| 编号 | 中文名称 | 英文名称 |
|---|
| EN 12266-1-2003
| 工业阀门 阀门试验 第1部分：压力试验、试验程序和验收标准、强制要求
| Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria; Mandatory requirements
|
| EN 12266-2-2002
| 工业阀门 阀门试验 第2部分：试验、试验程序和验收标准 补充要求
| Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements
|
| EN 12484-4-2002
| 灌溉技术 自动草坪灌溉系统 第4部分：验收和安装
| Irrigation techniques - Automatic turf irrigation systems - Part 4: Installation and acceptance
|
| EN 12517-1998
| 焊缝的无损检验 焊接接头放射线检验 验收等级
| Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels
|
| EN 1289-1998+A1-2002
| 焊接的无损检验 焊接的熔深试验 验收等级
| Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels
|
| EN 1291-1998+A1-2002
| 焊接的无损检验 焊接的磁性粒子试验 验收等级
| Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels
|
| EN 12952-15-2003
| 水管锅炉及附属设备 第15部分：验收试验
| Water-tube boilers and auxiliary installations - Part 15: Acceptance tests
|
| EN 12953-11-2003
| 壳式锅炉 第11部分：验收试验
| Shell boilers - Part 11: Acceptance tests
|
| EN 13121-1-2003
| 地上使用的GRP罐和容器 第1部分：原材料 验收条件和规格条件
| GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions
|
| EN 1317-2-1998
| 道路防护系统 第2部分：安全屏障的性能等级、碰撞试验、验收标准和试验方法
| Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers
|
| EN 1317-2/prA1-2002
| 道路防护系统 第2部分：安全屏障的性能等级、碰撞试验、验收标准和试验方法 修改A1
| Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers; Amendment A1
|
| EN 1317-3-2000
| 道路防护系统 第3部分：碰撞防护垫的性能等级、碰撞试验、验收标准和试验方法
| Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions
|
| EN 1395-1996
| 热喷涂 热喷涂设备的验收检验
| Thermal spraying - Acceptance inspection of thermal spraying equipment
|
| EN 13975-2003
| 体外诊断用医疗设备验收试验的取样方法 统计法
| Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects
|
| EN 1712-1997
| 焊接无损检验 焊接接头超声波检测 验收水平
| Non destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels
|
| EN 28206-1992
| 氧气切割机的验收试验 重复精度 工作特性
| Acceptance tests for oxygen cutting machines- Reproducible accuracy- Operational characteristics (ISO 8206:1991)
|
| EN 60041-1994
| 测定水轮机、蓄能泵和水泵-水轮机水力性能的现场验收试验
| Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines (IEC 60041:1991, modified) |
| EN 60193-1999
| 水轮机、蓄能泵和水泵水轮机 模型验收试验
| Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests (IEC 60193:1999)
|
| EN 60383-1-1996+A11-1999
| 标称电压1KV以上的架空线用绝缘子 第1部分：交流系统用陶瓷或玻璃绝缘子单元定义、试验方法和验收准则
| Insulators for overhead lines with a nominal voltage above 1 kV - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria (IEC 60383-1:1993)
|
| EN 60383-2-1995
| 标称电压高于1000V以上的架空线路用绝缘子 第2部分：交流电路系统绝缘子串和绝缘子组 定义、试验方法和验
| Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria (IEC 60383-2:1993)
|
| EN 60514-1995
| 2级交流电度表的验收方法
| Acceptance inspection of class 2 alternating-current watthour meters (IEC 60514:1975, modified)
|
| EN 60953-1-1995
| 汽轮机热力验收试验规范 第１部分：方法Ａ 适用于大容量凝汽式汽轮机的高精度规范
| Rules for steam turbine thermal acceptance tests - Part 1: Method A - High accuracy for large condensing steam turbines (IEC 60953-1:1990)
|
| EN 60953-2-1995
| 汽轮机热力验收试验规范 第２部分：方法Ｂ 适用于各种类型和容量汽轮机的较宽精度和规范
| Rules for steam turbine thermal acceptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines (IEC 60953-2:1990)
|
| EN 60953-3-2002
| 汽轮机热力验收试验规范 第３部分：
| Rules for steam turbine thermal acceptance tests - Part 3: Thermal performance verification tests of retrofitted steam turbines (IEC 60953-3:2001)
|
| EN 61064-1993
| 汽轮机速度控制系统验收试验
| Acceptance tests for steam turbine speed control systems (IEC 61064:1991)
|
| EN 61223-3-1-1999
| 医用成像部门的评定及例行试验 第3-1部分：验收试验 X-射线摄影和X射线透视设备的图像性能
| Evaluation and routine testing in medical imaging departments - Part 3-1: Acceptance tests - Imaging performance of X-ray equipment for radiographic and radioscopic systems (IEC 61223-3-1:1999)
|
| EN 61223-3-2-1996
| 医用成像部门的评定及例行试验 第3-2部分：验收试验 乳腺摄影X-射线设备图像性能
| Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:1996)
|
| EN 61223-3-3-1996
| 医用成像部门的评定及例行试验 第3-3部分：验收试验 数字减影血管造影X-射线设备的图像性能
| Evaluation and routine testing in medical imaging departments - Part 3-3: Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiography (DSA) (IEC 61223-3-3:1996)
|
| EN 61223-3-4-2000
| 医用成像部门的评定及例行试验 第3-4部分：验收试验 牙科X射线设备的图像性能
| Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance test- Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000)
|
| EN 61325-1995
| 标称电压1000V以上的架空线用绝缘子 直流系统用陶瓷或玻璃绝缘子单元 定义、试验方法和验收准则
| Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria (IEC 61325:1995)
|
| EN 61358-1996
| 直接接入静止式交流有功瓦时计(1级和2级)的验收检验
| Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2) (IEC 61358:1996)
|
| EN 818-1-1996+AC-1996
| 提升用短节链条 安全 第1部分：一般验收条件
| Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance
|
| EN ISO 10360-1-2000+AC-2002
| 产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第1部分：词汇
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000)
|
| EN ISO 10360-2-2001
| 产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第2部分：所用的坐标测量机械或测量尺寸
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used or measuring size (ISO 10360-2:2001)
|
| EN ISO 10360-3-2000
| 产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第3部分：旋转台的轴线作为第四轴线的坐标测
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with a axis of a rotary table as the fourth axis (ISO 10360-3:2000)
|
| EN ISO 10360-4-2000+AC-2002
| 产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第4部分：用于扫描型坐标机
| Geometrical Product Specifications (GPS) - Aceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode (ISO 10360-4:2000)
|
| EN ISO 10360-5-2000
| 产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第5部分：使用多触针探测系统的坐标测量机
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using multiple-stylus probing systems (ISO 10360-5:2000)
|
| EN ISO 10360-6-2001
| 产品几何量技术规范(GPS) 坐标测量机(CMM)的验收和复检试验 第6部分：计算高斯相关特性中误差的评估
| Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001)
|
| EN ISO 10545-1-1997
| 陶瓷砖 第1部分：抽样和验收条件
| Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:1995)
|
| EN ISO 11546-2-1995
| 声学 隔声罩隔声性能的测定 第2部分：现场测量(验收和鉴定用)
| Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
|
| EN ISO 14744-1-2000
| 焊接 电子束焊接机的验收检验 第1部分：原理和验收条件
| Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2000)
|
| EN ISO 14744-2-2000
| 焊接 电子束焊接机的验收检验 第2部分：加速电压特性的测量
| Welding - Acceptance inspection of electron beam welding machines - Part 2: Measurement of accelerating voltage characteristics (ISO 14744-2:2000)
|
| EN ISO 14744-3-2000
| 焊接 电子束焊接机的验收检验 第3部分：电子束电流特性的测量
| Welding - Acceptance inspection of electron beam welding machines - Part 3: Measurement of beam current characteristics (ISO 14744-3:2000)
|
| EN ISO 14744-4-2000
| 焊接 电子束焊接机的验收检验 第4部分：焊接速度的测量
| Welding - Acceptance inspection of electron beam welding machines - Part 4: Measurement of welding speed (ISO 14744-4:2000)
|
| EN ISO 14744-5-2000
| 焊接 电子束焊接机的验收检验 第5部分：偏转精度的测量
| Welding - Acceptance inspection of electron beam welding machines - Part 5: Measurement of run-out accuracy (ISO 14744-5:2000)
|
| EN ISO 14744-6-2000
| 焊接 电子束焊接机的验收检验 第6部分：焊点位置稳定性的测量
| Welding - Acceptance inspection of electron beam welding machines - Part 6: Measurement of stability of spot position (ISO 14744-6:2000)
|
| EN ISO 14982-1998
| 农林机械 电磁兼容性 试验方法和验收标准
| Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
|
| EN ISO 15609-2-2001
| 金属焊接工艺的规范和验收 焊接工艺规范 第2部分：气焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001)
|
| EN ISO 15614-11-2002
| 金属焊接工艺的规范和验收 焊接工艺试验 第11部分：电子和激光束焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
|
| EN ISO 15614-8-2002
| 金属焊接工艺的规范和验收 焊接工艺试验 第8部分：管对管板接头焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002)
|
| EN ISO 15616-1-2003
| 高质量焊接及切割用二氧化碳激光束机的验收试验 第1部分：一般原则、验收条件
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003)
|
| EN ISO 15616-2-2003
| 高质量焊接及切割用二氧化碳激光束机的验收试验 第2部分：静止及动态精度的测量
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 2: Measurement of static and dynamic accuracy (ISO 15616-2:2003)
|
| EN ISO 15616-3-2003
| 高质量焊接及切割用二氧化碳激光束机的验收试验 第3部分：气流量及气压测量仪的校正
| Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
|
| EN ISO 3269-2000
| 紧固件 验收检查
| Fasteners - Acceptance inspection (ISO 3269:2000)
|
| EN ISO 9906-1999
| 回转动力泵 液压性能验收试验 等级1和2
| Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 (ISO 9906:1999)
|
| ENV 1317-4-2001
| 道路防护系统 第4部分：安全屏障的终端和过度性能等级、碰撞试验、验收标准和试验方法
| Road restraint systems - Part 4: Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
|
| prEN 12266-3-1995
| 工业阀门 交货技术条件 第3部分：试验程序和验收标准
| Industrial valves - Technical conditions of delivery - Part 3: Test procedures and acceptance criteria
|
| prEN 13231-1-2003
| 铁路设备 轨道 工程验收 第1部分：轨道工程
| Railway applications - Track; Acceptance of works - Part 1: Work on track; Plain line
|
| prEN 13231-2-2003
| 铁路设备 轨道 工程验收 第2部分：道岔和通口工程
| Railway applications - Track; Acceptance of works - Part 2: Work on switches and crossings
|
| prEN 13231-3-2003
| 铁路设备 轨道 工程验收 第3部分：铁轨磨光、铣削和轨道喷镀工程验收
| Railway applications - Track; Acceptance of works - Part 3: Acceptance of rail grinding, milling and plaining work in track
|
| prEN 1358-1993
| 木地板(包括拼花地板)和木镶板及包层木板 一般验收、标志和交货规则
| Wood flooring (including parquet) and wood pannelling and cladding; general acceptance; marking and delivery rules
|
| prEN 13741-2003
| 机械通风管组水冷塔的热能验收试验
| Thermal performance acceptance testing of mechanical draught series wet cooling towers
|
| prEN 13979-1-2003
| 铁路设备 轮副及转向架，轮子，技术验收程序 第1部分：锻制轮和轧制轮
| Railway applications - Wheelsets and bogies, Monobloc wheels; Technical approval procedure - Part 1: Forged and rolled wheels
|
| prEN 14343-2003
| 容积泵 验收性能试验
| Rotary positive displacement pumps - Performance tests for acceptance
|
| prEN ISO 15607-2003
| 金属焊接工艺的规范及验收 一般规则
| Specification and qualification of welding procedures for metallic materials - General rules (ISO/FDIS 15607:2003)
|
| prEN ISO 15609-1-2000
| 金属焊接工艺的规范和验收 焊接工艺规范 第1部分：电弧焊
| Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO/DIS 15609-1:2000)
|
| prEN ISO 15609-3-2000
| 金属焊接工艺的规范和验收 焊接工艺规范 第3部分：电子束焊
| Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 3: Electron beam welding (ISO/DIS 15609-3:2000)
|
| prEN ISO 15609-4-2000
| 金属焊接工艺的规范和验收 焊接工艺规范 第4部分：激光束焊
| Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO/DIS 15609-4:2000)
|
| prEN ISO 15609-5-2000
| 金属焊接工艺的规范和验收 焊接工艺规范 第5部分：电阻焊
| Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO/DIS 15609-5:2000)
|
| prEN ISO 15610-2003
| 金属焊接工艺的规范和验收 用经批准的焊接消耗材料验收
| Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO/FDIS 15610:2003)
|
| prEN ISO 15611-2003
| 金属焊接工艺的规范和验收 用焊接经验进行验收
| Specification and qualification of welding procedures for metallic materials - AQualification based on previous welding experience (ISO/FDIS 15611:2003)
|
| prEN ISO 15612-2000
| 金属焊接工艺的规范和验收 用标准焊接工艺进行验收
| Specification and approval of welding procedures for metallic materials - Approval by a standard welding procedure (ISO/DIS 15612:2000)
|
| prEN ISO 15613-2003
| 金属焊接工艺的规范和验收 用试生产试验进行验收
| Specification and qualification of welding procedure for metallic materials - Qualification based on pre-production welding test (ISO/FDIS 15613:2003)
|
| prEN ISO 15614-1-2003
| 金属焊接工艺的规范和验收 焊接工艺试验 第1部分：钢的电弧焊和气焊及镍和镍合金的焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO/FDIS 15614-1:2003)
|
| prEN ISO 15614-10-2000
| 金属焊接工艺的规范和验收 焊接工艺试验 第10部分：超基干焊
| Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbasic dry welding (ISO/DIS 15614-10:2000)
|
| prEN ISO 15614-12-2000
| 金属焊接工艺的规范和验收 焊接工艺试验 第12部分：点焊、缝焊及凸焊
| Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, sean and projection welding (ISO/DIS 15614-12:2000)
|
| prEN ISO 15614-2-2000
| 金属焊接工艺的规范和验收 焊接工艺试验 第2部分：铝及其合金的电弧焊
| Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2000)
|
| prEN ISO 15614-5-2003
| 金属焊接工艺的规范和验收 焊接工艺试验 第5部分：钛、锆及其合金的电弧焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO/FDIS 15614-5:2003)
|
| prEN ISO 15614-9-2000
| 金属焊接工艺的规范和验收 焊接工艺试验 第9部分：水下超基湿焊
| Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 9: Underwater hyperbasic wet welding (ISO/DIS 15614-9:2000)
|
| prEN ISO 19840-2003
| 油漆和清漆 用防护漆对钢结构粗表面进行防腐 干膜厚度的测量及验收标准
| Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of and acceptance criteria for the dry-film thickness of coatings on rough surfaces (ISO/FDIS 19840:2003)
|
| prENV 14033-1-2001
| 铁路设备 轨道装置 维修和铺设机械的验收条件 第1部分：轨道车辆的运行
| Railway applications - Track - Approval conditions for construction and maintenance machines - Part 1: Running of railbound machines
|
| SY/T 4103-2006
| 钢质管道焊接及验收
| Welding and acceptance standard for steel Pipings and pipelines
|
| 编号 | 中文名称 | 英文名称 |
|---|