| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI A224.1-1990
| 钢门和门框涂底漆的钢材表面的试验程序和验收标准
| Test procedure and acceptance criteria for prime painted steel surfaces for steel doors and frames
|
| ANSI A250.10-1998
| 钢门和门框的钢表面底漆的试验程序和验收标准
| Steel Surfaces for Steel Doors and Frames, Test Procedure and Acceptance Criteria for Prime Painted
|
| ANSI A250.3-1999
| 工厂用钢门和门框的钢表面饰面漆的试验程序和验收标准
| Test Procedure and Acceptance Criteria for Factory-Applied Finish Painted Steel Surfaces for Steel Doors and Frames
|
| ANSI A250.4-2001
| 钢门和五金加强件的物理耐久性的试验程序和验收标准
| Test Procedure and Acceptance Criteria for Physical Endurance for Steel Doors and Hardware Reinforcings
|
| ANSI/ASAE S522.1 (ISO 5674-2004)-2005
| 农林用拖拉机和机械.动力输出轴护罩.强度和磨损试验及验收标准
| Tractors and machinery for agricultural and forestry - Guards for power take-off (PTO) drive shafts - Strength and wear tests and acceptance criteria
|
| ANSI/ASME B1.3M-1992
| 英制和米制(UN, UNR,UNJ, M, and MJ)螺纹的尺寸验收用测量系统
| Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
|
| ANSI/ASTM D585-1997
| 单批纸、纸板、纤维纸板和相关产品的取样和验收惯例
| Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Products
|
| ANSI/ASTM E141-1997
| 根据概率取样结果进行数据验收的惯例
| Practice for Acceptance of Evidence Based on the Results of Probability Sampling
|
| ANSI/ASTM F1417-1996
| 使用低压空气对塑料自流排水管道进行安装验收的试验方法
| Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low Pressure Air
|
| ANSI/ASTM F940-2000
| 海上建筑物及造船用保护性涂料的质量控制验收检验程序的标准操作规程
| Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
|
| ANSI/AWS C2.21M/C 2.21-2003
| 热喷涂设备验收检验规范
| Specification for Thermal Spray Equipment Acceptance Inspection
|
| ANSI/EIA 276-A-1980
| 电动扬声器的动态验收检验
| Loudspeakers, Acceptance Testing of Dynamic
|
| ANSI/EIA 555-1988
| 验证符合规定质量等级（PPM）批量验收程序
| Lot Acceptance Procedure for Verifying Compliance with the Specified Quality Level (SQL) in PPM
|
| ANSI/EIA 584-1991
| 按连续制造过程的属性进行检验用零验收数取样的程序和表格
| Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of a Continuous Manufacturing Process
|
| ANSI/EIA 585-1991
| 按隔批属性进行检验用零验收数取样的程序和表格
| Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots
|
| ANSI/EIA-555-1988
| 验证符合规定质量水平(SQL)PPM量级的批量验收程序
| Lot Acceptance Procedure for Verifying Compliance with the Specified Quality Level (SQL) in PPM
|
| ANSI/IEEE C57.106-2002
| 设备绝缘油验收和维护指南
| Guide for Acceptance and Maintenance of Insulating Oil in Equipment
|
| ANSI/IEEE C57.111-1995
| 硅绝缘液体验收指南和在变压器中的维护
| Guide for Acceptance of Silicone Insulating Fluid and Its Maintenance in Transformers
|
| ANSI/IESNA LM-73-2004
| 使用白炽灯或者高强度放电灯的娱乐照明灯具的光度试验的IESNA验收方法
| IESNA Approved Method for Photometric Testing of Entertainment Lighting Luminaires Using Incandescent Filament Lamp or High Intensity Discharge Lamps
|
| ANSI/IPC WHMA-A-620-2002
| 电缆和导线护皮组件的要求和验收
| Requirements and Acceptance for Cable and Wire Harness Asssemblies
|
| ANSI/NCCLS GP17-A 2-2004
| 临床实验室安全.验收导则
| Clinical Laboratory Safety; Approved Guideline
|
| ANSI/NFPA 140-2004
| 移动图片和电视制作工作室发声场所和已验收的防护设备
| Motion Picture and Television Production Studio Soundstages and Approved Protection Facilities
|
| ANSI/RIA R15.05-3-1992
| 工业机器人和自动控制系统.可靠性验收试验.指南
| Industrial Robots and Robot Systems - Reliability Acceptance Testing - Guidelines
|
| ANSI/RVIA UPA-1-2000
| 统一计划验收
| Uniform Plan Approval
|
| ANSI/SCTE 25-4-2002
| 混合光纤/同轴电缆室外状态监视.第4部分:发射机应答器接口验收试验用HMS电源
| Hybrid Fiber/Coax Outside Plant Status Monitoring Part 4: HMS Power Supply to Transponder Interface Acceptance Test
|
| ASME N45.2.6-1978
| 核电厂的检验,验收和测试人员的资格鉴定
| (Qualifications of inspection, examination, and testing personnel for nuclear power plants)
|
| ASTM A 802/A 802M-1995
| 钢铸件外观检验的表面验收标准的标准操作规程
| Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
|
| ASTM A 903/A 903M-1999
| 钢铸件磁性粒子和液体渗透检验的表面验收标准的标准规范
| Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
|
| ASTM A 997-1998
| 熔模铸件表面验收标准外观检验的标准实施规程
| Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
|
| ASTM C 1010-1983
| 核燃料再加工设备的验收、检测和操作前试验
| Acceptance, Checkout and Pre-Operational Testing of a Nuclear Fuels Reprocessing Facility
|
| ASTM C 1103-2003
| 已安装的预制混凝土污水管线的接头验收试验的标准规程
| Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
|
| ASTM C 1103M-2003
| 已安装的预制混凝土污水管线的接头验收标准规程(米制)
| Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
|
| ASTM C 929-1994
| 奥氏体不锈钢上用绝热材料的加工、运输、海运、贮藏、验收和应用的标准实施规程
| Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
|
| ASTM C 969-2002
| 安装的预制混凝土污水管道的表面渗入和渗出的验收检验的标准实施规程
| Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
|
| ASTM C 969M-2002
| 安装的预制混凝土污水管道的表面渗入和渗出的验收检验的标准实施规程(米制)
| Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
|
| ASTM D 4418-2000
| 燃气轮机用燃料的验收、贮存和搬运的标准操作规程
| Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
|
| ASTM D 4678-2004
| 橡胶的标准规程.标准物质的制备、试验、验收、文献工作和使用
| Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
|
| ASTM D 585-1997
| 纸张、纸板、纤维板和相关产品的单批取样和验收标准实施规程
| Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
|
| ASTM D 6346-1998
| 通过家庭有害废物处理收集的验收,隔离和包装材料的标准指南
| Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs
|
| ASTM E 141-1991
| 根据概率取样结果所得数据验收的标准实施规范
| Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
|
| ASTM E 2427-2005
| 用美国标准试验筛的性能测试进行验收用标准试验方法
| Standard Test Method for Acceptance by Performance Testing of U.S. Standard Test Sieves |
| ASTM F 1417-1992
| 使用低压空气对塑料自流排水管道安装验收方法
| Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
|
| ASTM F 2242-2005
| 动力伞降飞行器的生产验收试验系统的标准规范
| Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft
|
| ASTM F 2356a-2005
| 轻于空气的轻型运动飞机的产品验收试验系统的标准规范
| Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft
|
| ASTM F 2447-2005
| 重量转移控制飞行器的生产验收试验程序的标准实施规程
| Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft
|
| ASTM F 940-1999
| 海上建筑物及造船用保护性涂料的质量控制验收检验程序的标准操作规程
| Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
|
| 编号 | 中文名称 | 英文名称 |
|---|