|
车上设备.驾驶员控制板.最小尺寸和功能规范
|
(BUS AND COASCH ON-BOARD EQUIPMENT. DRIVER`S CONTROL CONSOLE. MINIMUM DIMENSIONAL AND FUNCTIONAL CHARACTERISTICS.)
|
NF P99-450-1993
|
停车时间控制仪.记时打印机:功能及技术特性
|
(PARK TIME MONITORING APPARATUS. TIME STAMPS : FUNCTIONAL AND TECHNICAL CHARACTERISTICS.)
|
NF P99-460-1999
|
车辆停泊控制设备.付款和售票机.技术和功能要求
|
(Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements.)
|
NF R05-010-1994
|
道路车辆.车辆牌号(VIN).内部构造
|
(Road vehicles. Vehicles identification number (vin). Content and structure.)
|
NF R05-011-1994
|
道路车辆.制造商(WMI)识别码
|
(Road vehicles. World manufacturer identifier (wmi) code.)
|
NF R05-012-1994
|
道路车辆.车辆牌号(VIN).定位和固定
|
(Road vehicles. Vehicles identiication number (vin). Location and attachment.)
|
NF R10-003-1988
|
道路车辆.运输汽车的轴荷重分布
|
(Road vehicles. Distribution of loads on the axles of commercial vehicles. Method of calculation.)
|
NF R10-005-1991
|
道路车辆.重量.词汇和代码
|
(Road vehicles. Masses. Vocabulary and codes.)
|
NF R10-007-1990
|
道路车辆.车辆动态和抓地能力.词汇
|
(Road vehicles. Vehicle dynamics and road holding ability. Vocabulary.)
|
NF R10-014-2002
|
道路车辆.使用压力检测计进行曲柄轴箱压力测量法
|
(Road vehicles - Crankcase pressure measurement procedure using a pressure probe.)
|
NF R10-019-2001
|
测量车辆排气的仪器
|
(Instruments for measuring vehicle exhaust emissions.)
|
NF R10-021-2000
|
道路车辆.废气系统排泄定位和设备规范
|
(Road vehicles - Localization of exhaust system leaks and equipment specifications.)
|
NF R10-024-1994
|
道路车辆.机动车道路负载.底盘功率计的复现和在参考大气条件下测定道路负载
|
(Road vehicles. Motor vehicle road load. Determination under reference atmospheric conditions and reproduction on chassis dynamometer.)
|
NF R10-025-1-1996
|
道路车辆.压燃式发动机废气阻光度的测量.第1部分:标准(参考)暗度计
|
(Road vehicles. Measurement of the opacity of exhaust gas from compression ignition (diesel) engines. Part 1 : standard (reference) opacimeter.)
|
NF R10-025-2-1996
|
道路车辆.压燃式发动机废气阻光度的测量.第2部分:局部流动商业暗度计的技术规范
|
(Road vehicles. Measurement of the opacity of exhauts gas from compression ignition (diesel) engines. Part 2 : technical specifications for partial flow commercial opacimeters.)
|
NF R10-025-3-1996
|
道路车辆.压燃式发动机废气阻光度的测量.第3部分:可见污染物的检测程序(废气的阻光度)
|
(Road vehicles. Measurement of the opacity of exhaust gas from compression ignition (diesel) engines. Part 3 : monitoring procedure of visible pollutants (opacity of exhaust gas).)
|
NF R10-025-4-1996
|
道路车辆.压燃式发动机废气阻光度的测量.第4部分:局部流动商业暗度计的检测程序
|
(Road vehicles. Measurement of the opacity of exhaust gas from compression ignition (diesel) engines. Part 4 : monitoring procedures of partial flow commercial opacimeters.)
|
NF R10-101-1971
|
汽车动态试验用模拟人
|
(ANTHROPOMORPHIC DUMMY FOR DYNAMIC TESTING OF MOTOR VEHICLES.)
|
NF R10-102-2002
|
道路车辆.H点和R点的测定程序
|
(Road vehicles - Procedure for H- and R-point determination.)
|
NF R10-105-1-2003
|
道路车辆.安全气囊元部件.第1部分:词汇
|
(Road vehicles - Airbag components - Part 1 : vocabulary.)
|
NF R10-105-2-1997
|
道路车辆.气囊组件.第2部分:气囊组件的试验
|
(Road vehicles. Airbag components. Part 2 : testing of airbag modules.)
|
NF R10-105-3-2003
|
道路车辆.安全气囊元部件.第3部分:充气机组件的检验
|
(Road vehicles - Airbag components - Part 3 : testing of inflator assemblies.)
|
NF R10-113-1999
|
道路车辆.儿童保护系统.有儿童乘客的事故报告格式
|
(Road vehicles - Child restraint systems - Report form for accidents involving child passengers.)
|
NF R10-114-1-2000
|
道路车辆.车辆中的锚固装置和儿童约束系统用锚固装置的附件.第1部分:座椅弯曲处的锚固装置和附件
|
(Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 1 : seat bight anchorages and attachments.)
|
NF R10-118-2003
|
道路车辆.交通事故分析.第1部分:词汇
|
(Road vehicles -Traffic accident analysis - Part 1 : vocabulary.)
|
NF R10-212-2004
|
道路车辆.冲击试验中的测量技术.仪器
|
(Road vehicles - Measurement techniques in impact tests - Instrumentation.)
|
NF R10-213-1989
|
道路车辆.冲撞试验的测量.光学仪器
|
(ROAD VEHICLES. MEASUREMENT TECHNIQUES IN IMPACT TEST. OPTICAL INSTRUMENTATION.)
|
NF R10-214-1999
|
道路车辆.碰撞分类.术语
|
(ROAD VEHICLES. COLLISION CLASSIFICATION. TERMINOLOGY.)
|
NF R10-215-2002
|
道路车辆.正面固定障碍物碰撞试验程序
|
(Road vehicles - Frontal fixed barrier or pole impact test procedure.)
|
NF R10-302-1991
|
道路车辆.垃圾收集车发出的空中噪声测量
|
(ROAD VEHICLES. MEASUREMENT OF AIR BORNE NOISE EMITTED BY REFUSE COLLECTION VEHICLES.)
|
NF R10-304-1994
|
道路车辆.热食品运输车辆配备的制冷设备声力级的测定.技能分类
|
(ROAD VEHICLES. DETERMINATION OF SOUND POWER LEVEL FOR REFRIGERATION UNITS FITTED TO THERMAL GOODS TRANSPORT VEHICLES. EXPERTISE CLASS.)
|
NF R10-403-2002
|
道路车辆.可循环和可恢复性.计算方法
|
(Road vehicles - Recyclability and recoverability - Calculation method.)
|
NF R11-411-1987
|
道路车辆.起动机齿轮.齿轮特性和检验
|
(ROAD VEHICLES. STARTER-GEAR SYSTEM. GEAR CHARACTERISTICS AND CONTROL.)
|
NF R11-415-1997
|
道路车辆.电动机起动器的电性能.试验方法和一般要求
|
(Road vehicles. Electrical performance of starter motors. Test methods and general requirements.)
|
NF R11-416-1989
|
轿车.起动器的电连接件.尺寸特性
|
(Passenger cars. Starter motor electrical connections. Dimensional characteristics.)
|
NF R12-204-1988
|
运输车辆和客车.变速箱法兰.A型
|
(COMMERCIAL VEHICLES AND BUSES. GEARBOX FLANGES. TYPE A.)
|
NF R12-205-1988
|
运输车辆和客车.变速箱法兰.S型
|
(COMMERCIAL VEHICLES AND BUSES. GEARBOX FLANGES. TYPE S.)
|
NF R12-401-1975
|
商用车辆.功率输出器
|
(COMMERCIAL VEHICLES - POWER TAKE-OFF)
|
NF R12-403-1987
|
运输道路车辆.货车侧向动力输出轴
|
(Commercial road vehicles. Commercial vehicles. Side openings for truck power take-offs.)
|
NF R12-605-1976
|
运输车辆鼓式制动器
|
(DRUM BRAKES FOR COMMERCIAL VEHICLES.)
|
NF R12-611-1975
|
特种车辆鼓形制动器
|
(DRUM BRAKES FOR PASSENGER CARS)
|
NF R12-612-2001
|
道路车辆.制动闸衬.压缩应变试验方法
|
(Road vehicles - Brake linings - Compressive strain test method.)
|
NF R12-613-1988
|
道路车辆.制动磨擦片.磨擦法抗剪强度.试验规程
|
(ROAD VEHICLES. BRAKE LININGS. INTERNAL SHEAR STRENGTH OF LINING MATERIAL. TEST PROCEDURE.)
|
NF R12-614-2001
|
道路车辆.制动闸衬.圆盘制动片和鼓式制动器蹄片组件的剪切试验程序
|
(Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies.)
|
NF R12-615-1988
|
道路车辆.制动磨擦片.闸瓦发热效应.试验方法
|
(ROAD VEHICLES. BRAKE LININGS. EFFECTS OF HEAT ON DIMENSIONS AND FORM OF DISC BRAKE PADS. TEST PROCEDURE.)
|
NF R12-616-1988
|
道路车辆.制动磨擦片,抗水性、抗碱溶液性、抗油脂和抗制动液性能.试验规程
|
(ROAD VEHICLES. BRAKE LININGS. RESISTANCE TO WATER,SALINE SOLUTION,OIL AND BRAKE FLUID. TEST PROCEDURE.)
|
NF R12-617-1988
|
道路车辆.制动器磨擦片.硬金属表面的粘连性试验方法
|
(ROAD VEHICLES. BRAKE LININGS. SEIZURE TO FERROUS MATING SURFACE DUE TO CORROSION. TEST PROCEDURE.)
|
NF R12-618-1997
|
道路车辆.使用非石油基液压液的液压制动系统软管组件
|
(Road vehicles. Brake hose assemblies for hydraulic braking systems used with a non-petrolum-base brake fluid.)
|
NF R12-619-1997
|
道路车辆.使用石油基液压液的液压制动系统制动软管总成
|
(Road vehicles. Brake hose assemblies for hydraulic braking systems used with a petrolum-base brake fluid.)
|
NF R12-622-1987
|
道路车辆.安装在底座上的,单汽缸三角皮带传动的空气压缩机.安装尺寸
|
(ROAD VEHICLES. BASE-MOUNTED AIR COMPRESSORS,SINGLE CYLINDER V-BELT DRIVE. MOUNTING DIMENSIONS.)
|
NF R12-634-1-1998
|
道路车辆.气动制动系统.第1部分:带平面密封面的管,阳模管配合件,螺纹孔
|
(Road vehicles. Pneumatic braking systems. Part 1 : pipes, male fittings and tapped holes with facial sealing surface.)
|
NF R12-634-2-1998
|
道路车辆.气动制动系统.第1部分:带锥形密封面的管,阳模管配合件,螺纹孔
|
(Road vehicles. Pneumatic braking systems. Part 2 : pipes, male fittings and tapped holes with conical sealing surface.)
|
NF R12-635-1987
|
道路车辆.压缩空气制动装置.仪表孔的定位
|
(ROAD VEHICLES. AIR BRAKING SYSTEMS. IDENTIFICATION OF CONNECTIONS ON UNITS.)
|
NF R12-636-1998
|
道路车辆.液压制动系统.导管、螺纹孔、外螺纹接头和软管管端接头
|
(Road vehicles. Hydraulic braking systems. Simple flare pipes, tapped holes, male fittings and hose end fittings.)
|
NF R12-639-1988
|
道路车辆.制动液类型图形符号
|
(Road vehicles. Graphical symbols to designate brake fluid types.)
|
NF R12-642-1991
|
道路车辆.液压制动器.非石油为基础的参考液体
|
(Road vehicles. Hydraulic braking systems. Non-petroleum base reference fluids.)
|
NF R12-644-1990
|
道路车辆.液压制动.ISO石油基标准液体
|
(Road vehicles. Hydraulic brake systems. ISO reference petroleum base fluid.)
|
NF R12-645-1987
|
道路车辆.使用石油基液压制动液(最高工作温度120℃)C)的鼓式闸轮液压缸用弹性O形密封圈
|
(Road vehicles. Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.).)
|
NF R12-646-1987
|
道路车辆.使用石 油基液压制动液(最高工作温度120℃)C)的液压制动系统用弹性环和密封件
|
(ROAD VEHICLES. ELASTOMERIC CUPS AND SEALS FOR CYLINDERS FOR HYDRAULIC BRAKING SYSTEMS USING A PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 DEGRES C MAX.).)
|
NF R12-647-1987
|
道路车辆.使用石油基液压制动液(最高工作温度120℃)C)的盘式制动液压缸用弹性密封件
|
(Road vehicles. Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max).)
|
NF R12-648-1987
|
道路车辆.使用石油基液压制动液(最高工作温度120℃)C)的鼓式闸轮液压缸用弹性套
|
(ROAD VEHICLES. ELASTOMERIC BOOTS FOR DRUM TYPE HYDRAULIC BRAKE WHEEL CYLINDERS USING A PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 DEGREES C MAX).)
|
NF R12-650-1984
|
道路车辆.压缩气制动设备的压力传感器
|
(Road vehicles. Pressure test connection for compressed-air pneumatic braking equipment.)
|
NF R12-651-1984
|
道路车辆,液压制动设备的压力传感器
|
(Road vehicles. Hydraulic pressure test connection for braking equipment.)
|
NF R12-652-1991
|
道路车辆.液压传动制动装置.制动性能的测定
|
(ROAD VEHICLES. HYDRAULIC BRAKING SYSTEMS. MEASUREMENT OF BRAKING PERFORMANCE.)
|
NF R12-653-1991
|
道路车辆.气压传动或液-气传动制动装置.制动性能的测定
|
(ROAD VEHICLES. AIR OR AIR OVER HYDRAULIC BRAKING SYSTEMS. MEASUREMENT OF BRAKING PERFORMANCE.)
|
NF R12-716-1993
|
载重车轮胎.第716部分:轮胎翻新的推建标准
|
(TRUCK TYRES. RECOMMENDATIONS FOR RETREADING.)
|
NF R12-743-1-2002
|
客车的轮胎和轮辋.第1部分:轮胎(米制系列)
|
(Passenger car tyres and rims - Part 1 : tyres (metric series).)
|
NF R12-744-1993
|
客车轮胎.翻新推建标准
|
(TYPES FOR PASSENGERS CARS. RECOMMENDATIONS FOR RETREADING.)
|
NF R12-775-1987
|
运输汽车车轮.轴和固定螺母
|
(ROAD VEHICLES. WHEELS FOR COMMERCIAL VEHICLES. ATTACHEMENT STUD AND NUT.)
|
NF R12-780-1989
|
公路车辆.连接辅助设备.连接尺寸
|
(ROAD VEHICLES. ADDITIONAL FOR GRIP. OVERALL DIMENSIONS.)
|
NF R12-790-1976
|
车轮、车圈.术语、名称、标记和测量单位
|
(Wheels. Rims. Nomenclature. Designation. Marking and units of measurement.)
|
NF R12-791-2-1989
|
特种汽车轮胎和轮辋
|
(Passenger car tyres and rims. Rims.)
|
NF R12-792-2-1989
|
运输车辆的轮胎网.第2部分:轮网
|
(Truck and bus tyres and rims (metric series). Part 2 : rims.)
|
NF R12-902-1987
|
道路车辆.PTAC型大于3.5t商用车辆和公共运输车辆的垫板.功能特性
|
(ROAD VEHICLES. WHEEL CHOCKS FOR COMMERCIAL VEHICLES OF MORE THAN 3,5 T OF PTAC AND BUSES. FUNCTIONAL CHARACTERISTICS.)
|
NF R13-002-1-2002
|
道路车辆.由传导和耦合引起的电干扰.第1部分:定义和总则
|
(Road vehicles - Electrical interference by conduction and coupling - Part 1 : definitions and general considerations.)
|
NF R13-002-2-1991
|
道路车辆.通过连接和耦合的电干扰.第2部分:额定24伏特供电电压的商用车辆.通过供电线和插件板网络控制线的
|
(ROAD VEHICLES. ELECTRICAL DISTURBANCE BY CONDUCTION AND COUPLING. PART 2 : COMMERCIAL VEHICLES WITH NOMINAL 24 V SUPPLY VOLTAGE. ELECTRICAL TRANSIENT CONDUCTION ALONG SUPPLY LINES AND BOARD NETWORK CONTROL LINES.)
|
NF R13-002-3-1996
|
道路车辆.电导和耦合引起的电干扰.第3部分:标称电源电压12V或24V的车辆.通过电容耦合和电感耦合经由非电源
|
(Road vehicles. Electrical disturbance by conduction and coupling. Part 3 : vehicles with nominal 12 V or 24 V supply voltage. Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines.)
|
NF R13-007-1-1999
|
道路车辆.机动车部件的电磁兼容性试验程序.第1部分:总则和定义
|
(Road vehicles - Electromagnetic compatibility test procedure of automotive components - Part 1 : definitions and generalities.)
|
NF R13-007-2-1999
|
道路车辆.机动车部件的电磁兼容性试验程序.第2部分:判定传导干扰
|
(Road vehicles - Electromagnetic compatibility test procedure of automotive components - Part 2 : qualification conduction emitted interference.)
|
NF R13-007-3-1999
|
道路车辆.机动车部件的电磁兼容性试验程序.第3部分:判定辐射干扰
|
(Road vehicles - Electromagnetic compatibility test procedure of automotive components - Part 3 : qualification radiation emitted interference.)
|
NF R13-007-5-1998
|
道路车辆.机动车零件电磁兼容性试验过程.试验5:根据吸收室过程的窄谱带分配抗性的合格性
|
(ROAD VEHICLES. ELECTROMAGNETIC COMPATIBILITY TEST PROCEDURE OF AUTOMOTIVE COMPONENTS. PART 5 : QUALIFICATION OF NARROWBAND DISTURBANCE IMMUNITY ACCORDING TO ABSORPTIVE CHAMBER PROCEDURE.)
|
NF R13-007-6-1999
|
道路车辆.机动车部件的电磁兼容性试验程序.第4部分:根据电流发射程序判定抗窄带干扰
|
(Road vehicles - Electromagnetic compatibility test procedure of automotive components - Part 6 : qualification of the immunity to narrowband interference according to the current injection procedure.)
|
NF R13-008-1-1999
|
道路车辆.摩托车电磁兼容性试验程序.第1部分:定义和总则
|
(Road vehicles - Electromagnetic compatibility test procedure of motor vehicles - Part 1 : definitions and generalities.)
|
NF R13-008-2-1999
|
道路车辆.机动车的电磁兼容性试验程序.第2部分:在半吸音室判定抗电磁干扰
|
(Road vehicles - Electromagnetic compatibility test procedure of motor vehicles - Part 2 : qualification of the immunity to electromagnetic interference in a semi-anechoic chamber.)
|
NF R13-202-1989
|
道路车辆.组合式带整流器的交流发电机.试验方法和试验的一般条件
|
(Road vehicles. Alternators with regulators. Test methods and general requirements.)
|
NF R13-203-1989
|
特种车辆和派生车辆.组合式带整流器的交流发电机.尺寸特性
|
(PASSENGER CARS AND SIMILAR VEHICLES. ALTERNATORS WITH INCORPORATED REGULATORS. DIMENSIONAL CHARACTERISTICS.)
|
NF R13-318-2002
|
道路车辆.带平座和16mm六角M14×1.25火花塞及其在汽缸盖上的座孔
|
(Road vehicles - M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings.)
|
NF R13-321-1-2003
|
道路车辆.点火系统.第1部分:词汇
|
(Road vehicles - Ignition systems - Part 1 : vocabulary.)
|
NF R13-321-2-1998
|
道路车辆.点火系统.第2部分:电气性能和功能试验
|
(Road vehicles. Ignition systems. Part 2 : electrical performance and function test methods.)
|
NF R13-323-1998
|
道路车辆.未分级的高张力点火电缆组件.一般要求和试验方法
|
(Road vehicles. Unscreened high-tension ignition cable assemblies. General requirements and test methods.)
|
NF R13-328-1986
|
道路车辆.内燃机.火花塞点火.术语
|
(ROAD VEHICLES. INTERNAL COMBUSTION ENGINES. SPARK PLUNG INGNITION. TERMINOLOGY.)
|
NF R13-330-1998
|
道路车辆.火花塞.终端
|
(ROAD VEHICLES. SPARK-PLUGS. TERMINALS.)
|
NF R13-402-1971
|
汽车用双触点微型熔断丝
|
(2 connection miniature fuses for motor vehicles.)
|
NF R13-403-1992
|
道路车辆.电连接.两孔插销.(欧洲标准 EN 24165)
|
(Road vehicles. Electrical connections. Double-pole connector.)
|
NF R13-403-2003
|
道路车辆.电气连接.双极接线盒
|
(Road vehicles - Electrical connections - Double-pole connection.)
|
NF R13-404-1990
|
道路车辆.燃油泵的电连接件
|
(Road vehicles. Fuel pump electric connections.)
|
NF R13-405-1969
|
汽车仪表盘刚性支架印制电路
|
(Printed circuits on rigid bases for vehicle control panels.)
|
NF R13-417-1992
|
道路车辆.无屏蔽高压点火电缆.第1部分:尺寸、一般要求和试验方法
|
(Road vehicles. Unscreened high-tension ignition cables. Part 1 : dimensions, general requirements and test methods.)
|
NF R13-418-1986
|
道路车辆.非铠装高压点火电缆.电缆分级、型号、试验和特殊规格
|
(Road vehicles. Unscreened high-tension ignition cables. Cable classes, types, applicable tests and special requirements.)
|
NF R13-419-1-2000
|
道路车辆.多芯连接电缆.第1部分:基本性能铠装电缆的试验方法和要求
|
(Road vehicles - Multicore connecting cables - Part 1 : test methods and requirements for basic performance sheathed cables.)
|
NF R13-419-2-2000
|
道路车辆.多芯连接电缆.第2部分:高性能铠装电缆的试验方法和要求
|
(Road vehicles - Multicore connecting cables - Part 2 : test methods and requirements for high performance sheathed cables.)
|
NF R13-419-3-2000
|
道路车辆.多芯连接电缆.第3部分:非屏蔽铠装低压电缆的制造、尺寸和标记
|
(Road vehicles - Multicore connecting cables - Part 3 : construction, dimensions and marking of unscreened sheathed low-voltage cables.)
|
NF R13-421-2003
|
道路车辆.无屏蔽高压点火电缆.总规范、试验方法和要求
|
(Road vehicles - Unscreened high-voltage ignition cables - General specifications, test methods and requirements.)
|
NF R13-425-1987
|
道路车辆.电器连接用4毫米圆柱形插头
|
(Road vehicles. Connections with 4 mm cylindrical pins. Dimensional characteristics.)
|
NF R13-433-1987
|
道路车辆.无板销钉联锁设备的连接.功能特性
|
(Road vehicles. Flat tab connections without positive locking. Functional characteristics.)
|
NF R13-437-1987
|
道路车辆.带板销钉联锁设备的连接.功能特性
|
(Road vehicles. Flat tab connections with positive locking. Functional characteristics.)
|
NF R13-439-1998
|
道路车辆.电子线路板的成组配线装置.第1部分:单极联接接头标记.尺寸与特殊要求
|
(Road vehicules. Connections for on-board electrical wiring harnesses. Part 1 : tabs for single-pole connections. Dimensions and specific requirements.)
|
NF R13-440-2-2002
|
道路车辆.车上电线束用连接.第2部分:定义、试验方法和通用性能要求
|
(Road vehicules - Connections for on-board electrical wiring harnesses - Part 2 : definitions, test methods and general performance requirements.)
|
NF R13-441-1988
|
商品运输车辆客用车辆蓄电池开关
|
(ROAD VEHICLES. ISOLATING SWITCH FOR BUSES AND COMMERCIAL VEHICLES. DIMENSIONAL CHARACTERISTICS AND FUNCTIONAL SPECIFICATIONS.)
|
NF R13-450-1992
|
道路车辆电源供电设备连接用小型耦合器
|
(Mini-couplers for the interconnection of electrical mains supplied equipment in road vehicles.)
|
NF R13-459-1998
|
道路车辆.线路板密封和非密封连接件连接界面.总则
|
(Road vehicles. Connection interface for on-board sealed and unsealed connectors. General.)
|
NF R13-462-2001
|
道路车辆.车装防水连接器用连接接口.0.64mm和/或1.5mm四列连接器
|
(Road vehicles - Connection interface for on-board waterproof connectors - Connectors with four rows of 0,64 mm and/or 1,5 mm.)
|
NF R13-480-1999
|
道路车辆.非密封机载连接器用连接界面.1.5MM和/或2.8MM一栈接触连接器
|
(ROAD VEHICLES. CONNECTION INTERFACE FOR UNSEALED ON-BOARD CONNECTORS. CATEGORY 1,5 MM AND/OR 2,8 MM ONE STACK CONTACT CONNECTORS.)
|
NF R13-483-2002
|
道路车辆.点火装置用的连接器.点火装置和梁式连接器之间的连接接口
|
(Road vehicles - Connectors for pyrotechnic devices - Connection interface between pyrotechnic device and the beam connector.)
|
NF R13-50311-1996
|
特种车辆和轻型运输车辆起动用铅蓄电池
|
()
|
NF R13-507-1993
|
铅酸起动电池组.第4部分:重型商用车辆用蓄电池组的尺寸
|
(Lead-acid starter batteries. Part 4 : dimensions of batteries for heavy commerical vehicles.)
|
NF R13-510-1988
|
道路车辆.铅蓄电池电流开关
|
(ROAD VEHICLES. ACCUMULATOR BATTERY SWITCH. OVERALL DIMENSIONS AND DRILLING CHARACTERISTICS.)
|
NF R13-623-1990
|
道路车辆.前小灯探照灯方向校正装置
|
(ROAD VEHICLES. LEVELLING DEVICES FOR HEADLAMP DIPPED BEAM.)
|
NF R13-624-1990
|
道路车辆.专用示警灯.尺寸
|
(ROAD VEHICLES. SPECIAL WARNING LAMPS. DIMENSIONS.)
|
NF R13-625-1990
|
道路车辆.机动车辆及其挂车的灯光和灯光信号设备
|
(ROAD VEHICLES. INSTALLATION OF LIGHTING AND LIGHT SIGNALLING DEVICES FOR MOTOR VEHICLES AND THEIR TRAILERS.)
|
NF R13-626-1989
|
道路车辆.照明系统和灯光指示装置.词汇
|
(ROAD VEHICLES. LIGHTING AND LIGHT SIGNALLING DEVICES. VOCABULARY.)
|
NF R13-629-1997
|
道路车辆用白炽灯.尺寸.电气和照明要求
|
(Filament lamps for road vehicles. Dimensional, electrical and luminous requirements.)
|
NF R13-629/A2-2002
|
道路车辆用照明灯.尺寸.电气和照明要求
|
(Lamps for road vehicles - Dimensional, electrical and luminous requirements.)
|
NF R13-6291-1998
|
道路车辆用灯.尺寸.电气和照明要求
|
()
|
NF R13-630-1995
|
道路车辆灯.性能要求
|
(Lamps for road vehicles. Performances requirements.)
|
NF R13-640-1989
|
汽车及其拖车车灯电源电压
|
(Road vehicles. Working voltages for lights fitted to motor vehicles and to their trailers.)
|
NF R13-702-1984
|
道路车辆.报警插头.接头.机械特性
|
(ROAD VEHICLES. DIAGNOSTIC PLUG. CONNECTOR. MECHANICAL CHARACTERISTICS.)
|
NF R13-704-1987
|
道路车辆.诊断系统.图形符号
|
(Road vehicles. Diagnostic systems. Graphical symbols.)
|
NF R13-705-1986
|
道路车辆.电子装置诊断
|
(Road vehicles. Diagnostic testing of electronic systems.)
|
NF R13-706-1985
|
道路车辆.报警系统.点火系统检验设备
|
(ROAD VEHICLES. DIAGNOSTIC SYSTEMS. EQUIPMENT FOR IGNITION SYSTEMS TESTING.)
|
NF R13-710-1995
|
道路车辆.低速系列数据通信.第1部分:概述和定义
|
(Road vehicles. Low-speed serial data communication. Part 1 : generals and definitions.)
|
NF R13-713-2002
|
道路车辆.诊断系统.诊断设备规范
|
(Road vehicles - Diagnostic systems - Diagnostic services specification.)
|
NF R13-714-1-2002
|
道路车辆.诊断系统.关键词协议2000.第1部分:物理层
|
(Road vehicles - Diagnostic systems - Keyword Protocol 2000 - Part 1 : physical layer.)
|
NF R13-714-2-2002
|
道路车辆.诊断系统.关键词协议2000.第2部分:数据链路层
|
(Road vehicles - Diagnostic systems - Keyword Protocol 2000 - Part 2 : data link layer.)
|
NF R13-714-3-2002
|
道路车辆.诊断系统.关键词协议2000.第3部分:应用层
|
(Road vehicles - Diagnostic systems - Keyword Protocol 2000 - Part 3 : application layer.)
|
NF R13-902-1986
|
道路车辆.无线电天线.在顶篷上的固定
|
(Road vehicles. Antennas. Roof mounting.)
|
NF R13-903-1992
|
道路车辆.运送危险品用3.5吨以上商业车辆和牵引车(N2,N3,03,T 04类).电气装置的导管和配件.试验方法和要求
|
(ROAD VEHICLES. COMMERCIAL VEHICLES AND TOWED VEHICLES HAVING A GVW (R) OF OVER 3,5 T (categories N2, N3, O3 AND O4) ASSIGNED FOR TRANSPORTATING DANGEROUS GOODS. CONDUITS AND FITTINGS FOR ELECTRICAL INSTALLATIONS. TEST METHODS AND REQUIREMENTS.)
|
NF R13-910-1998
|
道路车辆.电气和电子设备.电气设备集成模型的翻译语言
|
(Road vehicles. Electrical and electronic equipment. Translation language of models for integration of the electronic equipment.)
|
NF R14-210-1987
|
道路车辆.环形箱内控制仪表.嵌入直径和刻度型式
|
(Road vehicles. Check instruments with circular case. Recess diameters and gradations types.)
|
NF R14-216-1987
|
道路车辆.速度指示器.快速安装型活动插头
|
(Road vehicles. Speedometer. Quick setting power take-off.)
|
NF R14-313-1984
|
公路车辆.喇叭.在车上安装后的试验
|
(ROAD VEHICLES. SOUND SIGNALLING DEVICES. TESTS AFTER MOUNTING ON VEHICLE.)
|
NF R14-331-1-2000
|
道路车辆.电/电子开关设备.第1部分:继电器和闪光器
|
(Road vehicles - Electrical/electronical switching devices - Part 1 : relays and flashers.)
|
NF R14-331-2-2000
|
道路车辆.电/电子开关设备.第2部分:电子设备
|
(Road vehicles - Electrical/electronic switching devices - Part 2 : electronic devices.)
|
NF R14-331-3-2000
|
道路车辆.电/电子开关设备.第3部分:微型继电器
|
(Road vehicles - Electrical/electronical switching devices - Part 3 : microrelays.)
|
NF R14-332-1986
|
道路车辆.摩托车闪光器的电特性
|
(Road vehicles. Motor vehicles flasher units. Electrical characteristics.)
|
NF R14-333-1986
|
道路车辆.汽车中心闪光器.生产适合性
|
(ROAD VEHICLES. MOTOR VEHICLES FLASHER UNITS. PRODUCTION CONFORMITY.)
|
NF R14-408-1993
|
道路车辆.前灯清洁器
|
(Raod vehicles. Headlamp cleaners.)
|
NF R14-409-1984
|
道路车辆.后视镜.反射率测定的试验方法
|
(Road vehicles. Rear view mirrors. Test method for determining reflectance.)
|
NF R14-504-1992
|
轿车.挡风玻璃雨刷装置.雨刷刮片长度
|
(Passenger cars. Windscreen wiper systems. Wiper blade length.)
|
NF R14-505-1992
|
轿车.挡风玻璃雨刷装置.刮雨杆与刮片的连接
|
(Passenger cars. Windscreen wiper systems. Wiper arm-to-blade connections.)
|
NF R14-601-2000
|
道路车辆.刚性塑料安全玻璃材料试验
|
(Road vehicles - Tests for rigid plastic safety glazing materials.)
|
NF R14-602-2000
|
道路车辆.安全玻璃材料.机械试验
|
(Road vehicles - Safety glazing materials - Mechanical tests.)
|
NF R14-705-2003
|
道路车辆.运输信息和控制系统的人类工效学特性.对话管理原则和一致性程序
|
(Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures.)
|
NF R14-707-1-2003
|
道路车辆.与运输信息和控制系统有关的司机视野特性的测量.第1部分: 定义和参数
|
(Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1 : definitions and parameters.)
|
NF R14-708-2003
|
道路车辆.运输信息和控制系统的人类工效学方面.车内目视显示规范和一致性规程
|
(Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle visual presentation.)
|
NF R14-709-2003
|
道路车辆.运输信息和控制系统的工效学.驾驶时适用性的评定规程
|
(Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving.)
|
NF R15-402-1988
|
道路车辆.温度开关.试验方法和要求
|
(ROAD VEHICLES. THERMOMETRIC SWITCHES. TEST METHODS AND REQUIREMENTS.)
|
NF R15-403-1989
|
道路车辆.温度开关.尺寸特性
|
(ROAD VEHICLES. THERMOMETRIC SWITCHES. DIMENSIONAL CHARACTERISTICS.)
|
NF R15-504-1972
|
汽车制造用梯形环形皮带.几何特性
|
(ENDLESS V BELTS-GEOMETRICAL CHARACTERISTICS.)
|
NF R15-509-1988
|
汽车工业用窄三角皮带传动.疲劳试验
|
(Narrow-V-belt drives for the automotive industry. Fatigue test.)
|
NF R15-601-1991
|
道路车辆.冷却液.总规范和要求
|
(ROAD VEHICLES. COOLING FLUIDS. GENERAL SPECIFICATIONS AND REQUIREMENTS.)
|
NF R15-602-1-1991
|
道路车辆.冷却液.试验方法.第1部分:用比重计进行密度的测定
|
(ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 1 : MEASUREMENT OF DENSITY USING AN AREAMETER.)
|
NF R15-602-2-1991
|
道路车辆.冷却液.试验方法.第2部分:折射系数的测定
|
(ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 2 : MEASUREMENT OF REFRACTION INDEX.)
|
NF R15-602-3-1991
|
道路车辆.冷却液.试验方法.第3部分:灰份含量的测定
|
(ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 3 : MEASUREMENT OF ASH CONCTENT.)
|
NF R15-602-4-1991
|
道路车辆.冷却液.试验方法.第4部分:沸腾温度的测定
|
(ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 4 : MEASUREMENT OF BOILING POINT.)
|
NF R15-602-6-1991
|
道路车辆.冷却液.试验方法.第6部分:硬水适宜性的测定
|
(ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 6 : MEASUREMENT OF COMPATIBILITY WITH HARD WATER.)
|
NF R15-602-7-1991
|
道路车辆.冷却液.试验方法.第7部分:防腐蚀性能的测定.玻璃腐蚀方法
|
(ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 7 : MEASUREMENT OF CORROSION PROTECTION PROPERTIES. GLASSWARE CORROSION METHOD.)
|
NF R15-602-8-1991
|
道路车辆.冷却液.试验方法.第8部分:防腐蚀性能的测定.热板腐蚀方法
|
(ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 8 : MEASUREMENT OF CORROSION PROTECTION PROPERTIES. HOT PLATE CORROSION METHOD.)
|
NF R15-602-9-1991
|
道路车辆.冷却液.试验方法.第9部分:防腐蚀性能的测定.抗偏压电阻方法
|
(ROAD VEHICLES. COOLING FLUIDS. TEST METHODS. PART 9 : MEASUREMENT OF CORROSION PROTECTION PROPERTIES. GRID LEAK RESISTOR METHOD.)
|
NF R15-703-1-1996
|
道路车辆.罩型点火塞及汽缸盖上的座孔尺寸.第1部分:M14×1.25热线点火塞
|
(Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 1 : M14 X 1,25 glow-plugs.)
|
NF R15-703-2-1996
|
道路车辆.罩型点火塞及汽缸盖上的座孔尺寸.第2部分:M12×1.25热线点火塞
|
(Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. Part 2 : M12 X 1,25 glow-plugs.)
|
NF R15-704-2003
|
道路车辆.封装式预热塞. 一般要求和试验方法
|
(Road vehicles - Sheath-type glow-plugs - General requirements and test methods.)
|
NF R16-131-1986
|
道路车辆.液化石油气供油咀.尺寸特性
|
(ROAD VEHICLES. GPL NOZZLE SPOUTS. DIMENSIONAL CHARACTERISTICS.)
|
NF R16-132-1988
|
道路车辆.无铅汽油的注油口
|
(Road vehicles. Nozzle spouts for unleaded gasoline.)
|
NF R16-133-1988
|
道路车辆.含铅汽油和柴油注油口
|
(Road vehicles. Nozzle spouts for leaded gasoline and diesel fuel.)
|
NF R16-209-1984
|
道路车辆.压缩点火内燃机水平凸缘燃油过滤器端部.安装尺寸和两次过滤器连接尺寸
|
(ROAD VEHICLES. HEADS FOR FUEL FILTERS WITH HORIZONTAL FLANGE FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.)
|
NF R16-210-1984
|
公路车辆.压缩点火内燃机垂直凸缘三栓燃油过滤器端部.安装和连接尺寸
|
(ROAD VEHICLES. HEADS FOR FUEL FILTERS WITH VERTICAL FLANGE AND THREE BOLT FIXING FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.)
|
NF R16-217-1986
|
道路车辆.压燃内燃机用由定心螺栓固定和带水平法兰的单极燃油滤清器.安装和连接尺寸
|
(ROAD VEHICLES. SINGLE FUEL FILTERS WITH HORIZONTAL FLANGES AND CENTRE BOLT FIXING FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.)
|
NF R16-218-1986
|
道路车辆.压燃内燃机用带水平法兰用螺栓固定的燃油滤清器头.安装和连接尺寸
|
(ROAD VEHICLES. HEADS FOR SPIN-ON FUEL FILTERS WITH HORIZONTAL FLANGE FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.)
|
NF R16-219-1986
|
道路车辆.压燃内燃机用带垂直法兰的燃油滤清器头.安装和连接尺寸
|
(ROAD VEHICLES. HEADS FOR FUEL FILTERS WITH VERTICAL FLANGE FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.)
|
NF R16-221-1992
|
道路车辆.压燃式发动机用自旋滤油器.安装和连接尺寸
|
(Road vehicles. Spin-on fuel filters for compression-ignition engines. Mounting and connecting dimensions.)
|
NF R16-315-1982
|
道路车辆.柴油泵试验.第1部分:动力条件
|
(Fuel injection pump testing. Part 1 : dynamic conditions.)
|
NF R16-316-1989
|
道路车辆.带凸缘和节流阀式试验喷咀
|
(Road vehicles. Calibrating nozzle, delay pintle type.)
|
NF R16-317-1987
|
道路车辆.燃油喷射泵.试验用高压管
|
(Road vehicles. Fuel injection pumps. High-pressure pipes for testing.)
|
NF R16-318-1990
|
道路车辆.喷油设备用试验液体
|
(Road vehicles. Calibration fluid for diesel injection equipment.)
|
NF R16-319-2003
|
道路车辆.B型、S规格轴针式喷油嘴用20、21、21.1和27型旋入式喷油嘴保持座
|
(Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size “S“, type “B“.)
|
NF R16-321-1985
|
道路车辆.平面底座直线固定喷油泵
|
(ROAD VEHICLES. BASE MOUNTED IN-LINE FUEL INJECTION PUMPS.)
|
NF R16-322-1985
|
道路车辆.喷油泵试验.静态条件
|
(ROAD VEHICLES. FUEL INJECTION PUMP TESTING. STATIC CONDITIONS.)
|
NF R16-323-1985
|
道路车辆.商用车辆空气滤清部件.尺寸.A和B型
|
(ROAD VEHICLES. AIR FILTER ELEMENTS FOR COMMERCIAL VEHICLES. DIMENSIONS. TYPES A AND B.)
|
NF R16-324-1986
|
道路车辆.载重汽车用空气滤芯.C型和D型.尺寸
|
(ROAD VEHICLES. AIR FILTER ELEMENTS FOR COMMERCIAL VEHICLES. TYPES C AND D. DIMENSIONS.)
|
NF R16-325-1986
|
道路车辆.特种用途车辆用空气滤芯.P型和R型.尺寸
|
(ROAD VEHICLES. AIR FILTER ELEMENTS FOR PASSENGER CARS. TYPES P AND R. DIMENSIONS.)
|
NF R16-326-1986
|
道路车辆.空气滤清器接头.A型和B型.尺寸
|
(ROAD VEHICLES. AIR FILTER CONNECTIONS. TYPES A AND B. DIMENSIONS.)
|
NF R16-327-1986
|
道路车辆.喷油泵用安装法兰.尺寸
|
(ROAD VEHICLES. END-MOUNTING FLANGES FOR FUEL INJECTION PUMPS. DIMENSIONS.)
|
NF R16-330-2003
|
道路车辆.弧形底安装直列式喷油泵.安装尺寸
|
(Diesel engines - Cradle-mounted in-line fuel injection pumps - Mounting dimensions.)
|
NF R16-331-1986
|
道路车辆.柴油发动机.22型螺栓固定的喷嘴
|
(ROAD VEHICLES. DIESEL ENGINES. SCREW-IN INJECTOR,TYPE 22.)
|
NF R16-332-1-1993
|
道路车辆.燃料喷射设备的试验.第1部分:喷嘴检验及支架装置
|
(Road vehicles. Fuel injection equipment testing. Part 1 : calibrating nozzle and holder assemblies.)
|
NF R16-333-1989
|
道路车辆.燃油喷射泵试验.第3部分:产品应用和试验
|
(ROAD VEHICLES. FUEL INJECTION PUMP TESTING. PART 3 : APPLICATION AND TEST PROCEDURES.)
|
NF R16-335-1989
|
道路车辆.压燃式发动机.拧入式喷嘴座,23型
|
(ROAD VEHICLES. COMPRESSION-IGNITION ENGINES. SCREW-IN INJECTION NOZZLE HOLDER,TYPE 23.)
|
NF R16-401-1988
|
道路车辆.两孔椭圆形轮凸缘
|
(ROAD VEHICLES. TWO HOLE LIGHT OVAL FLANGES. DIMENSIONAL CHARACTERISTICS.)
|
NF R16-503-1985
|
道路车辆.全负荷机油滤清器过滤部件.尺寸
|
(ROAD VEHICLES. FILTER ELEMENTS FOR FULL FLOW OIL FILTERS. DIMENSIONS.)
|
NF R16-521-1986
|
道路车辆.球面头锥形短螺纹润滑器.尺寸特性
|
(Road vehicles. Lubricating spherical heads with short conical screw threads. Dimensional characteristics.)
|
NF R17-101-1972
|
带翻斗的车架
|
(Chassis of vehicles equipped with dumping bodies.)
|
NF R17-102-1987
|
道路车辆.运输车辆.功率输出轴和功率接受传动装置间的连接
|
(Road vehicles. Commercial vehicles. Couplings between power take-offs (pto) and ancillary driven units.)
|
NF R17-104-1984
|
道路车辆.液压式抓斗.安全装置
|
(ROAD VEHICLES. DUMP TRUCKS. SAFETY ARRANGEMENTS.)
|
NF R17-105-2001
|
道路车辆.活动翻斗用车辆.安全要求
|
(Road vehicles - Vehicles for transportable skips- Safety requirements.)
|
NF R17-106-2001
|
道路车辆.活动翻斗.功能尺寸和一般要求
|
(Road vehicles - Transportable skips - Functional dimensions and general requirements.)
|
NF R17-107-2001
|
道路车辆.可卸换翻斗的液压悬臂式车辆.安全要求
|
(Road vehicles - Vehicles equipped with hydraulic arms for removable skips - Safety requirements.)
|
NF R17-108-2001
|
道路车辆.液压悬臂式可卸换翻斗.功能尺寸和一般要求
|
(Road vehicles - Removable skips for hydraulic arms - Functional dimensions and general requirements.)
|
NF R17-110-1988
|
道路车辆.卡车后横架上机械连接装置安装
|
(Road vehicles. Mounting of mechanical coupling devices on rear cross members of trucks.)
|
NF R17-111-1988
|
道路车辆.拖车后横架上电连接装置安装
|
(ROAD VEHICLES. TOWING VEHICLES. MOUNTING OF ELECTRICAL CONNECTIONS ON REAR CROSS MEMBERS.)
|
NF R17-112-1-1998
|
垃圾收集车及其相关提升装置.一般要求和安全要求.第1部分:尾部负载的垃圾收集车
|
(Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements. Part 1 : rear-end loaded refuse collection vehicles.)
|
NF R18-001-1977
|
道路车辆.型号.名称.定义
|
(ROAD VEHICLES. TYPES. TERMS AND DEFINITIONS.)
|
NF R18-005-1980
|
特种车辆.尺寸规则
|
(DIMENSIONNAL CODES FOR PASSENGER CARS.)
|
NF R18-102-1988
|
道路车辆.倾斜式驾驶员室发生危险的预防
|
(ROAD VEHICLES. PREVENTION OF RISKS ARISING FROM TILTING-TYPE DRIVER`S CAB.)
|
NF R18-103-1987
|
道路车辆.大于12吨的商用车辆.驾驶室进入方法
|
(ROAD VEHICLES. COMMERCIAL VEHICLES OVER 12 TON. ACCESS TO DRIVER`S CAB.)
|
NF R18-150-1984
|
道路车辆.倾斜型车身组件的强度.规范和试验
|
(Road vehicles. Strength of components of tilt type bodywork. Specifications and testing.)
|
NF R18-151-1987
|
道路车辆.箱式送货车车身组件的强度.规范和试验
|
(Road vehicles. Strength of body parts type van. Specifications and testing.)
|
NF R18-152-1984
|
道路车辆.箱式送货车和“萨瓦人”型车身.车身入口
|
(Road vehicles. Box-type delivery van an tilt-type semi-trailer bodies. Access to the vehicle.)
|
NF R18-153-1989
|
道路车辆.车身部件的强度.规范和试验
|
(ROAD VEHICLES. STRENGTH OF THE BODYWORK COMPONENTS OF BARE PLATFORMS. SPECIFICATIONS AND TESTING.)
|
NF R18-154-1991
|
道路车辆.带或不带拉开式软边门的车身部件的强度.规范和试验
|
(ROAD VEHICLES. STRENGTH OF NON-RIGID SIDE WALL BODYWORK COMPONENTS,SLIDING OR NOT. SPECIFICATIONS AND TESTING.)
|
NF R18-401-1990
|
道路车辆.12吨以上PTAC实用车辆座位的传递振动情况.试验方法
|
(Road vehicles. Vibrations transmitted by the seats of commercial vehicles of laden weight greater than 12 tons. Test methods.)
|
NF R18-701-1979
|
道路车辆.气候调节制冷液用循环管
|
(ROAD VEHICLES. PIPES FOR CIRCULATING COOLANTS FOR AIR CONDITIONING.)
|
NF R18-702-1-1991
|
道路车辆.安装在3.5吨载重汽车上的自动加热装置.第1部分:一般安全规定
|
(ROAD VEHICLES. SELF SUSTAINED HEATING SYSTEMS INSTALLED ON COMMERCIAL VEHICULES OVER 3,5 TONNES GVW(R). PART 1 : GENERAL SAFETY REQUIREMENTS.)
|
NF R18-702-2-1992
|
道路车辆.3.5吨商业车辆上的自给式加热系统.第2部分:气体开动的丁烷/丙烷加热系统
|
(ROAD VEHICLES. SELF SUSTAINED HEATING SYSTEMS INSTALLED ON COMMERCIAL VEHICLES OVER 3,5 T GVW(R). PART 2 : SPECIFIC SAFETY REQUIREMENTS FOR GAZ OPERATED BUTAN/PROPAN HEATING SYSTEMS.)
|
NF R18-702-3-1991
|
道路车辆.安装在3.5吨载重汽车上的自动加热装置.第3部分:液体燃料装置的特殊安全规定
|
(ROAD VEHICLES. SELF SUSTAINED HEATING SYSTEMS INSTALLED ON COMMERCIAL VEHICLES OVER 3,5 TONNES GVW(R). PART 3 : SPECIFIC SAFETY REQUIREMENTS OF LIQUID FUEL OPERATED HEATING SYSTEMS.)
|
NF R18-702-4-1993
|
道路车辆.安装在3.5吨载重汽车上的自动加热装置.第4部分: 运输危险物品车辆的特殊安全要求
|
(Road vehicles. Seft sustained heating systems installed on commercial vehicles over 3,5 T gvw(R). Part 4 : specific safety requirements for vehicles transporting dangerous goods.)
|
NF R18-903-2-1996
|
道路车辆.顶部荷载装置.第2部分:附属装置和为特殊用途固定于顶梁的附属装置的固定
|
(Road vehicles. Roof load carrier devices. Part 2 : accessories and their attachments to the roof bars for special purpose applications.)
|
NF R18-903-3-1996
|
道路车辆.顶部荷载装置.第3部分:特殊用途屋顶装置
|
(Road vehicles. Roof load carrier devices. Part 3 : specific purpose roof devices.)
|
NF R18-905-1-2002
|
尾部升降机.安装在轮式车辆上的平台式升降机.安全要求.第1部分:货运尾部升降机
|
(Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1 : tail lifts for goods.)
|
NF R19-102-1986
|
道路车辆.公路车辆在铁路上的运输.外型结构尺寸
|
(Road vehicles. Railway transportation. Full sized model.)
|
NF R19-110-1-1994
|
滚装船上海运用车辆捆绑和安全装置.一般要求.第1部分:商业用车和车辆组合,半挂车除外(欧洲标准EN29367-1)
|
(Lashing and securing arrangements on road vehicles for sea transportation on ro/ro ships. General requirements. Part 1 : commercial vehicles and combinations of vehicles, semi-trailers excluded.)
|
NF R19-110-2-1995
|
滚装船上汽车捆绑和固定装置的一般要求.第2部分:半挂车(欧洲标准EN 29367-2)
|
(Lashing and securing arrangements on road vehicles for sea transportation on ro/ro ships. General requirements. Part 2 : semi-trailers.)
|
NF R19-130-2001
|
道路车辆.控制装置、指示器和信号装置的符号
|
(Road vehicles - Symbols for controls, indicators and tell-tales.)
|
NF R19-201-1985
|
道路车辆.车头汽车收音机.包括连接件在内的安装空间
|
(Road vehicles. Car radio for front installation. Installation space including connections.)
|
NF R19-401-2-1997
|
道路车辆.GSM移动电话.第2部分: GMS移动电话永久固定用线和连接物
|
(Road vehicles. GSM mobile phones. Part 2 : wiring and connectics for GSM mobile phones mounted permanently.)
|
NF R19-401-3-1997
|
道路车辆.GSM移动电话.第2部分: GMS移动电话可携带用线和连接物
|
(Road vehicles. GSM mobile phones. Part 3 : wiring and connectics for GSM mobile phones portables.)
|
NF R19-401-4-1997
|
道路车辆.GSM移动电话.第4部分:天线
|
(Road vehicles. GSM mobile phones. Part 4 : antenna.)
|
NF R19-401-5-1996
|
道路车辆.GSM移动电话.第5部分:免手提
|
(Road vehicles. GSM mobiles phones. Part 5 : hand-free.)
|
NF R20-001-1964
|
摩托车注册登记
|
(REGISTRATION PLATES FOR MOTORCYCLES.)
|
NF R20-101-1990
|
道路车辆.微型汽车.性能和试验
|
(ROAD VEHICLES. MINI CARS. CHARACTERISTICS AND TESTS.)
|
NF R21-502-1984
|
道路车辆.有点火装置摩托车排出污染气体的测量方法
|
(Road vehicles. Measurement method of gaseous pollutants emitted by motorcycles equipped with a controlled ingition engine.)
|
NF R21-510-1980
|
摩托自行车.发动机试验规则.发动机加率
|
(MOPEDS. ENGINE TEST CODE. NET POWER.)
|
NF R21-511-1998
|
机动脚踏车.最大速度的测定
|
(Mopeds. Measurement of the maximum speed.)
|
NF R21-512-1987
|
道路车辆.由装有控制点火发动机的机动脚踏两用车排气污染物测量方法
|
(ROAD VEHICLES. MEASUREMENT METHODS FOR GASEOUS POLLUTANTS EMITTED BY MOPEDS EQUIPPED WITH A CONTROLLED IGNITION ENGINE.)
|
NF R22-601-1945
|
自行车和摩托车鼓式制动器
|
(DRUM BRAKES FOR CYCLES AND MOTORCYCLES.)
|
NF R22-731-1987
|
摩托车轮胎和轮辋(指定系列规范).第1部分:型号
|
(MOTORCYCLE TYRES AND RIMS (CODE DESIGNATED SERIES). PART 1 : TYRES.)
|
NF R22-732-1987
|
机动脚踏车轮胎和轮辋(毫米制系列).第1部分:型号.全系列轮胎
|
(MOTORCYCLE TYRES AND RIMS (METRIC SERIES). PART 1 : TYRES. ALL SERIES.)
|
NF R22-733-1987
|
摩托车轮胎.摩托车轮胎和轮辋.(毫米系列)第2部分:100,90,80,70和60系列轮胎
|
(MOTORCYCLE TYRES AND RIMS (METRIC SERIES). PART 2 : TYRE SERIES 100,90,80,70 AND 60.)
|
NF R23-103-1932
|
摩托车磁发电机和直流发电机.锥轴端
|
(MAGNETOS AND DYNAMOS FOR MOTORCYCLES.)
|
NF R24-301-1961
|
摩托车前灯
|
(HEADLIGHTS FOR MOTORCYCLES.)
|
NF R24-302-1961
|
摩托车前灯
|
(HEADLIGHTS FOR MOTORCYCLES.)
|
NF R24-311-1987
|
道路车辆.摩托车.直流闪光装置
|
(ROAD VEHICLES. MOTORCYCLES. DIRECT CURRENT FLASHER UNITS.)
|
NF R24-312-1987
|
道路车辆.摩托车.交流闪光装置
|
(ROAD VEHICLES. MOTORCYCLES. ALTERNATING CURRENT FLASHER UNITS.)
|
NF R24-313-1987
|
道路车辆.机动脚踏两用车.直流闪光装置
|
(ROAD VEHICLES. MOPEDS. DIRECT CURRENT FLASHER UNITS.)
|
NF R24-314-1987
|
道路车辆.机动脚踏两用车.交流闪光装置
|
(ROAD VEHICLES. MOPEDS. ALTERNATING CURRENT FLASHER UNITS.)
|
NF R26-201-1945
|
摩托车燃料供应
|
(MOTORCYCLE FUEL FEED.)
|
NF R26-301-1955
|
摩托车化油器.安装
|
(MOTORCYCLE CARBURETORS. FIXING.)
|
NF R27-301-1984
|
道路车辆.摩托车后部减震器安装
|
(ROAD VEHICLES. MOTORCYCLES. MOUNTING OF REAR SHOCK ABSORBERS.)
|
NF R28-001-1984
|
道路车辆.两轮摩托车和摩托自行车尺寸.名称和定义
|
(ROAD VEHICLES. DIMENSIONS OF TWO WHEELED MOPEDS AND MOTORCYCLES. TERMS AND DEFINITIONS.)
|
NF R29-001-1997
|
规范.摩托车用转向盘柱锁
|
(SPECIFICATIONS. STEERING COLUMN LOCKS FOR MOTORCYCLES.)
|
NF R29-010-1997
|
实用导则.摩托车用电子锁
|
(PRACTICAL GUIDE. ELECTRONIC LOCKS FOR MOTORCYCLES.)
|
NF R30-004-1995
|
自行车.所有山地车的安全条件
|
(Bicycles. Safety requirements for all terrain bike.)
|
NF R30-020-1998
|
自行车.年青人用的自行车和全地形自行车的安全条件
|
(CYCLES. SAFETY REQUIREMENTS FOR BICYCLES, ALL TERRAIN BIKES AND BICYCLES FOR YOUNG CHILDREN.)
|
NF R32-100-1993
|
自行车.扁销和轮轴/扁销/曲柄的总成
|
(CYCLES. COTTER PIN AND ASSEMBLY OF THE AXLE/COTTER PIN/CRANK.)
|
NF R32-109-1972
|
自行车脚踏板.调整环.带螺纹端头环轴承脚踏板
|
(CYCLE CHAIN TRANSMISSION. ADJUSTABLE CONE.)
|
NF R32-110-1972
|
自行车脚踏板.调整环.带螺纹端头环轴承脚踏板
|
(CYCLE CHAIN TRANSMISSION. ADJUSTABLE CONE LOCKNUT.)
|
NF R32-113-1992
|
自行车.带方头配合的脚蹬轴和曲柄.安装尺寸
|
(CYCLES. PEDAL AXLE AND CRANK ASSEMBLY WITH SQUARE END FITTING. ASSEMBLY DIMENSIONS.)
|
NF R32-401-1974
|
自行车单齿飞轮
|
(CYCLE FREE WHEEL SPROCKET WITH PLAIN TEETH.)
|
NF R32-402-1992
|
自行车.用于自行车轮毂上装配飞轮的螺纹
|
(Cycles. Screw threads used to assemble freewheels on bicycle hubs.)
|
NF R32-407-1992
|
自行车.带花键轮毂和链轮.安装尺寸
|
(Cycles. Splined hub and sprocket. Assembly dimensions.)
|
NF R32-709-1992
|
自行车.辐条螺帽外形尺寸
|
(Cycles. External dimensions of spoke nipples.)
|
NF R32-710-1972
|
自行车轮胎
|
(CYCLES TYRES.)
|
NF R33-101-1974
|
自行车照明发电机.互换特性
|
(LIGHTING GENERATOR FOR CYCLES. INTERCHANGEABILITY CHARACTERISTICS.)
|
NF R33-102-1974
|
自行车照明发电机.在车架上的固定
|
(LIGHTING GENERATOR FOR CYCLES. CLAMPING ON THE FRAME.)
|
NF R33-103-1974
|
自行车照明发电机.技术规范和试验
|
(LIGHTING GENERATOR FOR CYCLES. TECHNICAL REQUIREMENTS AND TESTS.)
|
NF R33-601-1970
|
自行车和摩托车用电灯泡
|
(ELECTRIC BULBS FOR CYCLES AND MOTOR CYCLES.)
|
NF R34-101-1992
|
自行车.立柱和车把.安装尺寸
|
(Cycles. Stem and handlebar bend. Assembly dimensions.)
|
NF R34-113-1992
|
自行车.柄楔形角
|
(CYCLES. STEM WEDGE ANGLE.)
|
NF R34-114-1992
|
自行车.自行车(前后)叉上组装头附件用螺纹
|
(CYCLES. SCREW THREADS USED TO ASSEMBLE HEAD FITTINGS ON BICYCLE FORKS.)
|
NF R34-303-1987
|
自行车和摩托自行车铃.技术规范
|
(BELLS FOR BICYCLES AND MOPEDS. TECHNICAL SPECIFICATIONS.)
|
NF R38-401-1972
|
自行车.座位杆
|
(CYCLES-SEAT PILLAR.)
|
NF R38-402-1972
|
自行车.座
|
(CYCLES-SADDLE CLAMP.)
|
NF R38-404-1996
|
自行车.自行车行李架.概念、分类和试验
|
(CYCLES. LUGGAGE CARRIERS FOR BICYCLES. CONCEPTS, CLASSIFICATION AND TESTING.)
|
NF R39-101-1992
|
自行车.底托架组件用螺纹
|
(CYCLES. SCREW THREADS USED IN BOTTOM BRACKET ASSEMBLIES.)
|
NF R40-010-1974
|
挂车尺寸符号
|
(DIMENSIONAL SYMBOLS OF TRAILERS.)
|
NF R40-011-1974
|
半挂车尺寸符号
|
(DIMENSIONAL SYMBOLS OF SEMI-TRAILERS.)
|
NF R40-012-1974
|
道路车辆.牵引车和半挂车、卡车和挂车尺寸符号
|
(DIMENSIONAL SYMBOLS OF ROAD TRAINS TRACTOR AND SEMI-TRAILER-TRUCK AND TRAILER.)
|
NF R40-020-1988
|
道路车辆.挂车轴荷重分布.计算方法
|
(Road vehicles. Distribution of loads on the axles of trailers. Method of calculation.)
|
NF R40-021-1988
|
道路车辆.半挂车轴荷重分布.计算方法
|
(Road vehicles. Distribution of loads on the axles of semi-trailers. Method of calculation.)
|
NF R41-101-2003
|
商用道路车辆.牵引车和拖车间的机械连接件.环形42 mm x 68 mm的拉杆眼用联接装置
|
(Commercial road vehicles - Mechanical connections between towing vehicles and trailers - Coupling devices for toroidal drawbar eye of 42 mm x 68 mm.)
|
NF R41-102-2003
|
商用道路车辆.牵引车和拖车间的机械连接件.环形42 mm x 68 mm的拉杆眼
|
(Commercial road vehicles - Mechanical connections between towing vehicles and trailers - Toroidal drawbar eye of 42 mm x 68 mm.)
|
NF R41-103-1959
|
商业车辆托车用环耦合装置
|
(RING COUPLING FOR COMMERCIAL VEHICLE TRAILERS.)
|
NF R41-105-1952
|
商业车辆托车用环耦合装置
|
(RING COUPLING FOR COMMERCIAL VEHICLE TRAILERS.)
|
NF R41-108-1996
|
道路车辆.旅居车和轻型挂车的偶合球.尺寸
|
(Road vehicles. Coupling balls for caravans and light trailers. Dimensions.)
|
NF R41-109-1976
|
旅游拖车和轻型拖车.球形连接器静负荷
|
(CARAVANS AND LIGHT TRAILERS. STATIC LOADS ON THE BALL COUPLINGS.)
|
NF R41-111-1981
|
旅游拖车和轻型拖车的球形连接器
|
(BALL COUPLINGS FOR CARAVANS AND LIGHT TRAILERS.)
|
NF R41-117-1990
|
道路运输车辆.牵引车和挂车之间的机械连结.40mm的牵引装置
|
(COMMERCIAL ROAD VEHICLES. MECHANICAL CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS. 40 MM DRAWBAR COUPLING.)
|
NF R41-118-1990
|
道路运输车辆.牵引车和挂车之间的机械连结.50mm的牵引装置
|
(COMMERCIAL ROAD VEHICLES. MECHINAL CONNECTIONS BETWEE, TOWING VEHICLES. MECHANICAL CONNECTIONS BETWEEN TOWING VEHICLES AND TRAILERS. 50 MM DRAWBAR COUPLING.)
|
NF R41-150-1970
|
托车和半托车.空气压力制动连接
|
(TRAILERS AND SEMI-TRAILERS.AIR-PRESSURE BRAKING CONNECTIONS.)
|
NF R41-166-1982
|
道路车辆.半挂车50毫米连接销.基本尺寸和安装与互换特性
|
(Road vehicles. 50 semi-trailer fifth wheel coupling pin. Basic and mounting interchangeability dimensions.)
|
NF R41-171-2003
|
道路车辆.牵引座.可互换性
|
(Road vehicles - Fifth wheels - Interchangeability.)
|
NF R41-172-2002
|
公路运输车辆.第五轮连接器.强度试验
|
(Commercial road vehicles - Fifth wheel couplings - Strength tests.)
|
NF R41-173-2002
|
道路车辆.第五轮中枢销.强度试验
|
(Road vehicles - Fifth wheel kingpins - Strength test.)
|
NF R41-202-1955
|
自行车和摩托车挂车球形连接装置
|
(BALL COUPLING FOR CYCLE AND MOTORCYCLE TRAILERS.)
|
NF R42-602-1988
|
道路车辆.用惰性制动控制的旅行挂车和轻型挂车.力的计算
|
(Road vehicles. Caravans and light trailers. Control device for inertia braking. Calculation of forces.)
|
NF R42-608-1992
|
旅居车和轻便挂车.具有超速制动器的01和02类挂车.制动器的惯性实验室试验方法
|
(Caravans and light trailers. Trailers of categorie 01 and 02 with overrun brakes. Inertia bench test methods for brakes.)
|
NF R42-609-1992
|
旅居车和轻型挂车.带超速制动器的01和02类挂车.制动控制用的线性实验室试验方法
|
(CARAVANS AND LIGHT TRAILERS. TRAILERS OF CATEGORIES O1 AND O2 WITH OVERRUN BRAKES. LINEAR BENCH TEST METHODS FOR BRAKE CONTROLS.)
|
NF R43-406-1998
|
道路车辆.用24V系统的拖和被拖车辆之间的电气连接.7杆连接件型24V
|
(Road vehicles. Electrical connections between towing and towed vehicles with 24 V systems. 7 pole connector type 24 N (normal).)
|
NF R43-407-1998
|
道路车辆.有6-12V电气的牵引车辆和拖挂车之间的连接装置.12N标准型7极连接器
|
(Road vehicles. Electrical connections between towing and towed vehicles with 12 V systems. 7 pole connector type 12 N (normal).)
|
NF R43-409-1998
|
道路车辆.24V电气设备的牵引车辆和挂车之间的电气连接装置.24S(附加)型7极电连接器
|
(Road vehicles. Electrical connections between towing and towed vehicles with 24 V systems. 7 pole connector type 24 S (supplementary).)
|
NF R43-410-1998
|
道路车辆.12V电气设备的牵引车辆和挂车之间的电气连接装置.12S型(附加型)7极电连接器
|
(Road vehicles. Electrical connections between towing and towed vehicles with 12 V systems. 7 pole connector type 12 S (supplementary).)
|
NF R43-411-1992
|
道路车辆.牵引车和挂车的电连接器.试验方法和性能要求
|
(Road vehicles - Connectors for electrical connections between towing vehicles and trailers - Test methods and performance requirements.)
|
NF R43-411/A1-2000
|
道路车辆.牵引车和挂车间电连接用连接器.试验方法和性能要求
|
(Road vehicles - Connectors for electrical connections between towing vehicles and trailers - Test methods and performance requirements.)
|
NF R43-412-2002
|
乘用车和具有12伏电压系统的轻工业用车. 在牵引车和挂车之间的13杆连接器的尺寸和触点的分配
|
(Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation.)
|
NF R43-413-1996
|
24V系统商用车辆.牵引车和拖车间的15杆连接器.尺寸和接触定位
|
(COMMERCIAL VEHICLES WITH 24 V SYSTEMS. 15-POLES CONNECTORS BETWEEN TOWING VEHICLES AND TRAILERS. DIMENSIONS AND CONTACT ALLOCATION.)
|
NF R47-101-1979
|
带翻斗挂车的液压耦合器
|
(Hydraulic coupling for trailer vehicles equipped with dumping bodies.)
|
NF R47-102-1987
|
半挂车支架.功能特性
|
(Road vehicles. Legs for semi-trailers. Functional characteristics.)
|
NF R50-101-1-1997
|
电车安全的特殊要求.能量储存板
|
(ELECTRICALLY PROPELLED ROAD VEHICLES. SPECIFIC REQUIREMENTS FOR SAFETY. PART 1 : ON BOARD ENERGY STORAGE. (EUROPEAN STANDARD EN 1987-1).)
|
NF R50-101-2-1997
|
电车安全的特殊要求.性能安全措施和预防失败
|
(ELECTRICALLY PROPELLED ROAD VEHICLES. SPECIFIC REQUIREMENTS FOR SAFETY. PART 2 : FUNCTIONAL SAFETY MEANS AND PROTECTION AGAINST FAILURES. (EUROPEAN STANDARD EN 1987-2).)
|
NF R50-101-3-1998
|
电车安全的特殊要求.电伤害的防护
|
(ELECTRICALLY PROPELLED ROAD VEHICLES. SPECIFIC REQUIREMENTS FOR SAFETY. PART 3 : PROTECTION OF USERS AGAINST ELECTRICAL HAZARDS. (EUROPEAN STANDARD EN 1987-3).)
|
NF R50-701-2001
|
电气推动道路车辆.术语
|
(Electrically propelled road vehicles - Terminology.)
|
NF R52-011-1996
|
电驱动道路车辆.道路使用能力的测量.第1部分:纯电动车辆(欧洲标准EN 1821-1)
|
(ELECTRICALLY PROPELLED ROAD VEHICLES. MEASUREMENT OF ROAD OPERATING ABILITY. PART 1 : PURE ELECTRIC VEHICLES. (EUROPEAN STANDARD EN 1821-1).)
|
NF R52-021-1998
|
电驱动道路车辆.能量性能的测量.第1部分:纯电动车辆
|
(ELECTRICALLY PROPELLED ROAD VEHICLES. MEASUREMENT OF ENERGY PERFORMANCES. PART 1 : PURE ELECTRIC VEHICLES. (EUROPEAN STANDARD EN 1986-1).)
|
NF R52-111-1999
|
电驱动道路车辆.道路使用能力的测量.第2部分:热电混合车辆
|
(ELECTRICALLY PROPELLED ROAD VEHICLES. MEASUREMENT OF ROAD OPERATING ABILITY. PART 2 : THERMAL ELECTRIC HYBRID VEHICLES. (EUROPEAN STANDARD EN 1821-2).)
|
NF R52-121-2001
|
电气推动道路车辆.能效测量.第2部分:热电复式动力车
|
(Electrically propelled road vehicles - Measurement of energy performances - Part 2 : thermal electric hybrid vehicles.)
|
NF R52-131-2001
|
电气推动道路车辆.复式动力车的排放测量.第1部分:热电复式动力车
|
(Electrically propelled road vehicles - Measurement of emissions of hybrid vehicles - Part 1 : thermal electric hybrid vehicles.)
|
NF R57-301-2002
|
电动道路车辆.车辆荷载运行期间产生的噪声.声级测定
|
(Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level.)
|
NF R61-301-1978
|
自行车用六角螺母和板手
|
(HEXAGONAL NUTS AND SPANNERS FOR CYCLES.)
|
NF R61-701-1978
|
汽车设备用铰车
|
(WINCHES FOR MOTOR VEHICLE EQUIPMENT.)
|
NF R63-101-1998
|
车辆升降机(欧洲标准EN 1493)
|
(Vehicle lifts.)
|
NF R63-201-1985
|
道路车辆.汽车车库工具.测量和检验工具
|
(ROAD VEHICLES. GARAGE EQUIPMENT. ENGINE TESTING AND MEASURING EQUIPMENT.)
|
NF R63-202-2000
|
道路车辆.汽车车库工具.发动机RPM转速计.总规范
|
(Road vehicles - Garage equipment - Engine RPM tachometer - General specifications.)
|
NF R63-301-1984
|
道路车辆.汽车车库工具.推进装置几何测量设备
|
(ROAD VEHICLES. GARAGE EQUIPMENT. GEOMETRY CONTROL DEVICES FOR RUNNING GEAR.)
|
NF R63-302-1999
|
压力仪表.摩托车轮胎压力和/或膨胀率用检查仪器
|
(Pressure gauges. Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles. Metrology, requirements and testing.)
|
NF R63-304-1986
|
道路车辆.汽车车库工具.转动平台
|
(ROAD VEHICLES. GARAGE EQUIPMENT. SWIVEL-PLATE.)
|
NF R63-703-1987
|
道路车辆.车库工具.步数计
|
(ROAD VEHICLES. GARAGE EQUIPMENT. PEDOMETERS.)
|
NF R63-705-1982
|
道路车辆.汽车车库工具.自录式减速计
|
(ROAD VEHICLES. GARAGE EQUIPMENT. RECORDING DECELEROMETERS.)
|
NF R63-801-1982
|
道路车辆.汽车车库工具.照明灯校正设备
|
(ROAD VEHICLES. GARAGE EQUIPMENT. EQUIPMENT FOR CHECKING AND ADJUSTING LIGHTS.)
|
NF R81-303-1982
|
带皮软微孔塑料.汽车制造用耐磨强度
|
(FLEXIBLE CELLULAR PLASTICS WTIH SKIN. RESISTANCE TO RUBBING FOR AUTOMOBILE CONSTRUCTION.)
|
NF R81-304-1982
|
带皮软微孔塑料.汽车制造试验用样块
|
(FLEXIBLE CELLULAR PLASTICS WITH SKIN. SAMPLE BLOCK FOR TEST PURPOSES FOR AUTOMOBILE CONSTRUCTION.)
|
NF R81-305-1982
|
带皮软微孔塑料.人造光(氙灯)下汽车制造用塑料皮老化试验
|
(FLEXIBLE CELLULAR PLASTICS WITH SKIN. SKIN AGEING TEST UNDER ARTIFICIAL LIGHT (XENON LAMPS) FOR AUTOMOBILE CONSTRUCTION.)
|
NF R83-101-1982
|
硬塑料.用汽车制造中的喷丸处理测定耐磨强度
|
(RIGID PLASTICS. RESISTANCE TO WEAR BY SHOT-BLASTING FOR AUTOMOBILE CONSTRUCTION.)
|
NF R93-911-1978
|
汽车制造膨胀塞
|
(EXPANSIBLE CAPS FOR AUTOMOBILE CONSTRUCTION.)
|
NF R94-301-1989
|
道路车辆.带O型密封圈的螺纹连接尺寸特征
|
(ROAD VEHICLES. THREADING CONNECTION FOR COMPONENTS INCLUDING AN “0“ RING. DIMENSIONAL CHARACTERISTICS.)
|
NF R99-210-1979
|
道路车辆.压制橡胶混料.分类.符号.特性
|
(ROAD VEHICLES. COMPACT RUBBER BASED COMPOUNDS. CLASSIFICATION. SYMBOLIZATION. CHARACTERISTICS.)
|
NF S27-014-1986
|
电影摄影.为汽车上观众露天放映的场地
|
(Cinematography. Film projection areas for drive-in movies.)
|
NF S30-292-2001
|
声学.由内陆,水路,港口车辆发出的气载噪音的测量
|
(Acoustics - Measurement of airbone sound emitted by vessels on inland waterways and harbours.)
|
NF S31-019-1973
|
声学.测量有轨环行车辆发出噪音试验规则
|
(Acoustics. Measurement of noise emitted by railbound vehicles.)
|
NF S31-028-1974
|
声学.有轨环行车辆内噪音测定
|
(Acoustics. Measurement of noise inside railbound vehicles.)
|
NF S31-059-1983
|
声学.导管发出噪音测量试验规范(车削工艺)
|
(Acoustics. Test code for the measurement of noise emitted by bar guide tubes (screw cutting industry).)
|
NF S31-150-1990
|
声学.机动脚踏两用车噪音的测定.鉴定法
|
(ACOUSTICS. MEASUREMENT OF NOISE EMITTED BY TWO-WHEELED MOPEDS IN MOTION. ENGINEERING METHOD.)
|
NF S31-600-3-1999
|
声学.低噪音车间(含机械噪音)设计的推荐实施规范.第3部分:工作室中的噪音降低和声音传播
|
(Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 3 : sound propagation and noise prediction in workrooms.)
|
NF S52-002-2001
|
小型赛车比赛.租借小型赛车.安全要求
|
(Karting - Hire karts - Safety requirements.)
|
NF S52-329-6-2001
|
固定训练设备.第6部分:脚踏车、附加特殊安全要求和试验方法
|
(Stationary training equipment - Part 6 : treadmills, additional specific safety requirements and test methods.)
|
NF S52-802-2003
|
敞篷车用帆布蓬.安全要求
|
(Caravan awnings - Safety requirements.)
|
NF S52-803-2001
|
敞篷车篷帆.功能要求和试验方法
|
(Caravan awnings - Fonctional requirements and test methods.)
|
NF S54-001-2003
|
儿童用品.轮式儿童车辆.安全要求和试验方法
|
(Child care articles - Wheeled child conveyances - Safety requirements and test methods.)
|
NF S54-008-2001
|
儿童保育用品.婴儿步行车..安全要求和实验方法
|
(Child care articles - Baby walking frames - Safety requirements and test methods.)
|
NF S54-201-4/A1-2003
|
游乐场地设备.第4部分:缆车索道的附加特殊安全要求和试验方法
|
(Playground equipment - Part 4 : additional specific safety requirements and test methods for runways.)
|
NF S56-050-2003
|
修闲度假用旅游房车.术语和定义
|
(Leisure accomodation vehicles - Terms and definitions.)
|
NF S56-101-1978
|
旅游挂车.车颈用轨道断面
|
(CARAVANS. PROFILE OF CANOPY RAIL.)
|
NF S56-102-1998
|
旅居车辆.旅游挂车.第2部分:使用者的有效负载
|
(Leisure accommodation vehicles. Caravans. Part 2 : user payloads.)
|
NF S56-103-1998
|
旅居车辆.带篷汽车.第2部分:使用者的有效负载
|
(Leisure accommodation vehicles. Motor caravans. Part 2 : user payloads.)
|
NF S56-110-1998
|
旅游食宿车.旅居挂车.第1部分:住所的卫生和安全要求
|
(Leisure accommodation vehicles. Caravans. Part 1 : habitation requirements relating to health and safety.)
|
NF S56-110/A1-2002
|
旅游食宿车.旅居挂车.第1部分:住所的卫生和安全要求
|
(Leisure accommodation vehicles - Caravans - Part 1 : habitation requirements relating to health and safety.)
|
NF S56-111-1998
|
旅游食宿车.旅居车.第1部分:住所的卫生和安全要求
|
(Leisure accommodation vehicles. Motor caravans. Part 1 : habitation requirements relating to health and safety.)
|
NF S56-111/A1-2002
|
旅游食宿车.旅居车.第1部分:住所的卫生和安全要求
|
(Leisure accommodation vehicles - Motor caravans - Part 1 : habitation requirements relating to health and safety.)
|
NF S56-112-1998
|
旅游食宿车.家庭渡假旅居挂车.住所的卫生和安全要求
|
(Leisure accommodation vehicles. Caravan holiday homes. Habitation requirements relating to health and safety.)
|
NF S56-112/A1-2001
|
休闲住宿车辆.假期家用旅居挂车.与健康和安全有关的居住要求
|
(Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety.)
|
NF S56-112/A2-2002
|
旅游食宿车.家庭渡假旅居挂车.住所的卫生和安全要求
|
(Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety.)
|
NF S56-201-1982
|
旅游挂车和机动旅游车的电气安装
|
(Electrical installation in caravans and motor caravans.)
|
NF S56-202-1997
|
旅游车辆.12V直流超低压电气装置.第1部分:旅游挂车
|
(Leisure accomodation vehicles. 12 V direct current extra low voltage electrical installations. Part 1 : caravans.)
|
NF S56-203-1997
|
旅游车辆.12V直流超低压电气装置.第2部分:机动旅游车
|
(Leisure accomodation vehicles. 12 V direct current extra low voltage electrical installations. Part 2 : motor caravans.)
|
NF S56-300-1987
|
旅游挂车.不拆卸的基本技术检验
|
(CARAVANS. ELEMENTARY TECHNICAL INSPECTION WITHOUT DISMANTING.)
|
NF S56-320-1998
|
休闲提供食宿车辆.安全通风要求
|
(Leisure accomodation vehicles. Safety ventilation requirements.)
|
NF S56-321-1996
|
旅居车.液体燃料供暖系统.第1部分:旅居挂车和活动房(度假用大篷车)
|
(Leisure accommodation vehicles. Liquid fuel heating systems. Part 1 : caravans and mobile homes (caravan holiday homes).)
|
NF S61-116-2003
|
消防水龙带.泵和水车用半硬度输水软管和软管组合件
|
(Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles.)
|
NF S61-509-1-1998
|
消防与救援设施车辆.第1部分:术语和名称与符号
|
(Firefighting and rescue service vehicles. Part 1 : nomenclature and designation.)
|
NF S61-509-2-2002
|
消防和援救用车辆.第2部分:通用要求.安全和性能
|
(Firefighting and rescue service vehicles - Part 2 : Common requirements - Safety and performance.)
|
NF S61-522-1981
|
消防车用转动绞盘
|
(Rotary hose reels with axial feed for fire fighting vehicles.)
|
NF S61-523-1970
|
消防设备.救护汽车和消防汽车.高功率消防绞盘
|
(FIRE FIGHTING EQUIPMENT. FIRE FIGHTING AND RESCUE SERVICE MOTOR VEHICLES. HIGH POWER HOSE REELING VEHICLES.)
|
NF S61-530-1991
|
救护车与消防车.窒息和受伤用救护车
|
(FIRE FIGHTING AND RESCUE SERVICE VEHICLES. RESCUE EMERGENCY VEHICLES TO VICTIMS SUFFERING FROM ASPHYXIA AND INJURIES.)
|
NF S61-550-1983
|
救护车和消防车.自动升降设备
|
(Fire fighting and rescue service vehicle. Mobile lifting equipment.)
|
NF S62-202-1973
|
大型车库中喷水式固定自动灭火器
|
(FIXED AUTOMATIC FIRE FIGHTING SYSTEM USING ATOMIZED WATER IN LARGE GARAGES.)
|
NF S62-221-2001
|
固定消防设备.洒水车和喷水系统元件.第1部分:洒水车
|
(Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1 : sprinklers.)
|
NF S64-021-1971
|
救护.救护器材.急诊和复诊救护车.窒息和受伤用急救车
|
(RESCUE EQUIPMENT. EMERGENCY AMBULANCES. VEHICLES EQUIPPED TO GIVE FIRST AID TO VICTIMS SUFFERING FROM ASPHYXIA AND INJURIES.)
|
NF S64-021/A1-2003
|
医疗车辆及其设备.道路救护车
|
(Medical vehicles and their equipment - Road ambulances.)
|
NF S72-305-1997
|
摩托车,机动自行车驾驶员用安全帽(包括修改件A1:1997)
|
(PROTECTIVE HELMETS FOR MOTORCYCLE, MOPED AND MOTORIZED BIKE USERS. (INCLUDES AMENDMENT A1:1997).)
|
NF S72-403-1997
|
滑冰和滑旱冰人及骑车人用安全帽(欧洲标准EN 1078)
|
(Helmets for pedal cyclists and for users of skateboards and roller skates.)
|
NF S72-422-2002
|
摩托雪橇和二橇拖材车的驾驶者和乘客用防护性头盔
|
(Protective helmets for drivers and passengers of snowmobiles and bobsleighs.)
|
NF S73-507-2002
|
专业摩托车驾驶者用防护鞋类.要求和试验方法
|
(Protective footwear for professional motorcycle riders - Requirements and test methods.)
|
NF S74-538-1-1998
|
摩托车驾驶员抗机械冲击用防护服.第1部分:冲击防护装置的要求和试验方法
|
(Motorcyclists` protective clothing against mechanical impact. Part 1 : requirements and test methods for impact protectors.)
|
NF S74-542-1999
|
赛车手防护服.防热和防火.性能要求和试验方法
|
(Protective clothing for automobile racing drivers. Protection against heat and flame. Performance requirements and test methods.)
|
NF S74-542/A1-2002
|
汽车赛手防护服.热和火焰防护.性能要求和试验方法.修改件 1:改进的弯曲试验
|
(Protective clothing for automobile racing drivers - Protection against heat and flame - Performance requirements and test methods - Amendment 1 : modified flexion test.)
|
NF S74-549-1-2003
|
职业摩托车骑者用防护服.短外衣、长裤子、连体或分体套装.第1部分:一般要求
|
(Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 1 : general requirements.)
|
NF S74-549-2-2003
|
职业摩托车骑者用防护服.短上衣、长裤和连体或分体套装.第2部分:耐冲击摩擦性的试验方法
|
(Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 2 : test method for determination of impact abrasion resistance.)
|
NF S74-549-3-2002
|
专业摩托车驾驶者用防护服装.夹克、长裤、单件或套服.第3部分:撕裂强度测定的试验方法
|
(Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 3 : test method for determination of burst strength.)
|
NF S74-549-4-2002
|
专业摩托车驾驶者用防护服装.夹克、长裤、单件或套服.第4部分:冲击切割阻力测定的试验方法
|
(Protective clothing for professional motorcycles riders - Jackets, trousers and one-piece or divided suits - Part 4 : test method for determination of impact cut resistance.)
|
NF S75-510-2003
|
职业摩托车骑者用防护手套.要求和试验方法
|
(Protective gloves for professional motorcycle riders - Requirements and test methods.)
|
NF S77-117-1998
|
个人眼睛保护.机动脚踏车和摩托车驾驶者护目镜.(欧洲标准EN 1938)
|
(Personal eye protection. Goggles for motorcycle and moped users.)
|
NF S77-121-2000
|
人员眼睛的保护.雪地汽车使用者的眼睛保护设备
|
(Personal eye-protection - Eye protectors for snowmobile users.)
|
NF S90-605-1982
|
残疾人用车和轮椅.试验设备
|
(Vehicles and wheelchairs for the handicapped. Test device.)
|
NF S90-606-1989
|
轮椅.第3部分:刹车效果的测定
|
(Wheelchairs. Part 3 : determination of effiency of brakes.)
|
NF S95-201-1999
|
道路救护车中使用的担架和其他运输病人设备的规范
|
(Specifications for stretchers and other patient handling equipment used in road ambulances.)
|
NF S95-202-2003
|
航空、水域和复杂地形用救护车.第1部分:连续救护患者用医疗器械接口要求
|
(Air, water and difficult terrain ambulances. Part 1 : medical device interface requirements for the continuity of patient care.)
|
NF S95-203-2003
|
航空、水域和复杂地形用救护车.第2部分:连续救护患者的操作和技术要求
|
(Air, water and difficult terrain ambulances. Part 2 : operational and technical requirements for continuity of patient care.)
|
NF S96-103-1999
|
电动轮椅、小型摩托车及其充电器.要求和试验方法
|
(Electrically powered wheelchairs, scooters, and their chargers. Requirements and test methods.)
|
NF T47-266-1999
|
加油车运输用橡胶软管和软管组件.规范
|
(RUBBER HOSES AND HOSE ASSEMBLIES FOR FUEL TRUCK DELIVERY. SPECIFICATION. (EUROPEAN STANDARD EN 1761).)
|
NF T60-189-1995
|
润滑脂.车轮轴承脂的渗漏趋势
|
(LUBRICATING GREASES. LEAKAGE TENDENCIES OF AUTOMOTIVE WHEEL BEARING GREASES.)
|
NF T73-102-1993
|
表面活性剂.车间洗手带溶剂洗涤剂.规范.试验
|
(Surface active agents. Industrial detergents containing solvent for washing hands. Specifications. Tests.)
|
NF T81-002-1978
|
运输车辆.罐车.术语
|
(TRANSPORT EQUIPMENT. LORRIES. TERMINOLOGY.)
|
NF T81-004-1984
|
运输车辆.液体罐车.装满或防溢装置.有关表格和规定
|
(TRANSPORT EQUIPMENT. TANK FOR LIQUID PRODUCTS. FILLING AND OVERFLOW CONTROL DEVICE. FASTENING AND CORRESPONDENCE TABLE.)
|
NF T81-103-1980
|
液态体化学产品的运输和装卸.底部注入或排放的罐车.内部关闭阀和安全阀.使用压力等于或小于4巴
|
(TRANSPORTATION AND HANDLING OF LIQUID CHEMICAL PRODUCTS. TANKER VEHICLES FILLED AND EMPTIED FROM BELOW. INTERNAL SAFETY AND STOP VALVE. OPERATING PRESSURE EQUAL TO OR LESS THAN 4 BAR.)
|
NF T81-104-1981
|
液态体化学产品的运输和装卸.底部注入或排放的罐车.4-40bar工作压力用标准尺寸DN80和DN100的
|
(TRANSPORTATION AND HANDLING OF LIQUEFIED GASES. TANKER VEHICULES FILLED AND EMPTIED FROM BELOW. INTERNAL SAFETY GATES DN 80 AND DN 100 FOR OPERATING PRESSURES BETWEEN 4 BAR AND 40 BAR.)
|
NF T81-106-1976
|
喷雾状产品的运输.最大压力2.5bar气动排空的道路罐车.接头
|
(TRANSPORTATION OF POWDERY PRODUCTS. ROAD TANKERS WITH PNEUMATIC DISCHARGE UNDER MAXIMUM PRESSURE 2.5 BAR. COUPLING.)
|
NF T81-107-2003
|
运输与装卸.道路罐车.操作人员的安全.入口与操作安全
|
(Transport and handling - Road tankers - Operators safety - Acces and handling securities.)
|
NF T81-122-1979
|
运输设备.液态化学产品罐车.油槽
|
(TRANSPORTATION EQUIPMENT. ROAD TANKERS FOR LIQUID CHEMICAL PRODUCTS. DRAWING-UP DEPRESSION.)
|
NF T81-123-1979
|
运输设备.承压液化气罐车.测量孔、除气孔和检验孔
|
(TRANSPORTATION EQUIPMENT. ROAD TANKERS FOR LIQUIFIED PRESSURE GAS. HOLES FOR GAUGING,DEGASSING AND TESTING.)
|
NF T81-151-1977
|
化学产品的运输与装卸.道路罐车.用销或螺栓固定的阀门用圆盖
|
(TRANSPORTATION AND HANDLING OF CHEMICALS. ROAD TANKERS. CAPS FOR VALVES FIXED BY PINS OR BOLTS.)
|
NF T81-152-1978
|
液态化学产品的运输与装卸.罐车.500和600圆顶盖.带扣钉螺栓的闭锁装置
|
(TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS. ROADS TANKERS. 500 AND 600 DOMCOVER. CLOSING DEVICES WITH CLAMPS.)
|
NF T81-200-1979
|
运输与装卸.货车和罐车.注入和排放的固定装置.综合
|
(TRANSPORT AND HANDLING-RAIL CARS AND ROAD TANKERS. PERMANENT STATIONS FOR THE LOADING AND UNLOADING. GENERAL.)
|
NF T81-201-1979
|
运输与装卸.货车和罐车.液态化学产品的注入与排放的固定位置
|
(TRANSPORT AND HANDLING-RAIL CARS AND ROAD TANKERS. PERMANENT STATIONS FOR THE LOADING AND UNLOADING OF LIQUID CHEMICAL PRODUCTS.)
|
NF T81-202-1979
|
运输与装卸.货车和罐车.液化气或溶解气下部压力注入与排放的固定位置
|
(TRANSPORT AND HANDLING. RAIL CARS AND ROAD TANKERS. PERMANENT STATIONS FOR BOTTOM LOADING AND UNLOADING OF PRESSURIZED LIQUEFIED OR DISSOLVED GASES.)
|
NF T81-203-1979
|
有轨货车和公路罐车的运输和装卸.液化气或溶解气顶端装卸的固定位置
|
(TRANSPORT AND HANDLING RAIL CARS AND ROAD TANKERS. PERMANENT STATIONS FOR TOP LOADING AND UNLOADING OF PRESSURIZED LIQUEFIED OR DISSOLVED GASES.)
|
NF T81-204-1979
|
运输与装卸.货车和罐车.喷雾状产品注入与排放的固定位置
|
(TRANSPORT AND HANDLING. RAIL CARS AND ROAD TANKERS. PERMANENT STATIONS FOR THE LOADING AND UNLOADING OF PULVERULENT PRODUCTS.)
|
NF U02-052-1-2003
|
高离地间隙拖拉机.倾斜稳定性.翻车时保护.第1部分:稳定性.计算方法
|
(High-clearance tractors - Stability on slopes and protection in event of overturning - Part 1 : stability - Calculation methods.)
|
NF U02-052-2-2002
|
高地隙拖拉机.倾斜稳定性.翻车时保护.第2部分:翻车时的保护.计算方法
|
(High-clearance tractors - Stability on slopes and protection in event of overturning - Part 2 : protection in event of overturning - Calculation methods.)
|
NF U02-085-1990
|
道路车辆、农业和林业用拖拉机和机械.内部材料抗燃烧特性的测定
|
(Road vehicles, and tractors and machinery for agriculture and forestry. Determination of burning behaviour of interior materials.)
|
NF U03-024-1-2000
|
农用拖车和自推动设备.考虑到灰尘和植物健康产品的空气净化室的性能.要求和试验.第1部分:空气净化装置
|
(Agricultural tractors and self-propelled equipment - Performance of air purifyied cabs with respect to dust and plant health products - Requirements and tests - Part 1 : air purification devices.)
|
NF U10-211-2000
|
农用拖车.试验规程.第12部分:低温起动
|
(Agricultural tractors - Test procedures - Part 12 : low temperature starting.)
|
NF U14-022-1976
|
农用半拖车.“B“型牵引环
|
(AGRICULTURAL SEMI-TRAILERS. COUPLING-RING TYPE “B“.)
|
NF U14-022-2-2002
|
农用车辆.拖挂车辆的机械连接装置.第2部分: 带40座孔的连接环
|
(Agricultural vehicles - Mechanical connections on towed vehicles - Part 2 : coupling ring 40 with socket.)
|
NF U14-023-1983
|
农用车辆.拖车的机械连接装置.第2部分:U型挂钩型号.尺寸
|
(AGRICULTURAL VEHICLES. MECHANICAL CONNECTIONS ON TOWING VEHICLES. PART 2 : CLEVIS TYPE. DIMENSIONS.)
|
NF U14-025-1997
|
农用车辆.牵引车辆的机械连接装置.第3部分:拖拉机牵引杆
|
(AGRICULTURAL VEHICLES. MECHANICAL CONNECTIONS ON TOWING VEHICLE. PART 3 : TRACTOR DRAWBAR.)
|
NF U14-026-1990
|
农用车辆.拖车上的机械连接.第4部分:PIION型.尺寸
|
(AGRICULTURAL VEHICLES. MECHNICAL CONNECTIONS ON TOWING VEHICLES. PART 4 : RING-BOLT. SPECIFICATIONS.)
|
NF U14-027-2002
|
农用车辆.牵引车上机械吊钩式连接件.试验方法和要求
|
(Agricultural vehicles - Mechanical hook-type connections on towing vehicles - Test methods and requirements.)
|
NF U14-028-2002
|
农用车辆.拖挂车和牵引车辆之间的机械连接.第2部分:40 U型钩规范
|
(Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 2 : specifications for clevis coupling 40.)
|
NF U14-030-1995
|
林业机械.绞车.性能要求
|
(Machinery for forestry. Winches. Performance requirements.)
|
NF U14-305-1985
|
林业机具.绞车.分类和名称
|
(Machinery for forestry. Winches. Classification and nomenclature.)
|
NF U16-051-1985
|
农用牵引车制动和制动装置.实验室试验法
|
(Trailed agricultural vehicles. Brakes and braking devices. Laboratory test method.)
|
NF U16-101-1984
|
农用拖车.套管筒式单动作抓斗式起重拖车.系列25进气压力表(MPa)
|
(250bar2,3 型.互换尺寸 (AGRICULTURAL TRAILERS. SINGLE-ACTING TELESCOPIC TIPPING CYLINDERS. 25 MPA (250 BAR) SERIES. TYPLES 1,2 AND 3. INTERCHANGEABILITY DIMENSIONS.)
|
NF U16-102-1999
|
农业机械.农用挂车和拖挂设备.牵引杆插孔
|
(AGRICULTURAL MACHINERY. AGRICULTURAL TRAILERS AND TRAILED EQUIPMENT. DRAWBAR JACKS.)
|
NF U23-110-2003
|
农用机械.泥浆槽罐车和喷撒装置.环保.喷撒精度的要求和试验方法
|
(Agricultural machinery - Slurry tankers and spreading devices - Environmental protection - Requirements and test methods for the spreading precision.)
|
NF X05-100-2003
|
图形符号.架空索道及滑动式人员运输车的使用标志
|
(Graphical symbols - Signs for the use of the ropeways and ski-lifts.)
|
NF X44-060-1993
|
空气净化设备.车切螺纹工业用带整体风扇的油中霉气的净化器.试验方法
|
(AIR CLEANING EQUIPMENT. OIL MUST GAS PURIFIERS WITH INTEGRAL FAN FOR SCREW-CUTTING INDUSTRY. TEST METHOD.)
|
NF X50-202-1989
|
道路车辆.特殊用途车辆.适用性能的技术评定
|
(ROAD VEHICLES. SECOND HAND PRIVATE CAR. TECHNICAL ASSESSMENT OF SUITABILITY FOR USE.)
|
NF X50-210-1992
|
小排量汽车故障修理.技术规范
|
(ACCIDENT REPAIR OF LIGHT VEHICLES. TECHNICAL SPECIFICATIONS.)
|
NF X50-765-1998
|
电信.由无线电电话安装工程技术人员交付使用的无线电电话和车载服务
|
(Telecommunications. Radiotelephone and car. Service delivered by the radiotelephone installation engineers.)
|
NF X50-805-2002
|
运输.后方勤务和服务站.公共乘客运输车.服务质量定义,目标和测量
|
(Transportation - Logistics and services - Public passenger transport - Service quality definition, targeting and measurement.)
|
NF X50-840-1995
|
旅行修理机构.轻型车辆的旅行修理.服务规范
|
(REPAIR-TOURING ACTIVITY. REPAIR-TOURING OF LIGHTWEIGHT VEHICLES. SERVICE SPECIFICATIONS.)
|
NF X50-841-1997
|
旅行修理机构.轻型车辆的旅行修理.设备和方法规范
|
(REPAIR-TOWING ACTIVITY. REPAIR-TOWING OF LIGHTWEIGHT VEHICLES. EQUIPMENT AND MEANS SPECIFICATIONS.)
|
NF Z84-761-1-2002
|
电磁兼容性和无线电频谱管理(ERM).短程装置.在2.45GHz频率范围内运行的铁路车辆的自动识别.第1部分:技术特
|
()
|
XP P99-071-2-1999
|
道路交通信号控制.控制者系列对话规范.车祸用最小侧面图的定义
|
(Road traffic signal control - Controller serial dialogue specification - Part 2 : definition of minimal profile DIASER use.)
|
XP X30-415-1999
|
废品.从自愿的观点对拒绝回收的车辆中包含的等量的废物和家庭样品的组成.选择性分类家庭废品部分
|
(Waste - Constitution of sample of household and equivalent waste contained in a refuse collection vehicle from voluntary voluntary points - Fraction of selectively sorted household waste.)
|
编号 |
中文名称 |
英文名称 |