编号 | 中文名称 | 英文名称 |
BIP 2064-2004
| 建筑物规则2000.验收文献B
| Building Regulations 2000 - Approved Document B
|
BIP 2065-2003
| 建筑物规则2000.验收文献M
| Building Regulations 2000 - Approved Document M
|
BS 1571-2-1975
| 容积式压缩机与排气机的试验.第2部分:空气压缩机与排气机的简化验收方法
| Specification for testing of positive displacement compressors and exhausters - Methods for simplified acceptance testing for air compressors and exhausters
|
BS 3135-1989
| 燃气轮机验收试验规范
| Specification for gas turbine acceptance test
|
BS 3S 500-1996
| 钢板和钢带检验、试验及验收程序
| Procedure for inspection, testing and acceptance of steel sheet and strip
|
BS 4L 100-1993
| 锻铝和铝合金的检验、试验和验收程序
| Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys
|
BS 4L 101-1990
| 铝基和镁基铸锭和铸件的检验、试验和验收程序
| Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings
|
BS 4T 100-1997
| 无缝钢管和管材的检验、试验和验收程序
| Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock
|
BS 5947-1992
| 包括验收条件的农用轮式拖拉机保护驾驶室及机架的静负荷试验方法
| Method of test for static loading of protective cabs and frames for agricultural wheeled tractors, including acceptance conditions
|
BS 5964-1-1990
| 建筑放样和测量.第1部分:测量、计划和组织方法与验收准则
| Building setting out and measurement - Methods of measuring, planning and organization and acceptance criteria
|
BS 5S 100-1993
| 锻钢制品(钢板、薄钢板、钢带和钢管除外)检验、试验和验收程序
| Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube)
|
BS 6001-7-2006
| 计数检验抽样程序.基于控制出厂质量用的信用原则的验收零抽样系统
| Acceptance sampling procedures for inspection by attributes - Part 7: Accept-zero sampling system based on credit principle for controlling outgoing quality
|
BS 6001-9-2002
| 计数取样检验程序.分批检验时控制出厂质量的以信任为基础的零抽样验收计划
| Sampling procedures for inspection by attributes - Double sampling plans using minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
|
BS 6065-1981
| 成型耐火材料制品的取样和验收试验方法
| Methods for sampling and acceptance testing of shaped refractory products
|
BS 6434-1984
| BS 6065"成形耐火材料制品取样和验收方法" 使用指南
| Guide to the use of BS 6065 'Methods for sampling and acceptance testing of shaped refractory products'
|
BS 6587-1985
| 紧固件的验收检验方法
| Method of acceptance inspection for fasteners
|
BS 7121-2-2003
| 起重机安全操作实用规程.验收、试验和检查
| Code of practice for safe use of cranes - Inspection, testing and examination
|
BS 7676-2-1993
| 齿轮验收法规.验收试验期间齿轮机构机械振动的测定
| Acceptance code for gears - Determination of mechanical vibrations of gear units during acceptance testing
|
BS 7783-1994
| 验收控制图
| Acceptance control charts
|
BS 7910-2005
| 金属结构裂纹验收评定方法指南
| Guide to methods for assessing the acceptability of flaws in metallic structures
|
BS B 100-1992
| 锻造铜合金的检测,试验和验收程序
| Procedure for inspection, testing and acceptance of wrought copper alloys
|
BS DD ENV 1317-4-2002
| 道路路障系统.安全路障的终端和过渡端的性能等级、冲击试验验收标准和试验方法
| Road restraint systems - Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
|
BS DD IEC/TS 62257-6-2006
| 农村电气化用小型可再生能源和混合系统的推荐.验收、操作、维护和替换
| Recommendations for small renewable energy and hybrid systems for rural electrification - Acceptance, operation, maintenance and replacement
|
BS EN 10222-4-1999
| 压力容器用钢锻件.具有高验收强度的可焊接细晶粒钢
| Steel forgings for pressure purposes - Weldable fine-grain steels with high proof strength
|
BS EN 12266-1-2003
| 工业用阀门.阀门试验.压力试验、试验规程和验收标准.强制要求
| Industrial valves - Testing of valves - Pressure tests, test procedures and acceptance criteria - Mandatory requirements
|
BS EN 12266-2-2002
| 工业用阀门.阀门试验.试验、试验规程和验收标准.补充要求
| Industrial valves - Testing of valves - Tests, test procedures and acceptance criteria - Supplementary requirements
|
BS EN 12484-4-2002
| 灌溉技术.自动草坪灌溉系统.设备安装和验收
| Irrigation techniques - Automatic turf irrigation systems - Installation and acceptance
|
BS EN 12517-1-2006
| 焊缝的无损检验.用放射线照相术评定钢、镍、钛及其合金的焊接接缝.验收等级
| Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels
|
BS EN 1289-1998
| 焊接的无损检验.焊接的超声波探检验.验收等级
| Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels
|
BS EN 1291-1998
| 焊缝的无损检验.焊缝的磁粉检验.验收等级
| Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels
|
BS EN 12952-15-2003
| 水管锅炉和辅助设备.验收试验
| Water-tube boilers and auxiliary installations - Acceptance tests
|
BS EN 12953-11-2003
| 火管锅炉.验收试验
| Shell boilers - Acceptance tests
|
BS EN 13121-1-2003
| 地面用玻璃钢槽罐和容器.原材料.技术条件和验收条件
| GRP tanks and vessels for use above ground - Raw materials - Specification conditions and acceptance conditions
|
BS EN 1317-2-1998
| 道路防护体系.安全栅栏的性能等级、冲击试验、验收标准和试验方法
| Road restraint systems - Performance classes, impact test acceptance criteria and test methods for safety barriers
|
BS EN 1317-3-2000
| 道路防护系统.防撞缓冲物的性能等级、冲击试验验收标准和试验方法
| Road restraint systems - Performance classes, impact test acceptance criteria and test methods for crash cushions
|
BS EN 13231-1-2006
| 铁路设施.轨道.作业验收.有碴轨道的作业.平原线
| Railway applications - Track - Acceptance of works - Part 1:Works on ballasted track - Plain line
|
BS EN 13231-2-2006
| 铁路设施.轨道.作业验收.有碴轨道的作业.道岔和交叉口
| Railway applications - Track - Acceptance of works - Part 2:Works on ballasted track - Switches and crossings
|
BS EN 13231-3-2006
| 铁路设施.轨道.作业验收.钢轨打磨、铣削和轨道计划作业验收
| Railway applications - Track - Acceptance of works - Part 3:Acceptance of rail grinding, milling and planing works in track
|
BS EN 13432-2000
| 包装.通过合成及生物降解规定包装可回收性的求.试验计划和包装最终验收评定标准
| Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging
|
BS EN 13741-2003
| 机械通风系列湿式冷却塔的热性能验收试验
| Thermal performance acceptance testing of mechanical draught series wet cooling towers
|
BS EN 1395-1996
| 热喷涂.热喷涂设备的验收检验
| Thermal spraying - Acceptance inspection of thermal spraying equipment
|
BS EN 13975-2003
| 体外诊断用医疗装置的验收试验用取样规程.统计特性
| Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects
|
BS EN 13979-1-2004
| 铁路设施.轮副和转向架.整轮.技术验收程序.锻制和轧制轮
| Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval - Forged and rolled wheels
|
BS EN 14343-2005
| 旋转容积泵.验收性能试验
| Rotary positive displacement pumps — Performance tests for acceptance
|
BS EN 14363-2005
| 铁路设施.铁路车辆运行特性的验收试验.运行性能试验和稳定性试验
| Railway applications — Testing for the acceptance of running characteristics of railway vehicles — Testing of running behaviour and stationary tests
|
BS EN 14584-2005
| 无损检验.声学辐射.验收试验过程中金属压力设备的检查.AE源的平面位置
| Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
|
BS EN 14612-2004
| 航天产品保险.自动机械波焊的检定和验收
| Space product assurance - Verification and approval of automatic machine wave soldering
|
BS EN 1610-1998
| 排水管和下水道的施工和验收
| Construction and testing of drains and sewers
|
BS EN 168100-1995
| 电子元器件质量评定协调体系.石英晶体器件的分规范.(性能验收)
| Harmonized system of quality assessment for electronic components - Sectional specification: quartz crystal units (capability approval)
|
BS EN 1712-1997
| 焊接无损检验.焊点超声检测.验收水平
| Non-destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels
|
BS EN 28206-1992
| 氧气切割机的验收试验.可重复准确度.操作特性
| Acceptance tests for oxygen cutting machines - Reproducible accuracy - Operational characteristics
|
BS EN 60041-1995
| 水轮机,现场验收试验测定蓄水泵和涡轮泵液压性能
| Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
|
BS EN 60193-1999
| 水轮机、蓄水泵和泵轮机.模型验收试验
| Hydraulic turbines, storage pumps and pump-turbines — Model acceptance tests |
BS EN 60383-1-1998
| 标称电压1000V以上的架空线用绝缘子.交流系统用陶瓷或玻璃绝缘子装置.定义、试验方法和验收准则
| Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
|
BS EN 60383-2-1995
| 标称电压高于1000V的架空线路用绝缘子.第2部分:交流电路系统绝缘子串和绝缘子装置.定义、试验方法和验收标
| Insulators for overhead lines with a nominal voltage above 1000 V. Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria
|
BS EN 60514-1995
| 2级交流电度表验收检验
| Acceptance inspection of class 2 alternating-current watthour meters
|
BS EN 60747-16-10-2004
| 半导体器件.单片微波集成电路的技术验收程序(TAS)
| Semiconductor devices - Technology Approval Schedule (TAS) for monolithic microwave integrated circuits
|
BS EN 60953-1-1996
| 汽轮机热验收试验规程.大型冷凝汽轮机的高精度规范
| Rules for steam turbine thermal acceptance tests - High accuracy for large condensing steam turbines
|
BS EN 60953-3-2002
| 汽轮机热力验收试验规则.改装的汽轮机的热性能验证试验
| Rules for steam turbine thermal acceptance tests - Thermal performance verification tests of retrofitted steam turbines
|
BS EN 61064-1993
| 汽轮机速度控制系统验收试验指南
| Guide to acceptance tests for steam turbine speed control systems
|
BS EN 61223-3-1-1999
| 医疗成像部门的评定及常规试验.验收试验.辐射照相和辐射显微照相系统用X射线设备的成像性能
| Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of X-ray equipment for radiographic and radiscopic systems
|
BS EN 61223-3-3-1997
| 医用成像部门常规试验评定.验收检验.数字减法血管造影术(DSA)用X射线成像性能
| Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of X-ray equipment for digital subtraction angiograp
|
BS EN 61223-3-4-2000
| 医疗成像部门的评定及常规试验.验收试验.牙科X射线设备成像性能
| Evaluation and routine testing in medical imaging departments - Acceptance tests
|
BS EN 61223-3-5-2004
| 医疗成像部门的评价及常规试验.验收试验.计算机断层摄影X射线设备的成像性能
| Evaluation and routine testing in medical imaging departments - Acceptance tests - Imaging performance of computed tomography X-ray equipment
|
BS EN 61325-1996
| 标称电压高于1000V以上高架线的绝缘.直流装置陶瓷或玻璃绝缘件.定义,试验方法和验收规则
| Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for d.c systems - Definitions, test methods and acceptance criteria
|
BS EN 61358-1996
| 电力系统(1和2类)用直接连接的交流电流静态瓦特表的验收检验
| Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
|
BS EN 818-1-1996
| 提升用的短节链条.安全性.一般验收条件
| Short link chain for lifting purposes - Safety - General conditions of acceptance
|
BS EN ISO 1-2002
| 产品几何量技术规范(GPS).产品几何量技术规范和验收的标准温度
| Geometrical Product Specifications (GPS) - Standard reference temperature for geometrical product specification and verification
|
BS EN ISO 10360-1-2001
| 产品几何量规范(GPS).坐标测量机(CMM)的验收和复检试验.词汇
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Vocabulary
|
BS EN ISO 10360-2-2002
| 产品几何量技术规范(GPS).坐标式测量机(CMM)的验收和再验证试验.测量尺寸用坐标式测量机
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs used for measuring size
|
BS EN ISO 10360-3-2001
| 产品几何量规范(GPS).坐标测量机(CMM)的验收和复检试验.旋转台的轴线作为第四条轴线的坐标测量机
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs with the axis of the rotary table as the fourth axis
|
BS EN ISO 10360-4-2001
| 产品几何量规范(GPS).坐标测量机(CMM)的验收和复检试验.用于扫描测量模式的坐标测量机
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs used in scanning measuring mode
|
BS EN ISO 10360-5-2001
| 产品几何量规范(GPS).坐标式测量设备(CMM)的验收和复检试验.带多触针探测系统的坐标测量机
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs using multiple stylus probing systems
|
BS EN ISO 10360-6-2002
| 产品几何量技术规范(GPS).坐标测量机(CMM)的验收和复验试验.计算高斯相关特性误差的估计
| Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Estimation of errors in computing Gaussian associated features
|
BS EN ISO 10545-1-1997
| 瓷砖.抽样和验收依据
| Ceramic tiles - Sampling and basis for acceptance
|
BS EN ISO 11546-2-1996
| 声学.隔音罩隔声性能的测定.现场测定(验收和鉴定用)
| Acoustics - Determination of sound insulation performances of enclosures - Measurements in situ (for acceptance and verification purposes)
|
BS EN ISO 14744-1-2001
| 焊接.电子束焊接机的验收检验.原理和验收条件
| Welding - Acceptance inspection of electron beam welding machines - Principles and acceptance conditions
|
BS EN ISO 14744-2-2001
| 焊接.电子束焊接机的验收检验.加速电压特性测量
| Welding - Acceptance inspection of electron beam welding machines - Measurement of accelerating voltage characteristics
|
BS EN ISO 14744-3-2001
| 焊接.电子束焊接机的验收检验.电子束电流特性的测量
| Welding - Acceptance inspection of electron beam welding machines - Measurement of beam current characteristics
|
BS EN ISO 14744-4-2001
| 焊接.电子束焊接机的验收检验.焊接速度的测量
| Welding - Acceptance inspection of electron beam welding machines - Measurement of welding speed
|
BS EN ISO 14744-5-2001
| 焊接.电子束焊接机的验收检验.偏转精度的测量
| Welding - Acceptance inspection of electron beam welding machines - Measurement of run-out accuracy
|
BS EN ISO 14744-6-2001
| 焊接.电子束焊接机的验收检验.电焊位置稳定性的测量
| Welding - Acceptance inspection of electron beam welding machines - Measurement of stability of spot position
|
BS EN ISO 14982-1998
| 农业和林业机械.电磁兼容性.试验方法和验收标准
| Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria
|
BS EN ISO 15616-1-2003
| 高质量焊接和切割用CO2激光束机的验收试验.通用原则和验收条件
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - General principles, acceptance conditions
|
BS EN ISO 15616-2-2003
| 高质量焊接和切割用CO2激光束机的验收试验.静态和动态精确度的测定
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Measurement of static and dynamic accuracy
|
BS EN ISO 15616-3-2003
| 高质量焊接和切割用CO2激光束机的验收试验.气体流量和压力测量仪的校正
| Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure
|
BS EN ISO 22827-1-2006
| Nd:YAG激光束焊接机器的验收试验.带光纤送的机器.激光装配
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Laser assembly
|
BS EN ISO 22827-2-2006
| Nd:YAG激光束焊接机器的验收试验.带光纤传送的机器.移动机理
| Acceptance tests for Nd:YAG laser beam welding machines - Machines with optical fibre delivery - Moving mechanism
|
BS EN ISO 3269-2001
| 紧固件.验收检验
| Fasteners - Acceptance inspection
|
BS EN ISO 5674-2004
| 农林用拖拉机和机械.动力输出轴护罩(PTO).强度和磨损试验及验收标准
| Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria
|
BS EN ISO 9906-2000
| 涡轮式泵.液压性能验收试验.1和2级
| Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2
|
BS ISO 10099-2001
| 气压液动.气液缸.最终检验和验收标准
| Pneumatic fluid power - Cylinders - Final examination and acceptance criteria
|
BS ISO 10100-2001
| 液压传动.液压缸.验收试验
| Hydraulic fluid power - Cylinders - Acceptance tests
|
BS ISO 10425-2003
| 石油和天然气工业用钢丝绳.最低要求和验收条件
| Steel wire ropes for the petroleum and natural gas industries - Minimum requirements and terms of acceptance
|
BS ISO 10725-2001
| 散装材料检验的验收取样计划和程序
| Acceptance sampling plans and procedures for the inspection of bulk materials
|
BS ISO 1217-1997
| 位移式压缩机.验收试验
| Displacement compressors - Acceptance tests
|
BS ISO 13448-1-2005
| 基于优先分配原则的验收取样规程(APP).APP法指南
| Acceptance sampling procedures based on the allocation of priorities principle (APP) - Guidelines for the APP approach
|
BS ISO 13448-2-2004
| 基于优先分配原则(APP)的验收抽样过程.按照属性验收抽样用协调单个抽样计划
| Acceptance sampling procedures based on the allocation of priorities principles (APP) - Coordinated single sampling plans for acceptance sampling by attributes
|
BS ISO 14560-2004
| 根据属性验收抽样程序.每百万非合格样品中规定的质量等级
| Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
|
BS ISO 15394-2000
| 包装.航运、运输和验收标签的两维符号和条形码
| Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels
|
BS ISO 17101-2004
| 农用机械.转式和甩刀式割草机.抛掷物体试验和验收标准
| Agricultural machinery - Rotary and flail mowers - Thrown-object test and acceptance criteria
|
BS ISO 1834-1999
| 起重用短环链.验收总则
| Short link chain for lifting purposes - General conditions of acceptance
|
BS ISO 1986-1-2001
| 卧轴矩台平面磨床的验收条件.精度检验.工作台长度达到1600mm的机床
| Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Machines with a table length of up to 1600mm
|
BS ISO 21247-2005
| 产品验收用组合验收零取样系统和过程控制程序
| Combined accept-zero sampling systems and process control procedures for product acceptance
|
BS ISO 23079-2005
| 镁和镁合金.回炉料.要求、分类和验收
| Magnesium and magnesium alloys - Returns - Requirements, classification and acceptance
|
BS ISO 3070-3-1999
| 卧式镗铣床的验收条件.精度试验.第3部分:带独立固定工作台的落地式机床
| Test conditions for boring and milling machines with horizontal spindle - Testing of the accuracy - Floor type machines with detached, stationary work-holding table
|
BS ISO 3070-4-1999
| 卧式镗铣床的验收条件.精度试验.第4部分:可移动床身的多刀刨床
| Test conditions for boring and milling machines with horizontal spindle - Testing of the accuracy - Planer type machines with movable column
|
BS ISO 3601-3-2005
| 液压流体动力.O型环.质量验收标准
| Fluid power systems - O-rings - Quality acceptance criteria
|
BS ISO 4094-2005
| 纸、纸板和纸浆.试验仪器的国际间校准.标准化和授权实验室的验收和任命
| Paper, board and pulps - International calibration of testing apparatus - Nomination and acceptance of standardizing and authorized laboratories
|
BS ISO 4703-2001
| 双柱式平面磨床的验收条件.导轨磨床.精度试验
| Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy
|
BS ISO 8579-1-2002
| 齿轮装置验收规程.空气中噪声试验规程
| Acceptance code for gear units - Test code for airborne sound
|
DD ENV 1317-4-2002
| 道路减震系统.安全屏障的接线端与过渡配件的性能等级、 冲击试验验收标准和试验方法
| Road restraint systems. Performance classes, impact test acceptance criteria and test methods for terminals and transitions of safety barriers
|
DD ENV 1402-3-1999
| 不定型耐火产品.验收特性
| Unshaped refractory products. Characterization as received
|
PD CR 13909-2002
| 识别卡系统.部门间用柔性薄卡.验收准则
| Identification card systems. Intersector thin flexible cards. Acceptance criteria
|
编号 | 中文名称 | 英文名称 |