德国垃圾和污水处理标准(DIN)

ASME | BS | DIN | EN | GB | ISO | JIS | NF |  DIC
返回

编号中文名称英文名称
DIN 38414-13-1992德国检验水、废水和污泥的标准方法.污泥和沉积物(S组).已消毒的污水过滤后的污泥中沙门氏菌属的检测(S13)German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); detection of salmonellae in disinfected sewage sludge (S 13)
DIN 2425-4-1980水源和远程管线的市政公用设施设计图.公共污水系统用污水管网图Plans for Public Utilities, Water Resources and Long-distance Lines; Sewer Network Drawings of Public Sewerage Systems
DIN 19667-1991废碴埋填的污水排放管道系统.设计、建造和使用Drainage of landfills; code of practice for design, construction and operation
DIN 38412-31-1989德国检验水、废水和污泥的标准方法.水有机物试验方法.生物测定(L组):采用(L 31)稀释法测定鱼类对污水毒性的German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of fish to the toxicity of waste water by way of a dilution series (L 31)
DIN 4263-1991给排水工程的污水管、排水管和管道的形状、尺寸和几何值Shapes, dimensions and geometrical values of sewers, drains and pipelines for water and waste water engineering
DIN 19850-1-1996污水管道用纤维水泥管和配件件.第1部分:管,支管和弯头尺寸Fibre cement pipes and fittings for sewers - Part 1: Dimensions of pipes, branches and bends
DIN EN 588-1-1996纤维水泥污水管.第1部分:重力系统用管、连接件和配件Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems; German version EN 588-1:1996
DIN EN 1306-1996内河航运船只.污水排放接头Inland navigation vessels - Connections for the discharge of waste water; German version EN 1306:1996
DIN 86282-1995船舶用污水系统.国际排污连接用法兰Sewage systems on ships - Flanges for international discharge connections
DIN EN 295-4-1995排水和污水用陶土管和配件及管接头.第4部分:专用配件、转换接头和相容附件的要求Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements for special fittings, adapters and compatible accessories; German version EN 295-4:1995
DIN EN 295-6-1995陶土污水管.配件及管连接件.第6部分:陶土井筒要求Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 6: Requirements for vitrified clay manholes; German version EN 295-6:1995
DIN EN 295-7-1995陶土污水管.配件及管连接件.第7部分:陶土管和管接头前移要求Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 7: Requirements for vitrified clay pipes and joints for pipe jacking; German version EN 295-7:1995
DIN 19850-2-1996纤维水泥污水管和接头.第2部分:接头尺寸Fibre cement pipes and fittings for sewers - Part 2: Dimensions of joints
DIN EN 295-5-1999雨水和污水排放陶土管、配件和管连接件.第5部分:编织管和配件的要求(包括修改件A1:1999)Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 5: Requirements for perforated vitrified clay pipes and fittings (includes Amendment A1:1999); German version EN 295-5:1994 + A1:1999
DIN EN 476-1997自流雨水和污水管道构件通用要求General requirements for components used in discharge pipes, drains and sewers for gravity systems; German version EN 476:1997
DIN 86284-1997饮用水、灭火水、污水、油和含油混合剂的输送和接受用管接头类型.概要Types of joints for disposal and refuelling of drinking water, fire fighting water, sewage, oil and oily mixtures - Synopsis
DIN EN 1610 Bb.1-1997排水和污水管道的铺设和检验.相关标准和规范的目录Construction and testing of drains and sewers - List of relevant standards and guidelines (status as of 1997-02)
DIN 4060-1998带弹性密封件的下水道和污水管用接头.对弹性密封件的接头的要求和试验Joints of sewer and drain pipes with elastomeric seals - Requirements and testing on joints with elastomeric seals
DIN EN 752-6-1998建筑物外部排水和污水系统.第6部分:泵设备Drain and sewer systems outside buildings - Part 6: Pumping installations; German version EN 752-6:1998
DIN EN 752-7-1998建筑物外部排水和污水系统.第7部分:维护和使用Drain and sewer systems outside buildings - Part 7: Maintenance and operations; German version EN 752-7:1998
DIN EN 1401-1-1998非压力地下排水和污水用塑料管道系统.硬聚氯乙烯(PVC-V).第1部分:管、管件和系统规范Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specification for pipes, fittings and the system; German version EN 1401-1:1998
DIN EN 295-3-1999雨水和污水排放陶土管,配件及管连接件.第3部分:试验方法(包括修改件A1:1998)Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 3: Test methods (includes amendment A1:1998); German version EN 295-3:1991 + A1:1998
DIN 19569-7-1999污水处理厂.建筑结构和技术设备的设计原理.第7部分:人类污物接收站Sewage treatment plants - Principles for the design of structures and technical equipment - Part 7: Station for the transfer of faecal sewage
DIN EN 295-1-1999陶土污水管.配件及管连接件.第1部分:要求(包括修改件A1:1996,修改件A2:1996和修改件A3:1999)Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements (includes Amendment A1:1996, Amendment A2:1996 and Amendment A3:1999); German version EN 295-1:1991 + A1:1996 + A2:1996 + A3:1999
DIN EN 295-2-1999陶土污水管.配件件及管连接件.第2部分:质量控制和取样Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 2: Quality control and sampling (includes Amendment A1:1999); German version EN 295-2:1991 + A1:1999
DIN EN 752 Bb.1-1999建筑物外的污水和排放系统.索引Drain and sewer systems outside buildings - Index
DIN 19531-10-1999建筑物污水和污物排放系统用未增塑聚氯乙烯(PVC-U)套管道和配件.第10部分:燃烧性能、质量控制和安装的推荐Pipes and fittings made of unplasticized polyvinyl chloride (PVC-U) socket for waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations
DIN 19538-10-1999建筑物内耐热污水和污物排放系统用氯化的聚氯乙烯(PVC-C)管道和配件.第10部分:燃烧性能、质量控制和安装的Pipes and fittings made of chlorinated polyvinyl chloride (PVC-C) for hot-water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations
DIN EN 1329-1-1999建筑物污物和污水排放(低温和高温)用塑料管道系统.未增塑聚氯乙烯(PVC-U).第1部分:管道、配件和系统规范;Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system; German version EN 1329-1:1999
DIN EN 12255-5-1999污水处理厂.第5部分:污泥储留池法Wastewater treatment plants - Part 5: Lagooning processes; German version EN 12255-5:1999
DIN V ENV 1852-2-2000非压力地下排水和污水用塑料管道系统.聚丙烯.第2部分:一致性评估指南Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity; German version ENV 1852-2:2000
DIN EN 295 Bb.1-2000污水排放用陶土管和配件以及管连接件.标准和其它文献总目Vitrified clay pipes and fittings and pipe joints for drains and sewers - Survey on standards and other documents
DIN EN 12889-2000排水管和污水管非埋设施工和试验Trenchless construction and testing of drains and sewers; German version EN 12889:2000
DIN 19534-3-2000非压力地下排水和污水排放用带环形密封承口的硬聚氯乙烯(PVC-U)管和管件.第3部分:质量控制和安装Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) with ring seal socket for non pressure underground drainage and sewerage - Part 3: Quality control and installation
DIN V ENV 1401-2-2000非压力地下排水和污水管道用塑料管道系统.硬聚氯乙烯(PVC-U).第2部分:一致性评估指南Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity; German version ENV 1401-2:2000
DIN 18306-2000建筑工程承包条例.第C部分:建筑工程通用技术规范.污水工程Contract procedures for building works - Part C: General technical specifications for building works; Sewage channel works
DIN 19569-10-2001污水处理厂.结构和技术设备设计原理.第10部分:热污泥干燥设备特定原理Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 10: Specific principles for the equipment for thermal sludge drying
DIN EN 12255-10-2001污水处理厂.第10部分:安全性原则Wastewater treatment plants - Part 10: Safety principles; German version EN 12255-10:2000
DIN EN 12255-3-2001污水处理厂.第3部分:预处理(包括技术勘误AC-2000)Wastewater treatment plants - Part 3: Preliminary treatment (includes corrigendum AC:2000); German version EN 12255-3:2000 + AC:2000)
DIN 1986-4-2003专用地段排水系统.第4部分:不同材料污水管和配件的应用范围Drainage systems on private ground - Part 4: Fields of application of sewage pipes and fittings of different materials
DIN EN 12255-8-2001污水处理厂.第8部分:污泥处理和储存Wastewater treatment plants - Part 8: Sludge treatment and storage; German version EN 12255-8:2001
DIN EN 12255-1-2002污水处理厂.第1部分:通用施工原则Wastewater treatment plants - Part 1: General construction principles; German version EN 12255-1:2002
DIN EN 12255-4-2002污水处理厂.第4部分:初次澄清Wastewater treatment plants - Part 4: Primary settlement; German version EN 12255-4:2002
DIN EN 12255-6-2002污水处理厂.第6部分:活性污泥处理Wastewater treatment plants - Part 6: Activated sludge process; German version EN 12255-6:2002
DIN EN 12255-7-2002污水处理厂.第7部分:生物固定薄膜反应器Wastewater treatment plants - Part 7: Biological fixed-film reactors; German version EN 12255-7:2002
DIN V ENV 1046-2002塑料管道系统.输送水或污水用建筑结构外部系统.地上和地下安装惯例Plastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for installation above and below ground; German version ENV 1046:2001
DIN EN 12255-9-2002污水处理厂.第9部分:气味控制和通风Wastewater treatment plants - Part 9: Odour control and ventilation; German version EN 12255-9:2002
DIN 4261-1-2002小型污水处理厂.第1部分:废水预处理厂Small sewage treatment plants - Part 1: Plants for waste water pretreatment
DIN EN 1852-1-2003无压地下排水和污水塑料管道系统.聚丙烯(PP).第1部分:管、配件和系统规范Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system (includes amendment A1:2002); German version EN 1852-1:1997 + A1:2002
DIN EN 12255-15-2004污水处理厂.第15部分:活性污泥厂的曝气槽清水中氧气转化的测量Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants; German version EN 12255-15:2003
DIN CEN/TS 13244-7-2003通用、排水和污水用地下和地上压力系统用塑料管道系统.聚乙烯.第7部分:合格评定指南Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity; German version CEN/TS 13244-7:2003
DIN V 4034-1-2004排水和污水用未加筋的、钢纤维和加筋的预制混凝土人孔.1型和2型.第1部分:要求、试验方法和合格评定Prefabricated concrete manholes, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Part 1: Requirements, test methods and evaluation of conformity
DIN EN 1123-1-2004污水系统用带套管和孔座的纵向焊接热浸镀锌钢管及配件.第1部分:要求、检验和质量控制Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1123-1:1999 + A1:2004
DIN EN 1124-1-2004污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第1部分:要求、检验和质量控制Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1124-1:1999 + A1:2004
DIN EN 12255-14-2004污水处理厂.第14部分:消毒Wastewater treatment plants - Part 14: Disinfection; German version EN 12255-14:2003
DIN 19569-9-2004废水处理厂.结构和技术设备的设计原则.第9部分:污水污泥的机械排放Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 9: Mechanical drainage of sewage sludge
DIN 19569-11-2004污水处理厂.结构和技术设备设计原理.第11部分:间歇操作装置Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 11: Dosing plant
DIN V 1201-2004排水和污水用未加筋的、钢纤维的和加筋的混凝土管和配件.1型和2型.要求、试验方法和合格评定Concrete pipes and fittings, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Requirements, test methods and evaluation of conformity
DIN EN 295-10-2005排水和污水管道用陶土管、配件及管连接件.第10部分:性能要求Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Performance requirements; German version EN 295-10:2005
DIN EN 1124-4-2005污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第4部分:真空排水系统和船用排水系统用元件Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships; German version EN 1124-4:2005
DIN EN 14758-1-2006无压地下排水和污水塑料管道系统.有矿物调节剂的聚丙烯(PP-MD)管道系统.第1部分:管、管件和系统规范.德文版Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system; German version EN 14758-1:2005
DIN 19569-8-2005污水处理厂.结构和技术设备设计原则.第8部分:粒状介质过滤器和粒状固定台过滤器中污水处理用设备的具体原则Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 8: Specific principles for the equipment for sewage treatment in granular media filter and granular fixed bed filter
DIN-Fachbericht CEN/TR 15128-2005排水和污水系统的修复用欧洲标准的调查Survey of European Standards for rehabilitation of drain and sewer systems; German version CEN/TR 15128:2005
DIN EN 12566-3-2005高达50PT的小型废水处理系统.第3部分:整装的和/或现场装配的家用污水处理设备Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants; German version EN 12566-3:2005
DIN CEN/TS 12666-2-2006非压力地下排水和污水管道用塑料管道系统.聚丙烯(PE).第2部分:一致性评估指南.德文版本CEN/TS 12666-2-2005Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 12666-2:2005
DIN EN 12255-16-2005污水处理厂.第16部分:物理(机械)过滤法.德文版本 EN 12255-16-2005Wastewater treatment plants - Part 16: Physical (mechanical) filtration; German version EN 12255-16:2005
DIN EN 1124-1 Berichtigung 1-2006污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第1部分:要求、试验和质量控制Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1124-1:1999 + A1:2004, Corrigenda to DIN EN 1124-1:2004-12
DIN 55465-2-1992垃圾用纸或聚乙烯薄膜包装材料.标称容量50公升以下的袋子.形状、尺寸、要求、检验Packaging made from paper or polyethylene for waste; bags with a nominal capacity up to 50 l, shapes, dimensions, requirements, tests
DIN 30741-1-1992垃圾箱.特殊固体垃圾用容积为800升的垃圾箱Garbage containers; garbage containers for special wastes; with a capacity 800 l for solid special wastes
DIN 30741-2-1992垃圾箱.专用废物垃圾箱.液体特殊废料用容积为1000升的垃圾箱Garbage containers; garbage containers for special wastes; with a capacity 1000 l for liquid special wastes
DIN 30743-1995废弃物处理工程.专用垃圾箱的存放和运输用装载辅助装置Waste disposal engineering - Loading aid for the storage and transportation of waste containers for special wastes
DIN 30742-1-1995废弃物处理工程.液体和固体的专用垃圾箱.第1部分:金属材料制容积为 60 升 - 240 升的垃圾箱Waste disposal engineering - Waste containers for liquid and solid special waste - Part 1: Containers with a capacity from 60 l to 240 l made from metal material
DIN 30730-1995移动式垃圾压装机.拆卸式翻斗车和滚动翻斗车.要求、连接尺寸Mobile waste packer - Multi-bucket system vehicles and roller contact tippper vehicles; requirements, connection dimensions
DIN EN 474-11-1998土方机械.安全性.第11部分:垃圾压缩机要求Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors; German version EN 474-11:1998
DIN 30731-2001垃圾收集车.后倾翻倒装置接口条件Refuse collection vehicles - Interface conditions for rear-end loaded refuse collection vehicles
DIN 30760-2001移动式垃圾箱.带金刚石提升设备的80-360l升双轮垃圾箱Mobile waste containers - Waste containers with two wheels with a capacity from 80 l to 360 l for diamond lifting devices
DIN 30719-2002容积500-1300升的垃圾箱外罩Container storage shell for waste containers with a capacity from 500 l to 1300 l
DIN 30736-2002容积390升的垃圾箱外罩Container storage shell for waste containers with a capacity to 390 l
DIN EN 13071-2002分类垃圾收集箱.分类垃圾收集用容积为80升-5000升地面的机械式升降垃圾箱; 德文版本 EN 13071:2002Selective waste collection containers - Above-ground mechanically-lifted containers with capacities for 80 l to 5000 l for selective collection of waste; German version EN 13071:2002
DIN 30737-2003垃圾葙.带开盖设备和提升装置容积为2.5m3和5m3的活动倾倒垃圾箱Waste containers - Mobile discharge system containers with hinged lid with capacities 2,5 m<(hoch)3> and 5 m<(hoch)3> for lifting devices with lid opener device
DIN 30733-2005垃圾收集车用踏板及其固定Footboards and their fixation at refuse collection vehicles
DIN EN 1501-1-2004垃圾收集车及其相关提升装置.一般要求和安全要求.第1部分:尾部装载垃圾收集车Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 1: Rear-end loaded refuse collection vehicles; German version EN 1501-1:1998 + A1:2004
DIN EN 12574-2-2006固定式垃圾箱.第2部分:性能要求和试验方法Stationary waste containers - Part 2: Performance requirements and test methods; German version EN 12574-2:2006
DIN EN 12574-1-2006固定式垃圾箱.第1部分:套管、双向套管或袋状升降装置用带扁盖或圆盖的容量为1700-5000升的垃圾箱.尺寸和设Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design; German version EN 12574-1:2006
DIN EN 1501-2-2005垃圾收集车及相关提升装置.一般要求和安全要求.第2部分:侧面装载的垃圾收集车Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles; German version EN 1501-2:2005
DIN EN 12574-3-2006固定式垃圾箱.第3部分:安全和卫生要求Stationary waste containers - Part 3: Safety and health requirements; German version EN 12574-3:2006
DIN 30727-1987垃圾收集汽车.禁令牌和指示标签Refuse vehicles; prohibition plates and indicating labels
编号中文名称英文名称

返回
程序 | 样本HTML文件