编号 | 中文名称 | 英文名称 |
ASME B29.21M-1996 | 水、污水处理设备用700级焊接钢和铸造链,附件及链轮 | (700 class welded steel and cast chains, attachments and sprockets for water and sewage treatment plants) |
UL 1207-2001 | 危险场所用污水泵 | (Sewage pumps for use in hazardous (classified) locations ) |
UL 745-4-35-1995 | 由蓄电池供电的污水清洁器特殊要求 | (Particular requirements for battery-operated drain cleaners ) |
UL 745-2-35-1995 | 污水清洁器特殊要求 | (Particular requirements for drain cleaners ) |
ANSI/ASTM D5210-1992 | 测定在城市污水管污泥中塑料材料的厌氧生物降解的试验方法 | Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewer Sludge (08.03) |
ANSI/ASSE 1051-1998 | 污水管道系统用气体导入阀 | Air Admittance Valves for Plumbing Drainage Systems |
ANSI/ASTM D5271-1992 | 活化污泥污水处理系统中利用塑料材料的有氧生物降解的试验方法 | Test Method for Accessing the Aerobic Biodegradation of Plastic Materials in an Activated Sludge Wastewater-Treatment-System (08.03) |
ANSI/ASME A112.6.7-2001 | 瓷漆和环氧涂覆的铸铁和PVC塑料卫生底板污水池 | Enameled and Epoxy Coated Cast Iron and PVC Plastic Sanitary Floor Sinks |
ANSI/ASTM D3212-1996 | 软性人造橡胶密封的排污水塑料管连接件规范 | Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
ANSI/ASTM F1735-2002 | 修复现有的人可进入的污水管道用PVC衬里的聚氯乙烯(PVC)异型带材规范 | Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liner for Rehabilitation of Existing Man-Entry Sewers and Conduits |
ANSI/ASTM F1504-2002 | 现有污水管和下水管修复用波纹聚氯乙烯管规范 | Specification for Folded Poly (Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation |
ANSI/ASTM F810-2001 | 排水和污水处理吸收场用光壁聚乙烯(PE)管规范 | Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields |
ANSI/ASTM D2729-2003 | 聚氯乙烯(PVC)污水管及管配件规范 | Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
ANSI/ASTM D2661-2002 | 丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料排水管、污水管和通风管和配件规范.表40 | Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings |
ANSI/ASTM D2665-2002 | 聚氯乙烯(PVC)塑料排水管、污水管和通风管及配件规范 | Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings |
ANSI/ASME B29.21M-2003 | 水、污水处理设备用700等级的焊接钢和铸造链、连接件及链轮 | 700 Class Welded Steel and Cast Chains, Attachments, and Sprockets for Water and Sewage Treatment Plants |
ANSI/AWWA C500-2002 | 排水和污水系统闸门阀 | Gate Valves for Water and Sewage Systems |
ANSI/ASTM D5813-2004 | 现场固化的热固性树脂污水管规范 | Specification for Cured-in-place Thermosetting Resin Sewer Pipe |
ANSI/ASTM F1947-2004 | 折叠式聚氯乙烯管(PVC)装进现有污水管和下水管道中的实施规程 | Practice for Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits |
ANSI/ASTM F794-2003 | 基于受控内径的聚氯乙烯(PVC)异型重力沉降污水管及配件规范 | Specification for Poly (Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
ANSI/ASTM D3262-2004 | 增强塑料砂浆排污水管规范 | Specification for Reinforced Plastic Mortar Sewer Pipe (08.04) |
ANSI/ASTM D3754-2004 | 纤维玻璃污水管和工业用压力管规范 | Specification for Fiberglass Sewer and Industrial Pressure Pipe (08.04) |
ANSI/ASTM D2751-2005 | 丙烯腈-丁二烯-苯乙烯共聚物(ABS)污水管及配件的规范 | Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings |
ANSI/ASME A112.18.2-2005 | 卫生管道用污水管配件 | Plumbing Fixture Waste Fittings |
ANSI/NSF 40(i15)-2005 | 生活污水处理系统 | Residential Wastewater Treatment Systems |
ANSI/NSF 40(i14)-2005 | 生活污水处理系统 | Residential Wastewater Treatment Systems |
ANSI/NSF 40(i13r2)-2005 | 生活污水处理系统 | Residential Wastewater Treatment Systems |
ANSI/NSF 40(i16)-2005 | 生活污水处理系统 | Residential Wastewater Treatment Systems |
ANSI/ASTM D2321-2005 | 排污水和其它重力流动设备用热塑性管的地下安装实施规程 | Practice for Underground Installation of Thermoplastic Pipe for Sewers and other Gravity-Flow Applications |
ASTM F 585-1994 | 聚乙烯软管同现有污水管插接 | Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers |
ASTM F 1732-1996 | 聚氯乙烯(PVC)污水管和排水管包括回收PVC材料的标准规范 | Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material |
ASTM A 862/A 862M-1998 | 沥青覆层在波纹钢污水管和排水管上的应用的标准操作规程 | Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe |
ASTM C 913-2002 | 水和污水结构用预制混凝土标准规范 | Standard Specification for Precast Concrete Water and Wastewater Structures |
ASTM F 2233-2003 | 现有污水管中光纤网络的安全性、使用权限、建造、义务和风险管理的标准指南 | Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers |
ASTM C924M-1989 | 用低压空气试验法测试混凝土污水管的标准规程 | Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric) |
ASTM A 849-2000 | 波纹钢排水管和污水管用后涂覆铺面和衬里材料标准规范 | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe |
ASTM C 1053-2000 | 排水沟、污水沟和排出口用的硼硅酸盐玻璃管和配件的标准规范 | Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications |
ASTM A 746-2003 | 球墨铸铁污水管标准规范 | Standard Specification for Ductile Iron Gravity Sewer Pipe |
ASTM A 798/A 798M-2001 | 污水管及其它类似用途用工厂制波纹钢管安装的标准实施规程 | Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications |
ASTM D 2680-2001 | 丙烯腈-丁二烯-苯乙烯(ABS)和聚氯乙烯(PVC)共聚物污水管的标准规范 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
ASTM D 3212a-1996 | 使用弹性柔性密封料制的塑料排水管和污水管接头的标准规范 | Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals |
ASTM D 5271-2002 | 活性污泥-污水处理系统中测定塑料材料需氧生物降解能力的标准试验方法 | Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System |
ASTM A 807/A 807M-2002 | 生活污水管及其它类似用途安装波纹钢板结构管道的标准实施规范 | Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |
ASTM D 2661-2002 | 丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料排水管、污水管和通气管及其管件.附表40 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings |
ASTM D 4282-2002 | 用微扩散法测定水和污水中游离氰化物的标准试验方法 | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
ASTM C 969M-2002 | 安装的预制混凝土污水管道的表面渗入和渗出的验收检验的标准实施规程(米制) | Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric] |
ASTM C 969-2002 | 安装的预制混凝土污水管道的表面渗入和渗出的验收检验的标准实施规程 | Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines |
ASTM C 924M-2002 | 低压空气试验法测试混凝土污水管道标准实施规程(米制) | Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric) |
ASTM C 924-2002 | 低压空气试验法测试混凝土污水管道的标准实施规程 | Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method |
ASTM C 923M-2002 | 钢筋混凝土制检查孔、污水管和横向排水沟间弹性接头的标准规范(米制) | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals [Metric] |
ASTM C 923-2002 | 钢筋混凝土制检查孔、污水管和横向排水沟间弹性接头的标准规范 | Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes and Laterals |
ASTM F 1504-2002 | 现有污水管和下水管修复用折叠式聚氯乙烯管的标准规范 | Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation |
ASTM D 2729-2003 | 聚氯乙烯(PVC)污水管及配件标准规范 | Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
ASTM F 794-2003 | 以受控内径为基准的聚氯乙烯(PVC)异型重力污水管及配件的标准规范 | Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
ASTM D 5813-2004 | 现场硫化固定的热固性树脂污水管系统的标准规范 | Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems |
ASTM F 628-2006 | 有泡沫填充料的丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料雨水管、污水管和通风管道标准规范.表40 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core |
ASTM C 507Mb-2005 | 钢筋混凝土制椭圆形排水管、雨水管和污水管的标准规范(米制) | Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe [Metric] |
ASTM C 1478M-2003 | 加筋混凝土排暴雨污水结构、管道和横向排水沟间的暴雨排水沟弹性连接件标准规范 | Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals [Metric] |
ASTM C 564a-2003 | 铸铁污水管和配件用橡胶垫圈的标准规范 | Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings |
ASTM C 1103M-2003 | 已安装的预制混凝土污水管线的接头验收标准规程(米制) | Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric] |
ASTM C 1103-2003 | 已安装的预制混凝土污水管线的接头验收试验的标准规程 | Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines |
ASTM C 506a-2005 | 钢筋混凝土制拱形排水管、雨水管和污水管的标准规范 | Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe |
ASTM C 507a-2005 | 钢筋混凝土制椭圆形排水管、雨水管和污水管的标准规范 | Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe |
ASTM C 1540-2004 | 重型有套连接器连接无毂铸铁污水管道和管配件的标准规范 | Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings |
ASTM C 1111-2004 | 感应耦合等离子体原子发射光谱法测定污水流中元素的标准试验方法 | Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
ASTM D 3754-2004 | 玻璃纤维增强热固性树脂污水压力管和工业压力管的标准规范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
ASTM D 3262-2004 | 玻璃纤维增强热固性树脂污水管标准规范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
ASTM C 655M-2004 | 钢筋混凝土D型承重涵管、雨水管和污水管的标准规范(米制) | Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Metric] |
ASTM C 655-2004 | 钢筋混凝土D型承重涵管、雨水管和污水管的标准规范 | Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe |
ASTM C 985M-2004 | 规定强度的无钢筋混凝土涵管、雨水管和污水管(米制)的标准规范 | Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe [Metric] |
ASTM C 506Ma-2005 | 钢筋混凝土制拱形排水管、雨水管和污水管的标准规范(米制) | Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe [Metric] |
ASTM F 949a-2006 | 光滑内壁聚氯乙烯(PVC)波纹污水管和配件的标准规范 | Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings |
ASTM D 3034-2006 | PSM型聚氯乙烯(PVC)污水管和配件的标准规范 | Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
ASTM C 1563-2004 | 卫生排水、废弃物、通风和暴雨管设施用与衬套窝接式铸铁污水管和配件相连接用垫圈的标准试验方法 | Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications |
ASTM C 1417M-2004 | 直接设计的钢筋混凝土污水管、雨水管和涵管的生产标准规范(米制) | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
ASTM C 1417-2004 | 直接设计的钢筋混凝土污水管、雨水管和涵管的生产标准规范 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design |
ASTM C 985-2004 | 规定强度的无钢筋混凝土涵管、雨水管和污水管的标准规范 | Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe |
ASTM F 2414-2004 | 用化学灌浆密封污水道检查孔的标准规程 | Standard Practice for Sealing Sewer Manholes Using Chemical Grouting |
ASTM D 2751-2005 | 丙烯腈-丁二烯-苯乙烯共聚物(ABS)污水管和配件的标准规范 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings |
ASTM A 888-2005 | 污水、雨水、废物和通风管道用无凸口铸铁污水管及配件的标准规范 | Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications |
ASTM C 1244a-2005 | 回填之前利用负压(真空)试验的混凝土污水管检查孔的标准试验方法 | Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill |
ASTM C 76Mb-2005 | 钢筋混凝土制涵管、雨水管和污水管的标准规范(米制) | Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric] |
ASTM C 428-2005 | 石棉水泥无压污水管道的标准规范 | Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe |
ASTM C 32-2005 | 污水管和人孔用砖(粘土或页岩制)的标准规范 | Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale) |
ASTM F 679-2006 | 大直径聚氯乙烯(PVC)塑料重力污水管和配件的标准规范 | Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings |
UL 1086-1996 | 家用垃圾压实器 | (Household trash compactors ) |
ANSI/NSF 21-1996 | 热塑性塑料垃圾容器 | Thermoplastic Refuse Containers |
ANSI/NSF 13-2001 | 垃圾压实器和压实系统 | Refuse Compactors and Compactor Systems |
ANSI/NSF 13(i2)-2005 | 垃圾处理机和处理系统 | Refuse processors and processing systems |
ANSI/UL 1086-2005 | 家用垃圾压实器的安全标准 | Standard for Safety for Household Trash Compactors |
ANSI Z245.1-1999 | 垃圾的收集、处理和处置设备.移动式垃圾收集和压实设备.安全要求 | Refuse Collection, Processing, and Disposal Equipment - Mobile Refuse Collection and Compaction Equipment - Safety Requirements |
ANSI Z245.30-1999 | 垃圾的收集、处理和处置设备.垃圾箱.安全要求 | Refuse Collection, Processing, and Disposal Equipment - Waste Containers - Safety Requirements |
ANSI Z245.60-1999 | 垃圾收集、处理和处置设备.垃圾箱.兼容尺寸 | Refuse Collection, Processing, and Disposal Equipment - Waste Containers - Compatibility Dimensions |
ASTM D 6523-2000 | 垃圾堆积场的代用日掩盖物的评价和选定的标准指南 | Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills |
编号 | 中文名称 | 英文名称 |