| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| CR 10316-2001 | 低合金钢的光辐射分析（常规法） 发射光谱法的标准常规法制定指南 | Optical emission analysis of low alloy steels (routine method) - Guidelines for the preparation of standard routine method for optical emission spectrometry |
| CR 12471-2002 | 镍从直接和长期接触皮肤的物品的合金和镀层中释放的屏蔽试验 | Screening tests for nickel release from alloys and coatings in items that come into direct and prolonged contact with the skin |
| CR 12776-1997 | 铜和铜合金 材料号分配和材料登记的规定和程序 | Copper and copper alloys - Provisions and procedures for the allocation of material numbers and registration of materials |
| CR 13388-1998 | 铜和铜合金 组分和产品一览表 | Copper and copper alloys - Compendium of compositions and products |
| EN 10016-1-1994 | 拉制和/或冷轧用非合金钢棒 第1部分：一般要求 | Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements |
| EN 10016-2-1994 | 拉制和/或冷轧用非合金钢棒 第2部分：一般用钢棒的特殊要求 | Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod |
| EN 10016-3-1994 | 拉制和/或冷轧用非合金钢棒 第3部分：沸腾和沸腾代用低碳钢棒的特殊要求 | Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod |
| EN 10016-4-1994 | 拉制和/或冷轧用非合金钢棒 第4部分：专用棒材的特殊要求 | Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications |
| EN 10025-1993 | 热轧非合金结构钢制品 交货技术条件 | Hot rolled products of non-alloy structural steels; technical delivery conditions (includes amendment A1:1993) |
| EN 10028-2-2003 | 压力用途的钢板制品 第2部分：具有规定的耐高温性能的非合金钢和合金钢 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| EN 10028-4-2003 | 压力用途的钢板制品 第4部分：具有低温特性的镍合金钢 | Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
| EN 10051-1997+A1-1997 | 非合金钢和合金钢连续热轧钢板材、薄板和带材规范 尺寸和形状公差 | Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape (includes amendment A1:1997) |
| EN 10083-2-1996+A1-1996 | 淬火钢和回火钢 第2部分：非合金级钢交货技术条件 | Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels (includes Amendment A1:1996) |
| EN 10090-1998 | 内燃机阀门用钢和合金 | Valve steels and alloys for internal combustion engines |
| EN 10095-1999 | 耐热钢和镍合金 | Heat resisting steels and nickel alloys |
| EN 1011-4-2000 | 焊接 金属材料焊接的推荐规范 第4部分：铝和铝合金的电弧焊接 | Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys |
| EN 10126-1995 | 半成品交货的冷轧非合金钢电工钢薄板和钢带 | Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state |
| EN 10165-1995 | 半成品交货的冷轧电工合金钢制薄板和带材 | Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state |
| EN 10210-1-1994 | 非合金及细晶粒结构钢的热轧结构空心型材 交货技术条件 | Hot finished structural hollow sections of non-alloy and fine grain structural steels; part 1: technical delivery requirements |
| EN 10210-2-1997 | 非合金及细晶粒结构钢的热轧结构空心型材 第2部分：公差、尺寸和截面特性 | Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and sectional properties |
| EN 10216-1-2002 | 压力用途的无缝钢管 交货技术条件 第1部分：有规定室温特性的非合金钢管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties / Note: To be amended by EN 10216-1/prA1 (2003-07). |
| EN 10216-2-2002 | 压力用途的无缝钢管 交货技术条件 第2部分：有规定高温特性的非合金及合金钢管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties / Note: To be amended by EN 10216-2/prA1 (2003-07). |
| EN 10216-3-2002 | 压力用途的无缝钢管 交货技术条件 第3部分：合金细晶粒钢管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes / Note: To be amended by EN 10216-3/prA1 (2003-07). |
| EN 10216-4-2002 | 压力用途的无缝钢管 交货技术条件 第4部分：有规定低温特性的非合金及合金钢管 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties / Note: To be amended by EN 10216-4/prA1 (2003-07). |
| EN 10217-1-2002 | 压力用途的焊接钢管 交货技术条件 第1部分：有规定室温特性的非合金钢管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 10217-2-2002 | 压力用途的焊接钢管 交货技术条件 第2部分：有规定高温特性的电焊非合金及合金钢管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 10217-3-2002 | 压力用途的焊接钢管 交货技术条件 第3部分：合金细晶粒钢管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| EN 10217-4-2002 | 压力用途的焊接钢管 交货技术条件 第4部分：有规定低温特性的电焊非合金钢管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties |
| EN 10217-5-2002 | 压力用途的焊接钢管 交货技术条件 第5部分：有规定高温特性的埋弧焊非合金及合金钢管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 10217-6-2002 | 压力用途的焊接钢管 交货技术条件 第6部分：有规定低温特性的埋弧焊非合金钢管 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties |
| EN 10219-1-1997 | 冷成型细晶粒钢和非合金钢的焊接结构空心型材 第1部分：交货技术要求 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements |
| EN 10219-2-1997 | 冷成型细晶粒钢和非合金钢的焊接结构空心型材 第2部分：公差、尺寸和截面特性 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
| EN 10223-1-1997 | 栅栏用钢丝和钢丝制品 第1部分：镀锌和镀锌合金的有刺钢丝 | Steel wire and wire products for fences - Part 1: Zinc and zinc-alloy coated steel barbed wire |
| EN 10224-2002 | 输送液体（包括人类生活用水）用的非合金钢管和管件 交货技术条件 | Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions |
| EN 10244-2-2001 | 钢丝和钢丝制品 钢丝上的非黑色金属外层 第2部分：锌或锌合金镀层 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings |
| EN 10248-1-1995 | 非合金钢制热轧板堆 第1部分：交货技术条件 | Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| EN 10248-2-1995 | 非合金钢制热轧板堆 第2部分：尺寸和形状公差 | Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
| EN 10249-1-1995 | 非合金钢制冷成型板堆 第1部分：交货技术条件 | Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
| EN 10249-2-1995 | 非合金钢制冷成型板堆 第2部分：尺寸和形状公差 | Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
| EN 10250-2-1999 | 一般工程用途的敞口钢模锻件 第2部分：非合金钢和特殊钢 | Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels |
| EN 10250-3-1999 | 一般工程用途的敞口钢模锻件 第3部分：合金特殊钢 | Open die steel forgings for general engineering purposes - Part 3: Alloy special steels |
| EN 10257-1-1998 | 动力电缆或通信电缆铠甲用镀锌或锌合金的非合金钢电线 第1部分：地面电缆 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cables |
| EN 10257-2-1998 | 动力电缆或通信电缆铠甲用镀锌或锌合金的非合金钢电线 第2部分：海底电缆 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
| EN 10264-2-2002 | 钢丝和钢丝制品 绳用钢丝 第2部分：一般用途绳用冷拔非合金钢丝 | Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications |
| EN 10264-3-2002 | 钢丝和钢丝制品 绳用钢丝 第3部分：重载用途圆形和成形非合金钢丝 | Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications |
| EN 10268-1998 | 冷成形用高屈服强度微合金钢的冷轧扁钢材 交货一般条件 | Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions |
| EN 10269-1999 | 规定高温和/或低温性能的紧固件用钢及镍合金 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| EN 10296-1-2003 | 机械和一般工程用途的焊接圆形钢管 交货技术条件 第1部分：非合金钢管和合金钢管 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10297-1-2003 | 机械和一般工程用途的无缝圆形钢管 交货技术条件 第1部分：非合金钢管和合金钢管 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10302-2002 | 抗蠕变钢、镍和钴合金 | Creep resisting steels, nickel and cobalt alloys |
| EN 1057-1996 | 铜和铜合金 在卫生和加热器中输送水和气体用无缝圆铜管 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 1092-3-2003 | 法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第3部分：铜合金法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories PN designated - Part 3: Copper alloy flanges |
| EN 1092-4-2002 | 法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第4部分：铝合金法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges |
| EN 1172-1996 | 铜和铜合金 建筑用薄板和带材 | Copper and copper alloys - Sheet and strip for building purposes |
| EN 1173-1995 | 铜和铜合金 原料条件或回火名称 | Copper and copper alloys - Material condition or temper designation |
| EN 1179-2003 | 锌和锌合金 初级锌 | Zinc and zinc alloys - Primary zinc |
| EN 12019-1997 | 锌和锌合金 光学发射分光光度测定法 | Zinc and zinc alloys - Optical emission spectrometric analysis |
| EN 12020-1-2001 | 铝和铝合金 合金EN AW-6060和EN AW-6063的精密压制型材 第1部分：检验与交货技术条件 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
| EN 12020-2-2001 | 铝和铝合金 合金EN AW-6060和EN AW-6063的精密压制型材 第2部分：尺寸与形状公差 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form |
| EN 12060-1997 | 锌和锌合金 取样方法 规范 | Zinc and zinc alloys - Method of sampling - Specifications |
| EN 1213-1999 | 建筑物阀门 建筑物内便携式供水用的铜合金断流阀 试验和要求 | Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements |
| EN 12163-1998 | 铜和铜合金 一般用途的棒材 | Copper and copper alloys - Rod for general purposes |
| EN 12164-1998+A1-2000 | 铜和铜合金 供快速切削用的棒材 | Copper and copper alloys - Rod for free machining purposes |
| EN 12165-1998 | 铜和铜合金 已加工和未加工的锻坯 | Copper and copper alloys - Wrought and unwrought forging stock |
| EN 12166-1998 | 铜和铜合金 一般用途的线材 | Copper and copper alloys - Wire for general purposes |
| EN 12167-1998 | 铜及铜合金 一般用途的型材和扁棒材 | Copper and copper alloys - Profiles and rectangular bar for general purposes |
| EN 12168-1998+A1-2000 | 铜和铜合金 用于非加工目的的空心棒材 | Copper and copper alloys - Hollow rod for free machining purposes |
| EN 12258-1-1998 | 铝和铝合金 术语和定义 第1部分：通用术语 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| EN 12258-3-2003 | 铝和铝合金 术语和定义 第3部分：废料 | Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap |
| EN 12288-2003 | 工业用阀 铜合金闸阀 | Industrial valves - Copper alloy gate valves |
| EN 12373-1-2001 | 铝和铝合金 阳极氧化 第1部分：铝上装饰和保护阳极氧化膜的测定方法 | Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium |
| EN 12373-10-1998 | 铝和铝合金 阳极氧化 第10部分：用磨擦喷射试验机测定阳极氧化膜的平均比耐磨性 | Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
| EN 12373-11-2000 | 铝和铝合金 阳极氧化 第11部分：20°、45°、60°或85°角处测量阳极氧化膜在的镜面反射率和镜面光泽度 | Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20? 45? 60?or 85?国际标准分类号：25.220.20 77.120.10英文标准名称：Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20? 45? 60?or 85? |
| EN 12373-12-2000 | 铝和铝合金 阳极氧化 第12部分：用积分球仪测量铝表面的反射特性 | Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| EN 12373-13-2000 | 铝和铝合金 阳极氧化 第13部分：用测角光度仪或滤色测角光度仪测量铝表面的反射特性 | Aluminium and aluminium alloys - Anodizing - Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer |
| EN 12373-14-2000 | 铝和铝合金 阳极氧化 第14部分：阳极氧化膜成象清晰度的目测 座标比例尺法 | Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings - Chart scale method |
| EN 12373-15-2000 | 铝和铝合金 阳极氧化 第15部分：阳极氧化膜抗形变破裂性的评定 | Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation |
| EN 12373-16-2001 | 铝和铝合金 阳极氧化 第16部分：薄阳极氧化膜的连续性检验 硫酸铜试验 | Aluminium and aluminium alloys - Anodizing - Part 16: Check of continuity of thin anodic oxdation coatings; Copper sulfate test |
| EN 12373-17-2001 | 铝和铝合金 阳极氧化 第17部分：电击穿电压的测定 | Aluminium and aluminium alloys - Anodizing - Part 17: Determination of electric breakdown potential |
| EN 12373-18-2001 | 铝和铝合金 阳极氧化 第18部分：点蚀评定铝用检定系统 图表法 | Aluminium and aluminium alloys - Anodizing - Part 18: Rating system for the evaluation of pitting corrosion; Chart method |
| EN 12373-19-2001 | 铝和铝合金 阳极氧化 第19部分：点蚀评定铝用检定系统 网格法 | Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion; Grid method |
| EN 12373-2-1998 | 铝和铝合金 阳极氧化 第2部分：阳极氧化膜单位面积质量（表面密度）的测定 重量分析法 | Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method |
| EN 12373-3-1998 | 铝和铝合金 阳极氧化 第3部分：阳极氧化膜厚度的测定 分束显微镜无损测量 | Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope |
| EN 12373-4-1998 | 铝和铝合金 阳极氧化 第4部分：通过事先经酸处理的染斑试验估计封闭后 阳极氧化膜吸收能力的损失 | Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment |
| EN 12373-5-1998 | 铝和铝合金 阳极氧化 第5部分：用导纳测量法评定封闭阳极氧化膜的质量 | Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance |
| EN 12373-6-1998 | 铝和铝合金 阳极氧化 第6部分：通过测量事发未经酸处理的磷酸/铬酸中浸泡后的质量损失评定封闭阳极氧化膜 | Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment |
| EN 12373-7-2002 | 铝和铝合金 阳极氧化 第7部分：通过测量事发经酸处理的磷酸/铬酸中浸泡后的质量损失评定封闭阳极氧化膜的 | Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment |
| EN 12373-8-1998 | 铝和铝合金 阳极氧化 第8部分：着色阳极氧化膜可比耐紫外光和耐热色牢固度的测定 | Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings |
| EN 12373-9-1998 | 铝和铝合金 阳极氧化 第9部分：用磨擦轮磨损试验机测定阳极氧化膜耐磨性和耐磨系数 | Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus |
| EN 12384-1999 | 铜和铜合金 带材弹性弯曲极限的测定 | Copper and copper alloys - Determination of spring bending limit on strip |
| EN 12392-2000 | 铝和铝合金 锻制品 压力设备生产用制品的特殊要求 | Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment |
| EN 12402-1999 | 铅和铅合金 分析用取样方法 | Lead and lead alloys - Methods of sampling for analysis |
| EN 12420-1999 | 铜和铜合金 锻件 | Copper and copper alloys - Forgings |
| EN 12421-1998 | 镁和镁合金 纯镁 | Magnesium and magnesium alloys - Unalloyed magnesium |
| EN 12438-1998 | 镁和镁合金 铸造阳极用镁合金 | Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
| EN 12441-1-2001 | 锌和锌合金 化学分析 第1部分：锌合金中铝的测定 滴定法 | Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys; Titrimetric method |
| EN 12441-2-2001 | 锌和锌合金 化学分析 第2部分：锌合金中镁的测定 火焰原子吸收光谱法 | Zinc and zinc alloys - Chemical analysis - Part 2: Determination of magnesium in zinc alloys; Flame atomic absorption spectrometric method |
| EN 12441-3-2001 | 锌和锌合金 化学分析 第3部分：铅、镉和铜的测定 火焰原子吸收光谱法 | Zinc und zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper; Flame atomic absorption spectrometric method |
| EN 12441-4-2003 | 锌和锌合金 化学分析 第4部分：用分光光度法测定锌合金中的铁 | Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys; Spectrophotometric method |
| EN 12441-5-2003 | 锌和锌合金 化学分析 第5部分：用分光光度法测定原生锌中的铁 | Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc; Spectrophotometric method |
| EN 12441-6-2003 | 锌和锌合金 化学分析 第6部分：用原子吸收光谱法测定铝和铁 | Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron-Flame atomic absorption spectrometric method |
| EN 12449-1999 | 铜和铜合金 通用无缝圆管 | Copper and copper alloys - Seamless, round tubes for general purposes |
| EN 12450-1999 | 铜和铜合金 无缝圆铜毛细管 | Copper and copper alloys - Seamless, round copper capillary tubes |
| EN 12451-1999 | 铜和铜合金 热交换器用无缝圆管 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| EN 12452-1999 | 铜和铜合金 热交换器用轧制翅片无缝管 | Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| EN 12482-1-1998 | 铝和铝合金 一般用重轧坯料 第1部分： 热轧重轧坯料规范 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock |
| EN 12482-2-1998 | 铝和铝合金 一般用重轧坯料 第2部分：冷轧重轧坯料规范 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock |
| EN 12487-2000 | 金属的防腐蚀 铝和铝合金上清洗和非清洗的铬酸盐转化镀层 | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| EN 12501-2-2003 | 金属材料的防腐 泥土中可能出现的腐蚀 第２部分：低合金和非合金的钢铁材料 | Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2: Low alloyed and non alloyed ferrous materials |
| EN 12508-2000 | 金属和合金的防腐 表面处理、金属和其它无机涂层 词汇 | Corrosion protection of metals and alloys - Surface treatment, metallic and other inorganic coatings - Vocabulary |
| EN 12536-2000 | 焊接消耗品 非合金钢和抗蠕变钢气焊用焊条 分类 | Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification |
| EN 1254-1-1998 | 铜和铜合金 管件 第1部分：低温焊接或纤焊接到铜管上的毛细管用端头管件 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 1254-2-1998 | 铜和铜合金 管件 第2部分：铜管用压接端头管件 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| EN 1254-3-1998 | 铜和铜合金 管件 第3部分：塑料管用压接端头管件 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| EN 1254-4-1998+AC-1999 | 铜和铜合金 管件 第4部分：带有与毛细管端接或压接端头的管件 | Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends |
| EN 1254-5-1998 | 铜和铜合金 管件 第5部分：纤焊到铜管的毛细管用短端头管件 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
| EN 12548-1999 | 铅和铅合金 电缆铍和护套用铅合金铸锭 | Lead and lead alloys - Lead alloy ingots for electric cable sheathing and for sleeves |
| EN 12588-1999 | 铅和铅合金 建筑物用铅轧皮 | Lead and lead alloys - Rolled lead sheet for building purposes |
| EN 12659-1999 | 铅和铅合金 铅 | Lead and lead alloys - Lead |
| EN 12735-1-2001 | 铜和铜合金 空调和制冷用无缝圆铜管 第１部分：管道系统用管子 | Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
| EN 12735-2-2001 | 铜和铜合金 空调和制冷用无缝圆铜管 第２部分：设备用管子 | Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
| EN 12844-1998 | 锌和锌合金 铸件 规范 | Zinc and zinc alloys - Castings - Specifications |
| EN 12861-1999 | 铜与铜合金 废料 | Copper and copper alloys - Scrap |
| EN 12862-2000 | 可运输气瓶 可移动再充式焊接铝合金气瓶的设计和结构规范 | Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| EN 12893-2000 | 铜和铜合金 螺旋拉伸数的测定 | Copper and copper alloys - Determination of spiral elongation number |
| EN 12938-1999 | 铅锡锑合金的分析方法 用原子光谱法测定合金及杂质元素含量 | Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry |
| EN 1301-1-1997 | 铝和铝合金 拉制线材 第1部分：检查和交货的技术条件 | Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery |
| EN 1301-2-1997+AC-1998 | 铝和铝合金 拉制线材 第2部分：机械性能 | Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties |
| EN 1301-3-1997 | 铝和铝合金 拉制线材 第3部分：尺寸和公差 | Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions |
| EN 13086-2000 | 铅和铅合金 氧化铅 | Lead and lead alloys - Lead oxides |
| EN 13147-2001 | 铜和铜合金 窄带材边界区域中残余应力的测定 | Copper and copper alloys - Determination of residual stresses in the border area of slit strip |
| EN 13148-2001 | 铜和铜合金 热浸镀锡带材 | Copper and copper alloys - Hot-dip tinned strip |
| EN 13195-1-2002 | 铝和铝合金 海洋设备（造船、海运和海上设备）用锻造和浇铸产品 | Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1: Specifications |
| EN 13283-2002 | 锌和锌合金 再生锌 | Zinc and zinc alloys - Secondary zinc |
| EN 13347-2002 | 铜和铜合金 焊接和黄铜焊用棒和线 | Copper and copper alloys - Rod and wire for welding and braze welding |
| EN 13348-2001 | 铜和铜合金 医用气体或真空用无缝圆铜管 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| EN 13349-2002 | 铜和铜合金 带实心覆盖层的预绝缘铜管 | Copper and copper alloys - Pre-insulated copper tubes with solid covering |
| EN 13599-2002 | 铜和铜合金 电气用途的铜板、铜片和铜条 | Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
| EN 13600-2002 | 铜和铜合金 电气用途的无缝铜管 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| EN 13601-2002 | 铜和铜合金 常规电气用途的铜棒、铜条和铜线 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| EN 13602-2002 | 铜和铜合金 用于制造导电体的拉制圆铜线 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| EN 13603-2002 | 铜和铜合金 评估电气用途拉制圆铜线上的保护锡镀层的试验方法 | Copper and copper alloys - Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes |
| EN 13604-2002 | 铜和铜合金 电子管、半导体器件和真空设备用高导电率铜产品 | Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications |
| EN 13605-2002 | 铜和铜合金 电气用途的铜型材和型线材 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| EN 13828-2003 | 建筑物阀门 建筑物中饮用水供水用手动铜合金及不锈钢球阀 试验和要求 | Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Test and requirements |
| EN 1386-1996 | 铝和铝合金 梯级金属板 规范 | Aluminium and aluminium alloys - Tread plate - Specifications |
| EN 13920-1-2003 | 铝和铝合金 废料 第1部分：一般要求、取样和试验 | Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests |
| EN 13920-10-2003 | 铝和铝合金 废料 第10部分：由用过的铝饮料罐组成的废料 | Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of use aluminium beverage cans |
| EN 13920-11-2003 | 铝和铝合金 废料 第11部分：包括铝-铜散热器在内的废料 | Aluminium and aluminium alloys - Scrap - Part 11: Scrap consisting of aluminium-copper radiators |
| EN 13920-12-2003 | 铝和铝合金 废料 第12部分：由单一合金组成的废料 | Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy |
| EN 13920-13-2003 | 铝和铝合金 废料 第13部分：由两种或多种合金组成的混合切屑 | Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys |
| EN 13920-14-2003 | 铝和铝合金 废料 第14部分：消费品铝包装生产的废料 | Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings |
| EN 13920-15-2003 | 铝和铝合金 废料 第15部分：消费品铝包装产生的去涂层铝废料 | Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings |
| EN 13920-16-2003 | 铝和铝合金 废料 第16部分：由浮渣、碎屑、铸锭的金属物组成的废料 | Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics |
| EN 13920-2-2003 | 铝和铝合金 废料 第2部分：纯铝废料 | Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap |
| EN 13920-3-2003 | 铝和铝合金 废料 第3部分：线头和缆绳 | Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap |
| EN 13920-4-2003 | 铝和铝合金 废料 第4部分：由单一锻压合金组成的废料 | Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy |
| EN 13920-5-2003 | 铝和铝合金 废料 第5部分：由同一系列的两种或多种锻压合金组成的废料 | Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series |
| EN 13920-6-2003 | 铝和铝合金 废料 第6部分：由两种或多种锻压合金组成的废料 | Aluminium and aluminium alloys - Scrap - Part 6: Scrap consisting of two or more wrought alloys |
| EN 13920-7-2003 | 铝和铝合金 废料 第7部分：由铸锭组成的废料 | Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings |
| EN 13920-8-2003 | 铝和铝合金 废料 第8部分：由铝分离工艺必经的切岁程序中产生的非铁质材料组成的废料 | Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes |
| EN 13920-9-2003 | 铝和铝合金 废料 第9部分：非铁质碎料的铝分离工艺所产生的废料 | Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials |
| EN 13957-2003 | 铝合及铝合金 一般用途挤压圆形、蛇形管 规范 | Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification |
| EN 13958-2003 | 铝及铝合金 一般用途冷拉圆形、蛇形管 规范 | Aluminium and aluminium alloys - Cold drawn round, coiled tube for general applications - Specification |
| EN 1396-1996 | 铝和铝合金 一般用途的盘绕涂层薄板和带材 规范 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 13981-1-2003 | 铝及铝合金 铁路结构用产品，检验和交货技术条件 第1部分：挤压产品 | Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for inspection and delivery - Part 1: Extruded products |
| EN 14057-2003 | 铅及铅合金 废料 术语和定义 | Lead and lead alloys - Scraps - Terms and definitions |
| EN 1412-1995 | 铜和铜合金 欧洲编号系统 | Copper and copper alloys - European numbering system |
| EN 14121-2003 | 铝及铝合金 电工用铝片、铝带和铝板 | Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications |
| EN 1503-4-2002 | 阀门 阀体、阀帽和阀套用材料 第3部分：欧洲标准规定的铜合金 | Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards |
| EN 1559-4-1999 | 铸造 交货的技术条件 第3部分：铝合金铸件的附加要求 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
| EN 1559-5-1997 | 铸造 交货的技术条件 镁合金铸件的附加要求 | Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings |
| EN 1559-6-1998 | 铸造 交货的技术条件 锌合金铸件附加要求 | Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings |
| EN 1592-1-1997 | 铝和铝合金 HF接缝焊接管 第1部分：检验和交货技术条件 | Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery |
| EN 1592-2-1997 | 铝和铝合金 HF接缝焊接管 第2部分：机械性能 | Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties |
| EN 1592-3-1997 | 铝和铝合金 HF接缝焊接管 第3部分：圆形管的尺寸和形状公差 | Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes |
| EN 1592-4-1997 | 铝和铝合金 HF接缝焊接管 第4部分：方形、矩形和异形管的尺寸和形状公差 | Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes |
| EN 1597-1-1997 | 焊料 试验方法 第1部分：镍和镍合金钢中完全焊接金属试验样品用试件 | Welding consumables - Test methods - Part 1: Test piece for all-weld metal test specimens in steel, nickel and nickel alloys |
| EN 1652-1997 | 铜和铜合金 一般用途的平板、薄板材、带材和圆形材 | Copper and copper alloys - Plate, sheet, strip and circles for general purposes |
| EN 1653-1997+A1-200 | 铜和铜合金 锅炉、压力容器和蓄热水器用的平板、薄板材和圆形材 | Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
| EN 1654-1997+AC-2003 | 铜和铜合金 弹簧和连接器用带材 | Copper and copper alloys - Strip for springs and connectors |
| EN 1655-1997 | 铜和铜合金 符合性声明 | Copper and copper alloys - Declarations of conformity |
| EN 1668-1997 | 焊接耗材 非合金和细晶粒钢的惰性气体保护钨极焊用焊条 焊丝和熔敷 分类 | Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels - Classification |
| EN 1669-1996 | 铝及铝合金 试验方法 薄板材和带材的耳子试验 | Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip |
| EN 1676-1996 | 铝及铝合金 重熔用的合金锭 规范 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| EN 1706-1998 | 铝及铝合金 铸件 化学成分和机械性能 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
| EN 1715-1-1997 | 铝和铝合金 拉制件 第1部分：检验和交货的一般要求及技术条件 | Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery |
| EN 1715-2-1997+AC-1998 | 铝和铝合金 拉制坯料 第2部分：电气应用的特殊要求 | Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications |
| EN 1715-3-1997+AC-1998 | 铝和铝合金 拉制坯料 第3部分：机械应用的特殊要求(包括焊接) | Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding) |
| EN 1715-4-1997 | 铝和铝合金 拉制坯料 第4部分：焊接应用的特殊要求 | Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications |
| EN 1753-1997+AC-1997 | 镁和镁合金 镁合金锭和铸件 | Magnesium and magnesium alloys - Magnesium alloy ingots and castings |
| EN 1754-1997 | 镁和镁合金 镁和镁合金氧化极、铸锭和铸件命名体系 | Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Designation system |
| EN 1758-1997 | 铜及铜合金 引线架用带材 | Copper and copper alloys - Strip for lead frames |
| EN 1759-3-2003 | 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第2部分：铜合金法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 3: Copper alloy flanges |
| EN 1759-4-2003 | 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第4部分：铝合金法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges |
| EN 1774-1997 | 锌和锌合金 铸造用合金 铸锭和铸液 | Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid |
| EN 1780-1-2002 | 铝和铝合金 再熔化母合金和铸件用合金铝铸锭标识 第1部 分：数字标识体系 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
| EN 1780-2-2002 | 铝和铝合金 再熔化母合金及铸件用合金铝铸锭标识 第2部分：基于化学符号标识体系 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
| EN 1780-3-2002 | 铝和铝合金 再熔化母合金及铸件用合金铝铸锭标识 第1部分：数字标识体系 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical compositon |
| EN 1802-2002 | 可运输气瓶 无缝铝合金气瓶的周期检验和试验 | Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders |
| EN 1904-2000 | 贵重金属 用于贵重金属珠宝合金的焊料的细度 | Precious metals - The finenesses of solders used with precious metal jewellery alloys |
| EN 1971-1998 | 铜和铜合金 管的涡流试验 | Copper and copper alloys - Eddy current test for tubes |
| EN 1975-1999+AC-1999 | 可运输气瓶 容量从0,5L到150L(包括150L)可再灌装的无缝铝和铝合金制气瓶的设计和结构规范 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre / Note: To be amended by EN 1975/prA1 (2003-07). |
| EN 1975/prA1-2003 | 可运输气瓶 容积从0.5L至150L可再灌装可运输无缝铝和铝合金气体瓶设计和结构规范 修改A1 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litres; Amendment A1 / Note: Intended as an amendment to EN |
| EN 1976-1998 | 铜及铜合金 未最后成形的铜铸件产品 | Copper and copper alloys - Cast unwrought copper products |
| EN 1977-1998 | 铜及铜合金 铜拉制坯料(绕材) | Copper and copper alloys - Copper drawing stock (wire rod) |
| EN 1978-1998 | 铜及铜合金 铜阴极 | Copper and copper alloys - Copper cathodes |
| EN 1981-2003 | 铜及铜合金 母合金 | Copper and copper alloys - Master alloys |
| EN 1982-1998 | 铜和铜合金 铸锭和铸件 | Copper and copper alloys - Ingots and castings |
| EN 2004-1-1993 | 航空航天系列 铝和铝合金产品试验方法 第1部分：锻铝合金电导率的测定 | Aerospace series; test methods for aluminium and aluminium alloy products - Part 1: Determination of electrical conductivity of wrought aluminium alloys |
| EN 2004-5-1993 | 航空航天系列 铝和铝合金产品试验方法 第5部分：包层半成品的包层厚度和铜扩散的测定 | Aerospace series; test methods for aluminium and aluminium alloy products - Part 5: Determination of cladding thickness and copper diffusion of clad semi-finished products |
| EN 2044-2001 | 航空航天系列 拉制的圆形铝和铝合金型材 容差h11 直径4mm≤D≤63mm 尺寸 | Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm ≤ D ≤ 63 mm - Dimensions |
| EN 2045-2001 | 航空航天系列 拉制的方形铝和铝合金型材 容差h11 厚度6mm≤a≤50mm 尺寸 | Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm ≤ a ≤ 50 mm - Dimensions |
| EN 2046-2001 | 航空航天系列 拉制的六角形铝和铝合金型材 容差h11 厚度6mm≤a≤50mm 尺寸 | Aerospace series - Hexagonal bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm ≤ a ≤ 50 mm - Dimensions |
| EN 2047-2001 | 航空航天系列 挤压的铝合金珠状L截面 尺寸 | Aerospace series - Beaded L-section extruded, in aluminium alloys - Dimensions |
| EN 2048-2001 | 航空航天系列 挤压的铝合金L截面 尺寸 | Aerospace series - Extruded L-section, in aluminium alloys - Dimensions |
| EN 2049-2001 | 航空航天系列 挤压的铝合金槽形材 尺寸 | Aerospace series - Extruded channel section, in aluminium alloys - Dimensions |
| EN 2050-2001 | 航空航天系列 挤压的铝合金T型材 尺寸 | Aerospace series - Extruded T-section, in aluminium alloys - Dimensions |
| EN 2066-2001 | 航空航天系列 铝合金挤压型材 一般公差 | Aerospace series - Extruded section in aluminium alloys - General tolerances |
| EN 2070-1-1989+A1-1993 | 航空航天系列 锻造的铝和铝合金产品 技术法规 第1部分：一般要求 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements |
| EN 2070-2-1989 | 航空航天系列 锻造的铝和铝合金产品 技术规范 第2部分：薄板、带型材和板材 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 2: Sheet, strip formed profiles and plate |
| EN 2070-3-1989 | 航空航天系列 锻造的铝和铝合金产品 技术规范 第3部分：棒材和型材 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 3: Bar and section |
| EN 2070-4-1989 | 航空航天系列 锻造的铝和铝合金产品 技术规范 第4部分：结构用管 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specifications - Part 4: Tube for structures |
| EN 2070-5-1989 | 航空航天系列 锻造的铝和铝合金产品 技术规范 第5部分：压力下用管 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 5: Tube used under pressure |
| EN 2070-6-1989 | 航空航天系列 锻造的铝和铝合金产品 技术规范 第6部分：铆钉用线材 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 6: Rivet wire |
| EN 2070-7-1989 | 航空航天系列 锻造的铝和铝合金产品 技术规范 第7部分：锻坯 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 7: Wrought forging stock |
| EN 2071-2001 | 航空航天系列 铝和铝合金薄板 厚度0.25mm≤a≤6mm 尺寸 | Aerospace series - Sheets in aluminium and aluminium alloys - Thickness 0.25 mm≤ a ≤ 6 mm - Dimensions |
| EN 2076-1-1989+A1-1993 | 航空航天系列 铝和镁合金铸锭和铸件 技术规范 第1部分：一般要求 | Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements |
| EN 2076-2-1989 | 航空航天系列 铝和镁合金铸锭和铸件 技术规范 第2部分：冶炼用铸锭 | Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 2: Ingots for remelting |
| EN 2076-3-1989 | 航空航天系列 铝和镁合金铸锭和铸件 技术规范 第3部分：预制件和产品铸件 | Aerospace series - Aaluminium and magnesium alloy ingots and castings - Technical specification - Part 3: Pre-production and production castings |
| EN 2082-1-1989+A1-1993 | 航空航天系列 铝合金锻坯和锻件 技术规范 第1部分：一般要求 | Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements |
| EN 2082-2-1989 | 航空航天系列 铝合金锻坯和锻件 技术规范 第2部分：锻坯 | Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 2: Forging stock |
| EN 2082-3-1989 | 航空航天系列 铝合金锻坯和锻件 技术规范 第3部分：预制件和锻件 | Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings |
| EN 2083-2001 | 航空航天系列 电缆用铜和铜合金导体 产品标准 | Aerospace series - Copper or copper alloys conductors for electrical cables - Product standard |
| EN 2089-1994 | 航空航天系列 铝合金AL-P2014A T6或T62 薄板及带材 0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - sheet and strip - 0.4 mm ≤ a ≤ 6 mm |
| EN 2092-1993 | 航空航天系列 铝合金AL-P7050-T6或T62 包层薄板和带材0.4mm≤a≤6mm | Aerospace series - Aluminium alloy Al-P7075-T6 or T62 - Clad sheet and strip 0.4mm≤ a ≤6 mm |
| EN 2093-1992 | 航空航天系列 铝合金AL-P7009-T74 手工锻件20mm≤a≤150mm | Aerospace series - Aluminium alloy AL-P7009-T74 - Hand forgins 20 mm ≤ a ≤ 150 mm |
| EN 2094-1992 | 航空航天系列 铝合金AL-P7009-T74 模锻件3mm≤a≤150mm | Aerospace series - Aluminium alloy AL-P7009-T74 - Die forgins 3 mm ≤ a ≤ 150 mm |
| EN 2100-1992 | 航空航天系列 铝合金AL-P2014A-T4511 挤压棒材和型材a或D≤200mm | Aerospace series - Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D ≤ 200 mm |
| EN 2101-1991 | 航空航天系列 铝合金和锻铝合金铬酸阳极化处理 | Aerospace series - Chromic acid anodizing of aluminium and wrought aluminium alloys |
| EN 2103-1-1991 | 航空航天系列 钢、镍基合金以及钴基合金再熔料和铸件 技术规范 第1部分：一般要求 | Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Part 1: General requirements |
| EN 2103-2-1991 | 航空航天系列 钢、镍基合金及钴基合金再熔料和铸件 技术规范 第2部分：再熔料 | Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Part 2: Remelting stock |
| EN 2103-3-1991 | 航空航天系列 钢、镍基合金及钴基合金再熔料和铸件 技术规范 第3部分：预制件和铸件 | Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Part 3: Pre-production and production castings |
| EN 2122-1996 | 航空航天系列 阳极化和铬酸盐处理的扁平铝合金垫圈 | Aerospace series - Washers, flat, in aluminium alloy, anodized or chromated |
| EN 2126-1992 | 航空航天系列 铝合金AL-P7075-T651 板材 6mm≤a≤80mm | Aerospace series - Aluminium alloy AL-P7075-T651 - Plates 6 mm ≤ a ≤ 80 mm |
| EN 2127-1992 | 航空航天系列 铝合金AL-P7075-T73511 挤压棒材和型材 a或D≤100mm | Aerospace series - Aluminium alloy AL-P7075-T73511 - Extrudes bars and sections a or D ≤ 100 mm |
| EN 2128-1992 | 航空航天系列 铝合金AL-P7075-T7351 拉制棒材 6mm≤a或D≤75mm | Aerospace series - Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm ≤ a or D ≤ 75 mm |
| EN 2131-2001 | 航空航天系列 铝合金板材 厚度 6mm≤a≤160mm 尺寸 | Aerospace series - Plates in aluminium alloys - Thickness 6 mm ≤a ≤ 160 mm - Dimensions |
| EN 2133-1997 | 航空航天系列 规定的抗拉强度为1450 MPa的钢的镀镉 铜、铜合金和镍合金 | Aerospace series - Cadmium plating of steels with specified tensile strength 1450 MPa, copper, copper alloys and nickel alloys |
| EN 2134-2001 | 航空航天系列 挤压铝和铝合金圆形型材 直径10mm≤D≤220mm 尺寸 | Aerospace series - Round bars, extruded, in aluminium and aluminium alloys - Diameter 10 mm ≤ D ≤ 220 mm - Dimensions |
| EN 2144-1994 | 航空航天系列 铝合金2117系列万能分度头型实心铆钉 英制系列 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, inch based series |
| EN 2145-1994 | 航空航天系列 经过阳极氧化或铬酸盐处理的2117号铝合金制万能分度头型实心铆钉 英制系列 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series |
| EN 22063-1993 | 金属和其他无机涂覆盖层 热喷镀 锌、铝及其合金 | Metallic and other inorganic coatings - Thermal spraying - Zinc, aluminium and their alloys (ISO 2063:1991, modified) |
| EN 2236-1992 | 航空航天系列 带头高精密公差钉体的合金钢销钉 技术规范 | Aerospace series - Pins, headed, close tolerance shank, in alloy steel - Technical specification |
| EN 2257-1997 | 航空航天系列 结构用铝和铝合金环形管 直径为6mm≤D≤100mm.厚度1mm≤a≤6mm.尺寸 | Aerospace series - Circular tubes for structures in aluminium and aluminium alloys - Diameter 6 mm D 100 mm - Thickness 1 mm a 6 mm - Dimensions |
| EN 2258-1997 | 航空航天系列 流体设备用铝和铝合金环形管 直径为3.2mm≤D≤100mm 厚度0.5mm≤a≤2.5mm.尺寸 | Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys - Diameter 3,2 mm ≤ D≤ 100 mm - Thickness 0,6 mm ≤ a 2,5 mm - Dimensions |
| EN 2264-1996 | 航空航天系列 带增大沉孔双耳游动托板自锁镀镉合金钢MOS2润滑的螺母 等级：900MPa(室温下)/235℃ | Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 ℃ |
| EN 2284-1991 | 航空航天系列 铝合金和锻铝合金硫酸阳极化处理 | Aerospace series - Sulphuric acid anodizing of aluminium and wrought aluminium alloys |
| EN 2285-1989 | 航空航天系列 具有自润滑衬套的纯铝合金轴套 尺寸和负荷 | Aerospace series - Bushes, plain aluminium alloy with self-lubricating liner; Dimensions and loads |
| EN 2286-1989 | 航空航天系列 具有自润滑衬套的法兰铝合金轴套筒 尺寸和负荷 | Aerospace series - Bushes, flanged aluminium alloy with self-lubricating liner; Dimensions and loads |
| EN 2289-1996 | 航空航天系列 飞行控制器用铝合金操纵杆 技术规范 | Aerospace series - Rod bodies in aluminium alloy for flight controls - Technical specification |
| EN 2290-1-1998 | 航空航天系列 可调节终端配件用的铝合金飞行控制器操纵杆 第1部分：尺寸和荷载 | Aerospace series - Rod bodies, flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads |
| EN 2318-1992 | 航空航天系列 AL-P2024-T3511铝合金 1.2mm≤a或D≤150mm的挤压棒材和型材 | Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections 1.2 mm ≤ a or D ≤ 150 mm |
| EN 2326-1992 | 航空航天系列 AL-P6082-T6铝合金 D ≤ 200 mm的挤压棒材和型材 | Aerospace series - Aluminium alloy AL-P6082-T6; extruded bars and sections a or D ≤ 200 mm |
| EN 2327-1987 | 航空航天系列 带有径向锯齿锁紧合金钢垫圈 尺寸 | Aerospace series - Washers, lock with radial serrations in alloy steel - Dimensions |
| EN 23312-1993 | 绕结金属材料和硬质合金 弹性模量的测定 | Sintered metal and hardmetals; determination of Young moduls (ISO 3312:1987) |
| EN 23326-1993 | 硬质合金 （磁化）矫顽磁力的测定 | Hardmetals; determination of (the magnetization) coercivity (ISO 3326:1975) |
| EN 23327-1993 | 硬质合金 横向断裂强度的测定 | Hardmetals- Ddetermination of transverse rupture strength (ISO 3327:1982) |
| EN 2334-1997 | 航空航天系列 铝和铝合金铬硫酸洗液 | Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
| EN 23369-1993 | 致密烧结金属材料和硬质合金 密度的测定 | Impermeable sintered metal materials and hardmetals- Ddetermination of density (ISO 3369:1975) |
| EN 2338-2001 | 航空航天系列 热轧钛和钛合金薄板 厚度0.8 mm≤ a ≤ 6 mm 尺寸 | Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0.8 mm ≤ a ≤ 6 mm - Dimensions |
| EN 2339-2001 | 航空航天系列 热轧钛和钛合金薄板 厚度0.2 mm ≤ a ≤ 6 mm 尺寸 | Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0.2 mm ≤ a ≤ 6 mm - Dimensions |
| EN 2344-2001 | 航空航天系列 机械加工的耐热合金圆棒材 直径10 mm≤ D ≤ 180 mm 尺寸 | Aerospace series - Round bars, machined in heat resisting alloys - Diameter 10 mm ≤ D ≤ 180 mm - Dimensions |
| EN 2365-1989 | 航空航天系列 铝合金轴环 | Aerospace series; collars, aluminium alloy |
| EN 2381-1992 | 航空航天系列 AL-P7009-T7452铝合金 40 mm≤ a ≤ 150 mm手工锻件 | Aerospace series- Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm ≤ a ≤ 150 mm |
| EN 2384-1992 | 航空航天系列 AL-P2014A-T6511铝合金 a或D≤ 150 mm挤压棒材和型材 | Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bars and sections a or D ≤ 150 mm |
| EN 2385-1992 | 航空航天系列 AL-P7009-T74511铝合金 a或D≤ 125mm挤压棒材和型材 | Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm |
| EN 23878-1993 | 硬质合金 维氏硬度试验 | Hardmetals; Vickers hardness test (ISO 3878:1983) |
| EN 23907-1993 | 硬质合金 总碳含量的测定 重量法 | Hardmetals- Determination of total carbon content- Gravimetric method (ISO 3907:1985) |
| EN 23908-1993 | 硬质合金 不溶性(游离)碳含量的测定 重量法 | Hardmetals Determination of insoluble (free) carbon content- Gravimetric method (ISO 3908:1985) |
| EN 23909-1993 | 硬质合金 钴含量的测定 电位滴定法 | Hardmetals- Determination of cobalt- Potentiometric method (ISO 3909:1976) |
| EN 2395-1994 | 航空航天系列 AL-P2014A-T4或T42铝合金 0.4 mm ≤ a ≤ 6 mm薄板材和带材 | Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Sheet and strip - 0.4 mm ≤ a ≤ 6 mm |
| EN 2413-1995 | 航空航天系列 镀镉合金钢制肩薄六角头高精度公差柄短螺纹螺栓 分类：1100MPa(在环境温 度下)/235℃ | Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
| EN 24159-1989 | 锰铁和硅锰铁合金 锰含量的测定 电势法 | Ferromanganese and ferrosilicomanganese; determination of manganese content; potentiometric method (ISO 4159, 1st edition 1978.12.15) |
| EN 2437-2001 | 航空航天系列 铝和铝合金用铬酸盐转化涂层(黄色) | Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys |
| EN 24489-1993 | 绕结硬质合金制品 取样和试验 | Sintered hardmetals; sampling and testing (ISO 4489:1978) |
| EN 24492-1993 | 金属粉未 不包括硬质合金粉末 末压实与绕结有关的尺寸变化的测定 | Metallic powders, excluding powders for hardmetals - Determination of dimensional changes associated with compacting and sintering (ISO 4492:1985) |
| EN 24499-1993 | 硬质合金 显微组织的金相检验 | Hardmetals - Metallographic determination of microstructure (ISO 4499:1978) |
| EN 24501-1993 | 硬质合金 钛含量的测定 过氧化物光度法 | Hardmetals - Determination of titanium - Photometric peroxide method (ISO 4501:1978) |
| EN 24503-1993 | 硬质合金 用X射线荧光测定金属元素的含量 熔化法 | Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Fusion method (ISO 4503:1978) |
| EN 24505-1993 | 硬质合金 孔隙度和游离碳的金相测定 | Hardmetals - Metallographic determination of porosity and uncombined carbon (ISO 4505:1978) |
| EN 24506-1993 | 硬质合金 压缩试验 | Hardmetals; compression test (ISO 4506:1979) |
| EN 24883-1993 | 硬质合金 用X射线荧光测定金属元素的含量 溶液法 | Hardmetals - Determination of contents of metallic elements by X-ray fluorescence - Solution method (ISO 4883:1978) |
| EN 24884-1993 | 硬质合金 用烧结试件进行粉未的取样和试验 | Hardmetals; sampling and testing of powders using sintered test pieces (ISO 4884:1978) |
| EN 2497-1989 | 航空航天系列 钛与钛合金干喷砂 | Aerospace series - Dry abrasive blasting of titanium and titanium alloys |
| EN 2516-1997 | 航空航天系列 耐蚀钢钝化和镍基合金纯化 | Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel base alloys |
| EN 2536-1995 | 航空航天系列 铝合金的硬阳极氧化处理 | Aerospace series - Hard anodizing of aluminium alloys |
| EN 2545-1-1995 | 航空航天系列 钛和钛合金再熔坯料和铸件 技术规范 第1部分：一般要求 | Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 1: General requirements |
| EN 2545-2-1995 | 航空航天系列 钛和钛合金再熔坯料和铸件 技术规范 第2部分：再熔坯料 | Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 2: Remelting stock |
| EN 2545-3-1995 | 航空航天系列 钛和钛合金制再熔坯料和铸件 技术条件 第3部分：预制铸件和产品铸件 | Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 3: Pre-production and production castings |
| EN 2549-1995 | 航空航天系列 阳极氧化MOS2润滑的钛合金制普通六角头紧公差标准柄短螺纹螺栓 等级：1100MPa（环境温度）/ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| EN 2583-1997 | 航空航天系列 NI-PH2601(铬镍铁合金718)耐热镍基合金MJ螺纹螺栓 等级：1275MPa( 环境温度)/650℃ 技术规 | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃ - Technical specification |
| EN 2599-2001 | 航空航天系列 铝和铝合金带条 厚度 0.25 mm ≤ a≤ 3.2 mm 尺寸 | Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0.25 mm≤ a ≤ 3.2 mm - Dimensions |
| EN 2609-1988 | 航空航天系列 铜锌合金操纵钢索转筒规范 尺寸和负载 | Aerospace series - Turnbarrels, control cable in copper-zinc alloys; Dimensions and loads |
| EN 2617-2001 | 航空航天系列 钛和钛合金板 厚度6 mm ≤ a≤ 100 mm 尺寸 | Aerospace series - Plates in titanium and titanium alloys - Thickness 6 mm ≤ a ≤ 100 mm - Dimensions |
| EN 2630-1993 | 航空航天系列 AL-P7009-T74511铝合金有a或D ≤125mm的周围有粗粒控制的挤压棒材和型材 | Aerospace series - Aluminium alloy Al-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm with peripheral coarse grain control |
| EN 2632-1993 | 航空航天系列 AL-P7075-T73511铝合金a或D≤100mm的周围有粗粒控制的挤压棒材和型材 | Aerospace series - Aluminium alloy Al-P7075-T73511 - Extruded bars and sections a or D ≤ 100 mm with peripheral coarse grain control |
| EN 2633-1993 | 航空航天系列 AL-P2024-T3511铝合金a或D≤150mm的周围有粗粒控制的挤压棒材和型材 | Aerospace series - Aluminium alloy Al-P2024-T3511 - Extruded bars and sections 1.2 mm ≤ a or D ≤ 150 mm with peripheral coarse grain control |
| EN 2636-1993 | 航空航天系列 AL-P6082-T6铝合金铝合金a或D≤200mm的周围有粗粒控制的挤压棒材和型材 | Aerospace series - Aluminium alloy Al-P6082-T6 - Extruded bars and sections a or D ≤ 200 mm with peripheral coarse grain control |
| EN 2647-1995 | 航空航天系列 二硫化钼（MoS2） 润滑的镀镉合金钢制自锁球座六角螺母：等级 900 MPa (环境温度)/235℃ | Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235℃ |
| EN 2648-1995 | 航空航天系列 镀镉合金钢凹形垫圈 | Aerospace series - Washers, concave, in alloy steel, cadmium plated |
| EN 2649-1995 | 航空航天系列 镀镉合金钢头全螺纹的盘形头有槽螺钉 等级：900MPa(环境温度)/235℃ | Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
| EN 2652-1997 | 航空航天系列 镀镉合金钢100°普通埋头全螺纹有槽螺钉 等级：900MPa(环境温度)/235℃ | Aerospace series - Screws, 100°countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification ： 900 MPa (at ambient temperature)/235℃ |
| EN 2693-1993 | 航空航天系列 AL-P5086-H111铝合金 薄板和带材 0.3 ≤ a≤6 mm | Aerospace series - Aluminium alloy Al-P5086-H111 - Sheet and strip 0.3 ≤ a ≤6 mm |
| EN 2694-1993 | 航空航天系列 AL-P6061-T6或T62铝合金 薄板和带材 0.4 ≤a≤6 mm | Aerospace series - Aluminium alloy Al-P6061-T6 or T62 - Sheet and strip 0.4 ≤ a ≤6 mm |
| EN 2695-1993 | 航空航天系列 AL-P6081-T6铝合金 薄板和带材 0.3 ≤ a≤ 6 mm | Aerospace series - Aluminium alloy Al-P6081-T6 - Sheet and strip 0.3 ≤ a ≤6 mm |
| EN 2696-1993 | 航空航天系列 AL-P7075-T6或T62铝合金 薄板和带材 0.4 ≤ a≤ 6 mm | Aerospace series - Aluminium alloy Al-P7075-T6 or T62 - Sheet and strip 0.4≤ a ≤6 mm |
| EN 27526-1991 | 镍、镍铁和镍合金 硫含量的测定 感应电炉燃烧后红外线吸收法 | Nickel, ferronickel and nickel alloys; determination of sulfur content; infra-red absorption method after induction furnace combustion (ISO 7526:1985) |
| EN 27527-1991 | 镍、镍铁和镍合金 硫含量的测定 感应电炉燃烧后碘量滴定法 | Nickel, ferronickel and nickel alloys; determination of sulfur content; iodometric titration method after induction furnace combustion (ISO 7527:1985) |
| EN 2753-1996 | 航空航天系列 MoS2润滑镀镉合金钢制扩孔单耳自锁固定系紧螺母 等级：1100MPa(环境温度)/235℃ | Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235℃ |
| EN 27627-1-1993 | 硬质合金 火焰原子吸收光谱法的化学分析 第1部分：一般要求 | Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 1: general requirements (ISO 7627-1:1983) |
| EN 27627-2-1993 | 硬质合金 火焰原子吸收光谱法的化学分析 第2部分：钙、钾、镁和钠含量0.001-0.02 %(m/m)的测定 | Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 2: determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m) (ISO 7627-2:1983) |
| EN 27627-3-1993 | 硬质合金 火焰原子吸收光谱法的化学分析 第3部分：钴、铁、锰和镍0.01-0.5%( m/m)的测定 | Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 3: determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m) (ISO 7627-3:1983) |
| EN 27627-4-1993 | 硬质合金 火焰原子吸收光谱法的化学分析 第4部分：钼、钛和钒含量0.01-0.5%( m/m)的测定 | Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 4: determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m) (ISO 7627-4:1983) |
| EN 27627-5-1993 | 硬质合金 火焰原子吸收光谱法的化学分析 第5部分：钴、铁、钼、镍、钛和钒含量0.5-2%(m/m )的测定 | Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 5: determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m) (ISO 7627-5:1983) |
| EN 27627-6-1993 | 硬质合金 火焰原子吸收光谱法的化学分析 第6部分：铬含量在0.01-2%( m/m)的测定 | Hardmetals; chemical analysis by flame atomic absorption spectrometry; part 6: determination of chromium in contents from 0,01 to 2 % (m/m) (ISO 7627-6:1985) |
| EN 27787-3-1993 | 牙科旋转器械 切割工具 第3部分：技工室研磨机用质合金刀具 | Dental rotary instruments; Cutters; Part 3: Carbide laboratory cutters for milling machines (ISO 7787-3:1991) |
| EN 28050-1992 | 镍铁合金锭或块 分析取样 | Ferronickel ingots or pieces; sampling for analysis (ISO 8050:1988) |
| EN 2808-1997 | 航空航天系列 钛和钛合金阳极氧化 | Aerospace series - Anodizing of titanium and titanium alloys |
| EN 2859-1995 | 航空航天系列 镀镉合金钢制标准六角头紧公差普通柄短螺纹螺栓 等级：1100 MPa (环境温度)/235℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
| EN 286-4-1994 | 装空气或氮气的简单不着火的压力容器 第4部分：铁路运输车辆气动刹车设备和辅助气动设备用的铝合金压力容 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| EN 28654-1992 | 金合金颜色 定义、颜色范围和标记 | Colours of gold alloys - Definition, range of colours and designation (ISO 8654:1987) |
| EN 287-2-1992+A1-1997 | 焊机的合格性测试 熔焊 第2部分：铝和铝合金 | Approval testing of welders; fusion welding; part 2: aluminium and aluminium alloys |
| EN 2870-1996+AC-1996 | 航空航天系列 阳极氧化钛合金标准双六角头紧公差普通柄MoS2润滑的短螺纹螺栓 等级：1100MPa(环境温度)/31 | Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| EN 2874-1996+AC-1996 | 航空航天系列 钝化、耐热镍基合金制双六角头紧公差普通柄中长螺纹螺栓 等级：1550MPa(环境温度)/315℃ | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315℃ |
| EN 288-4-1992+A1-1997 | 金属材料焊接程序规范和鉴定 第4部分：铝及其合金的电弧焊焊接程序试验 | Specification and approval of welding procedures for metallic materials; part 4: welding procedure tests for the arc welding of aluminium and its alloys |
| EN 2884-1996 | 航空航天系列 用MoS2润滑阳极氧化钛合金制短螺纹松公差普通柄偏置十字盘形头凹槽螺钉 等级：1100 MPa (环 | Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| EN 2885-1996 | 航空航天系列 镀镉合金钢制短螺纹松公差退柄偏置十字盘头凹槽螺钉 等级：900MPa(环境温度)/235℃ | Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
| EN 2886-1996 | 航空航天系列 镀镉合金钢偏置十字凹槽紧公差普通柄短螺纹螺钉 等级： 900MPa(环境温度)/235℃ | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
| EN 2889-1995 | 航空航天系列 镀镉合金钢标准六角头紧公差普通柄短螺纹螺栓 等级：900MPa (环境温度)/235℃ | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short threaded, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 ℃ |
| EN 2897-1996 | 航空航天系列 镀镉合金钢制盘头偏置十字凹槽紧公差普通柄短螺纹螺钉 等级：1100MPa(环境温度)/235℃ | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 ℃ |
| EN 2912-1996 | 航空航天系列 阳极氧化或铬酸盐处理铝合金制大直径平垫圈 | Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated |
| EN 29202-1992 | 首饰 贵金属合金的纯度 | Jewellery - Fineness of precious metall alloys (ISO 9202:1991) |
| EN 2927-1996 | 航空航天系列 NI-P100HT(Inconel 718)耐热镍基合金制长螺纹细柄双六角头螺钉 等级：1275 MPa(环境温度)/6 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃ |
| EN 2928-1996 | 航空航天系列 NI-P100HT(Inconel 718)耐热镍基合金制镀银长螺纹细柄双六角头螺钉 等级：1275 MPa(环境温 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650℃ |
| EN 2929-1996 | 航空航天系列 NI-P100HT(一种耐热镍基合金)耐热镍基合金制长螺纹细柄双六角头螺钉 等级：1210 MPa(环境温 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ℃ |
| EN 2930-1996 | 航空航天系列 NI-P101HT(Waspaloy 一种耐高温热镍基合金)耐热镍基合金镀银长螺纹细柄双六角头螺钉 等级： | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 ℃ |
| EN 2933-1996 | 航空航天系列 NI-P100HT718)耐热镍基合金镀银长螺纹细螺柄T形头螺栓 等级：1275 MPa(环境温度)/650℃ | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 ℃ |
| EN 2934-1996 | 航空航天系列 合金NI-P100HT((铬镍铁合金718)耐热镍基镀银长螺纹细螺柄T形头螺栓 等级：1275 MPa(环境温 | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 ℃ |
| EN 2935-1996 | 航空航天系列 NI-P101HT(沃斯帕洛尹合金)耐热镍基合金镀银长螺纹细螺柄T形头螺栓 等级：1210 MPa(环境温 | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 2936-1996 | 航空航天系列 合金NI-P101HT(沃斯帕洛尹合金)耐热镍基镀银长螺纹细螺柄T形头螺栓 等级：1210 MPa(环境温 | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 2942-1998 | 航空航天系列 NI-PH2801(铬镍铁合金X750)耐热镍基合金镀银螺旋形自锁式螺纹插件 | Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated |
| EN 29453-1993 | 软钎料合金 化学成分和形式 | Soft solder alloys; chemical compositions and forms (ISO 9453:1990) |
| EN 2955-1993 | 航空航天系列 钛和钛合金废料的回收 | Aerospace series; recycling of titanium and titanium alloy scrap |
| EN 30042-1994 | 铝和铝焊合金弧焊接头 缺陷质量分级指南 | Arc-welded joints in aluminium and its weldable alloys - Guidance on quality levels for imperfections (ISO 10042:1992) |
| EN 3005-2003 | 航空航天系列 NI-P101HT (Waspaloy)耐热低镍合金自锁螺母 等级： 1210 MPa/730 ℃ 技术规范 | Aerospace series - Nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa/730℃; Technical specification / Note: To be replaced by prEN 3005 (2003-05). |
| EN 3008-1998 | 航空航天系列 NI-P100HT(铬镍铁合金718) 耐热镍基合金长螺纹细柄六角头螺栓 等级：1275MPa(环境温度)/650 | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃ |
| EN 3009-1998 | 航空航天系列 镀银NI-P100HT(铬镍铁合金718) 耐热镍基合金长螺纹细柄六角头螺 栓 等级：1275MPa(环境温度 | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650℃ |
| EN 3010-1998 | 航空航天系列 NI-P101HT(沃斯帕洛尹合金)耐热镍基合金长螺纹细柄六角头螺栓 等级：1210MPa(环境温度)/730 | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 3011-1998 | 航空航天系列 镀银NI-P101HT(沃斯帕洛尹合金)耐热镍基合金长螺纹细柄六角头螺栓 等级：1210MPa(环境温度) | Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 3012-1995 | 航空航天系列 HI-P101HT耐热镍基合金自锁十二角螺母 等级：1210MPa(环境温度)/ 730℃ | Aerospace series - Nuts, bihexagonal, self-locking, in heat-resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 3013-1995 | 航空航天系列 镀银HI-P101HT耐热镍基合金自锁十二角螺母 等级：1210MPa(环境温度)/730℃ | Aerospace series - Nuts, bihexagonal, self-locking, in heat-resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 3015-2001 | 航空航天系列 镀银 FE-PA2601 (A286)耐热合金自锁锯形杆螺母 等级：1100 MPa (环境温度)/650℃ | Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650℃ |
| EN 3035-1996 | 航空航天系列 合金钢镀镉短螺纹紧公差普通柄偏置十字凹槽的100°标准埋头螺钉 等级：1100MPa(环境温度)/2 | Aerospace series - Screws, 100°countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
| EN 3037-1996 | 航空航天系列 阳极氧化MoS2润滑钛合金短螺纹紧公差普通柄偏置十字凹槽盘头螺钉 等级：1100MPa(环境温度)/ | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| EN 3063-1994 | 航空航天系列 NI-P101HT耐热钢镍基合金制中螺纹紧公差柄双六角头螺栓 等级： 1210MPa(环境温度)730℃ | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 3081-2001 | 航空航天系列 钛合金管连接件8°30′修理用带动态梁密封端头的焊接箍圈 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Ferrules, welded with dynamic beam seal end, for repair |
| EN 3082-2001+AC-2003 | 航空航天系列 钛合金管连接件8°30′修理用焊接端的舱壁管接头 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Unions, bulkhead welded end, for repair |
| EN 3083-2001+AC-2003 | 航空航天系列 钛合金管连接件8°30′修理用长焊接端舱壁管接头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead, long welded end, for repair |
| EN 3084-2001+AC-2003 | 航空航天系列 钛合金管连接件8°30′修理用焊接端螺纹管接头 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Unions, welded end threaded for repair |
| EN 3112-1995 | 航空航天系列 镀镉合金钢全螺纹头标准六角头螺栓 分级：大气压为900 MPa（环境温度） 235 ℃ | Aerospace series - Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
| EN 3141-1996 | 航空航天系列 NI-P11 耐热镍基合金镀镉普通头实心铆钉 英制系列 | Aerospace series - Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, cadmium plated, inch based series |
| EN 3142-1996 | 航空航天系列 NI-P11耐热镍基合金普通头实心铆钉 英制系列 | Aerospace series - Rivets, solid, universal head, in heat resisting nickel base alloy NI-P11, inch based series |
| EN 31427-1994+AC-1994 | 银合金首饰中银含量的测定 溴化钾容量法(电位滴定) | Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide (ISO 11427:1993) |
| EN 3150-1995 | 航空航天系列 NI-P100HT (铬-镍-铁合金 718) 耐热镍基型合金制肩式无头销 | Aerospace series - Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718) |
| EN 3151-1995 | 航空航天系列 NI-P100HI(铬-镍-铁合金 718) 耐热镍基合金制普通销 | Aerospace series - Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718) |
| EN 3236-1998 | 航空航天系列 镀银耐热镍基合金NI-P100HT(铬镍铁合金718) 薄壁自锁紧短内螺纹插件 | Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread |
| EN 3237-1998 | 航空航天系列 镀银耐热镍基合金NI-P100HT(铬镍铁合金718) 薄壁自锁紧长内 螺纹插件 | Aerospace series - Inserts, thin wall, self-locking, long, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread |
| EN 3239-1995 | 航空航天系列 镀银HI-P101HT耐热镍基合金自锁十二角螺母 等级：1210 MPa(环境温度)/730℃ | Aerospace series - Nuts, bihexagonal, self-locking, in heat-resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 3243-2001 | 航空航天系列 钛合金管连接件8°30′ 带动态梁密封端头的焊接箍 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Ferrule, welded, with dynamic beam seal end |
| EN 3244-2001 | 航空航天系列 钛合金管连接件8°30′双端口管接头 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, double ended |
| EN 3245-2001 | 航空航天系列 钛合金管连接件8°30′ 异径管接头 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, reducer |
| EN 3246-2001 | 航空航天系列 钛合金管连接件8°30′舱壁管接头 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, bulkhead |
| EN 3247-2001 | 航空航天系列 钛合金管连接件8°30′舱壁焊接端管接头 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, bulkhead welded end |
| EN 3248-2001 | 航空航天系列 钛合金管连接件8°30′带锁异径管端管接头 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Adaptors, reduced pipe end, with lockring |
| EN 3264-2001 | 航空航天系列 钛合金管连接件8°30′ 止推金属丝螺母 | Aerospace series - Pipe coupling 8°30′ in titanium alloy - Thrust wire nut |
| EN 3266-2001 | 航空航天系列 钛合金管连接 舱壁螺母 | Aerospace series - Pipe coupling in titanium alloy - Bulkhead nut |
| EN 3267-2001 | 航空航天系列 垫圈钛合金 舱壁 | Aerospace series - Washers, bulkhead in titanium alloy |
| EN 3268-2001 | 航空航天系列 钛合金管连接件8°30′ 压力塞 | Aerospace series - Pipe coupling 8? 30 in titanium alloy - Pressure plug |
| EN 3269-2001 | 航空航天系列 钛合金管连接件8°30′ 带动态梁密封端头的盲箍 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Ferrules, blind, with dynamic beam seal end |
| EN 3270-2001+AC-2003 | 航空航天系列 钛合金管连接件8°30′ 带锁紧装置堵头 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Blanking plugs with lockring |
| EN 3272-2001 | 航空航天系列 钛合金管连接件8°30′带动态梁密封端头的焊接金属箍 几何结构 | Aerospace series - Pipe coupling 8?30 - Dynamic beam seal end for ferrule, welded; Geometric configuration |
| EN 3273-2001 | 航空航天系列 钛合金管连接件8°30′ 带动态梁密封端的弯管、十字管和三通接头 几何结构 | Aerospace series - Pipe coupling 8?30 - Dynamic beam seal end for elbows, tees and crosses; Geometric configuration |
| EN 3297-1998 | 航空航天系列 NI-P100HT(铬镍铁合金718)耐热镍基合金MJ螺纹薄壁自锁紧插件 技术规范 | Aerospace series - Inserts, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Technical specification |
| EN 3303-1997 | 航空航天系列 镀镉合金钢六角凹头粗公差普通柄中等长度螺纹帽螺钉 等级：1100MPa(环境温度)/235℃ | Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
| EN 3304-1996 | 航空航天系列 氧极氧化钛合金MoS2润滑短螺纹紧公差普通柄偏置十字凹槽100°埋头矮头螺钉 等级：1100MPa( | Aerospace series - Screws, 100°countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| EN 3305-1996 | 航空航天系列 镀镉合金钢短螺纹紧公差普通柄偏置十字凹槽100°埋头矮头螺钉 等级：1100MPa(环境温度)/235 | Aerospace series - Screws, 100°countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
| EN 3306-1996 | 航空航天系列 阳极氧化MoS2润滑钛合金钢制100度埋头标准头谝置十字凹槽全螺纹螺丝 等级：1100MPa(环境温 | Aerospace series - Screws, 100°countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| EN 3307-1996 | 航空航天系列 阳极氧化钛合金MoS2润滑全螺纹偏置十字凹槽盘头螺钉 等级：1100 MPa(环境温度)/315℃ | Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| EN 3308-1996 | 航空航天系列 阳极氧化MoS2润滑钛合金钢制标准六角头全螺纹螺丝 等级：1100MPa(环境温度)/315℃ | Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ℃ |
| EN 3379-1996 | 航空航天系列 合金NI-P101HT(Waspaloy 一种耐高温热镍基合金)耐热镍基中长螺纹紧公差柄双六角螺栓 等级： | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730℃ |
| EN 3506-2001 | 航空航天系列 耐热合金热轧薄板和板材 厚度为 2.0 mm ≤a≤100 mm 尺寸 | Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2.0 mm≤ a ≤ 100 mm - Dimensions |
| EN 3542-1998 | 航空航天系列 耐热镍基合金NI-PH2801(铬镍铁合金X750)螺旋形线圈自锁式螺纹插件 | Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2081 (Inconel X750) |
| EN 3561-2001+AC-2003 | 航空航天系列 钛合金管连接件8°30′具有动态梁密封端箍圈 焊接和轧制管端口 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end |
| EN 3566-2001+AC-2003 | 航空航天系列 钛合金管连接件8°30′具有锁环的管接头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Adaptors with lockring |
| EN 3665-1997 | 航空航天系列 色漆和清漆的检验方法 铝合金耐线状腐蚀的检验 | Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys |
| EN 3688-2001+AC-2003 | 航空航天系列 钛合金焊接管用的T形环填缝金属 14000 kPa标准压强 | Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14000 kPa nominal pressure |
| EN 3689-2001+AC-2003 | 航空航天系列 钛合金焊接管用的T形环填缝金属 28000 kPa标准压强 | Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure |
| EN 3690-2001+AC-2003 | 航空航天系列 钛合金管连接8°30′长舱壁管接头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead, long |
| EN 3691-2001+AC-2003 | 航空航天系列 钛合金管连接8°30′长焊舱壁管接头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead, long welded |
| EN 3724-2003 | 航空航天系列 钛合金TI-P64001 MoS2润滑细柄长螺纹双六边头螺栓 等级： 1100 MPa (环境温度) | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Classification: 1 100 MPa (at ambient temperature) / Note: To be replaced by prEN 3724 (2003-05). |
| EN 3725-2003 | 航空航天系列 钛合金 TI-P640001 MoS2润滑盘头六瓣槽普通柄长螺纹螺栓 等级：1100 MPa（环境温度） | Aerospace series - Bolts, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Classification: 1 100 MPa (at ambient temparature) / Note: To be replaced by prEN 3725 (2003-05). |
| EN 3730-2001 | 航空航天系列 具有橡胶缓冲的铝合金鞍壮固定和滑动型夹箍 尺寸质量 | Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses |
| EN 3740-1996 | 航空航天系列 阳极氧化MoS2润滑钛合金短螺纹紧公差柄薄六角头带肩螺栓、等级：1100MPa(环境温度）/315℃ | Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| EN 3769-1997 | 航空航天系列 耐蚀钢和耐高热合金钢的电解抛光 | Aerospace series - Electrolytic polishing of corrosion resisting steels and heat resisting alloys |
| EN 3818-2003 | 航空航天系列 TI-P640001钛合金带MJ螺纹用螺栓 等级： 1100 MPa（环境温度） 技术规范 | Aerospace series - Bolts with MJ threads, in titanium alloy TI-P64001 - Classification: 1 100 MPa (at ambient temperature); Technical specification / Note: To be replaced by prEN 3818 (2003-05). |
| EN 3832-2003 | 航空航天系列 NI-P100HT (Inconel 718)耐热镍基合金、 双六角头细柄长螺纹螺栓 等级：1550 MPa（环境温 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 3832 (2003-05). |
| EN 3833-2003 | 航空航天系列 NI-PH2601 (Inconel 718)耐热镍基合金、 MJ螺纹螺栓 等级：1550 MPa（环境温度）650 ℃ | Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650℃; Technical specification / Note: To be replaced by prEN 3833 (2003-05). |
| EN 3851-2003 | 航空航天系列 钛合金TI-P64001 球形60°管连接 直的旋转螺母 | Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Swivel nuts, straight |
| EN 3852-2002 | 航空航天系列 钛合金TI-P64001 球形60°管连接 焊接螺纹式直联管节 | Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded |
| EN 3853-2002 | 航空航天系列 钛合金TI-P64001 球形60°管连接 螺纹式直联管节 | Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Straight unions, threaded |
| EN 3854-2002 | 航空航天系列 钛合金TI-P64001 球形60°管连接 焊接金属箍 | Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Ferrules, welded |
| EN 3855-2002 | 航空航天系列 钛合金TI-P64001 球形60°管连接 金属帽 | Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Caps |
| EN 3856-2002 | 航空航天系列 钛合金TI-P64001 球形60°管连接 止推丝用旋转螺母 | Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire |
| EN 3857-2002 | 航空航天系列 钛合金TI-P64001 球形60°管连接 焊接90°弯头 | Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Elbows 90? welded |
| EN 3858-2002 | 航空航天系列 钛合金TI-P64001 球形60°管连接 FE-PA 13钢止推丝 | Aerospace series - Pipe couplings, 60? spherical, in titanium alloy TI-P64001 - Thrust wires in steel FE-PA 13 |
| EN 3867-2003 | 航空航天系列 管连接 松套法兰和密封垫 TI-P64001钛合金法兰 | Aerospace series - Pipe couplings, loose flanges and seals - Flanges in titanium alloy TI-P64001 / Note: To be replaced by prEN 3867 (2003-05). |
| EN 3868-2003 | 航空航天系列 管连接 松套法兰和密封垫 TI-P64001钛合金焊接法兰连接器 | Aerospace series - Pipe couplings, loose flanges and seals - Flange connectors, welded, in titanium alloy TI-P64001 / Note: To be replaced by prEN 3868 (2003-05). |
| EN 3869-2003 | 航空航天系列 管连接 松套法兰和密封垫 碳氟橡胶垫和铝合金附件 | Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy / Note: To be replaced by prEN 3869 (2003-05). |
| EN 3882-2001 | 航空航天系列 耐热合金NI-WH1801(NiCr20Co18Ti3Al2) 焊接用填缝金属 | Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler metal for welding |
| EN 3883-2001 | 航空航天系列 耐热合金 NI-WH2301(NiCr22Fe19Mo9Co2) 焊接用填缝金属 | Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding |
| EN 3884-2001 | 航空航天系列 耐热合金 NI-WH2601(NiCr19Nb5Mo3Ti) 焊接用填缝金属 | Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding |
| EN 3885-2001 | 航空航天系列 耐热合金 NI-WH3601(NiCr22Mo9Nb4) 焊接用填缝金属 | Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding |
| EN 3886-2001 | 航空航天系列 耐热合金 NI-WH1303(NiCo20Cr20Mo5Ti2AI) 焊接用填缝金属 | Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2AI) - Filler metal for welding |
| EN 3887-2001 | 航空航天系列 耐热合金 CO-WH4101(CoCr20W15Ni） 焊接用填缝金属 | Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding |
| EN 3888-2001 | 航空航天系列 耐热合金 CO-WH1402(CoCr22Ni22W15) 焊接用填缝金属 | Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding |
| EN 3892-2001 | 航空航天系列 钛合金 TI-W64001 焊接用填缝金属 | Aerospace series - Titanium alloy TI-W64001 - Filler metal for welding |
| EN 3893-2001 | 航空航天系列 钛合金 TI-W19001 焊接用填缝金属 | Aerospace series - Titanium alloy TI-W19001 - Filler metal for welding |
| EN 3894-2001 | 航空航天系列 耐热合金 NI-WD3201(NiMo25Fe6Cr5） 焊接用填缝金属 | Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding |
| EN 3895-2001 | 航空航天系列 耐热合金 NI-WH3901(NiCr16Mo15) 焊接用填缝金属 | Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding |
| EN 3907-2003 | 航空航天系列 钛合金TI-P640001, MoS2润滑、双六角头普通柄长螺纹螺栓 等级：1100 MPa (环境温度)/350℃ | Aerospace series - Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS<(Index)2> coated - Classification: 1 100 MPa (at ambient temperature)/350℃ / Note: To be replaced by prEN 3907 (2003-05). |
| EN 3917-1998 | 航空航天系列 镍基合金NI-B41201(NiCr14Si5B3C)、钎焊用填缝金属粉末或糊料 | Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Powder or paste |
| EN 3918-1998 | 航空航天系列 镍基合金NI-B41201(NiCr14Si5B3C)、钎焊用填缝金属窄条带材 | Aerospace series - Nickel base alloy NI-B41201 (NiCr14Si5B3C) - Filler metal for brazing - Tape |
| EN 3919-1998 | 航空航天系列 镍基合金NI-B41201(NiCr14Si5B3C)、钎焊用填缝金属非晶质箔 | Aerospace series - Nickel base alloy NI-B41202 (NiCr14Si5B3) - Filler metal for brazing - Amorphous foil |
| EN 3920-2001 | 航空航天系列 镍基合金NI-B41201(NiCr14Fe5Si5B3) 钎焊用填缝金属粉末或糊料 | Aerospace series - Nickel base alloy NI-B41202 (NiCr14Fe5Si5B3) - Filler metal for brazing; Powder or paste |
| EN 3921-2001 | 航空航天系列 镍基合金 NI-B41203 (NiCr7Si5B3)、钎焊用填缝金属非晶质箔 | Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing; Amorphous foil |
| EN 3922-1998 | 航空航天系列 镍基合金NI-B41203(NiCr7Si5B3)、钎焊用填缝金属硼化物箔 | Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Borided foil |
| EN 3923-2001 | 航空航天系列 镍基合金NI-B41203(NiCr7Si5B3Fe3)、钎焊用填缝金属粉末和糊料 | Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing; Powder or paste |
| EN 3924-1998 | 航空航天系列 镍基合金NI-B41203(NiCr7Si5B3)、钎焊用填缝金属窄条带材 | Aerospace series - Nickel base alloy NI-B41203 (NiCr7Si5B3) - Filler metal for brazing - Tape |
| EN 3925-2001 | 航空航天系列 镍基合金NI-B40001(NiSi5B3) 钎焊用填缝金属非晶质箔 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing; Amorphous foil |
| EN 3926-2001 | 航空航天系列 镍基合金NI-B40001(NiSi5B3) 钎焊用填缝金属硼化物箔 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing; Borided foil |
| EN 3927-2001 | 航空航天系列 镍基合金NI-B40001(NiSi5B3) 钎焊用填缝金属粉末和糊料 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing; Powder or paste |
| EN 3928-1998 | 航空航天系列 镍基合金NI-B40001(NiSi5B3) 钎焊用填缝金属窄条带材 | Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Tape |
| EN 3930-2001 | 航空航天系列 镍基合金NI-B40001(NiSi5B3) 钎焊用填缝金属粉末和糊料 | Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing; Powder or paste |
| EN 3931-1998 | 航空航天系列 镍基合金NI-B31001(NiCr19Si10) 钎焊用填缝金属窄条带材 | Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Tape |
| EN 3932-2001 | 航空航天系列 镍基合金 NI-B13001(NiP11)钎焊用填缝金属非晶质箔 | Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing; Amorphous foil |
| EN 3933-2001 | 航空航天系列 镍基合金 NI-B13001(NiP11) 钎焊用填缝金属粉末和糊料 | Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing; Powder or paste |
| EN 3934-2001 | 航空航天系列 镍基合金 NI-B21001(NiCr15B4) 钎焊用填缝金属非晶质箔 | Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing; Amorphous foil |
| EN 3935-2001 | 航空航天系列 镍基合金 NI-B21001(NiCr15B4) 钎焊用填缝金属硼化物箔 | Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing; Borided foil |
| EN 3936-2001 | 航空航天系列 镍基合金 NI-B21001(NiCr15B4) 钎焊用填缝金属粉末和糊料 | Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing; Powder or paste |
| EN 3937-2001 | 航空航天系列 镍基合金 NI-B21001(NiCr15B4) 钎焊用填缝金属非晶质箔 | Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing; Powder or paste |
| EN 3938-2001 | 航空航天系列 镍基合金 NI-B46001(NiCo20Si5B3) 钎焊用填缝金属非晶质箔 | Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing; Amorphous foil |
| EN 3939-2001 | 航空航天系列 镍基合金 NI-B46001(NiCo20Si5B3) 钎焊用填缝金属粉末和糊料 | Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing; Powder or paste |
| EN 3940-1998 | 航空航天系列 镍基合金NI-B46001(NiCo20Si5B3) 钎焊用填缝金属窄条带材 | Aerospace series - Nickel base alloy NI-B46001 (NiCo20Si5B3) - Filler metal for brazing - Tape |
| EN 3941-2001 | 航空航天系列 镍基合金 NI-B41204(NiCr13Si4B3) 钎焊用填缝金属非晶质箔 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing; Amorphous foil |
| EN 3942-2001 | 航空航天系列 镍基合金NI-B41204(NiCr13Si4B3) 钎铜焊用填缝金属硼化物箔 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing; Borided foil |
| EN 3943-2001 | 航空航天系列 镍基合金NI-B41204(NiCr13Si4B3) 钎焊用填缝金属粉末和糊料 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing; Powder or paste |
| EN 3944-1998 | 航空航天系列 镍基合金NI-B41204(NiCr13Si4B3) 钎焊用填缝金属窄条带材 | Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Tape |
| EN 3945-2001 | 航空航天系列 镍基合金 NI-B48801(NiMn19Si6Cu4B) 钎焊用填缝金属粉末和糊料 | Aerospace series - Nickel base alloy NI-B48801 (NiMn19Si6Cu4B) - Filler metal for brazing; Powder or paste |
| EN 3946-2001 | 航空航天系列 镍基合金 NI-B15701(NiPd34Au30) 钎焊用填缝金属粉末和糊料 | Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing; Powder or paste |
| EN 3947-1998 | 航空航天系列 镍基合金NI-B15701(NiPd34Au30) 钎焊用填缝金属轧制箔 | Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Rolled foil |
| EN 3948-1998 | 航空航天系列 镍基合金NI-B15701(NiPd34Au30) 钎焊用填缝金属丝 | Aerospace series - Nickel base alloy NI-B15701 (NiPd34Au30) - Filler metal for brazing - Wire |
| EN 3952-2001 | 航空航天系列 银基合金 AG-B10001(AgCu28) 钎焊用填缝金属丝 | Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing; Wire |
| EN 3953-2001 | 航空航天系列 银基合金 AG-B12401(AgCu40Zn5Ni) 钎焊用填缝金属丝 | Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing; Wire |
| EN 3954-2001 | 航空航天系列 银基合金 AG-B12401(AgCu40Zn5Ni) 钎焊用填缝金属粉末和糊料 | Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing; Powder or paste |
| EN 3955-2001 | 航空航天系列 银基合金 AG-B12401(AgCu40Zn5Ni) 钎焊用填缝金属轧制箔 | Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing; Rolled foil |
| EN 3956-2001 | 航空航天系列 银基合金 AG-B14001(AgCu42Ni2) 钎焊用填缝金属丝 | Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing; Wire |
| EN 3957-2001 | 航空航天系列 银基合金 AG-B14001(AgCu42Ni2) 钎焊用填缝金属粉末和糊料 | Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing; Powder or paste |
| EN 3958-2001 | 航空航天系列 银基合金 AG-B14001(AgCu42Ni2) 钎焊用填缝金属轧制箔 | Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing; Rolled foil |
| EN 3959-2001 | 航空航天系列 钴基合金 CO-B41601(CoCr19Ni17Si8W4) 钎焊用填缝金属粉末和糊料 | Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing; Powder or paste |
| EN 3960-2001 | 航空航天系列 金基合金 AU-B40001(AuNi18) 钎焊用填缝金属粉末和糊料 | Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing; Powder or paste |
| EN 3961-2001 | 航空航天系列 金基合金 AU-B40001 钎焊用填缝金属轧制箔 | Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing; Rolled foil |
| EN 3962-2001 | 航空航天系列 金基合金 AU-B40001 钎焊用填缝金属丝 | Aerospace series - Gold base alloy AU-B40001 - Filler metal for brazing; Wire |
| EN 3965-2001 | 航空航天系列 钛合金TI-B17001 钎焊用填缝金属、轧制箔 | Aerospace series - Titanium alloy TI-B17001 - Filler metal for brazing; Rolled foil |
| EN 4009-2003 | 航空航天系列 耐热镍基合金 NI-P100HT (Inconel 718) 双六角头紧公差柄中长螺纹螺栓 等级：1550 MPa (常 | Aerospace series - Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650℃ / Note: To be replaced by prEN 4009 (2003-0 |
| EN 4011-2003 | 航空航天系列 耐热镍基合金 NI-P100HT (Inconel 718)镀银、双六角自锁螺母 等级： 1550 MPa (常温)/600℃ | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy, TI-P100HT (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600℃ / Note: To be replaced by prEN 4011 (2003-05). |
| EN 4012-2003 | 航空航天系列 耐热镍基合金 NI-P100HT (Inconel 718) MoS<(Index)2>润滑、双六角自锁螺母 等级：1550 MPa | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P100HT (Inconel 718), MoS<(Index)2> coated - Classification: 1500 MPa (at ambient temperature)/425℃ / Note: To be replaced by prEN 4012 (2003-05). |
| EN 4013-2003 | 航空航天系列 耐热镍基合金 NI-P100HT (Inconel 718)镀银 自锁带柄螺母 等级：1550 MPa (常温)/600℃ | Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600℃ / Note: To be replaced by prEN 4013 (2003-05). |
| EN 4017-2001 | 航空航天系列 钛合金管连接 8°0′90°弯头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90?国际标准分类号：49.080英文标准名称：Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90? |
| EN 4018-2001 | 航空航天系列 钛合金管连接 8°30′有推力丝螺母的90°弯头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90°with thrust wire nut |
| EN 4019-2001 | 航空航天系列 钛合金管连接 8°30′90°焊接端弯头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90°welded end |
| EN 4020-2001 | 航空航天系列 钛合金管连接 8°30′90°弯头 有推力丝螺母焊接端 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90° welded end with thrust wire nut |
| EN 4021-2001 | 航空航天系列 钛合金管连接 8°30′舱壁90°弯头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90°bulkhead |
| EN 4022-2001 | 航空航天系列 钛合金管连接 8°30′ 舱壁焊接端90°弯头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 90°bulkhead, welded end |
| EN 4023-2001 | 航空航天系列 钛合金管连接 8°30′弯头45° | Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 45? |
| EN 4024-2001 | 航空航天系列 钛合金管连接 8°30′有丝推力螺母焊接端45°弯头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 45°welded end with thrust wire nut |
| EN 4025-2001 | 航空航天系列 钛合金管连接 8°30′舱壁45°弯头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Elbows 45°bulkhead |
| EN 4026-2001 | 航空航天系列 钛合金管连接 8°30′三通接头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees |
| EN 4027-2001 | 航空航天系列 钛合金管连接 8°30′ 有推力丝螺母三通支管 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees branch with thrust wire nut |
| EN 4028-2001 | 航空航天系列 钛合金管连接 8°30′ 在管道上有推力丝螺母的三通 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees with thrust wire nut on run |
| EN 4029-2001 | 航空航天系列 钛合金管连接 8°30′ 舱壁Ｔ形支管 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees bulkhead branch |
| EN 4030-2001 | 航空航天系列 钛合金管连接 8°30′ 在管道上的Ｔ形舱壁 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees bulkhead on run |
| EN 4031-2001 | 航空航天系列 钛合金管连接 8°30′ 焊箍圈用螺母 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Nut for welded ferrule |
| EN 4032-2001+AC-2003 | 航空航天系列 钛合金管连接 8°30′ 推力丝 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Thrust wire |
| EN 4045-2001 | 航空航天系列 耐热合金无缝毛细管 直径0,6 mm≤D≤2 mm 尺寸 | Aerospace series - Capillary tubes, seamless in heat resisting alloys - Diameter 0,6 mm D 2 mm; Dimensions |
| EN 4047-2003 | 航空航天系列 镀银NI-PH2601 (因康镍合金 718)耐热镍基合金制自锁ＭＪ螺纹螺母 等级：1550 MPa (环境温度 | Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)/600℃ - Technical specification / Note: To be replaced by prEN 4047 (2003 |
| EN 4048-2003 | 航空航天系列 耐热镍基合金 NI-PH2601 (因康镍合金 718)制MoS2润滑自锁ＭＪ螺纹螺母 等级：1550 MPa (环 | Aerospace series - Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated - Classification: 1550 MPa (at ambient temperature)/425℃; Technical specification / Note: To be replaced by prEN 4048 ( |
| EN 4051-2002 | 航空航天系列 钛合金管连接 60°球形 端口连接 | Aerospace series - Pipe couplings, 60? spherical, in titanium alloy - Port connection |
| EN 4054-2003 | 航空航天系列 管连接、松套法兰和密封件 碳氟橡胶密封件和铝合金附件 技术规范 | Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy; Technical specification / Note: To be replaced by prEN 4054 (2003-05). |
| EN 4058-2001 | 航空航天系列 钛和钛合金用焊接填缝条和填缝丝 直径 0.5 mm≤D≤ 5.0 mm 尺寸 | Aerospace series - Filler rods and filler wires for welding in titanium and titanium alloys - Diameter 0.5 mm ≤ D ≤ 5.0 mm - Dimensions |
| EN 4060-2001 | 航空航天系列 耐热合金焊接用填缝条和填缝丝 直径 0.5 mm ≤D≤5.0 mm 尺寸 | Aerospace series - Filler rods and filler wires for welding in heat resisting alloys - Diameter 0.5 mm ≤ D ≤ 5.0 mm; Dimensions |
| EN 4085-2001 | 航空航天系列 镍基合金 NI-B40002(NiSi4B2) 铜焊用填缝金属非晶质箔 | Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing; Amorphous foil |
| EN 4103-2001 | 航空航天系列 镍基合金 NI-B40002(NiSi4B2) 钎焊用添缝金属硼化物箔 | Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing; Borided foil |
| EN 4104-2001 | 航空航天系列 镍基合金 NI-B40002 钎焊用添缝金属粉末和糊状 | Aerospace series - Nickel base alloy NI-B40002 - Filler metal for brazing; Powder or paste |
| EN 4105-1998 | 航空航天系列 镍基合金NI-B40002(NiSi4B2) 钎焊用添缝金属窄条带材 | Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Tape |
| EN 4114-2001 | 航空航天系列 带橡胶垫减震的铝合金环形Ｐ型卡箍 尺寸、质量 | Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions, masses |
| EN 4117-2003 | 航空航天系列 耐热镊基合金 NI-PH2601 (铬镊铁合金718)制自锁螺纹镀银双六角螺母 等级：1550 MPa (环境温 | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1 550 MPa (at ambient temperature)/600℃ / Note: To be replaced by prEN 4117 (2003-05). |
| EN 4120-2003 | 航空航天系列 耐热镍基合金 NI-PH-1302 (Waspaloy)、自锁螺纹镀银双六角螺母 等级：1200 MPa (环境温度)/ | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH-1302 (Waspaloy), sliver plated on thread - Classification: 1 210 MPa (at ambient temperature)/730℃ / Note: To be replaced by prEN 4120 (2003-05). |
| EN 4123-2003 | 航空航天系列 耐热镍基合金 NI-PH2601 HT (Inconel 718)、自锁螺纹镀银带柄螺母 等级：1550 MPa (环境温 | Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1 550 MPa (at ambient temperature)/600℃ / Note: To be replaced by prEN 4123 (2003-05). |
| EN 4124-2003 | 航空航天系列 60°型模用耐热镍基合金 NI-PH-1302 (Waspaloy)制自锁螺纹镀银带柄螺母 等级：1210 MPa (环 | Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH-1302 (Waspaloy), silver plated on thread, for 60 swage - Classification: 1 210 MPa (at ambient temperature)/730℃ / Note: To be replaced by prEN 4124 (2003-05). |
| EN 4180-2001 | 航空航天系列 流体用钛和钛合金环形管 松公差 直径4 mm≤D≤40 mm 尺寸 | Aerospace series - Circular tubes for fluids in titanium and titanium alloys - Wide tolerances; Diameter 4 mm D 40 mm; Dimensions |
| EN 4182-2001 | 航空航天系列 钛合金管连接8°30′ 轧制三通 | Aerospace series - Pipe coupling 8 Degree?30′in titanium alloy - Tees, reduced |
| EN 4183-2001 | 航空航天系列 钛合金管连接8°30′ 焊接端 ９０°弯头 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?welded ends |
| EN 4184-2001 | 航空航天系列 钛合金管连接8°30′ 焊接端 ４５°弯头 | Aerospace series - Pipe coupling 8?Degree 30′in titanium alloy - Elbows 45? welded ends |
| EN 4185-2001 | 航空航天系列 钛合金管连接8°30′ 长时间运行舱壁三通 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees bulkhead on run long |
| EN 4186-2001 | 航空航天系列 钛合金管连接8°30′四通管接头 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Unions, cross |
| EN 4187-2001 | 航空航天系列 钛合金管连接8°30′ 舱壁９０度弯头 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?bulkhead, long |
| EN 4188-2001 | 空航天系列 钛合金管连接8°30′ 焊接端舱壁９０度弯头 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Elbows 90?bulkhead, long, welded end |
| EN 4189-2001 | 空航天系列 钛合金管连接8°30′ 长舱壁三通管 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, bulkhead branch, long |
| EN 4190-2001 | 空航天系列 钛合金管连接8°30′ 管道上有推力丝螺母的异径三通 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, reduced with thrust wire nut on run |
| EN 4191-2001 | 航空航天系列 钛合金管连接8°30′长舱壁用异径三通 | Aerospace series - Pipe coupling 8?Degree 30′in titanium alloy - Tees, reduced, bulkhead branch, long |
| EN 4192-2001 | 航空航天系列 钛合金管连接8°30′ 舱壁用异径三通 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, reduced bulkhead branch |
| EN 4193-2001 | 航空航天系列 钛合金管连接8°30′ 长时运行舱壁用异径三通 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, reduced bulkhead on run long |
| EN 4194-2001 | 航空航天系列 钛合金管连接8°30′ 舱壁用异径三通 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees, reduced, bulkhead |
| EN 4233-2001 | 航空航天系列 钛合金管连接 8°30′ 焊接螺纹管接头 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Unions, welded, threaded |
| EN 4250-2001 | 航空航天系列 镍基合金 NI-B41001(NiCr19Si7B) 钎焊用填缝金属非晶质箔 | Aerospace series - Nickel base alloy NI-B41001 (NiCr19Si7B) - Filler metal for brazing; Amorphous foil |
| EN 4267-2001 | 航空航天系列 钛和钛合金圆棒 直径 6 mm≤D≤160 mm 尺寸 | Aerospace series - Round bars in titanium and titanium alloys - Diameter 6 mm ≤ D ≤ 160 mm - Dimensions |
| EN 4321-2003 | 航空航天系列 镀银耐热镍基合金 NI-PH2601 (Inconel 718)制 带安全锁线孔的细柄长螺纹双六角头螺栓 等级 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickelbase alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1550 MPa (at ambient temperature)/650℃ / Note: To be replaced by |
| EN 4322-2003 | 航空航天系列 TI-P640001阳极氧化 MoS<(Index)2>涂层制钛合金、带安全锁线孔的细柄长螺纹双六角头螺栓 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Strength class: 100 MPa (at ambient temperature) / Note: To be replaced by prEN 4322 (2003-05). |
| EN 4323-2003 | 航空航天系列 TI-P640001阳极氧化 MoS<(Index)2>涂层制钛合金 １００°埋头六角形凹槽全螺纹螺钉 等级 | Aerospace series - Screws, 100?countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Classification: 900 MPa (at ambient temperature)/350℃ / Note: To be replaced by prEN 4323 (2003-05). |
| EN 4324-2001 | 航空航天系列 铝合金AL-W42201 焊接用填缝金属杆 | Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding; Rod |
| EN 4325-2001 | 航空航天系列 耐热合金 NI-WH1302(NiCr20Co13Mo4Ti3Al) 焊接用填缝金属丝和杆 | Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3Al) - Filler metal for welding; Wire and rod |
| EN 4326-2001 | 航空航天系列 耐热合金 CO-WH4102(CoCr28W20Ni5V1) 焊接用填缝金属丝和杆 | Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding; Wire and rod |
| EN 4327-2001 | 航空航天系列 耐热合金CO-WH1401(CoCr26Ni11W8) 焊接用填缝金属丝和杆 | Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding; Wire and rod |
| EN 4329-2001 | 航空航天系列 耐热合金NI-WH0001(NiCr20) 焊接用填缝金属丝和杆 | Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding; Wire and rod |
| EN 4337-2001 | 航空航天系列 耐热合金 NI-WH8901(NiCr16Ti3Mn2) 焊接用填缝金属丝和杆 | Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding; Wire and rod |
| EN 4338-2001 | 航空航天系列 耐热合金NI-WH3902(NiCr25Mo10C) 焊接用填缝金属丝和杆 | Aerospace series - Heat resisting alloy NI-WH3902 (NiCr25Mo10C) - Filler metal for welding; Wire and rod |
| EN 4339-2001 | 航空航天系列 耐热合金 CO-WH4001(CoCr29W9) 焊接用填缝金属丝和杆 | Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding; Wire and rod |
| EN 4340-2002 | 航空航天系列 镁合金 MG-W68001 焊接用填缝金属丝和杆 | Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding; Wire and rod |
| EN 4341-2001 | 航空航天系列 铝合金 AL-W46431 焊接用填缝金属丝和杆 | Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding; Wire and rod |
| EN 4352-2003 | 航空航天系列 MoS<(Index)2> 涂层制耐热镍基合金 NI-PH2601 (Inconel 718)、带安全锁线孔的细柄长螺纹双六 | Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS<(Index)2> coated - Classification: 1550 MPa (at ambient temperature)/425℃ / Note: To be rep |
| EN 440-1994 | 焊接消耗品 非合金与细粒钢的气体保护金属电弧焊用丝状电极和沉积物 分类 | Welding consumables - Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification |
| EN 4420-2003 | 航空航天系列 FE-PA3903合金钢弹性卡子 | Aerospace series - Clips, spring tension, in alloy steel FE-PA3903 |
| EN 4549-2003 | 航空航天系列 耐热钢或耐热镍基合金联管节 焊接端头 设计结构 英制系列 | Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded; Design configuration; Inch series |
| EN 485-1-1993 | 铝和铝合金 片材、带材和板材 第1部分：检验和交货的技术条件 | Aluminium and aluminium alloys-Sheet, strip, and plate-Part 1: Technical conditions for inspection and delivery |
| EN 485-2-1994 | 铝和铝合金 片材、带材和板材 第2部分：机械性能 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| EN 485-3-2003 | 铝和铝合金 片材、带材和板材 第3部分：热轧制品的形状和尺寸公差 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
| EN 485-4-1993 | 铝和铝合金 片材、带材和板材 第4部分：冷轧制品的形状和尺寸公差 | Aluminium and aluminium alloys-Sheet, strip and plate-Part 4: Tolerances on shape and dimensions for cold-rolled products |
| EN 486-1993 | 铝和铝合金 挤压铸锭 规范 | Aluminium and aluminium alloys-Extrusion ingots-Specifications |
| EN 487-1993 | 铝和铝合金 轧锭 规范 | Aluminium and aluminium alloys- Rrolling ingots- Specifications |
| EN 499-1994 | 焊接消耗品 非合金与细粒钢的手工金属电弧焊用包剂焊条 分类 | Welding consumables - Covered electrodes for manual metal arc welding of non alloy and fine grain steels - Classification |
| EN 50052-1986+A2-1993 | 充气高压开关控制设备用铸铝合金外壳 | Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear |
| EN 50064-1989+A1-1993 | 充气高压开关控制设备用锻制铝和铝合金外壳 | Wrouhgt aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear |
| EN 50069-1991+A1-1993 | 充气高压开关设备和控制设备用铸铝合金和锻铝合金焊接的混合材料 外壳规范 | Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear |
| EN 50149-2001 | 铁路设备 固定装置 电力牵引 铜和铜合金有槽接触导线 | Railway applications - Fixed installations; Electric traction - Copper and copper alloy grooved contact wires |
| EN 50183-2000 | 架空导线 铝镁硅合金导线 | Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires |
| EN 50307-2002 | 铅与铅合金 电缆的铅与铅合金包皮和电缆套 | Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables |
| EN 515-1993 | 铝和铝合金 锻制品 韧度表示方法 | Aluminium and aluminium alloys; wrought products; Temper designations |
| EN 541-1995 | 铝和铝合金 辊压罐头、封闭塞和盖子产品 规范 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
| EN 546-1-1996 | 铝及铝合金 箔 第1部分：检验和交货的技术条件 | Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery |
| EN 546-2-1996 | 铝及铝合金 箔 第2部分：机械性能 | Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties |
| EN 546-3-1996 | 铝及铝合金 箔 第3部分：尺寸公差 | Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions |
| EN 546-4-1997 | 铝及铝合金 箔 第4部分：特殊性能要求 | Aluminium and aluminium alloys - Foil - Part 4: Special property requirements |
| EN 570-1994 | 铝和铝合金 来自于锻制品的冲击挤压铝块 规范 | Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specifications |
| EN 573-1-1994 | 铝和铝合金 锻制产品化学成分和外形 第1部分：数字标记系统 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
| EN 573-2-1994 | 铝和铝合金 锻制产品化学成分和外形 第2部分：基于标记系统的化学符号 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system |
| EN 573-3-2003 | 铝和铝合金 锻制产品化学成分和外形 第3部分：化学成分 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition |
| EN 573-4-1994 | 铝和铝合金 锻制产品化学成分和外形 第4部分：产品外形 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products |
| EN 575-1995 | 铝和铝合金 熔铸生产的母合金 规范 | Aluminium and aluminium alloys - Master alloys produced by melting - Specifications |
| EN 576-1995 | 铝和铝合金 再熔非合金铝锭 规范 | Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications |
| EN 577-1995 | 铝和铝合金 液体金属 规范 | Aluminium and aluminium alloys - Liquid metal - Specifications |
| EN 586-1-1997 | 铝和铝合金 锻件 第1部分：检验和交货的技术条件 | Aluminium and Alluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery |
| EN 586-2-1994 | 铝和铝合金 锻件 第2部分：机械特性和附加特性要求 | Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements |
| EN 586-3-2001 | 铝和铝合金 锻件 第3部分：尺寸和形状公差 | Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form |
| EN 601-1994 | 铝和铝合金 铸件 与食品接触用铸件的化学成分 | Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with food |
| EN 602-1994 | 铝和铝合金 锻制品 生产与食品接触的材料中使用的半成品的化学成分 | Aluminium and aluminium alloys - Wrought products - Chemical composition of semi products used for the fabrication of articles for use in contact with food |
| EN 603-1-1996 | 铝和铝合金 锻坯 第1部分：检验和交货的技术条件 | Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection and delivery |
| EN 603-2-1996 | 铝和铝合金 锻坯 第2部分：机械性能 | Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties |
| EN 603-3-2000 | 铝和铝合金 锻坯 第3部分：尺寸和形状公差 | Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form |
| EN 604-1-1997 | 铝和铝合金 铸锻件坯 第1部分：检查和交付的技术条件 | Aluminium and aluminium alloys - Cast forging stock - Part 1: Technical conditions for inspection and delivery |
| EN 604-2-1997 | 铝和铝合金 铸锻件坯 第2部分：尺寸和形状公差 | Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form |
| EN 610-1995 | 锡和锡合金 锡锭 | Tin and tin alloys - Ingot tin |
| EN 611-1-1995 | 锡和锡合金 锡铅合金和锡铅合金器皿 第1部分：锡铅合金 | Tin and tin alloys - Pewter and pewter ware - Part 1: Pewter |
| EN 611-2-1996 | 锡和锡合金 锡铅合金和锡铅合金器皿 第2部分：锡铅合金器皿 | Tin and tin alloys - Pewter and pewterware - Part 2: Pewterware |
| EN 61190-1-3-2002 | 电子组件的附着材料 第1-3部分：电焊用电级焊合金、熔解性及非熔解性焊料的要求 | Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications (IEC 61190-1-3:2002) / Note: Endorsement notice |
| EN 683-1-1996 | 铝和铝合金 散热片坯料 第1部分：检验和交货技术条件 | Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery |
| EN 683-2-1996 | 铝和铝合金 散热片坯料 第2部分：机械特性 | Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties |
| EN 683-3-1996 | 铝和铝合金 散热片坯料 第3部分：尺寸和形状公差 | Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form |
| EN 723-1996 | 铜和铜合金 测定铜管或配件内表面上碳含量的燃烧法 | Copper and copper alloys - Combustion method for determination of carbon on the inner surface of copper tubes or fittings |
| EN 754-1-1997 | 铝和铝合金 冷拔棒材/条材和管材 第1部分：检验和交货技术条件 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
| EN 754-2-1997 | 铝和铝合金 冷拔棒材/条材和管材 第2部分：机械特性 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
| EN 754-3-1995 | 铝和铝合金 冷拔棒材/条材和管材 第3部分：圆形棒材的尺寸和形状公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form |
| EN 754-4-1995 | 铝和铝合金 冷拔棒材/条材和管材 第4部分：方形条材的尺寸和形状公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form |
| EN 754-5-1995 | 铝和铝合金 冷拔棒材/条材和管材 第5部分：矩形棒材的尺寸和形状公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form |
| EN 754-6-1995 | 铝和铝合金 冷拔棒材/条材和管材 第6部分：六角形条材的尺寸和形状公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form |
| EN 754-7-1998 | 铝和铝合金 冷拔棒材/条材和管材 第7部分：无缝管的尺寸和形状公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
| EN 754-8-1998 | 铝和铝合金 冷拔棒材/条材和管材 第8部分：舷窗管的尺寸和形状公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form |
| EN 755-1-1997 | 铝和铝合金 挤压棒材/条材、管材和型材 第1部分：检验和交货的技术条件 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
| EN 755-2-1997 | 铝和铝合金 挤压棒材/条材、管材和型材 第2部分：机械特性 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
| EN 755-3-1995 | 铝和铝合金 挤压棒材/条材、管材和型材 第3部分：圆形棒材的尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 3: Round bars, tolerances on dimensions and form |
| EN 755-4-1995 | 铝和铝合金 挤压棒材/条材、管材和型材 第4部分：方形条材的尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 4: Square bars, tolerances on dimensions and form |
| EN 755-5-1995 | 铝和铝合金 挤压棒材/条材、管材和型材 第5部分：矩形棒材的尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 5: Rectangular bars, tolerances on dimensions and form |
| EN 755-6-1995 | 铝和铝合金 挤压棒材/条材、管材和型材 第6部分：六角形条材的尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 6: Hexagonal bars, tolerances on dimensions and form |
| EN 755-7-1998 | 铝和铝合金 挤压棒材/条材、管材和型材 第7部分：无缝管的尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
| EN 755-8-1998 | 铝和铝合金 挤压棒材/条材、管材和型材 第8部分：出口孔的尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
| EN 755-9-2001 | 铝和铝合金 挤压棒材/条材、管材和型材 第9部分：型材的尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form |
| EN 756-1995 | 焊接消耗品 非合金和细精粒钢埋弧焊用电焊条和电焊剂混合物 分类 | Welding consumables - Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification |
| EN 758-1997 | 焊接消耗品 带和不带气体保护壳的非合金钢及细粒钢金属电弧焊接用管状芯焊条 分类 | Welding consumables - Tubular cored electrodes for metal arc welding with and without a gas shield of non alloy and fine grain steels - Classification |
| EN 851-1995 | 铝和铝合金 生产烹调器具用的圆坯料 规范 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications |
| EN 941-1995 | 铝和铝合金 一般应用的圆形和圆形原料 规范 | Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications |
| EN 988-1996 | 锌和锌合金 建筑用轧制板材规范 | Zinc and zinc alloys - Specifications for rolled flat products for building |
| EN ISO 10993-15-2000 | 医疗器械的生物学评价 第15部分：金属与合金降解产物的识别与定性 | Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000) |
| EN ISO 11130-1999 | 金属与合金的腐蚀 盐溶液中的交替浸入试验 | Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:1999) |
| EN ISO 11143-1999 | 牙科设备 汞齐合金分离器 | Dental equipment - Amalgam separators (ISO 11143:1999) |
| EN ISO 11210-1995 | 铂合金首饰中含铂量的测定 氯铂酸铵沉淀后重量法 | Determination of platinum in platinum jewellery alloys - Gravimetric method after precipation of diammonium hexachloroplatinate (ISO 11210:1995) |
| EN ISO 11306-1998 | 金属与合金的腐蚀 对海水表面的金属和合金的暴露和评估准则 | Corrosion of metals and alloys - Guidelines for exposing and evaluating metals and alloys in surface sea water (ISO 11306:1998) |
| EN ISO 11426-1998 | 金合金首饰中含金量的测定 灰吹法(火试金法) | Determination of gold in gold jewellery alloys - Cupellation method (fire assay) (ISO 11426:1997) |
| EN ISO 11489-1995 | 铂合金首饰中含铂量的测定 氯化汞还原重量法 | Determination of platinum in platinum jewellery alloys - Gravimetric determination by reduction with mercury(I) chloride (ISO 11489:1995) |
| EN ISO 11490-1995 | 钯合金首饰中含钯量的测定 丁二酮肟重量法 | Determination of palladium in palladium jewellery alloys - Gravimetric determination with dimethylglyoxime (ISO 11490:1995) |
| EN ISO 12215-3-2002 | 小艇 船体结构和尺寸 第3部分：材料：钢、铝合金、木材、其它材料 | Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
| EN ISO 13680-2001 | 石油和天然气工业 用作套管、油管和接箍的防腐合金无缝钢管交货技术条件 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000) |
| EN ISO 13919-2-2001 | 焊接 电子束和激光焊接头 缺陷的质量分级指南 第2部分：铝及其可焊合金 | Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001) |
| EN ISO 14920-1999 | 热喷涂 自熔合金的喷涂及重熔 | Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:1999) |
| EN ISO 15349-2-2003 | 非合金钢 低碳含量的测定 第2部分：感应炉内燃烧后的红外线吸收法 | Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999) |
| EN ISO 1559-2001 | 牙科材料 银合金粉 | Dental materials - Alloys for dental amalgam (ISO 1559:1995 + Technical Corrigendum 1:1997) |
| EN ISO 1562-1995 | 牙科铸造含金合金 | Dental casting gold alloys (ISO 1562:1993) |
| EN ISO 196-1995 | 锻铜和铜合金 残余应力的检测 硝酸亚汞试验 | Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test (ISO 196:1978) |
| EN ISO 2566-1-1999 | 钢 伸长值的换算 第1部分：碳素钢和低合金钢 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| EN ISO 2624-1995 | 铜和铜合金 平均晶粒度的测定方法 | Copper and copper alloys - Estimation of average grain size (ISO 2624:1990) |
| EN ISO 3613-2001 | 锌、镉、铝锌合金和锌铝合金的铬酸盐转化膜 试验方法 | Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2000) |
| EN ISO 3823-1-1998 | 牙科旋转器械 牙钻 第1部分：不锈钢牙钻和硬质合金牙钻 | Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823:1997) |
| EN ISO 3927-2001 | 金属粉末 不包括硬质合金粉末 单轴向压制时压缩性的测定 | Metallic powders, excluding powders for hardmetals - Determination of compressibility in uniaxial compression (ISO 3927:2001) |
| EN ISO 4524-3-1995 | 金属覆盖层 金和金合金电镀层的试验方法 第3部分：孔隙率的电图试验 | Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 3: Electrographic tests for porosity (ISO 4524-3:1985) |
| EN ISO 4524-6-1994 | 金属覆盖层 金和金合金电镀层的试验方法 第6部分：残留盐的测定 | Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 6: Determination of the presence of residual salts (ISO 4524-6:1988) |
| EN ISO 4527-2003 | 金属覆盖层 自催化镍－磷合金电镀层 规范和试验方法 | Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003) |
| EN ISO 6509-1995 | 金属与合金的腐蚀 黄铜耐脱锌性的测定 | Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) |
| EN ISO 683-17-1999 | 热处理钢、合金钢和易切钢 第17部分：滚球和滚柱轴承钢 | Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:1999) |
| EN ISO 6871-1-1996+AC-1998 | 牙科贱金属铸造合金 第1部分：钴基合金 | Dental base metal casting alloys - Part 1: Cobalt-based alloys (ISO 6871-1:1994) |
| EN ISO 6871-2-1996 | 牙科贱金属铸造合金 第2部分：镍基合金 | Dental base metal casting alloys - Part 2: Nickel-based alloys (ISO 6871-2:1994) |
| EN ISO 7441-1995 | 金属与合金的腐蚀 户外暴露腐蚀试验中双金属腐蚀的测定 | Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests (ISO 7441:1984) |
| EN ISO 7488-1995 | 牙科银汞合金搅拌器 | Dental amalgamators (ISO 7488:1991) |
| EN ISO 7539-1-1995 | 金属与合金的腐蚀 应力腐蚀试验 第1部分：试验程序的通用指南 | Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:1987) |
| EN ISO 7539-2-1995 | 金属与合金的腐蚀 应力腐蚀试验 第2部分：弯梁试样的制备和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimen (ISO 7539-2:1989) |
| EN ISO 7539-3-1995 | 金属与合金的腐蚀 应力腐蚀试验 第3部分：U型弯曲试样的制备和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 3: Preparation and use of U-bend specimens (ISO 7539-3:1989) |
| EN ISO 7539-4-1995 | 金属与合金的腐蚀 应力腐蚀试验 第4部分：轴向载荷拉伸试样的制备和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and use of uniaxially loaded tension specimens (ISO 7539-4:1989) |
| EN ISO 7539-5-1995 | 金属与合金的腐蚀 应力腐蚀试验 第5部分：C－环行试样的制备和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 5: Preparation and use of C-ring specimens (ISO 7539-5:1989) |
| EN ISO 7539-6-2003 | 金属与合金的腐蚀 应力腐蚀试验 第6部分：预裂纹试样的制备和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement (ISO 7539-6:2003) |
| EN ISO 7539-7-1995 | 金属与合金的腐蚀 应力腐蚀试验 第7部分：慢速率应力试验 | Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing (ISO 7539-7:1989) |
| EN ISO 7787-2-2000 | 牙科旋转器械 切割刀具 第2部分：技工室用硬质合金刀具 | Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000) |
| EN ISO 7787-4-2002 | 牙科旋转器械 切割刀具 第4部分：微型技工室用硬质合金刀具 | Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters (ISO 7787-4:2002) |
| EN ISO 8044-1999 | 金属与合金的腐蚀 基本术语和定义 | Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:1999) |
| EN ISO 8282-1997 | 牙科设备 汞及合金混和器和调节器 | Dental equipment - Mercury and alloy mixers and dispensers (ISO 8282:1994) |
| EN ISO 8442-7-2000 | 与食品接触的材料和制品 刀具与凹形餐具 第7部分：银、其他贵金属及其合金制餐刀的要求 | Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Specification for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000) |
| EN ISO 8565-1995 | 金属与合金 大气腐蚀试验 野外试验的一般要求 | Metals and alloys - Atmospheric corrosion testing - General requirements for field tests (ISO 8565:1992) |
| EN ISO 8891-2000 | 贵金属含量至少为25%但不低于75%的牙科用铸造合金 | Dental casting alloys with noble metal content of at least 25 % but less than 75 % (ISO 8891:1998) |
| EN ISO 9400-1995 | 镍基合金 抗晶间腐蚀性的测定 | Nickel-based alloys - Determination of resistance to intergranular corrosion (ISO 9400:1990) |
| EN ISO 9606-3-1999 | 焊工的认可试验 熔焊 第3部分：铜和铜合金 | Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) |
| EN ISO 9606-4-1999 | 焊工的认可试验 熔焊 第4部分：镍及镍合金 | Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
| EN ISO 9606-5-2000 | 焊工的认可试验 熔焊 第5部分：钛及钛合金、锆和锆合金 | Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
| EN ISO 9692-3-2001 | 焊接和相关工艺 接头制备的建议 第3部分：铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000) |
| ENV 12908-1997 | 铅和铅合金 带火花激励的光发射光谱（OES）分析 | Lead and lead alloys - Analysis by Optical Emission Spectrometry (OES) with spark excitation |
| ENV 13797-2000 | 防腐蚀 用于油和气生产中含硫化氢环境中的的碳钢和低合金钢 材料和试验方法 导则 | Corrosion protection - Carbon and low alloy steels for use in hydrogen sulfide containing environments in oil and gas production - Materials and test methods; Guidelines |
| ENV 13800-2000 | 铅和铅合金 无需铅质型片分离的火焰原子吸收光谱（FAAS）或电感耦合等离子体发射光谱（ICP-ES） 分析 | Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) without separation of the lead matrix |
| ENV 14029-2001 | 铅及铅合金 铅块分离后用火焰原子吸收光谱法或电感耦合等离子体原子发射光谱法分析 | Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES), after separation of the lead matrix |
| ENV 14138-2001 | 铅及铅合金 共沉淀分离后用感应耦合等离子发射光谱测定法或火焰原子吸收光谱测定法进行分析 | Lead and lead alloys - Analysis by flame atomic absorption spectrometry (FAAS) or inductively coupled plasma emission spectrometry (ICP-ES) after separation by co-precipitation |
| prEN 10017-2000 | 拉制和/或冷轧用非合金钢棒材 尺寸和公差 | Non-alloy steel rod for drawing and/or cold rolling - Dimensions and tolerances |
| prEN 10025-2-2000 | 热轧结构钢制品 第2部分：非合金结构钢的交货技术条件 | Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels |
| prEN 10184-2001 | 黑色金属材料的化学分析 非合金钢和铁中磷的测定 分光光度法 | Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
| prEN 10253-2-1999 | 对缝焊管配件 第2部分：具有特殊检验要求的锻制碳和铁素体合金钢 | Butt welding pipe fittings - Part 2: Wrought carbon and ferritic alloy steel with specific inspection requirements |
| prEN 10255-2002 | 适用于焊接和加工螺纹的非合金钢管 交货技术条件 | Non-alloy steel tubes suitable for welding or threading - Technical delivery conditions |
| prEN 10294-1-1998 | 加工用空心棒材 交货技术条件 第1部分：非合金钢和合金钢 | Hollow bars for machining - Technical delivery conditions - Part 1: Non-alloy and alloy steels |
| prEN 10315-1999 | 采用“逼近技术”法用X射线荧光光谱仪分析高合金钢的常规方法 | Routine method for analysis of high alloy steel by X-ray Fluorescence Spectrometry (XRF) by using a "near by technique" method |
| prEN 12206-1-2001 | 色漆和清漆 建筑用途的铝和铝合金涂层 第1部分：由粉末涂料的配制涂层 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from powder coating materials |
| prEN 12258-2-2001 | 铝和铝合金 术语和定义 第2部分：化学分析 | Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis |
| prEN 12441-7-2003 | 锌和锌合金 化学分析 第7部分：用原子吸收光谱/氢化物产生法测定锡 | Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin; Flame atomic absorption spectrometric method after extraction |
| prEN 12441-8-2002 | 锌和锌合金 化学分析 第8部分：用电感耦合等离子原子发射光谱测定铅、铁和铝 | Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc; Flame atomic absorption spectrometric method |
| prEN 12502-2-2001 | 金属材料的防腐 输水系统中的可能出现的腐蚀 第２部分：铜和铜合金影响因素的评价 | Protection of metallic materials against corrosion - Corrosion likelihood in water conveying systems - Part 2: Review of the influencing factors for copper and copper alloys |
| prEN 12502-5-2001 | 金属材料的防腐 输水系统中的可能出现的腐蚀 第５部分：铸铁 铸铁、非合金钢和低合金钢影响因素的评价 | Protection of metallic materials against corrosion - Corrosion likelihood in water conveying systems - Part 5: Review of influencing factors for cast iron, unalloyed and low alloyed steels |
| prEN 13547-2002 | 工业阀门 铜合金球阀 | Industrial valves - Copper alloy ball valves |
| prEN 13981-2-2001 | 铝和铝合金 铁路结构用产品，检验和交货技术条件 第2部分：板材和片材 | Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for inspection and delivery - Part 2: Plates and sheets |
| prEN 14242-2001 | 铝及铝合金 化学分析 感应耦合等离子发射光谱分析 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| prEN 14286-2001 | 铝及铝合金 危险货物运输和贮存罐的可焊轧制产品 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods |
| prEN 14287-2001 | 铝及铝合金 制造包装及包装部件用铝材化学成分的特殊要求 | Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components |
| prEN 14290-2001 | 锌及锌合金 二次加工的原材料 | Zinc and zinc alloys - Secondary raw materials |
| prEN 14361-2001 | 铝及铝合金 化学分析 金属熔化取样 | Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts |
| prEN 14392-2003 | 铝及铝合金 与食物接触的阳极处理产品的特殊要求 | Aluminium and aluminium alloys - Special requirements for anodised products for use in contact with food |
| prEN 14403-2002 | 首饰和有关产品中贵金属合金的取样 | Sampling of the precious metal alloys in jewellery and associated products |
| prEN 14436-2002 | 铜及铜合金 电解镀锡带 | Copper and copper alloys - Electrolytically tinned strip |
| prEN 1958-1995 | 用于珠宝和有关产品的贵重金属及其合金的装饰涂层 | Precious metal and precious metal alloy decorative coatings used in jewellery and associated products |
| prEN 2003-10-1997 | 航空航天系列 钛和钛合金 试验方法 第10部分：测定含氢量的取样 | Aerospace series - Titanium and titanium alloys - Test methods - Part 10: Sampling for determination of hydrogen content |
| prEN 2004-2-1997 | 航空航天系列 铝和铝合金产品试验方法 第2部分：电镀、锻造和挤压的超声试验 | Test methods for aluminium and aluminium alloy products - Part 2: Ultrasonic testing of plates, forgings and extrusions; Aerospace series |
| prEN 2051-1977 | 航空航天系列 L型材 铝合金褶皱截面 尺寸 | L-section; aluminium alloy folded profiles; dimensions; aerospace series |
| prEN 2052-1977 | 航空航天系列 L型材 具有内唇状凸缘的铝合金褶皱截面 尺寸 | L-section; aluminium alloy folded profiles with internally lipped flanges; dimensions; aerospace series |
| prEN 2053-1977 | 航空航天系列 U型材 铝合金褶皱截面 尺寸 | U-section; aluminium alloy folded profiles; dimensions; aerospace series |
| prEN 2054-1977 | 航空航天系列 U型材 具有外唇状凸缘的铝合金褶皱截面 尺寸 | U-section; aluminium alloy folded profiles with externally lipped flanges; dimensions; aerospace series |
| prEN 2055-1977 | 航空航天系列 U型材 具有内唇状凸缘的铝合金褶皱截面 尺寸 | U-section; aluminium alloy folded profiles with internally lipped flanges; dimensions; aerospace series |
| prEN 2056-1977 | 航空航天系列 Z型材 铝合金褶皱截面 尺寸 | Z-section; aluminium alloy folded profiles; dimensions; aerospace series |
| prEN 2057-1977 | 航空航天系列 Z型材 具有一个唇状凸缘的铝合金褶皱截面 尺寸 | Z-section; aluminium alloy folded profiles with one lipped flange; dimensions; aerospace series |
| prEN 2059-1977 | 航空航天系列 TOP hat型材 铝合金褶皱截面 尺寸 | Top hat section; aluminium alloy folded profiles; dimensions; aerospace series |
| prEN 2060-1977 | 航空航天系列 Bowler hat型材 带唇状凸缘的铝合金褶皱截面 尺寸 | Bowler hat section; aluminium alloy folded profiles; dimensions; aerospace series |
| prEN 2061-1977 | 航空航天系列 TOP hat型材 带唇状凸缘的铝合金褶皱截面 尺寸 | Top hat section; aluminium alloy folded profiles with lipped flanges; dimensions; aerospace series |
| prEN 2084-2000 | 航空航天系列 铜和铜合金导体的一般用途的单芯电缆 技术规范 | Aerospace series - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy - Technical specification |
| prEN 2086-1998 | 航空航天系列 铝合金AL-P2618A-T851-手工锻件a≤150mm | Aerospace series - Aluminium alloy AL-P2618A-T851 - Hand forgings a 150 mm |
| prEN 2087-1998 | 航空航天系列 铝合金AL-P2014A-T6或T62-包层薄板和带材-0.4毫米a6毫米 | Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm |
| prEN 2090-1998 | 航空航天系列 铝合金AL-P2024-T3 包层薄板和带材 0.3毫米a6毫米 | Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip - 0,3 mm a 6 mm |
| prEN 2091-1976 | 航空航天系列 铝合金AL-P13P1-T4 包层薄板和带材 | Aluminium alloy AL-P13 PI-T4; clad sheets and strips; aerospace series |
| prEN 2098-1-1981 | 航天工业系列 钛及耐热合金锻制产品的检验和试验要求 第1部分：一般要求 | Aerospace series; inspection and testing requirements for titanium and heat resisting alloy wrought products; part 1: general requirements |
| prEN 2098-2-1981 | 航空航天系列 钛及耐热合金锻制产品的检验和试验要求 第2部分：薄板、和板材带材的检验和试验要求 | Aerospace series; inspection and testing requirements for titanium and heat resisting alloy wrought products; part 2: inspection and testing requirements for sheets, strips and plates |
| prEN 2098-3-1981 | 航空航天系列 钛及耐热合金锻制产品的检验和试验要求 第3部分：棒材及型材的检验和试验要求 | Aerospace series; inspection and testing requirements for titanium and heat resisting alloy wrought products; part 3: inspection and testing requirements for bars and sections |
| prEN 2098-4-1981 | 航空航天系列 钛及耐热合金锻制产品的检验和试验要求 第4部分：管材的检验和试验要求 | Aerospace series; inspection and testing requirements for titanium and heat resisting alloy wrought products; part 4: inspection and testing requirements for tubes |
| prEN 2098-5-1981 | 航空航天系列 钛及耐热合金锻制产品的检验和试验要求 第5部分：线材的检验和试验要求 | Aerospace series; inspection and testing requirements for titanium and heat resisting alloy wrought products; part 5: inspection and testing requirements for wires |
| prEN 2098-6-1981 | 航空航天系列 钛及耐热合金锻制产品的检验和试验要求 第6部分：棒材和线材紧固件的检验和试验要求 | Aerospace series; inspection and testing requirements for titanium and heat resisting alloy wrought products; part 6: inspection and testing requirements for bars and wires fasteners |
| prEN 2119-1998 | 航空航天系列 溶液处理和沉淀处理的耐热合金FE-PA2601(X6NiCrTiMoV26-15) 铆钉用线材 2毫米D< | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) solution treated and precipitation treated - Wires for rivets - 2 mm D 10 mm - Rm≥ 960 MPa |
| prEN 2123-1999 | 航空航天系列 铝合金AL-P2618-T851 板材 6mm≤a≤140mm | Aerospace series - Aluminium alloy AL-P2618A-T851 - Plate, 6 mm ≤ a ≤ 140 mm |
| prEN 2124-1999 | 航空航天系列 铝合金AL-P2214-T651 板材 6mm≤a≤140mm | Aerospace series - Aluminium alloy AL-P2214-T651 - Plate, 6 mm ≤ a ≤ 140 mm |
| prEN 2161-1999 | 航空航天系列 耐热合金 CO-CH1401 (cocr26Ni11W) 未经热处理 精密铸件 | Aerospace series - Heat resisting alloy CO-CH1401 (CoCr26Ni11W) - Not heat treated - Precision castings |
| prEN 2172-1998 | 航空航天系列 经溶液处理和淀积处理的耐热合金 FE-PA2601(X6NiCrTiMoV26-15) 锻件 D<(INDEX)e> | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) solution treated and precipitation treated - Forgings - D<(Index)e> 100 mm - Rm≥ 900 MPa |
| prEN 2173-1981 | 航空航天系列 经溶液处理和淀积处理的耐热阻抗合金 FE-PA93-HT 带材 | Heat resisting steel FE-PA93-HT, solution treated and precipitation treated; bars; aerospace series |
| prEN 2174-1998 | 航空航天系列 经溶液处理和淀积处理的耐热合金 FE-PA2601(X6NiCrTiMoV26-15) 锻件 D<(Index)e> | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) solution treated and precipitation treated - Forgings - D<(Index)e> 100 mm - Rm≥ 900 MPa |
| prEN 2175-1998 | 航空航天系列 经溶液处理和淀积处理的耐热合金 FE-PA2602(X4NiCrTiMoV26-15) 薄板材 带材 板材 D<(IN | Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) solution treated and precipitation treated - Sheet, strip and plate - 0,5 mm a 10 mm - Rm≥ 850 MPa |
| prEN 2177-1999 | 航空航天系列 经溶液处理和淀积处理的耐热合金 FE-PA2501(X4NiCrTiMoTi43-13) 锻件 D<(INDEX)e> | Aerospace series - Heat resisting alloy FE-PA2501 (X4NiCrMoTi43-13) - Solution treated and precipitation treated - Forgings - D<(Index)e> 100 mm |
| prEN 2178-1999 | 航空航天系列 经溶液处理和淀积处理的耐热阻抗合金 FE-PA2501(X4NiCrTiMoTi43-13) 溶解处理和脱溶处理 | Aerospace series - Heat resisting alloy FE-PA2501 (X4NiCrMoTi43-13) - Solution treated and precipitation treated - Bar and section - D<(Index)e> 200 mm |
| prEN 2183-1998 | 航空航天系列 经溶液处理的耐热合金 NI-PH2301(NiCr21Fe18Mo9) 锻件 D<(INDEX)e>200mm-R(IN | Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) solution treated - Forging - D<(Index)e> 200 mm |
| prEN 2184-1998 | 航空航天系列 经溶液处理的耐热合金 NI-PH2301(NiCr21Fe18Mo9) 棒材和型材 D<(INDEX)e>200m | Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) solution treated - Bar and section - D<(Index)e> 200 mm |
| prEN 2185-1998 | 航空航天系列 经溶液处理的耐热合金 NI-PH2301(NiCr21Fe18Mo9) 棒材和型材 D<(INDEX)e>200m | Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) solution treated - Bar and section - D<(Index)e> 200 mm |
| prEN 2187-1998 | 航空航天系列 经溶液处理和淀积处理的耐热合金 NI-PH1301 (NiCr19Co18Mo4Ti3Al3) 锻件 D<(Index) FE-PA | Aerospace series - Heat resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) solution treated and precipitation treated - Forgings - D<(Index)e> 200 mm - Rm≥ 1300 MPa |
| prEN 2197-1998 | 航空航天系列 经溶液处理和淀积处理的耐热合金 NI-PH1701 (NiCr15Co14Al5Ti4Mo4) 锻件 D<(Index) FE-P | Aerospace series - Heat resisting alloy NI-PH1701 (NiCr15Co14Al5Ti4Mo4) solution treated and precipitation treated - Forgings - D<(Index)e> 200 mm - Rm≥ 1250 MPa |
| prEN 2199-1998 | 航空航天系列 经溶液处理和淀积处理的耐热合金 NI-PH1303 (NiCo20Cr20Mo5Ti2Al) 棒材和型材 D<(Index | Aerospace series - Heat resisting alloy NI-PH1303 (NiCo20Cr20Mo5Ti2Al) solution treated and precipitation treated - Bar and section - D<(Index)e> 200 mm |
| prEN 2202-1998 | 航空航天系列 经溶液处理和淀积处理的耐热合金 NI-PH1303 (NiCo20Cr20Mo5Ti2Al) 无缝钢管 D | Aerospace series - Heat resisting alloy NI-PH1303 (NiCo20Cr20Mo5Ti2Al) solution treated - Seamless tube - D 50 mm, a 3 mm |
| prEN 2203-1998 | 航空航天系列 经溶液处理和淀积处理的耐热合金 NI-PH1303 (NiCo20Cr20Mo5Ti2Al) 薄板材、带材和板材 0,2 | Aerospace series - Heat resisting alloy NI-PH1303 (NiCo20Cr20Mo5Ti2Al) solution treated - Sheet, strip and plate - 0,2 mm a 10 mm |
| prEN 2204-1998 | 航空航天系列 经溶液处理和淀积处理的耐热合金 NI-PH1303 (NiCo20Cr20Mo5Ti2Al) 精密铸件 D<(Index)e> < | Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) vaccum melted, solution treated and precipitation treated - Precision casting - D<(Index)e> 50 mm |
| prEN 2233-1998 | 航空航天系列 真空熔化耐热阻抗合金Ni-CD1701 (NiCo15Cr10Al6Ti5Mo3) 未经热处理 精密铸件a or D | Aerospace series - Heat resisting alloy Ni-CD1701 (NiCo15Cr10Al6Ti5Mo3) vacuum melted - Non heat treated - Precision casting - a or D 50 mm |
| prEN 2256-1998 | 航空航天系列 铝合金AL-P2618A-T852 手工锻造a ≤ 150 mm | Aerospace series - Aluminium alloy AL-P2618A-T852 - Hand forgings a ≤ 150 mm |
| prEN 2304-1998 | 航空航天系列 经溶液处理和淀积处理的耐热合金FE-PA2601 (X6NiCrTiMoV26-15) 铸件D<(Index)e> | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) solution treated and precipitation treated - Forgings - D<(Index)e> 100 mm - Rm≥ 960 MPa |
| prEN 2327-2002 | 航空航天系列 飞行操纵杆用径向锯齿锁紧镀镉合金钢垫圈规范 尺寸 | Aerospace series - Washers, lock, with radial serrations, in alloy steel, cadmium plated for flight control rods - Dimensions |
| prEN 2345-1982 | 航空航天系列 铝和铝合金铆钉 技术规范 | Aerospace series; aluminium and aluminium alloy rivets; technical specification |
| prEN 2345-2-1999 | 航空航天系列 铝和铝合金实芯铆钉 米制系列 技术规范 | Aerospace series - Rivets, solid, in aluminium or aluminium alloy, metric series - Technical specification |
| prEN 2382-1998 | 航空航天系列 AL-P2214-T6铝合金 a 100 mm手工和模压锻件 | Aerospace series - Aluminium alloy AL-P2214-T6 - Hand and die forgings a 100 mm |
| prEN 2383-1998 | 航空航天系列 AL-P2214-T4铝合金 a 100 mm手工和模压锻件 | Aerospace series - Aluminium alloy AL-P2214-T4 - Hand and die forgings a 100 mm |
| prEN 2386-1998 | 航空航天系列 AL-P7075-T7352铝合金 a或D 150mm手工锻造 | Aerospace series - Aluminium alloy AL-P7075-T7352 - Hand forgings a 150 mm |
| prEN 2403-1998 | 航空航天系列 真空熔化耐热合金NI-CH2601 (NiCr19Fe19Nb5Mo3) 溶液处理和淀积处理 精密铸造 a或D | Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) vacuum melted - Solution treated and precipitation treated - Precision casting - a or D 50 mm |
| prEN 2405-1998 | 航空航天系列 真空熔化耐热阻抗合金NI-CH2601 (NiCr19Fe19Nb5Mo3) 溶液处理和淀积处理 精密铸造 D<(Ind | Aerospace series - Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) solution treated and precipitation treated - Forgings - D<(Index)e> 200 mm |
| prEN 2407-1998 | 航空航天系列 真空熔化耐热阻抗合金NI-CH2601 (NiCr19Fe19Nb5Mo3) 溶液处理和淀积处理 薄板材、带材和板 | Aerospace series - Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) solution treated and precipitation treated - Sheet, strip and plate - 0,2 mm a 10 mm |
| prEN 2415-1982 | 航空航天系列 镀镉合金钢制开槽/槽顶六角螺母 分类 900 MPa/235 ℃ | Aerospace series; nuts, hexagon, slotted/castellated, thin, in steel, cadmium plated; classification 900 MPa/235℃ |
| prEN 2419-1999 | 航空航天系列 铝合金AL-P2024-T351 板材 6 mm≤ a ≤ 80 mm | Aerospace series - Aluminium alloy AL-P2024-T351 - Plate, 6 mm ≤ a ≤ 80 mm |
| prEN 2485-1998 | 航空航天系列 铝合金AL-P2214 锻坯 | Aerospace series - Aluminium alloy AL-P2214 - Forging stock |
| prEN 2486-1998 | 航空航天系列 铝合金AL-P2618A 锻坯 | Aerospace series - Aluminium alloy AL-P2618A - Forging stock |
| prEN 2511-1998 | 航空航天系列 铝合金AL-P7075-T7351 板材 6 mm a 100 mm | Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate, 6 mm a 100 mm |
| prEN 2512-1999 | 航空航天系列 铝合金AL-P7175-T7351 板材 6 mm a 100 mm | Aerospace series - Aluminium alloy AL-P7175-T7351 - Plate, 6 mm a 100 mm |
| prEN 2549-1999 | 航空航天系列 润滑电镀钛合金制的短螺纹精密配合公差标定柄标定六角头螺栓 等级：大气压为1100 MPa/（环 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 2551-1999 | 航空航天系列 2117型铝合金制100°沉头圆顶实心铆钉 英制系列 | Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 2117, inch based series |
| prEN 2552-1999 | 航空航天系列 阳极氧化或铬酸盐表面处理的2117型铝合金100°沉头圆顶实心铆钉 英制系列 | Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 2117, anodized or chromated, inch based series |
| prEN 2553-1999 | 航空航天系列 2017A型铝合金制100°沉头圆顶实心铆钉 英制系列 | Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 2017A, inch based series |
| prEN 2555-1999 | 航空航天系列 5056A型铝合金制100°沉头圆顶实心铆钉 英制系列 | Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 5056A, inch based series |
| prEN 2556-1999 | 航空航天系列 阳极氧化或铬酸盐表面处理的5056A型铝合金制 100°沉头圆顶实心铆钉 英制系列 | Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series |
| prEN 258-1988 | 牙科 牙齿铸件金合金 | Dentistry; dental casting gold alloys |
| prEN 2635-1998 | 航空航天系列 Al-P2014A-T6511铝合金 a 或D≤200 mm的周围有粗粒控制的挤压杆和部件 | Aerospace series - Aluminium alloy Al-P2014A-T6511 - Extruded bar and section - a or D ≤ 200 mm - With peripheral coarse grain control |
| prEN 2647-1997 | 航空航天系列 二硫化钼（MoS2） 润滑的镀镉合金钢制自锁球座六角螺母：等级 900 MPa (环境温度)/235℃ | Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235℃ |
| prEN 2662-1997 | 航空航天系列 NI-PH3601 (NiCr22Mo9Nb) 退火抗热合金薄板、带和板 0,2 mm≤ a≤ 10 mm | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) annealed - Sheet, strip and plate - 0,2 mm a 10 mm |
| prEN 2663-1997 | 航空航天系列 NI-PH3601 (NiCr22Mo9Nb)固溶处理溶液抗热合金薄板、带和板 0,2 mm ≤ a≤ 10 mm | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) solution treated - Sheet, strip and plate - 0,2 mm a 10 mm |
| prEN 2680-1998 | 航空航天系列 镀镉 MoS2润滑合金钢自调整双耳自锁自定位系紧螺母 等级：900 MPa (环境温度)/235℃ | Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235℃ |
| prEN 2681-1998 | 航空航天系列 AL-P7010-T74铝合金 手工锻件和硬模锻件 a ≤150 mm | Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings a 150 mm |
| prEN 2682-1998 | 航空航天系列 AL-P7010-T7452铝合金 手工锻件和硬模锻件 a≤ 150 mm | Aerospace series - Aluminium alloy AL-P7010-T7452 - Hand and die forgings a 150 mm |
| prEN 2683-1998 | 航空航天系列 AL-P7010-T7651铝合金 手工锻件和硬模锻件 a ≤ 150 mm | Aerospace series - Aluminium alloy AL-P7010-T7651 - Hand forgings a 150 mm |
| prEN 2684-1999 | 航空航天系列 AL-P7010-T7651铝合金 板材 6 mm ≤ a ≤ 140 mm | Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate 6 mm a 140 mm |
| prEN 2686-1998 | 航空航天系列 AL-P7010-T7451铝合金 手工锻件 a ≤ 150 mm | Aerospace series - Aluminium alloy AL-P7010-T7451 - Hand forgings a 150 mm |
| prEN 2687-1999 | 航空航天系列 AL-P7010-T7451铝合金 板材 6 mm ≤ a≤ 160 mm | Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate 6 mm a 160 mm |
| prEN 2688-1998 | 航空航天系列 AL-P7050-T74铝合金 硬模锻件 a ≤150 mm | Aerospace series - Aluminium alloy AL-P7050-T74 - Die forgings a 150 mm |
| prEN 2690-1998 | 航空航天系列 AL-P7050-T7452铝合金 手工锻件 a ≤ 200 mm | Aerospace series - Aluminium alloy AL-P7050-T7452 - Hand forgings - a 200 mm |
| prEN 2702-1998 | 航空航天系列 AL-P6061-T6或T62铝合金 拔拉或挤压杆和型材 a 或 D ≤ 150 mm | Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Drawn or extruded bar and section - a or D ≤ 150 mm |
| prEN 2726-2001 | 航空航天系列 AL-C42201 T6铝合金 沙模铸件 a ≤20 mm | Aerospace series - Aluminium alloy AL-C42201 T6 - Sand casting a 20 mm |
| prEN 2728-2001 | 航空航天系列 AL-C42101 T6铝合金 沙模铸件 a ≤20 mm | Aerospace series - Aluminium alloy AL-C42101 T6 - Sand casting a 20 mm |
| prEN 2802-1999 | 航空航天系列 AL-P7475-T761铝合金 薄板和带材 0,6 mm ≤a≤6 mm | Aerospace series - Aluminium alloy AL-P7475-T761 - Sheet and strip 0,6 mm a 6 mm |
| prEN 2803-1999 | 航空航天系列 AL-P7475-T761铝合金 复合薄板和带材1 mm ≤a ≤ 6 mm | Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip 1 mm a 6 mm |
| prEN 2804-1999 | 航空航天系列 AL-P7075-T7651铝合金 板材6 mm ≤ a ≤ 25 mm | Aerospace series - Aluminium alloy AL-P7075-T7651 - Plate, 6 mm a 25 mm |
| prEN 2805-1999 | 航空航天系列 AL-P7475-T7651铝合金 板材6 mm≤a≤40 mm | Aerospace series - Aluminium alloy AL-P7475-T7651 - Plate, 6 mm a 40 mm |
| prEN 2813-1999 | 航空航天系列 AL-P6061-T6铝合金 压力用拉管 0,6 mm≤a≤12,5 mm | Aerospace series - Aluminium alloy AL-P6061-T6 - Drawn tube for pressure applications 0,6 mm a 12,5 mm |
| prEN 2858-1-1993 | 航空航天系列 钛和钛合金 锻坯和锻件 技术规范第１部分：一般要求 | Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 1: general requirements |
| prEN 2858-2-1993 | 航空航天系列 钛和钛合金 锻坯和锻件 技术规范第２部分：锻坯 | Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 2: forging stock |
| prEN 2858-3-1993 | 航空航天系列 钛和钛合金 锻坯和锻件 技术规范第３部分：锻件预生产和生产 | Aerospace series; titanium and titanium alloys; forging stock and forgings; technical specification; part 3: pre-production and production forgings |
| prEN 2859-1999 | 航空航天系列 镀镉合金钢标准六角头紧公差普通柄短螺纹螺栓 等级：1100MPa(环境温度)/235℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃ |
| prEN 287-3-1995 | 焊机的合格性测试 熔焊 第3部分：铜和铜合金（ISO/DIS 9606-3:1995） | Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO/DIS 9606-3:1995) |
| prEN 287-4-1995 | 焊机的合格性测试 熔焊 第4部分：镍和镍合金 （ISO/DIS 9606-4:1995） | Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO/DIS 9606-4:1995) |
| prEN 2878-1998 | 航空航天系列 用MoS2润滑镀镉合金钢制扩口双耳状浮线密封耐空气（腐蚀）自锁系紧螺母 等级：900 MPa (环 | Aerospace series - Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235℃ |
| prEN 2880-1998 | 航空航天系列 用MoS2润滑镀镉合金钢制扩口双耳状浮线密封耐燃油自锁系紧螺母 等级：900 MPa (环境温度)/1 | Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/120℃ |
| prEN 2889-1999 | 航空航天系列 镀镉合金钢标准六角头紧公差普通柄短螺纹螺栓 等级：900 MPa（环境温度）235 ℃ | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃ |
| prEN 2959-1999 | 航空航天系列 NI-PH1302 (NiCr20Co13Mo4Ti3Al)耐热合金固溶处理和冷加工 锻造紧固件用棒材3 mm≤D≤30 mm | Aerospace series - Heat resisting alloy NI-PH1302 (NiCr20Co13Mo4Ti3Al) - Solution treated and cold worked - Bar for forged fasteners 3 mm D 30 mm |
| prEN 3080-2000 | 航空航天系列 钛合金管连接件8°30′带可靠金属丝螺母的异形分支三通管 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees, reduced branch with trust wire nut |
| prEN 3115-2000 | 航空航天系列 AL-P7050铝合金铆钉用铝丝 D≤10 mm | Aerospace series - Aluminium alloy AL-P7050 - Wire for rivets - D 10 mm |
| prEN 3124-2001 | 航空航天系列 AL-C42201 T6铝合金 高强度铸件 a ≤ 20 mm | Aerospace series - Aluminium alloy AL-C42201 T6 - High strength casting a 20 mm |
| prEN 3125-2001 | 航空航天系列 AL-C42201 T6铝合金 熔模铸件 a ≤20 mm | Aerospace series - Aluminium alloy AL-C42201 T6 - Investment casting a 20 mm |
| prEN 3332-1999 | 航空航天系列 铝合金 AL-P7475-T762 1 mm≤a≤6 mm复合薄板和带材 | Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip 1 mm a 6 mm |
| prEN 3333-1999 | 航空航天系列 铝合金 AL-P7475-T762 0,6 mm≤a≤6 mm复合薄板和带材 | Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip 0,6 mm a 6 mm |
| prEN 3335-1999 | 航空航天系列 铝合金 AL-P7475-O2 0,8 mm≤a≤6 mm超塑性模压板材 | Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) 0,8 mm a 6 mm |
| prEN 3336-1999 | 航空航天系列 铝合金 AL-P7150-T651 6 mm≤a≤40 mm板材 | Aerospace series - Aluminium alloy AL-P7150-T651 - Plate, 6 mm a 40 mm |
| prEN 3338-1999 | 航空航天系列 铝合金 AL-P7050-T74511a 或 D≤150 mm具有边缘粗颗粒控制挤压棒和型材 | Aerospace series - Aluminium alloy AL-P7050-T74511 - Extruded bar and section a or D 150 mm with peripheral coarse grain control |
| prEN 3339-1998 | 航空航天系列 铝合金 AL-P7010-T76 a≤200 mm模锻件 | Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a 200 mm |
| prEN 3341-1998 | 航空航天系列 铝合金 Al-P6061 T4 或 T42 0,4 mm≤a≤6 mm薄板及带材 | Aerospace series - Aluminium alloy Al-P6061-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm |
| prEN 3342-1998 | 航空航天系列 铝合金 AL-P6061 T4 或 T42 a或D ≤150 mm拉制或挤压棒和型材 | Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Drawn or extruded bar and section - a or D 150 mm |
| prEN 3344-1999 | 航空航天系列 铝合金 AL-P7050-T76511 a 或 D ≤150 mm 具有边缘粗颗粒控制挤压棒和型材 | Aerospace series - Aluminium alloy AL-P7050-T76511 - Extruded bar and section a or D 150 mm with peripheral coarse grain control |
| prEN 3346-1997 | 航空航天系列 铝合金 AL-P2014A-T3 0,6 mm≤a≤12,5 mm结构用的拉制管 | Aerospace series - Aluminium alloy AL-P2014A-T3 - Drawn tube for structural applications - 0,6 mm a 12,5 mm |
| prEN 3347-1998 | 航空航天系列 铝合金 Al-P2024-T8511 a 或 D≤150 mm 带边缘粗颗粒控制挤压棒和型材 | Aerospace series - Aluminium alloy Al-P2024-T8511 - Extruded bar and section - a or D 150 mm - With peripheral coarse grain control |
| prEN 3354-1998 | 航空航天系列 退火钛合金 TI-P64001 a≤6 mm超塑性模压薄板 | Aerospace series - Titanium alloy TI-P64001, annealed - Sheet for superplastic forming a 6 mm |
| prEN 3474-1998 | 航空航天系列 AL-P2024-T81铝合金 0,25 mm ≤a≤6 mm薄板和带材 | Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm a 6 mm |
| prEN 3510-1997 | 航空航天系列 FE-PA2602 (X4NiCrTiMoV26-15)抗热合金固溶处理和沉淀处理 棒和型材 De≤100 mm | Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) solution treated and precipitation treated - Bar and section D<(Index)e> 100 mm |
| prEN 3553-1999 | 航空航天系列 AL-P2618A-T6511铝合金 挤压棒和型材 a 或 D≤160 mm | Aerospace series - Aluminium alloy AL-P2618A-T6511 - Extruded bar and section a or D 160 mm |
| prEN 3557-1997 | 航空航天系列 AL-P6061-T4铝合金 压力用拉制管 0,6 mm ≤a≤3,0 mm | Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications 0,6 mm a 3,0 mm |
| prEN 3668-1997 | 航空航天系列 NI-PH2301 (NiCr21Fe18Mo9) 非热处理耐热合金 锻坯a 或 D≤250 mm | Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) non heat treated - Forging stock a or D 250 mm |
| prEN 3671-1997 | 航空航天系列 NI-PH3601 (NiCr22Mo9Nb)非热处理耐热合金 锻坯a 或 D≤250 mm | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) non heat treated - Forging stock a or D 250 mm |
| prEN 3719-1999 | 航空航天系列 电缆用铝和铝合金导体 产品标准 | Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard |
| prEN 3820-1999 | 航空航天系列 阳极氧化MoS2润滑的钛合金、 标准六角头松公差普通柄短螺纹螺栓 等级：1100 MPa（环境温度 | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 3876-1997 | 航空航天系列 金属材料试验方法 铜焊合金 熔化试验 | Aerospace series - Test method for metallic materials - Braze alloys - Fusion test |
| prEN 3877-1997 | 航空航天系列 金属材料试验方法 用铜焊合金的差热分析测定固线温度和液态温度 | Aerospace series - Metallic materials - Test method - Determination of solidus and liquidus temperatures by differential thermal analysis of braze alloys |
| prEN 3878-1997 | 航空航天系列 金属材料试验方法 铜焊合金 挠性试验 | Aerospace series - Test method for metallic materials - Braze alloys - Flexibility test |
| prEN 3913-1999 | 航空航天系列 部件修复用耐热镍基合金 NI-PH2601 (NI-P100HT铬镍铁合金718)、薄壁自锁短内螺纹上镀银的插 | Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), silver plated internal thread, for salvage of components |
| prEN 3914-1999 | 航空航天系列 部件修复用耐热镍基合金 NI-PH2601 (NI-P100HT铬镍铁合金718)、薄壁自锁长上镀银的插件 | Aerospace series - Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), silver plated on internal thread, for salvage of components |
| prEN 3915-1999 | 航空航天系列 部件修复用耐热镍基合金 NI-PH2601 (NI-P100HT铬镍铁合金718)、薄壁自锁ＭＪ螺纹插件 等级 | Aerospace series - Insert, thin wall, self-locking, Mj threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT,Inconel 718), for salvage of components, classification: 1275 MPa (at ambient temperature)/550℃ - Technical specification |
| prEN 3974-1998 | 航空航天系列 NI-PH8001 (NiCr20Ti) 耐热合金退火 拉制的无缝 毛细管 0,6 mm ≤D≤2,0 mm | Aerospace series - Heat resisting alloy NI-PH8001 (NiCr20Ti) - Annealed - Seamless drawn capillary tube 0,6 mm D 2,0 mm |
| prEN 3976-1999 | 航空航天系列 钛和钛合金 试验方法 氢含量确定的化学分析 | Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content |
| prEN 3982-2000 | 航空航天系列 铝合金 AL-P7050-T7451 板6 mm≤a≤160 mm | Aerospace series - Aluminium alloy AL-P7050-T7451 - Plate 6 mm a 160 mm |
| prEN 3983-2000 | 航空航天系列 铝合金AL-P7050-T7651 板6 mm≤a≤160 mm | Aerospace series - Aluminium alloy AL-P7050-T7651 - Plate 6 mm a 160 mm |
| prEN 4071-1999 | 航空航天系列 铝 IVD涂层钛合金标准六角头紧公差普通柄短螺纹螺栓 等级：1100 MPa(环境温度) /425℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃ |
| prEN 4072-1999 | 航空航天系列 铝 IVD涂层钛合金、100°埋头标准头偏十字凹槽紧公差普通柄短螺纹螺钉 等级：1100 MPa(环境 | Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃ |
| prEN 4086-1997 | 航空航天系列 非热处理耐热合金 Ni-PD2101 (NiCo14Nb5Ti2) 锻坯 a or D≤360 mm | Aerospace series - Heat resisting alloy Ni-PD2101 (NiCo14Nb5Ti2) non heat treated - Forging stock a or D 360 mm |
| prEN 4087-1998 | 航空航天系列 固溶处理和沉淀处理的Ni-PD2101 (NiCo14Nb5Ti2)耐热合金 锻件 De≤75 mm、 Rm≥1210 MPa | Aerospace series - Heat resisting alloy NI-PD2101 (NiCo14Nb5Ti2) - Solution treated and precipitation treated - Forgings D<(Index)e> 75 mm Rm≥ 1210 MPa |
| prEN 4092-1998 | 航空航天系列 空气熔炼和真空精炼 退火耐热合金 NI-PH3901 (NiCr25Mo10) 薄板和带材0,25 mm≤a≤3 mm | Aerospace series - Heat resisting alloy NI-PH3901 (NiCr25Mo10) - Air melted and vacuum refined - Annealed - Sheet and strip 0,25 mm a 3 mm |
| prEN 4093-1998 | 航空航天系列 空气熔炼和真空精炼 退火耐热合金 NI-PH3901 (NiCr25Mo10) 薄板和带材 a ≥3 mm | Aerospace series - Heat resisting alloy NI-PH3901 (NiCr25Mo10) - Air melted and vacuum refined - Annealed - Sheet, strip and plate a ≥ 3 mm |
| prEN 4094-1997 | 航空航天系列 真空熔炼非热处理Ni-CH1305 (NiCr16Co10Mo8Al4Ti4)耐热合金 再熔料 | Aerospace series - Heat resisting alloy Ni-CH1305 (NiCr16Co10Mo8Al4Ti4) vacuum melted, non heat treated - Remelting stock |
| prEN 4095-1997 | 航空航天系列 真空熔炼非热处理Ni-CH1305 (NiCr16Co10Mo8Al4Ti4)耐热合金 精密铸件 | Aerospace series - Heat resisting alloy Ni-CH1305 (NiCr16Co10Mo8Al4Ti4) vacuum melted, non heat treated - Precision castings |
| prEN 4096-1997 | 航空航天系列 真空熔炼非热处理Ni-CD1401 (NiCo10W10Cr9Al6Ta3)耐热合金 再熔料 | Aerospace series - Heat resisting alloy Ni-CD1401 (NiCo10W10Cr9Al6Ta3) vacuum melted, non heat treated - Remelting stock |
| prEN 4097-1997 | 航空航天系列 真空熔炼沉淀处理Ni-CD1401 (NiCo10W10Cr9Al6Ta3)耐热合金 精密铸件 | Aerospace series - Heat resisting alloy Ni-CD1401 (NiCo10W10Cr9Al6Ta3) vacuum melted, precipitation treated - Precision castings |
| prEN 4100-1993 | 航空航天系列 铝合金 AL-P2219-T62 薄板和带材 0,5 mm≤a≤6 mm | Aerospace series - Aluminium alloy AL-P2219-T62 - Sheet and strip 0,5 mm a 6 mm |
| prEN 4127-1999 | 航空航天系列 钛合金铝 IVD涂层、标准六角头松公差普通柄短螺纹螺栓 等级：1100 MPa (环境温度)/425 ℃ | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVDcoated - Classification: 1100 MPa (at ambient temperature)/425℃ |
| prEN 4128-1999 | 航空航天系列 耐热镍基合金铝 IVD涂层、标准六角边头松公差普通柄短螺纹螺栓 等级：1250 MPa (环境温度)/ | Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1250 MPa (at ambient temperature)/425℃ |
| prEN 4172-1999 | 航空航天系列 阳极氧化耐钛合金TI-P64001制突出头剪式紧公差锁紧螺栓 米制 等级：：1100 MPa (环境温度) | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4173-1999 | 航空航天系列 阳极氧化耐钛合金TI-P64001、100°埋头孔普通头剪式紧公差锁紧螺栓 米制 等级：：1100 MPa | Aerospace series - Lockbolts, 100?countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4174-1999 | 航空航天系列 阳极氧化或铬酸盐处理铝合金 2024、铆紧剪式垫圈 米制 | Aerospace series - Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series |
| prEN 4176-1999 | 航空航天系列 阳极氧化或有铝色涂层钛合金TI-P64001、100°埋头标准头或突出头的张力剪式紧公差锁紧螺栓、 | Aerospace series - Lockbolts, 100?countersunk normal head or protruding head, tension-sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric |
| prEN 4204-1999 | 航空航天系列 铝合金 AL-P8090-T841 薄板 0,6 mm≤a≤6 mm | Aerospace series - Aluminium alloy AL-P8090-T841 - Sheet 0,6 mm a 6 mm |
| prEN 4207-1999 | 航空航天系列 铝合金 AL-P8090-T89周围粗粒控制的挤压棒和型材 a 或 D≤15 mm | Aerospace series - Aluminium alloy AL-P8090-T89 - Extruded bar and section, a or D 15 mm with peripheral coarse grain control |
| prEN 4222-1998 | 航空航天系列 耐热合金 NI-PH1305 (NiCr22Co13Mo9Al1) 空气熔炼和真空精炼 退火 薄板和带0,25 mm≤a≤3 | Aerospace series - Heat resisting alloy NI-PH1305 (NiCr22Co13Mo9Al1) - Air melted and vacuum refined - Annealed - Sheet and strip 0,25 mm a 3 mm |
| prEN 4272-1997 | 航空航天系列 铝合金 AL-P2219-T854 锻件 a ≤200 mm | Aerospace series - Aluminium alloy AL-P2219-T854 - Die forgins, a 200 mm |
| prEN 4273-1997 | 航空航天系列 铝合金 AL-P6082-T6511 挤压棒和型材、a或 D ≤200 mm | Aerospace series - Aluminium alloy AL-P6082-T6511 - Extruded bar and section, a or D 200 mm |
| prEN 4274-1997 | 航空航天系列 铝合金 AL-P6082-T6511周围粗粒控制的挤压棒和型材 a 或 D≤200 mm | Aerospace series - Aluminium alloy AL-P6082-T6511 - Extruded bar and section, a or D 200 mm with peripheral coarse grain control |
| prEN 4275-1997 | 航空航天系列 铝合金 AL-P7075-T76511周围粗粒控制的挤压棒和型材 a 或 D ≤100 mm | Aerospace series - Aluminium alloy AL-P7075-T76511 - Extruded bar and section, a or D 100 mm with peripheral coarse grain control |
| prEN 4276-1998 | 航空航天系列 铝合金 AL-P7175-T7351 手制锻件 a ≤150 mm | Aerospace series - Aluminium alloy AL-P7175-T7351 - Hand forgings a 150 mm |
| prEN 4277-1998 | 航空航天系列 铝合金 AL-P7175-T7351 手制锻件和模件锻 a ≤125 mm | Aerospace series - Aluminium alloy AL-P7175-T73 - Hand and die forgings a 125 mm |
| prEN 4278-1998 | 航空航天系列 铝合金 AL-P7175-T7352 手制锻件和模锻件 a ≤150 mm | Aerospace series - Aluminium alloy AL-P7175-T7352 - Hand and die forgings a 150 mm |
| prEN 4282-1998 | 航空航天系列 铝合金 AL-P2219-T37 板材 6 mm ≤a≤ 40 mm | Aerospace series - Aluminium alloy AL-P2219-T37 - Plate 6 mm a 40 mm |
| prEN 4283-1998 | 航空航天系列 铝合金 AL-P2219-T87 板材 6 mm≤a≤40 mm | Aerospace series - Aluminium alloy AL-P2219-T87 - Plate 6 mm a 40 mm |
| prEN 4284-1998 | 航空航天系列 铝合金 AL-P2219-T852 锻件 a≤400 mm | Aerospace series - Aluminium alloy AL-P2219-T852 - Forgings a 400 mm |
| prEN 4285-1998 | 航空航天系列 铝合金 AL-P2219-T851 锻件a≤400 mm | Aerospace series - Aluminium alloy AL-P2219-T851 - Forgings a 400 mm |
| prEN 4287-1998 | 航空航天系列 铝合金 AL-P7010 锻坯 | Aerospace series - Aluminium alloy AL-P7010 - Forging stock |
| prEN 4288-1998 | 航空航天系列 铝合金 AL-P7050 锻坯 | Aerospace series - Aluminium alloy AL-P7050 - Forging stock |
| prEN 4289-1998 | 航空航天系列 铝合金 AL-P7175 锻坯 | Aerospace series - Aluminium alloy AL-P7175 - Forging stock |
| prEN 4290-1998 | 航空航天系列 铝合金 AL-P2219 锻坯 | Aerospace series - Aluminium alloy AL-P2219- - Forging stock |
| prEN 4293-1998 | 航空航天系列 铝合金 AL-P7175-T73511 挤压棒和型材a 或 D≤150 mm | Aerospace series - Aluminium alloy AL-P7175-T73511 - Extruded bar and section a or D 150 mm |
| prEN 4294-1998 | 航空航天系列 铝合金 AL-P7175-T7354 模锻件a≤150 mm | Aerospace series - Aluminium alloy AL-P7175-T7354 - Die forgings a 150 mm |
| prEN 4313-1998 | 航空航天系列 铝合金 AL-P6013-T6 薄板和带 0,5 mm≤a≤ 6 mm | Aerospace series - Aluminium alloy AL-P6013-T6 - Sheet and strip 0,5 mm a 6 mm |
| prEN 4314-1997 | 航空航天系列 非热处理耐热合金 FE-PA2602 (X4NiCrTiMoV26-15) 锻坯 a 或 D ≤250 mm | Aerospace series - Heat resisting alloy FE-PA2602 (X4NiCrTiMoV26-15) non heat treated - Forging stock a or D 250 mm |
| prEN 4315-1997 | 航空航天系列 耐热合金 FE-PA2601 (X6NiCrTiMoV26-15) 固熔处理和沉淀处理 棒和型材 a 或 D ≤100 mm R | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Bar and sections a or D 100 mm R<(Index)m> a ≥ 900 MPa |
| prEN 4317-2000 | 航空航天系列 非热处理耐热合金 FE-PA2601 (X6NiCrTiMoV26-15) 锻坯 a 或D≤200 mm | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Non heat treated - Forging stock a or D 200 mm |
| prEN 4318-1997 | 航空航天系列 FE-PA2601 (X6NiCrTiMoV26-15)固溶处理和沉淀处理耐热合金 棒和型材 De≤100 mm、 Rm≥960 | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) solution treated and precipitation treated - Bar and section D<(Index)e> 100 mm, Rm≥ 960 MPa |
| prEN 4360-2000 | 航空航天系列 阳极氧化或铬酸盐处理铝合金 7050、制１００°带圆顶短头实心铆钉 米制 | Aerospace series - Rivets, solid, 100?countersunk reduced head with dome, in aluminium alloy 7050, anodized or chromated - Metric series |
| prEN 4361-2000 | 航空航天系列 阳极氧化或铬酸盐处理铝合金 5056A、制１００°带圆顶短头实心铆钉 米制 | Aerospace series - Rivets, solid, 100?countersunk reduced head with dome, in aluminium alloy 5056A, anodized or chromated - Metric series |
| prEN 4362-1999 | 航空航天系列 钛合金 Ti 44,5 Cb、制１００°埋头短头实心铆钉 米制 | Aerospace series - Rivets, solid, 100?countersunk reduced head, in titanium alloy Ti 44,5 Cb, metric series |
| prEN 4363-1999 | 航空航天系列 带铝色涂层钛合金 Ti 44,5 Cb、制１００°埋头短头实心铆钉 米制 | Aerospace series - Rivets, solid, 100?countersunk reduced head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating, metric series |
| prEN 4368-1997 | 航空航天系列 非热处理耐热合金 Ni-CD1701 (NiCo15Cr10Al6Ti5Mo3) 再熔化料 | Aerospace series - Heat resisting alloy Ni-CD1701 (NiCo15Cr10Al6Ti5Mo3) non heat treated - Remelting stock |
| prEN 4369-1997 | 航空航天系列 固溶处理和沉淀处理耐热合金 NI-PH1701 (NiCr15Co14Al5Ti4Mo4) 棒材和型材 De≤100 mm | Aerospace series - Heat resisting alloy NI-PH1701 (NiCr15Co14Al5Ti4Mo4) solution treated and precipitation treated - Bar and section D<(Index)e> 100 mm |
| prEN 4370-1997 | 航空航天系列 非热处理耐热合金 NI-PH1701 (NiCr15Co14Al5Ti4Mo4) 锻坯 a 或D ≤100 mm | Aerospace series - Heat resisting alloy NI-PH1701 (NiCr15Co14Al5Ti4Mo4) non heat treated - Forging stock a or D 100 mm |
| prEN 4371-1997 | 航空航天系列 非热处理耐热合金 NI-PD9002 (NiCu31) 铆钉用棒D≤10 mm | Aerospace series - Heat resisting alloy NI-PD9002 (NiCu31) non heat treated - Bar for rivets D 10 mm |
| prEN 4372-1997 | 航空航天系列 非热处理耐热合金 NI-PD9002 (NiCu31) 铆钉用丝 D≤10 mm | Aerospace series - Heat resisting alloy NI-PD9002 (NiCu31) non heat treated - Wire for rivets D 10 mm |
| prEN 4373-1997 | 航空航天系列 退火的耐热合金 NI-PD9002 (NiCu31) 无缝管 D ≤75 mm、a ≤3 mm | Aerospace series - Heat resisting alloy NI-PD9002 (NiCu31) annealed - Seamless tube D 75 mm, a 3 mm |
| prEN 4374-1997 | 航空航天系列 固溶处理和沉淀处理耐热合金 NI-PH1301 (NiCr19Co18Mo4Ti3Al3) 棒材和型材 De≤200 mm | Aerospace series - Heat resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) solution treated and precipitation treated - Bar and section D<(Index)e> 200 mm |
| prEN 4375-1997 | 航空航天系列 非热处理耐热合金 NI-PH1301 (NiCr19Co18Mo4Ti3Al3) 锻坯 a 或D≤250 mm | Aerospace series - Heat resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) non heat treated - Forging stock a or D 250 mm |
| prEN 4376-1997 | 航空航天系列 固溶处理和沉淀处理耐热合金 NI-PH2601 (NiCr19Fe19Nb5Mo3) 棒材和型材 a 或D≤2０0 mm | Aerospace series - Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) solution treated and precipitation treated - Bar and section D<(Index)e> 200 mm |
| prEN 4377-1997 | 航空航天系列 非热处理耐热合金 NI-PH2601 (NiCr19Fe19Nb5Mo3) 锻坯 a 或D≤300 mm | Aerospace series - Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) non heat treated - Forging stock a or D 300 mm |
| prEN 4378-1997 | 航空航天系列 固溶处理和沉淀处理耐热合金 NI-PH2601 (NiCr19Fe19Nb5Mo3) 铆钉用丝 D≤1,6 mm | Aerospace series - Heat resisting alloy NI-PH2601 (NiCr19Fe19Nb5Mo3) solution treated and precipitation treated - Wire for rivets D 1,6 mm |
| prEN 4379-1997 | 航空航天系列 固溶处理耐热合金 NI-PH3601 (NiCr22Mo9Nb) 锻件 De≤200 mm | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) solution treated - Forging D<(Index)e> 200 mm |
| prEN 4380-1997 | 航空航天系列 固溶处理耐热合金 NI-PH3601 (NiCr22Mo9Nb) 棒材和型材 De≤200 mm | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) solution treated - Bar and section D<(Index)e> 200 mm |
| prEN 4381-1997 | 航空航天系列 固溶处理耐热合金 NI-PH3601 (NiCr22Mo9Nb) 结构用无缝管 D≤50 mm、a≤3 mm | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) solution treated - Seamless tubes for structured application D 50 mm, a 3 mm |
| prEN 4382-1997 | 航空航天系列 固溶处理耐热合金 NI-PH3601 (NiCr22Mo9Nb) 液压用无缝管 D≤50 mm、a≤3 mm | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) solution treated - Seamless tubes for hydraulic application D 50 mm, a 3 mm |
| prEN 4383-1997 | 航空航天系列 非热处理的耐热合金NI-CH2601(NiCr19FeNB5Mo3) 再熔材料 | Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) non heat treated - Remelting stock |
| prEN 4384-1997 | 航空航天系列 非热处理的耐热合金NI-CH1303(NiCo20Mo5Ti2Al) 再熔材料 | Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) non heat treated - Remelting stock |
| prEN 4400-1-1999 | 航空航天系列 铝和铝合金锻制品 技术规范 第1部分：板材 | Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 1: Plate |
| prEN 4400-2-2000 | 航空航天系列 铝和铝合金锻制品 技术规范 第2部分：薄板、带材 | Aerospace series - Aluminium and aluminium alloy wrought products; technical specification - Part 2: Sheet and strip |
| prEN 4400-3-2001 | 航空航天系列 铝和铝合金锻制品 技术规范 第３部分：棒材和型材 | Aerospace series; Aluminium and aluminium alloy wrought products; Technical specification - Part 3: Bar and section |
| prEN 4401-1999 | 航空航天系列 米制有铝色涂层钛合金TI-P64001紧公差剪式突头锁紧螺栓 等级：1100 MPa (常温)/315℃ | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4402-1999 | 航空航天系列 米制有铝色涂层钛合金TI-P64001紧公差剪式100度埋头标准头锁紧螺栓 等级：1100 MPa (常温)/ | Aerospace series - Lockbolts, 100?countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4403-1999 | 航空航天系列 有铝色涂层钛合金Ti44, 5 Cb100度埋头标准头实心铆钉 米制 | Aerospace series - Rivets, solid, 100?countersunk normal head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating - metric series |
| prEN 4404-1999 | 航空航天系列 有铝色涂层钛合金Ti44, 5 Cb通用头实心铆钉 米制 | Aerospace series - Rivets, solid, universal head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating - metric series |
| prEN 4407-1997 | 航空航天系列 有IVD铝涂层的钛合金全螺纹头标准六角螺栓 等级：1100 MPa(常温)/315度 | Aerospace series - Bolts, normal hexagonal head, threaded to head, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃ |
| prEN 4409-1998 | 航空航天系列 铝和铝合金挤制方杆 厚度6 mm≤a≤200 mm-尺寸 | Aerospace series - Square bars, extruded in aluminium and aluminium alloys - Thickness 6 mm a 200 mm - Dimensions |
| prEN 4410-1998 | 航空航天系列 铝和铝合金挤制矩形杆 厚度为6 mm≤a≤160 mm 尺寸 | Aerospace series - Rectangular bars, extruded in aluminium and aluminium alloys - Thickness 6 mm a 160 mm - Dimensions |
| prEN 4419-1997 | 航空航天系列 镀镉合金钢镗孔倒角垫圈 | Aerospace - Washers, chamfered, with counterbore, in alloy steel, cadmium plated |
| prEN 4421-2000 | 航空航天系列 带有耐腐钢齿形锁紧环的涂MoS2，TI-P64001钛合金双头螺栓 强度等级：1100 MPa(环境温度下) | Aerospace series - Studs, in titanum alloy TI-P64001, MoS<(Index)2> coated, with serrated locking ring, in corrosion resisting steel - Strength class: 1100 MPa (at ambient temperature) |
| prEN 4424-1998 | 航空航天系列 钛合金可调、单叉和具有1.5*螺纹直径啮合的螺纹体的棒状端头 尺寸和荷载 | Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 * thread diameter in titanium alloys - Dimensions and loads |
| prEN 4434-1999 | 航空航天系列 用于电缆的铜或铜合金轻质导线 产品标准 | Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard |
| prEN 4435-1999 | 航空航天系列 英制系列NI-PH2301耐热镍基合金（耐热镍基合金x）埋头100°标准头实心铆钉 | Aerospace series - Rivets, solid, 100?countersunk normal head, in heat resisting nickel base alloy NI-PH2301 (Hastelloy X), inch based series |
| prEN 4448-1998 | 航空航天系列 AL-P7050-T7452铝合金 模锻件 a≥150 mm | Aerospace series - Aluminium alloy AL-P7050-T7452 - Die forgings a 150 mm |
| prEN 4449-1998 | 航空航天系列 铝合金AL-P7050-T7651 薄板0.8≤a≤6 mm | Aerospace series - Aluminium alloy AL-P7050-T7651 - Sheet 0,8 mm a 6 mm |
| prEN 4450-1998 | 航空航天系列 AL-P7050-T762铝合金 薄板 0.8≤a≤6 mm | Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet 0,8 mm a 6 mm |
| prEN 4457-1999 | 航空航天系列 AL-P7050-T7351铝合金 板 6≤a≤100 mm | Aerospace series - Aluminium alloy AL-P7475-T7351 - Plate 6 mm a 100 mm |
| prEN 4458-2000 | 航空航天系列 带有耐腐钢齿形锁紧环的涂MoS2TI-P64001钛合金、MJ螺纹双头螺栓 强度等级：1100 MPa(环境温 | Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001, MoS<(Index)2> coated, with serrated locking ring in corrosion resisting steel - Strength class: 1100 MPa (at ambient temperature); Technical specification |
| prEN 4459-2000 | 航空航天系列 带有耐腐钢齿形锁紧环的TI-P64001钛合金双头螺栓 设计标准 | Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Design standard |
| prEN 4460-2000 | 航空航天系列 带有耐腐钢齿形锁紧环的TI-P64001钛合金双头螺栓 安装和拆卸程序 | Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Installation and removal procedure |
| prEN 4493-2000 | 航空航天系列 NI-PH1801(NI-P96HT, Nimonic 90)镀银耐热镍基合金的螺纹螺旋圈状螺旋 自锁插件 | Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH1801 (NI-P96HT, Nimonic 90), silver plated |
| prEN 4495-1999 | 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹 标准六角头螺栓 等级：1100 MPa (环境温度下)/31 | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4496-1999 | 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹十字形埋头100度 标准头螺钉 等级：1100 MPa (环 | Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4497-1999 | 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹十字口锥形头螺钉 等级：1100 MPa (环境温度下)/31 | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4498-1999 | 航空航天系列 铝涂层钝化耐热镍基合金紧公差标准体中长螺纹大双头六角头螺栓 等级：1550 MPa (环境温度下 | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1550 MPa (at ambient temperature)/315℃ |
| prEN 4499-1999 | 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹十字口矮头埋头100度螺钉 等级：1100 MPa (环境温 | Aerospace series - Screws, 100?countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4501-1999 | 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹带肩薄六角头螺栓 等级：1100 MPa (环境温度下)/31 | Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4509-1999 | 航空航天系列 铝涂层阳极氧化钛合金全螺纹十字口埋头100度 标准螺钉 等级：1100 MPa (环境温度下)/315℃ | Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃ |
| prEN 4511-1999 | 航空航天系列 NI-PA2301(NiCr22FeMo)耐热合金 固溶处理和冷加工 铆钉用线材1.6 mm ≤D≤10 mm | Aerospace series - Heat resisting alloy NI-PH2301 (NiCr22FeMo) - Solution treated and cold worked - Wire for rivets - 1,6 mm D 10 mm |
| prEN 4525-1998 | 航空航天系列 铝和铝合金 试验方法 剪切试验 | Aerospace series - Aluminium and aluminium alloys - Test methods - Shear testing |
| prEN 4527-1998 | 航空航天系列 铝和铝合金制品 试验方法 应力开裂敏感度的测定 | Aerospace series - Aluminium and aluminium alloy products - Test methods - Determining susceptibility to stress-corrosion cracking |
| prEN 4566-1999 | 航空航天系列 CO-PH4101（CoCr20W15Ni）耐热合金 真空感应熔炼 固溶处理 锻件 De ≤100 mm | Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) - Vacuum melted - Solution treated - Forgings - D<(Index)e> 100 mm |
| prEN 4567-1999 | 航空航天系列 CO-PH4101（CoCr20W15Ni）耐热合金 真空感应熔炼 固溶处理 杆和型材 a或D ≤100 mm | Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) - Vacuum melted - Solution treated - Bar and section - a or D 100 mm |
| prEN 4568-1999 | 航空航天系列 CO-PH4101（CoCr20W15Ni）耐热合金 真空感应熔炼 固溶处理 薄板和带材 a≤6 mm | Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) - Vacuum melted - Solution treated - Sheet and strip - a 6 mm |
| prEN 4569-1999 | 航空航天系列 CO-PH4101（CoCr20W15Ni）耐热合金 真空感应熔炼 固溶处理 线材 D≤4 mm | Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) - Vacuum melted - Solution treated - Wire - D 4 mm |
| prEN 4570-1999 | 航空航天系列 FE-PA4901（X12CrNiCoMoW21-20）耐热合金 固溶处理 锻件 De≤100 mm | Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - Solution treated - Forgings D<(Index)e> 100 mm |
| prEN 4571-1999 | 航空航天系列 FE-PA4901（X12CrNiCoMoW21-20）耐热合金 固溶处理 杆和型材 De≤100 mm | Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - Solution treated - Bar and section - D<(Index)e> 100 mm |
| prEN 4572-1999 | 航空航天系列 FE-PA4901（X12CrNiCoMoW21-20）耐热合金 固溶处理 薄板和带材 a≤3 mm | Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - Solution treated - Sheet and strip - a 3 mm |
| prEN 4573-1999 | 航空航天系列 FE-PA4901（X12CrNiCoMoW21-20）耐热合金 固溶处理和沉淀硬化处理 杆和型材 De≤100 mm | Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - Solution treated and precipitation treated - Bar and section - D<(Index)e> 100 mm |
| prEN 4574-1999 | 航空航天系列 FE-PA4901（X12CrNiCoMoW21-20）耐热合金 固溶处理和沉淀硬化处理 锻件 De≤100 mm | Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - Solution treated and precipitation treated - Forgings - D<(Index)e> 100 mm . |
| prEN 4575-1999 | 航空航天系列 FE-PA4901（X12CrNiCoMoW21-20）耐热合金 固溶处理和去氧化皮 薄板和中厚板 3 mm＜a≤50 | Aerospace series - Heat resisting alloy FE-PA4901 (X12CrNiCoMoW21-20) - Solution treated and descaled - Sheet and plate - 3 mm a 50 mm |
| prEN 4591-2000 | 航空航天系列 MoS2润滑耐热镍基合金可调自对中自锁柱螺母 分类：1550 MPa (环境温度下)/315 | Aerospace series - Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS<(Index)2> lubricated - Classification: 1550 MPa (at ambient temperature)/315℃ |
| prEN 485-2-1999 | 铝和铝合金 片材、带材和板材 第2部分：机械性能 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| prEN 573-4-2003 | 铝和铝合金 锻制产品化学成分和外形 第4部分：产品外形 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products / Note: Intended as replacement for EN 573-4 (1994-08). |
| prEN 573-5-1999 | 铝和铝合金 锻制产品化学成分和外形 第5部分：标准化锻制产品的编纂法典 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products |
| prEN 576-2002 | 铝和铝合金 再熔非合金铝锭 规范 | Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications |
| prEN 6000-1998 | 航空航天系列 AL-P2024-T351铝合金 板 6.0 mm≤a≤55 mm 紧公差平面度 | Aerospace series - Aluminium alloy AL-P2024-T351 - Plate - 6,0 mm a 55 mm - Close-tolerances flatness |
| prEN 601-2003 | 铝和铝合金 铸件 与食品接触用铸件的化学成分 | Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff / Note: Intended as replacement for EN 601 (1994-11). |
| prEN 602-2003 | 铝和铝合金 锻制品 生产与食品接触的材料中使用的半成品的化学成分 | Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff / Note: Intended as replacement for EN 602 (1994-11). |
| prEN 6025-1998 | 航空航天系列 板材 AL-P2024铝合金 紧公差平面度 6 mm≤a≤55 mm 厚度 尺寸 | Aerospace series - Plates - Aluminium alloy 2024 - Close-tolerance flatness - Thickness 6 mm a 55 mm - Dimensions |
| prEN 6050-2001 | 航空航天系列 7050铝合金化学薄膜的剪型冲模锁紧紧公差的100度埋头的轧制销 英制系列 | Aerospace series - Pins, close tolerance, swage locking, 100?countersunk head reduced, shear type, in aluminium alloy 7050, chemical film - Inch series |
| prEN 6051-2001 | 航空航天系列 3003铝合金化学薄膜剪型冲模锁紧卡圈 英制系列 | Aerospace series - Collars, swage locking, shear type, in aluminium alloy 3003, chemical film - Inch series |
| prEN 6054-2001 | 航空航天系列 6061铝合金化学薄膜剪型冲模锁紧卡圈 英制系列 | Aerospace series - Collars, swage locking, shear type, in aluminium alloy 6061, chemical film - Inch series |
| prEN 60614-2-7-1995 | 电气装置用导管规范 第２部分：导管的特殊规范 第７节：无螺纹铝合金刚性导管 | Draft IEC 614-2-7: Conduits for electrical installations - Specification - Part 2: Particular specifications for conduits - Section 7: Rigid non-threadable conduits of aluminium alloy |
| prEN 6070-1998 | 航空航天系列 铝和铝合金 锻件 技术规范 通用要求 | Aerospace series - Aluminium and aluminium alloy - Wrought products - Technical specification - General requirements |
| prEN 6071-1998 | 航空航天系列 铝和铝合金 锻件 技术规范 中厚板 | Aerospace series - Aluminium and aluminium alloy - Wrought products - Technical specification - Plate |
| prEN 6073-1998 | 航空航天系列 金属材料 铝和铝合金 试验方法 冲击试验 | Aerospace series - Metallic materials - Aluminium and aluminium alloys - Test methods - Drop test |
| prEN 6100-2001 | 航空航天系列 7050铝合金化学薄膜的100度埋头剪型冲模锁紧的紧公差销 | Aerospace series - Pins, close tolerance, swage locking, 100?countersunk head shear type, in aluminium alloy 7050, chemical film - Inch series |
| prEN 61035-2-4-1995 | 电气装置用导管配件规范 第２部分：特殊需要 第４节：铝合金导管配件 | Draft IEC 1035-2-4: Specification for conduit fittings for electrical installations - Part 2: Particular specifications - Section 4: Conduit fittings of aluminium alloy |
| prEN 6104-2001 | 航空航天系列 铝或铝合金实心铆钉 技术规范 英制系列 | Aerospace series - Rivets, solid, in aluminium or aluminium alloy - Inch series; Technical specification |
| prEN 630-1992 | 铝及其焊接合金中的电弧焊接头 缺陷质量级别指南 | Arc-welded joints in aluminium and its weldable alloys; guidance on quality levels for imperfections (ISO/DIS 10042 modified) |
| prEN 756-2003 | 焊接消耗品 非合金和细精粒钢埋弧焊用实心、空心焊条和电焊剂混合物 分类 | Welding consumables - Solid wire, tubular cored electrodes and electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification / Note: Intended as replacement for EN 756 (1995-10). |
| prEN ISO 10806-2003 | 管道工程 皱纹软金属管用非合金及不锈钢配件 | Pipework - Fittings for corrugated metallic hoses (ISO/FDIS 10806:2003) |
| prEN ISO 14172-2003 | 焊接消耗材料 镍及镍合金手工金属电弧焊用涂剂焊条 分类 | Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO/FDIS 14172:2003) |
| prEN ISO 15156-3-2003 | 石油和天然气工业 在石油和天然气生产中用于硫化氢环境的材料 第3部分：耐裂合金(CRAs)(耐蚀合金)和其他 | Petroleum, petrochemical and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO/FDIS 15156-3:2003) |
| prEN ISO 15614-1-2003 | 金属焊接工艺的规范和验收 焊接工艺试验 第1部分：钢的电弧焊和气焊及镍和镍合金的焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO/FDIS 15614-1:2003) |
| prEN ISO 15614-2-2000 | 金属焊接工艺的规范和验收 焊接工艺试验 第2部分：铝及其合金的电弧焊 | Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2000) |
| prEN ISO 15614-5-2003 | 金属焊接工艺的规范和验收 焊接工艺试验 第5部分：钛、锆及其合金的电弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO/FDIS 15614-5:2003) |
| prEN ISO 18273-2003 | 焊接消耗材料 铝及铝合金电弧焊用丝状电极、焊丝和焊条 分类 | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO/FDIS 18273:2003) |
| prEN ISO 18274-2003 | 焊接消耗材料 镍及镍合金电弧焊用丝状及带状电极、焊丝和焊条 分类 | Welding consumables - Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys - Classification (ISO/FDIS 18274:2003) |
| prEN ISO 5817-2003 | 焊接 钢、镍、钛与其合金熔化焊接接合 不理想性质量级别 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO/FDIS 5817:2003) |
| prEN ISO 7539-7-2002 | 金属与合金的腐蚀 应力腐蚀试验 第7部分：慢速率应力试验 | Corrosion of metals and alloys - Stress corrosion testing - Part 7: Slow strain rate testing (ISO/DIS 7539-7:2002) |
| 编号 | 中文名称 | 英文名称 |